Éditeur(s) : HAL CCSD American Society of Mechanical Engineers
Résumé : International audience
The isothermal flow in a model channel of plate-fin heat exchanger with periodically arranged embossed-like vortex generators is investigated. Velocity measurements are performed by LDA in the transitional regime (Reynolds number from 1000 up to 5000). Strong longitudinal vortices are observed downstream of each generator. The vortex roll-up process is highlighted by the evolution of the velocity vector field in the cross section of the flow. The modifications of the vortex characteristics after successively encountered generators are investigated. This work shows most of the flow features which are known to produce heat transfer enhancement, and shows that these smooth shaped vortex generators are very promising for enhanced heat exchangers.
ISSN: 0098-2202

hal-01582938
https://hal.archives-ouvertes.fr/hal-01582938
https://hal.archives-ouvertes.fr/hal-01582938/document
https://hal.archives-ouvertes.fr/hal-01582938/file/Dupont_heat_exchanger_JFE2002_preprint.pdf
DOI : 10.1115/1.1595675

Éditeur(s) : HAL CCSD
Résumé : Red blood cell hemodynamics influence blood rheology and thus circulatory function. Different authors showed that red blood cells are heterogeneous in blood flow. This heterogeneity could be explained by physical characteristics such as morphology, aggregability and deformability, but also by cellular and molecular environment. All these notions are found in sickle cell disease where sickle red blood cells become more rigid, leading to vascular occlusions, increased with an inflammatory context. In a preceding study, our results showed that velocity heterogeneity allow RBC classification, leading to different RBC sub-groups, using a dynamical approach and flow studies. In order to have a better understanding of the physiological meaning of such an heterogeneity, dynamical velocity experiences have been conducted in the case of normal and sickle red blood cells with different endothelial activations by proinflammatory cytokines, under a constant venular flow. Thus, normal and sickle red blood cells are classified into different sub-groups, showing their heterogeneity. Moreover, sub-population velocities and distribution evolve differently according to vascular state or treatment. These results show that red blood cell velocities and rheology depend on vascular environment and red blood cell morphology. However, the physiological meaning of this behavior should be explained by cellular and molecular effects of such activation.
https://hal.archives-ouvertes.fr/hal-00201461

hal-00201461
https://hal.archives-ouvertes.fr/hal-00201461
https://hal.archives-ouvertes.fr/hal-00201461/document
https://hal.archives-ouvertes.fr/hal-00201461/file/RBCV_Marianne_v1.pdf

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We develop a block model for the Aegean and surrounding areas, constrained by Global Positioning System (GPS), in order to investigate the degree of coupling on the Hellenic subduction interface (i.e., the fraction of the motion across the plate boundary accommodated by elastic strain accumulation). We use previously published models, and seismicity to define the geometry of the interface separating the down-going Nubian slab from the overriding Aegean. This model provides a good fit to the GPS observations; for the ∼200,000 km2 Aegean block the wrms of the residual velocities is 1.4 mm/yr for 80 GPS velocity estimates, approximately the 95% level of the GPS velocity uncertainties. We investigate the degree of coupling on the seismically active plate interface, the Hellenic trench splay fault (believed to be the source of the 365 AD Great Crete Earthquake and Tsunami), and the Kephalonia transform fault by comparing the modeled GPS residual velocity field for a range of coupling values. The GPS observations are almost insensitive to coupling on the Kephalonia transform fault, because of the vertical dip of the fault that creates interseismic deformation only close to the fault where few GPS sites exist. The absence of resolvable shortening of the leading edge of the Aegean Plate precludes coupling of more than 0.2 (20% of the full Nubia-Aegean convergence rate) on the modeled plate interface. Because of the shallow dip of the plate interface and trench splay fault, and high rate of convergence, if these boundaries were fully coupled, high elastic strain rates would be expected to extend well into the overriding Aegean plate. Based on our preferred value for the degree of coupling (0.1), and assuming characteristic earthquake behavior, we estimate a recurrence time for great earthquakes with slip similar to that for the 365 Crete event of 5700-8300 yr, consistent with the absence of subsequent great earthquakes on this segment of the subduction zone.
ISSN: 0012-821X

hal-01053486
https://hal.archives-ouvertes.fr/hal-01053486
DOI : 10.1016/j.epsl.2013.10.018

