Éditeur(s) : HAL CCSD
Résumé : Volatile-rich, silica-undersaturated alkaline lavas record the important role of fluids during fluid-rock and magma-rock interactions in the mantle, which are key processes to understand the dynamics of the convective mantle and lithosphere-asthenosphere interactions in intracontinental settings. The aim of this thesis is to bring new constraints on the genesis of alkaline magmas by characterizing the crystallization conditions, the source and the partial melting processes taking part in the genesis of olivine nephelinites, pyroxene nephelinites and basanites from the Jbel Saghro volcanic field in the Moroccan Anti Atlas.The petrological and geochemical study of rocks and minerals coupled with the analysis of fluid inclusions constrains the pre-eruptive conditions of Saghro nephelinites to 1.7–2.2 GPa and ~1350 °C. Minerals show that nephelinitic magmas are rich in volatile elements (Cl, F, S), and fluid inclusions indicate that magmas were saturated with a CO2-rich fluid at pressures > 590 MPa. The various mineralogical assemblages and the presence of peridotite xenoliths suggest a rapid ascent for olivine nephelinites and more complex processes at depth for pyroxene nephelinites.Fractional crystallization and partial melting modelling of Saghro mafic lavas indicate that they are low-degree melts (0.6–2.5 %) of an amphibole-bearing carbonated peridotite enriched in incompatible elements, at the garnet-spinel transition (~80–85 km). Saghro nephelinites display a temporal evolution with a slight increase of the degree of melting and a decrease of the amount of residual amphibole from the oldest (olivine nephelinites, 9.6 Ma) to the most recent (pyroxene nephelinites, 2.9 Ma). Basanites form a system that is independent from nephelinites and are slightly higher-degree melts. Important variations in their chemical composition suggest variable amounts of fractional crystallization during ascent.The peculiar characteristics of Saghro nephelinites and basanites (enrichment in incompatible elements, negative anomalies in K, Zr, Hf and Ti, high Ca/Al and Zr/Hf ratios) indicate that their source was affected by carbonatitic metasomatism. The influence of this metasomatism is stronger for pyroxene nephelinites than for olivine nephelinites. These results suggest fluid-rock interactions beneath the Northwest African Craton, leading to the formation of a metasomatized mantle by CO2-rich carbonatitic components at the lithosphere-asthenosphere transition. The origin of the metasomatism inducing source enrichment and the formation of amphibole veins could be attributed to the melting of relict subducted oceanic lithosphere. The relatively low melting temperatures (< 1350 °C) suggest the absence of a thermal anomaly beneath the Jbel Saghro, and thus support a lithosphere delamination model as precursor of Saghro volca0,3nism. However, the increasing degree of partial melting over time, also observed in the Middle Atlas, together with the isotopic and geochemical similarities with Canary Islands alkaline lavas does not allow us to discard the influence of a deviation of the Canary mantle plume beneath northwest Africa.
Les laves alcalines sous-saturées riches en éléments volatils sont les marqueurs du rôle important des fluides dans le manteau et des interactions fluide-roche et magma-roche, processus clés pour comprendre la dynamique du manteau convectif et les interactions asthénosphère-lithosphère en domaine intracontinental. L’objectif de cette thèse est d’apporter de nouvelles contraintes sur la genèse des magmas alcalins en caractérisant les conditions de cristallisation, la source et les processus de fusion partielle à l’origine des néphélinites à olivine, des néphélinites à pyroxène et des basanites du champ volcanique du Jbel Saghro dans l’Anti-Atlas marocain.L’étude pétrologique et géochimique des roches et des minéraux, couplée à l’analyse des inclusions fluides a permis de contraindre les conditions pré-éruptives des néphélinites de Saghro à 1.7–2.2 GPa et ~1350 °C. Les minéraux montrent que les magmas néphélinitiques sont riches en éléments volatils (Cl, F, S), et les inclusions fluides indiquent que les magmas étaient saturés en fluide riche en CO2 à des pressions > 590 MPa. Les différents assemblages minéralogiques des néphélinites et la présence de xénolites péridotitiques suggèrent une ascension rapide des néphélinites à olivine et des processus plus complexes en profondeur pour les néphélinites à pyroxène.La modélisation des processus de cristallisation fractionnée et de fusion partielle des laves mafiques de Saghro a permis de déterminer qu’elles sont issues de faibles taux de fusion partielle (0.6–2.5 %) d’une péridotite carbonatée enrichie en éléments incompatibles, au niveau de la transition grenat–spinelle (~80–85 km) et en présence d’amphibole. Les néphélinites de Saghro montrent une évolution temporelle avec une légère augmentation du taux de fusion et une diminution de la quantité d’amphibole au résidu des plus anciennes (néphélinites à olivine, 9.6 Ma) aux plus récentes (néphélinites à pyroxène, 2.9 Ma). Les basanites forment un système indépendant des néphélinites et sont issues de taux de fusion plus élevés. Les fortes variations dans leur composition chimique suggèrent qu’elles ont subi de la cristallisation fractionnée lors de leur ascension.Les caractéristiques particulières des néphélinites et basanites de Saghro (enrichissement en éléments incompatibles, anomalies négatives en K, Zr, Hf et Ti, rapports Ca/Al et Zr/Hf élevés) indiquent que leur source a subi un métasomatisme principalement carbonatitique. L’influence de ce métasomatisme est plus forte pour les néphélinites à pyroxène que pour les néphélinites à olivine, impliquant une évolution temporelle de l’intensité du métasomatisme. Ces résultats suggèrent des interactions fluide-roche sous le craton Nord-Ouest Africain, entraînant la formation d'un manteau métasomatisé par des composants carbonatitiques riches en CO2 au niveau de la transition lithosphère-asthénosphère. L’origine du métasomatisme provoquant l’enrichissement de la source et la formation de veines d’amphibole pourrait être liée à la fusion de reliquats de croûte océanique subductée. Les températures de fusion relativement faibles (< 1350 °C) suggèrent l’absence d’anomalie thermique sous le Jbel Saghro, et favorisent donc un modèle de délamination de la lithosphère comme initiateur du volcanisme. Cependant, l’augmentation du taux de fusion partielle au cours du temps, également observée dans le Moyen Atlas, et les similitudes isotopiques et géochimiques avec les laves alcalines des îles Canaries ne permettent pas d’exclure une influence du panache des Canaries sur la source du volcanisme alcalin du Jbel Saghro.
https://tel.archives-ouvertes.fr/tel-01615888

