Éditeur(s) : HAL CCSD Ocean Drilling Programm
Résumé : This paper provides a summary of postcruise scientific results from Ocean Drilling Program (ODP) Leg 209 available to date, building upon shipboard observations and syntheses summarized in the Leg 209 Initial Results volume. During Leg 209, 19 holes were drilled at 8 sites along the Mid-Atlantic Ridge from 14°43´ to 15°44´N, mainly in residual mantle peridotite intruded by gabbroic rocks, in order to understand the tectonic and structural processes responsible for formation of oceanic lithosphere with abundant residual peridotite exposed on the seafloor coupled with a relatively low proportion of volcanic rocks. Based on proportions of recovered lithologies, the entire area may be underlain by mantle peridotite with ~20%–40% gabbroic intrusions and impregnations. Impregnated peridotites with olivine + two pyroxenes + plagioclase + spinel that apparently formed in equilibrium probably record crystallization from primitive mid-ocean-ridge basalt at pressures of 0.5–0.6 GPa. Metamorphic equilibria record isobaric cooling to ~1100°C at this pressure. Thus, the conductively cooled thermal boundary layer beneath the Mid-Atlantic Ridge in this region is >15 km thick. Combined crystallization and reaction with residual peridotite formed a series of impregnated peridotites recording increasing Na content at nearly constant Mg#; this process could explain some of the variation in fractionation-corrected Na (e.g., Na = 8.0) observed in mid-ocean-ridge basalts. Clinopyroxene textures and compositions record such impregnation processes, and they are particularly well documented for Site 1274. Other Leg 209 gabbroic rocks formed from extensive crystallization of highly evolved melts, indicating that a substantial proportion of melt entering the thermal boundary layer crystallizes entirely beneath the seafloor, with no volcanic equivalent. Alteration of peridotites occurred over a range of temperatures and is the result of three distinct processes: rock-dominated serpentinization with formation of brucite in olivine-rich lithologies, fluid-dominated serpentinization with formation of magnetite and no brucite, and fluid-dominated talc alteration with addition of SiO2 as well as H2O and oxygen. The latter two processes also exhibit detectable trace element metasomatism that is distinct in its character from the igneous impregnation described in the previous paragraph. Microstructures show that most residual peridotites were not ductilely deformed at temperatures less than ~1200°C. Structural and paleomagnetic data require tectonic rotations of relatively undeformed blocks; some rotations probably exceeded 60° around nearly horizontal axes parallel to the rift axis. Rotations occurred along several generations of high-temperature mylonitic shear zones extending deeper than 15 km depth and numerous faults at lower temperature. Early formed shear zones and faults were passively rotated around later features; such a process could have produced low-angle fault surfaces without slip on low-angle faults. This region provides end-member examples of processes that are common at many or most slow-spreading ridges. Osmium isotope ratios indicate an ancient history of depletion for residual peridotites from the 14°–16°N region along the Mid-Atlantic Ridge. Though depleted Os isotope ratios in peridotite have been reported elsewhere along the global ridge system, the values from this region are among the most depleted. In general, Os isotope ratios from mid-ocean-ridge basalts are systematically more radiogenic than Os isotope ratios from ridge peridotite samples, suggesting a polygenetic heterogeneous source for mid-ocean-ridge basalts. Geochemical studies of zircons from Leg 209 gabbroic rocks and impregnated peridotites, together with other ridge and arc-related zircons, indicate that ridge zircons have systematically lower fractionation-corrected U and Th concentrations compared to arc zircons. This observation provides a tool for interpreting the tectonic provenance of ancient detrital zircons and indicates an arclike provenance for Hadean detrital zircons. Geobiological studies and aerobiological studies were also undertaken during Leg 209. The geobiological work found no measurable microbial enhancement of olivine dissolution rate, possibly because the samples from Leg 209 were sterile. The aerobiological study determined that dust from North Africa, collected from the derrick of the JOIDES Resolution during Leg 209, contains a variety of abundant microorganisms.
Proceedings ODP, scientific results, 209

hal-00407966
https://hal.archives-ouvertes.fr/hal-00407966
DOI : 10.2973/odp.proc.sr.209.001.2007

