Éditeur(s) : HAL CCSD
Résumé : East African Rift (EAR) is the divergent plate boundary. EAR exposes different stages of extension, from early stage rifting in Tanzania to oceanic accretion in Afar (Ethiopia). Manyara basin is the southernmost rift system of the east branch of EAR with recent volcanism (< 1.5 Ma) and a seismic swarm in the lower crust (20 – 40 km). Due to its location and tectonic setting, the Manyara basin offers the opportunity to study the earliest stage of rift initiation. Manyara volcanism is composed of several types of hyper-alkaline lavas as Mg-nephelinites (Mg# > 55) (Labait, Kwaraha), calciocarbonatite (Kwaraha) and evolved nephelinites (Mg# < 35) (Hanang).Mg-nephelinites (Labait and Kwaraha) are primary lavas mainly composed of olivine and clinopyroxene (cpx). Geochemical modelling from trace elements suggests that these primary magmas result from a degree of partial melting < 1 % from a CO2-garnet-phlogopite-bearing peridotite. These magmas have an asthenospheric source at depth > 120 km (lava carries xenoliths with equilibrium conditions > 4 GPa). The minerals were crystallized from a magma with a low H2O content (0.1 and 0.5 wt% H2O). The calciocarbonatite and evolved nephelinites are derived from Mg-nephelinites by fractional crystallization and immiscibility processes. Hanang nephelinites are silica- and alkaline-rich lavas (44.2 – 46.7 wt % SiO2, 9.5 –12.1 wt % Na2O+K2O, respectively) composed by cpx, Ti-garnet, nepheline, apatite and titanite. Complex zonation of cpx (e.g. abrupt change of Mg#, Nb/Ta, and H2O) and trace element patterns of nephelinites record magmatic differentiation involving open system with carbonate-silicate immiscibility and primary melt replenishment. The low H2O content of cpx (3 – 25 ppm wt. H2O) indicates that at least 0.3 wt % H2O was present at depth during carbonate-rich nephelinite crystallization at 340 – 640 MPa and 1050 – 1100 °C. The study of hosted-nepheline melt inclusions from Hanang allows constraining the late magmatic evolution of nephelinites during storage and magma ascent. Melt inclusions are composed by a silicate trachytic glass, a carbonate phase and a shrinkage bubble. Trachytic glass contains high content in CO2 (0.43 wt %, SIMS analyses), sulfur (0.21 – 0.92 wt % S), chlorine (0.28 –0.84 wt % Cl) and H2O low content (< 0.1 wt %, Raman analyses). Immiscibility process leading to the formation of carbonate occurs in a closed system during rapid magma ascent between 200 – 500 MPa. The carbonate phase is a Ca-Na-K-S-rich and anhydrous carbonate (33 wt % CaO, 20 wt % Na2O, 3 wt % K2O, and 3 wt % S). The pre-immiscible liquid has a phonolitic composition with 6 ± 1.5 wt % CO2 at 700 MPa. A preliminary study of melt inclusions by XANES spectroscopy and whole rocks by Mössbauer spectroscopy was used to determine these Manyara lavas were formed at oxidizing conditions (~ ΔFMQ +1.5).The early stage rifting volcanism (Manyara Basin) is characterized by CO2-rich and H2O-poor magmas from at least 120 km below the rift escarpment. The presence of CO2-rich magmas and the small amount of volcanic rocks erupted at the surface may indicate that the storage and percolation of these magmas at depth is a potential trigger for deep seismic swarms.
Le rift Est africain (REA) est une frontière de plaque en extension. Ce rift présente plusieurs stades d’extension, de l’initiation du rift en Tanzanie jusqu’à l’accrétion océanique en Afar. Le bassin de Manyara se situe le plus au sud de branche Est du REA. Il est caractérisé par la présence de volcanisme récent (< 1,5 Ma) et d’un essaim sismique dans la croûte inférieure (20 – 40 km). De par sa localisation et son contexte tectonique, le bassin de Manyara offre l’opportunité d’étudier le stade le plus précoce de l’initiation du rift. Le bassin de Manyara est composé de plusieurs types de laves hyperalcalines, les néphélinites magnésiennes (Mg# > 55) (Labait, Kwaraha), de calciocarbonatite (Kwaraha) et des néphélinites différenciées (Mg# < 35) (Hanang).Les néphélinites magnésiennes (Labait et Kwaraha) sont des laves primaires composées d’olivines et de clinopyroxènes (cpx). La modélisation géochimique des éléments en trace suggère que ces magmas primaires résultent d'un degré de fusion partielle ≤ 1 % à partir d'une péridotite à grenat et phlogopite. Ces magmas proviennent d’une profondeur > 120 km (présence de xénolites avec des conditions d’équilibre > 4 GPa). Les minéraux ont cristallisés à partir d’un magma pauvre en eau (0,1 et 0,5 pds % H2O). La calciocarbonatite et les néphélinites différenciés sont issues des néphélinites magnésiennes par cristallisation fractionnée et processus d’immiscibilité. Les néphélinites du Hanang sont riches en éléments alcalins (9,5 – 12,1 pds % Na2O+K2O) et en silice (44,2 – 46,7 pds% SiO2) et sont composés de cpx, grenat, néphéline, titanite et apatite. La zonation complexe dans les cpx (par exemple, changement brusque de Mg#, Nb/Ta, et H2O) implique une différenciation magmatique en système ouvert avec immiscibilité de liquide carbonaté et silicaté ainsi qu’un remplissage de la chambre magmatique avec des liquides primaires. La faible teneur en eau des cpx (3 – 25 ppm H2O) indique la présence d’un magma pauvre en eau (0,3 pds % H2O) lors de la cristallisation des cpx à des conditions crustales (340 – 640 MPa et 1050 – 1100 °C). L’étude des inclusions vitreuses dans les néphélines de Hanang permet de contraindre l'évolution magmatique tardive des néphélinites et le comportement des éléments volatils (CO2, H2O, S, F, Cl) lors du stockage et de la remontée du magma. Les inclusions vitreuses sont composées d’un verre trachytique, d’une phase carbonatée et d’une bulle de rétraction. Le verre trachytique contient du CO2 (0,43 pds % CO2, analyses SIMS), du soufre (0,21 à 0,92 pds% S), du chlore (0,28 – 0,84 pds % Cl) et très peu d’H2O (< 0,1 pds % H2O, analyses Raman). Le processus d’immiscibilité conduisant à la formation du carbonate se produit dans un système fermé pendant l'ascension rapide du magma, entre 200 – 500 MPa. La phase carbonatée est un carbonate anhydre et riche en Ca-Na-K-S (33 pds % CaO, 20 pds % Na2O, 3 pds % K2O, et 3 pds % S). Le liquide pré-immiscible a une composition phonolitique avec 6 ± 1,5 pds % CO2 à une pression de 700 MPa. Une étude préliminaire des inclusions par spectroscopie XANES et des roches par spectroscopie Mössbauer a permis de déterminer que les laves de Manyara se sont formées à conditions oxydantes (~ ∆FMQ +1,5).À l’initiation du rift, le volcanisme dans le bassin de Manyara est caractérisé par des magmas riches en CO2 et pauvres en H2O issus d’au moins 120 km de profondeur sous l'escarpement du rift. La présence de ces magmas riches en CO2 et la faible quantité de roches volcaniques émises à la surface peuvent indiquer que le piégeage et la percolation de ces magmas en profondeur est un déclencheur potentiel des essaims sismiques profonds.
https://tel.archives-ouvertes.fr/tel-01563231

