Éditeur(s) : INRA : Institut National de la Recherche Agronomique Université des Antilles. Service commun de la documentation
Extrait de : 52e congrès annuel de la Société caribéenne des plantes alimentaires / 52nd annual meeting of the Caribbean food crops society (CFCS), du 10 au 16 juillet 2016. INRA, CFCS
Description : In the Global South, improvement of agricultural outputs is eagerly awaited. While by 2050, its population will double areas devoted to agriculture will decrease exacerbating undernutrition of the poor. Unfortunately, the demand for fresh locally-produced meat products is not satisfied yet in the tropics. So, efficiency in animal productions is essential to allow coverage of protein nutritional needs of people, both in quality and quantity. In the Caribbean territories mixed farming systems are the most common farming systems (about 80%) and can constitute a solution to reach food sovereignty in such limited and isolated spaces. Lessons to be learned from these systems involve improving animal performance while respecting the natural balance with environment and maintaining the multi-functionality of plants and animals. Firstly, the natural (or selected) comfort zone of animal and plants must fit with the farm conditions, insuring thereby animal survival and welfare. Enhancement of adaptation to stresses (biotic, abiotic and socio- economic) in species or animal genotypes is a key element implying their equilibrium with the farm environment. This approach underpins for the farmer an integrated management of animal health, nutrition, genetics, reproduction, in close relationship with other compartments of the farming system. Secondly, animal adaptation may be completed by resilience ability within systems. Animals have to produce although facing stresses. Finally, the animal must be efficient that is to say must reconcile physiological functions of production, reproduction with adaptation functions. This optimization leads to decreased inputs and to overall efficiency of mixed farming systems at the end. The aim of the breeder is to choose the animal producing the best balance between output-reproduction-adaptation, at the individual or the flock scale combining genetic and physiological diversity. The underlying idea is to give to humans and animals their right place in the food chain taking into account the farmers? skills and wills. This idea is included in the agroecological approach and may give guidelines for food sovereignty worldwide.
Siècle(s) traité(s) : 21
Droits : CC-BY-NC-ND - Attribution - Pas d'utilisation commerciale - Pas de modification
Permalien : http://www.manioc.org/fichiers/V16318
V16318

Éditeur(s) : HAL CCSD American Institute of Mathematical Sciences
Résumé : International audience
In this paper, shape optimization tools are applied to coastal engineering. A barred beach protection study is described, using a new type of water wave attenuator device, namely geotextile tube, to reduce the mobilization of sediments. A global optimization algorithm, able to pursue beyond local minima, is used to search for the optimum properties of the geotextile tube. The optimal configuration is then post-validated for generated currents.
ISSN: 1531-3492

hal-00475636
https://hal.archives-ouvertes.fr/hal-00475636
DOI : 10.3934/dcdsb.2010.13.759

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The paper presents coastal structures design in the presence of waves by the minimization of a cost function. It aims to show that shape optimization can be efficiently applied to ocean engineering. This is an underlying guiding principle for the design of harbors or offshore breakwaters. We compute the solution of a specific simplified boundary value problem describing the short wave propagation toward a vertical sea cliff or vertical wall and modify accordingly the shape of defense structures in order to minimize a pre-defined cost function taking into account the strength (energy) of the water waves. The optimization procedure relies on a global semi-deterministic search algorithm able to escape from local minima.
ISSN: 0378-3839

hal-00411905
https://hal.archives-ouvertes.fr/hal-00411905
DOI : 10.1016/j.coastaleng.2007.06.006

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
While vertical motion induced by long-term geological loads is often used to estimate the flexural rigidity of the lithosphere, we intend to evaluate the shear rigidity of the lithosphere using horizontal motion. Our approach considers that the rigidity of the lithosphere may be defined as its resistance to horizontal tectonic lateral forces. In this case, a spatial distribution of an effective shear rigidity can be estimated from the analysis of the interseismic velocity fields. We consider the Western United States zone where weakly strained areas (e.g., the Sierra Nevada) are connected with areas of large strain rate (e.g. San Andreas Fault system). By inverting interseismic strain distribution measured by geodetic methods, we infer the effective shear rigidity of the lithosphere. The forward problem is defined using the equations of linear elasticity. The inversion relies on the minimization of the sum of a quadratic measure of the differences between measured and modelled velocity fields. The functional also includes regularization terms for the parameters of the model. The gradient of the functional with respect to the minimization parameters is computed using an adjoint formulation. This permits the treatment of large dimensional minimization problems. Finally, a measure of the uncertainty of our inversion is illustrated through the covariance matrix of the parameters at the optimum. The optimization chart is validated on two synthetic velocity distributions. Then, the effective shear rigidity variations of the Western United States are estimated using the CMM3 interseismic velocities. The inversion displays low effective rigidities along the San Andreas Fault system, the Mojave Desert and in the Eastern California Shear Zone, while rigid areas are found in the Sierra Nevada and in the South Basin and Range. Finally, we discuss the differences between our strain rate and rigidity maps with previously published results for the Western United States.
ISSN: 0040-1951