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
Our knowledge and understanding of the 3-D lithospheric structure of the Himalayas and the Tibetan Plateau is still challenging although numerous geophysical studies have been performed in the region. The GOCE satellite mission has the ambitious goal of mapping Earth's gravity field with unprecedented precision (i.e. an accuracy of 1-2 mGal for a spatial resolution of 100 km) to observe the lithosphere and upper-mantle structure. Consequently, it gives new insights in the lithospheric structure beneath the Himalayas and the Tibetan Plateau. Indeed, the GOCE gravity data now allow us to develop a new strategy for joint gravimetry-seismology inversion. Combined with teleseismic data over a large region in a joint inversion scheme, they will lead to lithospheric velocity-density models constrained in two complementary ways. We apply this joint inversion scheme to the Hi-CLIMB (Himalayan-Tibetan Continental Lithosphere during Mountain Building) seismological network which was deployed in South Tibet and the Himalayas for a 3-yr period. The large size of the network, the high quality of the seismological data and the new GOCE gravity data set allow us to image the entire lithosphere of this active area in an innovative way. We image 3-D low velocity and density structures in the middle crust that fit the location of discontinuous low S-velocity zones revealed by receiver functions in previous geophysical studies. In the deeper parts of our velocity model we image a positive anomaly interpreted to be the heterogenous Indian lithosphere vertically descending beneath the centre of the Tibetan Plateau.
ISSN: 0956-540X

hal-00858024
https://hal.archives-ouvertes.fr/hal-00858024
DOI : 10.1093/gji/ggs110

Éditeur(s) : Gauthier-Villars
Résumé : Moored current measurements carried out from 31 March 1990 to 15 September 1991 in two stages at a point (near 6 degrees N) located over the mid-continental slope off French Guiana are presented. Six current meters were positioned between 200 and 2700 m depth. Upper level mean current data showed a northwestward flowing North Brazil Current (NBC) with mean velocity values decreasing from 10 cm/s in the range 200-250 m to almost zero at 800 m depth, the level of the Antarctic Intermediate Waters. In the range 500-800 m, the current reversed in spring in the presence of the southeastward Western Boundary Under Current (WBUC); the mean velocity from February to June 1991 is around 2 cm/s. Deep currents over the continental rise show a strong southeastward Deep Western Boundary Current extending from around 1000 m depth to the bottom (3000 m depth in this case) with mean core speeds of 20 cm/s at 2000-2070 m depth. Transport estimates based on these data and a few Pegasus sections for the mean vertical and lateral extensions of the DWBC yield a value of 21 x 10(6) m(3)/s at that location. Low-frequency current fluctuations were dominated by a well-defined 50- to 70-day period oscillation with peak-to-peak northwestward velocity amplitude of around 90 cm/s at the upper level. The mean vertical eddy kinetic energy distribution showed an abrupt decrease of the energy down to 800 m depth and a slight decrease below and down to the bottom.
Oceanologica Acta (0399-1784) (Gauthier-Villars), 1994 , Vol. 17 , N. 4 , P. 345-354

Droits : info:eu-repo/semantics/openAccess
http://archimer.ifremer.fr/doc/00098/20897/18510.pdf
http://archimer.ifremer.fr/doc/00098/20897/