Résumé : In the beginning, the coastal fleet of the Bigouden region fished by trawling and was completely focused on exploiting lobster and hake. It is a traditional business that expanded between the last war and the 70s, reaching its peak between 1975 and 1980. The best image to give an idea of this fleet is that of a "bucket waterwheel" endlessly discharging its catch in the four ports of the Guilvinec district. Where there is a seafaring business in Guilvinec, Loctudy and Saint-Guénolé, there is a complementarity that is expressed in two ways: - coastal fishing constitutes a very noticeable and regular supplement to production, since sales happen daily and only bad winter weather causes a relative decrease in the supplement. - coastal fishing gives a flattering image of the port based on the display of high-quality leading market products: daily live lobster, hake and angler. In this study, we have above all tried to evaluate the situation of the Bigouden coastal system as an entity, while including in the same analysis the species, fleets and the exploitation of the resource. For the main species, a balance sheet is proposed. It covers the lobster, hake and angler separately. Lobster, because of its small amount of movement, can be considered as being an isolated stock, while fish belong to much more wide-ranging groups. The lobster has gained from various increases in meshing that have been imposed since 1971, even if these have not always been strictly applied. One of the results of this management by means of meshing is a "depreciation" of the variations of daily yields around an average value of 100kg. For the hake, the dominant trait is an increase in yields in the last few years in accordance with an improvement of the situation in the Gulf of Gascony due to a generalised decrease of effort and a modification of the exploitation profile since the appearance of boulters and straight nets. Whereas the situation for lobster fisheries, as regards the hake's marketable size, did not improve, since the demand for small hake still exists, we have nonetheless been witnessing for about ten years a slow diversification of the fleets' business activities, which is much more in line with sequential hake fisheries' logical outline of exploitation. When lobster yields decrease, one part of the fleet focuses on the fish at the edges of the lobster fisheries. For the angler, we see rather similar phenomena and a significant increase in unloading of the two species by lobster fishermen due also to a widening of their fishing areas. On the lobster mudflats themselves, there is no notable change in exploitation in the historical records. All studies of coastal fishing always come up against the problem of acquiring statistical data and the Bigouden region is no exception to the rule. To improve this situation, in 1987 and 1988 two items were chosen: - a better awareness of the activity and of the areas frequented, by survey during unloading in Guilvinec and in Loctudy. - a detailed description of the haul by species, by sampling, in Loctudy, on two-thirds of coastal sales, between December 1987 and November 1988. For this reason, analysis of fleets by type is still cursory and covers only one year. The appearance of new trends towards fish can only be described qualitatively, since there is no historical record. The classification of boats was done by analysing data furnished by the auctions. This first assessment is not necessarily reliable, above all because of the auctions' inaccurate description of the hauls, a deficiency that we have tried to overcome by surveying in Loctudy. In conclusion, we are witnessing in the Bigouden region, as in other entities, a rebalancing between traditional business activities and modern trends. Lobster fishing, almost exclusive before the 1980s, is tending to decrease for two main reasons: - a generalised decrease in activity in the lobster fisheries due to non-renewal of coastal fish fleets, - The transfer of part of the lobster fishermen's activities to fish, since the lobster and its accompanying catch no longer seemed able to insure the economic viability of new ships. Other maritime districts resolved their lobster problem in a different way. The Lorient fishermen improved their yields by using more capable trawlers, the fishermen of Sable by exploiting the hake fish run to the fullest and limiting their lobster fishing to the best season. The Bigouden region is slowly turning to the second solution, as it renews its fleet.
A ses origines, la flottille côtière du pays bigouden péchant au chalut, est tout entière orientée vers l'exploitation de la langoustine et du merlu. Il s'agit d'une activité traditionnelle qui s' amplifie entre la dernière guerre et les années 70 pour atteindre son apogée entre 1975 et 1980. La meilleure image que l'on puisse donner de cette flottille est celle d'une "noria" débarquant inlassablement sa capture dans les quatre ports du quartier du Guilvinec. Là où existe une activité hauturière à Guilvinec, Loctudy et Saint-Guénolé, il y a une complémentarité qui s'exprime de deux manières : - la pêche côtière constitue un appoint très appréciable et régulier de production, puisque la vente est quotidienne et que seules les intempéries hivernales entraînent une baisse relative des apports. - la pêche côtière donne du port une image flatteuse basée sur la présentation de produits d'appel de grande qualité : langoustine vivante, merlu et baudroies quotidiens. Dans cette étude, nous avons surtout tenté de faire le point sur le système côtier bigouden en tant qu'entité, en englobant dans la même analyse des espèces, les flottilles et l'exploitation de la ressource. Pour les espèces principales, un bilan est proposé. Il couvre séparément la langoustine, le merlu et les baudroies. La langoustine, en raison de ses faibles déplacements, peut être considérée comme constituant un stock isolé, alors que les poissons appartiennent à des ensembles beaucoup plus vastes. La langoustine a beaucoup gagné des diverses augmentations de maillage qui ont été imposées depuis 1971, même si elles n'ont pas toujours été appliquées avec rigueur. Un des résultats de cette gestion par les maillages est un "amortissement" des variations des rendements journaliers autour d'une valeur moyenne de 100 kg. Pour le merlu, le trait dominant est une augmentation des rendements dans les dernières années en accord avec une amélioration de la situation dans le Golfe de Gascogne due à une baisse généralisée de l'effort et à une modification du profil d'exploitation depuis l'apparition des palangriers et des filets droits. Si la situation sur les pêcheries de langoustine, au regard de la taille marchande du merlu, ne s'est pas améliorée puisque la demande de petits merluchons existe toujours, on assiste par contre depuis une dizaine d'années à une diversification lente des activités des flottilles entrant beaucoup mieux dans le schéma logique d'exploitation des pêcheries séquentielles de merlu. Quand les rendements en langoustine baissent, une partie de la flottille s'oriente vers les poisson sur les marges des pêcheries de langoustine. Pour les baudroies on observe des phénomènes assez analogues et une augmentation importante des débarquements des deux espèces par les langoustiniers due également à un élargissement de leurs zones de pêche. Sur les vasières à langoustine elles-mêmes, il n'y a pas de modification notable de l'exploitation dans la série historique. Toute étude des pêches côtières se heurte toujours au problème d'acquisition des données statistiques et le pays bigouden n'échappe pas à la règle. Pour améliorer cette situation, en 1987 et 1988, deux points ont été retenus : - une meilleure connaissance de l'effort et des zones fréquentées, par enquête au moment des débarquements à Guilvinec et à Loctudy, - une description détaillée des apports par espèce, par échantillonnage, à Loctudy, sur les 2/3 des ventes côtières, entre décembre 1987 et novembre 1988. Pour cette raison, l'analyse de flottilles en types est encore sommaire et n'a porté que sur une année. L'apparition des tendances nouvelles vers le poisson ne peut être décrite que qualitativement puisque la série historique n'existe pas. La classification des bateaux a été faite par l'analyse des données fournies par les criées. Ce premier diagnostic ne présente pas toutes les garanties en raison surtout d'une description peu fidèle des apports par les criées, déficience que l'on a essayé de pallier en enquêtant à Loctudy. En conclusion, on assiste dans le pays bigouden comme dans d'autres entités à un rééquilibrage entre les activités traditionnelles et des orientations modernes. La pêche de langoustine, quasi exclusive avant les années 1980, tend à décroître pour deux raisons principales : - une baisse généralisée de l'effort sur les pêcheries de langoustine due au nonrenouvellement des flottilles de pêche côtière, - le report d'une partie de l'effort des langoustiniers vers les pêcheries de poissons, la langoustine et sa capture accessoire ne semblant plus pouvoir assurer la rentabilité économique des navires neufs. D'autres quartiers maritimes ont résolu de façon différente leur problème langoustine. Les Lorientais ont amélioré leurs rendements en adoptant des chaluts plus performants, les Sablais en exploitant à fond la séquence des pêcheries de merlu et en limitant leur intervention sur la langoustine à la saison la plus favorable. Le pays bigouden s'engage lentement dans la seconde solution, au rythme du renouvellement de sa flottille.