Droits : http://hal.archives-ouvertes.fr/licences/copyright/
hal-01505024
https://hal.archives-ouvertes.fr/hal-01505024
https://hal.archives-ouvertes.fr/hal-01505024/document
https://hal.archives-ouvertes.fr/hal-01505024/file/Paper_tectophysics.pdf
DOI : 10.1016/j.tecto.2017.03.015

Éditeur(s) : HAL CCSD Springer Verlag (Germany)
Résumé : International audience
Surface displacements due to temporal changes in environmental mass redistributions are observable in the coordinate time series of many Global Navigation Satellite System (GNSS) sites. In this study, we investigated the effect of loading on estimates of tectonic velocity computed from campaign-style GNSS observations. The study region is in the Pyrenees mountain range between France and Spain (ResPyr campaigns). In this area, seismic activity is continuous and moderate and the expected amplitude of the horizontal tectonic velocity is less than 0.5 mm/yr. In order to determine the velocity, 4 sparse GNSS campaigns were carried out from 1995 to 2010. Considering this small rate of deformation, loading phenomena can contribute a non-negligible artifact to the velocity computation that could affect our geodynamical interpretation. In this investigation, we specifically considered the atmospheric, hydrological, and non-tidal ocean loading phenomena. The computed loading deformations for this region show the horizontal displacements are dominated by the non-tidal ocean loading (maximum 4 mm for the North and 3.1 mm for the East components); the main vertical contributions are due to the atmospheric and continental water storage loading (maximum 14.3 for the atmosphere and 8.1 mm for the hydrology, respectively). We have found that the dominant loading effect on the horizontal velocity is the non-tidal ocean loading (mean of 0.11 mm/yr), whereas the vertical component is dominated by the hydrological loading (mean of 0.21 mm/yr). Since the study area is in a mountainous region, we also analyzed the difference between the atmospheric and the topography dependent atmospheric loading models at our GNSS campaign sites. We did not find any significant difference between the two atmospheric loading models in terms of horizontal velocity. Finally, we performed simulations to identify the optimum timing and frequency of future GNSS campaigns in this area that would minimize the loading effects on tectonic velocity estimates.
ISSN: 0039-3169

hal-00963629
https://hal.archives-ouvertes.fr/hal-00963629
DOI : 10.1007/s11200-012-0458-2

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
In this work we perform a statistical analysis of global solar radiation measured at two sites, 38 km distant from, in Guadeloupe, French West Indies. We have established a correlation model based on the coefficient of variation assuming a time scale separation. The coefficient of variation is calculated on minutes interval with data measured at 1 Hz. This analysis highlight the dynamic correlation that can occur between measurements from two different sites with a time step of one second. From this results, knowing the coefficient of variation on a site we have established a new correlation model on this parameter for another site. A diagram linking the standard deviation on both sites, for a given coefficient of variation is proposed for correlated and non-correlated cases. More over this analysis put in evidence the existence of a threshold time under which there is no significant correlation. This model can be useful in choosing new sites of production not only for establishing correlation from on site to another, but also in optimizing the geographical distribution of the solar farms within the territory.
ISSN: 0960-1481

Droits : http://hal.archives-ouvertes.fr/licences/copyright/
hal-01099045
https://hal.archives-ouvertes.fr/hal-01099045
https://hal.archives-ouvertes.fr/hal-01099045/document
https://hal.archives-ouvertes.fr/hal-01099045/file/Article%20Foison_2014.pdf

