Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Hengshan–Wutaishan area forms part of the Trans-North-China Belt developed in response to the final amalgamation of the North China Craton. The Hengshan–Wutaishan domain and the adjacent Fuping massif constitute the largest and the most representative rock exposure of the belt. A structural study allows us to redefine the lithological and tectonic units that compose the architecture of the Hengshan–Wutaishan domain and to propose that the Trans-North-China Belt was built up through a polyphase tectonic evolution within the period 1900–1800 Ma. The first event (D1) corresponds to the emplacement of lower and upper nappes herein called the Orthogneiss and Volcanites Unit (OVU) and the Low Grade Mafic Unit (LGMU), respectively. The OVU mainly consists of rocks formed in an arc system and metamorphosed under amphibolite facies conditions whereas the LGMU represents oceanic crust rocks with an arc component that underwent greenschist facies metamorphism. The syn-metamorphic D1 deformation is characterized by a NW–SE stretching and mineral lineation with a top-to-the SE sense of shear that corresponds to the sense of nappe motion. U–Th–Pb EPM chemical dating on monazite from three metapelites of the OVU gives isochron ages of 1884 ± 11 Ma, 1886 ± 5 Ma and 1887 ± 4 Ma interpreted as the age of the prograde amphibolite facies metamorphism coeval with nappe stacking during the D1 event. The D2 event corresponds to a widespread crustal melting of the OVU and underlying basement rocks in Hengshan related to the exhumation of deep structures about 20–30 Ma after nappe emplacement. The migmatite contains blocks of retrograded eclogite or HP-granulitic restites, and is characterized by the development of a pervasive foliation and lineation. A late D2 event represents the folding stage of the migmatitic foliation during the completion of a dome. The Orthogneiss and Volcanics Unit and the Low Grade Mafic Unit are unconformably covered by weakly metamorphosed to unmetamorphosed sediments belonging to the Hutuo Supergroup. These rocks were deformed by a ductile D3 event, characterized by a NW–SE trending stretching lineation, south verging folds associated with an axial planar slaty cleavage and an E–W crenulation lineation. Lastly, a left-lateral wrenching along the Zhujiafang Shear Zone separates the northern and southern parts of Hengshan. Our structural study shows that there is no significant difference between the southern part of Hengshan and the lower part of Wutaishan, both areas belong to OVU and show a structural continuity. We suggest that this polyphase deformation developed in response to a north-westward subduction of an old ocean, named the Lüliang Ocean, beneath the Western Block, followed by collision with a micro-continent named the Fuping Block at not, vert, similar1890–1880 Ma.
ISSN: 0301-9268

insu-00151594
https://hal-insu.archives-ouvertes.fr/insu-00151594
https://hal-insu.archives-ouvertes.fr/insu-00151594/document
https://hal-insu.archives-ouvertes.fr/insu-00151594/file/Trap-PrecambrainResearch-2007.pdf
DOI : 10.1016/j.precamres.2007.03.001

Éditeur(s) : HAL CCSD Elsevier Masson
Résumé : International audience
The Qinling–Dabie Belt represents the boundary between the North and South China Blocks (NCB, SCB, respectively), where ultrahigh-pressure (UHP) rocks are widespread. A structural study in eastern Qinling and zircon LA ICPMS dating of the migmatite that form the core of the Central Qinling Unit allows us to argue that continental collision occurred in Silurian, before 400 Ma. In the Late Palaeozoic, from Devonian to Permian, the northern margin of SCB experienced a continental rifting. From Late Permian to Middle Triassic, northward continental subduction of SCB is responsible for the development of a high-pressure metamorphism. The age of the UHP metamorphism remains unsettled yet. A two-time genesis, Early Palaeozoic and Early Triassic, is often preferred, but a single Palaeozoic age followed by a Triassic resetting cannot be ruled out.
ISSN: 1631-0713

Droits : info:eu-repo/semantics/OpenAccess
insu-00191534
https://hal-insu.archives-ouvertes.fr/insu-00191534
https://hal-insu.archives-ouvertes.fr/insu-00191534/document
https://hal-insu.archives-ouvertes.fr/insu-00191534/file/Faure-ComptesRendusGeoscience.pdf
DOI : 10.1016/j.crte.2007.10.007