NNT : 2015MONTS070
tel-01615888
https://tel.archives-ouvertes.fr/tel-01615888
https://tel.archives-ouvertes.fr/tel-01615888/document
https://tel.archives-ouvertes.fr/tel-01615888/file/53752_CHAMBOREDON_2015_archivage_cor.pdf

Éditeur(s) : HAL CCSD Wiley
Résumé : International audience
Coral bleaching events threaten coral reef habitats globally and cause severe declines of local biodiversity and productivity.Related to high sea surface temperatures (SST), bleaching events are expected to increase as a consequenceof future global warming. However, response to climate change is still uncertain as future low-latitude climatic conditionshave no present-day analogue. Sea surface temperatures during the Eocene epoch were warmer than forecastedchanges for the coming century, and distributions of corals during the Eocene may help to inform models forecastingthe future of coral reefs. We coupled contemporary and Eocene coral occurrences with information on their respectiveclimatic conditions to model the thermal niche of coral reefs and its potential response to projected climate change.We found that under the RCP8.5 climate change scenario, the global suitability for coral reefs may increase up to 16%by 2100, mostly due to improved suitability of higher latitudes. In contrast, in its current range, coral reef suitabilitymay decrease up to 46% by 2100. Reduction in thermal suitability will be most severe in biodiversity hotspots, especiallyin the Indo-Australian Archipelago. Our results suggest that many contemporary hotspots for coral reefs,including those that have been refugia in the past, spatially mismatch with future suitable areas for coral reefs posingchallenges to conservation actions under climate change.
ISSN: 1354-1013

hal-01145464
https://hal.archives-ouvertes.fr/hal-01145464
DOI : 10.1111/gcb.12868

Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
Numerical models show that small-scale convection (SSC) occurring atop a mantle plume is a plausible mechanism to rejuvenate the lithosphere. The triggering of SSC depends on the density contrast and on the rheology of the unstable layer underlying the stagnant upper part of the thermal boundary layer (TBL). Partial melting may change both properties. We analyze, using 2-D numerical simulations, how partial melting influences the dynamics of time-dependent SSC instabilities and the resulting thermo-mechanical rejuvenation of an oceanic plate moving atop of a plume. Our simulations show a complex behavior, with acceleration, no change, or delay of the SSC onset, due to competing effects of the latent heat of partial melting, which cools the plume material, and of the buoyancy increase associated with both melt retention and depletion of residue following melt extraction. The melt-induced viscosity reduction is too localized to affect significantly SSC dynamics. Faster SSC triggering is promoted for low melting degrees (low plume temperature anomalies, thick lithosphere, or fast moving plates), which limit both the temperature reduction due to latent heat of melting and the accumulation of depleted buoyant residue in the upper part of the unstable layer. In contrast, high partial melting degrees lead to a strong temperate decrease due to latent heat of melting and development of a thick depleted layer within the sublithospheric convecting layer, which delay the development of gravitational instabilities. Despite differences in SSC dynamics, the thinning of the lithosphere is not significantly enhanced relatively to simulations that neglect partial melting.
ISSN: 1525-2027

hal-01277175
https://hal.archives-ouvertes.fr/hal-01277175
DOI : 10.1002/2015GC005967

