Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Holocene Lake Mega-Chad (LMC) was the largest late Quaternary water-body in Africa. The development of this giant paleo-lake is related to a northward shift of the isohyetes interpreted as evidence for an enhanced Monsoon (African Humid Period). Numerous preserved coastal features have been described all around the LMC shore. Such features reveal the main paleo-hydrodynamical tendencies. In the context of a closed water-body like LMC, hydrodynamics are forced mainly by winds. We use a three-dimensional numerical model (SYMPHONIE) to simulate the mean hydrodynamics in LMC under both Harmattan-like (northeasterly trade winds) and Monsoon-like (southwesterly winds) forcings. The northern part of LMC displays coastal features, such as sand spits, that are consistent with the simulations forced by Harmattan-like winds. Geomorphic features related to Monsoon-driven hydrodynamics are not clearly expressed. They could have developed during the early stage of LMC but subsequently reworked. At the time of sand-spit building, Harmattan-like driven hydrodynamics prevailed and related coastal features were preferentially preserved in the sedimentary record.
ISSN: 0033-5894

hal-00475633
https://hal.archives-ouvertes.fr/hal-00475633
DOI : 10.1016/j.yqres.2009.10.010

Éditeur(s) : HAL CCSD
Résumé : International audience
ABSTRACT :A satellite retrieval of surface solar irradiance (SSI) based on GOES satellite data is presented and validated for the French Guiana with three years of in situ measurements from six ground stations. We propose a particle filter approach combining GOES satellite observations and in situ data. We propose an original observation function based on a joint probability distribution and taking advantages of the characteristics of both the involved type of data. The statistical results are compared with those of existing estimation methods and they are found to be in accordance with them. The daily bias ranges from -12 W/m² (-6% of the mean of measurements) to 12 W/m² (6%), depending on the stations. The daily root mean square difference ranges between 23 W/m² (10%) and 27 W/m² (15%). The correlation coefficient is close to 0.92. There is no seasonal climatic effect on the method, the bias and RMSD remain similar for both the rainy and the dry season, but better correlation is observed in the rainy season than in the dry season. Uncertainties are mainly due to the presence of specific tropical atmospheric conditions during the dry season. The method has been tested through various tests: cross-validation scheme has highlighted the potential generalization of the model in a temporal dimension; the ability of the method to effectively duplicate anomalies in surface solar irradiance time series has also been tested. The robustness of the results shows the interest of the method compared to other existing estimation methods. Because of its simplicity of implementation this method opens new prospects in estimating surface solar irradiance. It is concluded that using a particle filter and original observation function method allow a high-quality surface solar irradiance estimation in French Guiana.RESUMEUne méthode d'estimation de l'irradiance solaire de surface (SSI) à partir de données satellites GOES est présentée et validée par comparaison avec trois années de mesures in situ provenant de six stations météorologiques de Guyane Française. Dans cet article, nous proposons une approche par filtre particulaire combinant observations du satellite GOES et données in situ. Nous proposons une fonction d'observation originale basée sur une distribution de probabilité conjointe des deux types de données. Les résultats statistiques sont conformes à ceux des méthodes existantes. Le biais journalier varie de -16 W / m² (-7% de la moyenne des mesures) à 12 W / m² (6%). L'erreur quadratique moyenne (RMSD) est comprise entre 23 W / m² (10%) et 27 W / m² (15%). Le coefficient de corrélation est de 0,92. La méthode est peu sensible aux variations climatiques saisonnières, le biais et RMSD restent similaires en saison des pluies comme en saison sèche, mais une meilleure corrélation est observée pendant la saison des pluies. Les incertitudes sont principalement dues à la présence de conditions atmosphériques tropicales spécifiques en saison sèche. La méthode a été soumise à différents tests : un processus de validation croisée a mis en évidence la possible généralisation du modèle dans une dimension temporelle, la capacité du modèle à reproduire efficacement des anomalies dans les séries temporelles d'irradiance solaire de surface a aussi été testée. La robustesse des résultats obtenus montrent l'intérêt du modèle par rapport aux autres méthodes d'estimation existantes. A cause de sa simplicité de mise en oeuvre cette méthode ouvre de nouvelles perspectives en matière d'estimation de l'irradiance solaire au sol. Nous concluons que l'utilisation d'un filtre particulaire combinée à une fonction d'observation originale permet une estimation de haute qualité de l'irradiance solaire au sol en Guyane Française.
Canadian Journal of Remote Sensing

meteo-01304574
https://hal-meteofrance.archives-ouvertes.fr/meteo-01304574
DOI : 10.1080/07038992.2015.1040150

Éditeur(s) : HAL CCSD American Association of Petroleum Geologists
Résumé : In reservoir engineering, hydrodynamic properties can be estimated from downhole electrical data using heuristic models (e.g., Archie and Kozeny-Carman's equations) relating electrical conductivity to porosity and permeability. Although proven to be predictive for many sandstone reservoirs, the models mostly fail when applied to carbonate reservoirs that generally display extremely complex pore network structures. In this article, we investigate the control of the three-dimensional (3-D) geometry and morphology of the pore network on the electrical and flow properties, comparing core-scale laboratory measurements and 3-D x-ray microtomography image analysis of samples from a Miocene reefal carbonate platform located in Mallorca (Spain). The results show that micrometer- to centimeter-scale heterogeneities strongly influence the measured macroscopic physical parameters that are then used to evaluate the hydrodynamic properties of the rock, and therefore, existing models might not provide accurate descriptions because these heterogeneities occur at scales smaller than those of the integration volume of the borehole geophysical methods. However, associated with specific data processing, 3-D imagery techniques are a useful and probably unique mean to characterize the rock heterogeneity and, thus, the properties variability.
ISSN: 0149-1423

hal-00950066
https://hal.archives-ouvertes.fr/hal-00950066
DOI : 10.1306/05221312134

