Éditeur(s) : CRILLASH : Centre de Recherches Interdisciplinaires en Lettres, Langues, Arts et Sciences Humaines
Extrait de : "Difficultés et troubles des apprentissages scolaires" : journée d'étude, le 14 mars 2013. Université des Antilles et de la Guyane
Description : Le Dr. Serge Chalon, présente le partenariat établit avec la ville de Trinité, pour mettre des tablettes numériques à disposition des parents d'élèves. Il insiste sur le fait qu'il s'agit là d'une initiative encore au stade de projet, qui nécessitera l'appui des enseignants pour sa réalisation. Afin de justifier la démarche, il souligne l'absence de plus en plus fréquente des parents au sein des activités liées à la scolarité de leurs enfants. Il introduit alors la tablette, comme une alternative qui permettrait : de diminuer la fracture numérique pour les parents, de faciliter par le biais de logiciels intuitifs, certains apprentissages précoces et permettre aux enseignants de se mettre à l'écoute des parents.
Siècle(s) traité(s) : 21
Droits : CC-BY-NC-ND - Attribution - Pas d'utilisation commerciale - Pas de modification
Permalien : http://www.manioc.org/fichiers/V13074
V13074

Éditeur(s) : ESPE de Martinique : Ecoles Supérieures du Professorat et de l'Education
Extrait de : "Lutte contre les discriminations dans l'éducation" : journée d'étude, le 4 juin 2015. Université des Antilles et de la Guyane
Description : En France, l'école ne discrimine plus officiellement les élèves selon leur sexe. Elle participe cependant à une reproduction "inconsciente" du régime de genre qui aboutit à la discrimination sociale et économique entre garçons et filles en termes d'orientation professionnelle et d'accès à l'emploi. Elle le fait par la place inégale accordée aux femmes et aux hommes dans les manuels scolaires (exemple des manuels d'histoire et de mathématiques). Elle le fait aussi par l'intermédiaire des stéréotypes de genre dont est porteur, souvent à son insu, le personnel enseignant ou éducatif (compétences et aptitudes à l'apprentissage supposées naturellement sexuées, comportements différents attendus des garçons et des filles). Il faut également s'interroger sur les réactions « genrées » à l'institution scolaire et sur la « fracture sexuée » entre la meilleure réussite scolaire des filles et le décrochage plus important des garçons et ses possibles raisons (représentations de la virilité et de la féminité, féminisation du corps enseignant, rôle contre-productif des sanctions, etc.).
Siècle(s) traité(s) : 21
Droits : CC-BY-NC-ND - Attribution - Pas d'utilisation commerciale - Pas de modification
Permalien : http://www.manioc.org/fichiers/V15230
V15230

Éditeur(s) : Université des Antilles et de la Guyane
Extrait de : Les rencontres culturelles de la BU 2013-2014. Université des Antilles et de la Guyane
Description : Patrick Odent-Allet introduit la soirée en présentant les différents intervenants. Dominique Berthet articulera sa communication autour de la notion de fragment qui apparaît comme liée à celles de montage, collage, combinaison, composites etc. Jean-Hugues Miredin, et Laurent Troudart présentent une performance dansée sur la thématique de la soirée. Place sera faite ensuite au débat.
Siècle(s) traité(s) : 21
Droits : CC-BY-NC-ND - Attribution - Pas d'utilisation commerciale - Pas de modification
Permalien : http://www.manioc.org/fichiers/V14149
V14149

Éditeur(s) : Vitale Mascardi
Extrait de : Rerum medicarum Novae Hispaniae thesaurus Vol.1 (p. 146)
Résumé : Plante impossible à identifier mais une pâte faite avec ses feuilles a été utilisée pour soigner les fractures
Siècle(s) traité(s) : 17
Permalien : http://www.manioc.org/images/BBX17011-0166i1
BBX17011-0166i1

