Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Slices of polycyclic metasediments (marbles and meta-cherts) are tectonically amalgamated with the polydeformed basement of the Dent Blanche tectonic system along a major Alpine shear zone in the Western Alps (Becca di Salé area, Valtournenche Valley). A combination of techniques (structural analysis at various scales, metamorphic petrology, geochronology and trace element geochemistry) was applied to determine the age and composition of accessory phases (titanite, allanite and zircon) and their relation to major minerals. The results are used to reconstruct the polyphase structural and metamorphic histories, comprising both pre-Alpine and Alpine cycles. The pre-Alpine evolution is associated with low-pressure high-temperature metamorphism related to Permo-Triassic lithospheric thinning. In meta-cherts, microtextural relations indicate coeval growth of allanite and garnet during this stage, at ~ 300 Ma. Textures of zircon also indicate crystallisation at HT conditions; ages scatter from 263 to 294 Ma, with a major cluster of data at ~ 276 Ma. In impure marble, U-Pb analyses of titanite domains (with variable Al and F contents) yield apparent 206Pb/238U dates range from Permian to Jurassic. Chemical and isotopic data suggest that titanite formed at Permian times and was then affected by (extension-related?) fluid circulation during the Triassic and Jurassic, which redistributed major elements (Al and F) and partially opened the U-Pb system. The Alpine cycle lead to early blueschist facies assemblages, which were partly overprinted under greenschist facies conditions. The strong Alpine compressional overprint disrupted the pre-Alpine structural imprint and/or reactivated earlier structures. The pre-Alpine metamorphic record, preserved in these slices of metasediments, reflects the onset of the Permo-Triassic lithospheric extension to Jurassic rifting.
ISSN: 0024-4937

hal-00758123
https://hal.archives-ouvertes.fr/hal-00758123
DOI : 10.1016/j.lithos.2012.05.007

Éditeur(s) : HAL CCSD
Résumé : Differentiation of the lithospheric mantle occurred principally through partial melting and extraction of melts. Harzburgites are generally considered as melting residues whereas lherzolites are regarded as pristine mantle weakly affected by melting. However, some orogenic peridotites show evidence of igneous refertilization. In this context, this work re-investigates the nature of the Lherz lherzolites (Pyrenees), type-locality of lherzolites, described as a piece of preserved fertile mantle. Structural and geochemical data show that these lherzolites are not pristine but formed through a refertilization reaction between MORB-like melts and refractory lithosphere. Moreover, the Lherz peridotites were partly used to infer the composition of the primitive upper mantle and these results may have important implications for the nature of the late veneer. Additionally, crystal-preferred orientations of minerals (CPO) highlight a strong feedback between melt percolation and finite strain in the percolated rocks. CPO variations are ruled by a subtle balance between instantaneous melt fraction and local strain rate. This work also investigated the effect of melt percolation on Hf, Nd and Sr isotopes. Isotope systematics in Lherz shows that strong isotopic decoupling may arise in a percolation front. The modelling suggests that decoupled isotopic signatures are generated during porous flow and governed by the melt/matrix elements concentrations, chemical diffusivities or efficiency of isotopic homogenization. Melt-rock interactions can generate “intraplate-like” isotopic signatures. This suggests that a part of isotopic signatures of mantle-related rocks could be generated by diffusional processes associated with melt transport.
La différenciation du manteau lithosphérique s'est principalement effectuée par fusion partielle et extraction de magmas. Les harzburgites sont généralement considérées comme des résidus de fusion tandis que les lherzolites représentent un manteau originel peu affecté par la fusion. Cependant, certaines péridotites orogéniques montrent des évidences de refertilisation magmatique. Dans ce contexte, ce travail remet en cause la nature primitive des lherzolites de Lherz (Pyrénées), lithotype de la lherzolite. Les données structurales et géochimiques montrent que ces lherzolites ne représentent pas du manteau préservé mais qu'elles se sont formées par une réaction de refertilisation entre un liquide de type MORB et une lithosphère réfractaire. De plus, les orientations préférentielles de réseau (OPR) des minéraux montrent une forte interdépendance entre la percolation magmatique et la déformation finie observée dans les roches percolées. Les variations d'OPR semblent contrôlées par un équilibre subtil entre fraction de liquide instantanée et taux de déformation local. Ce travail a également abordé les effets de la percolation magmatique sur la variabilité isotopique des roches mantelliques. Les résultats montrent qu'un fort découplage isotopique peut s'observer dans un front de percolation. Les modèles suggèrent que le découplage des signatures isotopiques se produit pendant la percolation, gouverné par le rapport des concentrations en éléments (magma/matrice), la diffusivité et le processus d'homogénéisation isotopique. Les réactions magma/roche peuvent générer des signatures isotopiques de type intraplaque. Ceci suggère qu'une part des signatures isotopiques des roches ou laves dérivées du manteau pourrait être produite par des processus diffusionnels associés à du transport de magma.
https://tel.archives-ouvertes.fr/tel-00431325