Éditeur(s) : Université de Bretagne Occidentale
Résumé : Study of mineral suspended particulate matter (SPM) is essential to understand ecosystem dynamics. SPM influences light penetration which is closely related to primary production and carries pollutants and nutrients within the water masses. This work aims to study near-surface mineral SPM dynamics in the English Channel using two complementary methods: remote-sensing by satellites and numerical modelling. Firstly, MODIS and MERIS satellite images processed by the IFREMER semi-analytical algorithm and describing non-algal SPM, are analysed to build three statistical models which are able to estimate near-surface SPM using simple variables, e.g., tidal coefficient, significant wave height and mean chlorophyll-a concentration. Secondly, the three-dimensional hydrosedimentary model ROMS (Regional Ocean Modeling System) is applied in the English Channel. It considers tidal forcing along open boundaries, wind stress at the sea-surface, wave-current interactions in the bottom boundary layer and realistic heterogeneous bottom sediments. Results of the more sophisticated statistical model is also used to impose SPM concentrations at open boundaries. Sensitivity tests on SPM boundary conditions show the importance of prescribing realistic sediment concentrations to improve the model predictions. Biological influences on mineral SPM are also tested using settling velocity and critical shear stress for erosion which vary with seasons. Both statistical and numerical models highlight and locate respective influences of tide, waves and biology on mineral SPM. Numerical predictions indicate that near-surface SPM is mainly composed of silts (>70%). Near-surface suspended silts come largely from seabed resuspension alongshore in the Eastern Channel and from the open boundaries of our limited-area coastal model at the West of Cotentin Peninsula and offshore. Near-surface SPM variations are investigated at semi-diurnal, neap-spring tidal cycle time scales and during a wave event. Finally, dynamics of sediments in the turbidity maximum zone around the Isle of Wight is examined depending on hydrodynamical conditions in order to distinguish the role played by advection and local erosion/settling processes in this area. Keywords: Suspended particulate matter, satellite, remote-sensing, modelling, English Channel, sediments, turbidity, tide, wave
L'étude des matières en suspension (MES) minérales est essentielle pour comprendre le fonctionnement des écosystèmes en Manche : les MES influencent la pénétration de la lumière dans la colonne d'eau, paramètre clé pour la production biologique, et sont susceptibles de transporter des polluants et nutriments. Lors de ce travail, la dynamique des MES minérales de surface en Manche est étudiée à l'aide de deux méthodes complémentaires : l'observation par satellite et la modélisation numérique tridimensionnelle. Dans un premier temps, les images satellite MODIS et MERIS, traitées par l'algorithme semi-analytique développé par l'IFREMER et représentant les MES non-algales de surface, sont analysées afin d'élaborer trois modèles statistiques permettant d'estimer la MES de surface en fonction de variables basiques telles que le coefficient de marée, la hauteur significative des vagues et la concentration moyenne en chlorophylle-a. Dans un deuxième temps, le modèle hydrosédimentaire multiclasse tridimensionnel ROMS (Regional Ocean Modeling System) est implémenté en Manche. Il prend en considération le forçage par la marée aux frontières ouvertes, la contrainte exercée par le vent à la surface de la mer, l'interaction houle-courant en couche limite de fond et l’hétérogénéité spatiale réaliste du lit sédimentaire. Les résultats du modèle statistique le plus sophistiqué sont également utilisés pour forcer la concentration en MES aux frontières ouvertes du domaine de calcul. Des tests de sensibilité sur les conditions limites montrent l'importance de considérer de manière réaliste les sédiments entrant en Manche par les frontières ouvertes lors de la modélisation numérique. L'influence de la biologie sur les MES minérales est testée en utilisant une formulation de la vitesse de chute et de la contrainte critique d'érosion variant saisonnièrement. Grâce à ces deux outils associés, les influences respectives de la marée, de la houle et de la biologie sur les MES minérales sont mises en avant et localisées en Manche. Le modèle numérique prédit que les MES de surface sont composées principalement de silts (>70%). Les silts en suspension en surface proviennent majoritairement du lit sédimentaire près des côtes en Manche orientale et des frontières ouvertes du domaine de calcul à l'ouest de la presqu'île du Cotentin et au large en Manche centrale et orientale. Les variations des MES de surface sont ensuite étudiées aux échelles des cycles de marée semi-diurnes, vive-eau/morte-eau et autour d'un épisode de houles. Enfin, l'évolution de la concentration de sédiments dans la zone de forte turbidité autour de l'île de Wight peut être analysée suivant les conditions hydrodynamiques afin d'évaluer les rôles respectifs des processus locaux d'érosion/dépot et d'advection dans la génération de ces turbidités remarquables. Mots-clés : Matière en suspension, télédétection, satellite, modélisation, Manche, sédiments, turbidité, marée, houle

Droits : 2013 UBO
http://archimer.ifremer.fr/doc/00157/26783/24884.pdf
http://archimer.ifremer.fr/doc/00157/26783/