Droits : info:eu-repo/semantics/openAccess
http://archimer.ifremer.fr/doc/1989/rapport-2202.pdf
http://archimer.ifremer.fr/doc/00000/2202/

Éditeur(s) : HAL CCSD Société Géologique de France
Résumé : Based on a High-Resolution 3D seismic block acquired in the Gulf of Lion in 2004–2005 we investigated fluid pipes and pockmarks on the top of the interfluve between the Hérault canyon and the Bourcart canyon both created by turbidity currents and gravity flows from the shelf to the deep basin in the north-western Mediterranean Sea. Combining the geometry of the potential fluid pipes with the induced deformation of surrounding sediments leads then to the ability to differentiate between potential fluid sources (root vs source) and to better estimate the triggering mechanisms (allochtonous vs. autochtonous cause). We linked together a set of derived attributes, such as Chaos and RMS amplitude, to a 3D description of pipes along which fluids may migrate. As previously shown in other basins, the induced deformation, creating cone in cone or V-shaped structures, may develop in response to the fluid pipe propagation in unconsolidated sediments in the near surface. The level at the top of a cone structure is diachronous. It means that stratigraphic levels over this surface are deformed at the end of the migration. They collapse forming a depression called a pockmark. These pipes are the result of repeated cycles of fluid expulsion that might be correlated with rapid sea-level rise instead of sediment loading. The most recent event (MIS 2.2 stage) has led to the formation of a pockmark on the modern seafloor. It has been used as a reference for calculating the effect of a rapid sea-level rise on fluid expulsion. As all physical and geometrical parameters are constrained, we were able to define that a + 34 m of sea level rise may account for triggering fluid expulsion from a very shallow silty-sandy layer at 9 m below seafloor since the last glacial stage. This value is consistent with a sea level rise of about 102 m during this period. This study shows that the episodic nature of fluid release resulted from hydromechanical processes during sea-level rise due to the interactivity between high pressure regimes and principal in situ stresses.
ISSN: 0037-9409

hal-01667241
https://hal.archives-ouvertes.fr/hal-01667241
DOI : 10.1051/bsgf/2017190

Éditeur(s) : HAL CCSD Royal Meteorological Society
Résumé : Assessing the impact/adaptation of human activities on/to climate change is a key issue, especially in the tropics that concentrate major anthropogenic dynamics such as deforestation and nearly two-thirds of the planetary rainfall. However, this task is often made tough because human activities such as agricultural dynamics are usually analysed at local or regional scale whereas climate related studies are led at large to global scales due to a lack of reliable data, especially in the tropics. In this article we argue that the increased spatial resolution of remote sensing-based rainfall estimates enables assessing the spatiotemporal variability of rainfall regimes at regional and local scales, thus allowing fine analysis of the interactions with human activities. We processed Tropical Rainfall Measuring Mission (TRMM) 3B42 daily rainfall estimates over the state of Mato Grosso (southern Brazilian Amazon) for the 1998-2012 study period in order to compute rainfall metrics such as annual rainfall and duration, onset and end dates of the rainy season based on the Anomalous Accumulation methodology (at a 0.25◦ spatial resolution). We then crossed these metrics with agricultural maps (produced at a 250m spatial resolution) and proved that the adoption of intensive agricultural practices such as double cropping systems is partly the result of a strategy to adapt practices to local climatic conditions. Finally, we discuss how such results raise important issues regarding the sustainability of the agricultural development model in the Southern Amazon.
International Journal of Climatology

halshs-00910825
https://halshs.archives-ouvertes.fr/halshs-00910825
DOI : 10.1002/joc.3863

Éditeur(s) : Elsevier Science Inc
Résumé : Based on multi-sensor optical remote sensing techniques, more than 80 medium and high spatial resolution satellite images were used for studying the turbidity patterns of Danube Delta waters. During a selected 4-year temporal coverage (2006 to 2009), the turbidity gradients were simultaneously analyzed in the delta plain lakes and in the Black Sea western-northwestern coastal zone. Two distinct, but complementary, methodologies for retrieving turbidity were employed, one for the lakes and the other for the coastal zone. After comparing the turbidity satellite-derived turbidity products with in-situ measurements, the inter-comparability of the products was independently verified. Then, through an integrative analysis, the initial hypothesis of turbidity control by the Danube River inputs was tested in both areas (Delta plain and coastal zone). Seasonal turbidity patterns were identified together with the mechanisms responsible for its important temporal and spatial variability. Reciprocal contributions derived from the association of multi-scale satellite products were highlighted. (C) 2013 Elsevier Inc. All rights reserved.
Remote Sensing Of Environment (0034-4257) (Elsevier Science Inc), 2013-05 , Vol. 132 , P. 86-101

Droits : 2013 Elsevier Inc. All rights reserved.
http://archimer.ifremer.fr/doc/00135/24622/23607.pdf
DOI:10.1016/j.rse.2013.01.009
http://archimer.ifremer.fr/doc/00135/24622/