Éditeur(s) : HAL CCSD Wiley
Résumé : International audience
In this paper we investigate finite-frequency effects in crustal tomography. We developed an inversion procedure based on an exact numerical computation of the sensitivity kernels. In this approach we compute the 3D travel-time sensitivity kernels by using (1) graph theory and an additional bending to estimate accurately both rays and travel-times between source/receiver and diffraction points and (2) paraxial ray theory to estimate the amplitude along theses rays. We invert both the velocity and the hypocentre parameters, using these so-called banana-doughnut kernels and the LSQR iterative solver. We compare the ray-theoretical and the finite-frequency tomography to image the intermediate structures beneath the Gulf of Corinth (Greece), which has long been recognized as the most active continental rifting zone in the Mediterranean region. Our dataset consists of 451 local events with 9233 P- firstarrival times recorded in the western part of the Gulf (Aigion area) in the framework of the 3F-Corinth European project. Previous tomographic images showed a complex velocity crustal model and a low-dip surface that may accommodate the deformation. Accurate velocity models will help to better constrain the rifting process, which is still a subject of debate. The main results of this study show that finite-frequency tomography improves crustal tomographic images by providing better resolved images of the 3D complicated velocity structure. Because the kernels spread the information over a volume, finite-frequency tomography results in a sharpening of layer boundaries as we observed for the shallower part of the crust (down to 5 km depth) beneath the Gulf of Corinth.
ISSN: 0016-8025

insu-00354702
https://hal-insu.archives-ouvertes.fr/insu-00354702
DOI : 10.1111/j.1365-2478.2007.00683.x

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : Approximately 4 yr of campaign and continuous Global Positioning System (GPS) measurements across the Dead Sea fault system (DSFS) in Lebanon provide direct measurements of interseismic strain accumulation along a 200-km-long restraining bend in this continental transform fault. Late Cenozoic transpression within this restraining bend has maintained more than 3000 m of topography in the Mount Lebanon and Anti-Lebanon ranges. The GPS velocity field indicates 4-5 mm yr(-1) of relative plate motion is transferred through the restraining bend to the northern continuation of the DSFS in northwestern Syria. Near-field GPS velocities are generally parallel to the major, left-lateral strike-slip faults, suggesting that much of the expected convergence across the restraining bend is likely accommodated by different structures beyond the aperture of the GPS network (e.g. offshore Lebanon and, possibly, the Palmyride fold belt in SW Syria). Hence, these geodetic results suggest a partitioning of crustal deformation involving strike-slip displacements in the interior of the restraining bend, and crustal shortening in the outer part of the restraining bend. Within the uncertainties, the GPS-based rates of fault slip compare well with Holocene-averaged estimates of slip along the two principal strike-slip faults: the Yammouneh and Serghaya faults. Of these two faults, more slip occurs on the Yammouneh fault, which constitutes the primary plate boundary structure between the Arabia and Sinai plates. Hence, the Yammouneh fault is the structural linkage that transfers slip to the northern part of the transform in northwestern Syria. From the perspective of the regional earthquake hazard, the Yammouneh fault is presently locked and accumulating interseismic strain.
ISSN: 0956-540X

hal-00406620
https://hal.archives-ouvertes.fr/hal-00406620
DOI : 10.1111/j.1365-246X.2006.03328.x

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : This paper presents an inversion method using the interseismic velocity field to determine effective rigidity of the lithosphere. The method is based on the minimization of a cost function defined as the quadratic measure of the difference between measured and modelled velocity fields on a discrete set of points. The continuous mapping of the rigidity is fulfilled with a limited set of parameters and the forward solution is achieved using a plane stress finite element code. The computation of the cost function gradient in the parameters' space allows one to iteratively find the best parameters set through a suitable optimization algorithm.;We first design a benchmark including an abrupt rigidity variation that cannot be described by a continuous function. For such a case, we show that increasing the number of parameters is a way to accurately describe sharp variations of the rigidity map. Then, we use a dense GPS velocity field over the southwestern United States to estimate the corresponding rigidity variations for different spatial resolutions of the parameters' grid. We analyse the conceptual and practical difficulties associated with our methodology. Finally, rigidity maps obtained by our inversion method in southwestern United States and particularly across the San Andreas Fault System are reviewed and compared to current plate rigidity estimates and geophysical data over this area.
ISSN: 0956-540X

hal-00669897
https://hal.archives-ouvertes.fr/hal-00669897
DOI : 10.1111/j.1365-246X.2011.05192.x

