Éditeur(s) : HAL CCSD
Résumé : Differentiation of the lithospheric mantle occurred principally through partial melting and extraction of melts. Harzburgites are generally considered as melting residues whereas lherzolites are regarded as pristine mantle weakly affected by melting. However, some orogenic peridotites show evidence of igneous refertilization. In this context, this work re-investigates the nature of the Lherz lherzolites (Pyrenees), type-locality of lherzolites, described as a piece of preserved fertile mantle. Structural and geochemical data show that these lherzolites are not pristine but formed through a refertilization reaction between MORB-like melts and refractory lithosphere. Moreover, the Lherz peridotites were partly used to infer the composition of the primitive upper mantle and these results may have important implications for the nature of the late veneer. Additionally, crystal-preferred orientations of minerals (CPO) highlight a strong feedback between melt percolation and finite strain in the percolated rocks. CPO variations are ruled by a subtle balance between instantaneous melt fraction and local strain rate. This work also investigated the effect of melt percolation on Hf, Nd and Sr isotopes. Isotope systematics in Lherz shows that strong isotopic decoupling may arise in a percolation front. The modelling suggests that decoupled isotopic signatures are generated during porous flow and governed by the melt/matrix elements concentrations, chemical diffusivities or efficiency of isotopic homogenization. Melt-rock interactions can generate “intraplate-like” isotopic signatures. This suggests that a part of isotopic signatures of mantle-related rocks could be generated by diffusional processes associated with melt transport.
La différenciation du manteau lithosphérique s'est principalement effectuée par fusion partielle et extraction de magmas. Les harzburgites sont généralement considérées comme des résidus de fusion tandis que les lherzolites représentent un manteau originel peu affecté par la fusion. Cependant, certaines péridotites orogéniques montrent des évidences de refertilisation magmatique. Dans ce contexte, ce travail remet en cause la nature primitive des lherzolites de Lherz (Pyrénées), lithotype de la lherzolite. Les données structurales et géochimiques montrent que ces lherzolites ne représentent pas du manteau préservé mais qu'elles se sont formées par une réaction de refertilisation entre un liquide de type MORB et une lithosphère réfractaire. De plus, les orientations préférentielles de réseau (OPR) des minéraux montrent une forte interdépendance entre la percolation magmatique et la déformation finie observée dans les roches percolées. Les variations d'OPR semblent contrôlées par un équilibre subtil entre fraction de liquide instantanée et taux de déformation local. Ce travail a également abordé les effets de la percolation magmatique sur la variabilité isotopique des roches mantelliques. Les résultats montrent qu'un fort découplage isotopique peut s'observer dans un front de percolation. Les modèles suggèrent que le découplage des signatures isotopiques se produit pendant la percolation, gouverné par le rapport des concentrations en éléments (magma/matrice), la diffusivité et le processus d'homogénéisation isotopique. Les réactions magma/roche peuvent générer des signatures isotopiques de type intraplaque. Ceci suggère qu'une part des signatures isotopiques des roches ou laves dérivées du manteau pourrait être produite par des processus diffusionnels associés à du transport de magma.
https://tel.archives-ouvertes.fr/tel-00431325

tel-00431325
https://tel.archives-ouvertes.fr/tel-00431325
https://tel.archives-ouvertes.fr/tel-00431325/document
https://tel.archives-ouvertes.fr/tel-00431325/file/theseleroux08.pdf

