Éditeur(s) : HAL CCSD
Résumé : International audience
Metamorphic soles correspond to m to 500m thick tectonic slices welded beneath most of the large-scale ophiolites.They typically show a steep inverted metamorphic structure where the pressure and temperature conditions ofcrystallization increase upward (from 500100ºC at 0.50.2 GPa to 800100ºC at 1.00.2 GPa), with isogradssubparallel to the contact with the overlying ophiolitic peridotite. The proportion of mafic rocks in metamorphicsoles also increases from the bottom (meta-sediments rich) to the top (approaching the ophiolite peridotites). Thesesoles are interpreted as the result of heat transfer from the incipient mantle wedge toward the nascent slab (associatedwith large-scale fluid transfer and possible shear heating) during the first My of intra-oceanic subduction(as indicated by radiometric ages). Metamorphic soles provide therefore major constraints on early subductiondynamics (i.e. thermal structure, fluid migration and rheology along the nascent slab interface).We present a detailed structural and petrological study of the metamorphic sole from 4 major cross-sections alongthe Oman ophiolite. We show precise pressure–temperature estimates obtained by pseudosection modelling andEBSD measurements performed on both the garnet-bearing and garnet-free high-grade sole. Results allow quantificationof the micro-scale deformation and highlight differences in pressure–temperature–deformation conditionsbetween the 4 different locations, showing that the inverted metamorphic gradient through the sole is not continuousin all locations.Based on these new constraints, we suggest a new tectonic–petrological model for the formation of metamorphicsoles below ophiolites. This model involves the stacking of several homogeneous slivers of oceanic crust leadingto the present-day structure of the sole. In this view, these thrusts are the result of rheological contrasts between thesole and the peridotite as the plate interface progressively cools down. These slivers later underwent several stagesof retrogression (partly mediated by ascending fluids from the slab) from amphibolite- to prehnite/pumpellite-faciesconditions.
Geophysical Research Abstracts
Vienne, Austria

insu-01309369
https://hal-insu.archives-ouvertes.fr/insu-01309369

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
After the January 12, 2010, Haiti earthquake, we deployed a mainly offshore temporary network of seismologic stations around the damaged area. The distribution of the recorded aftershocks, together with morphotectonic observations and mainshock analysis, allow us to constrain a complex fault pattern in the area. Almost all of the aftershocks have a N‐S compressive mechanism, and not the expected left‐lateral strike‐slip mechanism. A first‐order slip model of the mainshock shows a N264°E north‐dipping plane, with a major left‐lateral component and a strong reverse component. As the aftershock distribution is sub‐parallel and close to the Enriquillo fault, we assume that although the cause of the catastrophe was not a rupture along the Enriquillo fault, this fault had an important role as a mechanical boundary. The azimuth of the focal planes of the aftershocks are parallel to the north‐dipping faults of the Transhaitian Belt, which suggests a triggering of failure on these discontinuities. In the western part, the aftershock distribution reflects the triggering of slip on similar faults, and/or, alternatively, of the south‐dipping faults, such the Trois‐Baies submarine fault. These observations are in agreement with a model of an oblique collision of an indenter of the oceanic crust of the Southern Peninsula and the sedimentary wedge of the Transhaitian Belt: the rupture occurred on a wrench fault at the rheologic boundary on top of the under‐thrusting rigid oceanic block, whereas the aftershocks were the result of the relaxation on the hanging wall along pre‐existing discontinuities in the frontal part of the Transhaitian Belt.
ISSN: 0094-8276

insu-00643489
https://hal-insu.archives-ouvertes.fr/insu-00643489
https://hal-insu.archives-ouvertes.fr/insu-00643489/document
https://hal-insu.archives-ouvertes.fr/insu-00643489/file/GRL-haiti.2011.pdf
DOI : 10.1029/2011GL049799