Éditeur(s) : HAL CCSD
Résumé : Given the technological development of embedded satellite sensors, the potential of available satellite images increases so that the question now arises of their most efficient exploitation possible. This is the purpose of the CARTAM-SAT project to fluidize the processing workflow from satellite images to users. The thesis is part of this framework.Processing operations relating to images have evolved over the years. Low-resolution images were processed by a so-called pixel approach while the high-resolution has allowed the development of a so-called object approach. The latter focuses on analysing not about the isolated pixels, but about groups of pixels representative of concrete objects on the ground. Thus, in principle, these are groups of pixels with a domain-specific remote sensing semantics.Along with satellite imagery, knowledge representation has evolved. The standards of representation have benefited from the expansion of the web to give rise to standards like OWL. This one is widely based on description logics that allow the use of automated reasoners able to infer implicit knowledge.This thesis is at the junction of these two sciences and provides an ontological approach for analysing satellite images. The aim is to formalize different types of knowledges and conceptualizations implicitly used by image processing programs and by remote sensing experts, and then reasoning automatically on an image description to obtain one semantic interpretation.This general principle may have numerous technical variations. The implementation consisted in a prototype combining a satellite image analysis library and an ontology-based reasoner. The implementation proposed in the thesis allows to explore four technical variations of the principle that lead to discussions on the complementarity of pixel and object analysis paradigms, the representation of some of the spatial relations and the role of knowledge in relation to processing.
Étant donnée l'évolution technologique des capteurs embarqués à bord des satellites, le potentiel d'images satellitaires accessible s'accroît de telle manière que se pose maintenant la question de son exploitation la plus efficace possible. C'est l'objectif du projet CARTAM-SAT que de fluidifier la chaîne de traitement depuis les satellites jusqu'aux utilisateurs des images. La thèse s'inscrit dans ce cadre. Les traitements relatifs aux images ont évolué au cours des années. Les images basse résolution étaient traitées par une approche dite pixel alors que la haute résolution a permis le développement d'une approche dite objet. Cette dernière s'attache à analyser non plus des pixels isolés, mais des groupes de pixels représentatifs d'objets concrets sur le terrain. Ainsi, en principe, ces groupes de pixels sont dotés d'une sémantique propre au domaine de la télédétection. La représentation des connaissances a évolué parallèlement aux images satellitaires. Les standards de représentation ont profité de l'expansion du web pour donner naissance à des standards comme OWL. Celui-ci repose en grande partie sur les logiques de description qui permettent l'utilisation de raisonneurs automatiques capables d'inférer une connaissance implicite.Cette thèse se place à la jonction de ces deux sciences et propose une approche ontologique d'analyse des images satellitaires. Il s'agit de formaliser différents types de connaissances et de conceptualisations implicitement utilisés par les logiciels de traitement d'image et par les experts en télédétection, puis de raisonner automatiquement sur la description d'une image pour en obtenir une interprétation sémantique.Ce principe général est susceptible de nombreuses déclinaisons techniques. La mise en œuvre a consisté en la réalisation d'un prototype alliant une bibliothèque d'analyse d'images satellitaires et un raisonneur basé sur les ontologies. L'implémentation proposée dans la thèse permet d'explorer quatre déclinaisons techniques du principe qui mènent à des discussions sur la complémentarité des paradigmes d'analyse pixel et objet, la représentation de certaines relations spatiales et la place de la connaissance par rapport aux traitements.
https://tel.archives-ouvertes.fr/tel-00998692

NNT : 2013MON20059
tel-00998692
https://tel.archives-ouvertes.fr/tel-00998692
https://tel.archives-ouvertes.fr/tel-00998692/document

Éditeur(s) : HAL CCSD
Résumé : This paper presents the experimental results obtained for an automatic detection of ships in High Resolution optical satellite images. Our images are panchromatic SPOT 5 images, whose resolution is 5m per pixel. Our detection method is part of an industrial project of maritime surveillance. It is based on the Bayesian decision theory and does not need any preprocessing.The detection is composed of three stages. The first one is a pre-detection of targets that gives us candidates. The second one is a precise segmentation of each candidate. The third one is a classification of candidates into three classes : real small targets, real big targets and false alarms. The two first stages are based on the bayesian theory, using a very simple image model that leads to very fast algorithms. For now, the classification is based on multivariate decision tree. Finally, the overall results of the method are given for a set of images, as close as possible to the operational conditions and show the performances of the proposed method (detection of almost all the ships, false alarms due to crests of waves and an acceptable computing time).
Journée Nationale de Photogrammétrie et Télédétection

hal-00601854
https://hal.archives-ouvertes.fr/hal-00601854

Éditeur(s) : HAL CCSD Lambert Academic Publishing
Résumé : The Himalaya-Tibet system is considered as the classical case of continental collision. Nonetheless, some fundamental questions concerning its structure, as well as physical processes influencing its evolution are still pending. This book presents several advances in the subject matter. Based on new high-resolution geophysical data from the field, combined with robust imaging techniques, the structure of the collision is revealed in detail: the underplating of India beneath half of Tibet, as well as the geometry of the surface along which this happens. Various numerical modelling techniques allow to discuss physical processes at work in the collision zone, such as the rheology of the India plate whose strong mantle supports the Himalayas, or the metamorphic reactions at depth emphasizing the role of water. We recommend this book to Earth Scientists in a broader sense. While specialists in seismology or modelling can thumb technical details, all Readers can get an interdisciplinary overview of mountain building in the Himalayas, with a retrospective outlook on early day explorers and the dawn of some classical geological principles.
https://hal.archives-ouvertes.fr/hal-00854592

ISBN : 978-3838323534
hal-00854592
https://hal.archives-ouvertes.fr/hal-00854592

Éditeur(s) : American Geophysical Union
Résumé : We present four companion digital models of the age, age uncertainty, spreading rates, and spreading asymmetries of the world's ocean basins as geographic and Mercator grids with 2 arc min resolution. The grids include data from all the major ocean basins as well as detailed reconstructions of back-arc basins. The age, spreading rate, and asymmetry at each grid node are determined by linear interpolation between adjacent seafloor isochrons in the direction of spreading. Ages for ocean floor between the oldest identified magnetic anomalies and continental crust are interpolated by geological estimates of the ages of passive continental margin segments. The age uncertainties for grid cells coinciding with marine magnetic anomaly identifications, observed or rotated to their conjugate ridge flanks, are based on the difference between gridded age and observed age. The uncertainties are also a function of the distance of a given grid cell to the nearest age observation and the proximity to fracture zones or other age discontinuities. Asymmetries in crustal accretion appear to be frequently related to asthenospheric flow from mantle plumes to spreading ridges, resulting in ridge jumps toward hot spots. We also use the new age grid to compute global residual basement depth grids from the difference between observed oceanic basement depth and predicted depth using three alternative age-depth relationships. The new set of grids helps to investigate prominent negative depth anomalies, which may be alternatively related to subducted slab material descending in the mantle or to asthenospheric flow. A combination of our digital grids and the associated relative and absolute plate motion model with seismic tomography and mantle convection model outputs represents a valuable set of tools to investigate geodynamic problems.
Geochemistry Geophysics Geosystems - G3 (1525-2027) (American Geophysical Union), 2008-04 , Vol. 9 , P. NIL_18-NIL_36

Droits : 2008 American Geophysical Union
http://archimer.ifremer.fr/doc/2008/publication-3900.pdf
DOI:10.1029/2007GC001743
http://archimer.ifremer.fr/doc/00000/3900/