Résumé : Bacteriological study of abyssal sediments: During the Demeraby mission of the N/O Jean Charcot in the western Atlantic Ocean, a study of the microflora of the digestive tracts of echinoderms (Holothuroidea of various genera, Asteroidea, Echinoidea) was compared with that of the surrounding sediment. The bacterial concentration observed in the digestive tracts of all the animals studied is higher than that in the surrounding sediments. The largest numbers were always found in the most anterior part of the digestive tracts of the holothurians. In some cases, the increase is considerable (7.10 versus 5.2. 10 cells per millilitre): It indicates a proliferation of bacterial cells in the anterior part of the digestive tract. As the sediment moves through the digestive tract, the bacterial level progressively decreases. In the most posterior part, the concentration is, however, always clearly greater than that in the surrounding sediment. In the case of the holothurian of the genus Deima, analysis according to the Adamsonian principle of comparison shows that the microflora isolated from the various parts of the digestive tract is composed of taxonomic groups showing little resemblance to those isolated from the sediment. In the case of the holothurian of the genus Pseudostichopus, no specialisation of the microflora from digestive tract contents appears with respect to that of the ingested sediment. Examination of metabolic activities suggests a juxtaposition of two types of communities: Free sediment - sediment in transit that complement one other in their enzymatic and nutritional behaviour Indeed, the strains of free sediment seem to be rather suitable for hydrolysing and using carbohydrates, while those of enteric communities prefer the hydrolysis of lipids and proteins and the assimilation of fatty acids, dicarboxylic acids, hydroxylic acids and certain amino acids. Moreover, the enteric microflorae possess a greater nutritional versatility that, linked with its total numbers, has a sizeable catabolic potential. .../... -2- Measurements of heterotrophic activity done by means of 14 C glucose tracers make it possible to show that the metabolic activities of the bacterial communities of superficial abyssal sediments vary according to zones. In the Amazon Cone, a clear glucose mineralization gradient over a distance of a few kilometres can be observed. In the abyssal plain of Demerara heterotrophic activities are slowed in relation to those of the superficial sediments of the Cone of the Amazon, even though the bacterial numbers and the depths are of the same order of magnitude in the two zones. The abundant microflorae associated with the various divisions of digestive tract contents of the Deima abyssal holothurian manifest little metabolic activity as regards the glucose. However, the bacterial communities of Pseudostichopus and Psychropotes manifest very strong heterotrophic activities, increasing from the oesophagus towards the cloaca. Current results are too fragmentary to allow us to observe possible physiological specialisation of enteric bacterial communities enabling the facilitation of digestion processes in the host. Conclusion: In the abyssal environment, characterised by poorly developed bacterial communities, microflorae associated with the digestive tract contents of echinoderms have considerably greater cellular concentrations. By means of their enzymatic equipment, these enteric communities, which complement those of the free microflorae of superficial sediments, can participate in the transformation of organic matter in the abyssal area. Study of the dynamics of microbial communities and their heterotrophic activities in shellfish farms: From experiments done on the water in the Arcachon basin, trials to quantify and describe the reactivity potential of bacterial communities were performed. Bacterial communities were defined by direct counts, counts after setting them up for cultivation, structure and diversity of these communities, dosage of AMP, ADP, ATP. Two opposite ecological conditions were considered: Autumn conditions (high temperature) and a winter conditions (low temperature). Tubs of sea water of 6 and 60 litres were enriched either with ammonium chloride or a mixture of amino acids, at about 500 uAtg N.L. The experiments lasted 24 hours, with sampling every 3 hours. The autumn community reacted rapidly (6 hours), the response to the enrichment in organic nitrogen being the highest. The structure of the community has unstable immature stages. On the contrary, during the winter experiment, no response could be perceived. This may mean that the latency phase is greater than 24 hours. The structure of this community has mature stages. In conclusion, bacterial communities react in the same way as macroscopic communities. Stable communities are diversified and correspond to mature stages of the ecosystem; the immature stages are unstable and less diversified. This type of experiment has made it possible to bring to light the rapidity of response of bacterial populations, and can be used to define the stability of a bacterial community in a precise biotope.
ETUDE BACTERIOLOGIQUE DES SEDIMENTS ABYSSAUX RESUME Au cours de la mission DEMERABY du n/o Jean CHARCOT en atlantique occidental , une étude de la microflore des tractus digestifs d'Echinodermes (Holothurides de différents genres, Astérides, Echinides) a été comparée à celle du sédiment environnant. La concentration bactérienne observée dans les tractus digestifs de tous les animaux étudiés est supérieure à celle des sédiments environnants. Les effectifs les plus importants sont toujours observés dans la partie la plus antérieure des tractus digestifs des holothuries. Dans certains cas, l'accroissement est considérable (7.10 contre 5,2. 10 cellules/ml) : il indique une prolifération des cellules bactériennes dans la partie antérieure du tractus digestif. Au.cours de la progression du sédiment dans le tractus digestif, la charge bactérienne décroit progressivement. Dans la partie la plus postérieure, la concentration est cependant toujours nettement supérieure à celle du sédiment environnant-. Dans le cas d'une holothurie du genre Deima, l'analyse selon le principe adansonien de comparaison montre que la microflore isolée des différentes parties du tractus digestif est constituée de groupes taxonomiques présentant peu de ressemblance avec ceux isolés du sédiment. Dans le cas d'une holothurie du genre Pseudostichopus il n'apparait pas de spécialisation de la microflore du contenu du tractus digestif par rapport à celle du sédiment ingéré. ¿ ¿ . L'étude des activités métaboliques suggère une juxtaposition de deux types de communautés : sédiment libre-sédiment en transit qui se complètent dans leur comportement enzymatique et nutritionnel. En effet les souches du sédiment libre semblent être plutôt aptes à hydrolyser et à utiliser les glucides, tandis que celles des communautés entériques portent leur préférence sur l'hydrolyse des lipides et protéines et 1'assimilation des acides gras, acides dicarboxyl iques, hydro'xy-acides et certains acides aminés. D'autre part les microflores entériques possèdent une versatilité nutritionnelle plus importante qui, liée à leurs effectifs, offre une potentialité catabolique non négligeable. .../... -2- Les mesures d'activité hétérotrophe effectuées au moyen de traceurs glucose 14 C permettent de montrer que les activités métaboliques des communautés bactériennes des sédiments abyssaux superficiels varient selon les zones. Dans le Cone de l'Amazone on observe un net gradient de minéralisation du glucose sur une distance de quelques kilomètres. Dans la plaine abyssale de Demerara les activités hétérotrophessont ralenties par rapport à celles des sédiments superficiels du Cone de l'Amazone, bien que les effectifs bactériens et les profondeurs soient du même ordre de grandeur dans ces deux zones. Les abondantes microflores associées aux différentes fractions du contenu du tractus digestif de l'holothurie abyssale Deima ne manifestent que peu d'activités métaboliques vis à vis du glucose. Par contre les communautés . bactériennes de Pseudostichopus et P syahropotes manifestent des activités hétérotrophes très fortes, croissant de 1'oesophage vers le cloaque. Les résultats actuels sont trop fragmentaires pour permettre d'observer une éventuelle spécialisation physiologique des communautés bactériennes entëriques permettant de faciliter les processus de digestion chez l'hôte. Conclusion: dans le milieu abyssal, caractérisé par des communautés bactériennes faiblement développées, les microflores associées aux contenus de tractus digestif des Echinodermes présentent des concentrations cellulaires considérablement plus importantes. Par leurs équipements enzymâtiques ces communautés entëriques complémentaires de ceux des microflores libres des sédiments superficiels, peuvent participer à la transformation des matières organiques du domaine abyssal. ETUDE DE LA DYNAMIQUE DES COMMUNAUTES MICROBIENNES ET DE LEURS ACTIVITES HETEROTROPHES DANS LES PARCS CONCHYLICOLES RESUME A partir d'expérimentations effectuées sur l'eau du bassin d'Arcachon, des essais de quantification et qualification du potentiel de réactivité des communautés bactériennes ont été effectuées. Les communautés bactériennes ont été définies par comptage directs, comptages après mise en culture, structure et diversité de ces communautés, dosage des AMP, ADP, ATP. Deux situations écologiques opposées ont étées considérées . Une situation automnale (température élevée) et une situation hivernale (température faible). Des bacs d'eau de mer de 6 et 60 litres ont été enrichis , soit avec du chlorure d'ammonium, soit avec un mélange d'acides aminés, à environ 500 uAtg N.l" . Les expériences ont duré 24 heures, avec des prélèvements toutes les 3 heures. La communauté automnale réagit rapidement (6 heures), la ' réponse à l'enrichissement en azote organique étant la plus importante. La structure de la communauté présente des stades immatures instables. Au contraire, au cours de l'expérimentation hivernale, aucune réponse n'a pu être perçue. Ceci peut signifier que la phase de latence est supérieure à 24 heures. La structure . de cette communauté présente des stades matures. En Conclusion, les communautés bactériennes réagissent de la même façon que les communautés macroscopiques. Les communautés stables sont diversifiées et correspondent à des stades matures de l'écosystème, les stades immatures sont instables et moins diversifiés. Ce type d'expérience a permi de mettre en évidence la rapidité de réponse des populations bactériennes, et peut être utilisé pour définir la stabilité d'une communauté bactérienne dans un biotope précis.

