Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : This paper presents an inversion method using the interseismic velocity field to determine effective rigidity of the lithosphere. The method is based on the minimization of a cost function defined as the quadratic measure of the difference between measured and modelled velocity fields on a discrete set of points. The continuous mapping of the rigidity is fulfilled with a limited set of parameters and the forward solution is achieved using a plane stress finite element code. The computation of the cost function gradient in the parameters' space allows one to iteratively find the best parameters set through a suitable optimization algorithm.;We first design a benchmark including an abrupt rigidity variation that cannot be described by a continuous function. For such a case, we show that increasing the number of parameters is a way to accurately describe sharp variations of the rigidity map. Then, we use a dense GPS velocity field over the southwestern United States to estimate the corresponding rigidity variations for different spatial resolutions of the parameters' grid. We analyse the conceptual and practical difficulties associated with our methodology. Finally, rigidity maps obtained by our inversion method in southwestern United States and particularly across the San Andreas Fault System are reviewed and compared to current plate rigidity estimates and geophysical data over this area.
ISSN: 0956-540X

hal-00669897
https://hal.archives-ouvertes.fr/hal-00669897
DOI : 10.1111/j.1365-246X.2011.05192.x

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The extent of the global human footprint [ 1 ] limits our understanding of what is natural in the marine environment. Remote, near-pristine areas provide some baseline expectations for biomass [ 2, 3 ] and suggest that predators dominate, producing an inverted biomass pyramid. The southern pass of Fakarava atoll—a biosphere reserve in French Polynesia—hosts an average of 600 reef sharks, two to three times the biomass per hectare documented for any other reef shark aggregations [ 4 ]. This huge biomass of predators makes the trophic pyramid inverted. Bioenergetics models indicate that the sharks require ∼90 tons of fish per year, whereas the total fish production in the pass is ∼17 tons per year. Energetic theory shows that such trophic structure is maintained through subsidies [ 5–9 ], and empirical evidence suggests that sharks must engage in wide-ranging foraging excursions to meet energy needs [ 9, 10 ]. We used underwater surveys and acoustic telemetry to assess shark residency in the pass and feeding behavior and used bioenergetics models to understand energy flow. Contrary to previous findings, our results highlight that sharks may overcome low local energy availability by feeding on fish spawning aggregations, which concentrate energy from other local trophic pyramids. Fish spawning aggregations are known to be targeted by sharks, but they were previously believed to play a minor role representing occasional opportunistic supplements. This research demonstrates that fish spawning aggregations can play a significant role in the maintenance of local inverted pyramids in pristine marine areas. Conservation of fish spawning aggregations can help conserve shark populations, especially if combined with shark fishing bans.
ISSN: 0960-9822

hal-01359391
https://hal-univ-perp.archives-ouvertes.fr/hal-01359391
DOI : 10.1016/j.cub.2016.05.058

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
The interpretation of coseismic surface deformation measurements through inversion techniques is of major importance to understand the mechanical behaviour of a seismic fault. Dense geodetic data sets in the vicinity of the ruptured fault provide unique constraints on detailed fault geometry and slip distribution at depth, making them complementary to seismological data. Bam earthquake (Mw 6.6, 2003 December 26) induced surface deformation has been precisely mapped by Envisat ASAR interferometry and by subpixel correlation techniques applied to Spot-5 and ASAR amplitude images. These oblique and horizontal estimations of deformation have been completed with one levelling profile along the main road crossing the rupture from west to east. We process these data (separately and jointly) in a two-step inversion technique, within the elastic half-space theory framework. Our objective is to determine the dislocation model at depth that satisfies simultaneously all the geodetic constraints. Also, we estimate the relative contribution of each geodetic data set to this inversion process.We first use a stochastic direct approach called neighbourhood algorithm in order to estimate the average characteristics of the rupture, and their relative uncertainty. Constraining in this way the geometry of the ruptured fault, we then linearize the inverse problem and compute the slip distribution on the fault using a standard weighted least-square technique, assuming the solution is smooth to some degree. At each step, we discuss the optimal models, their stability as well as the relative influence of each data set on the derived models parameters. Our preferred model reveals a shallow dislocation on a quasi-vertical fault, slightly dipping towards east. The slip vector has a strike-slip component as high as 2 m, while the dip-slip component seems negligible.However, the estimation of the resolution matrices emphasizes the fact that the details of deep fault slip distribution remain out of the scope of this ill-conditioned inverse problem. Yet, our preferred model suggests a main dislocation limited at depth between 1 and 6 km. By contrast, the aftershocks observed in the months following the earthquake are located just beneath the estimated main shock.
ISSN: 0956-540X