tel-00431325
https://tel.archives-ouvertes.fr/tel-00431325
https://tel.archives-ouvertes.fr/tel-00431325/document
https://tel.archives-ouvertes.fr/tel-00431325/file/theseleroux08.pdf

Éditeur(s) : HAL CCSD American Society for Biochemistry and Molecular Biology
Résumé : International audience
Polycyclic aromatic hydrocarbons (PAHs) such as benzo(a)pyrene (B(a)P) are widely distributed environmental contaminants, known as potent ligands of the aryl hydrocarbon receptor (AhR). These chemicals trigger an early and transient increase of intracellular calcium concentration ([Ca(2+)](i)), required for AhR-related effects of PAHs. The mechanisms involved in this calcium mobilization were investigated in the present study. We demonstrated that B(a)P-mediated [Ca(2+)](i) induction was prevented in endothelial HMEC-1 cells by counteracting β2-adrenoreceptor (β2ADR) activity using pharmacological antagonists, anti-β2ADR antibodies, or siRNA-mediated knockdown of β2ADR expression; by contrast, it was strongly potentiated by β2ADR overexpression in human kidney HEK293 cells. B(a)P was shown, moreover, to directly bind to β2ADR, as assessed by in vitro binding assays and molecular modeling. Pharmacological inhibition and/or siRNA-mediated silencing of various signaling actors acting downstream of β2ADR in a sequential manner, such as G protein, adenylyl cyclase, Epac-1 protein, and inositol 1,4,5-trisphosphate (IP(3))/IP(3) receptor, were next demonstrated to prevent B(a)P-induced calcium signal. Inhibition or knockdown of these signaling elements, as well as the use of chemical β-blockers, were finally shown to counteract B(a)P-mediated induction of cytochrome P-450 1B1, a prototypical AhR target gene. Taken together, our results show that B(a)P binds directly to β2ADR and consequently utilizes β2ADR machinery to mobilize [Ca(2+)](i), through activation of a G protein/adenylyl cyclase/cAMP/Epac-1/IP(3) pathway. This β2ADR-dependent signaling pathway activated by PAHs may likely be crucial for PAH-mediated up-regulation of AhR target genes, thus suggesting a contribution of β2ADR to the health-threatening effects of these environmental pollutants.
ISSN: 0021-9258

hal-00682497
https://hal.archives-ouvertes.fr/hal-00682497
DOI : 10.1074/jbc.M111.319970
PUBMED : 22167199

Éditeur(s) : HAL CCSD Wiley-Blackwell Wiley
Résumé : A new record from the heart of the Moroccan Middle Atlas cedar forests spans the last 18 000 years and provides valuable insight into our understanding of the natural vegetation and environmental changes. The approach is based on the study of pollen content, geochemical elements and grain size analysis. The pollen data indicate that the vegetation was dominated by herbaceous plants until 9000 BP. Such open landscape allowed greater soil erosion and an input of chemical elements from the watershed. After 9000 BP, tree cover, mainly oak, increased slightly and was accompanied by a higher taxonomic diversity. However, several steppe elements remain well represented in the area until 5000 BP, which suggests that the climate was rather dry during the first part of the Holocene. After 6000 BP, the climate became more favourable to expansion of the forest ecosystems, including Cedrus atlantica, thereby reducing erosion. A strong reduction of the tree pollen percentages is recorded after 2000 BP, which may be related to increasing human activities during the Roman period. These forest changes are concomitant with an increase of lead and copper concentrations in the record, probably related to Roman metalworking activities.
ISSN: 0267-8179

hal-01122848
https://hal.archives-ouvertes.fr/hal-01122848
DOI : 10.1002/jqs.2708