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
In this paper, we describe an outcrop to characterize the effect of fracture spacing and type on larger scale effective elasticity, which is measured for the first time in-situ with a Schmidt hammer. The outcrop is dominated by lime mudstones and belongs to the deformation zone of the St Clement fault, in southern France. Our results suggest that small spacing of faults, open fractures and styolites leads to lesser effective Young's modulus, whereas small sealed fracture spacing leads to greater effective Young's modulus. These relationships are compatible with theoretical models of effective elasticity. Using Amadei and Savage (1993) approach, we define a non-linear model that relates Schmidt hammer rebound to spacing by fracture type. A hemisphere with a radius of 40 to similar to 200 cm is the rheological volume characterized by the Schmidt hammer. Results of model inversion demonstrate that variations of Schmidt hammer rebound over the outcrop can be used to estimate fracture type and stiffness. Stiffness of sealed fractures is 2-3 orders of magnitude greater than the stiffness of faults, stylolites and open fractures. This result is consistent with an increase of the rate of interseismic stress build-up of major faults with sealing of fractures in their damage zone.
ISSN: 0191-8141

hal-00669954
https://hal.archives-ouvertes.fr/hal-00669954
DOI : 10.1016/j.jsg.2011.09.009

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
Previous work has demonstrated that geoelectrical measurements, acquired either along the Earth’s surface or in boreholes, can be sensitive to the presence of fractures. However, a lack of numerical approaches that are well suited to modelling electric current flow in fractured media prevents us from systematically exploring the links between geoelectrical measurements and fractured rock properties. To address this issue, we present a highly computationally efficient methodology for the numerical simulation of geoelectrical data in 2.5-D in complex fractured domains. Our approach is based upon a discrete-dual-porosity formulation, whereby the fractures and rock matrix are treated separately and coupled through the exchange of electric current between them. We first validate our methodology against standard analytical and finite-element solutions. Subsequent use of the approach to simulate geoelectrical data for a variety of different fracture configurations demonstrates the sensitivity of these data to important parameters such as the fracture density, depth, and orientation.
ISSN: 0956-540X

hal-01622151
https://hal.archives-ouvertes.fr/hal-01622151
https://hal.archives-ouvertes.fr/hal-01622151/document
https://hal.archives-ouvertes.fr/hal-01622151/file/sanzGJI2017.pdf
DOI : 10.1093/gji/ggx080

Éditeur(s) : HAL CCSD Elsevier
Résumé : To contribute to the understanding of how opening-mode fractures (joints) form and open or close at depth in layered rocks, we present a 2D numerical study aiming to determine whether tensile stress can develop in pre-fractured elastic multilayers submitted to biaxial compressive strain conditions. First, we investigate the role of the elastic and geometrical properties of the layers on the development of tensile stress in models with five bonded layers and containing one open fracture in the central layer. Our results indicate that, in absence of elastic contrast (in Young's modulus) between the layers, no tensile stress develops in the models. However, when the fractured layer is stiffer than the two adjacent layers directly above and below, a lobe of horizontal tensile stress develops centered on the pre-existing fracture. The creation of this tensile stress is contingent upon the partial closing of the fracture. The levels of tensile stress and the thickness of the lobe of tensile stress increase logarithmically with an increase in the elastic contrast and are systematically larger for a larger Soft/Stiff ratio (ratio of the total thickness of the soft layers with the total thickness of the stiff layers). Second, we investigate the role of fracture interaction in the development of tensile stress in models containing a pair of open fractures. We observe that the levels of tensile stress in the region between the fractures are systematically higher than those observed in identical models containing a single fracture. This increase in tensile stress is very large for small elastic contrasts between the layers but diminishes when the elastic contrast increases. Furthermore, the spacing between the pre-existing fractures plays an important role in the stress distribution in the region between them. When the fracture spacing is equal to or lower than 1.15 times the height of the fractured layer for the experimental conditions chosen, the lobes of tensile stress centered on the fractures coalesce. This results in the formation of vast areas of tensile stress in models under remote compressive loading conditions. Such tensile areas are likely to allow the initiation and propagation of subsequent opening-mode fractures. The results obtained provide new insights into the formation of joints in layered rocks in compressive environments, with important consequences on fluid flow.
ISSN: 0040-1951

hal-00407576
https://hal.archives-ouvertes.fr/hal-00407576
DOI : 10.1016/j.tecto.2006.12.003

