Éditeur(s) : Amer Geophysical Union
Résumé : The Algerian margin has originated from the opening of the Algerian basin about 25-30 Ma ago. The central margin provides evidence for large-scale normal faults of Oligo-Miocene age, whereas transcurrent tectonics characterizes the western margin. A set of NW-SE oriented dextral transform faults was active during basin opening and divided the 600 km long central margin into segments of similar to 120-150 km. The upper Miocene, Plio-Quaternary, and present-day tectonic setting is, however, compressional and supports the occurrence of a margin inversion, a process still poorly documented worldwide. We show that the central Algerian margin represents a rare example of inverted margin, where the process of subduction inception is particularly well expressed and helps understand how extensional and transtensive structures are involved in margin shortening. Using multibeam bathymetry and multichannel seismic reflection sections from the MAR-ADJA 2003 and 2005 cruises, we evidence Pliocene-Pleistocene shortening with contrasting styles along the margin between west (Khayr Al Din bank) and east (Boumerdes-Dellys margin) of Algiers. Pre-Miocene structures such as basement highs and transform faults appear to control changes of the deformation pattern along this part of the margin, resulting in different widths, geometries, and relative positions of folds and faults. Plio-Quaternary and active blind thrust faults do not reuse Oligo-Miocene normal and transform faults during inversion, but instead grow within the continental margin (as testified for instance by the 21 May 2003 M-w 6.8 Boumerdes-Zemmouri earthquake), at the foot of the continental slope and at the northern sides of basement highs interpreted as stretched continental blocks of the rifted margin. The inherited structures of the margin appear, therefore, to determine this deformation pattern and ultimately the earthquake and tsunami sizes offshore. The complex geometry of the fault system along the Algerian margin suggests a process of initiation of subduction in its central and eastern parts.
Tectonics (0278-7407) (Amer Geophysical Union), 2010-03 , Vol. 29 , N. TC2008 , P. 1-22

Droits : 2010 American Geophysical Union
http://archimer.ifremer.fr/doc/00008/11883/9286.pdf
http://archimer.ifremer.fr/doc/00008/11883/9287.pdf
DOI:10.1029/2009TC002547
http://archimer.ifremer.fr/doc/00008/11883/