Éditeur(s) : Elsevier
Résumé : Clinoforms on modern shelves and slopes, as well as in ancient rock records, are widely recognized as a fundamental building element of continental margin growth. Regardless of their dominant lithology, clinoforms are composed of three geometric elements: topset, foreset and bottomset. Traditionally, much emphasis in the study of clinoforms was put on the geometry of the topset, viewed as the most energetic portion of a clinoform and studied to discern if aggradation was active rather than erosional truncation, and on the foreset, the area with the highest sediment accumulation rates. Here we focus on the factors forcing clinoforms to taper out and on the inferred mechanisms for bottomset creation. We base our analysis on muddy shelf clinoforms, a particular class of clinoforms that is typical of low-gradient settings and is characterized by a substantial component of shore-parallel sediment transport. This paper is based on a large dataset of CHIRP-sonar profiles, bathymetric and isopach maps of the Late Holocene clinoform on the Adriatic shelf, where integrated stratigraphic studies from sediment cores allow a very high (in some cases century-scale) chronological resolution. Knowledge on the dominant oceanographic regime affecting sediment dispersal and, ultimately, clinoform development, has been recently refined during the EuroSTRATAFORM collaboration. Muddy clinoforms are markedly three-dimensional features that cannot be entirely understood solely on two-dimensional shore normal sections. We suggest that this class of clinoform is advection dominated and that an increase in the energy regime at the toe of the foreset may prevent sediment from reaching beyond the transition to the bottomset region.
Continental Shelf Research (0278-4343) (Elsevier), 2007-02 , Vol. 27 , N. 3-4 , P. 506-525

Droits : 2006 Elsevier Ltd All rights reserved
http://archimer.ifremer.fr/doc/2007/publication-2409.pdf
DOI:10.1016/j.csr.2006.11.013
http://archimer.ifremer.fr/doc/00000/2409/

Éditeur(s) : HAL CCSD Elsevier
Résumé : Remerciements :- Dr. Jacques Delabie- Andrea Yockey-Dejean- Geoff Brown- Jean-Pierre Andrieu
Background: Most ant venoms consist predominantly of small linear peptides, although some contain disulfide linked peptides as minor components. However, in striking contrast to other ant species, some Anochetus venoms are composed primarily of disulfide-rich peptides. In this study, we investigated the venom of the ant Anochetus emarginatus with the aim of exploring these novel disulfide-rich peptides.Methods: The venom peptidome was initially investigated using a combination of reversed-phase HPLC and mass spectrometry, then the amino acid sequences of the major peptides were determined using a combination of Edman degradation and de novo MS/MS sequencing. We focused on one of these peptides, U-1-PONTX-Ae1a (Ae1a), because of its novel sequence, which we predicted would form a novel 3D fold. Ae1a was chemically synthesized using Fmoc chemistry and its 3D structure was elucidated using NMR spectroscopy. The peptide was then tested for insecticidal activity and its effect on a range of human ion channels.Results: Seven peptides named poneritoxins (PONTXs) were isolated and sequenced. The three-dimensional structure of synthetic Ae1a revealed a novel, compact scaffold in which a C-terminal beta-hairpin is connected to the N-terminal region via two disulfide bonds. Synthetic Ae1a reversibly paralyzed blowflies and inhibited human L-type voltage-gated calcium channels (Ca(v)1).Conclusions: Poneritoxins from Anochetus emarginatus venom are a novel class of toxins that are structurally unique among animal venoms.General significance: This study demonstrates that Anochetus ant venoms are a rich source of novel ion channel modulating peptides, some of which might be useful leads for the development of biopesticides.
ISSN: 0304-4165

hal-01511987
https://hal.archives-ouvertes.fr/hal-01511987
https://hal.archives-ouvertes.fr/hal-01511987/document
https://hal.archives-ouvertes.fr/hal-01511987/file/2016_Touchard_Biochimica_Biophysica_%7B4B3BE6A3-AE83-4C6E-B678-BBFB5CC84AF7%7D.pdf
DOI : 10.1016/j.bbagen.2016.07.027

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The nucleation and growth processes of spherulitic alkali feldspar have been investigated in this study through X-ray microtomography and electron backscatter diffraction (EBSD) data. Here we present the first data on Shape Preferred Orientation (SPO) and Crystal Preferred Orientation (CPO) of alkali feldspar within spherulites. The analysis of synchrotron X-ray microtomography and EBSD datasets allowed us to study the morphometric characteristics of spherulites in trachytic melts in quantitative fashion, highlighting the three-dimensional shape, preferred orientation, branching of lamellae and crystal twinning, providing insights about the nucleation mechanism involved in the crystallization of the spherulites. The nucleation starts with a heterogeneous nucleus (pre-existing crystal or bubble) and subsequently it evolves forming “bow tie” morphologies, reaching radially spherulitic shapes in few hours. Since each lamella within spherulite is also twinned, these synthetic spherulites cannot be considered as single nuclei but crystal aggregates originated by heterogeneous nucleation. A twin boundary may have a lower energy than general crystal–crystal boundaries and many of the twinned grains show evidence of strong local bending which, combined with twin plane, creates local sites for heterogeneous nucleation.This study shows that the growth rates of the lamellae (10− 6–10− 7 cm/s) in spherulites are either similar or slightly higher than that for single crystals by up to one order of magnitude. Furthermore, the highest volumetric growth rates (10− 11–10− 12 cm3/s) show that the alkali feldspar within spherulites can grow fast reaching a volumetric size of ~ 10 μm3 in 1 s.
ISSN: 0024-4937

hal-01172356
https://hal.archives-ouvertes.fr/hal-01172356
DOI : 10.1016/j.lithos.2014.12.003