Éditeur(s) : HAL CCSD Public Library of Science
Résumé : International audience
Growth series of Palaeozoic fishes are rare because of the fragility of larval and juvenile specimens owing to their weak mineralisation and the scarcity of articulated specimens. This rarity makes it difficult to describe early vertebrate growth patterns and processes in extinct taxa. Indeed, only a few growth series of complete Palaeozoic fishes are available; however, they allow the growth of isolated elements to be described and individual growth from these isolated elements to be inferred. In addition, isolated and in situ scales are generally abundant and well-preserved, and bring information on (1) their morphology and structure relevant to phylogenetic relationships and (2) individual growth patterns and processes relative to species ontogeny. The Late Devonian acanthodian Triazeugacanthus affinis from the Miguasha Fossil-Lagerstä tte preserves one of the best known fossilised ontogenies of early vertebrates because of the exceptional preservation, the large size range, and the abundance of complete specimens. Here, we present morphological, histological, and chemical data on scales from juvenile and adult specimens (scales not being formed in lar-vae). Histologically, Triazeugacanthus scales are composed of a basal layer of acellular bone housing Sharpey's fibers, a mid-layer of mesodentine, and a superficial layer of ganoine. Developmentally, scales grow first through concentric addition of mesodentine and bone around a central primordium and then through superposition of ganoine layers. Onto-genetically, scales form first in the region below the dorsal fin spine, then squamation spreads anteriorly and posteriorly, and on fin webs. Phylogenetically, Triazeugacanthus scales show similarities with acanthodians (e.g. " box-in-box " growth), chondrichthyans (e.g. squamation pattern), and actinopterygians (e.g. ganoine). Scale histology and growth are interpreted in the light of a new phylogenetic analysis of gnathostomes supporting acantho-dians as stem chondrichthyans.
ISSN: 1932-6203

Droits : http://creativecommons.org/licenses/by/
hal-01526367
http://hal.upmc.fr/hal-01526367
http://hal.upmc.fr/hal-01526367/document
http://hal.upmc.fr/hal-01526367/file/journal.pone.0174655.pdf
DOI : 10.1371/journal.pone.0174655

Éditeur(s) : HAL CCSD
Résumé : International audience
The Madeira deposit (Sn, Nb, Ta) at Pitinga, Amazonia, in Brazil, is associated with the albite-enriched facies of the A-type Madeira granite (~1,820 Ma). Fluorine (cryolite), Y, REE, Li, Zr, and Th are potential by-products of the disseminated ore. We studied the xenotime from the core albite-enriched (CAG), transitional albite-enriched granite (TAG) and pegmatitic albite-enriched granite (PAG). In all these rocks, xenotime is magmatic, has high HREE contents (0.37 to 0.54 atoms per formula unit; LREE are not detected), and low U, Th and Ca content. The CAG xenotime is the richest in REE, followed by that in the PAG and TAG units. Fluorine was detected in all xenotime crystals from CAG (up to 5.10%) and from PAG (up to 1.40%) and in most crystals from TAG (up to 0.68%). Where the xenotime is richer in F, the Na and Si increase, the P, Ca, and the effectiveness of a thorite-type substitution decrease. Fluorine controls the ratio REE/Y; the richer the xenotime in F, the richer it is in REE, in particular Er and Yb. The cell parameters a and c are significantly shortened in F-rich xenotime. There is no evidence of OH in the structure. We contend that fluorine substitutes for O to form PO3F tetrahedra, as in bobdownsite. The formation of the PO3F tetrahedra in the xenotime accounts well for the compatibility between the crystallographic characteristics and the chemical composition.
The Canadian Mineralogist

insu-00805907
https://hal-insu.archives-ouvertes.fr/insu-00805907
DOI : 10.3749/canmin.50.6.1453