Éditeur(s) : HAL CCSD
Résumé : East African Rift (EAR) is the divergent plate boundary. EAR exposes different stages of extension, from early stage rifting in Tanzania to oceanic accretion in Afar (Ethiopia). Manyara basin is the southernmost rift system of the east branch of EAR with recent volcanism (< 1.5 Ma) and a seismic swarm in the lower crust (20 – 40 km). Due to its location and tectonic setting, the Manyara basin offers the opportunity to study the earliest stage of rift initiation. Manyara volcanism is composed of several types of hyper-alkaline lavas as Mg-nephelinites (Mg# > 55) (Labait, Kwaraha), calciocarbonatite (Kwaraha) and evolved nephelinites (Mg# < 35) (Hanang).Mg-nephelinites (Labait and Kwaraha) are primary lavas mainly composed of olivine and clinopyroxene (cpx). Geochemical modelling from trace elements suggests that these primary magmas result from a degree of partial melting < 1 % from a CO2-garnet-phlogopite-bearing peridotite. These magmas have an asthenospheric source at depth > 120 km (lava carries xenoliths with equilibrium conditions > 4 GPa). The minerals were crystallized from a magma with a low H2O content (0.1 and 0.5 wt% H2O). The calciocarbonatite and evolved nephelinites are derived from Mg-nephelinites by fractional crystallization and immiscibility processes. Hanang nephelinites are silica- and alkaline-rich lavas (44.2 – 46.7 wt % SiO2, 9.5 –12.1 wt % Na2O+K2O, respectively) composed by cpx, Ti-garnet, nepheline, apatite and titanite. Complex zonation of cpx (e.g. abrupt change of Mg#, Nb/Ta, and H2O) and trace element patterns of nephelinites record magmatic differentiation involving open system with carbonate-silicate immiscibility and primary melt replenishment. The low H2O content of cpx (3 – 25 ppm wt. H2O) indicates that at least 0.3 wt % H2O was present at depth during carbonate-rich nephelinite crystallization at 340 – 640 MPa and 1050 – 1100 °C. The study of hosted-nepheline melt inclusions from Hanang allows constraining the late magmatic evolution of nephelinites during storage and magma ascent. Melt inclusions are composed by a silicate trachytic glass, a carbonate phase and a shrinkage bubble. Trachytic glass contains high content in CO2 (0.43 wt %, SIMS analyses), sulfur (0.21 – 0.92 wt % S), chlorine (0.28 –0.84 wt % Cl) and H2O low content (< 0.1 wt %, Raman analyses). Immiscibility process leading to the formation of carbonate occurs in a closed system during rapid magma ascent between 200 – 500 MPa. The carbonate phase is a Ca-Na-K-S-rich and anhydrous carbonate (33 wt % CaO, 20 wt % Na2O, 3 wt % K2O, and 3 wt % S). The pre-immiscible liquid has a phonolitic composition with 6 ± 1.5 wt % CO2 at 700 MPa. A preliminary study of melt inclusions by XANES spectroscopy and whole rocks by Mössbauer spectroscopy was used to determine these Manyara lavas were formed at oxidizing conditions (~ ΔFMQ +1.5).The early stage rifting volcanism (Manyara Basin) is characterized by CO2-rich and H2O-poor magmas from at least 120 km below the rift escarpment. The presence of CO2-rich magmas and the small amount of volcanic rocks erupted at the surface may indicate that the storage and percolation of these magmas at depth is a potential trigger for deep seismic swarms.
