Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Mongolia represents the northernmost area affected by the India–Asia collision, and it is actively deformed along transpressive belts closely associated with large-scale strike-slip faults. The active and past mantle flow beneath this region is, however, poorly known. In order to investigate deep mantle deformation beneath central Mongolia and its relation with the surrounding major structures such as the Siberian craton, the Gobi–Altay belt and the Baikal rift, a NS-trending profile of broadband seismic stations has been deployed in the summer 2003 from the southern Siberian craton to the Gobi–Altay range, crossing the entire Hangay dome. Mantle flow is deduced from the splitting of teleseismic shear waves such as SKS phases. In eastern Mongolia, the permanent station ULN in Ulaanbaatar reveals the presence of two anisotropic layers, the upper one being oriented NE–SW, close to the trend of lithospheric structures and the lower one NW–SE, close to the trend of Eurasia absolute plate motion. Along the NS profile in central Mongolia, seismic anisotropy deduced from SKS splitting reveals a homogeneous NW–SE trending structure, fully consistent with the observations made in the Altay–Sayan in western Mongolia. The observed delay times of 1.5 to more than 2.0 s favor consistent mantle flow over large mantle thicknesses. Since the lithosphere is less than 100 km thick beneath central Mongolia and since the observed fast directions are parallel to the trend of the lithospheric structures but also close to the trend of the absolute plate motion, we propose that both the lithosphere and the asthenosphere may join their anisotropic effects beneath central Mongolia to explain the large delay times. Although GPS vectors represent the instantaneous displacement of the Earth's surface and SKS splitting the time and vertical integration of finite strain at depth, we use the opportunity of the dense geodetic measurements available in this region to discuss the anisotropy pattern in term of present-day deformation. In the Eurasia-fixed reference frame, GPS and SKS both depict a similar trend beneath central Mongolia, suggesting a lithospheric block “escaping” toward the east that could orient olivine a-axes in the upper mantle, within a transpressive tectonic regime. A different behaviour is observed in western Mongolia: the GPS vectors trend NS, close to the regional compression direction, whereas the fast SKS directions trend EW, suggesting a tectonic regime close to a mode of axial shortening, generating the development of an EW-trending foliation at depth. We therefore propose that Mongolia is a place where active and frozen lithospheric deformation may add their effects, together with the sublithospheric flow. In the three sources of anisotropy inferred, a fundamental role is played by the Siberian craton that acted as an undeformable core of the continent through time: the frozen Paleozoic and Mesozoic structures wrap around the craton, building up the fast anisotropic direction pattern; the present-day sublithospheric flow induced by the plate motion is likely deflecting around its deep roots; finally, the present-day tectonic regime appears to be controlled by the presence of the craton to the north.
ISSN: 0012-821X

hal-00407853
https://hal.archives-ouvertes.fr/hal-00407853
https://hal.archives-ouvertes.fr/hal-00407853/document
https://hal.archives-ouvertes.fr/hal-00407853/file/Barruol_SKS_Mongolia_EPSL2008_hal.pdf
DOI : 10.1016/j.epsl.2008.07.027