Éditeur(s) : Université des Antilles Études caribéennes
Résumé : Cet article s’intéresse aux nouveaux usages et usagers du littoral de la Petite Côte sénégalaise. Il vise à mettre en évidence la dynamique territoriale actuelle de la station balnéaire de Saly Portudal et à analyser les mutations socioéconomiques et environnementales qu’elle entraîne. Les limites des politiques actuelles en matière de gestion du littoral imposent des prises de décisions urgentes et plus complexes, sur la base d’un partenariat élargi en vue d’inscrire les effets de ces politiques dans la durée.L’étude s’appuie sur une enquête réalisée au niveau de trois communes littorales, à savoir Saly Portudal, Somone et Nianing. À partir d’une quinzaine d’entretiens semi-directifs réalisés auprès de différents acteurs et usagers de cette portion du littoral, un questionnaire a été construit autour des caractéristiques sociodémographiques de ces derniers, de leurs pratiques et de leurs perceptions des risques côtiers. Il en ressort que les différents usages de l’espace littoral sont liés aux différentes expériences des populations concernées. Dès lors, la question centrale réside dans l’évaluation des conséquences de l’expansion de la station de Saly Portudal au détriment des quartiers traditionnels environnants, et dans la compréhension des multiples dimensions des conflits d’usage qui en découlent.
This article focuses on new uses and users of the coast of Senegal’s Petite Côte. It aims to show the current dynamics of the resort of Saly and analyse the socio-economic changes and environmental all-out occupation of the coastal space guided by new principles of seaside tourism development.The study is based on a survey conducted in three coastal towns like Saly Portudal, Somone and Nianing. From fifteen semi-structured interviews with various stakeholders and users of the coast, a questionnaire was built around the socio-demographic characteristics of users, practices and perceptions of coastal risks. It shows that the different coastal areas of the uses are related to the different experiences of the populations concerned. Therefore, the question arises as to assess the consequences of the expansion of Saly on the surrounding traditional neighbourhoods to understand the multiple dimensions of conflicts of use resulting therefrom in order to resolve them.
Petite-Côte

Droits : info:eu-repo/semantics/openAccess
urn:doi:10.4000/etudescaribeennes.10778
http://journals.openedition.org/etudescaribeennes/10778

Éditeur(s) : HAL CCSD
Résumé : In an earlier paper, we developed an efficient incremental unknowns (IU) preconditioner for solving the two-dimensional (2D) Helmholtz problem in both high and low frequency (wavenumber) regimes. The multilevel preconditioning scheme involves separation of each grid into a coarser grid of the following level and a complementary grid on which the IUs are defined by interpolation. This approach is efficient as long as the mesh size of the coarsest grid is sufficiently small compared to the wavelength. In order to overcome this restriction, the authors introduced recently a modified IU method combining the conventional interpolation with the Helmholtz equation based interpolation (EBI). The EBI coefficients are derived numerically using a sufficiently large set of analytic solutions of the Helmholtz equation on a special hierarchy of stencils. The modified IUs using Helmholtz EBI are shown to provide improved preconditioning on the coarse scales where the conventional interpolation can not be employed. This study deals with the extension of this idea for solving the three-dimensional (3D) Helmholtz equation.
https://hal.univ-antilles.fr/hal-00763930

Droits : info:eu-repo/semantics/OpenAccess
hal-00763930
https://hal.univ-antilles.fr/hal-00763930
https://hal.univ-antilles.fr/hal-00763930/document
https://hal.univ-antilles.fr/hal-00763930/file/eci3D_3d.pdf

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
This article is intended as a preliminary report on the implementation of a finite volume multilevel scheme for the discretization of the incompressible Navier-Stokes equations. As is well known, the use of staggered grids (e.g., MAC grids [M. Perić, R. Kessler and G. Scheuerer, Comput. & Fluids 16 (1988), no. 4, 389-403; Zbl 0672.76018]) is a serious impediment for the implementation of multilevel schemes in the context of finite differences. This difficulty is circumvented here by the use of a colocated finite volume discretization [S. Faure, J Laminie and R. Temam, "Colocated finite volume schemes for fluid flows'', submitted; M. Perić, R. Kessler and G. Scheuerer, op. cit.], for which the algebra of multilevel methods is much simpler than in the context of MAC type finite differences. The general ideas and the numerical simulations are presented in this article in the simplified context of a two-dimensional Burgers equation; the two- and three-dimensional Navier-Stokes equations, which introduce new difficulties related to the incompressibility condition and the time discretization, will be considered elsewhere [see S. Faure, J Laminie and R. Temam, op. cit.; "Finite volume discretization and multilevel methods for the Navier-Stokes equations'', in preparation].
ISSN: 0885-7474

hal-00730193
https://hal.archives-ouvertes.fr/hal-00730193

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Thermal diffusivity of synthetic quartz single-crystals and natural polycrystalline aggregates were measured using a modified Angstrom method at ambient pressure and up to 800 degrees C in order to investigate the effect of crystal preferred orientation on thermal diffusivity of quartz rich rocks. The thermal diffusivity tensor of quartz was determined by measuring the thermal diffusivity of an oriented synthetic quartz single-crystal along the [100] and [001] directions. A naturally deformed, fine-grained quartzite mylonite, was used to compare the single crystal properties with aggregate properties. Using the crystal preferred orientations (CPO) measured by the Electron Back Scattered Diffraction (EBSD) method and the measured thermal diffusivity tensor of quartz, the three-dimensional aggregate thermal diffusivity was modelled using volume averaging models. In order to test the validity of these models that are only based on the properties of the constituent minerals, the thermal diffusivity was then measured on oriented cores as a function of temperature, along three orthogonal directions, parallel to the (X-lineation, Y, Z-pole to foliation) structural frame. Both modelled and direct measurement of thermal diffusivity show an anisotropy of thermal diffusivity, heat transport being more effective parallel to Y-direction and less effective parallel to the lineation X-direction. Thermal diffusivities measured in a given direction on the natural rock are lower by less than 10% than the modelled thermal diffusivity in the same direction, showing that rock imperfections have a weak effect on heat transport. In addition, the modelled thermal diffusivity anisotropy based on the characterization of crystal orientations and thermal diffusivity tensor shows a good agreement with measurements in both alpha and beta stability field. This validation of the petrophysical simulation allows for evaluating the 3D thermal diffusivity of quartz rich rocks in different crustal conditions. The 3D thermal diffusivity of five naturally deformed quartzites displaying quartz fabrics expected in different crustal pressure and temperature ranges were simulated. The resulting thermal diffusivity anisotropies of quartzites range between 40% and 10%, depending on temperature, crystallographic fabric patterns and fabric strength. Under crustal conditions, quartzites deformed in the granulite facies display a high thermal diffusivity in the (XZ) foliation plane, whereas quartzites deformed in greenschist facies have highest thermal diffusivity in the (Z) direction normal to the foliation plane.
ISSN: 0040-1951

hal-00413568
https://hal.archives-ouvertes.fr/hal-00413568
DOI : 10.1016/j.tecto.2008.11.006