Le rift Est africain (REA) est une frontière de plaque en extension. Ce rift présente plusieurs stades d’extension, de l’initiation du rift en Tanzanie jusqu’à l’accrétion océanique en Afar. Le bassin de Manyara se situe le plus au sud de branche Est du REA. Il est caractérisé par la présence de volcanisme récent (< 1,5 Ma) et d’un essaim sismique dans la croûte inférieure (20 – 40 km). De par sa localisation et son contexte tectonique, le bassin de Manyara offre l’opportunité d’étudier le stade le plus précoce de l’initiation du rift. Le bassin de Manyara est composé de plusieurs types de laves hyperalcalines, les néphélinites magnésiennes (Mg# > 55) (Labait, Kwaraha), de calciocarbonatite (Kwaraha) et des néphélinites différenciées (Mg# < 35) (Hanang).Les néphélinites magnésiennes (Labait et Kwaraha) sont des laves primaires composées d’olivines et de clinopyroxènes (cpx). La modélisation géochimique des éléments en trace suggère que ces magmas primaires résultent d'un degré de fusion partielle ≤ 1 % à partir d'une péridotite à grenat et phlogopite. Ces magmas proviennent d’une profondeur > 120 km (présence de xénolites avec des conditions d’équilibre > 4 GPa). Les minéraux ont cristallisés à partir d’un magma pauvre en eau (0,1 et 0,5 pds % H2O). La calciocarbonatite et les néphélinites différenciés sont issues des néphélinites magnésiennes par cristallisation fractionnée et processus d’immiscibilité. Les néphélinites du Hanang sont riches en éléments alcalins (9,5 – 12,1 pds % Na2O+K2O) et en silice (44,2 – 46,7 pds% SiO2) et sont composés de cpx, grenat, néphéline, titanite et apatite. La zonation complexe dans les cpx (par exemple, changement brusque de Mg#, Nb/Ta, et H2O) implique une différenciation magmatique en système ouvert avec immiscibilité de liquide carbonaté et silicaté ainsi qu’un remplissage de la chambre magmatique avec des liquides primaires. La faible teneur en eau des cpx (3 – 25 ppm H2O) indique la présence d’un magma pauvre en eau (0,3 pds % H2O) lors de la cristallisation des cpx à des conditions crustales (340 – 640 MPa et 1050 – 1100 °C). L’étude des inclusions vitreuses dans les néphélines de Hanang permet de contraindre l'évolution magmatique tardive des néphélinites et le comportement des éléments volatils (CO2, H2O, S, F, Cl) lors du stockage et de la remontée du magma. Les inclusions vitreuses sont composées d’un verre trachytique, d’une phase carbonatée et d’une bulle de rétraction. Le verre trachytique contient du CO2 (0,43 pds % CO2, analyses SIMS), du soufre (0,21 à 0,92 pds% S), du chlore (0,28 – 0,84 pds % Cl) et très peu d’H2O (< 0,1 pds % H2O, analyses Raman). Le processus d’immiscibilité conduisant à la formation du carbonate se produit dans un système fermé pendant l'ascension rapide du magma, entre 200 – 500 MPa. La phase carbonatée est un carbonate anhydre et riche en Ca-Na-K-S (33 pds % CaO, 20 pds % Na2O, 3 pds % K2O, et 3 pds % S). Le liquide pré-immiscible a une composition phonolitique avec 6 ± 1,5 pds % CO2 à une pression de 700 MPa. Une étude préliminaire des inclusions par spectroscopie XANES et des roches par spectroscopie Mössbauer a permis de déterminer que les laves de Manyara se sont formées à conditions oxydantes (~ ∆FMQ +1,5).À l’initiation du rift, le volcanisme dans le bassin de Manyara est caractérisé par des magmas riches en CO2 et pauvres en H2O issus d’au moins 120 km de profondeur sous l'escarpement du rift. La présence de ces magmas riches en CO2 et la faible quantité de roches volcaniques émises à la surface peuvent indiquer que le piégeage et la percolation de ces magmas en profondeur est un déclencheur potentiel des essaims sismiques profonds.
https://tel.archives-ouvertes.fr/tel-01563231