Éditeur(s) : HAL CCSD
Résumé : Today, one of the main challenges in the oil industry is the exploitation of new resources in naturally fractured reservoirs often located in structurally complex areas such as plate boundaries, mountain ranges or near salt structures. While numerical models of rock deformation based on continuum mechanics are becoming industry standard in providing efficient means for modelling natural fractures in reservoirs, the knowledge of past perturbed stress fields, which is referred as the type (normal, wrench or reverse), orientation and magnitude of the regional or local tectonic stresses that needs to be applied as boundary condition in numerical simulations, is often unknown or approximated.The essence of this thesis is to improve the recovery of the paleostress field needed to constrain numerical simulations. I first described and discuss through a comprehensive mechanically-based multi-parametric study how far we can rely on the commonly used paleostress inversion methods based on fault slip data and the Wallace and Bott assumptions. I then compared this method with a new generation technique based on geomechanics using field observations. Since slip markers on faults are hardly observed in core or image log, I used observed natural fracture data as main drivers for the inversion of the paleostress using geomechanically-based method. I demonstrated, through various outcrop and subsurface examples, how this can efficiently be done. Finally, I aimed at addressing the problem of polyphase fracture data sets with unknown mechanical type (joints, faults, stylolites ...) and expanded the mechanical stress inversion to the separation of tectonic phases.
Aujourd'hui, l'un des principaux défis dans l'industrie pétrolière est l'exploitation de nouvelles ressources dans les réservoirs naturellement fracturés souvent situés dans des zones structurellement complexes tels que les frontières de plaques, les chaînes de montagnes ou les structures de proches des dômes de sel. Alors que les modèles numériques de déformation des roches basée sur la mécanique des milieux continus fournissant des moyens efficaces pour la modélisation de fractures naturelles dans les réservoirs, sont devenus la norme dans l'industrie, les paléo-contraintes régionales ou locales appliquées comme condition aux limites dans les simulations numériques, définies par le régime (normal, décrochant ou inverse), l'orientation, et la magnitude des contraintes tectoniques, sont souvent inconnues ou approximées.L'essence de cette thèse est d'améliorer la prédiction du champ de paléo-contrainte nécessaire pour contraindre les simulations numériques. J’ai décrit dans un premier temps à travers une étude comparative multi-paramétrique complète basée sur la mécanique, dans quelle mesure nous pouvions compter sur les méthodes d'inversion des paléo-contraintes basées sur les hypothèses de Wallace et Bott et les données de glissement sur les failles. J’ai ensuite comparé ces méthodes avec une technique d’inversion de nouvelle génération basée sur la géomécanique en utilisant les observations de terrain. Puisque les marqueurs de glissement sur les failles sont rarement observés le long du forage, j’ai utilisé l’inversion géomécanique des contraintes pour les données de fractures naturelles observées. J’ai alors démontré, l’efficacité de cette technique à travers divers exemples d'affleurements et de subsurface. Enfin, j’ai proposé une solution afin de résoudre le problème des données de fractures polyphasées à type cinématique inconnu (joints, failles, stylolites ...) et étendu l’inversion de contrainte basée sur la géomécanique à la séparation des phases tectoniques.
https://hal.archives-ouvertes.fr/tel-01324110

tel-01324110
https://hal.archives-ouvertes.fr/tel-01324110
https://hal.archives-ouvertes.fr/tel-01324110/document
https://hal.archives-ouvertes.fr/tel-01324110/file/theselejri.pdf

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : Results are reported for an acidic water flow-through experiment conducted in a fractured argillaceous limestone sample (73% carbonates). The change in fracture geometry and related parameters is reported for six data sets obtained from synchrotron X-ray microtomography experiments. High-resolution three-dimensional images of the sample allowed quantification of the changes in fracture morphology at a spatial resolution of 6 ;μm. Mineral mass loss and permeability changes in the sample were also determined. Several physico-chemical phenomena were identified during the experiment. Initial smooth fracture surfaces evolved rapidly toward rough surfaces with uneven clay coverage due to the preferential dissolution of carbonate minerals compared to clay minerals whose dissolution rate is about 106 slower. A microporous clay coating progressively developed at the fluid-rock interface during heterogeneous dissolution of the fracture, while the global dissolution rate of the fracture walls exponentially decreased. The increase in surface roughness and the presumed reorganization of clays caused a progressive reduction in permeability. During the last flow-through stage, a large decrease in sample permeability was attributed to the large removal of clay particles; this process was responsible for a dramatic collapse of the fracture walls near the sample inlet and led to the development of preferential flow pathways. The development of the clay coating also acted as a barrier to flow and mass transfer between calcite grains and bulk solution and affected transport processes within the fracture
ISSN: 0043-1397