hal-00314173
https://hal.archives-ouvertes.fr/hal-00314173
https://hal.archives-ouvertes.fr/hal-00314173/document
https://hal.archives-ouvertes.fr/hal-00314173/file/GJI-2007-169-849-briole.pdf
DOI : 10.1111/j.1365-246X.2007.03358.x

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
Energy dissipation is observed on seismic data when a wave propagates through a porous medium, involving different frequency regimes depending on the nature of rock and fluid types. We focus here on the role of partial fluid saturation in unconsolidated porous media, looking in particular at P-wave phase velocity and attenuation. The study consists in running an experiment in a sand-filled tank partially saturated with water. Seismic propagation in the tank is generated in the kHz range by hitting a steel ball on a granite plate. Seismic data are recorded by buried accelerometers and injecting or extracting water controls the partial saturation. Several imbibition/drainage cycles were performed between the water and gas residual saturations. A Continuous Wavelet Transform applied on seismic records allowed us to extract the direct P-wave at each receiver.We observe an hysteresis in phase velocities and inverse quality factors between imbibition and drainage. Phase velocities and inverse quality factors are then jointly inverted to get a final poro-visco-elastic model of the partially saturated sand that satisfactorily reproduces the data. The model formulation consists in generalizing the Biot theory to effective properties of the fluid and medium (permeability and bulk modulus) in order to properly explain the phase velocity variation as a function of the saturation. The strong level of attenuation measured experimentally is further explained by an anelastic effect due to grain to grain sliding, adding to Biot's losses. This study shows that fluid distribution at microscopic scale has strong influence on the attenuation of direct P-waves at macroscopic scale and confirms that seismic prospection may be a powerful tool for the characterization of transport phenomena in porous media.
ISSN: 0956-540X

hal-00779920
https://hal.archives-ouvertes.fr/hal-00779920
https://hal.archives-ouvertes.fr/hal-00779920/document
https://hal.archives-ouvertes.fr/hal-00779920/file/Barriere_et_al_HAL.pdf
DOI : 10.1111/j.1365-246X.2012.05691.x

Éditeur(s) : HAL CCSD Wiley
Résumé : International audience
In this paper we investigate finite-frequency effects in crustal tomography. We developed an inversion procedure based on an exact numerical computation of the sensitivity kernels. In this approach we compute the 3D travel-time sensitivity kernels by using (1) graph theory and an additional bending to estimate accurately both rays and travel-times between source/receiver and diffraction points and (2) paraxial ray theory to estimate the amplitude along theses rays. We invert both the velocity and the hypocentre parameters, using these so-called banana-doughnut kernels and the LSQR iterative solver. We compare the ray-theoretical and the finite-frequency tomography to image the intermediate structures beneath the Gulf of Corinth (Greece), which has long been recognized as the most active continental rifting zone in the Mediterranean region. Our dataset consists of 451 local events with 9233 P- firstarrival times recorded in the western part of the Gulf (Aigion area) in the framework of the 3F-Corinth European project. Previous tomographic images showed a complex velocity crustal model and a low-dip surface that may accommodate the deformation. Accurate velocity models will help to better constrain the rifting process, which is still a subject of debate. The main results of this study show that finite-frequency tomography improves crustal tomographic images by providing better resolved images of the 3D complicated velocity structure. Because the kernels spread the information over a volume, finite-frequency tomography results in a sharpening of layer boundaries as we observed for the shallower part of the crust (down to 5 km depth) beneath the Gulf of Corinth.
ISSN: 0016-8025

insu-00354702
https://hal-insu.archives-ouvertes.fr/insu-00354702
DOI : 10.1111/j.1365-2478.2007.00683.x