NNT : 2016MONTT114
tel-01563231
https://tel.archives-ouvertes.fr/tel-01563231
https://tel.archives-ouvertes.fr/tel-01563231v2/document
https://tel.archives-ouvertes.fr/tel-01563231/file/2016_BAUDOUIN_archivage.pdf

Éditeur(s) : Gauthier-villars
Résumé : Seismic, Seabeam, magnetic and gravimetrie surveys in the southern part of the N-Fiji basin were conducted during the SEAPSO LEG III Cruise. The active spreading axis was recognized between 17°30'S and 21°S. It consists of a continuous N-S Ridge cross-cut by transverse directions oriented N25 and N45. North of 17°30'S, the spreading System is more complex due to the existence of a possible triple junction located around 15° S. The eastern part of the N-Fiji basin, west of Viti Levu is mostly characterized by alternating highs and deeps (<4,000 m). This area must be regarded no more as a spreading center, but as complex boundary suffering transverse tectonics.
La mission SEAPSO III a permis de localiser une zone d'accrétion active, d'orientation méridienne et pratiquement continue entre 17°30'S et 21° S. Des accidents transverses, qui encadrent ou recoupent cette dorsale, s'orientent autour de deux directions principales N25 et N45. Au Nord de 17 30'S le système d'accrétion, beaucoup plus complexe, annonce la triple jonction reconnue aux alentours de 15" S. La partie orientale du bassin Nord-Fidjien (à l'Ouest de l'île de Viti Levu) est caractérisée par l'alternance de zones hautes et de dépressions dont certaines dépassent 4000 m de profondeur. Il s'agit d'une zone complexe de déformations liées à des accidents cisaillants transverses.
Comptes Rendus de l'Academie des Sciences Serie II (1251-8069) (Gauthier-villars), 1986-06 , Vol. 303 , N. 1 , P. 93-98

Droits : Académie des Sciences
http://archimer.ifremer.fr/doc/00184/29492/27835.pdf
http://archimer.ifremer.fr/doc/00184/29492/

Éditeur(s) : Gauthier-Villars
Résumé : During Leg 66 eight sites were drilled to form a transect across the Middle America Trench off southwestern Mexico. Cores from these sites show that accretion began approximately 10 MY ago and has continued to the present. Accretion began with offscraping followed by a 2- to 4- MY episode of folding and faulting with uplift rates of 400-500 m/MY; uplift then slowed to 100-200 m/MY, and seismically resolved deformation ceased as the wedge appeared to rise evenly. Approximately 33% of the sediment flux input into the subduction zone, mainly trench sand and slump deposits, is scraped off and incorporated into the toe of the lower slope; an additional 33% is initially subducted but then peeled off to underplate the accretionary wedge; the remaining 33% is subducted landward beneath the overhanging lip of continental crust. Although we find no direct evidence of tectonic erosion, the large amount of sediment subducted makes tectonic erosion feasible.
Oceanologica Acta, Special issue (0399-1784) (Gauthier-Villars), 1981