Éditeur(s) : HAL CCSD
Résumé : This work focus on the characterization of the source and dynamic of compactional fluids during sedimentary burial, through two complementary examples of late orogenic oil‐field half‐grabens: The exhumed Lodève Permian Basin and a deep buried Jurassic basin in the North Viking Graben (North Sea).Constituting the main part of the thesis, a multi‐disciplinary approach was conducted in the Lodève Basin where Ba‐F‐Cu‐Pb polymetallic mineralized systems are trapped into synrift faults and paleokarsts in the carbonate basement at the hinge point of the rollover. The source, timing and P/T conditions of fluid migration were deduced from the analysis of the microfabric, the fluid inclusions microthermometry, and the isotopic (Sr, S, O, H) and Rare Earth Element (REE) signature. Results are then crossed with a structural and thermal modeling that consolidates the sequence and dynamics of fluid during burial.A similar approach was conducted in the North Viking Graben where fluid markers are restricted to 3D seismic and well core data. Comparable Ba‐Pb‐Zn veins are reported in basin margin, plugging one of the most important siliciclastic hydrocarbon reservoir in the substratum. This analysis provides additional constraints on basinal fluid behavior and allows us to propose a global dynamic model for various compositions of fluids and reservoirs.We conclude to a polyphase fluid sequence history including:(a) In the carbonate basement of the Lodève Basin, karstic paleocanyon incisions and associated cavities coupled to synrift fault, act as major drain for fluids. These structures are early affected by hypogen‐sulfuric karstification in response to the interaction between bacterial oxidation of sulfides entrapped within Lower Permian blackshales and the basement oxidizing aquifer.(b) Disequilibrium compaction initiates overpressure‐driven basinal fluid migration towards basin margins, characterized by temperatures around 150‐180°C and salinities between 9 et 18wt%eq.NaCl. Isotopic (Sr, S, O) and REE analyses reveal that Ba‐M+‐rich mineralizing fluids derived mainly from buried blackshales diagenesis. External fluids coming from the lower crust are also identified that play a key role in fluorite precipitation by the leaching of late hercynian granites (mean temperature of 250°C and salinity > 20wt%eq.NaCl).(c) During the synrift period, fluid overpressure is responsible for the periodic reactivation of fault plane according to seismic‐valve process, bedded‐control shearing and hydraulic brecciation at the basement‐seal interface. These mechanisms induce cyclic polymetallic mineralization by the mixing between in‐situ formation water and deep ascending basinal fluids.(d) Thermogenic fluids expulsion starts with last basinal fluids during late burial stage. Hydrocarbons thus migrate along the same regional pathways up to the rollover crest, where they are partly rerouted by the previous mineralized baffle.(e) In the Lodève basin, post‐rift exhumation of the margins led to the remobilization of synrift deposits by subaerial biochemical processes at the sulfate‐methane transition. The latter results from the interaction between the still active hydrocarbon dysmigration with a playa lake sulfate‐rich aquifer. Secondary low‐temperature barite fronts precipitate then within basement meteoric karsts.In addition to the « source to sink » model of basinal fluids, this work provides new insights on the early plugging of hydrocarbon reservoirs and for the metallogenesis of Mississippi Valley‐Type deposits.
Ce travail porte sur la caractérisation de la source et de la dynamique des fluides de bassin au cours de leur chargement à travers deux exemples complémentaires de demi‐grabens tardi‐orogéniques pétroliers : Le Bassin Permien de Lodève, aujourd’hui à l’affleurement et un bassin jurassique enfouis dans le North Viking Graben (Mer du Nord).Le coeur de la thèse concerne le Bassin de Lodève où, à partir d’une approche pluridisciplinaire intégrée, nous avons caractérisé l’architecture des minéralisations (Ba, F, Cu, Pb) piégées dans un réseau paléokarstique alimenté par les failles syn‐rift, dans le substratum carbonaté à l’apex du roll‐over. La source, le calendrier et les conditions de migration des fluides ont été approchés à partir de l’analyse de la micro‐fabrique, la microthermométrie sur inclusions fluides, les analyses isotopiques (Sr, S, O, H) et de Terres Rares. Les résultats analytiques ont été enfin croisés avec un modèle thermique et structural du bassin qui conforte la séquence et la dynamique du système fluide en cours d’enfouissement.Une démarche similaire, mais plus limitée, a été conduite dans le bassin du North Viking Graben où l’accès aux marqueurs fluides est restreint aux données de sismique 3D et de carottes. Comme à Lodève, les minéralisations Ba‐Pb‐Zn colmatent un réservoir dans le substratum à l’apex du roll‐over. Elles se présentent sous forme de ciments dans des grès ou des fractures. Cette analyse apporte des contraintes complémentaires et permet de proposer un modèle dynamique général avec des variantes en fonction de la nature des fluides et des réservoirs.On retiendra donc la séquence fluide suivante :(a) Dans le cas du bassin de Lodève sur substratum carbonaté, les chemins préférentiels de drainage se développent dans des paléocanyons N‐S couplés à un réseau de fractures et d’endokarsts météoriques. Ces derniers sont élargis en début de rifting par la dissolution hypogène sulfurique produite par l’oxydation bactérienne des sulfates et des pyrites des blackshales, au contact de l’aquifère oxydant du Cambrien.(b) Le déséquilibre de compaction initie la migration des fluides interstitiels en surpression vers les marges avec des températures autour de 150‐180°C et des salinités entre 9 et 18wt%eq.NaCl. Les analyses isotopiques (Sr, S, O) révèlent que la majorité des fluides provient de l’altération diagénétique des blackshales riches en métaux. Des interactions sont également mises en évidence avec des fluides profonds (entre 240°C et 260°C ; salinités > à 20wt%eq.NaCl), qui lessivent les granites tardi‐hercyniens.(c) Pendant le syn‐rift, les conditions de surpression de fluide permettent la réactivation cyclique des failles, les décollements stratigraphiques et la formation de brèches hydrauliques, favorisant la mise en connexion avec les réservoirs superficiels à l’apex du rollover. Le modèle de Sibson ajusté aux fluides de bassins est alors le moteur de la migration verticale.(d) Les fluides thermogéniques commencent à être expulsés avec les derniers fluides de compaction au cours d’un stade plus évolué de l’enfouissement en empruntant les mêmes chemins jusqu’à l’apex du roll over. Ils sont alors partiellement freinés et déviés par les colmatages minéralisés antérieurs.(e) A Lodève, la continentalisation des minéralisations antérieures au cours de l’exhumation post‐rift conduit à leur remaniement partiel au niveau de la transition sulfate‐méthane induite par l’interaction entre une playa évaporitique et la dysmigration des hydrocarbures. Des barytines secondaires de basse température, déprimées en Sr sont alors précipitées de manière synsédimentaire dans des karsts météoriques du socle.Outre l’illustration d’un modèle complet (source to sink) de dynamique des fluides dans un bassin, ce travail apporte de nouvelles contraintes dans l’approche du colmatage des réservoirs à hydrocarbures sur les têtes de blocs basculés et sur la genèse des gîtes miniers de type Mississippi Valley‐Type.
https://hal.archives-ouvertes.fr/tel-01457583

tel-01457583
https://hal.archives-ouvertes.fr/tel-01457583
https://hal.archives-ouvertes.fr/tel-01457583/document
https://hal.archives-ouvertes.fr/tel-01457583/file/th%C3%A8seLaurent2015V2.pdf

Éditeur(s) : HAL CCSD Springer Verlag (Germany)
Résumé : International audience
The influence of magnetic interactions on the anisotropy of magnetic susceptibility (AMS) have been largely studied by several theoretical models or experiments. Numerical models have shown that when magnetostatic interactions occur, the distributions of particles over the volume rather than their individual orientations control the AMS. We have shown recently from a comprehensive rock magnetic study and from a theoretical 2-dimensional (2-D) model that single domain particles closely packed in globule aggregates could produce strong local random interaction magnetic fields which could influence the magnetic susceptibility and decrease the degree of anisotropy. In this paper, we first present in detail this 2-D theoretical model and then we extend it to the 3-D case. The possible distribution function of the magnetostatic interaction fields comprises two extreme states: it is either isotropic or ordered. The former case corresponds to the thermal-demagnetized state while the second case corresponds to the alternating field (AF) demagnetized state. We show that when easy axes of magnetization are not uniformly distributed, the degree of anisotropy decreases as the interaction field increases in both AF- and thermal-demagnetized states in 2-D and 3-D geometry. Thus we conclude that random magnetic fields generated by a random arrangement of magnetic particles over the sample volume decrease the degree of anisotropy of AMS and may alter the magnetic fabric.
ISSN: 0039-3169

hal-00758113
https://hal.archives-ouvertes.fr/hal-00758113
https://hal.archives-ouvertes.fr/hal-00758113/document
https://hal.archives-ouvertes.fr/hal-00758113/file/SGEG-2012-HAL.pdf
DOI : 10.1007/s11200-010-9097-7