Éditeur(s) : HAL CCSD Société géologique de France
Résumé : International audience
– The 300 km long allochthonous sheet of oceanic mantle forming the New Caledonia ophiolite displays three specific characters: 1) the ophiolite pile lacks concordant sheeted dykes and pillow basalt layers; 2) the ophiolite, refered to as the Peridotite nappe, is thrusted over the basaltic formations of the Poya terrane which are classicaly thought to originate from a different oceanic environment; 3) The basal contact of the ultramafic sheet is remarkably flat all along New-Caledonia and the Peridotite nappe has not been thickened during obduction, rather it experienced significant extension. This suggests that the peridotites have not been emplaced by a tectonic force applied to the rear. New petrological and geochemical results obtained from mantle rocks finally show that the Poya terrane may originate from the same oceanic basin as the peridotites. In this article, we consider such possible cogenetic links and we propose a simple model for the obduction of the New Caledonia ophiolite in which the Poya basalts represent the original cover of the Peridotite nappe. We infer that continuous uplift of the subducted units buried beneath the oceanic lithosphere in the northern part of New Caledonia drove passive uplift of the ophiolite and led to erosion and to initiation of sliding of the basaltic layer. During the Priabonian (latest Eocene), products of the erosion of the basaltic layer were deposited together with sediments derived from the Norfolk passive oceanic margin. These sediments are involved as tectonic slices into an accretionary wedge formed in response to plate convergence. The volcaniclastic sedimentation ends up with the emplacement of large slided blocks of basalts and rafted mafic units that progressively filled up the basin. Obduction process ended with the gravity sliding of the oceanic mantle sheet, previously scalped from its mafic cover. This process is contemporaneous with the exhumation of the HP-LT units of Pouebo and Diahot. Gravity sliding was facilitated by the occurrence of a continuous serpentine sole resulting from metasomatic hydratation of mantle rocks, which developed during the uplift of the Norfolk basement and overlying Diahot and Pouébo units. Progressive emersion of the obducted lithosphere allowed subsequent weathering under subaerial, tropical conditions. Obduction passive et mise en place gravitaire des grandes nappes ophiolitiques : les ophiolites de Nouvelle-Calédonie (SW Pacifique) sont-elles un cas d'école ? Résumé. – La nappe de manteau de Nouvelle-Calédonie, s'étendant sur 300 km de long montre trois caractéristiques im-portantes: 1) La succession ophiolitique ne contient ni dykes, ni basaltes en coussin, 2) l'ophiolite est charriée sur des formations basaltiques (nappe de Poya) que l'on considère classiquement comme originaires d'un bassin océanique dif-férent de celui d'où est issu le manteau, et 3) le contact basal de la nappe ultrabasique est remarquablement plat tout le long de l'île et celle-ci n'a pas été épaissie durant l'obduction. Cela suggère que les péridotites n'ont pas été mises en place en réponse à une poussée tectonique arrière. De nouveaux résultats pétrologiques et géochimiques obtenus sur l'ophiolite montrent en réalité que les basaltes de Poya peuvent être extraits de la fusion du manteau de l'ophiolite. Nous proposons donc un nouveau modèle pour l'obduction, dans lequel les basaltes de Poya forment la couver-ture initiale primitive du manteau de la nappe des péridotites. La surrection progressive des unités profondes enfouies lors de la subduction de la lithosphère du bassin sud-Loyauté à l'Eocène, a permis le soulèvement passif de l'ophiolite et l'érosion puis le glissement des unités basaltiques. Durant le Priabonien, l'accumulation des produits de l'érosion de la couche des basaltes et de la marge passive de Norfolk ont formé les séquences de flysch comprenant localement des débris basaltiques grossiers. Ces sédiments font partie d'un prisme d'accrétion tectonique construit en réponse à la convergence au front de la subduction. La sédimentation détritique se termine par la mise en place de grandes unités ba-saltiques glissées qui comblent le bassin. Le processus de l'obduction se termine par le glissement gravitaire de l'écaille de manteau océanique sur les basaltes. Cet événement est contemporain de l'exhumation des unités HP-BT de Pouébo et du Diahot. Le glissement gravitaire a été facilité par la présence sous l'ophiolite, d'une semelle continue de serpentines résultant de l'interaction du manteau avec des fluides métasomatiques remontant durant l'exhumation des unités en-fouies pendant la subduction continentale. L'émersion progressive de la lithosphère obduite a placé le manteau dans des conditions d'altération supergène tropicale.
EISSN: 1777-5817

hal-01257702
https://hal.archives-ouvertes.fr/hal-01257702
https://hal.archives-ouvertes.fr/hal-01257702/document
https://hal.archives-ouvertes.fr/hal-01257702/file/Lagabrielleetal-BSGF-2012-revised-light.pdf
DOI : 10.2113/gssgfbull.184.6.545

Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
A NE-SW magnetotelluric 110 km-long profile including 18 sites was acquired across the western Rif Cordillera along the Eurasian-African plate boundary, allowing to constrain its poorly known deep structure. It extends from the Internal Zones, close to the Alboran coast, crossing the External Zones and up to the Gharb foreland basin. The periods recorded range from 0.001 s to 1000 s. The combination of magnetotelluric data with available geological data provides new insight regarding the relationship between deep and shallow crustal structures of the Rif Cordillera. Analyses of structural dimensionality suggest a preferential NW-SE direction, and a 2D joint inversion was performed. A 3D inversion extending the 2D model along the strike confirmed the reliability of this approach. The magnetotelluric model shows a heterogeneous upper crust in agreement with the geological structures observed at surface. The Internal Zones correspond to resistive (metamorphic rocks) and conductive (peridotites) bodies, while the External Zones and the foreland basin are characterized by large conductive bodies of variable thickness. A crustal detachment level separating shallow geological units from a probable variscan basement was inferred. At depth, the most relevant feature consists of large resistive bodies with a shallow irregular top, located below the frontal part of the Rif. The outcrops of exotic metapelitic, granitic and gneissic blocks in the frontal part of the Cordillera suggest that these large resistive bodies may correspond to a gneissic or granitic basement surrounded by metapelitic rocks. Late contractive thrust and diapiric processes were responsible for their uplift and shallow emplacement. The Rif constitutes an active southwestward vergent orogenic wedge, oblique to the present-day NW-SE convergent Eurasian-African plate boundary.
ISSN: 1525-2027

hal-00670999
https://hal.archives-ouvertes.fr/hal-00670999
DOI : 10.1029/2011GC003783

Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
The transition zone at the downdip end of seismic coupling along subduction interfaces is often the site of megathrust earthquake nucleation and concentrated postseismic afterslip, as well as the focus site of episodic tremor and slip features. Exhumed remnants of the former Alpine subduction zone found in the Swiss Alps allow analyzing fluid and deformation processes near the transition zone region (30–40 km paleodepth). The Dent Blanche Thrust (DBT) is a lower blueschist-facies shear zone interpreted as a fossilized subduction interface where granitic mylonites overlie a metamorphosed accretionary wedge. We report field observations from the DBT region where multiple, several tens of meters thick foliated cataclastic networks are interlayered within the basal DBT mylonites. Petrological results and microstructural observations indicate that the various cataclasis events took place at near-peak metamorphic conditions (400–500°C, 1.1–1.3 GPa) during subduction of the Tethyan seafloor in Eocene times (42–48 Ma). Some of these networks exhibit mutual crosscutting relationships between mylonites, foliated cataclasites, and vein systems indicating mutual overprinting between brittle deformation and ductile creep. Whole-rock chemical compositions, in situ 40Ar-39Ar age data of recrystallized phengite, and Sr isotopic signatures reveal that DBT rocks also underwent multiple hydrofracturing and metasomatic events via the infiltration of fluids mainly derived from the oceanic metasediments underneath the DBT. From the rock fabrics, we infer strain rate fluctuations of several orders of magnitude beyond subduction strain rates (∼10−12 s−1) accompanied by fluctuation of supralithostatic and quasi-lithostatic fluid pressures (1 ≥ λ > 0.95). DBT brittle-plastic deformation switches highlight the diversity of deformation processes and fluid-rock interactions in the transition zone region of the subduction interface.
ISSN: 1525-2027

hal-01243526
https://hal.archives-ouvertes.fr/hal-01243526
DOI : 10.1002/2015GC005776