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
Energy dissipation is observed on seismic data when a wave propagates through a porous medium, involving different frequency regimes depending on the nature of rock and fluid types. We focus here on the role of partial fluid saturation in unconsolidated porous media, looking in particular at P-wave phase velocity and attenuation. The study consists in running an experiment in a sand-filled tank partially saturated with water. Seismic propagation in the tank is generated in the kHz range by hitting a steel ball on a granite plate. Seismic data are recorded by buried accelerometers and injecting or extracting water controls the partial saturation. Several imbibition/drainage cycles were performed between the water and gas residual saturations. A Continuous Wavelet Transform applied on seismic records allowed us to extract the direct P-wave at each receiver.We observe an hysteresis in phase velocities and inverse quality factors between imbibition and drainage. Phase velocities and inverse quality factors are then jointly inverted to get a final poro-visco-elastic model of the partially saturated sand that satisfactorily reproduces the data. The model formulation consists in generalizing the Biot theory to effective properties of the fluid and medium (permeability and bulk modulus) in order to properly explain the phase velocity variation as a function of the saturation. The strong level of attenuation measured experimentally is further explained by an anelastic effect due to grain to grain sliding, adding to Biot's losses. This study shows that fluid distribution at microscopic scale has strong influence on the attenuation of direct P-waves at macroscopic scale and confirms that seismic prospection may be a powerful tool for the characterization of transport phenomena in porous media.
ISSN: 0956-540X

hal-00779920
https://hal.archives-ouvertes.fr/hal-00779920
https://hal.archives-ouvertes.fr/hal-00779920/document
https://hal.archives-ouvertes.fr/hal-00779920/file/Barriere_et_al_HAL.pdf
DOI : 10.1111/j.1365-246X.2012.05691.x

Éditeur(s) : HAL CCSD Seismological Society of America
Résumé : International audience
We present an improvement of the maximum intersection (MAXI) method in which absolute earthquake location is defined by the maximum intersection number of hyperbolic equal differential time (EDT) volumes (one EDT volume being described as all grid nodes satisfying the arrival‐time differences between two stations, ± a tolerance value known as TERR). This 3D technique is well adapted to a strongly heterogeneous environment, avoids the depth versus origin‐time trade‐off (even using P arrivals alone), and objectively filters possible erroneous arrival times. Improvements consist of introducing an iterative multiscale approach on the TERR parameter and conducting a hierarchy of grid discretization to refine the preliminary solution (multigrid algorithm). The outlier cleaning process is strengthened by conducting statistical analyses based on the number of EDT volume intersections per station, rather than on travel‐time residues. Processing two series of synthetic arrival times computed in the 3D seismological configuration of the southernmost Ryukyu subduction zone, offshore Taiwan, allows us to (1) confirm MAXI robustness, even when arrival times are highly disturbed or azimuthal coverage largely reduced, and (2) show that MAXI, by limiting trade‐offs between origin time and depth and between epicentral position and depth, is less affected by a wrong velocity model than a technique that minimizes travel‐time residues. To conclude, we apply the MAXI method to locate earthquakes recorded by the combined Central Weather Bureau of Taiwan (CWB) and the Japanese Meteorological Agency (JMA) networks (1991-2008) within a georealistic a priori 3D P‐velocity model. Hypocenter determinations are selected based on MAXI confidence factors, and earthquake clustering along well‐known tectonic features witnesses hypocenter determination accuracy.
ISSN: 0037-1106

hal-00725227
https://hal.archives-ouvertes.fr/hal-00725227
DOI : 10.1785/0120100311