Éditeur(s) : HAL CCSD Wiley
Résumé : International audience
Benthic microbial fuel cells (BMFCs) are continuous electricity generators using electroactive microorganisms and organic matter from aquatic environment, respectively, as catalysts and substrate. In this paper, first a low-cost PVC-made structure is constructed to harvest electricity from mangrove environment located in French Guiana. An in situ BMFC has given power density of 30 mW/m2 of the anodic surface area. This performance has been confirmed by experience in laboratory where inter-electrode distance and electrode surface area appeared to be power increasing factors. However, the output power of one BMFC is not used to supply real devices such as autonomous sensors. Second, to meet this expectation, in parallel and in series associations were considered. These associations were made in order to increase the output voltage and consequently the power, to reach levels that can supply small sensors (about 3 V). Finally, to improve the performance of the series association and to avoid the voltage reversal phenomenon, a voltage balancing circuit was simulated and added to the series connections. With balancing method, the cell voltage of BMFCs can be equalized, and the performances can be improved. This allows an optimal energy harvesting and a better global efficiency of the set.
ISSN: 0363-907X

hal-01683128
https://hal.univ-antilles.fr/hal-01683128
DOI : 10.1002/er.3270

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
The reactivation of faults with near-optimal orientations is commonly considered to control the state of stress in the crust. Near the surface, where a principal stress direction is vertical, the attitude of such faults is explained by Anderson's theory. This raises the questions of how prevalent this type of faulting actually is in current seismicity, down to what depth it frequently occurs, and what range of friction angles explains it best. The Global Centroid Moment Tensor catalog is analyzed to address these questions. Dip-slip and strike-slip mechanisms are dominant, and oblique slips are relatively rare for well-constrained events with depths shallower than 30 km. Preferred Andersonian faulting is the simplest, but not the unique, explanation for this dominance. Isolating reverse, strike- slip, and normal events reveals an asymmetry in the distribution of nodal plane dips and plunges of the P, B, and T axes between reverse and normal faulting. Assuming that the most frequent events correspond to reactivation near optimal orientations yields 40-60 degrees and 0-20 degrees friction angles for reverse and normal faults, respectively. This indicates that reverse and normal faulting mechanics are not symmetrical with respect to stress configuration as predicted by Anderson's theory.
ISSN: 8755-1209

hal-00412159
https://hal.archives-ouvertes.fr/hal-00412159
DOI : 10.1029/2007RG000240

Éditeur(s) : Pergamon-elsevier Science Ltd
Résumé : A complete and optimized scheme of lettered marine isotope substages spanning the last 1.0 million years is proposed. Lettered substages for Marine Isotope Stage (MIS) 5 were explicitly defined by Shackleton (1969), but analogous substages before or after MIS 5 have not been coherently defined. Short-term discrete events in the isotopic record were defined in the 1980s and given decimal-style numbers, rather than letters, but unlike substages they were neither intended nor suited to identify contiguous intervals of time. Substages for time outside MIS 5 have been lettered, or in some cases numbered, piecemeal and with conflicting designations. We therefore propose a system of lettered substages that is complete, without missing substages, and optimized to match previous published usage to the maximum extent possible. Our goal is to provide order and unity to a taxonomy and nomenclature that has developed ad hoc and somewhat chaotically over the decades. Our system is defined relative to the LR04 stack of marine benthic oxygen isotope records, and thus it is grounded in a continuous record responsive largely to changes in ice volume that are inherently global. This system is intended specifically for marine oxygen isotope stages, but it has relevance also for oxygen isotope stages recognized in time-series of non-marine oxygen isotope data, and more generally for climatic stages, which are recognized in time-series of non-isotopic as well as isotopic data. The terms “stage” and “substage” in this context are best considered to represent climatostratigraphic units, and thus “climatic stages” and “climatic substages”, because they are recognized from geochemical and sedimentary responses to climate change that may not have been synchronous at global scale.
Quaternary Science Reviews (0277-3791) (Pergamon-elsevier Science Ltd), 2015-03 , Vol. 111 , P. 94-106

Droits : 2015 Elsevier Ltd. All rights reserved.
http://archimer.ifremer.fr/doc/00251/36216/35796.pdf
DOI:10.1016/j.quascirev.2015.01.012
http://archimer.ifremer.fr/doc/00251/36216/