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
Sandbox experiments, using a two-dimensional and a three-dimensional approach, are used to study the deformation of margins in response to seamount subduction. Successive mechanisms of deformation are activated during the subduction of conical seamounts. First, reactivation of the frontal thrusts and compaction of the accretionary wedge is observed. Then, back thrusting and, conjugate strike-slip faulting develops above the leading slope of the subducted seamount. The basal d6collement is deflected upward in the wake of the subducting high, and a large shadow zone develops behind the seamount trailing slope. Consequently, frontal accretion is inhibited and part of the frontal margin is dragged into the subduction zone. When the main d6collement returns to its basal level in the wake of the seamount, the margin records a rapid subsidence and a new accretionary wedge develops, closing the margin reentrant. The sediments underthrusted in the wake of the seamount into the shadow zone, are underplated beneath the rear part of the accretionary wedge. Substantial shortening and thickening of the deformable seaward termination of the upper plate basement, associated with basal erosion is observed. Seamount subduction induces significant material transfer within the accretionary wedge, favors large tectonic erosion of the frontal margin and thickening of the rear part of the margin. The subduction and underplating of relatively undeformed, water-ladden sediments, associated with fluid expulsion along the fractures affecting the margin could modify the fluid pressure along the basal ddcollement. Consequently, significant variations of the effective basal friction and local mechanical coupling between the two plates could be expected around the subducting seamount.
ISSN: 0278-7407

hal-01261523
https://hal.archives-ouvertes.fr/hal-01261523
https://hal.archives-ouvertes.fr/hal-01261523/document
https://hal.archives-ouvertes.fr/hal-01261523/file/Dominguez2000-Tectonics.pdf
DOI : 10.1029/1999TC900055

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : Results are reported for an acidic water flow-through experiment conducted in a fractured argillaceous limestone sample (73% carbonates). The change in fracture geometry and related parameters is reported for six data sets obtained from synchrotron X-ray microtomography experiments. High-resolution three-dimensional images of the sample allowed quantification of the changes in fracture morphology at a spatial resolution of 6 ;μm. Mineral mass loss and permeability changes in the sample were also determined. Several physico-chemical phenomena were identified during the experiment. Initial smooth fracture surfaces evolved rapidly toward rough surfaces with uneven clay coverage due to the preferential dissolution of carbonate minerals compared to clay minerals whose dissolution rate is about 106 slower. A microporous clay coating progressively developed at the fluid-rock interface during heterogeneous dissolution of the fracture, while the global dissolution rate of the fracture walls exponentially decreased. The increase in surface roughness and the presumed reorganization of clays caused a progressive reduction in permeability. During the last flow-through stage, a large decrease in sample permeability was attributed to the large removal of clay particles; this process was responsible for a dramatic collapse of the fracture walls near the sample inlet and led to the development of preferential flow pathways. The development of the clay coating also acted as a barrier to flow and mass transfer between calcite grains and bulk solution and affected transport processes within the fracture
ISSN: 0043-1397

hal-00405333
https://hal.archives-ouvertes.fr/hal-00405333
DOI : 10.1029/2006WR005379

Éditeur(s) : HAL CCSD Geological Society of America
Résumé : International audience
On the New Jersey shelf (offshore North America), the presence of pore water fresher than seawater is known from a series of boreholes completed during the 1970s and 1980s. To account for this fresh water, a fi rst hypothesis involves possible present-day active dynamic connections with onshore aquifers, while a second involves meteoritic and/or sub- ice-sheet waters during periods of lowered sea level. Expedition 313 drilled three boreholes on the middle shelf, offering a unique opportunity for the internal structure of the siliciclastic system to be accessed, at scales ranging from the depositional matrix to the continental margin. This enables the stratigraphic architecture to be correlated with the spatial distribution and salinity of saturating fl uids. Expedition 313 revealed both very low salinities (<3 g/L) at depths exceeding 400 m below the seafl oor and evidence for a multilayered reservoir organization, with freshand/ or brackish-water intervals alternating vertically with salty intervals. In this study we present a revised distribution of the salinity beneath the middle shelf. Our observations suggest that the processes controlling salinity are strongly infl uenced by lithology, porosity, and permeability. Saltier pore waters generally occur in coarse-grained intervals and fresher pore waters occur in fi ne-grained intervals. The transition from fresher to saltier intervals is often marked by cemented horizons that probably act as permeability barriers. In the lowermost parts of two holes, the salinity varies independently of lithology, suggesting different mechanisms and/or sources of salinity. We present an interpretation of the sedimentary facies distribution, derived from core, logs, and seismic profi le analyses, that is used to discuss the marginscale two-dimensional reservoir geometry and permeability distribution. These proposed geometries are of primary importance when considering the possible pathways and emplacement mechanisms for the fresh and salty water below the New Jersey shelf.
EISSN: 1553-040X

insu-00858241
https://hal-insu.archives-ouvertes.fr/insu-00858241
DOI : 10.1130/GES00855.1