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We review the evolution of concepts on and methods of estimating the state of stress from fault movements. Theories of failure in isotropic materials suggested a simple geometrical construction of optimal principal stress directions from a fault plane and its associated slip. These optimal directions align shear stress and slip directions and maximize the difference between shear stress and frictional resistance on the fault plane. Optimal stress directions for calcite twinning are obtained by a similar construction, with the difference that they maximize shear stress. Force representation of seismic sources independently introduced pressure, P, and tension, T, axes at positions that also maximize shear stress on both nodal planes. Frictional slip theory and the constraint that slip and shear stress directions be parallel allowed to address reactivation of pre-existing faults. This suggested that stress could also be inverted from reactivated fault and slip data or earthquake focal mechanisms. Early methods relied on geometrical constructions as a substitute for calculations, whereas later methods relied on software as these calculations became tractable with the help of computers. Similar methods were developed for the inversion of stress from crystal twin gliding with non-optimal geometry, with a different criterion that relies on a threshold of the component of shear stress along the gliding line. Even though these methods seek a common stress tensor compatible with fault and slip data, their main use is to separate polyphase data into homogeneous subsets and help deciphering complex tectonic histories. Fault and slip data can also be analyzed to constrain the strain rather than the stress tensor. In most cases this involves a summation and yields an average strain for the considered rock volume. Stress inversion thus appears better suited for differentiating heterogeneous data whereas strain analysis appears better suited for homogenizing them.
ISSN: 0040-1951

hal-00759043
https://hal.archives-ouvertes.fr/hal-00759043
DOI : 10.1016/j.tecto.2012.02.009

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Taking advantage of recent developments in the theory of generalized differentiation, we present an inverse mapping theorem for set-valued maps and prove its stability under small linear perturbations. Using variational convergences of set-valued mappings, we present as well an approximate version of our inverse theorem.
Journal of Mathematical Analysis and applications

hal-01023227
https://hal.archives-ouvertes.fr/hal-01023227
DOI : 10.1016/j.jmaa.2014.07.006

Éditeur(s) : HAL CCSD
Résumé : Two major findings emerge from the theoretical analysis of Transport-Tourism link via a game theory type model of capacity coordination. Firstly the model explains the optimal capacities ratio of Transport and Tourism by the quotient of the ratio of tourism type (ratio of the length of stay in the destination and of transport duration) divided by the installation costs ratio (of transport and tourism).The corollary of this first finding gives the second outcome: The optimal transport and Tourism profit ratio is the product of the ratio of the type of tourism by the index of overcapacity conditions (a non linear combination of installation costs, and durations). From these results, it follows an interpretive grid that allows, according to tourism types, firstly to identify the optimal overcapacities by the difference between installation costs; and secondly the equilibrium ratio of profits according to the overcapacity direction and the tourism types.
Deux résultats ressortent de l’analyse théorique du lien Transport-tourisme via un modèle de coordination des capacités : l’expression et les déterminants des capacités et des profits optimaux relatifs du Transport et du Tourisme. L’article démontre que le rapport des capacités optimales de transport et de tourisme dépend du ratio comparatif de leurs coûts d’installation à celui inversé de leur poids relatif. Ce premier résultat a pour corollaire le second : le rapport d’équilibre des profits est le produit des indicateurs du type de tourisme (le ration des temps respectifs dans le transport et dans la destination) de la destination par celui identifiant les conditions de surcapacité relative. De ces résultats généraux, il suit une grille d’interprétation qui permet d’identifier d’abord le rapport optimal des capacités selon l’écart entre les coûts d’installation et le type de tourisme ; et ensuite le rapport d’équilibre des profits selon les sens des surcapacités relatives et le types de tourisme.
https://hal.univ-antilles.fr/hal-01265798

Droits : info:eu-repo/semantics/OpenAccess
hal-01265798
https://hal.univ-antilles.fr/hal-01265798
https://hal.univ-antilles.fr/hal-01265798/document
https://hal.univ-antilles.fr/hal-01265798/file/TOURISME-TRANSPORT%20-%20CAPACITY%20COORDINATION%20VERS%20FRANC.pdf