Éditeur(s) : HAL CCSD Springer Verlag (Germany)
Résumé : International audience
*Context Increased knowledge on diversity in wood properties would have implications both for fundamental research and for promoting a diversification of uses as material. *Aims The objective is to contribute to overcoming the critical lack of data on the diversity of wood dynamic mechanical/viscoelastic vibrational properties, by testing lesser-known species and categorizing sources of variability. *Methods Air-dry axial specific dynamic modulus of elasticity (E'/γ) and damping coefficient (tanδ) were measured on a wide sampling (1792 specimens) of 98 wood types from 79 species. An experimental device and protocol was designed for conducting systematic (i.e. rapid and reproducible) characterizations. *Results Diversity at the specimens' level corroborates the "standard" relationship between tanδ and E'/γ, which is discussed in terms of orientation of wood elements and of chemical composition. Diversity at the species level is expressed on the basis of results for normal heartwood, with specific gravity (γ) ranging from 0.2 to 1.3. Axial E'/γ ranges from 9 to 32 GPa and tanδ from 4×10-3 to 19×10-3. Properties distribution follows a continuum, but with group characteristics. The lowest values of tanδ are only found in certain tropical hardwoods. Results can also suggest alternative species for musical instruments making.
Annals of Forest Science

hal-00808242
https://hal.archives-ouvertes.fr/hal-00808242
https://hal.archives-ouvertes.fr/hal-00808242/document
DOI : 10.1007/s13595-011-0166-z

