Éditeur(s) : HAL CCSD Oxford University Press (OUP): Policy B - Oxford Open Option B
Résumé : International audience
To recover verticality after disturbance, angiosperm trees produce " tension wood " allowing them to bend actively. The driving force of the tension has been shown to take place in the G-layer, a specific unlignified layer of the cell wall observed in most temperate species. However, in tropical rain forests, the G-layer is often absent and the mechanism generating the forces to reorient trees remains unclear. A study was carried out on tilted seedlings, saplings and adult Simarouba amara trees – a species known to not produce a G-layer. Microscopic observations were done on sections of normal and tension wood after staining or observed under UV light to assess the presence/absence of lignin. We showed that S. amara produces a cell-wall layer with all of the characteristics typical of G-layers, but that this G-layer can be observed only as a temporary stage of the cell-wall development because it is masked by a late lignification. Being thin and lignified, tension wood fibres cannot be distinguished from normal wood fibres in the mature wood of adult trees. These observations indicate that the mechanism generating the high tensile stress in tension wood is likely to be the same as that in species with a typical G-layer and also in species where the G-layer cannot be observed in mature cells.
ISSN: 0829-318X

hal-01229280
https://hal.archives-ouvertes.fr/hal-01229280
https://hal.archives-ouvertes.fr/hal-01229280/document
https://hal.archives-ouvertes.fr/hal-01229280/file/Roussel-Clair-2015-TreePhysiol-LateLignifGLayerSimarouba_preprintHAL.pdf
DOI : 10.1093/treephys/tpv082

Éditeur(s) : HAL CCSD
Résumé : International audience
A key element of the biomechanical design of trees is their ability to generate largemechanical stresses in wood at the stem periphery. This function is necessary for the tree tocontrol the orientation of its axes, and therefore to grow in height, maintain its branches at anoptimal angle or achieve adaptive reorientations (Fournier et al., 2013). This “maturationstress” appears in wood fibres during their cellular maturation when their secondary cell wallis thickening. In hardwoods, the stress asymmetry is generated by the formation of specificfibres with a very high tensile growth stress on the upper side of the inclined axis. Theresulting tension wood has microstructural features highly different from the normal wood.Tension wood in almost all temperate species has a specific gelatinous cell wall layer, calledG-layer, that is not lignified and highly mesoporous (Chang et al., 2015). It has been shownrecently, at the macroscopic scale, that cellulose tension appears during maturation and issynchronous with the development of this specific layer (Clair et al., 2011). Tropical species,like simarouba, are able to generate lignified tension wood fibres. The mechanisms of stressgeneration in tension wood fibres are not yet well known. The aim of our study is tounderstand these mechanisms and to know the spatial and temporal kinetics of the differentcell wall layers stiffening during maturation, in parallel with tensile stress generation.Contact-Resonance Atomic Force Microscopy, CR-AFM, was used here to address thisquestion on embedded samples (Arnould and Arinero, 2015) using dual resonance frequencytracking (DRFT, Rodriguez et al., 2007). Change in the contact modulus between, and within,each layer of the cell wall has been measured on several radial lines of developing fibres atdifferent steps. In order to understand the obtained results, and to estimate the sensitivity ofthe AFM indentation-like technique to the different cell wall components stiffness, an elasticanisotropic indentation model was used (Vlassak et al., 2003; Jäger et al., 2011). Finally,these mechanical measurements have been compared to topochemical data obtained on thesame fibres.
8th Plant Biomechanics International Conference
Nagoya, Japan

hal-01436113
https://hal.archives-ouvertes.fr/hal-01436113

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
Tension wood of Laetia procera (Poepp.) Eichl. (Flacourtiaceae), a neo-tropical forest species, shows a peculiar secondary wall structure, with an alternance of thick and thin layers, while opposite wood of this species has a typical secondary wall structure (S1 + S2 + S3). Samples for the study of microstructural properties were collected upon the estimation of growth stresses in the living tree, in order to analyze the correlation of the former with the latter. Investigation using optical microscopy, scanning electron microscopy and UV microspectrophotometry allowed the description of the anatomy, ultra-structure and chemistry of this peculiar polylaminate secondary wall. In the thick layers, cellulose microfibril angle is very low (i.e., microfibril orientation is close to fibre axis) and cellulose microfibrils are well organized and parallel to each other. In the thin layers, microfibrils (only observable in the inner layer) are less organized and are oriented with a large angle relative to the axis of the cell. Thick layers are lightly lignified although thin layers show a higher content of lignin, close to that of opposite wood secondary wall. The more the wood was under tensile stress, the less the secondary wall was lignified, and lower the syringyl on guaiacyl lignin units' ratio was. The innermost layer of the secondary wall looks like a typical S3 layer with large microfibril angle and lignin occurrence. The interest of this kind of structure for the understanding of stress generation is discussed.
ISSN: 0931-1890

hal-00194923
https://hal.archives-ouvertes.fr/hal-00194923
https://hal.archives-ouvertes.fr/hal-00194923/document
https://hal.archives-ouvertes.fr/hal-00194923/file/Trees_RuelleYoshidaClairThibaut_submitted2006.pdf
DOI : 10.1007/s00468-007-0128-0