Éditeur(s) : Wiley InterScience
Résumé : This paper reports on the status and design of the operational remotely operated vehicle Victor 6000, rated for 6000 m depth and of the 3000 m depth autonomous underwater vehicle Asterxx operated by Ifremer the French Institute for Sea Exploitation. Victor 6000 is part of a global system built of subsystems, scientific modules, winch and cable, dead weight and umbilical, positioning subsystem using acoustic ultra short base line (USBL) techniques, and software for data and dive management. In 2005 the system was equipped with a second toolsled dedicated to high resolution mapping of the sea bed, with both acoustical and optical devices. Asterxx, the first autonomous underwater vehicle (AUV) developed by IFREMER, is 4.5 m in length with a diameter of 0.69 m. Depending on the payload, its weight is between 600 and 800 kg in air,with a diving depth of 3000 m. Its cruising speed is between 0.5 and 2.5 ms. The AUV is capable of carrying various payloads for a wide spectrum of applications. The vehicle can cruise up to 100 km. For coastal applications this vehicle is operable by a limited crew potentially from a nonspecialized vessel. Both vehicles are used for oceanography as well as to continually evolve underwater systems to address new scientific challenges.
Journal of Field Robotics (1556-4959) (Wiley InterScience), 2007-06 , Vol. 24 , N. 6 , P. 449-459

Droits : 2007 Wiley InterScience
http://archimer.ifremer.fr/doc/2007/publication-2806.pdf
DOI:10.1002/rob.20195
http://archimer.ifremer.fr/doc/00000/2806/

Éditeur(s) : HAL CCSD
Résumé : The research presented in this thesis aims at determining the possibility of partial or total automatic ship detection in High Resolution optical satellite images. At first, we expose the industrial context of our study, which fixes the constraints in terms of performances and processing time. Then, we present the available satellite data for our study (SPOT 5 panchromatic images of 5m per pixel resolution). Then we detail our approach for ship detection : the first stage is a pre-detection of targets that gives us candidates. The second stage is a precise segmentation of each candidate and the third stage is a classification of candidates. Our pre-detection method is based on the Bayesian decision theory. This pre-detection supplies a set of regions of interests (ROI). Among them, we have ships, but also false alarms due to clouds and to crests of waves. The purpose of the following stage is to eliminate the false alarms and to characterize the pre-detected ships. Then, we detail the method used to segment candidates. It uses active contours and also uses the Bayesian decision theory. After a brief description of the characteristics extracted for the classication of ships, we present the classifier that we used. We complete the ship characterization by presenting two methods of wave ship detection. The first approach uses active contours and the second is based on an a contrario approach. We compare the results of these two approaches. To complete the study and replace it in the industrial and operational context, we present experiments of the complete algorithm on complete images to estimate the performances and the processing time of the whole method.
Les travaux présentés dans cette thèse ont pour but de déterminer la possibilité d'automatiser, partiellement ou totalement, la détection de bateaux à partir d'images satellitaires optiques haute résolution. Nous exposons tout d'abord le contexte industriel dans lequelle s'insère notre étude, qui fixe les contraintes en termes de performances et de temps de traitement. Puis, nous présentons les données satellitaires disponibles dans le cadre de notre étude (images SPOT 5 panchromatique de résolution 5m). Après avoir illustré le contenu des scènes, nous présentons la démarche adoptée pour la détection des navires : une phase de pré-détection suivie d'une étape de segmentation et d'une étape de classification. La méthode de pré-détection utilisée s'appuie sur la théorie bayésienne de la décision. Après avoir présenté le modèle classique, nous discutons du modèle que nous avons utilisé. Cette pré-détection fournit un ensemble de régions d'intérêts. Parmi elles, nous n'avons pas uniquement des bateaux, nous avons également des fausses alarmes dues aux nuages et aux crêtes de vagues. Le but de l'étape suivante est à la fois d'éliminer les fausses alarmes et de caractériser les bateaux pré-détectés. Ensuite, nous détaillons la méthode utilisée pour segmenter les bateaux. Elle s'appuie sur des contours actifs et utilise également la théorie bayésienne de la décision. Après avoir décrit les caractéristiques extraites pour la classification des bateaux, nous présentons le classifieur utilisé. Nous complétons la caractérisation des navires en présentant deux méthodes de détection des sillages différentes des méthodes classiques. La première approche s'appuie sur l'utilisation de contours actifs et la seconde est basée sur une approche a contrario. Nous comparons les résultats des ces deux approches. An de compléter l'étude et se replacer dans le contexte industriel et opérationnel de la thèse, nous présentons des expérimentations de l'ensemble de l'algorithme sur des images complètes pour évaluer les performances et le temps de traitement.
https://tel.archives-ouvertes.fr/tel-00560119

tel-00560119
https://tel.archives-ouvertes.fr/tel-00560119
https://tel.archives-ouvertes.fr/tel-00560119/document
https://tel.archives-ouvertes.fr/tel-00560119/file/These_NadiaProia_Version_Finale.pdf

Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
The association of experimental data showing that the plastic deformation of olivine, the main constituent of the upper mantle, is highly anisotropic and the ubiquitous seismic anisotropy in the upper mantle, which indicates that olivine crystals show coherent orientations over scales of tens to hundreds of kilometers, implies that the long-term deformation in the upper mantle is anisotropic. We propose a multiscale approach, based on a combination of finite element and homogenization techniques, to model the deformation of a lithospheric plate while fully considering the mechanical anisotropy stemming from a strain-induced orientation of olivine crystals in the mantle. This multiscale model explicitly takes into account the evolution of crystal preferred orientations (CPO) of olivine and of the mechanical anisotropy during the deformation. We performed a series of numerical experiments simulating the uniaxial extension of a homogeneous (100% olivine) but anisotropic plate to test the role of the olivine CPO on the plate mechanical behavior and the link between CPO and mechanical anisotropy evolution. Even for this simple solicitation, different orientations and intensity of the initial olivine CPO result in variable plate strengths and deformation regimes. A plate with an initial CPO where the olivine [100] and [010] axes are concentrated at 45 degrees to the extension direction has high resolved shear stresses on the easy (010)[100] and (001)[100] slip systems of olivine. This results in low strength and in deformation by transtension. Plates with an initial CPO where the maximum of [100] axes is parallel or normal to the extension direction show a high initial strength. Isotropic plates have an intermediate behavior. The progressive rotation of olivine [100] axes toward the imposed stretching direction results in hardening in all models, except in those characterized by an initial concentration of olivine [100] axes normal to the imposed extension, in which softening is followed by hardening.
ISSN: 1525-2027

hal-00420063
https://hal.archives-ouvertes.fr/hal-00420063
DOI : 10.1029/2009GC002423