Droits : info:eu-repo/semantics/openAccess
http://archimer.ifremer.fr/doc/1981/rapport-1926.pdf
http://archimer.ifremer.fr/doc/00000/1926/

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
Sensitive instruments like strainmeters and tiltmeters are necessary for measuring slowly varying low amplitude Earth deformations. Nonetheless, laser and fibre interferometers are particularly suitable for interrogating such instruments due to their extreme precision and accuracy. In this paper, a practical design of a simple pendulum borehole tiltmeter based on laser fibre interferometric displacement sensors is presented. A prototype instrument has been constructed using welded borosilicate with a pendulum length of 0.85 m resulting in a main resonance frequency of 0.6 Hz. By implementing three coplanar extrinsic fibre Fabry-Perot in-terferometric probes and appropriate signal filtering, our instrument provides tilt measurements that are insensitive to parasitic deformations caused by temperature and pressure variations. This prototype has been installed in an underground facility (Rustrel, France) where results show accurate measurements of Earth strains derived from Earth and ocean tides, local hydro-logic effects, as well as local and remote earthquakes. The large dynamic range and the high sensitivity of this tiltmeter render it an invaluable tool for numerous geophysical applications such as transient fault motion, volcanic strain and reservoir monitoring.
ISSN: 0956-540X

hal-01265967
https://hal.archives-ouvertes.fr/hal-01265967
https://hal.archives-ouvertes.fr/hal-01265967/document
https://hal.archives-ouvertes.fr/hal-01265967/file/HCS1.pdf
DOI : 10.1093/gji/ggv358

Éditeur(s) : HAL CCSD Wiley
Résumé : International audience
The fitness landscapethe mapping between genotypes and fitnessdetermines properties of the process of adaptation. Several small genotypic fitness landscapes have recently been built by selecting a handful of beneficial mutations and measuring fitness of all combinations of these mutations. Here, we generate several testable predictions for the properties of these small genotypic landscapes under Fisher's geometric model of adaptation. When the ancestral strain is far from the fitness optimum, we analytically compute the fitness effect of selected mutations and their epistatic interactions. Epistasis may be negative or positive on average depending on the distance of the ancestral genotype to the optimum and whether mutations were independently selected, or coselected in an adaptive walk. Simulations show that genotypic landscapes built from Fisher's model are very close to an additive landscape when the ancestral strain is far from the optimum. However, when it is close to the optimum, a large diversity of landscape with substantial roughness and sign epistasis emerged. Strikingly, small genotypic landscapes built from several replicate adaptive walks on the same underlying landscape were highly variable, suggesting that several realizations of small genotypic landscapes are needed to gain information about the underlying architecture of the fitness landscape.
ISSN: 0014-3820

hal-01544760
https://hal.archives-ouvertes.fr/hal-01544760
DOI : 10.1111/evo.12545