Éditeur(s) : HAL CCSD
Résumé : Transposable elements play a major role in the evolution of eukaryotic genomes. Knowing the distribution of transposable elements between different species within the same taxon is essential to study their dynamics and to better understand their role in the evolution of species. Given their abundance, species diversity and living environment, crustaceans are an excellent model for studying comparative genomics of retrotransposons. It is notably in the squat lobsters that the GalEa clade of Superfamily Copia was defined. We studied the distribution of two well-known LTR retrotransposons superfamilies: Gypsy and Copia, in crustaceans. By combining PCRs with degenerate primers and in silico analysis, we identified 35 families of Copia retrotransposons and 46 families of Gypsy retrotransposons in 15 and 18 species of crustaceans (mainly Malacostraca: crabs, shrimp, krill ...). These elements have different distribution and diversity in crustaceans. Gypsy elements appear relatively commonly and diverse in all species. Conversely, the Copia elements seem rare, and consequently more difficult to detect, and are largely dominated by the elements of the clade GalEa. These results suggest two different dynamic strategies for retrotransposons Gypsy (the Red Queen theory) and retrotransposons GalEa (‘domino days spreading’ branching process). In addition, GalEa elements present a great evolutionary success being widely distributed in many branches of metazoans. They are also present in certain red algae and we have also detected them in Fungi. Taking advantage of the large amount of available genomic data, we have studied the distribution of GalEa elements of Fungi, in order to compare it with the results obtained in crustaceans. In fact, they appear only in a large phylum of Ascomycetes, in Pezizomycotina, and they form a monophyletic group within the GalEa. Finally, in the Fungi, the GalEa elements are not majority among Copia retrotransposons. We have therefore initiated a new study in molluscs, to define if the results obtained in crustaceans are a feature of GalEa elements, Malacostraca or metazoans.
Les éléments transposables jouent un rôle majeur dans l’évolution des génomes eucaryotes. La connaissance de la distribution des éléments transposables entre différentes espèces au sein d’un même taxon est une condition essentielle pour étudier leur dynamique et mieux comprendre leur rôle dans l'évolution des espèces. Compte tenu de leur abondance, de leur diversité spécifique et de milieu de vie, les crustacés sont un excellent modèle pour étudier la génomique comparative des rétrotransposons. C’est notamment chez les Galathées qu’a été défini le clade GalEa des éléments de la superfamille des Copia. Nous avons étudié la distribution de deux superfamilles de rétrotransposons à LTR bien connus: les Gypsy et les Copia, au sein des crustacés. En combinant des PCRs avec amorces dégénérées et des analyses in silico, nous avons identifié 35 familles de rétrotransposons Copia et 46 familles de rétrotransposons Gypsy dans respectivement 15 et 18 espèces de crustacés (principalement des malacostracés : crabes, crevettes, krill...). Ces éléments présentent une distribution et une diversité différentes au sein des crustacés. Les éléments Gypsy apparaissent relativement fréquents et diversifiés dans toutes les espèces. A l’inverse, les éléments Copia semblent rares, donc difficilement détectables, et sont largement dominés par les éléments du clade GalEa. Ces résultats suggèrent deux stratégies différentes de dynamique pour les rétrotransposons Gypsy (théorie de la Reine Rouge) et les rétrotransposons GalEa (‘domino days spreading’ branching process). De plus, les éléments GalEa présentent un grand succès évolutif en étant largement distribués dans de nombreuses branches de métazoaires. Ils sont aussi présents chez quelques algues rouges et nous en avons également détecté chez des Fungi. Profitant des nombreuses données génomiques disponibles, nous avons donc étudié la distribution des éléments GalEa de Fungi, dans le but de comparer celle-ci aux résultats obtenus chez les crustacés. En fait, ils n’apparaissent qu’au sein d’un grand embranchement d’ascomycètes, les Pezizomycotina, et ils forment un groupe monophylétique au sein des GalEa. Enfin, chez les Fungi, les éléments GalEa ne sont pas majoritaire parmi les rétrotransposons Copia. Nous avons donc initié une nouvelle étude chez les mollusques, afin de définir si les résultats obtenus chez les crustacés sont une caractéristique des éléments GalEa, des malacostracés ou des métazoaires.
https://tel.archives-ouvertes.fr/tel-01132413

NNT : 2015PA066017
tel-01132413
https://tel.archives-ouvertes.fr/tel-01132413
https://tel.archives-ouvertes.fr/tel-01132413/document
https://tel.archives-ouvertes.fr/tel-01132413/file/these_archivage_2600252o.pdf