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
The Nile delta sedimentation constitutes a continuous high resolution (1.6 mm/year) record of Ethiopian African monsoon regime intensity. Multiproxy analyses performed on core MS27PT recovered in hemipelagic Nile sediment margin (<90 km outward of the Rosetta mouth of the Nile) allow the quantification of the Saharan aeolian dust and the Blue/White Nile River suspended matter frequency fluctuations during the last 21 cal. ka BP. The radiogenic Sr and Nd isotopes, clay mineralogy, bulk elemental composition and palynological analyses reveal large changes in source components, oscillating between a dominant aeolian Saharan contribution during the LGM and the Late Holocene (~4 to 2 cal. ka BP), a dominant Blue/Atbara Nile River contribution during the early Holocene (15 to 8.4 cal. ka BP) and a probable White Nile River contribution during the Middle Holocene (8.4 to 4 cal. ka BP). The following main features are highlighted: 1. The rapid shift from the LGM arid conditions to the African Humid Period (AHP) started at about 15 cal. ka BP. AHP extends until 8.4 cal. ka BP, and we suggest that the Ethiopian African Monsoon maximum between 12 and 8 cal. ka BP is responsible for a larger Blue/Atbara Nile sediment load and freshwater input into the Eastern Mediterranean Sea. 2. The transition between the AHP and the arid Late Holocene is gradual and occurs in two main phases between 8.4 and 6.5 cal. ka BP and 6.5 to 3.2 cal. ka BP. We suggest that the main rain belt shifted southward from 8.4 to ~4 cal. ka BP and was responsible for progressively reduced sediment load and freshwater input into the eastern Mediterranean Sea. 3. The aridification along the Nile catchments occurred from ~4 to 2 cal. ka BP. A dry period, which culminates at 3.2 cal. ka BP, and seems to coincide with a re-establishment of increased oceanic primary productivity in the western Mediterranean Sea. We postulate that the decrease in thermo-haline water Mediterranean circulation could be part of a response to huge volumes of fresh-water delivered principally by the Nile River from 12 to 8.4 cal. ka BP in the eastern Mediterranean. We propose that the large hydrological change in Ethiopian latitude could be a trigger for the 8.2 ka cooling event recorded in high latitude. Revel R., Colin C., Bernasconi S., Combourieu-Nebout N., Ducassou E., Grousset F.E., Rolland Y., Migeon S., Brunet P., Zhaa Y., Bosch D., Mascle J.,. "21,000 years of Ethiopian African moonsoon variability recorded in sediments of the western Nile deep sea fan", Regional Environmental Change,
ISSN: 1436-3798

hal-00836300
https://hal.archives-ouvertes.fr/hal-00836300

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We discuss mantle structure and dynamics under the Gibraltar arc. For that region, a large variety of geodynamic models has been proposed, and there was, up to recently, no consensus on which of these models is the best one to describe the geodynamic situation of the region. The key to distinguishing the different models probably lies in the upper mantle, and we propose two specially adapted seismological techniques that help to distinguish each of the two models that are more frequently invoked. These are, on one hand, the subduction-rollback (SR) model, and on the other, continental delamination or convective removal (CDCR). The first technique that we use is based on observations of dispersed P-wavetrains that are expected for certain ray directions. Observations made on the Gibraltar arc suggest the presence of subducted oceanic lithosphere under the Alboran Sea. The second technique is based on shear-wave splitting of SKS phases, and it allows us to look for the radially-oriented flow that must be present in the mantle beneath the Alboran Sea, for a CDCR mechanism. There are however no indications of any radial flow up to this point. Both approaches therefore suggest that subduction-rollback is the best model to explain the complex geodynamic situation under the region.
ISSN: 0040-1951

hal-01388041
http://hal.univ-reunion.fr/hal-01388041
http://hal.univ-reunion.fr/hal-01388041/document
http://hal.univ-reunion.fr/hal-01388041/file/Bokelmann_Gibraltar_Tphy2011_hal.pdf
DOI : 10.1016/j.tecto.2010.08.004

Éditeur(s) : HAL CCSD
Résumé : International audience
The Rif Chain (Northern Morocco) belongs, with the Betic Cordillera(Southern Spain), to the western termination of the Alpine belt. Deepestunits of the Rif Internal Zones (i.e. Lower Sebtides) outcrop in three areas, from North to South : Ceuta, Cabo Negro and Beni Bousera.The quick exhumation of these units during the Late Oligocene-EarlyMiocene is related with a crustal thinning and the Alboran Sea rifting.Despite Beni Bousera massif has been well investigated, no data areavailable in Ceuta and Cabo Negro areas. This study aims to constrainthe last steps of cooling and exhumation in the Lower Sebtides usingmedium- and low-temperature thermochronological data. Combinationof Ar-Ar on micas, fission tracks and (U-Th)/He on apatites (respectivelyAFT and AHe) from high-grade rocks allows understanding thermalhistory between 450-350°C and surface temperatures. These datasuggest a similar cooling evolution of the Ceuta and Cabo Negro units.Ages obtained with all these methods are comprised in the same interval,between 22 and 18 Ma. These data record an almost instantaneouscooling (between 50 and 200°C/Ma) associated to final exhumation afterthe Oligo-Miocene thermal event affecting these units at shallowdepths (10 km). Low-temperature data suggest that Ceuta and CaboNegro units cooled at surface temperatures before Beni Bousera ones.Since the end of Burdigalian, the Rif internal zones vertical movementsdid not exceed 1km, even during the Messinian Salinity. AFT and AHeages in the whole Sebtides are also slightly older than these obtainedin their Spanish equivalent (Alpujarrides). The Gibraltar arc is dividedinto several independent crustal blocks separated by major fault zonesperpendicular to the coast that could have induced independent verticalmovements during the entire Neogene
24 ème Réunion des sciences de la Terre 2014
Pau, France