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
This paper presents a new balanced structural cross-section of the Jaca thrust-sheet-top basin of the southern Pyrenees combined with paleo-thermometry and apatite fission track (AFT) thermochronology data. The cross-section, based on field data and interpretation of industrial seismic reflection profiles, allows refinement of previous interpretations of the south-directed thrust system, involving the identification of new thrust faults, and of the kinematic relationships between basement and cover thrusts from the middle Eocene to the early Miocene. AFT analysis shows a southward decrease in the level of fission track resetting, from totally reset Paleozoic rocks and lower Eocene turbidites (indicative of heating to Tmax > ~120 °C), to partially reset middle Eocene turbidites and no/very weak resetting in the upper Eocene-lower Oligocene molasse (Tmax < ~60 °C). AFT results indicate a late Oligocene-early Miocene cooling event throughout the Axial Zone and Jaca Basin. Paleo-maximum temperatures determined by vitrinite reflectance measurements and Raman spectroscopy of carbonaceous material reach up to ~240 °C at the base of the turbidite succession. Inverse modelling of AFT and vitrinite reflectance data with the QTQt software for key samples show compatibility between vitrinite-derived Tmax and the AFT reset level for most of the samples. However, they also suggest that the highest temperatures determined in the lowermost turbidites correspond to a thermal anomaly rather than burial heating, possibly due to fluid circulation during thrust activity. From these results, we propose a new sequential restoration of the south Pyrenean thrust system propagation and related basin evolution.
ISSN: 0278-7407

insu-01312746
https://hal-insu.archives-ouvertes.fr/insu-01312746
https://hal-insu.archives-ouvertes.fr/insu-01312746/document
https://hal-insu.archives-ouvertes.fr/insu-01312746/file/Labaume_et_al-2016-Tectonics.pdf
DOI : 10.1002/2016TC004192

Éditeur(s) : HAL CCSD Annual Reviews
Résumé : International audience
The record of the continental lithosphere is patchy and incomplete; no known rock is older than 4.02 Ga, and less than 5% of the rocks preserved are older than 3 Ga. In addition, there is no recognizable mantle lithosphere from before 3 Ga. We infer that there was lithosphere before 3 Ga and that ∼3 Ga marks the stabilization of blocks of continental lithosphere that have since survived. This was linked to plate tectonics emerging as the dominant tectonic regime in response to thermal cooling, the development of a more rigid lithosphere, and the recycling of water, which may in turn have facilitated plate tectonics. A number of models, using different approaches, suggest that at 3 Ga the volume of continental crust was ∼70% of its present-day volume and that this may be a minimum value. The continental crust before 3 Ga was on average more mafic than that generated subsequently, and this pre-3 Ga mafic new crust had fractionated Lu/Hf and Sm/Nd ratios as inferred for the sources of tonalite-trondhjemite-granodiorite and later granites. The more intermediate composition of new crust generated since 3 Ga is indicated by its higher Rb/Sr ratios. This change in composition was associated with an increase in crustal thickness, which resulted in more emergent crust available for weathering and erosion. This in turn led to an increase in the Sr isotope ratios of seawater and in the drawdown of CO2. Since 3 Ga, the preserved record of the continental crust is marked by global cycles of peaks and troughs of U-Pb crystallization ages, with the peaks of ages appearing to match periods of supercontinent assembly. There is increasing evidence that the peaks of ages represent enhanced preservation of magmatic rocks in periods leading up to and including continental collision in the assembly of supercontinents. These are times of increased crustal growth because more of the crust that is generated is retained within the crust. The rates of generation of continental crust and mantle lithosphere may have remained relatively constant at least since 3 Ga, yet the rates of destruction of continental crust have changed with time. Only relatively small volumes of rock are preserved from before 3 Ga, and so it remains difficult to establish which of these are representative of global processes and the extent to which the rock record before 3 Ga is distorted by particular biases.
ISSN: 0084-6597

hal-01622692
https://hal.archives-ouvertes.fr/hal-01622692
DOI : 10.1146/annurev-earth-063016-020525

Éditeur(s) : Elsevier Science Bv
Résumé : In the South Gabon Basin, deep multi-channel seismic reflection and gravity modeling analysis have shed light on key features of the structure of the margin. The thinned continental crust beneath the Gabon Margin appears to be composed of two distinct layers, separated by a clear, strong and more or less continuous reflector running in the 7–10 s TWT window. The lower crust is characterized by a higher density, intermediate between the lower values of the upper crust and the denser values of the mantle. The lower crust is irregularly shaped and presents lateral thickness variations along the direction of thinning and along the coast. In the offshore thinned continental domain, the lower and upper crust form a 20–25 km thick body. Crustal thicknesses point to a relatively sharp and narrow transition, along a few tens of kilometers, between the unthinned and the thinned continental crust. The high density layer identified offshore Gabon presents similar characteristics in density, geometry and spatial distribution, as the underplated magmatic bodies observed along volcanic margins, e.g. along the South Atlantic Namibia Margin or the North Atlantic Vøring Margin. Although this lower crustal body could possibly represent ultra mafic serpentinized rocks or high grade metamorphic crustal rocks, we suggest that it could be composed of mafic rocks. Magmas resulting from partial melting during rifting may underplate the crust and/or be intruded in the lower crust through a system of dykes and sills. In this view, the present-day crustal thicknesses along rifted margins, characterized by magmatic underplating and/or intrusion, are not representative of the thinning that the crust experienced during rifting. Results of this study point to relatively shallow sedimentary basins along the South Gabon Margin. The deepest offshore depocenters located under the westernmost side of the continental platform appear to be associated with the deepest syn-rift basins These basins seem to extend along 20 to 40 km in the ~ NE–SW direction with a present-day average thickness of 7.3 km. Offshore Gabon, whereas the crustal thinning appears significant, the syn-rift deposit are not thick. We suggest that the area was anomalously uplifted during the rifting phase, due to an elevated thermal lithospheric gradient. The conclusions derived from our seismic and gravity analysis are consistent with the implications such a thermal anomaly would have on the tectonic evolution of a rifted margin with 1) an underplated high density lower crustal layer, 2) shallow depth syn-rift basins associated with a relatively thin crust and subsequently 3) elevated recorded subsidence rates in the initial post-rift stages. Research Highlights ► The Gabon Margin appears characterized by an underplated high density lower crustal layer. ► Shallow depth syn-rift basins are associated with a relatively thin crust. ► Seismic and gravity analysis points to an anomalous uplift of the Gabon Margin during the rifting phase. ► Crustal structure, syn-rift infill and post-rift subsidence are consistent an uplift of the Gabon Margin during the rifting phase. ► The uplift of the Gabon Margin is possibly due to an elevated thermal lithospheric gradient.
Tectonophysics (0040-1951) (Elsevier Science Bv), 2011-06 , Vol. 506 , N. 1-4 , P. 31-45