Éditeur(s) : HAL CCSD
Résumé : International audience
The Corinth Rift is the most seismically active zone in Europe. The area is characterized by very localized NSextension at a rate of1.5cm/year, the occurrence of frequent and intensive microseismic crises and occasionalmoderate to large earthquakes like in 1995 (Mw=6.1).Since the year 2000, the Corinth Rift Laboratory (CRL, http://crlab.eu) consisting in a multidisciplinary naturalobservatory, aims at understanding the mechanics of faulting and earthquake nucleation in the Rift. Recent studieshave improved our view about fault geometry and mechanics within CRL, but there is still a critical need for a betterknowledge of the structure at depth both for the accuracy of earthquake locations and for mechanical interpretationof the seismicity.In this project, we aim to analyze the complete seismological database (13 years of recordings) of CRL by usingrecently developed methodologies of structural imaging, in order to determine at the same time and with highresolution, the local 3D structure and the earthquake locations.We perform an iterative joint determination of 3D velocity model and earthquake coordinates. In a first step, Pand S velocity models are determined using first arrival time tomography method proposed by Taillandier et al.(2009). It consists in the minimization of the cost function between observed and theoretical arrival times which isachieved by the steepest descent method (e.g. Tarantola 1987). This latter requires computing the gradient of thecost function by using the adjoint state method (Chavent 1974). In a second step, earthquakes are located in thenew velocity model with a non-linear inversion method based on a Bayesian formulation (Gesret et al. 2015). Step1 and 2 are repeated until the cost function no longer decreases.We present preliminary results consisting in: (1) the adjustement of a 1D velocity model that is used as initialmodel of the 3D tomography and (2) a first attempt of the joint determination of 3D velocity model and earthquakelocation.In addition to the tomographic imaging, we perform a preliminary receiver function analysis of teleseismic datarecorded by the broadband stations of the CRL network. The RF analysis should provide the interface depthsbeneath seismometers and increase the imaging resolution of the upper crustal structures provided by the 3Dtomography. In this first attempt, we adjust the 1D velocity model that produces a synthetic RF as similar aspossible to the observed RF for a subset of data. We compare the identified interfaces with structures imaged bythe tomography.
EGU general assembly 2016
Vienne, Austria

hal-01306224
https://hal-mines-paristech.archives-ouvertes.fr/hal-01306224

Éditeur(s) : American Geophysical Union
Résumé : [1] During the Zoneco 11 marine geophysical survey (September 2004), two deep reflection seismic profiles recorded by ocean bottom seismometers were acquired in the offshore domain west of New Caledonia. The northern profile crosses the New Caledonia Basin, the Fairway Ridge, the Fairway Basin, and the Lord Howe Rise. The southern profile crosses the Norfolk Rise south of New Caledonia, the New Caledonia Basin, the Fairway Ridge and Basin, and ends at the foot of Lord Howe Rise. On the northern profile the Lord Howe Rise has a crustal thickness of 23 km and exhibits seismic velocities and velocity gradients characteristic of continental crust. The crust thins to 12-15 km in the neighboring Fairway Basin, which is interpreted to be of thinned continental origin based on the seismic velocities. The crustal thickness of the Fairway Rise is 22 km, and it is also interpreted to be of continental origin. The New Caledonian Basin is underlain by crust of 10 km thickness, which shows unusally high velocities (between 7.0 and 7.4) uncharacteristic for either thinned continental or oceanic crust. On the southern profile the Norfolk Rise is also found to be of continental nature. Here, the New Caledonia Basin shows velocities, crustal thickness, and basement roughness characteristic of typical oceanic crust. The crust in the Fairway Basin shows higher velocities than on the northern profile, which could be caused by volcanic intrusions into the crust during extension. A deep reflector in the upper mantle was imaged underneath the New Caledonian Basin on the northern profile.
Journal of Geophysical Research - Solid earth (0148-0227) (American Geophysical Union), 2007-11 , Vol. 112 , N. B11102 , P. NIL_71-NIL_88

Droits : 2007 American Geophysical Union
http://archimer.ifremer.fr/doc/2007/publication-3543.pdf
DOI:10.1029/2007JB005093
http://archimer.ifremer.fr/doc/00000/3543/