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Analogue and numerical models have shown that the strength of the lithospheric mantle controls the mode of lithosphere deformation. In extension, the presence or absence of a high strength brittle mantle respectively leads to localized or distributed rifting. However, first order geophysical data question the existence of such a brittle mantle. Here we use 2-D finite-element large strain modelling to quantify the impact of a ductile localizing mantle - instead of brittle - in triggering continental rifting. As a novelty, the mantle rheology considers the effect of grain boundary sliding during strain-induced grain size reduction, which may promote a significant strength drop and subsequent strain localization at low mantle temperature (< 700-800 °C). Our results reveal that such ductile localizing mantle implies varying modes of continental rifting that mainly depend on both the amount of weakening in the ductile mantle and the strength of the lower ductile crust. A medium to strong lower crust implies coupling between the upper crust and ductile localizing mantle, yielding to narrow continental rifting. In contrast, a weak lower crust implies decoupling between the upper crust and ductile localizing mantle, giving rise to a switch from distributed faulting at incipient strain to localized faulting at large strain. Ductile strain localization in the lithospheric mantle is therefore sufficient to trigger continental rifting, although a critical amount of weakening is required. Such ductile localizing mantle provides a relevant geological and mechanical alternative to the brittle mantle. It moreover provides a wider variety of modes of upper crustal faulting that are commonly observed in nature.
ISSN: 0040-1951

Droits : info:eu-repo/semantics/OpenAccess
insu-00924254
https://hal-insu.archives-ouvertes.fr/insu-00924254
https://hal-insu.archives-ouvertes.fr/insu-00924254/document
https://hal-insu.archives-ouvertes.fr/insu-00924254/file/Gueydan_precigout_2014_Tectonophysics.pdf
DOI : 10.1016/j.tecto.2013.11.029

Éditeur(s) : HAL CCSD
Résumé : National audience
Dans la région de Bestiac, en haute-Ariège, une coupe nord-sud d’àpeine plus d’un kilomètre de long centrée sur la zone nord-pyrénéennemétamorphique montre les relations entre le socle anté-alpin (gneissgranulitiques et série paléozoïque) du massif nord-pyrénéen du St Barthélémyet de la zone axiale, et la série mésozoïque constituée principalementde marbres et de brèches carbonatées à éléments de lherzolite,mais aussi du flysch crétacé supérieur.A partir de nouvelles données cartographiques, structurales, métamorphiqueset géochronologiques, nous montrons les modalités de l’extensiondans le socle varisque (comment ’escamoter’ la croûte sans ’trop’l’étirer ?), et comment celle-ci a précédé la mise à la surface du manteauet la formation du complexe bréchique. Ces données nous permettentde caractériser l’importance de l’héritage varisque dans la structurationalpine, mais aussi de poser la question de l’impact des déformations alpinesdans ce qui est considéré comme varisque. Enfin, la restaurationde la coupe nous permet d’aborder la question de la géométrie 3D dusystème au Crétacé, et des rôles respectifs des composantes extensiveset décrochantes.
24 ème Réunion des sciences de la Terre 2014
Pau, France

insu-01080833
https://hal-insu.archives-ouvertes.fr/insu-01080833

Éditeur(s) : HAL CCSD Geological Society of America
Résumé : International audience
We combine surface structural measurements, subsurface seismic imaging, and magneto-stratigraphic dating to retrieve, through geometric modeling, the detailed history of fold growth and sedimentation across the Huerguosi anticline, on the northern Tianshan piedmont, taking advantage of a beautifully exposed section of growth strata. The model assumes a fault-bend folding mechanism, consistent with subsurface fold geometry. The shortening history is obtained by least-squares fitting of the measured dip angles of the growth strata. The shortening rate across the anticline is shown to have been remarkably constant: it increased only slightly from 0.84 ± 0.04 mm/yr between 10 and 4 Ma to 1.14 ± 0.02 mm/yr over the past 4 m.y. This approach also allows correcting syntectonic sedimentation rates for the effect of the fold growth and shows that the sedimentation rates in the piggyback basin increased abruptly from ~0.4 to ~0.7 mm/yr ca. 4 Ma.
ISSN: 0091-7613

insu-00338254
https://hal-insu.archives-ouvertes.fr/insu-00338254
DOI : 10.1130/G25073A.1