Droits : 2011 Elsevier B.V. All rights reserved.
http://archimer.ifremer.fr/doc/00039/15020/12347.pdf
DOI:10.1016/j.tecto.2011.04.009
http://archimer.ifremer.fr/doc/00039/15020/

Éditeur(s) : HAL CCSD Geological society of London
Résumé : International audience
We present a synthesis of the tectonic and thermochronological evolution of the Eastern Tibet since the Triassic. The long-term cooling histories obtained on magmatic and metamorphic rocks of the South Songpan-Garze--, Kunlun and Yidun blocks are similar showing a very slow and regular cooling during Late Jurassic and Cretaceous, confirming the suspected lack of major tectonic events between c. 150 and 30 Ma. The exhumation linked to the Tertiary growth of the Tibetan Plateau initiated around 30 Ma and concentrates at the vicinity of the major tectonic structures. Exhumation rates increased again from about 7 Ma in the Longmen Shan. To interpret this very slow cooling rate between Late Jurassic and Early Cenozoic from granites of this area, we use a simple 1D thermal model that takes into account the thermal properties of both sediments and crust. The results suggest that: (1) high temperature (500 8C) can be kept over a long period of time; (2) during Cretaceous, cooling is mostly controlled by the thermal properties of sediments of continental origin; and (3) the initial Late Triassic rapid cooling rate was caused by the large thermal contrast between the granite body and the sedimentary rocks rather than by a high exhumation rate.
Growth and Collapse of the Tibetan Plateau

insu-00610491
https://hal-insu.archives-ouvertes.fr/insu-00610491
DOI : 10.1144/SP353.2

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The origin of plate tectonics is one of the most fundamental issues in earth and planetary sciences. Laboratory experiments indicate that the viscosity of silicate rocks is so strongly temperature-dependent that the entire surface of the Earth should be one immobile rigid plate. The rheology of oceanic lithosphere is, however, still poorly understood, and there exist few constraints on the temperature dependency of viscosity on the field scale. Here we report a new kind of observational constraint based on the geoid along oceanic fracture zones. We identify a large number of conspicuous small-scale geoid anomalies, which cannot be explained by the standard evolution model of oceanic lithosphere, and estimate their source density perturbations using a new Bayesian inversion method. Our results suggest that they are caused most likely by small-scale convection involving temperature perturbations of ∼300 K±100 K∼300 K±100 K. Such thermal contrast requires the activation energy of mantle viscosity to be as low as View the MathML source100±50 kJmol−1 in case of diffusion creep, and View the MathML source225±112 kJmol−1 in case of dislocation creep, substantially reducing the thickness of the stiffest part of oceanic lithosphere. Oceanic lithosphere may thus be broken and bent much more easily than previously thought, facilitating the operation of plate tectonics.
ISSN: 0012-821X

hal-01467827
https://hal.archives-ouvertes.fr/hal-01467827
DOI : 10.1016/j.epsl.2016.05.027

Éditeur(s) : HAL CCSD BioMed Central
Résumé : International audience
ABSTRACT: BACKGROUND: Climate change poses unprecedented challenges, ranging from global and local policy challenges to personal and social action. Heat-related deaths are largely preventable, but interventions for the most vulnerable populations need improvement. Therefore, the prior identification of high risk areas at the community level is required to better inform planning and prevention. We aimed to demonstrate a simple and flexible conceptual framework relying upon satellite thermal data and other digital data with the goal of easily reproducing this framework in a variety of urban configurations. RESULTS: The study area encompasses Rennes, a medium-sized French city. A Landsat ETM + image (60 m resolution) acquired during a localized heatwave (June 2001) was used to estimate land surface temperature (LST) and derive a hazard index. A land-use regression model was performed to predict the LST. Vulnerability was assessed through census data describing four dimensions (socio-economic status, extreme age, population density and building obsolescence). Then, hazard and vulnerability indices were combined to deliver a heatwave health risk index. The LST patterns were quite heterogeneous, reflecting the land cover mosaic inside the city boundary, with hotspots of elevated temperature mainly observed in the city center. A spatial error regression model was highly predictive of the spatial variation in the LST (R2 = 0.87) and was parsimonious. Three land cover descriptors (NDVI, vegetation and water fractions) were negatively linked with the LST. A sensitivity analysis (based on an image acquired on July 2000) yielded similar results. Southern areas exhibited the most vulnerability, although some pockets of higher vulnerability were observed northeast and west of the city. The heatwave health risk map showed evidence of infra-city spatial clustering, with the highest risks observed in a north--south central band. Another sensitivity analysis gave a very high correlation between 2000 and 2001 risk indices (r = 0.98, p < 10-12). CONCLUSIONS: Building on previous work, we developed a reproducible method that can provide guidance for local planners in developing more efficient climate impact adaptations. We recommend, however, using the health risk index together with hazard and vulnerability indices to implement tailored programs because exposure to heat and vulnerability do not require the same prevention strategies.
ISSN: 1476-072X

inserm-00762303
http://www.hal.inserm.fr/inserm-00762303
http://www.hal.inserm.fr/inserm-00762303/document
http://www.hal.inserm.fr/inserm-00762303/file/1476-072X-11-38.pdf
DOI : 10.1186/1476-072X-11-38