NNT : 2016MONTT114
tel-01563231
https://tel.archives-ouvertes.fr/tel-01563231
https://tel.archives-ouvertes.fr/tel-01563231v2/document
https://tel.archives-ouvertes.fr/tel-01563231/file/2016_BAUDOUIN_archivage.pdf

Éditeur(s) : HAL CCSD Elsevier
Résumé : In this study, I examine the strain modes of the forearc, arc and back-arc domains in arc-continent collisional settings leading to arc material subduction, delamination and/or accretion. The study focusses on two well-documented colliding island arcs: the Izu–Bonin–Mariana (IBM) arc in Japan and the Luzon arc in Taiwan, both carried by the Philippine Sea plate. Firstly, there is a body of evidence that both the IBM and the Luzon arcs were built on the same Late Jurassic to Early Cretaceous “proto-Philippine Sea Plate” crust. Their internal structure is thus more heterogeneous than expected from Paleogene or Neogene supposedly “intra-oceanic” island arcs. Secondly, those arc systems and proximal “back-arcs” have similar seismic characteristics attesting either for the presence of a middle crust with continental velocities and/or serpentinized uppermost mantle that facilitate crustal shortening/slivering and subsequent decoupling from the rest of the subducting plate. It is shown that the proximal back-arc domain (called “rear-arc” in case of paleoarc activity), overlying the mantle wedge and the subducting slab, may lose its strength if slab-derived hydration occur. Decoupling then occurs below the Moho. Arc delamination likely occurs in mid-crustal levels because middle-crust, heated by nearby magmatism, becomes weak. Accretion of arc material onto the upper plate depends on the characteristics of the arc itself and the geodynamic configuration. Most of the accreted material is probably underplated rather than frontally accreted.
ISSN: 0743-9547

hal-01243080
https://hal.archives-ouvertes.fr/hal-01243080
DOI : 10.1016/j.jseaes.2013.07.043

Éditeur(s) : Gauthier-Villars
Résumé : During Leg 66 eight sites were drilled to form a transect across the Middle America Trench off southwestern Mexico. Cores from these sites show that accretion began approximately 10 MY ago and has continued to the present. Accretion began with offscraping followed by a 2- to 4- MY episode of folding and faulting with uplift rates of 400-500 m/MY; uplift then slowed to 100-200 m/MY, and seismically resolved deformation ceased as the wedge appeared to rise evenly. Approximately 33% of the sediment flux input into the subduction zone, mainly trench sand and slump deposits, is scraped off and incorporated into the toe of the lower slope; an additional 33% is initially subducted but then peeled off to underplate the accretionary wedge; the remaining 33% is subducted landward beneath the overhanging lip of continental crust. Although we find no direct evidence of tectonic erosion, the large amount of sediment subducted makes tectonic erosion feasible.
Oceanologica Acta, Special issue (0399-1784) (Gauthier-Villars), 1981

Droits : info:eu-repo/semantics/openAccess
http://archimer.ifremer.fr/doc/00245/35668/34176.pdf
http://archimer.ifremer.fr/doc/00245/35668/

Éditeur(s) : HAL CCSD European Geosciences Union
Résumé : We designed a thermo-mechanical numerical model for fast-spreading mid-ocean ridge with variable viscosity, hydrothermal cooling, latent heat release, sheeted dyke layer, and variable melt intrusion possibilities. The model allows for modulating several accretion possibilities such as the "gabbro glacier" (G), the "sheeted sills" (S) or the "mixed shallow and MTZ lenses" (M). These three crustal accretion modes have been explored assuming viscosity contrasts of 2 to 3 orders of magnitude between strong and weak phases and various hydrothermal cooling conditions depending on the cracking temperatures value. Mass conservation (stream-function), momentum (vorticity) and temperature equations are solved in 2-D cartesian geometry using 2-D, alternate direction, implicit and semi-implicit finite-difference scheme. In a first step, an Eulerian approach is used solving iteratively the motion and temperature equations until reaching steady states. With this procedure, the temperature patterns and motions that are obtained for the various crustal intrusion modes and hydrothermal cooling hypotheses display significant differences near the mid-ocean ridge axis. In a second step, a Lagrangian approach is used, recording the thermal histories and cooling rates of tracers travelling from the ridge axis to their final emplacements in the crust far from the mid-ocean ridge axis. The results show that the tracer's thermal histories are depending on the temperature patterns and the crustal accretion modes near the mid-ocean ridge axis. The instantaneous cooling rates obtained from these thermal histories betray these discrepancies and might therefore be used to characterize the crustal accretion mode at the ridge axis. These deciphering effects are even more pronounced if we consider the average cooling rates occurring over a prescribed temperature range. Two situations were tested at 1275-1125 °C and 1050-850 °C. The first temperature range covers mainly the crystallization range that is characteristic of the high temperature areas in the model (i.e. the near-mid-oceanic-ridge axis). The second temperature range corresponds to areas in the model where the motion is mainly laminar and the vertical temperature profiles are closer to conductive. Thus, this situation results in less discriminating efficiency among the crustal accretion modes since the thermal and dynamic properties that are described are common to all the crustal accretion modes far from the ridge axis. The results show that numerical modeling of thermo-mechanical properties of the lower crusts may bring useful information to characterize the ridge accretion structure, hydrothermal cooling and thermal state at the fast-spreading ridges and may open discussions with petrological cooling rate results.
ISSN: 1991-959X

hal-00907012
https://hal.archives-ouvertes.fr/hal-00907012
DOI : 10.5194/gmd-6-1659-2013