Résumé : L’objet de cette thèse est l’étude des comportements mécanique et à la corrosion d’un nouveau système de fondation, dit pieux SPIRMEC, adapté aux structures légères. Le travail s’est focalisé sur deux grands aspects. Le premier aspect concerne l’analyse du comportement sous chargement axiale des pieux SPIRMEC sur la base de l’expérimentation et de la modélisation numérique dans un sol mou non cohésif. Quant au deuxième aspect, il traite du problème de la corrosion de l’acier constituant le pieu dans un environnement tropical humide. Le comportement des pieux SPIRMEC sous une charge axiale de traction, dans un sol fin non cohésif, a montré le développement d’une surface cylindrique de rupture. Celle-ci ne dépend pas de la configuration géométrique des pieux tel que : l’espacement S, le diamètre d’hélice Dh et le diamètre du tube d. En adoptant ce critère de rupture et à l’aide d’une analyse statistique des données, nous avons proposé quatre méthodes analytiques de prédiction de la capacité portante des pieux SPIRMEC à partir des essais in-situ et au laboratoire qui sont: •Méthode CPT basée sur la résistance de pointe pénétromètrique (essai CPT), •Méthode MPT basée sur la pression limite pressiomètrique (essai MPT), •Méthode du couple d’installation, •Méthode analytique basée sur les paramètres de cisaillement de sol notamment l’angle de frottement interne (essais triaxial et boîte de cisaillement). Ces méthodes tiennent compte de la géométrie du pieu, du procédé de mise en oeuvre et de la compacité du sol. L’analyse de performance des méthodes proposées a montré que les méthodes analytique et CPT représentent mieux le comportement des pieux testés. La modélisation numérique du comportement des pieux SPIRMEC sous charge axiale de traction a été également étudiée à l’aide du code de calcul Plaxis 2D. Un modèle axisymétrique a été adopté pour modéliser la géométrie de la structure. Le modèle de comportement hardening soil a été retenu pour modéliser le comportement élastoplastiq des couches de sol. Un modèle élastique linéaire a été retenu pour le pieu. Quant au comportement de l’interface sol-structure, il a été pris en compte par un modèle élastoplastique basé sur les critères de Mohr-Coulomb. L’expansion du sol résultant de l’installation des pieux a été approchée par une cavité cylindrique. Cette dernière a été modélisée par des déformations volumiques anisotropes. Nous avons constaté, qu’appliquer une déformation volumique de l’ordre de 40% permet une bonne concordance entre les résultats numériques et expérimentaux. L’étude paramétrique nous a également permis de constater l’existence d’une variation linéaire entre la capacité portante et l’espacement S. Le comportement de l’acier galvanisé dans le sol a été également étudié au moyen de trois approches: électrochimique, visuelles grâce au microscope électronique et gravimétrique. Les tests électrochimiques de corrosion du zinc ont été réalisés dans la solution de sol artificielle pour deux périodes bien distinctes : saison des pluies et après 8 mois de contact sol-pieu. Une forte dépendance est constatée de la vitesse de corrosion de zinc au pH et à la conductivité de la solution. La vitesse de corrosion est plus importante en saison des pluies qu’après 8 mois de contact de pieu avec le sol. Les fortes concentrations en sulfates semblent augmenter la vitesse de corrosion. Les analyses menées au MEB montrent que la zone de fluctuation de nappe et en surface externe (sol/air) sont les zones les plus corrodées. La comparaison entre les différentes techniques d’évaluation de la vitesse de corrosion a montré que l’eau de nappe peut être utilisée comme un milieu représentatif du profil chimique d’un sol non cohésif et légèrement granulaire.
The purpose of this thesis is to study the both behaviors mechanical and of the corrosion of a new foundation system, called spirec piles, for lightweight structures. The work was based on two main aspects. The first aspect concerns the analysis of behavior of the spirmec piles under axial loading on the basis of experimental and numerical modeling in a non-cohesive soft soil. On the second aspect, it addresses the problem of corrosion of steel forming the pile in a humid tropical environment. The behavior of the tested piles under axial traction load, in a non-cohesive soil, showed the development of a cylindrical surface of failure. This does not depend on the geometrical configuration of the tested piles such that: the spacing s, the helix diameter dh and the diameter of the shaft. By adopting this failure criterion and using statistical data analysis, we proposed four analytical methods for predicting the bearing capacity of the piles from in-situ and laboratory tests, which are: cpt method based on tip resistance penetrometer (cpt test), mpt method based on pressuremeter limit pressure (test mpt), method of installation torque and analytical method based on the shear parameters of soil (triaxial tests and shear box). These methods take into account the geometry of the pile, the method and implementation of soil compaction. Performance analysis of the proposed methods showed that the analytical methods and cpt represent better the behavior of piles tested. An axisymmetric condition was assumed to model this geometry in two-dimensional space. In this study, we proposed to model the pipe screw pile with plates elements available in plaxis 2d. The helixes were modeled as circular disks. Interface elements were incorporated along the pile to simulate the soil-pile interaction. Hardening soil model was chosen to describe the soil with drained behavior was assigned for all layers. Linear elastic for pile and elastic plastic model based on the mohr-coulomb criterion was used to describe the interface behavior. The lateral expansion generated by the pile shaft was modeled by anisotropic volumetric strains (ɛxx=ɛzz, ɛyy=0). The pile behavior under tensile loading at different volumetric strains, it is clear that the best fit was obtained at volumetric strain of 40%. The parametric study also allowed us to establish the existence of a linear variation between the bearing capacity and spacings. The behavior of the galvanized steel in the ground has also been studied using three approaches such as: electrochemical, microscopic imaging and gravimetrically. Electrochemical tests of the corrosion of the zinc have been made in artificial soil solution into two periods, the rainy season and after eight months of contact soil-pile. Is a strong dependence of the observed corrosion rate of the zinc at the ph and conductivity of the solution. The corrosion rate is higher in the rainy season compared to eight months of contact of the pile with soil. High sulfate concentrations increase the rate of corrosion. The meb analysis shows that the fluctuation zone of the water table is the most corroded area. Comparison between the different methods of evaluating the corrosion rate showed that the ground water may be used as a representative profile of the chemical environment of a non-cohesive soil and slightly granular.

http://www.theses.fr/2014AGUY0790/document

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
For the first time, an albite orthogneiss has been recognised and dated within the HP-LT blueschist facies metabasites and metapelites of the Ile de Groix. It is characterised by a peraluminous composition, high LILE, Th and U contents, MORB-like HREE abundances and moderate Nb and Y values. A U-Pb age of 480.8 ± 4.8 Ma was obtained by LA-ICP-MS dating of zircon and titanite. It is interpreted as the age of the magmatic emplacement during the Early Ordovician. Morphologically different zircon grains yield late Neoproterozoic ages of 546.6-647.4 Ma. Zircon and titanite U-Pb ages indicate that the felsic magmatism from the Ile de Groix is contemporaneous with the acid, pre-orogenic magmatism widely recognised in the internal zones of the Variscan belt, related to the Cambro-Ordovician continental rifting. The magmatic protolith probably inherited a specific chemical composition from a combination of orogenic, back-arc and anorogenic signatures because of partial melting of the Cadomian basement during magma emplacement. Besides, the late Devonian U-Pb age of 366 ± 33 Ma obtained for titanite from a blueschist facies metapelite corresponds to the age of the HP-LT peak metamorphism.
ISSN: 1437-3254

insu-00714570
https://hal-insu.archives-ouvertes.fr/insu-00714570
DOI : 10.1007/s00531-011-0732-5