Résumé : L’objet de cette thèse est l’étude des comportements mécanique et à la corrosion d’un nouveau système de fondation, dit pieux SPIRMEC, adapté aux structures légères. Le travail s’est focalisé sur deux grands aspects. Le premier aspect concerne l’analyse du comportement sous chargement axiale des pieux SPIRMEC sur la base de l’expérimentation et de la modélisation numérique dans un sol mou non cohésif. Quant au deuxième aspect, il traite du problème de la corrosion de l’acier constituant le pieu dans un environnement tropical humide. Le comportement des pieux SPIRMEC sous une charge axiale de traction, dans un sol fin non cohésif, a montré le développement d’une surface cylindrique de rupture. Celle-ci ne dépend pas de la configuration géométrique des pieux tel que : l’espacement S, le diamètre d’hélice Dh et le diamètre du tube d. En adoptant ce critère de rupture et à l’aide d’une analyse statistique des données, nous avons proposé quatre méthodes analytiques de prédiction de la capacité portante des pieux SPIRMEC à partir des essais in-situ et au laboratoire qui sont: •Méthode CPT basée sur la résistance de pointe pénétromètrique (essai CPT), •Méthode MPT basée sur la pression limite pressiomètrique (essai MPT), •Méthode du couple d’installation, •Méthode analytique basée sur les paramètres de cisaillement de sol notamment l’angle de frottement interne (essais triaxial et boîte de cisaillement). Ces méthodes tiennent compte de la géométrie du pieu, du procédé de mise en oeuvre et de la compacité du sol. L’analyse de performance des méthodes proposées a montré que les méthodes analytique et CPT représentent mieux le comportement des pieux testés. La modélisation numérique du comportement des pieux SPIRMEC sous charge axiale de traction a été également étudiée à l’aide du code de calcul Plaxis 2D. Un modèle axisymétrique a été adopté pour modéliser la géométrie de la structure. Le modèle de comportement hardening soil a été retenu pour modéliser le comportement élastoplastiq des couches de sol. Un modèle élastique linéaire a été retenu pour le pieu. Quant au comportement de l’interface sol-structure, il a été pris en compte par un modèle élastoplastique basé sur les critères de Mohr-Coulomb. L’expansion du sol résultant de l’installation des pieux a été approchée par une cavité cylindrique. Cette dernière a été modélisée par des déformations volumiques anisotropes. Nous avons constaté, qu’appliquer une déformation volumique de l’ordre de 40% permet une bonne concordance entre les résultats numériques et expérimentaux. L’étude paramétrique nous a également permis de constater l’existence d’une variation linéaire entre la capacité portante et l’espacement S. Le comportement de l’acier galvanisé dans le sol a été également étudié au moyen de trois approches: électrochimique, visuelles grâce au microscope électronique et gravimétrique. Les tests électrochimiques de corrosion du zinc ont été réalisés dans la solution de sol artificielle pour deux périodes bien distinctes : saison des pluies et après 8 mois de contact sol-pieu. Une forte dépendance est constatée de la vitesse de corrosion de zinc au pH et à la conductivité de la solution. La vitesse de corrosion est plus importante en saison des pluies qu’après 8 mois de contact de pieu avec le sol. Les fortes concentrations en sulfates semblent augmenter la vitesse de corrosion. Les analyses menées au MEB montrent que la zone de fluctuation de nappe et en surface externe (sol/air) sont les zones les plus corrodées. La comparaison entre les différentes techniques d’évaluation de la vitesse de corrosion a montré que l’eau de nappe peut être utilisée comme un milieu représentatif du profil chimique d’un sol non cohésif et légèrement granulaire.
The purpose of this thesis is to study the both behaviors mechanical and of the corrosion of a new foundation system, called spirec piles, for lightweight structures. The work was based on two main aspects. The first aspect concerns the analysis of behavior of the spirmec piles under axial loading on the basis of experimental and numerical modeling in a non-cohesive soft soil. On the second aspect, it addresses the problem of corrosion of steel forming the pile in a humid tropical environment. The behavior of the tested piles under axial traction load, in a non-cohesive soil, showed the development of a cylindrical surface of failure. This does not depend on the geometrical configuration of the tested piles such that: the spacing s, the helix diameter dh and the diameter of the shaft. By adopting this failure criterion and using statistical data analysis, we proposed four analytical methods for predicting the bearing capacity of the piles from in-situ and laboratory tests, which are: cpt method based on tip resistance penetrometer (cpt test), mpt method based on pressuremeter limit pressure (test mpt), method of installation torque and analytical method based on the shear parameters of soil (triaxial tests and shear box). These methods take into account the geometry of the pile, the method and implementation of soil compaction. Performance analysis of the proposed methods showed that the analytical methods and cpt represent better the behavior of piles tested. An axisymmetric condition was assumed to model this geometry in two-dimensional space. In this study, we proposed to model the pipe screw pile with plates elements available in plaxis 2d. The helixes were modeled as circular disks. Interface elements were incorporated along the pile to simulate the soil-pile interaction. Hardening soil model was chosen to describe the soil with drained behavior was assigned for all layers. Linear elastic for pile and elastic plastic model based on the mohr-coulomb criterion was used to describe the interface behavior. The lateral expansion generated by the pile shaft was modeled by anisotropic volumetric strains (ɛxx=ɛzz, ɛyy=0). The pile behavior under tensile loading at different volumetric strains, it is clear that the best fit was obtained at volumetric strain of 40%. The parametric study also allowed us to establish the existence of a linear variation between the bearing capacity and spacings. The behavior of the galvanized steel in the ground has also been studied using three approaches such as: electrochemical, microscopic imaging and gravimetrically. Electrochemical tests of the corrosion of the zinc have been made in artificial soil solution into two periods, the rainy season and after eight months of contact soil-pile. Is a strong dependence of the observed corrosion rate of the zinc at the ph and conductivity of the solution. The corrosion rate is higher in the rainy season compared to eight months of contact of the pile with soil. High sulfate concentrations increase the rate of corrosion. The meb analysis shows that the fluctuation zone of the water table is the most corroded area. Comparison between the different methods of evaluating the corrosion rate showed that the ground water may be used as a representative profile of the chemical environment of a non-cohesive soil and slightly granular.