Éditeur(s) : HAL CCSD American Geophysical Union - AGU
Résumé : IODP Expedition 335 "Superfast Spreading Rate Crust 4" returned to ODP Hole 1256D with the intent of deepening this reference penetration of intact ocean crust several hundred meters into cumulate gabbros. This was the fourth cruise of the superfast campaign to understand the formation of oceanic crust accreted at fast spreading ridges, by exploiting the inverse relationship between spreading rate and the depth to low velocity zones seismically imaged at active mid-ocean zones, thought to be magma chambers. Site 1256 is located on 15-million-year-old crust formed at the East Pacific Rise during an episode of superfast ocean spreading (>200 mm/yr full rate). Three earlier cruises to Hole 1256D have drilled through the sediments, lavas and dikes and 100 m into a complex dike-gabbro transition zone. The specific objectives of IODP Expedition 335 were to: (1) test models of magmatic accretion at fast spreading ocean ridges; (2) quantify the vigor of hydrothermal cooling of the lower crust; (3) establish the geological meaning of the seismic Layer 2-3 boundary at Site 1256; and (4) estimate the contribution of lower crustal gabbros to marine magnetic anomalies. It was anticipated that even a shortened IODP Expedition could deepen Hole 1256D a significant distance (300 m) into cumulate gabbros. Operations on IODP Expedition 335 proved challenging from the outset with almost three weeks spent re-opening and securing unstable sections of the Hole. When coring commenced, the destruction of a hard-formation C9 rotary coring bit at the bottom of the hole required further remedial operations to remove junk and huge volumes of accumulated drill cuttings. Hole-cleaning operations using junk baskets returned large samples of a contact-metamorphic aureole between the sheeted dikes and a major heat source below. These large (up to 3.5 kg) irregular samples preserve magmatic, hydrothermal and structural relationships hitherto unseen because of the narrow diameter of drill core and previous poor core recovery. Including the ~60 m-thick zone of granoblastic dikes overlying the uppermost gabbro, the dike-gabbro transition zone at Site 1256 is over 170 m thick, of which more than 100 m are recrystallized granoblastic basalts. This zone records a dynamically evolving thermal boundary layer between the principally hydrothermal domain of the upper crust and a deeper zone of intrusive magmatism. The recovered samples document a sequence of evolving geological conditions and the intimate coupling between temporally and spatially intercalated intrusive, hydrothermal, contact-metamorphic, partial melting and retrogressive processes. Despite the operational challenges, we achieved a minor depth advance to 1522 m, but this was insufficient penetration to complete any of the primary objectives. However, Hole 1256D has been thoroughly cleared of junk and drill cuttings that have hampered operations during this and previous Expeditions. At the end of Expedition 335, we briefly resumed coring and stabilized problematic intervals with cement. Hole 1256D is open to its full depth and ready for further deepening in the near future.
InterRidge News

hal-00688821
https://hal.archives-ouvertes.fr/hal-00688821

Éditeur(s) : HAL CCSD
Résumé : A section of ancient fast-spreading ocean crust was sampled at Wadi Gideah, located in the Wadi Tayin Massif of the Oman ophiolite. This sample suite was used for generating a coherent data set combining various petro-geochemical and structural investigations, with the aim of building a reference section for advancing our understanding of crustal accretion processes at fast-spreading mid-ocean ridges. Additionally, this study focuses on one outcrop that represents part of the fossil axial melt lens (AML).Major and trace element analyses reveal a trend of chemical evolution up section in the lower crust, with a marked difference between the layered gabbros and the foliated gabbros above. Petrological modeling shows that the chemical evolution up section can be produced by hydrous fractionation crystallization, with melt H2O contents of ~0.8 wt% and 0.8 to 1.2 wt% for the lower and upper crust, respectively. Together with the observed very steep bulk Zr/Hf vs. Zr gradient, high F and Cl content of magmatic amphibole, general Nb-Ta depletion of melts compared with NMORB, and high Sr87/Sr86 ratio compared with modern fast-spread crust, this suggests that Wadi Gideah layered gabbros were accreted by crystallization of ascending melts in sills, in a context of subduction initiation. The distinct changes in chemical trends and average grain size at the layered to foliated gabbro transition are tentatively explained by enhanced hydrothermal cooling deeper than the AML. The gabbro/dike transition displays complex structural and lithological relationships that, together with fractional crystallization modeling, point to episodic vertical movements of the AML. Plagioclase crystallographic preferred orientations (CPO) measured over the whole gabbro section are always consistent with magmatic flow. The CPO strength generally increases downward, with more scattering in the layered gabbro section. From the top to the bottom of the layered gabbros, CPO become progressively more prolate, possibly reflecting increasing shear induced by active mantle flow underneath.Wadi Gideah lower crust recorded a formation history consistent with a hybrid accretion model, combing several processes such as downward magmatic flow and/or upward melt migration in the upper foliated gabbros, sill intrusions in the layered gabbros, and deep hydrothermal circulation. The latter was presumably focused in channels, preserved today as several, up to 100 m wide zones of extensively altered former layered gabbro, cross-cutting the magmatic layering. These metagabbros display significantly higher Sr87/Sr86 ratio, late stage magmatic phases, and evidence for high temperature partial melting.
Une coupe d'ancienne croute océanique rapide a été échantillonnée dans le Wadi Gideah, situé dans le Massif de Wadi Tayin de l'Ophiolite d'Oman. Cette série d'échantillons a permis de générer un jeu de données cohérent, combinant des études pétro-géochimiques et structurales, dans le but de construire une coupe de référence pour mieux contraindre notre compréhension des processus d'accrétion crustale aux dorsales océaniques rapides. Ce travail intègre aussi l'étude détaillée d'un affleurement représentant en partie la lentille magmatique axiale (LMA) fossile.Les analyses d'éléments majeurs et traces révèlent une évolution chimique dans la croûte inférieure, avec une nette différence entre les gabbros lités et les gabbros foliés sus-jacents. La modélisation pétrologique montre que l'évolution chimique vers le haut peut être produite par cristallisation fractionnée hydratée, avec des teneurs en H2O des magmas de ~0.8 wt% dans la croute inférieure et 0.8 to 1.2 wt% dans la croute supérieure. Combiné aux forts gradients de Zr/Hf vs. Zr, aux teneurs élevées de F et Cl dans les amphiboles magmatiques, à l'appauvrissement général en Nb-Ta des magmas comparé aux NMORB, et aux rapports Sr87/Sr86 élevés comparés à la croûte rapide moderne, ceci suggère que les gabbros lités du Wadi Gideah ont été formés par la cristallisation des magmas ascendants dans des sills, dans un contexte d'initiation de subduction. Les changements de signature géochimique et de taille de grain à la transition entre gabbros lités et gabbros foliés témoignent possiblement d'un fort refroidissement hydrothermal plus profond que la LMA. La transition complexe filonien/gabbro montre des relations structurale et lithologiques complexes, qui, combinées o la modélisation de la cristallisation fractionnée, traduisent les mouvements verticaux épisodiques de la LMA. Les orientations préférentielles cristallographiques (OPC) des plagioclases mesurées sur l'ensemble de la coupe dans les gabbros témoignent toujours d'une déformation magmatique. L'intensité des OPC a tendance à augmenter vers le bas, avec une plus forte variabilité dans les gabbros lités. Dans les gabbros lités, les OPC sont de plus en plus linéaires vers le bas, résultant possiblement d'un cisaillement plus fort induit par l'écoulement actif du manteau sous-jacent.La croûte inférieure dans le Wadi Gideah a enregistré une histoire compatible avec un modèle d'accrétion hydride, combinant plusieurs processus tels que l'écoulement magmatique vers le bas et/ou la migration de liquides magmatiques vers le haut dans les gabbros foliés supérieurs, l'intrusion de sills dans les gabbros lités, et une circulation hydrothermale profonde. Cette dernière était probablement concentrée dans des chenaux, préservés aujourd'hui sous la forme de plusieurs zones, dont l'épaisseur atteint 100 m, de gabbros lités fortement altérés, recoupant le litage magmatique. Ces métagabbros ont des rapports Sr87/Sr86 élevés, comportent des phases magmatiques tardives et montrent des évidences de fusion partielle.
https://hal.archives-ouvertes.fr/tel-01302675

tel-01302675
https://hal.archives-ouvertes.fr/tel-01302675
https://hal.archives-ouvertes.fr/tel-01302675/document
https://hal.archives-ouvertes.fr/tel-01302675/file/Th%C3%A8se_Tim-Mueller_2015.pdf