Éditeur(s) : HAL CCSD
Résumé : International audience
Spermatogenesis is a highly sophisticated process involved in the transmission of genetic heritage. It includes halving ploidy, repackaging of the chromatin for transport, and the equipment of developing spermatids and eventually spermatozoa with the advanced apparatus (e.g., tightly packed mitochondrial sheat in the mid piece, elongating of the tail, reduction of cytoplasmic volume) to elicit motility once they reach the epididymis. Mammalian spermatogenesis is divided into three phases. In the first the primitive germ cells or spermatogonia undergo a series of mitotic divisions. In the second the spermatocytes undergo two consecutive divisions in meiosis to produce haploid spermatids. In the third the spermatids differentiate into spermatozoa in a process called spermiogenesis. Paracrine, autocrine, juxtacrine, and endocrine pathways all contribute to the regulation of the process. The array of structural elements and chemical factors modulating somatic and germ cell activity is such that the network linking the various cellular activities during spermatogenesis is unimaginably complex. Over the past two decades, advances in genomics have greatly improved our knowledge of spermatogenesis, by identifying numerous genes essential for the development of functional male gametes. Large-scale analyses of testicular function have deepened our insight into normal and pathological spermatogenesis. Progress in genome sequencing and microarray technology have been exploited for genome-wide expression studies, leading to the identification of hundreds of genes differentially expressed within the testis. However, although proteomics has now come of age, the proteomics-based investigation of spermatogenesis remains in its infancy. Here, we review the state-of-the-art of large-scale proteomic analyses of spermatogenesis, from germ cell development during sex determination to spermatogenesis in the adult. Indeed, a few laboratories have undertaken differential protein profiling expression studies and/or systematic analyses of testicular proteomes in entire organs or isolated cells from various species. We consider the pros and cons of proteomics for studying the testicular germ cell gene expression program. Finally, we address the use of protein datasets, through integrative genomics (i.e., combining genomics, transcriptomics, and proteomics), bioinformatics, and modelling.
Systems Biology in Reproductive Medicine

hal-00877749
https://hal.archives-ouvertes.fr/hal-00877749
DOI : 10.3109/19396368.2012.691943
PUBMED : 22788530

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
Mantle-derived xenoliths hosted by melilitite lavas from In Teria (Ahaggar, SE Algeria) include garnet and spinel peridotites, pyroxenite and phlogopite megacrysts. The spinel and garnet peridotites record an early deformation event, which formed porphyroclastic microstructures and olivine crystal preferred orientations, followed by static infiltration of hydrous alkaline melts. This metasomatic stage (stage 1) is characterized by the crystallization of phlogopite in the garnet and spinel peridotites, amphibole in the spinel peridotites and clinopyroxene in the garnet peridotite, which record chemical equilibration with an alkaline silicate melt. These early events were largely overprinted by carbonatitic metasomatism (stage 2), which is observed only in the spinel peridotites. Spinel peridotite major and trace element compositions, as well as the compositions of newly formed minerals, are characteristic of interaction with carbonate melt, associated with strong enrichment in incompatible trace elements in clinopyroxene. This second stage was followed by crystallization of pyroxenites (stage 3) in vein conduits, probably segregated from alkaline melts. We propose a scenario in which the different metasomatic imprints record successive stages of interaction between lithospheric mantle and sublithospheric melts throughout the Cenozoic. In Sr–Nd isotope space, the host melilitites and several xenoliths are clustered and plot close to the HIMU mantle end-member. However, some peridotite xenoliths are shifted towards more radiogenic 87Sr/86Sr values. In 207Pb/204Pb–206Pb/204Pb and 208Pb/204Pb–06Pb/204Pb space the In Teria samples define a relatively large domain characterized by high 206Pb/204Pb and 208Pb/204Pb, consistent with a contribution of an HIMU component, considered to represent a sublithospheric signature. The highest 87Sr/86Sr values are comparable with those ascribed to the EM1 mantle end-member, representing the signature of the lower continental lithosphere, and are probably inherited from the pre-metasomatic lithospheric mantle beneath In Teria. Numerical modelling of porous percolation of melt of sublithospheric origin through an EM1-like lithospheric mantle protolith reproduces the In Teria peridotite compositions, using moderately sub-chondritic Sr/Nd values for the peridotite (e.g. In Teria garnet peridotite) and moderately super-chondritic Sr/Nd values in the melt (approximately ocean island basalt values). A few spinel peridotites require a component characterized by a 143Nd/144Nd signature higher than both the EM1 end-member and the local Ahaggar basalts; the 208Pb/204Pb compositions of several samples point to a component with a depleted mid-ocean ridge basalt (MORB) mantle (DMM) signature. Thus the lithospheric mantle beneath In Teria probably did not have a uniform EM1 signature before the onset of metasomatism; it included a DMM peridotite component as well as some peridotites with elevated 143Nd/144Nd values recording long-term LREE depletion.
ISSN: 0022-3530