Éditeur(s) : HAL CCSD
Résumé : International audience
The Achmmach tin mineralization (NE of theMoroccan Central Massif) is associated with tourmaline-richalteration halos, veins, and faults hosted in sandstones andmetapelites of the Upper Visean-Namurian. These depositsare reported to be late Hercynian in age and related to theemplacement of late-orogenic granite not outcropping in thestudied area. Structural and paragenetic studies of theAchmmach tin deposit were conducted in order to establisha general model of the mineralization. From field constraints,the late Hercynian phase is marked by a transition fromtranspression to extension with deformation conditions evolvingfrom ductile to brittle environments. The transpression(horizontal shortening direction roughly trending E-W) is coevalwith the emplacement of the first tourmaline halos alongseveral conjugated trends (N070, N020, and N120).Thereafter, a tourmaline-rich breccia formed in response tothe fracturing of early tourmaline-altered rocks.Subsequently, during the extensional phase, these structureswere reactivated as normal faults and breccias, allowing theformation of the main tin mineralization (cassiterite) associatedwith a wide variety of sulfides (arsenopyrite, chalcopyrite,sphalerite, galena, pyrrhotite, bismuthinite, pyrite, and stannite). This evolution ends with fluorite and carbonate deposition.The hydrothermal fluid flow velocity, calculated byapplying statistical measures on the tourmaline growth bands,varies with the lithology. Values are lower in metapelites andhigher in breccia. In the general evolution model proposedhere, tourmaline alteration makes the rock more competent,allowing for brittle fracturing and generation of open spacewhere the main Sn mineralization was precipitated.
Mineralium Deposita

insu-01240481
https://hal-insu.archives-ouvertes.fr/insu-01240481
DOI : 10.1007/s00126-015-0613-0

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Tarim and Junggar basins in central Asia are capped by a thick pile of conglomerates, called the Xiyu Formation, that are commonly linked to a change in climate and/or accelerated uplift near the Plio-Pleistocene boundary. In order to better understand their origin and significance, we carried out a combined structural and magnetostratigraphic study in the Quilitage syncline (southern Tianshan), where the base of the Xiyu conglomerates is observed at both sides of the syncline. A balanced cross-section shows that, even at a local-scale, the base of the Xiyu conglomerates cannot be regarded as a single continuous stratigraphic layer. On the southern flank of the Quilitage syncline, we collected 172 samples collected for magnetostratigraphic dating identify 17 polarity chrons that date the new section from 5.2 to ~ 1.7 Ma and constrain the base of the Xiyu conglomerate here at ~ 1.7 Ma. This is 4.2 Ma younger than the age of the Xiyu previously found on the northern limb of the same syncline. Together with other magnetostratigraphic studies carried out around the Tianshan, our study unambiguously demonstrates that the onset of deposition of the Xiyu conglomerates is diachronous, and that the conglomerates are systematically younger toward the basin. Consequently, the Xiyu Formation should not be considered as a chronostratigraphic marker related to any particular tectonic or climatic event, but is instead a prograding gravel wedge that has prograded over the underthrusting forelands. A synthesis of chronologic and structural results yields progradation rates over the last 10 Ma on the order of ~ 2.0 mm/yr and ~ 3.9 mm/yr south and north of the Tianshan Mountains respectively. These rates are comparable to the shortening rate across the Tianshan range, suggesting that underthrusting is the main factor governing the progradation rate of the Xiyu Formation.
ISSN: 0012-821X

insu-00414151
https://hal-insu.archives-ouvertes.fr/insu-00414151
https://hal-insu.archives-ouvertes.fr/insu-00414151/document
https://hal-insu.archives-ouvertes.fr/insu-00414151/file/Charreau-EPSL-2009.pdf
DOI : 10.1016/j.epsl.2009.07.035