Éditeur(s) : HAL CCSD
Résumé : National audience
The Lesser Antilles subduction zone has produced no recent strong thrust earthquakes, making it difficult to quantify the seismic hazard from such events. The Lesser Antilles arc has a low subduction rate and an accretionary wedge that is very wide at its southern end. To investigate the effect of the wedge on seismogenesis, numerical models of forearc thermal structure were constructed along six transects perpendicular to the arc in order to determine the thermally predicted width of the seismogenic zone. The geometry of each section is constrained by published seismic profiles and crustal models derived from gravity and seismic data and by earthquake hypocenters at depth. A major constraint on the deep part of the model is that mantle temperature beneath the volcanic arc should achieve a temperature of 1,100°C to generate partial melts. Predicted surface heat flow is compared to the available heat flow observations. Thermal modeling results indicate a systematic southward increase in the width of the seismogenic zone, more than doubling in width from north to south and corresponding to a dramatic southward increase in forearc width (distance from the arc to the deformation front of the accretionary wedge). The minimum width of the seismogenic zone (distance between the intersections of the subduction interface with the 150°C and 350°C isotherms) increases from about 80 km, north of 16°N, to 230 km, at 13°N. The maximum width (between the 100°C and 450°C isotherms) ranges from about 150 km in the north to up to 320 km in the south. This large variation in the width of the seismogenic zone is a consequence of the increasing width of the accretionary wedge to the south, caused by the increased thickness of sediment on the subducting plate. There is good agreement between the thermally predicted seismogenic limits and the sparse distribution of recorded thrust earthquakes, which are observed only in the northern portion of the arc. Possible scenarios for mega-thrust earthquakes are discussed. Depending on the segment length (along-strike) of the rupture plane, the occurrence of an event of magnitude 8-9 cannot be excluded.
Bulletin Société Géologique de France

insu-00814056
https://hal-insu.archives-ouvertes.fr/insu-00814056
DOI : 10.2113/gssgfbull.184.1-2.47

Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
We propose a new thermomechanical numerical model of mid-ocean ridge accretion aimed at investigating asymmetric spreading rates, diverse configurations of lens and sill magma injections, crystallization and depth, and on- and off-axis patterns of hydrothermal cooling. The numerical algorithm iteratively resolves temperature and motion equations until it reaches a stationary solution. The motion equation was written in a vorticity-stream function formalism, with boundary and internal conditions applied to the stream function to impose the style of magma injection. Unlike in previous models, our model does not assume an a priori shape for the temperature field, which is initiated by an initial half-space cooling according to the left and right spreading rates. Complex patterns of hydrothermal cooling are simulated by enhanced thermal diffusivity. The model succeeds in describing the dynamic and thermal effects of spreading rates, the style of magma intrusion, and the hydrothermal cooling. Accurate descriptions of these are essential to study the cooling histories of crustal rocks and geophysical observables.
ISSN: 1525-2027

hal-00413118
https://hal.archives-ouvertes.fr/hal-00413118
DOI : 10.1029/2008GC002270

Éditeur(s) : HAL CCSD
Résumé : Subduction is one of the major geodynamical process active during the Earth evolution. The characterization of arc magmas, their evolution through space and time, and the relationship between arc magmatism and continental crust forming processes, constitute the main research topics in petrology and geochemistry since the last three decades. This study focuses on an exhumed portion of the Kohistan Arc (N Pakistan), which is an exceptional ‘in situ' laboratory to study and follow through time the processes active on subduction zones. Based on a pluri-geochemical approach, this study allows unraveling two major issues : 1/ The lack of a cogenetic relationship between the arc root (i.e. ultramafic rocks) and the overlying gabbroic crustal section. The Jijal ultramafic section does not bear a crustal origin and was emplaced at ~117 Ma via a magma-rock reaction between REE-depleted ‘boninite-like' melts and the pre-existing lithospheric mantle with Indian-MORB affinities; 2/ A three-stage geodynamical model covering the arc evolution through ~30 Ma. This model starts with the onset of the subduction followed by the building of the volcanic arc (1st stage). The 2nd stage corresponds to a major thermal event, characterized by abundant magma underplating and by granulitisation of the arc base. Recycling of the residual/cumulative lower crust into the convective asthenospheric mantle was efficient during this stage, and probably related to thermo-mechanical erosion processes. The last stage, between ~95 and 85 Ma, seals the end of the intra-oceanic subduction and corresponds to an “amagmatic” period. This step is followed by a voluminous, but short, magmatic pulse at ~85 Ma, occurring just before the arc-continent collision. At last, this study emphasizes the more mafic composition of the investigated crustal arc section when compared to the bulk continental crust. Nevertheless the arc section composition nicely fits with the lower continental crust average.
Les zones de subduction représentent des zones d'évolution clés dans la compréhension des processus géologiques majeurs actifs sur notre planète. En particulier, la caractérisation et l'évolution des magmas générés dans les zones d'arcs océaniques et la relation entre leur genèse et les processus de croissance crustale sont des axes primordiaux. Cette étude est focalisée sur la portion d'arc océanique exhumée du Kohistan (Nord Pakistan) qui constitue un laboratoire exceptionnel pour appréhender cette problématique. Basée sur une approche géochimique multi-méthodes (éléments majeurs et en trace, isotopes), cette étude a permis d'établir : 1/ l'absence de relation génétique directe entre les roches ultrabasiques de la racine de l'arc et la section crustale sus-jacente. La formation de la séquence ultrabasique de Jijal se produit à ~117 Ma via une réaction de type magma-roche entre des liquides de type boninitique (appauvris en terres rares), et le manteau lithosphérique de type MORB-Indien ; 2/ un modèle géodynamique en trois stades majeurs résumant l'évolution de l'arc océanique et de la subduction sur une période d'environ 30 Ma. Ce modèle débute par l'initiation de la subduction et la formation de l'arc volcanique s.s. (1er stade) ; le 2ème stade correspond à un évènement thermique majeur. Il est représenté par un sous-placage important de magmas et une granulitisation intense de la base de l'arc. Le recyclage de la croûte inférieure cumulative et résiduelle, dans le manteau sous-jacent, se produit durant cette étape vraisemblablement suite à des processus d'érosion thermo-mécanique. Le dernier stade, entre 95 Ma et 85 Ma, scelle la fin du fonctionnement de la zone de subduction et correspond à une période amagmatique suivie par une brève reprise du magmatisme avant la collision de l'arc après 85 Ma. Enfin, une modélisation numérique comparative avec la croûte continentale globale met en évidence la composition significativement plus basique de la croûte de l'arc insulaire du Kohistan. De fortes similitudes sont en revanche observées entre la section d'arc étudiée et la croûte continentale inférieure.
https://tel.archives-ouvertes.fr/tel-00437770

tel-00437770
https://tel.archives-ouvertes.fr/tel-00437770
https://tel.archives-ouvertes.fr/tel-00437770/document
https://tel.archives-ouvertes.fr/tel-00437770/file/thesedhuime.pdf