Éditeur(s) : HAL CCSD Taylor & Francis: SSH Journals
Résumé : International audience
We analysed stroke phases and arm and leg coordination during front crawl swimming with and without a wet suit. Twelve nationally and internationally ranked French male triathletes performed three swim trials in randomized order using the front crawl stroke with and without a wet suit. All triathletes swam at three different swim velocities, corresponding to the paces appropriate for the 800 m (V800), 100 m (V100) and 50 m (V50) events. The different stroke phases and arm and leg coordination were identified by video analysis. Arm coordination was quantified using a new index of coordination, which expresses the three major modalities of opposition, catch-up and superposition in swimming. At all swim velocities, no significant differences in leg movements with or without the wet suit were noted. However, the wearing of the wet suit was associated with a significantly greater stroke length at the paces appropriate for the 100 and 50 m events (+3.46% and +3.10% at V100 and V50, respectively; P<0.01); a significantly greater stroke index at all three velocities (+5.18%, +5.21% and +5.91% at V800, V100 and V50, respectively; P<0.01); a significantly shorter pulling phase (-10.97%; P<0.05) and lower index of coordination (-21.87%; P<0.01) at the pace appropriate for the 800 m; and a significantly greater entry and catch phase (+9.81%; P<0.05) at the pace appropriate for the 100 m. We conclude that the wet suit amplified the coordination mode of the triathletes (i.e. catch-up coordination) without modifying stroke rate, recovery phase or leg movements.
ISSN: 0264-0414

hal-00720724
https://hal.univ-antilles.fr/hal-00720724

Éditeur(s) : Elsevier
Résumé : The fining upward trend commonly described on levees of turbidite systems can be either attributed to changes in the sediment supply (external forcing = allocyclic) or changes in the spillover processes related to the growth of the levee (internal forcing = autocyclic). However the real causes remain speculative and difficult to demonstrate. Knowledge of vertical change in flow velocity (or grain size) in turbidity currents, of the turbidity current's height, as well as the growth rate of a levee are theoretically sufficient to describe the evolution of the grain size of a leveed turbidite sequence deposited by spillover processes. A piston core (MD99-2344) retrieved on the right levee of the Petit-Rhone neofan, sampled an 8.50 m long turbidite sequence containing more than one hundred turbidite beds and showing a marked fining upward trend. With the help of two profiles describing respectively the vertical velocity [Stacey, M. and Bowen, A.J., 1988b. The vertical structure of turbidity currents and a necessary condition for self-maintenance, Journal of Geophysical Research, pp. 3543-3553.] and the vertical grain size [Migeon, S., 2000. Dunes geantes et levees sedimentaires en domaine marin profond: approche morphologique, sismique et sedimentologique. PhD Thesis, Universite Bordeaux 1, Talence, France, 288 pp.] of a turbidity current, and a simple graphical method, we test several hypotheses on the height of the turbidity current and on the grain size at the bottom of the turbidity current and we attempt to reproduce the vertical fining upward trend. Our results show that the fining upward trend of the turbidite facies can be explained by the aggradation of the turbidite levee and the gradual confinement of the turbidity currents in the channel. This is, therefore, an autocyclical phenomenon. However a high frequency variability of the grain size overprinted on the trend cannot be explained by internal forcing and is believed to be allocyclical, depending on changes to the sediment input. The vertical grain-size profile allows more realistic flow conditions to be determined and shows that the vertical velocity profile does not describe the ability of turbidity current to transport sediment. This simple graphical method allows a better understanding and quantification of the forcing on turbidite deposits and improves description of the characteristics of the turbidity currents from the grain size of the deposits.
Marine Geology (0025-3227) (Elsevier), 2006-12 , Vol. 234 , N. 1-4 , P. 191-213

Droits : 2006 Elsevier
http://archimer.ifremer.fr/doc/2006/publication-2311.pdf
DOI:10.1016/j.margeo.2006.09.019
http://archimer.ifremer.fr/doc/00000/2311/

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
A network of continuous GPS stations has been installed in NW Iran since 2005 to complement the survey GPS network already existing in the region. We present the 1999-2009 GPS-derived velocity field for this region based on the continuous and survey-mode observations. The results confirm a right lateral slip of 7 +/- 1 mm/yr for the North Tabriz fault, in agreement with previous studies. This rate is consistent with earthquakes of magnitude 7-7.3 and recurrence times of 250-300 yr. The higher spatial coverage of the new network shows that deformation is localized in the vicinity of the Chalderan, south Gailatu-Siah Cheshmeh-Khoy fault and the North Tabriz fault. However the eastern end of the North Tabriz fault appears to cross Mount Bozgush rather than following its southern foothills. This new velocity field does not indicate the 8 mm/yr of NNE-SSW extension suggested earlier for the region, but rather shows lower extension of 1-2 +/- 1 mm/yr across the eastern segment of the North Tabriz fault and the Talesh. To the west, the Chalderan and the western North Tabriz fault segment act like pure strike slip faults without significant extension or compression. The denser network in the Rudbar earthquake region (Ms 7.3, 1992) shows no significant motion across the fault, suggesting that the recurrence time of earthquakes like the Rudbar event must be very long. The lack of substantial compressive strain and the sharp azimuth change of the velocity vectors in the transition zone from Arabia to Lesser Caucasus motion imply that processes other than "extrusion", possibly related to old subduction or delamination, contribute to active deformation.
ISSN: 0012-821X