insu-01080768
https://hal-insu.archives-ouvertes.fr/insu-01080768

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The NW-trending Talas-Ferghana Fault (TFF) in Kyrgyzstan, Central Asia, is one of the largest intracontinental strike-slip faults in the world. It extends over a distance of more than 2000 km from southern Tourghai to western Tarim and exhibits a maximum dextral offset of ∼200 km during the late Palaeozoic to present. The history of the fault provides important insights for the understanding of the evolution of southern Central Asia but remains poorly constrained due to lack of reliable geochronological data. We present new Ar-Ar ages and structural data from the Kyrgyz West Tianshan, that elucidate the kinematic history of the TFF in the Palaeozoic and Mesozoic. 40Ar/39Ar ages on mylonitic white micas document a deformational history consisting of several episodes. A late Carboniferous age of 312 ± 4 Ma point to initiation of top-to-the-south and dextral transpressional deformation during a metamorphic overprint in Precambrian and Palaeozoic rocks along the northern compartment of the TFF. The main phase of dextral motion along the entire fault occurred in the Permian as suggested by minimum ages of 260-290 Ma obtained at two different locations in the NW and central parts of the TFF. Partial isotopic resetting occurred between 240 and 210 Ma and younger ages of <200-210 Ma are ascribed to late brittle reactivation and hydrothermal fluid flow in the Late Triassic to Early Jurassic times. The Jurassic trans-tensional phase is featured by emplacement of 195 ± 3 Ma pegmatitic dykes. The Ar-Ar mineral ages and structural data argue for a major phase of dextral shearing, affecting the entire region from the West Tianshan to Mongolia in the late Permian and leading to formation of almost equally spaced major NW-trending dextral strike-slip faults. The uniform character of this deformation indicates that the process of amalgamation in this part of the CAOB ended prior to the late Permian, and Central Asia evolved as a single coherent continental block since that time.
ISSN: 0743-9547

hal-00831326
https://hal.archives-ouvertes.fr/hal-00831326
DOI : 10.1016/j.jseaes.2013.02.012

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Plio-Pleistocene diatomitic sequences in the Shamb paleo-lake (South Armenia, Lesser Caucasus) offer a rare opportunity to give new insights on the paleo-climate of Western Asia. We present an integrated palynological, 40Ar/39Ar geochronologic and magnetostratigraphic study for the most complete section in the sedimentary deposits of the Shamb paleo-lake. 40Ar/39Ar dating of two volcaniclastic layers provided ages of 1.24 ± 0.03 and 1.16 ± 0.02 Ma (2. Magnetostratigraphic data show that the entire Shamb section is of reversed polarity which, combined with 40Ar/39Ar dating, suggests that the entire section correlates with part of the Matuyama period (1.785-1.070 Ma). Pollen assemblages and macroremains diversity clearly show an alternation of glacial and interglacial phases. Age calibrations and accumulation rate extrapolation allow a direct correlation of climate changes with the global isotopic curve, and show that the Shamb section probably ranges from approximately 1.300 to 1.080 Ma (marine isotopic stages 40 to 31). The vegetation of the Lesser Caucasus developed in a mosaic pattern in a Pleistocene continental, mostly arid climate, comparable to the present-day climate. The observed vegetation changes record a dominant climate response to the obliquity orbital parameter, but the influence of precession could not be established from the Shamb data. Pollen and macroflora both indicate that glacial periods were cold and dry and that interglacials were warm with local humidity. The early Pleistocene climatic model for Western Asia is thus similar to the climatic model for the Mediterranean area.
ISSN: 0012-821X

hal-00470353
https://hal.archives-ouvertes.fr/hal-00470353
DOI : 10.1016/j.epsl.2010.01.007