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
This paper aims to present an overview on the influence of rheological heterogeneity and mechanical anisotropy on the deformation of continents. After briefly recapping the concept of rheological stratification of the lithosphere, we discuss two specific issues: (1) as supported by a growing body of geophysical and geological observations, crust=mantle mechanical coupling is usually efficient, especially beneath major transcurrent faults which probably crosscut the lithosphere and root within the sublithospheric mantle; and (2) in most geodynamic environments, mechanical properties of the mantle govern the tectonic behaviour of the lithosphere. Lateral rheological heterogeneity of the continental lithosphere may result from various sources, with variations in geothermal gradient being the principal one. The oldest domains of continents, the cratonic nuclei, are characterized by a relatively cold, thick, and consequently stiff lithosphere. On the other hand, rifting may also modify the thermal structure of the lithosphere. Depending on the relative stretching of the crust and upper mantle, a stiff or a weak heterogeneity may develop. Observations from rift domains suggest that rifting usually results in a larger thinning of the lithospheric mantle than of the crust, and therefore tends to generate a weak heterogeneity. Numerical models show that during continental collision, the presence of both stiff and weak rheological heterogeneities significantly influences the large-scale deformation of the continental lithosphere. They especially favour the development of lithospheric-scale strike-slip faults, which allow strain to be transferred between the heterogeneities. An heterogeneous strain partition occurs: cratons largely escape deformation, and strain tends to localize within or at the boundary of the rift basins provided compressional deformation starts before the thermal heterogeneity induced by rifting are compensated. Seismic and electrical conductivity anisotropies consistently point towards the existence of a coherent fabric in the lithospheric mantle beneath continental domains. Analysis of naturally deformed peridotites, experimental deformations and numerical simulations suggest that this fabric is developed during orogenic events and subsequently frozen in the lithospheric mantle. Because the mechanical properties of single-crystal olivine are anisotropic, i.e. dependent on the orientation of the applied forces relative to the dominant slip systems, a pervasive fabric frozen in the mantle may induce a significant mechanical anisotropy of the whole lithospheric mantle. It is suggested that this mechanical anisotropy is the source of the so-called tectonic inheritance, i.e. the systematic reactivation of ancient tectonic directions; it may especially explain preferential rift propagation and continental break-up along pre-existing orogenic belts. Thus, the deformation of continents during orogenic events results from a trade-off between tectonic forces applied at plate boundaries, plate geometry, and the intrinsic properties (rheological heterogeneity and mechanical anisotropy) of the continental plates.
ISSN: 0040-1951

hal-01389719
http://hal.univ-reunion.fr/hal-01389719
http://hal.univ-reunion.fr/hal-01389719/document
http://hal.univ-reunion.fr/hal-01389719/file/vauchez_etal_rheology_1998_hal.pdf
DOI : 10.1016/S0040-1951(98)00137-1

Éditeur(s) : HAL CCSD American Geophysical Union - AGU
Résumé : IODP Expedition 335 "Superfast Spreading Rate Crust 4" returned to ODP Hole 1256D with the intent of deepening this reference penetration of intact ocean crust several hundred meters into cumulate gabbros. This was the fourth cruise of the superfast campaign to understand the formation of oceanic crust accreted at fast spreading ridges, by exploiting the inverse relationship between spreading rate and the depth to low velocity zones seismically imaged at active mid-ocean zones, thought to be magma chambers. Site 1256 is located on 15-million-year-old crust formed at the East Pacific Rise during an episode of superfast ocean spreading (>200 mm/yr full rate). Three earlier cruises to Hole 1256D have drilled through the sediments, lavas and dikes and 100 m into a complex dike-gabbro transition zone. The specific objectives of IODP Expedition 335 were to: (1) test models of magmatic accretion at fast spreading ocean ridges; (2) quantify the vigor of hydrothermal cooling of the lower crust; (3) establish the geological meaning of the seismic Layer 2-3 boundary at Site 1256; and (4) estimate the contribution of lower crustal gabbros to marine magnetic anomalies. It was anticipated that even a shortened IODP Expedition could deepen Hole 1256D a significant distance (300 m) into cumulate gabbros. Operations on IODP Expedition 335 proved challenging from the outset with almost three weeks spent re-opening and securing unstable sections of the Hole. When coring commenced, the destruction of a hard-formation C9 rotary coring bit at the bottom of the hole required further remedial operations to remove junk and huge volumes of accumulated drill cuttings. Hole-cleaning operations using junk baskets returned large samples of a contact-metamorphic aureole between the sheeted dikes and a major heat source below. These large (up to 3.5 kg) irregular samples preserve magmatic, hydrothermal and structural relationships hitherto unseen because of the narrow diameter of drill core and previous poor core recovery. Including the ~60 m-thick zone of granoblastic dikes overlying the uppermost gabbro, the dike-gabbro transition zone at Site 1256 is over 170 m thick, of which more than 100 m are recrystallized granoblastic basalts. This zone records a dynamically evolving thermal boundary layer between the principally hydrothermal domain of the upper crust and a deeper zone of intrusive magmatism. The recovered samples document a sequence of evolving geological conditions and the intimate coupling between temporally and spatially intercalated intrusive, hydrothermal, contact-metamorphic, partial melting and retrogressive processes. Despite the operational challenges, we achieved a minor depth advance to 1522 m, but this was insufficient penetration to complete any of the primary objectives. However, Hole 1256D has been thoroughly cleared of junk and drill cuttings that have hampered operations during this and previous Expeditions. At the end of Expedition 335, we briefly resumed coring and stabilized problematic intervals with cement. Hole 1256D is open to its full depth and ready for further deepening in the near future.
InterRidge News