hal-00617666
https://hal.archives-ouvertes.fr/hal-00617666
DOI : 10.1016/j.epsl.2011.04.029

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
An active seismic experiment has been conducted across the southern Ryukyu margin east of Taiwan over the whole trench-arc-backarc system in May 2009. Twenty-four ocean bottom seismometers (OBS) were deployed from the Ryukyu trench to the southern Okinawa trough over the Ryukyu arc and forearc. Wide angle seismic data were recorded by the OBS array while coincident reflection seismic data were acquired using a 6 km long streamer and a 6600 cubic inch seismic airgun array. Results from tomographic inversion of 21091 travel time picks along this line allowed us to image crustal structures of the Ryukyu margin down to a depth of 25 km. The transect has been designed to provide a better seismic velocity structure of the subduction zone in a highly deformed area that has produced an M8 earthquake in 1920. The line crosses a seismic cluster of earthquakes which source mechanisms are still poorly understood. The subducting oceanic crust of the Huatung Basin is about 5-6 km thick. The underlying mantle exhibits low seismic velocities around 7.8 km/s suggesting some hydrothermal alterations or alteration of the upper mantle through faults generated by the flexure of the subducting plate as it enters the subduction. Low velocities, up to 4.5 km/s, associated with the accretionary wedge are well imaged from the trench back to the Nanao forearc. A major result concerns the abrupt termination of the buttress at the rear of the accretionary wedge. Despite the low resolution of the tomographic inversion near the subduction interface, several lines of evidence supporting the presence of a low velocity zone beneath the toe of the forearc buttress could be established. The Moho beneath the Ryukyu non-volcanic arc is located at a depth around 25 km depth.
ISSN: 0040-1951

hal-00795573
https://hal.archives-ouvertes.fr/hal-00795573
DOI : 10.1016/j.tecto.2011.10.010

Éditeur(s) : HAL CCSD Elsevier
Résumé : Obduction processes, though spectacular (dense oceanic ophiolites are emplaced on top of light, continental rocks along thousands of km), have been little elucidated since the advent of plate tectonics. Based on convergence velocities and blueschist formation, we show that the two recent large-scale, Upper Jurassic and Upper Cretaceous obductions coincided with periods during which velocities increased abruptly and more than doubled. The latter obduction also modified the interplate coupling across adjacent subduction zones. We critically propose a mechanism in which large-scale obductions are triggered by intraplate instabilities resulting from sharp plate accelerations, possibly in response to superplume events
ISSN: 0012-821X

hal-00407960
https://hal.archives-ouvertes.fr/hal-00407960
DOI : 10.1016/j.epsl.2007.04.002

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
I use GPS interseismic velocities and classic 2D elastic half-space models with a screw dislocation to estimate the long-term fault slip rate, locking depth, and the offset between the surface fault trace and the location of the dislocation below the seismogenic zone for 13 segments along 8 major strike-slip faults. Using deduced strike-slip rates and the position of the dislocation to normalize the interseismic velocities to facilitate comparison of spatial patterns of deformation, I show that no substantial differences can be detected, ruling out a large asymmetry in interseismic velocities across the 8 faults used in this study. Only the Carrizo Plain segment of the San Andreas Fault shows a significant asymmetry that cannot be explained by shifting the position of the dislocation at depth relative to the fault trace. However, the resulting perturbation is less than 10% of total strike-slip rate. Fault traces are usually curved, defining a concave side. When the dislocation at depth is significantly offset from the fault trace, the shift is always toward the block on the concave side of the fault trace. This suggests that the fault zone in the lower crust may develop a simpler geometry more consistent with relative motion across the fault than its upper seismogenic part constrained by the structural complexity of the brittle crust. Since the faults used in this study are at different times in their interseismic period, comparing the interseismic velocity fields across them allows identification of possible variations of the interseismic velocities with time. When normalized by slip rate and dislocation location, all the faults show the same interseismic strain with no significant differences between deduced locking depths. These comparisons suggest that if temporal variations occur as suggested by some dynamic earthquake cycle models, they are small and below the accuracy of the available geodetic measurements.
ISSN: 0040-1951