Droits : info:eu-repo/semantics/openAccess
http://archimer.ifremer.fr/doc/00245/35668/34176.pdf
http://archimer.ifremer.fr/doc/00245/35668/

Résumé : L’arc des Petites Antilles résulte de la lente subduction vers l'Ouest des plaques Nord et Sud-Américaines sous la plaque Caraïbes (2cm/an). A la latitude de l’archipel guadeloupéen et à ~150 km à l’Ouest du front de déformation, le bassin d'avant-arc de Marie-Galante forme un bassin perché, incliné vers la fosse et limité vers l’Est par un haut-fond, l’Eperon Karukéra. À cette latitude, le bassin de Marie-Galante domine le prisme d’accrétion de la Barbade et fait face à la ride de Tiburon qui balaye la zone du Nord au Sud depuis la fin du Miocène supérieur. Le remplissage sédimentaire du Bassin de Marie-Galante montre des déformations actives au moins depuis ~30 millions d’années. L’objectif du travail est de reconstituer l’évolution tectono-sédimentaire de ce bassin pour apporter de nouvelles contraintes sur la compréhension globale de la zone de subduction frontale des Petites Antilles. Ce travail s'appuie sur les données de bathymétrie multifaisceaux et de sismique réflexion multi-traces haute résolution acquises lors des campagnes du programme KaShallow. Cette base de données, complétée de profils sismiques plus basse résolution de campagnes antérieures, permet d’avoir une couverture pseudo 3D et à quatre échelles de résolution de l'ensemble du bassin. Un échantillonnage par ROV et carottage ciblé a fourni 40 prélèvements dans les principales unités sismiques. Les analyses pétrologiques et les datations biostratigraphiques autorisent des reconstitutions paléo-environnementales depuis le Paléogène supérieur jusqu’à Actuel. L’interprétation sismique multi-échelle montre un bassin sédimentaire atteignant ~4,5s temps double (~4500 à 5625 m) sur un substratum magmatique pré-structuré. Ce bassin est composé de 5 grands ensembles sédimentaires (E-1, E1, E2, E3 et E4) subdivisés en 13 unités limitées par 14 surfaces de discontinuités. L’organisation séquentielle des unités sismiques permet de mettre en évidence 10 séquences de dépôts de troisièmes ordres (S-1 à S9). Le calage biostratigraphique de l’ensemble des séquences permet de proposer une évolution tectono-sédimentaire du bassin de l’Éocène à l’Actuel. Ainsi, nous distinguons quatre systèmes de failles normales associées à trois phases d’extensions qui contrôlent l’évolution architecturale et sédimentaire du bassin. 1/ Un système N050±10°E hérité, actif dès le Paléogène supérieur, qui contrôle le basculement général du bassin vers le SSE. Il est responsable de la formation de l'escarpement de Désirade d’environ 4500 m de dénivelé. Cette première extension est interprétée comme résultant de la fragmentation de l'avant-arc en réponse à l'augmentation du rayon de courbure de la zone de subduction. 2/ Un système N130°-N150°E, structurant à l’échelle de l’Éperon Karukéra, qui contrôle la sédimentation dès le Miocène inférieur et marque une première phase d'extension transverse à l’arc. 3/ Un système N160°-N180°E qui segmente le Bassin de Marie-Galante en un sous-bassin à l'Ouest et l'Éperon Karukéra à l'Est. Cette seconde extension, globalement perpendiculaire à la marge, s'accompagne d’une subsidence et d'une inversion de la polarité du bassin en réponse à son basculement vers la fosse qui débute au cours du Miocène moyen et se poursuit actuellement à l'Est du bassin. Cette évolution à long terme de l'avant-arc, concomitante avec le recul de l'arc volcanique vers l’Ouest, est considérée comme résultant d’une érosion basale de la plaque supérieure. 4/ Un système N090±10°E plus tardif est localisé au centre du bassin et qui contrôle le développement de plates-formes carbonatées néritiques sur certaines têtes de blocs, comme par exemple à Marie-Galante. Cette dernière extension, parallèle à l’arc, se manifeste dans le bassin à partir du Pliocène inférieur. Elle se superpose au régime d'extension perpendiculaire à l'avant-arc et est interprétée comme l'accommodation du partitionnement de la déformation en réponse à l’obliquité croissante du front subduction vers le Nord.
The Lesser Antilles result of the slow westward subduction of the North and South American plate under the Caribbean plate (2 cm / year). At the latitude of the Guadeloupe archipelago and ~ 150 km to the west of the deformation front, the fore-arc basin of Marie-Galante forms a perched basin tilted to the pit and limited to the East by a shoal, the Spur Karukéra. At this latitude, Marie-Galante basin dominates the accretionary prism of Barbados and faces wrinkle Tiburon sweeping the area from North to South from the late Miocene. The sedimentary fill Basin Marie-Galante shows active deformation since at least ~ 30 million years. The aim of the work is to reconstruct the tectono-sedimentary evolution of the basin to provide new constraints on the overall understanding of the frontal subduction zone Lesser Antilles. This work relies on multibeam bathymetry data and high-resolution seismic reflection multi-traces acquired during campaigns KaShallow program. This database, supplemented by lower resolution of previous campaigns seismic profiles, provides a pseudo-3D coverage and four scales of resolution of the entire basin. ROV sampling and targeted core provided 40 samples in the main seismic units. Petrological analysis and biostratigraphic dating allow paleoenvironmental reconstructions from the upper Paleogene up Actuel. Seismic interpretation multiscale shows a sedimentary basin reaching ~ 4,5s double (~ 4500-5625 m) on a substrate pre-structured magma. This basin consists of 5 main sedimentary units (E-1, E1, E2, E3 and E4) divided into 13 units bounded by discontinuities 14 surfaces. The sequential organization of seismic units allows to highlight sequences 10 deposits of third order (S-1 to S9). The biostratigraphic calibration of all sequences able to offer a tectono-sedimentary evolution of the Eocene basin to Present. Thus, we distinguish four normal fault systems associated with three phases of extensions that control the architectural and sedimentary evolution of the basin. 1 / A system N050 ± 10 ° E inherited assets from the upper Paleogene, which controls the overall pelvic tilt towards the SSE. He is responsible for the formation of the escarpment Désirade about 4500 m elevation. The first extension is interpreted as resulting from the fragmentation of the fore-arc in response to the increase in the radius of curvature of subduction. 2 / A system N130 ° -N150 ° E, structuring across the Spur Karukéra, which controls sediment from the Miocene and marks the first phase of transverse extension arc. 3 / A system N160 ° E ° -N180 which segments Basin Marie-Galante in a sub-basin to the west and the Spur Karukéra in the East. This second extension, generally perpendicular to the margin, is accompanied by subsidence and reversing the polarity of the basin in response to his switch to the pit, beginning during the Middle Miocene and is ongoing in the East the basin. This long-term evolution of the forearc, concurrent with the decline in volcanic arc to the west, is considered as resulting from a basal erosion of the top plate. 4 / A system N090 ± 10 ° later E is located in the center of the basin and controlling the development of neritic carbonate platforms on certain blocks heads, such as Marie-Galante. This latest extension, parallel to the arc occurs in the basin from the lower Pliocene. It is superimposed on the expansion plan perpendicular to the fore-arc and is interpreted as the accommodation of the partitioning of deformation in response to the increasing obliquity front subduction north.