Éditeur(s) : HAL CCSD Elsevier Masson
Résumé : Extension fractures of two types defined by the mean stress σ were generated in a synthetic rock analogue material. When σ is very small, the fractures are mode I cracks with smooth surfaces. At higher σ, these surfaces have plumose topography, with the amplitude increasing with σ. Both SEM observations and mechanical measurements show that fractures/discontinuities in the latter case are initiated as dilatancy localization bands. They form under tensile or slightly compressive normal stress and can be seen as running constitutive instabilities. The similarity between the plumose fractography of the experimental fractures and natural joints suggests similarity in the formation mechanism.
ISSN: 1631-0721

hal-00585886
https://hal.archives-ouvertes.fr/hal-00585886
DOI : 10.1016/j.crme.2011.01.002

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
A dense, local network of 30 geodetic markers covering a 50 × 60 km2 area in the southwestern European Alps (Briançon region) has been temporarily surveyed in 1996, 2006 and 2011 by GPS. The aim is to measure the current deformation in this seismically active area. The study zone is characterized by a majority of extensional and dextral focal mechanisms, along north–south to N160 oriented faults. The combined analysis of the three measurement campaigns over 15 years and up to 16 years of permanent GPS data from the French RENAG network now enables to assess horizontal velocities below 1 mm/year within the local network. The long observation interval and the redundancy of the dense campaign network measurement help to constrain a significant local deformation pattern in the Briançon region, yielding an average E–W extension of 16 ± 11 nanostrain/year. We compare the geodetic deformation field to the seismic deformation rate cumulated over 37 years, and obtain good coherencies both in amplitude and direction. Moreover, the horizontal deformation localized in the Briançon region represents a major part of the Adriatic-European relative plate motion. However, the average uplift of the network in an extensional setting needs the presence of buoyancy forces in addition to plate tectonics.
ISSN: 0264-3707

hal-01119724
https://hal.archives-ouvertes.fr/hal-01119724
DOI : 10.1016/j.jog.2015.02.001

Éditeur(s) : HAL CCSD
Résumé : International audience
Experimental, and Numerical Studies of Deformation Localization Bands
EOS

hal-00667412
https://hal.archives-ouvertes.fr/hal-00667412

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We analyze in this study a new set of marine data including 3D local tomography, 1992-2008 relocated earthquakes and two recent multichannel seismic lines to characterize the deformation style in the collision area offshore east Taiwan. We have mapped in detail the Mohos of the converging plates as well as the subduction interface with a resolution never reached before. We show that the sharp continental subduction of the Eurasia plate, beneath the middle part of the Central Range, indents the Philippine Sea plate (PSP) as attested by intra-oceanic slicing and incipient subduction of the PSP beneath the east coast of Taiwan. The westernmost part of the PSP slab is probably experiencing a beginning of break-off as attested by NW-trending en-échelon shear zones beneath the southern slope of the southern Ryukyu arc (SRA). These en-échelon shear zones have a sinistral component favored by the "collision-free" subduction of the PSP north of 24°30′N. The down-faulting of the subduction interface forms ramps along which earthquakes clusterize. Three M7 subduction earthquakes occurred offshore Suao city along these ramps with a recurrence interval of about 40 years: 1920 Mw7.7, 1963 Mw7.2 and 2002 Mw7.1 events. The 1966 Mw6.0-7.5 earthquakes sequence likely outlines a WNW-ESE left-lateral intra-slab shear zone. The SRA upper plate accommodates the complex geometry and deformation of the subducting PSP through seismic deformation. Shallow high velocities fringing the Luzon volcanic arc (LVA) beneath the Longitudinal Valley and north of the southernmost Ryukyu forearc basins are interpreted as relics of the LVA forearc basement squeezed in the collision zone. Based on the accommodation of a large part of the convergence through shortening within the PSP and the subsequent segmentation of the shallow subduction interface, we consider that the nucleation of a Mw ≥ 8 earthquake along the southernmost Ryukyu megathrust is unlikely.
ISSN: 0040-1951

hal-00853365
https://hal.archives-ouvertes.fr/hal-00853365
https://hal.archives-ouvertes.fr/hal-00853365/document
https://hal.archives-ouvertes.fr/hal-00853365/file/publallemandifremer.pdf
DOI : 10.1016/j.tecto.2013.03.020