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
Progress in seismic methodology and ambitious large-scale seismic projects are enabling high-resolution imaging of the continental crust. The ability to constrain interpretations of crustal seismic data is based on laboratory measurements on rock samples and calculations of seismic properties. Seismic velocity calculations and their directional dependence are based on the rock microfabric, which consists of mineral aggregate properties including crystallographic preferred orientation (CPO), grain shape and distribution, grain boundary distribution, and misorientation within grains. Single-mineral elastic constants and density are crucial for predicting seismic velocities, preferably at conditions that span the crust. However, high-temperature and high-pressure elastic constant data are not as common as those determined at standard temperature and pressure (STP; atmospheric conditions). Continental crust has a very diverse mineral composition; however, a select number of minerals appear to dominate seismic properties because of their high-volume fraction contribution. Calculations of microfabric-based seismic properties and anisotropy are performed with averaging methods that in their simplest form takes into account the CPO and modal mineral composition, and corresponding single crystal elastic constants. More complex methods can take into account other microstructural characteristics, including the grain shape and distribution of mineral grains and cracks and pores. Dynamic or active wave propagation schemes have recently been developed, which offer a complementary method to existing static averaging methods generally based on the use of the Christoffel equation. A challenge for the geophysics and rock physics communities is the separation of intrinsic factors affecting seismic anisotropy, due to properties of crystals within a rock and apparent sources due to extrinsic factors like cracks, fractures, and alteration. This is of particular importance when trying to deduce crustal composition and the state of deformation from seismic parameters.
ISSN: 8755-1209

Droits : info:eu-repo/semantics/OpenAccess
hal-01685568
https://hal.archives-ouvertes.fr/hal-01685568
https://hal.archives-ouvertes.fr/hal-01685568/document
https://hal.archives-ouvertes.fr/hal-01685568/file/Almqvist_et_al-2017-Reviewssur Geophysics.pdf
DOI : 10.1002/2016RG000552

Éditeur(s) : HAL CCSD Wiley
Résumé : International audience
Bruggemann, J.H. (2016). Phylogenetic relationships within Aglaopheniidae (Cnidaria, Hydrozoa) reveal unexpected generic diversity. — Zoologica Scripta, 45, 103–114. Morphology can be misleading in the representation of phylogenetic relationships, especially in simple organisms like cnidarians and particularly in hydrozoans. These suspension feeders are widely distributed in many marine ecosystems, and the family Aglaopheniidae Marktanner-Turneretscher, 1890 is among the most diverse and visible, especially on tropical coral reefs. The taxonomy of this family is based on morphological characters with emphasis on reproductive structures for the identification of genera. This study is the most comprehensive molecular phylogeny of the Aglaopheniidae to date, including six genera and 38 species, of which 13 were investigated for the first time and sampled on tropical coral reefs throughout the Indo-Pacific region. For newly sampled individuals, we sequenced the 16S rRNA, the nuclear locus comprising the complete ITS1-5.8S rRNA gene-ITS2 and the first intron of the calmodulin nuclear gene. Phylogenetic analyses of the data revealed and confirmed a general polyphyly, or doubtful monophyly, of all sampled genera in tropical regions based on both the mitochondrial and nuclear markers. Our results revealed that several morphological characters used today are unsuited to resolve phylogenetic relationships between species and genera, as well as the high phyletic diversity within this family. Future revision of the classification of this family will require extensive geographic sampling and the use of an integrative approach.
ISSN: 0300-3256

hal-01359414
https://hal.archives-ouvertes.fr/hal-01359414
DOI : 10.1111/zsc.12135

Éditeur(s) : HAL CCSD Springer Verlag (Germany) Springer Verlag
Résumé : Direct numerical simulations of flow through two millimeter-scale rock samples of limestone and sandstone are performed using three diverse fluid dynamic simulators. The resulting steady-state velocity fields are compared in terms of the associated empirical probability density functions (PDFs) and key statistics of the velocity fields. The pore space geometry of each sample is imaged at 5.06−μm voxel size resolution using X-ray microtomography. The samples offer contrasting characteristics in terms of total connected porosity (about 0.31 for the limestone and 0.07 for the sandstone) and are typical of several applications in hydrogeology and petroleum engineering. The three-dimensional fluid velocity fields within the explicit pore spaces are simulated using ANSYS® FLUENT® ANSYS Inc. (2009), EULAG Prusa et al. (Comput. Fluids 37, 1193–1207 2008), and SSTOKES Sarkar et al. (2002). These computational approaches are highly disperse in terms of algorithmic complexity, differ in terms of their governing equations, the adopted numerical methodologies, the enforcement of internal no-slip boundary conditions at the fluid-solid interface, and the computational mesh structure. As metrics of comparison to probe in a statistical sense the internal similarities/differences across sample populations of velocities obtained through the computational systems, we consider (i) integral quantities, such as the Darcy flux and (ii) main statistical moments of local velocity distributions including local correlations between velocity fields. Comparison of simulation results indicates that mutually consistent estimates of the state of flow are obtained in the analyzed samples of natural pore spaces despite the considerable differences associated with the three computational approaches. We note that in the higher porosity limestone sample, the structures of the velocity fields obtained using ANSYS FLUENT and EULAG are more alike than either compared against the results obtained using SSTOKES. In the low-porosity sample, the structures of the velocity fields obtained by EULAG and SSTOKES are more similar than either is to the fields obtained using ANSYS FLUENT. With respect to macroscopic quantities, ANSYS FLUENT and SSTOKES provide similar results in terms of the average vertical velocity for both of the complex microscale geometries considered, while EULAG tends to render the largest velocity values. The influence of the pore space structure on fluid velocity field characteristics is also discussed.
ISSN: 1420-0597

hal-01174152
https://hal.archives-ouvertes.fr/hal-01174152
DOI : 10.1007/s10596-015-9486-7