http://www.theses.fr/2014AGUY0799/document

Éditeur(s) : HAL CCSD Seismological Society of America
Résumé : International audience
Abstract The continuous record of large surface-rupturing earthquakes along the Dead Sea fault brings unprecedented insights for paleoseismic and archaeoseismic research. In most recent studies, paleoseismic trenching documents the late Holocene faulting activity, while tectonic geomorphology addresses the long-term behavior (>10 ka), with a tendency to smooth the effect of individual earthquake rupture events (Mw >7). Here, we combine historical, archaeological, and paleoseismic investigations to build a consolidated catalog of destructive surface-rupturing earthquakes for the last 14 ka along the left-lateral Jordan Valley fault segment. The 120- km-long fault segment limited to the north and the south by major pull-apart basins (the Hula and the Dead Sea, respectively) is mapped in detail and shows five subsegments with narrow stepovers (width < 3 km). We conducted quantitative geomorphology along the fault, measured more than 20 offset drainages, excavated four trenches at two sites, and investigated archaeological sites with seismic damage in the Jordan Valley. Our results in paleoseismic trenching with 28 radiocarbon datings and the archaeoseismology at Tell Saydiyeh, supplemented with a rich historical seismic record, document 12 surface-rupturing events along the fault segment with a mean interval of ∼1160 yr and an average 5 mm=yr slip rate for the last 25 ka. The most complete part of the catalog indicates recurrence intervals that vary from 280 yr to 1500 yr, with a median value of 790 yr, and suggests an episodic behavior for the Jordan Valley fault. Our study allows a better constraint of the seismic cycle and related short-term variations (late Holocene) versus long-term behavior (Holocene and late Pleistocene) of a major continental transform fault.
ISSN: 0037-1106

hal-00747401
https://hal.archives-ouvertes.fr/hal-00747401
DOI : 10.1785/0120100097

Éditeur(s) : HAL CCSD
Résumé : The aim of this thesis is to analyze the variations in slip rates along strike-slip faults, in intracontinental domain, producing large earthquakes (M > 7.5). To illustrate these variations, this work has focused in two area located in the most tectonically active continental domains in the world: in the western part of Mongolia (Bogd and Bulnay faults) and in the northern part of Iran (Astaneh and Tabriz faults). Using morphotectonic and paleoseismological analyses, the kinematics, the slip rates and the recurrence times have been estimated and allow us to describe the characteristics of seismic cycle along these faults. In Mongolia, the slip rates are estimated at ~ 1,2 and ~ 2,6 mm/yr along the Bogd and the Bulnay faults, respectively, with no variations of geological slip rates over the late Pleistocene-Holocene period. These two faults present characteristic slips and similar recurrence times between large earthquakes. The paleoseismological investigations suggest that a cluster occurred 3000 years ago, similar to the seismic cluster recorded in Mongolia during the XX century. In Iran, the slip rate was estimated to 2 mm/yr along the Astaneh fault and the recurrence times are ranging from 1600 to 2200 years, associated with offsets comprised between 3 and 4,5 m. We have also estimated a slip rate of ~ 7 mm/yr along the Tabriz fault, in agreement with the present day rate estimated by GPS, suggesting no variations in the slip rate over the past 45 ka.
Ce travail de thèse a pour but d'analyser les variations de vitesses sur des grandes failles décrochantes en contexte intracontinental, capables de produire des séismes de très fortes magnitudes (M > 7.5). Afin d'illustrer ces variations d'activités, cette analyse a été effectuée sur deux zones d'études situées en domaine continental et sismiquement actives: la région ouest de la Mongolie (failles de Bogd et Bolnay) et le nord de l'Iran (failles d'Astaneh et de Tabriz). À partir d'une approche morphotectonique et paléosismologique, les cinématiques, les vitesses de failles et les intervalles de récurrence entre les séismes majeurs ont été estimés, permettant d'analyser les caractéristiques du cycle sismique sur chacune des failles. En Mongolie, les failles de Bogd et Bolnay présentent respectivement des vitesses de ~ 1,2 et 2,6 mm/an, qui semblent être constantes sur la période Pleistocène supérieur-Holocène. Ces deux failles présentent également des glissements caractéristiques et des intervalles de temps similaires entre les séismes majeurs. Les analyses paléosismologiques suggèrent qu'un essaim sismique comparable à celui enregistré au XXème siècle a eu lieu il y a environ 3000 ans. En Iran, une vitesse géologique de 2 mm/an a été estimée sur la faille d'Astaneh et les données paléosismologiques suggèrent des intervalles de récurrence de 1800 ans, associés à des déplacements en surface compris entre 3 et 4,5 m. Nous avons également estimé une vitesse de 7 mm/an sur la faille de Tabriz, en accord avec les données GPS, suggérant que la vitesse sur cette faille est constante depuis 45 ka.
https://tel.archives-ouvertes.fr/tel-00591794

tel-00591794
https://tel.archives-ouvertes.fr/tel-00591794
https://tel.archives-ouvertes.fr/tel-00591794/document
https://tel.archives-ouvertes.fr/tel-00591794/file/these_rizza.pdf