hal-00405333
https://hal.archives-ouvertes.fr/hal-00405333
DOI : 10.1029/2006WR005379

Éditeur(s) : HAL CCSD Elsevier
Résumé : Different types of fractures and fault rocks occur within the major normal fault zones bordering the NW of the Neogene Penedes basin (NE Spain). In the southwest part of the basin, the main fault is the Baix Penedes fault that places the Upper Jurassic-Lower Cretaceous dolomicrites of the footwall in contact with the Miocene siliciclastic sediments of the hangingwall. Within the footwall damage zone, different fracture systems and their respective associated breccias and cements have been recognized. Using a combination of structural, petrologic and geochemical analyses, we show that these fracture systems evolved from mainly tectonic to mainly karstic features during the progressive development and upward propagation of the fault. The earlier fractures and associated breccias represent the initial stages of the fault propagation, when the process zone formed around the fault tip was dominated by dilatant fracturing (fractures 1 and dilatant breccias B1). The fluid involved in this early deformation precipitated the dolomite cement Cl, in equilibrium with the host-rock in a closed hydrogeological system. Localization of frictional processes generated cataclasites and ultracataclasites along distinct second-order faults (fractures 2). In these fractures, the dolomite cement C2 precipitated in relation to the incipient opening of the hydrological system to percolating meteoric waters. The later fractures and associated breccias represent the late stages of the fault propagation. These structures (fractures 3, fractures 4 and the dilatant breccias B2) were formed when the extensional deformation reached the surface, resulting in an increasingly open hydrogeological system. At these stages, deposition of the dolomitic sediment DS and precipitation of the calcite cements C3, C4 and C5 show the circulation of freshwaters in a vadose meteoric environment, i.e. in karstic conditions.
ISSN: 0375-6742

hal-00512690
https://hal.archives-ouvertes.fr/hal-00512690
DOI : 10.1016/j.gexplo.2009.11.010

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
Fractures or discontinuities perpendicular to the least stress σ3 were generated in a synthetic rock analogue (granular, frictional, cohesive, and dilatant) material in axisymmetric extension tests. These fractures are of two types defined by the mean stress σ. When σ is very small, the fractures form through the mode I cracking at tensile σ3 equal to the material tensile strength. The fracture walls have smooth surfaces. At higher σ, these surfaces become rougher, with the topography features forming faint or delicate plumose patterns. The amplitude of the plumose topography increases with σ. The axial stress σ3 at fracturing reduces in magnitude and changes in sign with the σ increase. Thus σ3 orthogonal discontinuities can form at compressive σ3. SEM observations show that these discontinuities are deformation localization bands where the material is characterized by the heterogeneous decohesion and volume and porosity increase due to dilatancy. The band thickness is several grain sizes. At formation, the bands are not opened, so they are not mode I fractures. They become fractures with plumose fractography after the separation of the sample parts along the band. The formation mechanism of these discontinuities or fractures is not completely clear, but it is suggested that it represents a running constitutive instability in the form of dilatancy banding (with further σ increase the bands become inclined to σ1, i.e., shear). The similarity between the experimentally generated plumose surface fractures and natural joints is discussed, and it is suggested that they can be formed as propagating constitutive instabilities.
ISSN: 0148-0227

hal-00585846
https://hal.archives-ouvertes.fr/hal-00585846
DOI : 10.1029/2010JB008104