Résumé : This study aims to integrate the problems associated with port development and related activities in an economic monitoring programme that surveys all the activities associated with the marine environment. The economic monitoring programme in this sector also includes studying coastal spatial planning. This type of study concerns the creation and remodelling of sites that involve investments. We can consider two types of coastal spatial planning: one which integrates port development, tourism, aquaculture and fisheries and one that deals with the marine environment (Abric, 1989). Economic surveys of port development on French coasts supposes that the problem of identifying information sources have been resolved and the sectors and the activities that should be accounted for have been characterised. In what follows, the limits of available information and the problems pertaining to the proposed classification of activities according to statistical nomenclature will be discussed. The absence of structured and localised data is aggravated in certain cases by the rules of confidentiality. In light of these difficulties, the first part of this report is devoted to the inventory of general information sources and to the characterisation of existing data. As information forms the basis of any economic monitoring programme, it is necessary to know where, how and by whom information is processed and the limits that one comes up against. This report does not pretend to be exhaustive given the deadlines and the duration of this study. The second part of this report constitutes a summary of the recent trends discerned in terms of port development, from a legal, as well as economic and financial, point of view. This study should be considered as the first step to establishing a basis for a more in-depth study.
Cette étude a pour but d'intégrer les problèmes d'aménagement portuaire et les activités qui y sont liées dans un suivi conjoncturel de l'ensemble des activités économiques en relation avec le milieu maritime. Le suivi conjoncturel de ce secteur économique passe aussi par l'étude de l'aménagement physique du littoral. Celui-ci concerne la création et le remodelage de sites impliquant des investissements. On peut considérer deux types d'aménagements physiques -l'aménagement du littoral : portuaire, touristique, aquacole, halieutique; -l'aménagement du mineur marin (Abric, 1989). Un suivi conjoncturel de l'aménagement portuaire du littoral français, suppose en préalable la résolution du problème de l'identification des sources d'information et la caractérisation des secteurs et activités en prendre en compte. On verra par la suite les limites de l'information disponible et les problèmes afférents a la classification des activités selon les nomenclatures statistiques proposées. L'absence de données structurées et localisées est aggravée dans certains cas par des règles de confidentialité. Du fait de ces difficultés, la première partie de ce rapport est consacrée au recensement des sources d'information générale et à la caractérisation des données existantes. L'information étant à la base de tout suivi conjoncturel, il convient en effet d'être en mesure de savoir où, par qui et comment elle est traitée et les limites auxquelles on se heurte. Ce rapport ne peut prétendre à l'exhaustivité compte tenu des délais et de la période d'exécution de cette étude. La seconde partie constitue une première synthèse sur les évolutions récentes saisies en termes d'aménagements portuaires, tant d'un point de vue juridique qu'économique et financier. Cette étude est à considérer comme une première étape destinée à poser les bases pour une étude plus approfondie. [OCR NON CONTRÔLE]

Droits : info:eu-repo/semantics/openAccess
http://archimer.ifremer.fr/doc/1992/rapport-4169.pdf
http://archimer.ifremer.fr/doc/00000/4169/

Éditeur(s) : HAL CCSD BioMed Central
Résumé : International audience
ABSTRACT: BACKGROUND: Climate change poses unprecedented challenges, ranging from global and local policy challenges to personal and social action. Heat-related deaths are largely preventable, but interventions for the most vulnerable populations need improvement. Therefore, the prior identification of high risk areas at the community level is required to better inform planning and prevention. We aimed to demonstrate a simple and flexible conceptual framework relying upon satellite thermal data and other digital data with the goal of easily reproducing this framework in a variety of urban configurations. RESULTS: The study area encompasses Rennes, a medium-sized French city. A Landsat ETM + image (60 m resolution) acquired during a localized heatwave (June 2001) was used to estimate land surface temperature (LST) and derive a hazard index. A land-use regression model was performed to predict the LST. Vulnerability was assessed through census data describing four dimensions (socio-economic status, extreme age, population density and building obsolescence). Then, hazard and vulnerability indices were combined to deliver a heatwave health risk index. The LST patterns were quite heterogeneous, reflecting the land cover mosaic inside the city boundary, with hotspots of elevated temperature mainly observed in the city center. A spatial error regression model was highly predictive of the spatial variation in the LST (R2 = 0.87) and was parsimonious. Three land cover descriptors (NDVI, vegetation and water fractions) were negatively linked with the LST. A sensitivity analysis (based on an image acquired on July 2000) yielded similar results. Southern areas exhibited the most vulnerability, although some pockets of higher vulnerability were observed northeast and west of the city. The heatwave health risk map showed evidence of infra-city spatial clustering, with the highest risks observed in a north--south central band. Another sensitivity analysis gave a very high correlation between 2000 and 2001 risk indices (r = 0.98, p < 10-12). CONCLUSIONS: Building on previous work, we developed a reproducible method that can provide guidance for local planners in developing more efficient climate impact adaptations. We recommend, however, using the health risk index together with hazard and vulnerability indices to implement tailored programs because exposure to heat and vulnerability do not require the same prevention strategies.
ISSN: 1476-072X

inserm-00762303
http://www.hal.inserm.fr/inserm-00762303
http://www.hal.inserm.fr/inserm-00762303/document
http://www.hal.inserm.fr/inserm-00762303/file/1476-072X-11-38.pdf
DOI : 10.1186/1476-072X-11-38

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Wallace (1951) and Bott (1959) were the first to introduce the idea that the slip on each fault surface has the same direction and sense as the maximum shear stress resolved on that surface. However, this simplified hypothesis is questionable since fault mechanical interactions may induce slip reorientations. Earlier numerical geomechanical models confirmed that the slickenlines (slip vectors) are not necessarily parallel to the maximum resolved shear stress but are consistent with local stress perturbations. This leads us to ask as to what extent the Wallace and Bott simplifications are reliable as a basis hypothesis for stress inversion from fault slip data. Here, a geomechanical multi-parametric study using a 3D boundary element method, covering (i) fault geometries such as intersected faults or corrugated fault surfaces, (ii) the full range of Andersonian state of stress, (iii) fault friction, (iv) fault fluid pressure, (v) half space effect and (vi), rock properties, is performed in order to understand the effect of each parameter on the misfit angle between geomechanical slip vectors and the resolved shear stresses. It is shown that significant misfit angles can be found under specific configurations invalidating the Wallace and Bott assumptions, even though fault friction tends to minimize the misfit. We therefore conclude that in such cases, stress inversions based on fault slip data should be interpreted with care.
ISSN: 0040-1951

hal-01218418
https://hal.archives-ouvertes.fr/hal-01218418
DOI : 10.1016/j.tecto.2015.06.030