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
We show here that the Amalaoulaou complex, in the Pan-African belt of West Africa (Gourma, Mali), corresponds to the lower and middle sections of a Neoproterozoic intra-oceanic arc. This complex records a 90-130-Ma-long evolution of magmatic inputs and differentiation above a subducting oceanic slab. Early c. 793 Ma-old metagabbros crystallised at lower crustal or uppermost mantle depths (25-30 km) and have geochemical characteristic of high-alumina basalts extracted from a depleted mantle source slightly enriched by slab-derived sedimentary components ((La/Sm)(N) < 1; epsilon(Nd): +5.4-6.2; Sr-87/Sr-86: 0.7027-0.7029). In response to crustal thickening, these mafic rocks were recrystallised into garnet-granulites (850-1,000A degrees C; 10-12 kbar) and subject to local dehydration-melting reactions, forming trondhjemititic leucosomes with garnet-clinopyroxene-rutile residues. Slightly after the granulitic event, the arc root was subject to strong HT shearing during partial exhumation (detachment faults/rifting or thrusting), coeval with the emplacement of spinel- and garnet-pyroxenite dykes crystallised from a high-Mg andesitic parental magma. Quartz and hornblende-gabbros (700-660 Ma) with composition typical of hydrous volcanic rocks from mature arcs ((La/Sm)(N): 0.9-1.8; epsilon(Nd): +4.6 to +5.2; Sr-87/Sr-86: 0.7028-0.7031) were subsequently emplaced at mid-arc crust levels (similar to 15 km). Trace element and isotopic data indicate that magmas tapped a depleted mantle source significantly more enriched in oceanic sedimentary components (0.2%). Exhumation occurred either in two stages (700-660 and 623 Ma) or in one stage (623 Ma) with a final exhumation of the arc root along cold P-T path (550A degrees C, 6-9 kbar; epidote-amphibolite and greenschist facies conditions) during the main Pan-African collision event (620-580 Ma). The composition of magmas forming the Cryogenian Amalaoulaou arc and the processes leading to intra-arc differentiation are strikingly comparable to those observed in the deep section of exposed Mezosoic oceanic arcs, namely the Kohistan and Talkeetna complex. This evolution of the Amalaoulaou oceanic arc and its accretion towards the West African craton belong to the life and closure of the Pharusian Ocean that eventually led to the formation of the Greater Gondwana supercontinent, a similar story having occurred on the other side of the Sahara with the Mozambique Ocean.
ISSN: 0010-7999

hal-00639447
https://hal.archives-ouvertes.fr/hal-00639447
DOI : 10.1007/s00410-011-0624-5

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Gulf of Cadiz spans the plate boundary between Africa and Eurasia west of the Betic–Rif mountain belt. A narrow east dipping subduction zone descends beneath the Gulf of Cadiz and the straits of Gibraltar. The deep crustal structure of the Gulf and the adjacent SW Iberian and Moroccan margins is constrained by numerous multi-channel seismic reflection and wide-angle seismic surveys. A compilation of these existing studies is presented in the form of depth to basement, sediment thickness, depth to Moho and crustal thickness maps. These structural maps image an E–W trending trough, with thin (< 10 km) crust beneath the Gulf of Cadiz. This trough is filled by an eastward thickening wedge of sediments, reaching a thickness of 10–15 km in the eastern Gulf. These sediments are tectonically deformed, primarily along a series of westward-vergent thrust faults and represent a 200–250 km wide accretionary wedge. The northern and especially the southern limits of the accretionary wedge are marked by sharp morphological lineaments showing evidence of recent deformation. These tectonic limits are situated in an internal position with respect to the Miocene deformation front (external Betic and Rif allocthons), which has been abandoned. At the western boundary of the accretionary wedge, near the adjacent Seine and Horseshoe abyssal plains, an E–W trending basement high (Coral Patch Ridge) can be seen indenting the deformation front in an asymmetric manner. Analog modeling is performed using granular materials accreted against a semicircular backstop (representing the basement of the Rif and Betic mountain belts). The modeling initially produces a symmetric, arcuate accretionary wedge. The ensuing collision of an oblique rigid indenter retards accretion on one side, resulting in an embayment and a locally steeper deformation front. The deformation pattern observed in morphology and high-resolution seismic profiles suggests the accretionary wedge and underlying subduction system is still active. The implications of active subduction for the source region of the 1755 Lisbon earthquake and the regional seismic hazard assessment are discussed.
ISSN: 0040-1951

hal-00424922
http://hal.univ-brest.fr/hal-00424922
http://hal.univ-brest.fr/hal-00424922/document
http://hal.univ-brest.fr/hal-00424922/file/Gutscher_09Tphys_rev.pdf
DOI : 10.1016/j.tecto.2008.11.031

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
The Oman ophiolite is regarded as derived from a fast spreading oceanic ridge. As in its present-day marine analogs, expectedly, the gabbro unit crystallized in a large magma chamber underneath a small melt lens. In ophiolites, this melt lens is reduced to a horizon mapped in the field, where the floor and the roof of the melt lens joined. The magmatic activity of the former melt lens has been studied in gabbros located below the melt lens horizon. Beneath a stable melt lens, gabbros subside and drift through the steep walls of the magma chamber as steeply foliated gabbros. In contrast, in unstable melt lenses more specifically considered here, flat-lying gabbros are exposed beneath the lens. These gabbros were settling on the floor while the melt lens was retreating. Their strong magmatic foliations and lineations point to a dynamic deposition on the floor, and lineation trends record the structure of convection rolls within the lens. Time constraints suggest a similar to 100 year periodicity of melt recharge by short and powerful melt pulses followed by a shorter time of convection activity after recharge and a longer period of static magma settling, as recently proposed for the East Pacific Rise. At each new melt pulse, the lens nearly doubles its volume by surface expansion, within a short time lapse, before slowly and progressively retreating to feed crustal accretion. Large horizontal surface inflation of the lens better explains the seawater hydration of the accreting crust than melt lens vertical motion through the lid.
ISSN: 0148-0227

hal-00617452
https://hal.archives-ouvertes.fr/hal-00617452
DOI : 10.1029/2010JB007934