Éditeur(s) : Gauthier-Villars
Résumé : The Middle America Trench off Guatemala was transected by 24-channel seismic-reflection surveys, seismic-refraction surveys, and drilling with the Glomar Challanger . The drilling was doneat three sites on the oceanic Cocos plate and four sites on the Caribbean plate. These plates converge at about 10 cm/yr as indicated by global plate reconstruction. On the oceanic Cocos plate a basal chalk sequence of lower and middle Miocene age is overlain by a thin interval of abyssal clay. In contrast is the Cretaceous to lower Miocene claystone sequence recovered only at a site 3 km landward of the trench axis where drilling penetrated the hemipelagic slope deposits. A large amount of sediment along with ocean crust has been subducted during the present (Miocene to Quaternary) episode of subduction, and parts of the continental framework may have been subducted as well. No current tectonic model satisfactorily explains the surprising occurrence of Cretaceous to Miocene claystone at the foot of the continent.
Oceanologica Acta, Special issue (0399-1784) (Gauthier-Villars), 1981

Droits : info:eu-repo/semantics/openAccess
http://archimer.ifremer.fr/doc/00245/35671/34179.pdf
http://archimer.ifremer.fr/doc/00245/35671/

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
To quantify the relationships between anisotropy. S-wave splitting and tectonics, we determined the seismic properties of lower-crustal and upper-mantle rocks outcropping in the lvrea Zone (Northem Italy). We obtained P-and S-wave seismic velocities by laboratory direct velocity measurements and/or by calculations based on the modal compositions of the rocks, the lattice preferred orientations (LPOs), and the single crystal stiffness coefficients. Measured P-and S-wave velocities (6.0-7 .5 km s-1 and 3.6-4.2 km s-1) are typical of the lower crust. The P-wave anisotropy is in the range 0-l 0%. Shear-wave birefringence is in the range 0.0-0.6 km s-1 , with typical values between 0.0 and 0.2 km s-1 • In many cases, the birefringence is clearly related to fabric elements (foliation, lineation). Mafic rocks such as anorthosite or pyroxene-bearing gabbros exhibit low P-wave anisotropies (< 5%) and low shear-wave birefringences (less than 0.1 km s-1). In contrast, the seismic properties of felsic rocks such as biotite-bearing gneisses and mafic rocks such as amphibolites display high V P anisotropy (10%) and strong birefringence (0.3 km s-1). Biotite and amphibole preferred orientations clearly control seismic anisotropy and particularly shear-wave splitting. In these rocks, maximum splitting is observed in directions parallel to the foliation with the fast split shear wave polarized parallel to the foliation plane. To have an overview of the seismic properties of this lower-crustal section at a broader scale, we calculated from our data the anisotropie seismic properties of several hypothetical samples that are perhaps more representative of the regional anisotropy than each sample individually. For instance, the average lower-crustal sample displays an anisotropy of 5.5% for P waves and a birefringence around 0.14 km s I for S waves propagating parallel to the foliation. We observe little splitting for waves propagating at high angle to the foliation.
ISSN: 0031-9201

hal-01389712
http://hal.univ-reunion.fr/hal-01389712
http://hal.univ-reunion.fr/hal-01389712/document
http://hal.univ-reunion.fr/hal-01389712/file/Barruol_Kern-PEPI96_hal.pdf
DOI : 10.1016/0031-9201(95)03124-3