Éditeur(s) : Université des Antilles Études caribéennes
Résumé : The current consensus on Sustainable Tourism Development emphasizes the necessity for all tourist planning and policy making decisions to consider the impacts of tourism activity on all three dimensions of sustainability: economic efficiency referring to the capacity of an economy to be competitive, social justice aiming at the better distribution of produced welfare in the society and environmental preservation as the conservation of ecosystem’s capacity to provide humans with goods and services essential for their survival.A successful evaluation of the tourism activity presupposes the extensive examination of certain elements of the tourism product itself (expressed as characteristics of supply, demand and the organization of the tourist market), along a series of parameters related directly to the tourism products (effects), and indirectly to its implications for the destination (impacts). This paper presents a methodological framework for an integrated evaluation and monitoring of the tourism activity, in support of planners and policy makers towards both tourism and regional policy.A case study on the island of Samos in Greece is employed to demonstrate the scope of the methodology based on real data, its potential value but also its limits. The results of the study indicate that tourism remains the main developmental force in the island for over two decades without unfortunately, succeeding to deviate from the rule of decreasing tendencies, of similar mass tourism destination.
Le consensus actuel sur le développement du tourisme durable met l’emphase sur la nécessité pour tous les porteurs de projets et décideurs de prendre en compte les impacts de l’activité touristique sur les trois dimensions de la durabilité : l’efficience économique se réfère à la capacité d’une économie à être compétitive, la justice sociale aspire à une meilleure redistribution des richesses au sein de la société et la préservation de l’environnement concerne la préservation de la capacité des écosystèmes à fournir aux humains les biens et services essentiels à leur survie.Une évaluation réussie de l’activité touristique présuppose un examen exhaustif de certains éléments du produit touristique en lui-même (caractéristiques de l’offre, de la demande et de l’organisation du marché touristique), ainsi qu’une série de paramètres liée directement au produit touristique (effet). Il faut également prendre en compte les implications directes et indirectes du développement touristique de la destination (impacts). Cette recherche présentera un cadre méthodologique pour l’évaluation et la gestion intégrée de l’activité touristique, pour accompagner l’élaboration de politiques publiques et ce tant au niveau du tourisme que des politiques régionales.Une étude de cas réalisée sur l’île de Samos en Grèce sera utilisée pour démontrer la portée de la méthodologie utilisée (basée sur des résultats réels), sa valeur potentielle, ainsi que ses limites. Les résultats de l’étude indiquent que, depuis deux décennies, le tourisme est la principale force de développement de l’île sans, malheureusement, déroger à la règle des tendances à la baisse qui affecte également d’autres destinations touristiques similaires.
Grèce
Samos

Droits : info:eu-repo/semantics/openAccess
urn:doi:10.4000/etudescaribeennes.6257
http://journals.openedition.org/etudescaribeennes/6257

Éditeur(s) : HAL CCSD CNRS éditions
Résumé : International audience
Die antike Siedlung von Mandeure und Mathay (Epomanduodurum), welche durch ihre Größe und ihre monumentale Ausstattung als die zweitwichtigste Stadt der Sequaner hinter der Civitashauptstadt Besançon betrachtet wird, ist Gegenstand eines interdisziplinarischen Forschungsprogramms. Dieser Artikel stellt eine Bilanz der Ergebnisse der zwischen 2001 und 2004 durchgeführten Forschungen dar. Im Mittelpunkt der Forschungen der ersten Phase stand der zentralen Teil der Siedlung mit dem Bereich Heiligtum-Theater-spätrömische Befestigung, der für die Problematik der Entstehung, der Entwicklung und dem Ende der römischen Besiedlung besonders interessant ist. Verschiedene, sich ergänzende Projekte wurden eingeleitet: Erforschung des alten Dokumentarbestandes, geophysikalische Prospektionen, geoarchäologische Sondierungen, Plangrabungen, architektonische Untersuchunge. Durch diese Projekte war es möglich, die Kenntnisse über die drei wichtigen Großbauten (Heiligtum-Theater-spätrömische Befestigung) grundsätzlich zu vertiefen und insbesondere die geophysikalischen Prospektionsergebnisse lassen in bemerkenswerter Weise einen dichten Baubestand dieses Stadtteils erkennen. Schließlich konnte die Funktion und die Entwicklung der Flußebene des Doubs in diesem Bereich besser verstanden werden als auch die Art und Weise in welcher die antike Monumentalanlage in diesen einzigartigen natürlichen Rahmen einbezogen wurde.
Since 2001, a collective pluridisciplinary research programme is being undertaken on the antique town of Epomanduodurum in the communes of Mandeure and Mathay. This site is considered like the second one of the Sequani, for its dimensions and the monuments, after the civitas capital, Besançon. This article is an assessment of the investigations conducted between 2001 and 2004. During this period, the central part of the site was studied (sanctuary, theatre, Late fortification area), considered as the most significant for the question of the birth, development and decline of the town. Various complementary approaches have been carried out: study of archives, geophysical and geoarchaeological survey, extent excavations, architectural analyses. They lead to a better understanding of the three main buildings (the Celtic and Gallo-Roman sanctuary, the theatre of the Principate, the Late Antique fortification) and they add considerable informations about the pattern of settlement of this area; so it is possible to detect more precisely the spatial organization and finally to understand how the alluvial plain of the Doubs river was functioning and how the monumental complex has been integrated in such a peculiar landscape.
L'agglomération antique d'Epomanduodurum, située sur les communes de Mandeure et Mathay, et considérée comme la seconde du pays séquane par la taille et la parure monumentale, derrière la capitale de cité, Besançon, fait l'objet d'un programme collectif de recherche, pluridisciplinaire, depuis 2001. Cet article dresse un bilan des résultats des fouilles réalisées entre 2001 et 2004. Dans cette première phase, les investigations ont porté principalement sur la partie centrale du site (secteur sanctuaire-théâtrefortification tardive), perçue comme particulièrement intéressante pour la problématique de la naissance, du développement et du déclin de l'agglomération. Différentes approches complémentaires ont été lancées : étude du fond documentaire ancien, prospections géophysiques, sondages géoarchéologiques, fouilles extensives, études architecturales. Elles ont permis d'approfondir la connaissance des trois principaux édifices (sanctuaire laténien et gallo-romain, théâtre du Haut-Empire, fortification du Bas-Empire), de compléter de façon très notable la trame de l'occupation de ce secteur, et donc d'en mieux percevoir l'organisation spatiale, enfin de mieux comprendre le fonctionnement de la plaine alluviale du Doubs et l'insertion dans ce contexte naturel particulier d'un complexe monumental antique.
ISSN: 0016-4119