Éditeur(s) : HAL CCSD The Geochemical Society of Japan
Résumé : International audience
The Western Cordillera of Ecuador consists of Cretaceous crustal fragments of oceanic plateaux and superimposed insular arcs, which were accreted to the northwestern South American margin during the Late Cretaceous and Paleocene. Slices of high-grade metabasites, ultramafic rocks, gabbros and basalts, unmetamorphosed radiolarian cherts and scarce garnet-bearing metasediments were randomly exhumed along Miocene to Recent transcurrent faults crosscutting the Western Cordillera. The basalts show geochemical characteristics of oceanic plateau basalts (flat REE patterns, La/Nb = 0.85). The gabbros differ from the basalts in having lower REE levels, positive Eu anomalies, and negative Nb and Ta anomalies; they are interpreted as resulting from arc magmatism. The amphibolites and banded amphibolites have major and trace element chemistry similar to that of oceanic plateau basalts (flat REE patterns, La/Nb = 0.86) or to cumulate gabbros. The granulite shares with oceanic plateaus similar trace element chemistry (flat REE patterns, La/Nb < 1) and εNdi values (+7.6). Continent-derived metasediments are depleted in heavy REE (La/Y = 4.8) and have a negative Eu anomaly. Foliated lherzolites, melagabbronorites and pyroxenites consist of serpentinized olivine + cpx + opx ± Ca-plagioclase. Lherzolites, melagabbronorites and pyroxenites are LREE depleted with positive Eu anomalies, while the harzburgite displays a U-shaped REE pattern. The trace element abundances of the ultramafic rocks are very low (0.1 to 1 times the chondritic and primitive mantle values). The ultramafic rocks represent fragments of depleted mantle, deformed cpx-rich cumulate, and continental lithospheric mantle or mantle contaminated by subduction-fluid. Except the scarce quartz-rich metasediments, all these rocks likely represent remnants of accreted oceanic crustal fragments and associated depleted mantle. Since these samples were randomly sampled at depth by the fault, we propose that the Western Cordillera and its crustal root are mainly of oceanic nature.
ISSN: 0016-7002

insu-00679228
https://hal-insu.archives-ouvertes.fr/insu-00679228

Éditeur(s) : HAL CCSD IODP
Résumé : Integrated Ocean Drilling Program (IODP) Expedition 335 (14 April–4 June 2011) will be the fourth ocean cruise of the "Superfast" campaign to drill a deep hole into intact oceanic basement and will return to Ocean Drilling Program (ODP) Hole 1256D to deepen this scientific reference penetration a significant distance into cumulate gabbros. Cores and data recovered during the Superfast 4 expedition will provide hitherto unavailable observations that will test models of the accretion and evolution of the oceanic crust. Site 1256 was specifically located on oceanic crust that formed at a superfast spreading rate (>200 mm/y) to exploit the observed relationship between spreading rate and depth to axial low velocity zones, thought to be magma chambers, seismically imaged at active mid-ocean ridges. This was a deliberate strategy to reduce the drilling distance to gabbroic rocks because thick sequences of lavas and dikes have proved difficult to penetrate in past. ODP Leg 206 (2002) initiated operations at Site 1256, including the installation in Hole 1256D of a reentry cone with 16 inch casing inserted through the 250 m thick sedimentary cover and cemented into basement to facilitate deep drilling. The hole was then cored ~500 m into basement. IODP Expeditions 309 and 312 (2005) successfully completed the first sampling of an intact section of upper oceanic crust from lavas, through the sheeted dikes, and into the upper gabbros. Hole 1256D now penetrates >1500 meters below seafloor (mbsf) and >1250 m subbasement and currently resides in the dike–gabbro transition zone. The first gabbroic rocks were encountered at 1407 mbsf. Below this lies a ~100 m complex zone of fractionated gabbros intruded into contact metamorphosed dikes. Although previous cruises achieved the benchmark objective of reaching gabbro in intact ocean crust, critical scientific questions remain. These include the following: 1. Does the lower crust form by the recrystallization and subsidence of a high-level magma chamber (gabbro glacier), crustal accretion by intrusion of sills throughout the lower crust, or some other mechanism? 2. Is the plutonic crust cooled by conduction or hydrothermal circulation? 3. What is the geological nature of Layer 3 and the Layer 2/3 boundary at Site 1256? 4. What is the magnetic contribution of the lower crust to marine magnetic anomalies? Hole 1256D is poised at a depth where samples that should conclusively address these questions can be obtained, possibly with only a few hundred meters of drilling. Importantly, as of the end of Expedition 312, the hole was clear of debris and open to its full depth. Increased rates of penetration (1.2 m/h) and enhanced core recovery (>35%) in the gabbros indicate that this return to Hole 1256D could deepen the hole >300 m into plutonic rocks, past the transition from dikes to gabbro, and into a region of solely cumulate gabbroic rocks.
https://hal.archives-ouvertes.fr/hal-00564953

hal-00564953
https://hal.archives-ouvertes.fr/hal-00564953
DOI : 10.2204/iodp.sp.335.2010

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The crust of the Paleoproterozoic West African Craton in northern Ghana is dominantly made of Tonalite-Trondhjemite-Granodiorite (TTG) suites, low-K to high-K calc-alkaline granites, with minor LILE-enriched diorites, and chemically related lavas. Results of zircon U-Pb dating indicate that all these different rock types were formed together over a prolonged period of ca. 100 Ma, between 2.21 and 2.11 Ga. Zircon Hf isotope compositions of five samples are supra-chondritic (εHft from +1 to +6) indicating that the granitoids derive from the reworking of juvenile crustal components as old as 2.60 Ga. Geochemical data show that the TTGs were derived from the reworking of a low-K mafic crust, while biotite granites formed by the reworking of older felsic crustal rocks, and diorites derived from the melting of LILE-enriched mantle sources.The combined datasets support a three-step model for the formation of the crust of the West African craton in northern Ghana: (1) a juvenile, mafic proto-crust was extracted from the depleted mantle between 2.60 and 2.30 Ga, in an oceanic environment remote from any pre-existing continental nucleus; (2) the mafic proto-crust was reworked in several primitive magmatic arcs or in accreted oceanic plateaux. Crustal reworking initially produced minor felsic magmatism between 2.35 and 2.21 Ga, followed by the 2.21–2.15 Ga emplacement of low- to medium-P TTG and K-rich calc-alkaline granitoid suites, and was coeval with the formation of an enriched mantle source. (3) Various proto-continental terranes collided during the Eburnean orogeny between 2.14 and 2.11 Ga, triggering intense reworking of the composite crust and mantle reservoirs formed in the previous two steps, i.e. remnants of the juvenile mafic crust, older TTGs and biotite granites, and previously enriched mantle sources. The emplacement of high-P TTGs, granites and LILE-enriched diorites resulted from lower crustal heating in response to the delamination of the lower crust and lithospheric mantle. The Eburnean collision therefore marks the final stages of a 200–500 Ma long period of juvenile continental crust formation and stabilisation. The datasets further reveal that the Paleoproterozoic West African Craton comprises a minimum of two distinct crustal blocks, with north-western Ghana lying at their interface.
ISSN: 0301-9268

hal-01467999
https://hal.archives-ouvertes.fr/hal-01467999
DOI : 10.1016/j.precamres.2016.10.011