Éditeur(s) : HAL CCSD Wiley
Résumé : International audience
AimBiological invasions are major contributors to global change and native biodiversity decline. However, they are overlooked in marine conservation plans. Here, we examine for the first time the extent to which marine conservation planning research has addressed (or ignored) biological invasions. Furthermore, we explore the change of spatial priorities in conservation plans when different approaches are used to incorporate the presence and impacts of invasive species.LocationGlobal analysis with a focus on the Mediterranean Sea region.MethodsWe conducted a systematic literature review consisting of three steps: (1) article selection using a search engine, (2) abstract screening and (3) review of pertinent articles, which were identified in the second step. The information extracted included the scale and geographical location of each case study as well as the approach followed regarding invasive species. We also applied the software Marxan to produce and compare conservation plans for the Mediterranean Sea that either protect, or avoid areas impacted by invasives, or ignore the issue. One case study focused on the protection of critical habitats, and the other on endemic fish species.ResultsWe found that of 119 papers on marine spatial plans in specific biogeographic regions, only three (2.5%) explicitly took into account invasive species. When comparing the different conservation plans for each case study, we found that the majority of selected sites for protection (ca. 80%) changed in the critical habitat case study, while this proportion was lower but substantial (27%) in the endemic fish species case study.Main conclusionsBiological invasions are being widely disregarded when planning for conservation in the marine environment across local to global scales. More explicit consideration of biological invasions can significantly alter spatial conservation priorities. Future conservation plans should explicitly account for biological invasions to optimize the selection of marine protected areas.
ISSN: 1366-9516

hal-01431351
https://hal-univ-perp.archives-ouvertes.fr/hal-01431351
DOI : 10.1111/ddi.12491

Éditeur(s) : Université des Antilles et de la Guyane
Résumé : The need for an integrated approach to fisheries is now widely affirmed, including the FAO, in particular in the context of tropical artisanal fisheries. These small-scale fisheries, often multispecies are very important in terms of production, employment and food security. However these fisheries and the exploited resources are often characterized by a lack of data making difficult their management within an ecosystem approach, and by the ecological and economic system complexities including trophic and technological interactions. This thesis aims to contribute to the development of bioeconomic tools for small tropical fisheries in a sustainable management perspective based on the ecosystem approach. In this perspective, the French Guiana coastal fishery constitutes an interesting case study. The thesis proposes multi-criteria evaluations, complex bioeconomic models and viable management scenarios for this fishery. At first, multivariate statistical analysis suggests a satisfactory overall status of the fishery in terms of sustainability. However, some performance differences are noted within the fishery, particularly at border areas. Also, management improvements are proposed. Then, through bioeconomic modeling, projections of different fishing scenarios show that, in the long-term, the current exploitation level may not be consistent with the future increase of local demand and a loss of biodiversity may occur. A scenario called "co-viability" reconciling ecological, economic and social objectives, with a high probability of achievement is exhibited. Finally, the comparison of optimal behavior in cooperative and non-cooperative conditions, confirms that harvest levels are greater when actors do not cooperate. Furthermore, it is shown that the state of the ecosystem depends on the fishing strategies and the type of interaction between species. Beyond the diagnosis made for the case study, the method is promising in the context of small tropical fisheries, while the co-viability approach allows finding the exploitation conditions under which ecological and socio-economic sustainability are meet, what the conventional fisheries management generally do not allow.
La nécessité d’une approche intégrée des pêches est actuellement largement affirmée, notamment par la FAO, en particulier dans le contexte des pêcheries artisanales tropicales. Ces pêcheries à petites échelles, souvent multi-spécifiques sont très importantes en termes d’emploi et de production, y compris pour la sécurité alimentaire. Néanmoins ces pêcheries et la biodiversité exploitées sont souvent marquées, d’une part, par le manque de données rendant difficile leur gestion dans le cadre d’une approche écosystémique, d’autre part, par la complexité des systèmes écologiques et économiques sous-jacents incluant interactions trophiques et techniques. Cette thèse contribue à la mise au point d’outils bioéconomiques adaptés aux petites pêcheries tropicales dans la perspective d’une gestion durable des pêches fondée sur l’approche écosystémique. Dans cette perspective, la pêcherie côtière en Guyane Française constitue un cas d’étude particulièrement fécond. La thèse propose ainsi des évaluations multi-critères, des modèles bioéconomiques complexes et des scénarios de gestion viable pour cette pêcherie. Dans un premier temps l’analyse statistique multivariée suggère un statut global satisfaisant de la pêcherie en termes de durabilité. Cependant des différences de performance sont notées au sein de la pêcherie, notamment au niveau des zones frontalières. Aussi des améliorations dans le mode de gestion sont proposées. Ensuite, à travers la modélisation bioéconomique, les projections des différents scénarios de pêche montrent qu’à long terme le niveau d’exploitation actuel peut ne pas être en adéquation avec la future augmentation de la demande locale et qu’une perte de biodiversité peut avoir lieu. Un scenario dit de "co-viabilité" conciliant des objectifs à la fois écologique, économique et social, avec une probabilité de réalisation satisfaisante, est mis en exergue. Enfin, la comparaison des comportements optimaux en situation coopératif et non coopératif, montre dans quelle mesure la viabilité est favorisée quand les acteurs coopèrent. Au-delà du diagnostic apporté pour le cas d’étude, la méthode utilisée s’avère prometteuse dans le contexte des petites pêcheries tropicales, tandis que l’approche de co-viabilité permet de trouver les modalités d’exploitation dans le cadre de compromis entre durabilité écologique et socio-économique, ce que les principes de gestion halieutiques traditionnels ne permettent généralement pas.