Éditeur(s) : HAL CCSD Springer Verlag (Germany) Springer Verlag
Résumé : International audience
Recent mathematical calculations allow us to define set fracture intensity (I), i.e., the amount of rock mass affected by fracture sets, independently of the investigation mode. This parameter, characteristic of each rock mass, is of much interest to describe the mechanical response of the rock mass to external influences. The aim of this work is to apply these mathematical equations on one site using measurements of three distinct fracture sets: (1) on a plane surface, (2) along a scanline, and (3) using borehole imaging, in order to evaluate and explain variability in collected data. Even if the three types of measurements give differences on absolute intensity values, they still define similar trends, i.e., the order of the fracturing impact of joint sets is the same from the three measurement methods, irrespective of the fact that obtained values are quite different from one survey method to another. We discuss the possible origins of these biases.
ISSN: 1435-9529

hal-01121556
https://hal.archives-ouvertes.fr/hal-01121556
DOI : 10.1007/s10064-014-0572-1

Éditeur(s) : Amer Geophysical Union
Résumé : A tectonic model of the evolution of the northern half of the South Fiji Basin, including the Minerva Triple Junction and Cook Fracture Zone, is developed from regional gravity, multibeam bathymetry, and a new interpretation of magnetic anomalies pinned to radiometric dates of oceanic crust in the basin. The geometry and age of a portion of the Minerva Triple Junction and the Cook-Minerva spreading center (the connection from the triple junction to the Cook Fracture Zone, which accommodated coeval opening of the Norfolk Basin), are resolved with multibeam bathymetry and magnetics. The South Fiji Basin opened from about 34 to 15 Ma in an anticlockwise sweep about an Euler pole located at the northern end of the present Lau Ridge. This rotation and a rigidly straight southeastward motion of the Three Kings Ridge were accommodated by the configuration of the triple junction changing from ridge-fault-fault to ridge-ridge-fault to ridge-ridge-ridge. During this evolution the southeastern arm of the system, the Julia Fracture Zone, underwent several transformations and the Cook-Minerva spreading center experienced repeated ridge jumps. The kinematics of the northern South Fiji Basin dictate, to a large extent, the evolution of the southern South Fiji Basin and the Norfolk Basin. This in turn leads to the interpretation of a complex trench-trench-double transform fault framework at the northern New Zealand margin, which explains most aspects of the geology, structure, and arc volcanic history of the margin and provides a radical new setting for the origin of the Northland Allochthon.
Geochemistry Geophysics Geosystems (1525-2027) (Amer Geophysical Union), 2011-02 , Vol. 12 , N. Q02004 , P. 1-20

Droits : 2011 American Geophysical Union. All Rights Reserved.
http://archimer.ifremer.fr/doc/00030/14112/11362.pdf
DOI:10.1029/2010GC003291
http://archimer.ifremer.fr/doc/00030/14112/

Éditeur(s) : Université des Antilles et de la Guyane Conseil Régional de la Guyane
Extrait de : "Léon-Gontran Damas : poète, écrivain patrimonial et postcolonial. Quels héritiers, quels héritages au seuil du XXIème siècle ?" : colloque international, les 19 et 20 avril 2012. Université des Antilles et de la Guyane
Description : L'intervenante essaie de sortir Damas du carcan francophone dans lequel on voulait l'enfermer, entre Césaire et Shengor, pour le remettre dans sa dimension de passeur, de transgresseur de frontière; de fracture linguistique, au sein de la diaspora du monde noir francophone. Ainsi, ce penseur post-colonial, se révèle être précurseur en avance sur ses contemporains à bien des égards.
Siècle(s) traité(s) : 20
Droits : CC-BY-NC-ND - Attribution - Pas d'utilisation commerciale - Pas de modification
Permalien : http://www.manioc.org/fichiers/V13249
V13249