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Both oedometric and plane-strain tests were performed with parallelepipedic samples made of synthetic granular, cohesive, frictional and dilatant rock analogue material GRAM2. For the first time parallel sets of fractures that have all the characteristics of natural joints were reproduced in the laboratory. The fractures are regularly spaced, normal to σ3, and have plumose morphology very similar to that of natural joints. These fractures can form at tensile stress σ3 much smaller in magnitude than the tensile strength of material and even at slightly compressive σ3. When mean stress σ exceeds a certain value, the fractures become oblique to σ1 (the obliquity increases with σ), forming networks of conjugate shear bands/fractures. These results of plane-strain experiments are in good agreement with those of better controlled conventional axisymmetric tests on a similar material in Chemenda et al. (2011b) and are closer to real geological situations. Both types of experiments are complementary. Their results lead to the conclusion that at least certain categories of natural fractures (including joints, and conjugate shear fractures/bands) were initiated as deformation localization bands. The band orientation is defined by the constitutive properties/parameters (notably the dilatancy factor) that are sensitive to σ.
ISSN: 0040-1951

hal-00795555
https://hal.archives-ouvertes.fr/hal-00795555
DOI : 10.1016/j.tecto.2011.11.021

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Absolute earthquake hypocenter locations have been determined in the area offshore eastern Taiwan, at the Southernmost Ryukyu subduction zone. Location process is run within a 3D velocity model by combining the Taiwanese and neighboring Japanese networks and using the 3D MAXI technique. The study focuses on the most active seismic cluster in the Taiwan region that occurs in the forearc domain offshore eastern Taiwan. Earthquakes distribute mainly along 2 active planes. The first one aligns along the subduction interface and the second one, shallower affects the overriding margin. Focal mechanisms within the shallow group indicate that nodal planes are either compatible with high-angle back-thrusts or low-angle thrusts. The active seismic deformation exclusively indicates reverse faulting revealing that the forearc basement undergoes trench-perpendicular strong compression. By integrating the seismological image into the regional context, we favor the hypothesis in which the dense seismicity occurring offshore marks the activity of en-échelon high-angle reverse faults accommodating the uplift of a broken piece of Ryukyu Arc basement, called Hoping Basement Rise. The uplift is inferred to be caused by the subduction of an oceanic relief, either exotic block, seamount or oceanic crust sliver. Our favored solution satisfies the narrowness of epicenter's cluster along the Hoping Canyon, and the observation of high-angle active faults on seismic lines crossing the area. Furthermore, this solution is compatible with the active uplift of the Hoping Rise demonstrated from morphological and sedimentological data. We do not exclude the branching of the high-angle reverse faults system onto a splay fault connected with the subduction interface but further investigations are needed to map precisely the 3D distribution of active faults that break the margin.
ISSN: 0040-1951

hal-00407726
https://hal.archives-ouvertes.fr/hal-00407726
DOI : 10.1016/j.tecto.2007.11.018

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
During the last decade, the interaction of deep processes in the lithosphere and mantle with surface processes (erosion, climate, sea-level, subsidence, glacio-isostatic readjustment) has been the subject of heated discussion. The use of a multidisciplinary approach linking geology, geophysics, geodesy, modelling, and geotechnology has led to the awareness of coupled deep and surface processes. Deep earth dynamics (topography, erosion, tectonics) are strongly connected to natural hazards such as earthquakes, landslides, and tsunamis; sedimentary mass transfers have important consequences on isostatic movements and on georesources, geothermal energy repartitions. The ability to read and understand the link between deep Earth dynamics and surface processes has therefore important societal impacts. Ground-truthing at carefully-selected sites of investigation is imperative to better understand these connections.Due to its youth (<30 Ma) and its subsidence history, the almost land-locked Gulf of Lion–Sardinia continental margins system provides a unique record of sedimentary deposition from the Miocene to present. Due to its high subsidence rate, palaeoclimatic variations, tectonic events and vertical evolution are all recorded here at very high resolution. The late Miocene isolation and desiccation of the Mediterranean, the youngest and most catastrophic event, the Messinian Salinity Crisis (MSC), induced drastic changes in marine environments: widespread deposition of evaporite (gypsum, anhydrite and halite) in the central basin, and intense subaerial erosion along its periphery. These extraordinary mass transfers from land to sea induced strong isostatic re-adjustments that are archived in the sedimentary record and represent a window to the lithospheric rheology and the deep processes.The GOLD (Gulf of Lion Drilling) project, proposes to explore this unique sedimentary record as well as the nature of the deep crustal structure, providing valuable information about the mechanisms underlying vertical motions in basins and their margins.
ISSN: 0264-8172