Droits : 2013 Université des Antilles et de la Guyane
http://archimer.ifremer.fr/doc/00144/25492/23646.pdf
http://archimer.ifremer.fr/doc/00144/25492/

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Voting rules relying on k-nearest neighbors (k-NN) are an effective tool in countless many machine learning techniques. Thanks to its simplicity, k-NN classification is very attractive to practitioners, as it enables very good performances in several practical applications. However, it suffers from various drawbacks, like sensitivity to "noisy" instances and poor generalization properties when dealing with sparse high-dimensional data. In this paper, we tackle the k-NN classification problem at its core by providing a novel k-NN boosting approach. Namely, we propose a supervised learning algorithm, called Universal Nearest Neighbors (UNN), that induces a leveraged k-NN rule by globally minimizing a surrogate risk upper bounding the empirical misclassification rate over training data. Interestingly, this surrogate risk can be arbitrary chosen from a class of Bregman loss functions, including the familiar exponential, logistic and squared losses. Furthermore, we show that UNN allows to efficiently filter a dataset of instances by keeping only a small fraction of data. Experimental results on the synthetic Ripley's dataset show that such a filtering strategy is able to reject "noisy" examples, and yields a classification error close to the optimal Bayes error. Experiments on standard UCI datasets show significant improvements over the current state of the art.
ISSN: 0925-2312

hal-00664462
https://hal.inria.fr/hal-00664462

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
This paper describes an operational protocol for integrating conservation and restoration with land-use planning in islands. Conservation challenges are intensified in insular systems due to higher ecosystem vulnerability, limited spatial options, low data availability, rapid land-use change and, globally, short-term vision planning. Our operational planning protocol integrates ecological and socio-economic factors to identify the best spatial options for conserving and restoring biodiversity, inside and outside extant reserves, while minimising future land-use conflicts. Conservation and restoration targets are formulated for species, habitats and ecological processes that support biodiversity. An optimal network of priority sites is selected to achieve those targets across the landscape. The prioritisation process integrates a Conservation Costs Index to optimise conservation and restoration investments. We discuss the outcomes of the planning protocol in terms of site prioritisation, stakeholders' participation and general implications for spatial planning in insular systems. As with many islands, the study area of Réunion Island has experienced rapid urban and agricultural expansion, which threatens its unique biodiversity. Forty three per cent of the island is currently protected in a National Park but only half of this reserve network contributes to the achievement of targets. An additional 21% of land should be conserved mainly to ensure the persistence of ecological connections between the marine, terrestrial and freshwater realms. Finally we emphasize that our method doesn't substitute the land-use planning debate but is aimed to better prepare the conservation sector for negotiating future land-use allocation with other socio-economic sectors in islands
Landscape and Urban Planning

halsde-00676425
https://hal.archives-ouvertes.fr/halsde-00676425
DOI : 10.1016/j.landurbplan.2011.02.004