Éditeur(s) : HAL CCSD
Résumé : The heterogeneous nature and sometimes karstified carbonate environments has a direct impact on many environmental issues, such as coastal aquifers affected by saltwater intrusion. At the south of the island of Mallorca (Spain), the Llucmajor carbonate platform offers a privileged site for the study of such intrusions including the experimental site of Campos who meets the intrusion at shallow depth. The characterization of heterogeneous properties passes through a preliminary description of the properties of carbonate reservoirs, including those of the porosity. According to the wide range of sizes of heterogeneities from micrometer to hundreds of meters, the use of multiscale methods is required. This thesis focused on the determination of multiscale porosities from the microporosity to karstic porosity, and of relationships between observation scale changes of these properties. At the micron scale, high-resolution X-ray microtomography allows to extract the microporosity and the microporous network connectivity. At lower resolution (mm), X-ray tomography is also used to study the micro- and macro-porous network at the core scale which is already allocated to number of observations and measurements, including petrophysical. At the borehole scale, the wall images are used to identify the dissolved zones from centimeter macropores to plurimetric karstic cavities. At the larger scale, surface geophysics study the lateral extension of the karsts and heterogeneities. Finally, the porous structure of the studied site is integrated with its wide range of scales into the regional geology of the Llucmajor platform. Thus, the hydrogeophysical observatory set up on the site of Campos to monitor the spreading of salt water in the aquifer is integrated in its geological and petrophysical context, in order to refine the interpretation of its variations of salinity measurements during the time.
La nature hétérogène et parfois karstifiée des milieux carbonatés a un impact direct sur nombre de problématiques environnementales, comme celle des aquifères côtiers affectés par une intrusion d'eau salée. Au sud de l'ile de Majorque (Baléares, Espagne), la plate-forme carbonatée de Llucmajor offre un site privilégié pour l'étude de telles intrusions notamment avec le site expérimental de Campos, qui rencontre l'intrusion à faible profondeur. La caractérisation des propriétés hétérogènes du réservoir passe par une description préalable des propriétés des réservoirs carbonatés et notamment celle de la porosité. Au regard de la large gamme d'échelles d'hétérogénéités allant du micromètre à la centaine de mètre, l'utilisation de méthodes multi-échelles est nécessaire. Ce travail de thèse a porté sur la caractérisation multi-échelle de la porosité, allant de la microporosité à la porosité karstique, et l'établissement de relations entre les changements d'échelles d'observation de ces propriétés. A très petite échelle, la microtomographie haute-résolution à rayons X extrait à l'échelle du micron la microporosité et la connectivité des réseaux microporeux. A plus basse fréquence (celle du mm), la tomographie est également utilisée afin d'étudier le réseau micro- et macroporeux à l'échelle des carottes, à laquelle sont réalisées nombre d'observations et de mesures, notamment pétrophysiques. A l'échelle du puits, les images de paroi permettent d'identifier les zones de dissolution allant des macropores centimétriques aux cavités karstiques plurimétriques. A plus grande échelle, la géophysique de surface permet d'étudier l'extension latérale de ces karsts et hétérogénéités. Enfin, la structure poreuse du site étudié sur cette vaste gamme d'échelles est intégrée à la géologie régionale de la plate-forme de Llucmajor. Ainsi, l'observatoire installé sur le site pour surveiller la propagation de l'eau salée dans l'aquifère a pu être replacé dans son contexte géologique et pétrophysique, afin d'affiner l'interprétation de ses mesures de variations de salinité au cours du temps.
https://tel.archives-ouvertes.fr/tel-00633488

tel-00633488
https://tel.archives-ouvertes.fr/tel-00633488
https://tel.archives-ouvertes.fr/tel-00633488/document
https://tel.archives-ouvertes.fr/tel-00633488/file/TheseHebert.pdf

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
TEM Study of Heavitree quartzite deformed at high temperatures and a pressure of 1.5 GPa with three different preparations: water-added, vacuum dried, and sodium doped show a wide range of dislocation microstructure. The vacuum dried sample has a very heterogeneous dislocation distribution varying from almost no dislocations to very high densities. Dislocation nucleation occurs by cross-slip mechanisms, such as Frank-Read sources and Orowan loops around hard inclusions. Shear bands develop in the basal plane composed of two closely spaced shear planes. Dislocations have straight segments and they are aligned along directions of dense packing, suggesting strong Peierls stress control due to the crystal structure. No voids, bubbles or dislocation walls where observed in the vacuum dried sample. The sodium-doped sample had a homogeneous high dislocation density. The water-added sample has a significantly lower, relatively uniform dislocation density. Bubbles associated with dislocations are seen in every grain. Dislocations were either present in loops around bubbles or as straight dislocations with small bubbles spaced along the dislocation line. Some of the long straight dislocations are aligned parallel to the c-axis. Sub-grains where very frequent, sometimes form cells of about 2 p,m in diameter with straight edges. Analysis of dislocations show 1/3 < a > and [c] dislocations in sub-grain walls and free 1/3 < a > dislocations on prism planes. There is clear evidence for dislocation climb with sub-grain walls, dislocation cells, dislocation junctions and dislocation debris of small loops. The major difference between vacuum dried and water-added samples are the homogeneity of the microstructure and evidence for climb in the water-added sample. Glide is clearly difficult, with a high Peierls stress in the vacuum dried sample as shown by areas of very low and very high dislocation density and the crystallographic control of dislocation line direction. The sodium-doped sample indicates that nucleation was easy by the high homogenous dislocation density, but no climb recovery has taken place. The density is high and the dislocations are strongly interacting causing tangles; no evidence for crystallographic control can be observed at these levels of strain. The activation energy for creep in Heavitree quartzite decreases with inferred water content of the specimens form 185 kJ mol(-1) for vacuum dried to 151 for 0.4 wt% water-added samples. Analysis of diffusion data for oxygen under hydrothermal conditions and inferred diffusion data for the hydrogarnet defect and dislocation velocity suggests activation energies for these processes are similar to the activation energy for the dislocation creep of Heavitree quartzite and other quartz aggregates. For data from the previously published experiments with the highest stress resolution there is a correlation between the A pre-factor in the power law creep equation and the activation energy for creep. It is speculated that the correlation may be due to variable hydrogarnet defect concentrations.
ISSN: 0031-9201

hal-00413112
https://hal.archives-ouvertes.fr/hal-00413112
DOI : 10.1016/j.pepi.2008.07.009