insu-01197393
https://hal-insu.archives-ouvertes.fr/insu-01197393
https://hal-insu.archives-ouvertes.fr/insu-01197393/document
https://hal-insu.archives-ouvertes.fr/insu-01197393/file/Rabineau%20et%20al.-final-MPG2014_REVISED-FINAL-No-Marked_FINAL%2BFigures.pdf
DOI : 10.1016/j.marpetgeo.2015.03.018

Éditeur(s) : HAL CCSD
Résumé : International audience
Geophysical Research Abstracts
Wien, Austria

hal-00417298
https://hal.archives-ouvertes.fr/hal-00417298

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
Fractures or discontinuities perpendicular to the least stress σ3 were generated in a synthetic rock analogue (granular, frictional, cohesive, and dilatant) material in axisymmetric extension tests. These fractures are of two types defined by the mean stress σ. When σ is very small, the fractures form through the mode I cracking at tensile σ3 equal to the material tensile strength. The fracture walls have smooth surfaces. At higher σ, these surfaces become rougher, with the topography features forming faint or delicate plumose patterns. The amplitude of the plumose topography increases with σ. The axial stress σ3 at fracturing reduces in magnitude and changes in sign with the σ increase. Thus σ3 orthogonal discontinuities can form at compressive σ3. SEM observations show that these discontinuities are deformation localization bands where the material is characterized by the heterogeneous decohesion and volume and porosity increase due to dilatancy. The band thickness is several grain sizes. At formation, the bands are not opened, so they are not mode I fractures. They become fractures with plumose fractography after the separation of the sample parts along the band. The formation mechanism of these discontinuities or fractures is not completely clear, but it is suggested that it represents a running constitutive instability in the form of dilatancy banding (with further σ increase the bands become inclined to σ1, i.e., shear). The similarity between the experimentally generated plumose surface fractures and natural joints is discussed, and it is suggested that they can be formed as propagating constitutive instabilities.
ISSN: 0148-0227

hal-00585846
https://hal.archives-ouvertes.fr/hal-00585846
DOI : 10.1029/2010JB008104

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We use 36Cl surface exposure dating to determine the slip release pattern over the last ~ 15 kyr for the Velino-Magnola fault, a major active normal fault in Central Italy. We sampled the fault at five well-separated sites along its length, and modeled the 36Cl concentrations measured in the 376 samples. We find that the fault broke in at least 9 large earthquakes that occurred in two 5-6 ka-long supercycles. Each cycle included a 4-5 ka-long phase of relative quiescence, followed by a cluster of at least 3 large earthquakes or earthquake sequences that released most of the accumulated strain in ~ 1 ka. All 9 identified events broke the entire fault and produced maximum surface slips of 2-3 m. Though the Velino-Magnola fault seems presently in a stage of relative quiescence, it may re-enter a phase of paroxysmal seismic activity in a few hundred of years
ISSN: 0012-821X

hal-00667280
https://hal.archives-ouvertes.fr/hal-00667280
DOI : 10.1016/j.epsl.2011.05.022