Éditeur(s) : HAL CCSD
Résumé : International audience
The Cenozoic weathering of peninsular India has been advocated as a major driver of globalcooling, however, its timing remains virtually unconstrained such that proposed links betweentropical weathering of the Deccan Traps, regional monsoonal intensity and global climate remainsspeculative. To solve this conundrum we present here a revised weathering chronologybased on the identification of lateritic paleosurfaces and their dating using 40Ar/39Ar on supergeneK-rich manganese oxides. We focus on the Indian western passive margin where theWestern Ghats Escarpment (WGE) – a ~1000 m high topographic barrier resulting from thecontinental break up of Greater India – exposes exceptionally preserved weathering profilesfrom the western coastal lowlands to the eastern highland plateaus above the WGE. Four mainlateritic paleosurfaces have been identified: Three in the highland; a high landsurface (Al-Femostly bauxite) at elevation 1200-1000 m asl, an intermediate landsurface covered by a Feduricrustat 1000-900 m asl and a lower pediment landsurface at 850-600 m asl; and one inthe coastal lowland underneath a pediment landsurface at 150-50 m asl. The 40Ar/39Ar agesdocument three major weathering periods over the Cenozoic. The oldest weathering period(W1) is recorded between 53 Ma to 45 Ma both in the highland and the lowland. This correlatesto the Global Eocene climatic Optimum, and allows defining a bauxitic paleolandsurface acrossthe escarpment. Intense bauxitic weathering between ~ 45 and 47 Ma in the lowland indicatethat the WGE was stabilized before ~ 47 Ma on its margin and also implies low denudation rateat the foot of the WGE (<5 m Ma-1) since that time. The second weathering period between37 Ma to 19 Ma (W2) occurred in two distinctive stages (W2a and W2b). From 37 to 26 (W2a),weathering is only recorded in the highland and affect intermediate surfaces. The intensityof chemical weathering decreased sensibly between 32 and 29 Ma – potentially linked to theEarly Oligocene cooling – and resulted in the formation of the lower pediment surface. From~26 Ma to 19 Ma (W2b), only the western coastal lowland weathered while the highland surfacesare mostly dissected. This change and the highland/lowland weathering mitigation after~26 Ma documents a change in climatic patterns over peninsular India that signs the onset ofmodern-like monsoon regime. These results are being interpolated to the Deccan Traps basaltsto quantify their weathering and ultimately estimate of the contribution to CO2 fluxes of thesethree weathering periods and their potential link to Asian Monsoons and global cooling.
Source to Sink: a long term perspective of sediment budgets and sources characterization, Abstracts
Rennes, France

insu-01406455
https://hal-insu.archives-ouvertes.fr/insu-01406455

Éditeur(s) : HAL CCSD European Geosciences Union
Résumé : International audience
The exchanges of carbon, water and energy between the atmosphere and the Amazon basin have global implications for the current and future climate. Here, the global atmospheric inversion system of the Monitoring of Atmospheric Composition and Climate (MACC) service is used to study the seasonal and interannual variations of biogenic CO 2 fluxes in Amazonia during the period 2002–2010. The system assimilated surface measurements of atmospheric CO 2 mole fractions made at more than 100 sites over the globe into an atmospheric transport model. The present study adds measurements from four surface stations located in tropical South America, a region poorly covered by CO 2 observations. The estimates of net ecosystem exchange (NEE) optimized by the inversion are compared to an independent estimate of NEE upscaled from eddy-covariance flux measurements in Amazonia. They are also qualitatively evaluated against reports on the seasonal and interannual variations of the land sink in South America from the scientific literature. We attempt at assessing the impact on NEE of the strong droughts in 2005 and 2010 (due to severe and longer-than-usual dry seasons) and the extreme rainfall conditions registered in 2009. The spatial variations of the seasonal and in-terannual variability of optimized NEE are also investigated. While the inversion supports the assumption of strong spatial heterogeneity of these variations, the results reveal critical limitations of the coarse-resolution transport model, the surface observation network in South America during the recent years and the present knowledge of modelling uncertainties in South America that prevent our inversion from capturing the seasonal patterns of fluxes across Amazonia. However, some patterns from the inversion seem consistent with the anomaly of moisture conditions in 2009.
ISSN: 1680-7316

hal-01557375
https://hal.univ-lorraine.fr/hal-01557375
https://hal.univ-lorraine.fr/hal-01557375/document
https://hal.univ-lorraine.fr/hal-01557375/file/acp-15-8423-2015.pdf
DOI : 10.5194/acp-15-8423-2015-supplement