hal-01171753
https://hal.archives-ouvertes.fr/hal-01171753
DOI : 10.1016/j.tecto.2015.01.013

Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
The South Pacific region is characterized by a broadly elevated seafloor known as the South Pacific superswell. This region has a concentration of midplate volcanoes that experienced massive eruptions in the mid-Cretaceous period (90-120 Ma). These characteristics suggest the presence of a large-scale mantle plume beneath the South Pacific, called the South Pacific superplume. The geometry, origin depth, temperature, and composition of the superplume remain controversial, however, mainly due to the lack of seismological data that documents the mantle structure beneath the South Pacific. Seismic stations are sparse in the area due to its remote ocean environment. To obtain a better seismic image of the superplume, we deployed temporary broadband seismographs on oceanic islands and the seafloor in the South Pacific, which made possible the highest spatial resolution that has ever been achieved for the mantle structure beneath the region. The seismic image obtained from this new seismic data indicates that large-scale low-velocity anomalies (on the order of 1000 km in diameter), indicative of the superplume, are located from the bottom of the mantle to a depth of 1000 km, and small-scale low-velocity anomalies (on the order of 100 km in diameter) are present above it. A comparison of the seismic image with recent mantle convection studies based upon laboratory and numerical experiments suggests that the superplume may be a hot and chemically distinct mantle dome, and that the small-scale anomalies may be narrow plumes generated from the top of the dome. This model may explain various characteristics of hot spots in the South Pacific, such as the seafloor swell, short-lived hot spot chains, and the periodicity of massive eruptions.
ISSN: 1525-2027

hal-00443845
https://hal.archives-ouvertes.fr/hal-00443845
https://hal.archives-ouvertes.fr/hal-00443845/document
https://hal.archives-ouvertes.fr/hal-00443845/file/Suetsugu_PLUME_tomo_G32009_hal.pdf
DOI : 10.1029/2009GC002533

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
It is unclear whether vascular function is affected similarly in children with sickle cell anaemia (SS) and children with sickle haemoglobin C (SC) disease. Therefore, we compared micro and macrovascular functions in healthy (AA) children, children with SS and SC disease, and assessed their association with physical activity. Participants (24 SS, 22 SC and 16 AA), were compared in terms of 1) thermal hyperaemic response (finger pad warming to 42 °C) measured by Laser Doppler techniques, 2) arterial stiffness determined by pulse wave velocity, 3) daily energy expenditure related to moderate and intense physical activities estimated by questionnaire and 4) fitness level, evaluated by the six-minute walk test. Response to heating differed between SS, SC and controls. Peripheral microvascular reactivity was lower and pulse wave velocity higher in SS compared to AA. SC had blunted microvascular reactivity in response to heating compared to AA but pulse wave velocity was not different within the two groups. Physical activity and fitness levels were markedly lower in sickle cell patients compared to healthy controls but no association was observed with vascular function. Microvasodilatory reserve is decreased in both SS and SC patients but only SS patients were also characterised by impaired macrovascular function.
ISSN: 1079-9796

hal-01496857
https://hal.archives-ouvertes.fr/hal-01496857
https://hal.archives-ouvertes.fr/hal-01496857/document
https://hal.archives-ouvertes.fr/hal-01496857/file/Mo%CC%88ckesch%20et%20al%20BCMD%20non%20apparent%20corrections%20final.pdf
DOI : 10.1016/j.bcmd.2017.02.001