halshs-00718356
https://halshs.archives-ouvertes.fr/halshs-00718356

Éditeur(s) : HAL CCSD
Résumé : At present, the forecasting of littoral evolution presents a considerable social stake. Many studies have been achieved to better understand coastal dynamics. Such dynamics are controlled by morphology, sediment supply, hydrodynamics, eustacy... at different time scales. At geological time scale, deposits geometry, controlled by eustacy and subsidence, is succesfully analysed where sediment supply is high. But the littoral zones present important sediment supply variability. In low sediment supply areas, the record of coastal tracts is smaller and harder to interprete. Analyses of about 250 kilometres of new VHR seismic profiles acquired along the languedocian coast (Northern Gulf of Lion, France), tens of short cores and outcrops data allowed us to determine the three-dimensional high-resolution geometry of the coastal tracts from Quaternary to present-day. This highlighted the role of alongshore dynamics in coast where direct sediment supply is low. The concepts of protected lagoon and isolated lagoon were broughted to the fore and the effect of inherited incised valley morphology was discussed. Last, a complementary study by analogue modeling of the channel incision processes controled by eustatic and climatic changes allowed to discuss the role of incised valleys in coastal areas.
Actuellement, la prévision de l'évolution d'un système littoral représente un enjeu social important. De nombreuses études sont réalisées afin de mieux connaitre la dynamique côtière et donc de comprendre les facteurs qui influencent son évolution. Cette dynamique est contrôlée par la morphologie, les apports sédimentaires, l'hydrodynamique, l'eustatisme... qui agissent à des échelles de temps différentes et avec de fortes interactions. A l'échelle géologique, l'architecture des dépôts, contrôlée par l'eustatisme et la subsidence, est parfaitement décrite dans les zones à forts apports sédimentaires. Par contre, dans les zones à faibles apports sédimentaires, l'enregistrement des cortèges côtiers est réduit et est difficile à interpréter. L'analyse de 250 kilomètres de profils sismiques THR sur le littoral languedocien (Nord du Golfe du Lion, France), de carottages et de données de terrain a permis de déterminer la géométrie en trois dimensions des cortèges sédimentaires côtiers depuis le Quaternaire jusqu'à l'actuel. Ces observations montrent l'importance de la dynamique longshore sur les littoraux pauvres en apports sédimentaires directs. De plus, l'étude d'un système lagunaire sur ce littoral met en évidence les concepts de lagunes protégées et lagunes isolées ainsi que l'importance des vallées incisées dans la génèse de ces environnements. Enfin, la modélisation en laboratoire des processus d'incision de chenaux sous contrôle eustatique et climatique permet de discuter le rôle des vallées incisées en milieu côtier.
https://tel.archives-ouvertes.fr/tel-00542897

tel-00542897
https://tel.archives-ouvertes.fr/tel-00542897
https://tel.archives-ouvertes.fr/tel-00542897/document
https://tel.archives-ouvertes.fr/tel-00542897/file/theseraynaldef.pdf

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Orogenic lherzolites exhibit a specific (although reproducible) platinum-group element signature characterized by slight positive deviations of Pd/Ir, Rh/Ir and Ru/Ir ratios from the canonical chondritic model. Such a signature was alternatively considered to be a compositional feature of the primitive upper mantle or resulting from sulfide melt addition by refertilisation reactions in the continental lithosphere. To shed additional light on this conundrum, the distribution of PGE in FON B 93, an unserpentinized, fertile (3.24% Al2O3) orogenic lherzolite (French Pyrenees) used as in-house standard by our group, has been studied to different scales, from the bulk rock to trace minerals. In addition to new ICPMS analyses after separation into Nis and Te coprecipitation, its whole-rock PGE concentrations were redetermined by three different laboratories using very precise ID-ICP-MS methods after digestion of the sample in Carius tube at T=250 degrees C and 320 degrees C or in high-pressure asher (HPA-S). The four methods produce reproducible Ru, Rh and Pd contents (7.1 +/- 0.18 ppb; 1.43 +/- 0.05 ppb; 7.1 +/- 0.30 ppb) whereas the non-ID NiS-fire assay method underestimates the Os and Ir concentrations by c.a. 10 and 15% compared to ID-ICP-MS analyses (4.40 +/- 0.07 and 4.00 +/- 0.17 ppb, respectively). Platinum was the most difficult to analyse. If performed on powder aliquots smaller than 3 g, the ID-ICP-MS analyses generate strong nugget effects while the non-ID NiS-fire assay method yields statistically lower (but highly reproducible) Pt concentrations (6.92 +/- 0.26 ppb). These features reflect the strong partitioning of Pt into trace phases that SEM and laser ablation-ICP-MS analyses on thin sections identify as both high-temperature Pt-Ir-Os alloys and Pt-(Pd) tellurides of likely subsolidus origin; ten to fifteen grains ranging in maximum dimension from a few micrometres to a few hundreds of nanometers, were identified by standard polished thin section. LA-ICP-MS data on base metal sulfides (25 grains analysed), coupled with the whole-rock S concentration (277 +/- 10 ppm) and modal composition of the BMS (90% pentlandite+accessory pyrite and secondary pyrrhotite + 10% chalcopyrite) allowed the contribution of the BMS phase to the PGE budget of FON B 93 to be estimated. Except Pt that exhibits a 95% deficit in the BMS phase, the PGE concentrations measured by ID-ICP-MS can be balanced by BMS while Al-spinel is a negligible contributor, accounting for less than 0.5% of the Ru budget. The occurrence of Pt in trace phases may bias the whole-rock Pt concentrations because 1) mechanical collection of Pt-rich trace phases remains problematic with the Nis button, and 2) Pt-Ir-Os alloys may be prone to digestion problems in conventional Carius tube procedures. Since they could be stable at mantle depth, such refractory alloys that contain Os and Ir may also have enhanced the heavy PGEs/light PGEs fractionation. Our observations likely pertain to orogenic lherzolites as a whole because BMS assemblages in these mantle rocks record evolution at low sulfur fugacity, which prevents Pt-Ir-Os alloy from entering the Mss in the mantle; moreover, at subsolidus temperature, pentlandite, the major BMS, cannot accommodate 0 valence state Pt.
ISSN: 0009-2541