Éditeur(s) : HAL CCSD
Résumé : International audience
Optimizing the resource extraction and limiting the environmental constraint motivate to accurately characterize reservoirs. The extraction of resources induces volume change of the reservoir causing displacements in the surrounding medium up to the surface. The resulting surface deformation is usually significant enough to be measurable by geodetic instruments (GPS, satellites, tiltmeters, strainmeters). However, the data needs to be associated to a reservoir model using an inverse scheme to allow the estimation of physical properties of the reservoir. Complete geodetic data including InSAR, GPS, tilt, strain and gravimetric data are uncommon for conventional, unconventional or mining exploitations. In this study, we work on the one site that gathers a wide range of geodetic data: the salt exploitation of Vauvert, France, operated by KemOne. Our approach aims at estimating the volume changes of the cavities created by the extraction combining all the available geodetic data. To do so, we minimize a global functional including weighting factors for each data type. The weighting factors are optimally estimated for our study and can be adapted depending on the issue. Hence, an optimal distribution of data can be suggested for a specific reservoir characterization.
79th EAGE Conference
Paris, France

Droits : http://hal.archives-ouvertes.fr/licences/copyright/
hal-01575426
https://hal.archives-ouvertes.fr/hal-01575426
https://hal.archives-ouvertes.fr/hal-01575426/document
https://hal.archives-ouvertes.fr/hal-01575426/file/reservoir-characterization-inversion.pdf
DOI : 10.3997/2214-4609.201700987

Éditeur(s) : HAL CCSD Wiley
Résumé : International audience
This paper describes how to tackle new challenging coastal engineering problems related to beach erosion with a shape optimization approach. The method modifies the shape of the sea bottom in order to reduce beach erosion effects. Global optimization is shown to be necessary as the related functionals have several local minima. We describe the physical model used, the proposed protection devices against beach erosion and real case applications.
ISSN: 0029-5981

hal-00411912
https://hal.archives-ouvertes.fr/hal-00411912
DOI : 10.1002/nme.2209

Éditeur(s) : HAL CCSD
Résumé : The presence of biological matter (biofilms) in deep geological sites for storage of, for instance, toxic elements or groundwater in aquifers was clearly proved. That biomass triggers physical and chemical processes which greatly modify the durability and the sustainability of the sites. These processes, mainly from oxidative/reductive reactions, are poorly understood. This is mainly due to the fact that former studies were done at the macroscopic level far away from the micrometric scale where relevant processes induced by bacteria take place. Investigations at microscopic level are needed. Thus, we developed an experimental set-up based on the combined use of optical microscopy (transmission), atomic force microscopy (AFM) and electrical and electro-chemical AFM microscopy (EC_AFM) in order to get simultaneous information on topographic and electro-chemical processes. The first highly sensitive step was to use AFM with biological samples in liquid environment: wepresent here a study about AFM imaging of living, moving or self-immobilized bacteria, in their genuine physiological liquid medium and in true in vivo conditions. No external immobilization protocol, neither chemical nor mechanical was needed. For the first time, the native gliding movements of Gram negative Nostoc cyanobacteria upon the surface were studied by AFM. AFM height and mechanical stiffness data were simultaneously acquired. From these, mechanical parameters, inner turgor pressure and Young modulus, were derived for different bacterial species (Anabaenopsis circularis, Rhodococcus wratislaviensis). Our study revealed that AFM imaging is thus possible on moving living species. These results open a large window on new studies of both dynamical phenomena of practical and fundamental interests such as the formation of biofilms and dynamic properties of bacteria in real physiological conditions. The second delicate step was to combine AFM and optical measurements with electrical ones. We mounted a new experimental set-up coupling real-time (i) monitoring of optical properties as the optical density (OD) evolution related to bulk bacterial growth in liquid or as the counting of number of bacteria adhering on the surface of the sample as well and (ii) electrical and electrochemical measurements. Furthermore, these results will shortly be applied to the optimized monitoring of the in-situ activity of bacteria consuming oil pollutants, following this way, in real-time, the bioremediation of an oilcontaminated soil (ANR ECOTECH_BIOPHY program).
La présence de matière biologique (biofilms) dans les sites de stockage géologique profond, d'éléments toxiques ou encore de l'eau potable des aquifères est maintenant clairement démontrée. Cette biomasse est à l'origine de processus physiques et chimiques qui modifient considérablement la durabilité et la pérennité des sites concernés. Ces processus, principalement de type oxydo-réductif, sont encore mal compris. Ceci est principalement dû aux méthodes d'investigation, principalement macroscopiques, loin de l'échelle micrométrique caractéristique des bactéries. Seules des études, basées sur des méthodes d'investigation locale, peuvent apporter les informations requises. Ainsi, nous avons développé un dispositif expérimental basé sur l'utilisation combinée de la microscopie optique (en transmission), la microscopie à force atomique (AFM) et la microscopie AFM en mode électrique et électrochimique (EC_AFM) afin d'obtenir des informations simultanées sur la topographie de l'échantillon et sur les processus électrochimiques à l'échelle des bactéries. La première étape sensible consistait à utiliser l'AFM sur des échantillons biologiques en milieu liquide: nous présentons ici les résultats de l'imagerie AFM en milieu liquide de plusieurs types de bactéries dans leurs conditions physiologiques naturelles (conditions in vivo). Aucun protocole d'immobilisation, ni chimique ni mécanique, n'a été nécessaire; et pour la première fois, les mouvements de reptation de cyanobactéries Nostoc ont été étudiés par l'AFM. Les études AFM ont permis d'acquérir des données topographiques mais aussi mécaniques : nous avons pu ainsi mesurer le module d'Young, la pression de turgescence de différentes souches bactériennes (Anabaenopsis circularis, Rhodococcus wratislaviensis). Cette étude complète, a révélé que l'imagerie AFM est donc possible sur des espèces vivantes en mouvement. Ces résultats ouvrent une grande fenêtre sur de nouvelles études d'intérêts tels que la formation de biofilms et les propriétés dynamiques de bactéries dans des conditions physiologiques réelles. La deuxième étape délicate était de combiner l'AFM aux mesures optiques et électriques. Nous avons développé un nouveau dispositif expérimental permettant (i) le suivi de l'évolution de la croissance bactérienne par la mesure des propriétés optiques comme la densité optique DO (pour le développement bactérien en volume - milieu planctonique) , ou l'analyse de l'image du substrat par comptage du nombre de bactéries sur la surface de l'échantillon (biofilm), et (ii) les mesures électriques et électrochimiques. L'ensemble de ces résultats sera prochainement appliqué au développement de nouveaux outils de surveillance d'une biodépollution de terrain contaminé par les hydrocarbures, par le suivi in situ et en temps réel de l'activité de bactéries dépolluantes (ECOTECH_BIOPHY ANR).
https://tel.archives-ouvertes.fr/tel-01044714