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Geochronological studies of samples from continuous crustal sections of fossil intra-oceanic arcs are paramount for determining the precise timing of major processes that took place during the building of an oceanic island-arc crust. In this study, laser ablation ICP-MS U-Pb zircon (and conventional Rb-Sr) analyses pinpoint the timing of major events responsible for crustal growth of the Kohistan paleo-island arc (Northern Pakistan). Inheritance in magmatic rocks is evidence for recycling of intra-arc material and indicates that the Kohistan arc may have formed as early as 135 +/- 4 Ma. One older inherited grain indicates that the arc developed on a young oceanic lithosphere whose remnants include a c. 175 Ma old component. An interesting consequence is that intra-oceanic arc magmas can yield inherited zircons, which can be much older than the arc system itself without requiring recycling back into the mantle by subduction processes. In the case of the Kohistan arc, ante-arc Neotethys oceanic lithosphere was tapped by arc magmas during their way upward into the arc crust. The oldest magmatic ages measured in this study fall in the range 101-102 Ma (100.9 +/- 0.6 and 102.1 +/- 0.4 Ma). This period corresponds to arc build-up and thickening of the arc crust. Leucogranitic melts dated at 89.9 +/- 0.4 Ma and 90.9 +/- 1.0 Ma are considered as produced by dehydration/melting reaction accompanying granulitisation of the thickened lower arc crust. A maximum age for this event is 97.7 +/- 0.7 Ma, the age of emplacement of a garnet meta-tonalite affected by granulite facies metamorphism. Magmatic activity was still ongoing during and after the granulitisation as testified by emplacement of a diorite and a gabbro dated at 89.1 +/- 0.6 and 88.2 +/- 0.9 Ma respectively. The upper part of the metaplutonic sequence contains diorite samples dated at 84.6 +/- 0.5 Ma and 84.3 +/- 0.5 Ma and as young as 81.1 +/- 0.7 Ma. During this period, and based on the present day outcropping sequences, the mean crustal growth rate varied from 32 to 65 km(3)/km/Ma (volume per unit width along the strike of the arc) which is comparable to the range for present day arcs of the Western Pacific region. The correspondence of crustal growth rates observed for present-day island arcs and the good preservation of the crustal section in the Kohistan arc, make this area an exceptional natural laboratory to study arc related processes and to check models of continental crust formation by arc accretion.
ISSN: 0012-821X

hal-00644555
https://hal.archives-ouvertes.fr/hal-00644555
DOI : 10.1016/j.epsl.2011.07.016

Éditeur(s) : American Geophysical Union
Résumé : We present four companion digital models of the age, age uncertainty, spreading rates, and spreading asymmetries of the world's ocean basins as geographic and Mercator grids with 2 arc min resolution. The grids include data from all the major ocean basins as well as detailed reconstructions of back-arc basins. The age, spreading rate, and asymmetry at each grid node are determined by linear interpolation between adjacent seafloor isochrons in the direction of spreading. Ages for ocean floor between the oldest identified magnetic anomalies and continental crust are interpolated by geological estimates of the ages of passive continental margin segments. The age uncertainties for grid cells coinciding with marine magnetic anomaly identifications, observed or rotated to their conjugate ridge flanks, are based on the difference between gridded age and observed age. The uncertainties are also a function of the distance of a given grid cell to the nearest age observation and the proximity to fracture zones or other age discontinuities. Asymmetries in crustal accretion appear to be frequently related to asthenospheric flow from mantle plumes to spreading ridges, resulting in ridge jumps toward hot spots. We also use the new age grid to compute global residual basement depth grids from the difference between observed oceanic basement depth and predicted depth using three alternative age-depth relationships. The new set of grids helps to investigate prominent negative depth anomalies, which may be alternatively related to subducted slab material descending in the mantle or to asthenospheric flow. A combination of our digital grids and the associated relative and absolute plate motion model with seismic tomography and mantle convection model outputs represents a valuable set of tools to investigate geodynamic problems.
Geochemistry Geophysics Geosystems - G3 (1525-2027) (American Geophysical Union), 2008-04 , Vol. 9 , P. NIL_18-NIL_36

Droits : 2008 American Geophysical Union
http://archimer.ifremer.fr/doc/2008/publication-3900.pdf
DOI:10.1029/2007GC001743
http://archimer.ifremer.fr/doc/00000/3900/

Éditeur(s) : Elsevier Science Bv
Résumé : The rollback of a segmented slab of oceanic lithosphere is typically accompanied by vertical lithospheric tear fault(s) along the lateral slab edge(s) and by strike slip movement in the upper plate, defined as a STEP fault (Subduction Tear Edge Propagator). The Neogene evolution of the Central Mediterranean is dominated by the interaction between the slow Africa–Eurasia convergence and the SE-ward rollback of the Ionian slab, that leads to the back-arc opening of the Tyrrhenian Sea. Here, we present post-stack time migrated and pre-stack depth migrated Archimede (1997) multichannel seismic lines, that were acquired offshore eastern Sicily, at the foot of the Malta escarpment. First, we identify the recent deformation along the lateral ramp of the Calabrian accretionary wedge. Towards the east, the Calabrian wedge is formed by the accretion of the post-evaporitic sediments, above a decollement at the base of the Messinian evaporites. At the latitude of Syracuse, 50 km east of the Malta escarpment, a major N150°E trending crustal scale and vertical fault slices through the entire accretionary wedge. This fault cuts by several kilometers, through the pre-evaporitic Messinian sediments and into the basement. The vertical offset along this vertical fault decreases from north to south, and the fault is no longer observed on the seismic lines, 50 km SE of the Alfeo seamount. A previously published Moho depth isocontour map, offshore Sicily and the recent GPS data, combined with the presence of strike slip movements NE onshore Sicily, allow us to identify this 200 km long crustal-scale fault as the surface expression of a STEP fault. The presence of syntectonic Pleistocene sediments on top this crustal-scale fault suggests a recent lithospheric vertical movement of the STEP fault, in response to the rollback of the Ionian slab and to the SE-ward advance of the Calabria-Peloritan block
Tectonophysics (0040-1951) (Elsevier Science Bv), 2013-08 , Vol. 602 , P. 141-152

Droits : 2013 Elsevier B.V. All rights reserved.
http://archimer.ifremer.fr/doc/00118/22878/21386.pdf
DOI:10.1016/j.tecto.2012.12.026
http://archimer.ifremer.fr/doc/00118/22878/

Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
Mélange rocks outcrop widely in the central and western frontal sectors of the Betic Cordillera, as in many other collisional orogens where they form part of the accretionary wedges. Extrusion of Triassic plastic clays and evaporites was favored by the progressive accretion of the Betic External Zones, mixing rocks of different provenance and forming a synorogenic frontal mélange unit. MT data coupled with gravity data are a valid combined methodology to characterize the geometry of these mélange units, since the characterization of plastic rocks geometry is usually uncertain using seismic techniques. The results correlate well with known geological features (sedimentary basins, calcareous ranges, evaporitic rocks) and reveal the deep geometry. A resistive body, slightly dipping toward the SE, points to the continuity of the Iberian Massif below the Guadalquivir basin (2°) and the External Zones (6-8°). To the south, gravity models show the Iberian continental crust subducting below the Internal Zones with a roughly 20-35° slope. The main conductive bodies are related to the location of evaporitic rocks involved in the frontal mélange. They overlie the Iberian Massif and, southwards, the frontal Jurassic and Cretaceous limestone sequences of the External and Median Subbetics. In this setting, thick plastic rock units placed above the foreland could act as a lubricant facilitating continental subduction, and being progressively accreted toward a frontal mélange.
ISSN: 1525-2027

hal-00750364
https://hal.archives-ouvertes.fr/hal-00750364
DOI : 10.1029/2012GC004153