hal-00411486
https://hal.archives-ouvertes.fr/hal-00411486
DOI : 10.1016/j.chemgeo.2007.06.030

Éditeur(s) : HAL CCSD Wiley
Résumé : International audience
A relevant and accurate description of three-dimensional (3D) protein structures can be achieved by characterizing recurrent local structures. In a previous study, we developed a library of 120 3D structural prototypes encompassing all known 11-residues long local protein structures and ensuring a good quality of structural approximation. A local structure prediction method was also proposed. Here, overlapping properties of local protein structures in global ones are taken into account to characterize frequent local networks. At the same time, we propose a new long local structure prediction strategy which involves the use of evolutionary information coupled with Support Vector Machines (SVMs). Our prediction is evaluated by a stringent geometrical assessment. Every local structure prediction with a Calpha RMSD less than 2.5 A from the true local structure is considered as correct. A global prediction rate of 63.1% is then reached, corresponding to an improvement of 7.7 points compared with the previous strategy. In the same way, the prediction of 88.33% of the 120 structural classes is improved with 8.65% mean gain. 85.33% of proteins have better prediction results with a 9.43% average gain. An analysis of prediction rate per local network also supports the global improvement and gives insights into the potential of our method for predicting super local structures. Moreover, a confidence index for the direct estimation of prediction quality is proposed. Finally, our method is proved to be very competitive with cutting-edge strategies encompassing three categories of local structure predictions. Proteins 2009. (c) 2009 Wiley-Liss, Inc.
ISSN: 0887-3585

inserm-00348740
http://www.hal.inserm.fr/inserm-00348740
http://www.hal.inserm.fr/inserm-00348740/document
http://www.hal.inserm.fr/inserm-00348740/file/Bornot_Proteins_2009_preprint_version.pdf
http://www.hal.inserm.fr/inserm-00348740/file/inserm-00348740_edited.pdf

Éditeur(s) : Elsevier Science Bv
Résumé : The modern Rhone delta in the Gulf of Lions (NW Mediterranean) is a typical wave-dominated delta that developed after the stabilization of relative sea level following the last deglacial sea-level rise. Similar to most other deltas worldwide, it displays several stacked parasequences and lobes that reflect the complex interaction between accommodation, sediment supply and autogenic processes on the architecture of a wave-dominated delta. The interpretation of a large set of newly acquired very high-resolution seismic and sedimentological data, well constrained by 14C dates, provides a refined three-dimensional image of the detailed architecture (seismic bounding surfaces, sedimentary facies) of the Rhone subaqueous delta, and allows us to propose a scenario for delta evolution during the last deglaciation and Holocene. The subaqueous delta consists of “parasequence-like” depositional wedges, a few meters to 20–30 m in thickness. These wedges first back-stepped inland toward the NW in response to combined global sea-level rise and overall westward oceanic circulation, at a time when sediment supply could not keep pace with rapid absolute (eustatic) sea-level rise. At the the Younger Dryas-Preboreal transition, more rapid sea-level rise led to the formation of a major flooding surface (equivalent to a wave ravinement surface). After stabilization of global sea level in the mid-Holocene, accommodation became the leading factor controlling delta architecture. An eastward shift of depocenters occurred, probably favoured by higher subsidence rate within the thick Messinian Rhone valley fill. The transition between transgressive (backstepping geometry) and regressive (prograding geometry) (para)sequences resulted in creation of a Maximum Flooding Surface (MFS) that differs from a “classical” MFS described in the literature. It consists of a coarse-grained interval incorporating reworked shoreface material within a silty clay matrix. This distinct lithofacies results from condensation/erosion, which appears as an important process even within supply-dominated deltaic systems, due to avulsion of distributaries. The age of the MFS varies along-strike between ca. 7.8-5.6 kyr cal. BP in relation to the position of depocenters and climatically-controlled sediment supply. The last rapid climate change of the Holocene, the Little Ice Age (1250–1850 AD), had a distinct stratigraphic influence on the architecture and lithofacies of the Rhone subaqueous delta through the progradation of two deltaic lobes. In response to changes in sediment supply linked to rapid climate changes (and to anthropic factors), the Rhone delta evolved from wave-dominated to fluvial dominated, and then wave dominated again.
Sedimentary Geology (0037-0738) (Elsevier Science Bv), 2014-05 , Vol. 305 , P. 35-53

Droits : 2014 Elsevier B.V. All rights reserved.
http://archimer.ifremer.fr/doc/00179/29017/27445.pdf
DOI:10.1016/j.sedgeo.2014.02.004
http://archimer.ifremer.fr/doc/00179/29017/