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Both oedometric and plane-strain tests were performed with parallelepipedic samples made of synthetic granular, cohesive, frictional and dilatant rock analogue material GRAM2. For the first time parallel sets of fractures that have all the characteristics of natural joints were reproduced in the laboratory. The fractures are regularly spaced, normal to σ3, and have plumose morphology very similar to that of natural joints. These fractures can form at tensile stress σ3 much smaller in magnitude than the tensile strength of material and even at slightly compressive σ3. When mean stress σ exceeds a certain value, the fractures become oblique to σ1 (the obliquity increases with σ), forming networks of conjugate shear bands/fractures. These results of plane-strain experiments are in good agreement with those of better controlled conventional axisymmetric tests on a similar material in Chemenda et al. (2011b) and are closer to real geological situations. Both types of experiments are complementary. Their results lead to the conclusion that at least certain categories of natural fractures (including joints, and conjugate shear fractures/bands) were initiated as deformation localization bands. The band orientation is defined by the constitutive properties/parameters (notably the dilatancy factor) that are sensitive to σ.
ISSN: 0040-1951

hal-00795555
https://hal.archives-ouvertes.fr/hal-00795555
DOI : 10.1016/j.tecto.2011.11.021

Éditeur(s) : HAL CCSD
Résumé : Ocean Drilling Program Hole 1256D reached for the first time the transition zone between the sheeted dike complex and the uppermost gabbros. The recovered crustal section offers a unique opportunity to study the deepest part of the hydrothermal system in present-day oceanic crust. We present a structural analysis of electrical borehole wall images. We identified, and measured the orientations of four categories of structures: major faults, minor fractures, possibly hydrothermal veins, and dikes. All structures tend to strike parallel to the paleo-ridge axis. Three major fault zones (meter thick) and dikes are steeply dipping (~ 75° on average) outward the ridge. Centimeter-thick moderately conductive planar features are interpreted as hydrothermal veins, are organized in arrays of consistent spacing, thickness, and orientation, and are dipping about 15-20° toward the ridge. This structural pattern is interpreted as an on-axis paleohydrothermal circulation system, with vertical, dike-parallel fractures, and sub-horizontal high-temperature hydrothermal veins at the base of the sheeted dike, which was subsequently rotated ~ 15° westward around a ridge-parallel, sub-horizontal axis. This rotation can be caused by upper-crustal block rotation along a listric normal fault, and/or subsidence at the ridge axis.
Ofioliti

hal-00757592
https://hal.archives-ouvertes.fr/hal-00757592
DOI : 10.4454/ofioliti.v37i1.402

Éditeur(s) : HAL CCSD Elsevier
Résumé : We present comparative field studies in folded areas (Southern France. Moroccan Western Atlas and Abruzzo, Italy) giving new insights into fracture distribution within folded rocks of the shallow brittle crust. We show that the curvature in folds formed in brittle mechanical units is usually accommodated by multiple "dip-domain boundaries" (appearing as curvature discontinuities at fold scale) corresponding to relatively narrow and dense fracture zones, striking parallel or slightly oblique to the fold axis. They separate "dip-domains" where curvature is absent or moderate. It is shown that the dip-domain boundaries (which are obvious in the case of kink folds or box-fold anticlines) are currently present as multiple subtle hinges even when the curvature appears continuous at first sight. The nature of dip-domain boundaries is studied, they often cut through the whole thickness of the mechanical units Their internal structure varies, and a non-exhaustive typology is proposed For each type, an interpretative kinematic scenario shows how the dip-domain boundaries could initiate and develop. We suggest two kinds of origins (1) they could correspond to the reactivation of inherited, along-strike fracture zones (opening-mode fracture concentrations such as big joints, fracture corridors. Inherited faults, etc), (2) they could be created as mechanical instabilities during the fold formation (syn-folding origin), in particular through small reverse faults. In both cases, early zones of weakness localize the dip-domain boundaries, and control the Increase in curvature in association with increasing fracture density within the boundary. Because they represent well-defined vertically and axially persistent sub-seismic fracture zones generally limited to the thickness of the folded unit, dip-domain boundaries could enhance the axial permeability of folded and fractured reservoirs.
ISSN: 0191-8141

hal-00512651
https://hal.archives-ouvertes.fr/hal-00512651
DOI : 10.1016/j.jsg.2010.03.002