http://www.theses.fr/2014AGUY0790/document

Éditeur(s) : HAL CCSD Public Library of Science
Résumé : 51 pages; 15figures; 3 tables, accepted for publication in PloS ONE
International audience
We present a study about AFM imaging of living, moving or self-immobilized, bacteria in their genuine physiological liquid medium. No external immobilization protocol, neither chemical nor mechanical, was needed. For the first time, the native gliding movements of Gram-negative Nostoc cyanobacteria upon the surface, at speeds up to 900microns/h, were studied by AFM. This was possible thanks to an improved combination of a gentle sample preparation process and an AFM procedure based on fast and complete force-distance curves made at every pixel, drastically reducing lateral forces. No limitation in spatial resolution or imaging rate was detected. Gram-positive and non-motile R. wratislaviensis bacteria were studied as well. From the approach curves, Young modulus and turgor pressure were measured for both strains at different gliding speeds and are ranging from 20±3 to 105±5MPa and 40±5 to 310±30kPa depending on the bacterium and the gliding speed. For Nostoc, spatially limited zones with higher values of stiffness were observed. The related spatial period is much higher than the mean length of Nostoc nodules. This was explained by an inhomogeneous mechanical activation of nodules in the Nostoc. We also observed the presence of a soft extra cellular matrix (ECM) around the Nostoc. Both strains left a track of polymeric slime with variable thicknesses. For R. wratislaviensis, it is equal to few hundreds of nanometers, likely to promote its adhesion to the sample. While gliding, the Nostoc secretes a slime layer the thickness of which is in the nanometer range and increases with the gliding speed.
ISSN: 1932-6203

hal-00769765
https://hal.archives-ouvertes.fr/hal-00769765
https://hal.archives-ouvertes.fr/hal-00769765v3/document
https://hal.archives-ouvertes.fr/hal-00769765/file/REsubmission_In-situ_determination_Dhahri_Plos_One_R2_Hal.pdf

Éditeur(s) : HAL CCSD Oxford University Press (OUP): Policy P - Oxford Open Option A Oxford University Press (OUP)
Résumé : International audience
While the kinematics of Anatolia plate and the North Anatolian Fault System (NAFS) has been studied extensively, the slip rate and locking depth along the NAFS are usually assumed constant in the analyses due to the lack of sufficient data. This is also partly due to the reasonably good fit of Euler small circle and partly due to the lack of spatial resolution of observations to determine slip rates independently from locking depths. On the other hand, recent geodetic studies show a contrast for locking depth between Marmara and other parts of the NAFS, implying a non-uniform locking depth across the NAFS. In this study, we analyse new GPS data and homogenously combine available data sets covering the eastern part of the NAFS to form the most complete data set. In particular, we incorporate the first results of Turkish Real-Time Kinematic GPS Network (CORS-TR) into our data set. A detailed analysis of three profiles within the NAFS reveals an increase of locking depth in the middle profile to 19.1 ± 3.4 km from 11.9 ± 3.5 km in the easternmost profile while the slip rate is nearly constant (20–22 mm yr−1), which implies a variation of strain rate of ∼100 nanostrain yr−1. Assuming a constant locking depth throughout whole NAFS gives an average locking depth of 14.3 ± 1.7 km. Our best estimates of slip rates in block modelling which takes the variation of locking depths into account are in the range between 22.5 and 22.8 mm yr−1 over eastern part of the NAFS.
ISSN: 0956-540X

hal-01218392
https://hal.archives-ouvertes.fr/hal-01218392
DOI : 10.1093/gji/ggv274

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Most of the plate boundaries are activated obliquely with respect to the direction of far field stresses, as roughly only 8% of the plate boundaries total length shows a very low obliquity (ranging from 0 to 10°, sub-orthogonal to the plate displacement). The obliquity along plate boundaries is controlled by (i) lateral rheological variations within the lithosphere and (ii) consistency with the global plate circuit. Indeed, plate tectonics and magmatism drive rheological changes within the lithosphere and consequently influence strain localization. Geodynamical evolution controls large-scale mantle convection and plate formation, consumption, and re-organization, thus triggering plate kinematics variations, and the adjustment and re-orientation of far field stresses. These geological processes may thus result in plate boundaries that are not perpendicular but oblique to the direction of far field stresses. This paper reviews the global patterns of obliquity along plate boundaries. Using GPlate, we provide a statistical analysis of present-day obliquity along plate boundaries. Within this framework, by comparing natural examples and geological models, we discuss deformation patterns and kinematics recorded along oblique plate boundaries.
ISSN: 0040-1951

hal-01467188
https://hal.archives-ouvertes.fr/hal-01467188
DOI : 10.1016/j.tecto.2016.05.033