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
The Iberian Massif is the best exposed segment of the European Variscan Belt. It includes relatively well preserved terranes that were accreted by transpression along time and resulted in a number of geotectonic units that formed part of the Late Paleozoic assembly of the Pangaea Supercontinent. In SW Iberia, these units are the Central Iberian Zone (CIZ), Ossa Morena Zone (OMZ), and the South Portuguese Zone (SPZ). A 210 km long NE-SW magnetotelluric profile was carried out through the CIZ, from the OMZ-CIZ boundary toward the north, reaching the Tagus (Cenozoic) basin. Data dimensionality analysis resulted in a suitable 2-D electrical resistivity structure, allowing a 2-D inversion of the data set. Complementary available geophysical data (deep seismic, gravity and aeromagnetic) and a comparison with a detailed geological cross section led us to constrain the interpretation of the 2-D electrical resistivity structure of the CIZ crust. The results show, for the upper crust, the existence of diverse conductive/resistive bodies that correlate well with known geological features (sedimentary basins, faults, granitic plutons, mineralized systems). A mild but steady conductive band is located along the middle and lower crust that is interpreted as a mafic granulite basement. The upper section of this band connects with several elongated shallow conductors, providing further evidence for the existence, in the Central Iberian Zone, of a complex decollement system where the major faults are rooted. Such a crustal architecture is viewed as the northward continuation of the Variscan large-scale structures previously recognized in the southern sectors (OMZ and SPZ).
ISSN: 0148-0227

hal-00671036
https://hal.archives-ouvertes.fr/hal-00671036
DOI : 10.1029/2010JB007538

Éditeur(s) : Soc Geol France
Résumé : The Lesser Antilles subduction zone has produced no recent strong thrust earthquakes, making it difficult to quantify the seismic hazard from such events. The Lesser Antilles arc has a low subduction rate and an accretionary wedge that is very wide at its southern end. To investigate the effect of the wedge on seismogenesis, numerical models of forearc thermal structure were constructed along six transects perpendicular to the arc in order to determine the thermally predicted width of the seismogenic zone. The geometry of each section is constrained by published seismic profiles and crustal models derived from gravity and seismic data and by earthquake hypocenters at depth. A major constraint on the deep part of the model is that mantle temperature beneath the volcanic arc should achieve a temperature of 1,100 degrees C to generate partial melts. Predicted surface heat flow is compared to the available heat flow observations. Thermal modeling results indicate a systematic southward increase in the width of the seismogenic zone, more than doubling in width from north to south and corresponding to a dramatic southward increase in forearc width (distance from the arc to the deformation front of the accretionary wedge). The minimum width of the seismogenic zone (distance between the intersections of the subduction interface with the 150 degrees C and 350 degrees C isotherms) increases from about 80 km, north of 16 degrees N, to 230 km, at 13 degrees N. The maximum width (between the 100 degrees C and 450 degrees C isotherms) ranges from about 150 km in the north to up to 320 km in the south. This large variation in the width of the seismogenic zone is a consequence of the increasing width of the accretionary wedge to the south, caused by the increased thickness of sediment on the subducting plate. There is good agreement between the thermally predicted seismogenic limits and the sparse distribution of recorded thrust earthquakes, which are observed only in the northern portion of the arc. Possible scenarios for mega-thrust earthquakes are discussed. Depending on the segment length (along-strike) of the rupture plane, the occurrence of an event of magnitude 8-9 cannot be excluded.
L’absence de grands séismes récents à mécanismes chevauchants dans la zone de subduction des Petites Antilles rend difficile l’évaluation de l’aléa sismique lié à de tels événements. L’arc des Petites Antilles est caractérisé par une faible vitesse de subduction et par la présence d’un prisme d’accrétion très développé à son extrémité méridionale. Afin d’évaluer les effets de la largeur de ce prisme sur la genèse des séismes, nous avons étudié six sections perpendiculaires à l’arc, du nord au sud de celui-ci, pour déterminer la largeur de la zone sismogène prédite par les modèles thermiques appliqués à chacune de ces coupes. La géométrie de ces dernières est contrainte par les profils sismiques publiés, par les modèles de structure crustale déduits des données gravitaires et sismiques, et enfin par la distribution des hypocentres des séismes. Un contrôle important permettant de tester la validité des modèles thermiques en profondeur est qu’une température minimale de 1 100oC, compatible avec la fusion partielle du manteau hydraté, doit être atteinte sous l’arc volcanique actif. Par ailleurs, le flux thermique en surface prédit par ces modèles doit être compatible avec les mesures de flux de chaleur. Les modèles thermiques retenus d’après ces critères montrent une augmentation du simple au double vers le sud de la largeur de la zone sismogène, qui correspond à un élargissement considérable de la taille du domaine avant-arc. En effet, la largeur minimale de la zone sismogène (définie comme la distance entre les intersections de l’interface des plaques avec les isothermes 150o et 350oC) augmente d’environ 80 km au nord de 16oN jusqu’à 230 km à 13oN. La largeur maximale de cette zone (définie par les intersections de l’interface avec les isothermes 100o et 450oC) augmente, quant à elle, d’environ 150 km au nord jusqu’à 320 km au sud de l’arc. Cette variation considérable est la conséquence de l’augmentation de la largeur du prisme d’accrétion, elle-même causée par l’accumulation croissante des sédiments déposés sur la plaque plongeante. Les largeurs de la zone sismogène prédites à l’aide des modèles thermiques sont en bon accord avec les rares données disponibles sur les séismes à mécanismes chevauchants dans la partie nord de l’arc. Les scénarios possibles relatifs à des méga-séismes de ce type n’excluent pas de futurs événements atteignant des magnitudes de 8 à 9.
Bulletin De La Societe Geologique De France (0037-9409) (Soc Geol France), 2013 , Vol. 184 , N. 1-2 , P. 47-59

Droits : 2013 Societe Geologique de France
http://archimer.ifremer.fr/doc/00140/25140/29432.pdf
DOI:10.2113/gssgfbull.184.1-2.47
http://archimer.ifremer.fr/doc/00140/25140/