Éditeur(s) : HAL CCSD Wiley
Résumé : International audience
In this paper we investigate finite-frequency effects in crustal tomography. We developed an inversion procedure based on an exact numerical computation of the sensitivity kernels. In this approach we compute the 3D travel-time sensitivity kernels by using (1) graph theory and an additional bending to estimate accurately both rays and travel-times between source/receiver and diffraction points and (2) paraxial ray theory to estimate the amplitude along theses rays. We invert both the velocity and the hypocentre parameters, using these so-called banana-doughnut kernels and the LSQR iterative solver. We compare the ray-theoretical and the finite-frequency tomography to image the intermediate structures beneath the Gulf of Corinth (Greece), which has long been recognized as the most active continental rifting zone in the Mediterranean region. Our dataset consists of 451 local events with 9233 P- firstarrival times recorded in the western part of the Gulf (Aigion area) in the framework of the 3F-Corinth European project. Previous tomographic images showed a complex velocity crustal model and a low-dip surface that may accommodate the deformation. Accurate velocity models will help to better constrain the rifting process, which is still a subject of debate. The main results of this study show that finite-frequency tomography improves crustal tomographic images by providing better resolved images of the 3D complicated velocity structure. Because the kernels spread the information over a volume, finite-frequency tomography results in a sharpening of layer boundaries as we observed for the shallower part of the crust (down to 5 km depth) beneath the Gulf of Corinth.
ISSN: 0016-8025

insu-00354702
https://hal-insu.archives-ouvertes.fr/insu-00354702
DOI : 10.1111/j.1365-2478.2007.00683.x

Éditeur(s) : HAL CCSD Geological Society of America
Résumé : In Gobi Altay and Altay, Mongolia, several flat surfaces, worn through basement rocks and uplifted during the ongoing tectonic episode to a similar altitude of 4000 m, suggests disruption of a single large-scale surface. New thermochronology and field data show that the plateau surfaces represent uplifted parts of an ancient peneplain that formed during Jurassic time. The Gobi Altay and Altay flattopped massifs are tectonically and geomorphologically unique. Their preservation for ~150 m.y. implies that no further tectonic movements occurred before the onset of the last deformation episode, 5 ± 3 m.y. ago. It also suggests that very low erosion rates were maintained by a dry climate over millions of years.
ISSN: 0091-7613

hal-00406436
https://hal.archives-ouvertes.fr/hal-00406436
DOI : 10.1130/G23758A.1

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
The strike-slip faults of north Tibet accommodate part of the Cenozoic convergence between India and Asia. Along the Karakax valley south of Yecheng and near the Xidatan trough south of Golmud, the active traces of the Altyn-Tagh and Kunlun faults follow narrow belts of metamorphic rocks. The deformation recorded in those mylonites is sinistral strike-slip. Rb/Sr and 40Ar/39Ar ages of deformation from syntectonic fabrics formed at 350–400°C 120 Ma. Argon loss suggests that deformation was associated to a 250–300°C thermal pulse that lasted 5–20 Ma after the onset of movement. Unroofing occurred much later, around 25 Ma when sudden cooling suggests a component of thrusting or more likely normal faulting. The Cretaceous shear may be related to collision between the Qiantang and the Lhasa blocks. The Karakax and Xidatan shear zones may have formed a unique, continuous boundary in the Cretaceous, which was later reused by the Tertiary strike-slip faults, leading to potentially calculable offsets along the Altyn-Tagh fault.
ISSN: 2169-9313

hal-00197562
https://hal.archives-ouvertes.fr/hal-00197562
https://hal.archives-ouvertes.fr/hal-00197562/document
https://hal.archives-ouvertes.fr/hal-00197562/file/Arnaud_JGR000904_def.pdf
DOI : 10.1029/2001JB000904

Éditeur(s) : HAL CCSD Société géologique de France
Résumé : International audience
This special issue includes papers covering various topics of importance in the Caribbean such as geodynamics, environmental evolutions and natural hazards (fig. 1). This collection of articles focuses in particular on geodynamic processes occurring along the Caribbean plate boundaries, on volcanic hazards and on flooding. Given the recently increased societal importance of these subjects, we hope that the regional geological community and the local policy makers and government officials of the Caribbean countries will find this a timely and valuable update regarding research advances on these topics. We decided to publish this issue following the Caribbean Geological Conference, which has been held every 3 years since 1955 and took place in Guadeloupe for its 19th meeting from the 21st to the 24th of March 2011.
EISSN: 1777-5817

hal-00830337
https://hal.archives-ouvertes.fr/hal-00830337
DOI : 10.2113/gssgfbull.184.1-2.3