hal-00688821
https://hal.archives-ouvertes.fr/hal-00688821

Éditeur(s) : Public Library Science
Résumé : Global change and its associated temperature increase has directly or indirectly changed the distributions of hosts and pathogens, and has affected host immunity, pathogen virulence and growth rates. This has resulted in increased disease in natural plant and animal populations worldwide, including scleractinian corals. While the effects of temperature increase on immunity and pathogen virulence have been clearly identified, their interaction, synergy and relative weight during pathogenesis remain poorly documented. We investigated these phenomena in the interaction between the coral Pocillopora damicornis and the bacterium Vibrio coralliilyticus, for which the infection process is temperature-dependent. We developed an experimental model that enabled unraveling the effects of thermal stress, and virulence vs. non-virulence of the bacterium. The physiological impacts of various treatments were quantified at the transcriptome level using a combination of RNA sequencing and targeted approaches. The results showed that thermal stress triggered a general weakening of the coral, making it more prone to infection, non-virulent bacterium induced an 'efficient' immune response, whereas virulent bacterium caused immuno-suppression in its host.
Plos One (1932-6203) (Public Library Science), 2014-09 , Vol. 9 , N. 9 , P. 1-15

Droits : This is an open-access article, free of all copyright, and may be freely reproduced, distributed, transmitted, modified, built upon, or otherwise used by anyone for any lawful purpose. The work is made available under the Creative Commons CC0 public domain dedication.
http://archimer.ifremer.fr/doc/00221/33265/31738.pdf
DOI:10.1371/journal.pone.0107672
http://archimer.ifremer.fr/doc/00221/33265/

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The thermal evolution of sediments in the shallowest part of sedimentary basins is challenging to investigate as most of the geothermometers are at their application limits. This is typically the case of the Callovian-Oxfordian claystones at the eastern border of the Paris Basin. A recent 2000 m deep well penetrated the entire Jurassic and Triassic sedimentary series and permitted coring of sediments never reached by previous drilling in this part of the basin. Thanks to the use of several independent geothermometers (apatite fission track thermochronology, fluid inclusion microthermometry, clay mineralogy and sedimentary organic matter evolution) the burial history of the Mesozoic series has been reconstructed, modeled and calibrated using kinetic algorithms relevant to the various paleothermometers used. In addition to these conventional methods, an innovative approach was developed using the temperature-dependence of the magnetic mineral assemblage within clay-rich sediments ("MagEval"). Thermal modeling indicates that the Callovian-Oxfordian and the Lower Triassic experienced maximum burial temperatures of 50 +/- 5 C-circle and 90 +/- 10 C-circle respectively, i.e., about 25 C higher than present-day. This temperature offset implies the erosion of several hundred meters of sediments which, depending on the thermal flux and conductivity considered, most likely constituted Upper Cretaceous chalk deposits. Falling sea level resulted in the exposure and subsequent dismantling of the chalk cover at the beginning of Cenozoic times. The eastern border of the basin was then subjected to slow erosion and discrete tectonic deformation.
ISSN: 0264-8172

hal-01313142
https://hal.archives-ouvertes.fr/hal-01313142
DOI : 10.1016/j.marpetgeo.2013.08.019

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Tropical islands are characterized by thermal and orographical forcings which may generate microscale air mass circulations. The Lesser Antilles Arc includes small tropical islands (width lower than 50 km) where a total of one-and-a-half million people live. Air quality over this region is affected by anthropogenic and volcanic emissions, or saharan dust. To reduce risks for the population health, the atmospheric dispersion of emitted pollutants must be predicted. In this study, the dispersion of anthropogenic nitrogen oxides (NOx) is numerically modelled over the densely populated area of the Guadeloupe archipelago under weak trade winds, during a typical case of severe pollution. The main goal is to analyze how microscale resolutions affect air pollution in a small tropical island. Three resolutions of domain grid are selected: 1 km, 333 m and 111 m. The Weather Research and Forecasting model (WRF) is used to produce real nested microscale meteorological fields. Then the weather outputs initialize the Lagrangian Particle Dispersion Model (FLEXPART). The forward simulations of a power plant plume showed good ability to reproduce nocturnal peaks recorded by an urban air quality station. The increase in resolution resulted in an improvement of model sensitivity. The nesting to subkilometer grids helped to reduce an overestimation bias mainly because the LES domains better simulate the turbulent motions governing nocturnal flows. For peaks observed at two air quality stations, the backward sensitivity outputs identified realistic sources of NOx in the area. The increase in resolution produced a sharper inverse plume with a more accurate source area. This study showed the first application of the FLEXPART-WRF model to microscale resolutions. Overall, the coupling model WRF-LES-FLEXPART is useful to simulate the pollutant dispersion during a real case of calm wind regime over a complex terrain area. The forward and backward simulation results showed clearly that the subkilometer resolution of 333 m is necessary to reproduce realistic air pollution patterns in this case of short-range transport over a complex terrain area. Globally, this work contributes to enrich the sparsely documented domain of real nested microscale air pollution modelling. This study dealing with the determination of the proper resolution grid and proper turbulence scheme, is of significant interest to the near-source and complex terrain air quality research community.
ISSN: 1352-2310

hal-01349208
https://hal.archives-ouvertes.fr/hal-01349208
DOI : 10.1016/j.atmosenv.2016.05.028

Éditeur(s) : HAL CCSD American Society of Mechanical Engineers
Résumé : International audience
The isothermal flow in a model channel of plate-fin heat exchanger with periodically arranged embossed-like vortex generators is investigated. Velocity measurements are performed by LDA in the transitional regime (Reynolds number from 1000 up to 5000). Strong longitudinal vortices are observed downstream of each generator. The vortex roll-up process is highlighted by the evolution of the velocity vector field in the cross section of the flow. The modifications of the vortex characteristics after successively encountered generators are investigated. This work shows most of the flow features which are known to produce heat transfer enhancement, and shows that these smooth shaped vortex generators are very promising for enhanced heat exchangers.
ISSN: 0098-2202

hal-01582938
https://hal.archives-ouvertes.fr/hal-01582938
https://hal.archives-ouvertes.fr/hal-01582938/document
https://hal.archives-ouvertes.fr/hal-01582938/file/Dupont_heat_exchanger_JFE2002_preprint.pdf
DOI : 10.1115/1.1595675