tel-01044714
https://tel.archives-ouvertes.fr/tel-01044714
https://tel.archives-ouvertes.fr/tel-01044714/document
https://tel.archives-ouvertes.fr/tel-01044714/file/theseDhahri2013.pdf

Éditeur(s) : HAL CCSD Elsevier
Résumé : We present the hierarchical matrix (H-matrix) technique combined with the adaptive cross-approximation (ACA) applied to a three-dimensional (3D) elastostatic problem using the boundary element method (BEM). This is used in structural geology and geomechanics for the evaluation of the deformation and perturbed stress field associated with surfaces of displacement discontinuity. Such optimization significantly reduces (i) the time and memory needed for the resolution of the system of equations, but more importantly (ii) the time needed for the post-processing at observation points where the deformation and the perturbed stress field are evaluated. Specifically, it is shown that the H-matrix structure used with the ACA, clearly captures the kernel smoothness during the post-processing stage according to the field point positions, and optimizes the computation accordingly. Combined with the parallelization on multi-core processors, this technique allows intensive computations to be done on personal desktop and laptop computers. Numerical simulations are presented, showing the advantages of such optimizations compared to the standard method.
ISSN: 0955-7997

hal-00561032
https://hal.archives-ouvertes.fr/hal-00561032
DOI : 10.1016/j.enganabound.2009.10.016

Éditeur(s) : HAL CCSD
Résumé : International audience
We consider a second-order differential system with Hessian-driven damping . An interesting property of this system is that, after introduction of an auxiliary variable y , it can be equivalently written as a first-order system in time and space. This allows us to extend the analysis to the case of a convex lower semicontinuous potential and so to introduce constraints in the model. When considering the indicator function of a closed convex set, the subdifferential operator takes account of the contact forces. In this setting, by playing with the geometrical damping parameter, we can describe nonelastic shock laws with restitution coefficient. Taking advantage of the infinite dimensional framework, we introduce a nonlinear hyperbolic PDE describing a damped oscillating system with obstacle. The system is dissipative; in the convex case each trajectory weakly converges to a minimizer of the global potential energy function. Exponential stabilization is obtained under strong convexity assumptions.
Differential Equations & Applications

hal-00803214
https://hal.archives-ouvertes.fr/hal-00803214
https://hal.archives-ouvertes.fr/hal-00803214/document
https://hal.archives-ouvertes.fr/hal-00803214/file/Attouch-Mainge-Redont-30August2011.pdf