hal-01356781
https://hal.archives-ouvertes.fr/hal-01356781
DOI : 10.1093/petrology/egw009

Éditeur(s) : HAL CCSD
Résumé : Processes that occur within and across the oceanic crust–in particular along mid-ocean ridges and oceanic spreading centers—play a huge role in the dynamics of the Earth. The largest fluxes of heat and material between the Earth's mantle, crust, and seawater occur via magmatic, tectonic, and hydrothermal processes along oceanic spreading centers and their vast flanks. Roughly two thirds of the Earth's surface is accreted through magmatic and tectonic processes along mid-ocean ridges, and subduction of this ocean crust in turn influences mantle compositions. Exchange of elements between ocean crust and seawater strongly influences seawater compositions and leaves a geologic record of fluid-rock reactions in altered ocean crust. Some of these reactions contribute energy to microbial activity of a largely unexplored biosphere. The dynamics of ridge and ocean crustal processes therefore have enormous implications for thermal, chemical, and biological exchanges between the solid Earth and the hydrosphere.
EOS

hal-00564842
https://hal.archives-ouvertes.fr/hal-00564842
DOI : 10.1029/2010EO150001

Éditeur(s) : HAL CCSD Elsevier
Résumé : Kyanite and zoisite eclogites from the Limousin area in the Variscan French Massif Central (FMC) have been formed by deep subduction to 100 km depth at peak pressure-temperature conditions around 660 degrees C and 2.9 GPa. They belong to a thin tectonic unit comprising ophiolitic bodies devoid of HP-UHP markers and forming a transported suture zone now separating the two main lithotectonic units of the FMC with contrasted tectono-metamorphic features (namely the lower and upper allochthons). Composition of kyanite-eclogites is similar to supra-subduction-zone basalts found in back-arc basins or island arcs (LREE depleted, negative Nb-Ta anomalies, epsilon Nd: +6 to + 9). Zoisite eclogites have the major-element fingerprint of ultrabasic iron-rich plagioclase cumulates common in continental intrusions or forming Fe-Ti oceanic gabbros. The distribution of immobile trace-elements is however more comparable to alkaline Si-undersaturated rocks, but the Sr-Nd isotopic composition (Sr-87/Sr-86: 0.706; epsilon Nd: -3 to -5) suggests the intervention of an old radiogenic crustal component during their petrogenesis. The chemical composition of hydrous zoisite eclogites does not correspond closely to a common magmatic precursor. It is thus suggested that, by analogy with well exposed worldwide HP-UHP terranes, at least a part of the trace-element signature and the isotopic compositions are controlled by channelled fluid-rock interaction at UHP conditions, leading to localised segregation of zoisite that hosts nearly all Sr and LREE budgets of the bulk eclogite. Sr-Nd isotopic composition of these samples is thus controlled by zoisite and probably represents the isotopic composition of the fluid phase present during UHP recrystallisation. Zircons extracted from a zoisite eclogite were dated in-situ by LA-ICP-MS. Crystallisation of the magmatic precursor is bracketed between 489 and 475 Ma and the UHP event is dated at 412 +/- 10 Ma, in agreement with published ages for the Eo-Variscan HP stage in the FMC. A late resetting of the U-Pb isotopic system at 382 +/- 7 Ma is related to an anatectic high pressure-medium pressure event, well known in the Limousin area. The oceanic eclogites dated in this study are tentatively linked to the Galicia-South Brittany Lower Paleozoic Ocean; they show evidence of the existence of an intra-oceanic subduction zone at the Lower Ordovician and of partial closure of this oceanic domain by ocean-continent subduction during Early Devonian.
ISSN: 0024-4937

hal-00512835
https://hal.archives-ouvertes.fr/hal-00512835
DOI : 10.1016/j.lithos.2010.05.013