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Large sand intrusions often exhibit conical morphologies analogous to magmatic intrusions such as saucer-shaped or cup-shaped sills. Whereas some physical processes may be similar, we show with scaled experiments that the formation of conical sand intrusions may be favoured by the pore-pressure gradients prevailing in the host rock before sand injection. Our experiments involve injecting air into a permeable and cohesive analogue material to produce hydraulic fractures while controlling the pore pressure field. We control the state of overpressure in the overburden by applying homogeneous basal pore pressure, and then adding a second local pore pressure field by injecting air via a central injector to initiate hydraulic fractures near the injection point. In experiments involving small vertical effective stresses (small overburden, or high pore fluid overpressure), the fracturing pressure (lambda(fract)) is supralithostatic and two dipping fractures are initiated at the injection point forming a conical structure. From theoretical considerations, we predict that high values of lambda(fract), are due to strong cohesion or high pore fluid overpressure distributed in the overburden. Such conditions are favoured by the pore pressure/stress coupling induced by both pore pressure fields. The dips of cones can be accounted for elastic-stress rotation occurring around the source. Contrary to magmatic chamber models, the aqueous fluid overpressure developed in a parent sandbody (and prevailing before the formation of injectites) may diffuse into the surrounding overburden, thus favouring stress rotation and the formation of inclined sheets far from the parent source. For experiments involving higher vertical effective stresses (thick overburden or low pore fluid overpressure), the fracturing pressure is lower than the lithostatic stress, and a single fracture is opened in mode I which then grows vertically. At a critical depth, the fracture separates into two dilatant branches forming a flat cone. We make use of a P.I.V. (Particle Imaging Velocimetiy) technique to analyse plastic deformation, showing that these inclined fractures are opened in mixed modes. Close to the surface, they change into steep shear bands where fluids can infiltrate. The final morphology of the fracture network is very similar to the common tripartite architecture of various injection complexes, indicating that different mechanisms may be involved in the formation of dykes. Feeder dykes under the sill zones may open as tensile fractures, while overlying dykes may be guided by the deformation induced by the growth of sills. These deformation conditions may also favour the formation of fluid escape structures and pockmarks. (C) 2011 Elsevier B.V. All rights reserved.
ISSN: 0012-821X

hal-00745640
https://hal.archives-ouvertes.fr/hal-00745640
DOI : 10.1016/j.epsl.2011.10.029

Éditeur(s) : HAL CCSD Elsevier Masson
Résumé : Extension fractures of two types defined by the mean stress σ were generated in a synthetic rock analogue material. When σ is very small, the fractures are mode I cracks with smooth surfaces. At higher σ, these surfaces have plumose topography, with the amplitude increasing with σ. Both SEM observations and mechanical measurements show that fractures/discontinuities in the latter case are initiated as dilatancy localization bands. They form under tensile or slightly compressive normal stress and can be seen as running constitutive instabilities. The similarity between the plumose fractography of the experimental fractures and natural joints suggests similarity in the formation mechanism.
ISSN: 1631-0721

hal-00585886
https://hal.archives-ouvertes.fr/hal-00585886
DOI : 10.1016/j.crme.2011.01.002

Éditeur(s) : HAL CCSD Elsevier
Résumé : Deficient sealing in the well cement plugs and annulus due to mechanical fracturing is an important risk of CO2 leakage from the reservoir to others permeable layers and the surface. Such situation was reproduced at laboratory scale in order to determine the hydro-chemical control on the fracture permeability. Specifically, we investigated the effect of CO2 rich-brine flowing through fractured Portland cements at T = 60 °C and P = 10 MPa and variable flow rates. We showed that carbonation process is dominant and induces permeability decrease and leakage mitigation for extremely low flow rate whereas for high flow rate injection the permeability remains constant due to the precipitation of a low density secondary Si-rich phase which maintains the initial fracture aperture. At intermediate flow rate the hydraulic aperture can increase due to the densification of the material triggered by the net precipitation of low porosity calcite. These results emphasize that more complex behaviors than those considered from batch experiments may take place in the vicinity of flowing fractures. Specifically, the redissolution of the neoformed calcite as well as the development of amorphous phases, both controlled by the CO2-rich brine renewing rate in the fracture may prevent the healing fracture.
ISSN: 1750-5836

hal-00857555
https://hal.archives-ouvertes.fr/hal-00857555
DOI : 10.1016/j.ijggc.2013.04.002