Éditeur(s) : HAL CCSD
Résumé : Gravitropism is a major process in vertical growth as it allows the positioning of plant in the gravity field and thus, for trees, it takes part in the light foraging strategies. Without any gravitropism, trees would adopt a weeping habit or fall on the ground due to the increasing with growth supported weight, especially at the advance regeneration stage (sapling stage) in the understorey, where tree are very slender and poorly stiff. Most of the gravitropic studies are made by physiologists in order to understand the process and thus are associated to complex laboratory methods (genetic engineering, anatomical studies, accurate 2D ou 3D measurements of form changes with time). In order to study the ecological relevance and the specific diversity of gravitropic performances in natural forests, we developed a framework that uses different kinds of datas. Synchronical analysis has been done i) at the population level in large sample of trees and ii) at the tree level from destructive measurement of the dissymmetry maturation strains known to be the main motor of the posture control reaction of trees. In both cases, biomechanical models allows to estimate some aspects of the dynamic gravitropic process. Diachronical analysis has been done in natural conditions on permanent plots, or in a more traditional way, by observing in greenhouse experiments the righting movements of plants artificially tilted. In the first case, the problem is the high variability of natural disturbances and the slowness of growth and movements in the dark understorey. The second choice allows a measurement of a capacity (i.e. the ability of the species to react in quite extreme conditions of verticality disturbance but good for growth light and nutrient conditions) that is more easy to analyse, but is maybe not so relevant for estimating the ecological strategy (some species could have developed a high efficience of gravitropic reaction in natural conditions by avoiding the mechanical disturbance or adapting the reaction to slow growth and changing environments in natural conditions). All approaches use the same basic biomechanical modelling, i) to analyse simultaneously the reaction and the disturbance (due to the weight increase) during growth, or ii) to combine different parameters (geometry, growth, weight, maturation strains) involved in shape changes and posture control. They give a classification of the species according to their gravitropic performances. Results on 15 species are discussed, with relation to shade-tolerance or avoidance.
6th Plant Biomechanics Conference
Cayenne, France

hal-00565956
https://hal.archives-ouvertes.fr/hal-00565956

Éditeur(s) : HAL CCSD American Society for Microbiology
Résumé : International audience
Coronaviruses (CoVs) have shown neuroinvasive properties in human and animal secondary to replication in peripheral organ but the mechanism of neuroinvasion is unknown. The major aim of our work was to evaluate the ability of CoVs to enter the central nervous system (CNS) through the blood brain barrier (BBB). Using the high hepatotropic mouse hepatitis virus (MHV) type 3, its attenuated variant 51.6-MHV3, showing low tropism for endothelial cells, and the low hepatotropic MHV-A59 strains from murine coronavirus group, we investigated the viral-induced dysfunctions of BBB in vivo and in brain microvascular endothelial cells (BMECs) in vitro. We report here a MHV strain-specific ability to cross the BBB during acute infection according to their virulence for liver. Brain invasion was only observed in MHV3-infected mice and correlated with enhanced BBB permeability associated with decreased expression of ZO-1, VE-cadherin and occludin but not claudin-5 in the brain or in cultured BMECs. BBB breakdown in MHV3 infection was not related to production of barrier-dysregulating inflammatory cytokines or chemokines by infected BMECs but rather to a downregulation of barrier protective IFN-β production. Our findings highlight the importance of IFN-β production by infected BMECs in preserving BBB function and preventing access of blood-borne infectious viruses to the brain. IMPORTANCE: Coronaviruses (CoVs) infect several mammals including humans and are associated with respiratory, gastrointestinal and/or neurological diseases. Some evidences suggest that human respiratory CoVs may show neuroinvasive properties. Indeed, the SARS-CoV, causing severe acute respiratory syndrome, and the CoVs OC43 and 229E were found in the brains of SARS and multiple sclerosis patients respectively. These finding suggest that hematogenous spread CoVs may gain access to CNS at the BBB level. Herein we report for the first time that CoVs exhibit ability to cross the BBB according to strain virulence. BBB invasion by CoVs correlates with viral-induced disruption of tight junctions on BMECs, leading to BBB dysfunction and enhanced permeability. We provide evidence that production of IFN-β by BMECs during CoV infection may prevent BBB breakdown and brain viral invasion
ISSN: 0022-538X

hal-01187308
https://hal-univ-rennes1.archives-ouvertes.fr/hal-01187308
DOI : 10.1128/JVI.01501-15
PUBMED : 26202229

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We conducted a laser-equipped analog experiment aimed at quasi-continuously monitoring the growth of a dense population of normal faults in homogeneous conditions. To further understand the way geological faults progressively gain in slip and length as they accumulate more strain, we measured with great precision the incremental slip and length changes that the analog faults sustain as they grow. These measurements show that the analog faults share common features with the natural ones. In particular, during their growth, the faults develop and maintain cumulative slip profiles that are generally triangular and asymmetric. The growth takes place through two distinct phases: an initial, short period of rapid lateral lengthening, followed by a longer phase of slip accumulation with little or no lengthening. The incremental slip is found to be highly variable in both space (along the faults) and time, resulting in variable slip rates. In particular, ‘short- and long-term' slip rates are markedly different. We also find that slip measurements at local points on fault traces do not contain clear information on the slip increment repeat mode. Finally, while the fault growth process is highly heterogeneous when considered at the scale of a few slip events, it appears homogeneous and self-similar at longer time scales which integrate many slip increments. This is likely to be the result of a feedback between stress heterogeneities and slip development. The long-term scale homogeneity also implies that the long-term faulting process is primarily insensitive to the short-term heterogeneities that are rapidly smoothed or redistributed. We propose a new conceptual scenario of fault growth that integrates the above observations and we suggest that faults grow in a bimodal way as a result of a self-driven and self-sustaining process.
ISSN: 0012-821X