Éditeur(s) : HAL CCSD
Résumé : In this work on a complete transect of the west‐central Pyrenees, we combine low temperature thermochronology (apatite fission tracks, AFT) with a detailed structural analysis to describe vertical movements related to the thrusting system evolution, and to determine the influence of the latter on the sedimentation/burial/exhumation cycle of thesynorogenic deposits of the southern foreland basin (Jaca and Ainsa basins). AFT analysis from a transect of the south‐Pyrenean basin show the southward decrease of the fission track reset level from the southern edge of the Axial Zone to the South‐Pyreneanfrontal thrust, implying the southwards decrease of the burial amount from more than 5kmin the north to less than 3km in the south assuming an average geothermal gradient of 25°C.km‐1. The structural setting of the Jaca basin attests that the burial of the synorogenicsediments was mainly due to the sedimentary accumulation. AFT data from the northernpart of the basin display a late Oligocene‐early (middle) Miocene cooling event. Newinterpretation of industrial seismic reflection profiles across the Jaca basin suggests that the Oturia thrust is rooted in the Bielsa basement thrust, responsible for the early (‐middle) Miocene out‐of‐sequence tectonic reactivation of the southern flank of the Axial Zone (Jolivet et al., 2007). These results reveal a lower Miocene (Burdigalian ‐?Langhian) out‐of sequence episode of tectonic activity of the interior of the south‐Pyrenean foreland basin. AFT data from the Axial Zone and the North‐Pyrenean Zone confirm the general southwardmigration of the thrusting system, and also bring evidence of the late Oligocene‐lowe rMiocene out‐of‐sequence tectonic reactivation of the northern flank of the Axial Zone. All these results attest of a late Oligocene‐lower Miocene (Burdigalian‐?Langhian) "pop‐up" reactivation of the inner part of the west‐central Pyrenees, younger than the sealing of thesouth‐Pyrenean front (Aquitanian‐?Burdigalian) which is classically considered to mark the end of the Pyrenean compression. These results lead us to propose a new crustal scale evolution model of the west‐central Pyrenees in 3 stages: (i) From the Late Cretaceous to themiddle Eocene, the orogenic prism is characterised by the absence of relief, related to theinversion of Cretaceous extensional structures leading to the accretion of thin crustal units; (ii) The late Eocene‐Oligocene stage corresponds to the continental collision, marked by the creation of important relief associated with the accretion of thick crustal units; (iii) During the early Miocene, the inner part of the Pyrenean wedge is tectonically reactivated.
Ce travail de thèse concerne une transversale complète des Pyrénées centro-occidentales, où on a combiné la thermochronologie basse température (traces de fission sur apatites, TFA) avec une analyse structurale détaillée pour décrire les mouvements verticaux associés à l'évolution du système chevauchant, et pour déterminer l'influence de ce dernier sur le cycle sédimentation/enfouissement/exhumation des dépôts synorogéniques du bassin d'avant‐chaine sud (bassins de Jaca et Ainsa). L'analyse TFA complète les données déjà publiées dans la Zone Axiale et la Zone Nord‐Pyrénéenne, e tconstitue la première étude de ce genre dans un bassin d'avant‐chaîne pyrénéen. Les données TFA sur la transversale du bassin sud‐pyrénéen montrent une diminution vers le sud du degré d'effacement des traces de fission, traduisant la diminution vers le sud de la quantité d'enfouissement, supérieure à 5 km au nord et inférieure à 3 km au sud dans l'hypothèse un géotherme de 25°.km‐1. Le contexte géologique montre que l'enfouissement est principalement lié à l'accumulation des dépôts synorogéniques. Les données TFA de lapartie nord du bassin montrent un refroidissement d'âge Oligocène supérieur‐Miocèneinferieur (moyen). Par ailleurs, une nouvelle interprétation de profils de sismiques réflexiondans le bassin de Jaca montre que le chevauchement d'Oturia s'enracine dans lechevauchement de socle de Bielsa, responsable de l'exhumation tectonique hors‐séquencedu bord sud de la Zone Axiale au Miocène inférieur (‐moyen) (Jolivet et al., 2007). Cesrésultats attestent donc de l'exhumation tectonique hors‐séquence au Miocène inférieur (Burdigalien‐ ?Langhien) de la partie nord du bassin d'avant‐chaine sud‐pyrénéen. Des données TFA obtenues dans la Zone Axiale et la Zone Nord‐Pyrénéenne confirment lamigration générale vers le sud du système chevauchant, et mettent également en évidencela réactivation tectonique hors‐séquence du bord nord de la Zone Axiale à l'Oligocèneterminal‐Miocène inférieur. L'ensemble de ces résultats atteste donc de la réactivation en " pop‐up " de la parties interne des Pyrénées centre‐ouest à l'Oligocène supérieur‐Miocèneinférieur (Burdigalien‐ ?Langhien), postérieurement au scellement du front sud‐pyrénéen (Aquitanien‐ ?Burdigalien) classiquement considéré comme marquant la fin de lacompression pyrénéenne. Ces données nous ont permis de proposer un nouveau modèle d'évolution crustale des Pyrénées centro‐occidentales en 3 grandes étapes : (i) du Crétacé supérieur à l'Eocène moyen, le prisme est caractérisé par une absence de relief, en lien avec l'inversion de structures extensives crétacées conduisant à l'accrétion de petites écailles crustales ; (ii) la période Eocène supérieur‐Oligocène correspond à la collision continentale proprement dite, et est marquée par la création d'importants reliefs associés à l'accrétion d'épaisses unités crustales ; (iii) au Miocène inférieur, la partie interne du prisme pyrénéen est réactivée.
https://tel.archives-ouvertes.fr/tel-00772154

Droits : info:eu-repo/semantics/OpenAccess
tel-00772154
https://tel.archives-ouvertes.fr/tel-00772154
https://tel.archives-ouvertes.fr/tel-00772154/document
https://tel.archives-ouvertes.fr/tel-00772154/file/thesemeresse.pdf

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We present new Sr-Nd-Pb isotope data of the western Alpujárride metamorphic basement and the pre-Miocene Flysch sediments of the Betic Cordillera (southern Spain). Nd model ages are consistent with an increasing detrital input from the Alborán domain to the Flysch Trough in the western Mediterranean during the late Oligocene. The Alpujárride metamorphic crustal rocks derived from Archean-Paleoproterozoic terranes located along the northern margin of Gondwana in the Neoproterozoic. The heterogeneous isotopic signatures of the Alpujárride units indicate that they have different sedimentary protoliths and underwent contrasted Variscan and pre-Variscan tectono-magmatic evolutions. Melts/fluids derived from the western Alpujárride gneisses contaminated the mantle source of the Ronda high-Mg pyroxenite dykes, implying that the Alpujárride lower crust underthrusted the subcontinental lithospheric mantle of the Alborán domain generating subduction-like magmatism in the late Oligocene. The western Alpujárride upper crust is involved in the Neogene volcanism of the Alborán Sea basin, but only contaminated some LREE-enriched calc-alkaline lavas erupted along the continental margins. On the other hand, tholeiitic lavas in the center of the basin show no isotopic evidence of crustal assimilation. This indicates that most of the crust in the central Alborán Sea accreted by Miocene tholeiitic magmatism and that Alpujárride lower crust is absent and likely foundered close to the continental margins of the basin.
ISSN: 0024-4937

hal-01526912
https://hal.archives-ouvertes.fr/hal-01526912
DOI : 10.1016/j.lithos.2016.10.003