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We carried out detailed petrographic, major and trace element geochemical, microstructural and FTIR analyses on eight characteristic ultramafic xenoliths from Nyos and Barombi Mbo Lakes in the continental sector of the Cameroon Volcanic Line (CVL). The studied xenoliths are spinel lherzolites showing lithologies similar to the other xenoliths reported previously along the CVL. They have protogranular and porphyroclastic textures. One of the Barombi xenolith contains amphibole, which had not been previously reported in this locality. Amphibole is common in the Nyos xenoliths suite. Peridotite xenoliths from both localities show some chemical heterogeneity, but Barombi xenoliths generally are less depleted in basaltic elements with respect to Nyos xenoliths. Trace element compositions of Nyos spinel lherzolites show a moderately depleted initial (premetasomatic) composition and variable enrichment in REE. Evidence for both modal and cryptic metasomatism is present in Nyos xenoliths. Rare earth element patterns of clinopyroxene suggest that interaction between mafic melts and the upper mantle occurred beneath the Nyos locality. Barombi Mbo xenoliths, on the other hand, record a small degree of partial melting. The Barombi Mbo xenoliths have weak, dominantly orthorhombic olivine crystal preferred orientations, whereas Nyos ones have strong axial-[010] patterns, which may have formed in response to transpression. Nominally anhydrous mantle minerals (NAMs) of the Barombi Mbo xenoliths show generally higher bulk concentrations of ‘water’ (70–127 ppm) than Nyos xenoliths (32–81 ppm). The Barombi Mbo xenoliths could originate from a juvenile segment of the lithospheric mantle, which had been originally part of the asthenosphere. It became a part of the lithosphere in response to thermal relaxation following the extension, forming a weakly deformed lower lithospheric mantle region along the CVL. The Nyos xenoliths, however, represent a shallow lithospheric mantle bearing imprints of several depletion and enrichment events probably prior or following the extension (at ∼30 Ma).
ISSN: 0899-5362

hal-01236039
https://hal.archives-ouvertes.fr/hal-01236039
DOI : 10.1016/j.jafrearsci.2015.07.006

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Almost all Red Sea deeps contain metal-rich sediments covered by brine pools. It is generally agreed that these metal-rich deposits precipitated from overlying metal-rich brines that originated from migrating hydrothermal fluids. No brine pool has ever been reported in Thetis Deep, inciting us to evaluate if such a brine layer ever occurred in the deep during the past. In order to address that questioning, a study combining mineralogical, geochemical (major-, minor-, rare-earth elements) and isotopic (Sr. Nd. Pb) approaches was completed on cored sediments and extracted interstitial waters from inside and outside the deep.;The sediments have an overall hydrothermal origin, as shown by the REE concentrations and patterns, metal contents, and Pb-Nd isotopic data, all pointing to a mantle signature. The intensity of the hydrothermal activity varied with time in the deep; the most intense episode resulting in an almost pure Fe-oxi-hydroxide layer. Varied chemical arguments, especially the Zr and REE data of the sediments, favor the fact that the whole sedimentation in Thetis Deep occurred in the absence of a stable, salt-rich and mineralized brine pool, and that no brine layer ever existed. This conclusion is supported by the constant Sr isotope composition of the sediment and its interstitial waters that are almost identical to that of the Red Sea seawater. The study also suggests that hydrothermal activity monitored fluid supplies that interacted differently with seawater in the different Red Sea deeps, resulting in an overall formation of metal-rich sediments, but along varied local conditions. (C) 2009 Elsevier B.V. All rights reserved.
ISSN: 0375-6742

hal-00475646
https://hal.archives-ouvertes.fr/hal-00475646
DOI : 10.1016/j.gexplo.2009.10.001