Droits : info:eu-repo/semantics/OpenAccess
insu-00351998
https://hal-insu.archives-ouvertes.fr/insu-00351998
https://hal-insu.archives-ouvertes.fr/insu-00351998/document
https://hal-insu.archives-ouvertes.fr/insu-00351998/file/SchlagenhaufEtAl2008_EPSL_author.pdf
DOI : 10.1016/j.epsl.2008.06.042

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
I use GPS interseismic velocities and classic 2D elastic half-space models with a screw dislocation to estimate the long-term fault slip rate, locking depth, and the offset between the surface fault trace and the location of the dislocation below the seismogenic zone for 13 segments along 8 major strike-slip faults. Using deduced strike-slip rates and the position of the dislocation to normalize the interseismic velocities to facilitate comparison of spatial patterns of deformation, I show that no substantial differences can be detected, ruling out a large asymmetry in interseismic velocities across the 8 faults used in this study. Only the Carrizo Plain segment of the San Andreas Fault shows a significant asymmetry that cannot be explained by shifting the position of the dislocation at depth relative to the fault trace. However, the resulting perturbation is less than 10% of total strike-slip rate. Fault traces are usually curved, defining a concave side. When the dislocation at depth is significantly offset from the fault trace, the shift is always toward the block on the concave side of the fault trace. This suggests that the fault zone in the lower crust may develop a simpler geometry more consistent with relative motion across the fault than its upper seismogenic part constrained by the structural complexity of the brittle crust. Since the faults used in this study are at different times in their interseismic period, comparing the interseismic velocity fields across them allows identification of possible variations of the interseismic velocities with time. When normalized by slip rate and dislocation location, all the faults show the same interseismic strain with no significant differences between deduced locking depths. These comparisons suggest that if temporal variations occur as suggested by some dynamic earthquake cycle models, they are small and below the accuracy of the available geodetic measurements.
ISSN: 0040-1951

hal-01171753
https://hal.archives-ouvertes.fr/hal-01171753
DOI : 10.1016/j.tecto.2015.01.013

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The initiation and subsequent evolution of intra-plate orogens, resulting from continental plate interior deformation due to transmission of stresses over large distances from the active plate boundaries, is controlled by lateral and vertical strength contrasts in the lithosphere. We present lithospheric-scale analogue models combining 1) lateral strength variations in the continental lithosphere, and 2) different vertical rheological stratifications. The experimental continental lithosphere has a four-layer brittle–ductile rheological stratification. Lateral heterogeneity is implemented in all models by increased crustal strength in a central narrow block. The main investigated parameters are strain rate and strength of the lithospheric mantle, both playing an important role in crust–mantle coupling. The experiments show that the presence of a strong crustal domain is effective in localizing deformation along its boundaries. After deformation is localized, the evolution of the orogenic system is governed by the mechanical properties of the lithosphere such that the final geometry of the intra-plate mountain depends on the interplay between crust–mantle coupling and folding versus fracturing of the lithospheric mantle. Underthrusting is the main deformation mode in case of high convergence velocity and/or thick brittle mantle with a final asymmetric architecture of the deep lithosphere. In contrast, lithospheric folding is dominant in case of low convergence velocity and low strength brittle mantle, leading to the development of a symmetric lithospheric root. The presented analogue modelling results provide novel insights for 1) strain localization and 2) the development of the asymmetric architecture of the Pyrenees.
ISSN: 0012-821X

hal-01243577
https://hal.archives-ouvertes.fr/hal-01243577
DOI : 10.1016/j.epsl.2015.05.022

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
Continuous Global Positioning System (CGPS) position time series from eastern North America constrain the pattern and magnitude of regional crustal deformation. Initial analysis delineates consistent uplift patterns, as expected from glacial isostatic adjustment (GIA) predictions, but the associated horizontal deformation is not definitive, in part due to the short time periods for a significant number of the available stations. We employ an eigenpattern decomposition in order to define a unique, finite set of deformation patterns for this continuous GPS data. Similar in nature to the empirical orthogonal functions historically employed in the analysis of atmospheric and oceanographic phenomena, the method derives the eigenvalues and eigenstates from the diagonalization of the correlation matrix using a Karhunen-Loeve expansion (KLE). The KLE technique is used to identify the important modes in both time and space for the CGPS data, modes that potentially include signals such as horizontal and vertical GIA, tectonic strain, and seasonal effects. Here we filter both the vertical and horizontal velocity patterns on different spatiotemporal scales in order to study the potential geophysical sources, after the removal of correlated and random noise. The method is successful in disaggregating the linear vertical signal from more variable and less spatially correlated signals. The vertical and horizontal results are compared to the predictions of the ICE-3G GIA loading model with a number of plausible mantle viscosity profiles. The horizontal velocity analysis allows for qualitative differentiation between several potential GIA models and suggests that, with longer time series, this technique can be employed to remove correlated noise and improve estimates of crustal strain patterns and their sources.
ISSN: 0033-4553

hal-00795454
https://hal.archives-ouvertes.fr/hal-00795454
DOI : 10.1007/s00024-011-0420-1