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
P>The Strait of Hormuz area is a transition zone between the continental collision of the Zagros (west) and the subduction of an oceanic part of the Arabian Plate beneath the Makran wedge (east). Geology and recent GPS measurements indicate that about 15 mm yr-1 of relative motion in N10 degrees E direction is accommodated by two major fault systems: (1) the NNW-trending Minab-Zendan-Palami (MZP) fault system that connects the Main Zagros Thrust (MZT) to the inner Makran thrust system and the Frontal subduction thrust and (2) the N-trending Sabzevaran-Kahnuj-Jiroft (SKJ) fault system that bounds the Jazmurian depression to the west. We use dense GPS measurements along four transects across these fault systems in order to determine the strains spatial distribution. The northern GPS transect confirms the total fault slip rates for both fault systems estimated by the tectonic analyses (about 10 and 7.3 mm yr-1 in N10 degrees direction across the MZP and SKJ fault systems, respectively). For both fault systems, the elastic deformation spreads over shear zones that are several tens of kilometres wide. However, transects located close to latitude 27 degrees N reveal a much narrower shear zone (similar to 10 km) for the MZP fault system. Moreover, we confirm that most of the present-day strain is transferred towards the frontal subduction thrust rather than towards the inner Makran thrusts. In order to complement this new GPS velocity field with spatially dense measurements, we processed a set of ERS radar images by the radar interferometry (InSAR) technique. We used both a 'stacking' and a 'persistant-scatterers' approach to differentiate the ground deformation signal which spatial gradient is expected to be very low, from the atmospheric signal. Results from these interferograms appear to be relatively in agreement with the GPS-determined strain distribution. Nevertheless, they confirm the absence of any superficial creep behaviour since no sharp discontinuity on interferometric phase can be noted on any interferogram. Finally, we use a purely kinematic 'block model' inversion process to calculate slip rates and locking depths for each fault system from our GPS measurements. These models suggest that the relative quiescence over the last 200 yr has certainly produced a slip deficit as high as 2 m. So, we may wonder if the MZP fault system is not late in the interseismic phase of its earthquake cycle.
ISSN: 0956-540X

hal-00429386
https://hal.archives-ouvertes.fr/hal-00429386
DOI : 10.1111/j.1365-246X.2009.04321.x

Éditeur(s) : HAL CCSD
Résumé : Two major findings emerge from the theoretical analysis of Transport-Tourism link via a game theory type model of capacity coordination. Firstly the model explains the optimal capacities ratio of Transport and Tourism by the quotient of the ratio of tourism type (ratio of the length of stay in the destination and of transport duration) divided by the installation costs ratio (of transport and tourism).The corollary of this first finding gives the second outcome: The optimal transport and Tourism profit ratio is the product of the ratio of the type of tourism by the index of overcapacity conditions (a non linear combination of installation costs, and durations). From these results, it follows an interpretive grid that allows, according to tourism types, firstly to identify the optimal overcapacities by the difference between installation costs; and secondly the equilibrium ratio of profits according to the overcapacity direction and the tourism types.
Deux résultats ressortent de l’analyse théorique du lien Transport-tourisme via un modèle de coordination des capacités : l’expression et les déterminants des capacités et des profits optimaux relatifs du Transport et du Tourisme. L’article démontre que le rapport des capacités optimales de transport et de tourisme dépend du ratio comparatif de leurs coûts d’installation à celui inversé de leur poids relatif. Ce premier résultat a pour corollaire le second : le rapport d’équilibre des profits est le produit des indicateurs du type de tourisme (le ration des temps respectifs dans le transport et dans la destination) de la destination par celui identifiant les conditions de surcapacité relative. De ces résultats généraux, il suit une grille d’interprétation qui permet d’identifier d’abord le rapport optimal des capacités selon l’écart entre les coûts d’installation et le type de tourisme ; et ensuite le rapport d’équilibre des profits selon les sens des surcapacités relatives et le types de tourisme.
https://hal.univ-antilles.fr/hal-01265818

Droits : info:eu-repo/semantics/OpenAccess
hal-01265818
https://hal.univ-antilles.fr/hal-01265818
https://hal.univ-antilles.fr/hal-01265818/document
https://hal.univ-antilles.fr/hal-01265818/file/TRANP-TOUR.pdf