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
The current structure of the South Armorican Domain in the French Variscan Belt, provides an excellent record of the late orogenic evolution, as documented by the complex interactions between extensional structures and partial melting. In the Golfe du Morbihan, the South Brittany Migmatite Belt (SBMB), tectonically overlain by non-melted metamorphic units, was studied by combined structural and 40Ar/39Ar methods. The recognition of successive deformation stages points to a strain continuum initiated at depth at the end of a partial melting event, and continued to near-surface brittle faulting, encompassing ductile strain localization over a major top-to-the-ESE extensional shear zone (SSZ) consistent with an overall WNW-ESE orogen-parallel stretching. This multidisciplinary study making the link between structure, texture, microchemistry and 40Ar/39Ar geochronology allow distinguishing between cooling, recrystallization and syn-tectonic crystallization ages. The first extensional insights, witnessed by dyke intrusion were dated at ~319 ± 6 Ma immediately after the SBMB partial melting. Strain localization along the SSZ, occurred until ~302-298 Ma when SBMB crossed the ductile-brittle transition. Moreover, in situ 40Ar/39Ar analysis, of syn-tectonic white micas sampled in the ductile and brittle structures yield similar ~300 Ma. Formation or reactivation of the SSZ may have occurred during the rapid cooling of the SBMB settled at ~305 Ma by conventional 40Ar/39Ar analysis. Large-scale late orogenic extensional event of the previously overthickened Variscan crust thus lasted over ~20 ± 3 Myr in the same extensional tectonic regime guided by the South Armorican Shear Zone.
ISSN: 0278-7407

insu-00628699
https://hal-insu.archives-ouvertes.fr/insu-00628699
https://hal-insu.archives-ouvertes.fr/insu-00628699/document
https://hal-insu.archives-ouvertes.fr/insu-00628699/file/2010TC002788.pdf
DOI : 10.1029/2010TC002788

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The 40Ar/39Ar geochronological technique has significantly contributed to the study of crustal deformation. However, the frequent occurrence of extraneous argon in high-pressure terrains can make the interpretation of 40Ar/39Ar ages problematic. This contribution attempts to: i) characterize the distribution and origin of extraneous argon in the Cycladic Blueschist Unit (CBU, Greece) by applying the 40Ar/39Ar dating technique on three Cycladic islands, Syros, Tinos and Ios, which span a complete transect of the CBU and ii) discuss regional implications for the tectonometamorphic evolution of the CBU. Our results, combined with ages available in the literature, show that periods of peak-burial conditions (55–49 Ma) and syn- (45–38 Ma) to post-orogenic exhumation (37–21 Ma) are well constrained in the CBU by the 40Ar/39Ar method. Moreover, Variscan apparent ages are preserved in the Cycladic basement of Ios, indicating that the 40Ar/39Ar system was not completely reset during the Eocene metamorphic episode. Additionally, our 40Ar/39Ar data show that the occurrence of extraneous argon is heterogeneously distributed in the CBU. While high-pressure rocks of Syros and Tinos are only locally affected, extraneous argon is clearly evidenced in the CBU of Ios, yielding geologically meaningless ages up to 900 Ma. On each island, the most affected ages were obtained in microstructures where fluid circulation is enhanced such as shear bands or strain shadows around garnets. We suggest that the Cycladic Basement, a polymetamorphic continental unit, behaved as an argon reservoir that has been mobilized by fluid circulation at the Eocene. These argon-enriched fluids have then heterogeneously contaminated metamorphic rocks when percolating through the CBU. Finally, we claim that a minimum closure temperature of 550 °C must be accepted for the phengites of the CBU and conclude that volume diffusion is not the main process resetting the argon isotopic system in high-pressure rocks compare to recrystallization enhanced by fluid circulation and deformation.
ISSN: 0024-4937

Droits : http://creativecommons.org/licenses/by-nc-nd/
insu-01424268
https://hal-insu.archives-ouvertes.fr/insu-01424268
https://hal-insu.archives-ouvertes.fr/insu-01424268/document
https://hal-insu.archives-ouvertes.fr/insu-01424268/file/Valentin-Lithos-Accepted-2016.pdf
DOI : 10.1016/j.lithos.2016.12.013