Éditeur(s) : HAL CCSD Elsevier
Résumé : Spinel peridotite xenoliths from Persani Mountains, Southeastern Carpathians, Romania, were submitted to deformation by dislocation creep accompanied by dynamic recrystallization under variable stress and temperature conditions. Predominance of low-angle boundaries parallel to (100) with well-defined [Ovw] rotation axes in olivine indicates that subgrain rotation is the main recrystallization mechanism and that dislocation glide occurs mainly in [100]{0k1} systems. Analysis of olivine crystal preferred orientations highlights that recrystallization results in dispersion of the orientations of recrystallized grains relatively to the parent grains. This dispersion may be quantified by a dimension-less dispersion factor defined as the ratio of the random component of the [100] axis distributions between the recrystallized grains and porphyroclasts. This factor is largely independent from the overall fabric strength, the number of grains analyzed, and the recrystallized grain size. The olivine CPO strength and anisotropy at the rock scale, quantified by J-index, are largely controlled by the volume of recrystallized grains, which depends on finite strain. Comparison of olivine CPO in coarse- and fine-grained porphyroclastic peridotites shows that deviatoric stress and temperature conditions play nevertheless a role on the CPO evolution during recrystallization; selective grain growth, which is favored at high temperature and low stresses, does counteract the dispersion produced by the nucleation processes.
ISSN: 0191-8141

hal-00669963
https://hal.archives-ouvertes.fr/hal-00669963
DOI : 10.1016/j.jsg.2011.09.010

Éditeur(s) : HAL CCSD Wiley-VCH Verlag
Résumé : International audience
Bacterial biofilm development is conditioned by complex processes involving bacterial attachment to surfaces, growth, mobility, and exoproduct production. The marine bacterium Pseudoalteromonas sp. strain D41 is able to attach strongly onto a wide variety of substrates, which promotes subsequent biofilm development. Study of the outer-membrane and total soluble proteomes showed ten spots with significant intensity variations when this bacterium was grown in biofilm compared to planktonic cultures. MS/MS de novo sequencing analysis allowed the identification of four outer-membrane proteins of particular interest since they were strongly induced in biofilms. These proteins are homologous to a TonB-dependent receptor (TBDR), to the OmpW and OmpA porins, and to a type IV pilus biogenesis protein (PilF). Gene expression assays by quantitative RT-PCR showed that the four corresponding genes were upregulated during biofilm development on hydrophobic and hydrophilic surfaces. The Pseudomonas aeruginosa mutants unable to produce any of the OmpW, OmpA, and PilF homologues yielded biofilms with lower biovolumes and altered architectures, confirming the involvement of these proteins in the biofilm formation process. Our results indicate that Pseudoalteromonas sp. D41 shares biofilm formation mechanisms with human pathogenic bacteria, but also relies on TBDR, which might be more specific to the marine environment.
ISSN: 1615-9853

hal-00864093
https://hal.archives-ouvertes.fr/hal-00864093
DOI : 10.1002/pmic.201100644

Éditeur(s) : HAL CCSD North Carolina State University
Résumé : Few studies have been conducted about relation between cellulose parameters and biomechanical properties of wood in tropical angiosperms species. For this purpose, on 13 trees from 3 species of French Guyana tropical rainforest in a clear active process of restoring verticality, i) growth strains were measured in situ in order to determine the occurrence of tension wood within samples and ii) cellulose structural parameters were estimated on all the samples using X-ray diffraction method. Crystallite size was estimated from the full-width at half-maximum of the Miller index (002) arc diffraction and angle T was measured following Cave's method. Relationships between these parameters and growth stresses were good and the variations between normal and tension wood were significant, i.e. a lower angle T and a larger crystallite size in tension wood. In order to have a good estimation of the microfibril angle in the main layer of the secondary wall for each species, an experimental calibration was done between angle T and microfibril angle observed with scanning electron microscopy.
ISSN: 19302126

hal-01031799
https://hal.archives-ouvertes.fr/hal-01031799
https://hal.archives-ouvertes.fr/hal-01031799/document
https://hal.archives-ouvertes.fr/hal-01031799/file/42-575-1-PB.pdf

Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
Based on global earthquake catalogs, the hypocenters, nodal planes, and seismic moments of worldwide subduction plate interface earthquakes were extracted for the period between 1900 and 2007. Assuming that the seismogenic zone coincides with the distribution of 5.5 <= M < 7 earthquakes, the subduction interface seismogenic zones were mapped for 80% of the trench systems and characterized with geometrical and mechanical parameters. Using this database, correlations were isolated between significant parameters to identify cause-effect relationships. Empirical laws obtained in previous studies were revisited in light of this more complete, accurate, and uniform description of the subduction interface seismogenic zone. The seismogenic zone was usually found to end in a fore-arc mantle, rather than at a Moho depth. The subduction velocity was the first-order controlling parameter for variations in the physical characteristics of plate interfaces, determining both the geometry and mechanical behavior. As such, the fast subduction zones and cold slabs were associated with large and steep plate interfaces, which, in turn, had large seismic rates. The subduction velocity could not account for the potential earthquake magnitude diversity that was observed along the trenches. Events with M-w >= 8.5 preferentially occurred in the vicinity of slab edges, where the upper plate was continental and the back-arc strain was neutral. This observation was interpreted in terms of compressive normal stresses along the plate interface. Large lateral ruptures should be promoted in neutral subduction zones due to moderate compressive stresses along the plate interface that allow the rupture to propagate laterally.
ISSN: 1525-2027

hal-00617681
https://hal.archives-ouvertes.fr/hal-00617681
https://hal.archives-ouvertes.fr/hal-00617681/document
https://hal.archives-ouvertes.fr/hal-00617681/file/heuretG32011.pdf
DOI : 10.1029/2010GC003230