Éditeur(s) : HAL CCSD
Résumé : International audience
Tension wood, a tissue developed by angiosperm trees to actively recover their verticality, has long been defined by the presence of an unlignified cellulosic inner layer in the cell wall of fibres, called the G-layer. Although it was known that some species have no G-layer, the definition was appropriate since it enabled easy detection of tension wood zones using various staining techniques for either cellulose or lignin. For several years now, irrespective of its anatomical structure, tension wood has been defined by its high mechanical internal tensile stress. This definition enables screening of the diversity of cell walls in tension wood fibres. Recent results obtained in tropical species with tension wood with a delay in the lignification of the G-layer opened our eyes to the effective presence of large amounts of lignin in the G-layer of some species. This led us to review older literature mentioning the presence of lignin deposits in the G-layer and give them credit. Advances in the knowledge of tension wood fibres allow us to reconsider some previous classifications of the diversity in the organisation of the fibre walls of the tension wood.
ISSN: 0928-1541

hal-01636686
https://hal.archives-ouvertes.fr/hal-01636686
https://hal.archives-ouvertes.fr/hal-01636686/document
https://hal.archives-ouvertes.fr/hal-01636686/file/2017_Ghislain-Clair_IAWAJ_DiversityOrganisationLignificationTensionWoodFibreWalls-AReview.pdf
DOI : 10.1163/22941932-20170170

Éditeur(s) : HAL CCSD
Résumé :   Diplôme : DEA
il s'agit d'un type de produit dont les métadonnées ne correspondent pas aux métadonnées attendues dans les autres types de produit : DISSERTATION
La lumière est le principal facteur limitant de la croissance en forêt tropicale humide. Malgré 1% du rayonnement incendie disponible en sous-bois, les jeunes arbres doivent rejoindre la canopée pour assurer la régénération du couvert. La compétition pour l'accès à la lumière est forte, et leur stabilité mécanique est souvent perturbée. La gravité étant un facteur omniprésent , tout déséquilibre entraîne des flexions de l'arbre et peut-être dramatique. Les arbres peuvent cependant palier ces déséquilibres en réorientant leurs axes par gravitropisme. Les "moteurs" des réorientations dans les axes lignifiés, sont la croissance radiale, la différentiation de bois de réaction et souvent, une croissance radiale excentrée.La capacité au redressement dépend aussi des dimensions des axes. Ces différents paramètres modulent donc la réponse gravitropique. Les réorientations dépendent de la croissance et donc également des ressources en lumière. Ce travail avait pour buts de quantifier l'impact de la croissance radiale sur le redressement d'une espèce tropicale et de mettre en évidence d'éventuelles différences d'efficience, de réorientation des arbres en fonction de la disponibilité en lumière. La réponse gravitropique de jeunes Symphonia globulifera artificiellement inclinés a été étudiée sous deux niveaux de lumière (1% et 25%°). L'importance de la croissance radiale dans la réaction gravitropique a été quantifiée par une analyse cinématique du redressement et l'utilisation d'un modèle biomécanique simple. Ce travail montre que même à 1% de lumière, les arbres ont une réponse gravitropique. L'efficience de réaction est d'ailleurs plus forte qu'à 25% de lumière. Cette réaction semble donc être une fonction prédominante pour les plantes en sous-bois. Nous avons également montré que le redressement est fortement corrélé à la vitesse de croissance radiale. Les données obtenues complètent celles déjà acquises sur des espèces tempérées. Elles permettront des comparaisons interspécifiques du processus gravitropique et serviront à valider des modèles biomécaniques plus complexes que celui utilisé dans cette étude.
https://hal.archives-ouvertes.fr/hal-01189227

hal-01189227
https://hal.archives-ouvertes.fr/hal-01189227
PRODINRA : 16967

Éditeur(s) : HAL CCSD Wiley
Résumé : International audience
In order to progress in the understanding of mechanical stress generation, the mesoporosity of the cell wall and its changes during maturation of poplar (Populus deltoides x P. nigra) tension wood (TW) and opposite wood (OW) were measured by nitrogen adsorption–desorption. Variations in the thickness of the gelatinous layer (G-layer) were also measured to clarify whether the mesoporosity change simultaneously with the deposition of the G-layer in TW. Results show that mesoporous structures of TW and OW were very similar in early development stages before the deposition of G-layers. With the formation of the S2 layer in OW and the G-layer in TW, the mesopore volume decreased steeply before lignification. However, in TW only, the decrease in mesopore volume occurred together with the pore shape change and a progressive increase in pore size. The different patterns observed in TW revealed that pores from G-layers appear with a different shape compared to those of the compound middle lamella, and their size increases duringthe maturation process until stabilising in mature wood. This observation strongly supports the hypothesis of the swelling of the G-layer matrix during maturation as the origin of maturation stress in poplar tension wood.
ISSN: 0028-646X

hal-01081834
https://hal.archives-ouvertes.fr/hal-01081834
https://hal.archives-ouvertes.fr/hal-01081834/document
https://hal.archives-ouvertes.fr/hal-01081834/file/Chang_al_Mesoporosity_changes_New-Phyto._2015.pdf
DOI : 10.1111/nph.13126