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Gulf of Cadiz spans the plate boundary between Africa and Eurasia west of the Betic–Rif mountain belt. A narrow east dipping subduction zone descends beneath the Gulf of Cadiz and the straits of Gibraltar. The deep crustal structure of the Gulf and the adjacent SW Iberian and Moroccan margins is constrained by numerous multi-channel seismic reflection and wide-angle seismic surveys. A compilation of these existing studies is presented in the form of depth to basement, sediment thickness, depth to Moho and crustal thickness maps. These structural maps image an E–W trending trough, with thin (< 10 km) crust beneath the Gulf of Cadiz. This trough is filled by an eastward thickening wedge of sediments, reaching a thickness of 10–15 km in the eastern Gulf. These sediments are tectonically deformed, primarily along a series of westward-vergent thrust faults and represent a 200–250 km wide accretionary wedge. The northern and especially the southern limits of the accretionary wedge are marked by sharp morphological lineaments showing evidence of recent deformation. These tectonic limits are situated in an internal position with respect to the Miocene deformation front (external Betic and Rif allocthons), which has been abandoned. At the western boundary of the accretionary wedge, near the adjacent Seine and Horseshoe abyssal plains, an E–W trending basement high (Coral Patch Ridge) can be seen indenting the deformation front in an asymmetric manner. Analog modeling is performed using granular materials accreted against a semicircular backstop (representing the basement of the Rif and Betic mountain belts). The modeling initially produces a symmetric, arcuate accretionary wedge. The ensuing collision of an oblique rigid indenter retards accretion on one side, resulting in an embayment and a locally steeper deformation front. The deformation pattern observed in morphology and high-resolution seismic profiles suggests the accretionary wedge and underlying subduction system is still active. The implications of active subduction for the source region of the 1755 Lisbon earthquake and the regional seismic hazard assessment are discussed.
ISSN: 0040-1951

hal-00424922
http://hal.univ-brest.fr/hal-00424922
http://hal.univ-brest.fr/hal-00424922/document
http://hal.univ-brest.fr/hal-00424922/file/Gutscher_09Tphys_rev.pdf
DOI : 10.1016/j.tecto.2008.11.031

Éditeur(s) : American Geophysical Union
Résumé : We use seismic reflection and rock sample data to propose that the first-order physiography of New Caledonia Trough and Norfolk Ridge formed in Eocene and Oligocene time and was associated with the onset of subduction and back-arc spreading at the Australia-Pacific plate boundary. Our tectonic model involves an initial Cretaceous rift that is strongly modified by Cenozoic subduction initiation. Hence, we are able to explain (1) complex sedimentary basins of inferred Mesozoic age; (2) a prominent unconformity and onlap surface of middle Eocene to early Miocene age at the base of flat-lying sediments beneath the axis of New Caledonia Trough; (3) gently dipping, variable thickness, and locally deformed Late Cretaceous strata along the margins of the trough; (4) platform morphology and unconformities on either side of the trough that indicate a phase of late Eocene to early Miocene uplift to near sea level, followed by rapid Oligocene and Miocene subsidence of similar to 1100-1800 m; and (5) seismic reflection facies tied to boreholes that suggest absolute tectonic subsidence at the southern end of New Caledonia Trough by 1800-2200 m since Eocene time. The Cenozoic part of the model involves delamination and subduction initiation followed by rapid foundering and rollback of the slab. This created a deep (>2 km) enclosed oceanic trough, similar to 2000 km long and 200-300 km across, in Eocene and Oligocene time as the lower crust detached, with simultaneous uplift and local land development along basin flanks. Disruption of Late Cretaceous and Paleogene strata was minimal during this Cenozoic phase and involved only subtle tilting and local reverse faulting or folding. Basin formation was possible through the action of at least one detachment fault that allowed the lower crust to either be subducted into the mantle or exhumed eastward into Norfolk Basin. We suggest that delamination of the lithosphere, with possible mixing of the lower crust back into the mantle, is more widespread than previously thought and may be commonly associated with subduction initiation, such as Cenozoic events in the Mediterranean and western Pacific.
Tectonics (0278-7407) (American Geophysical Union), 2010-03 , Vol. 29 , N. TC2004 , P. 1-16

Droits : Copyright 2010 by the American Geophysical Union.
http://archimer.ifremer.fr/doc/00001/11271/9283.pdf
DOI:10.1029/2009TC002476
http://archimer.ifremer.fr/doc/00001/11271/

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Tyrrhenian Sea is usually interpreted to be a Neogene back-arc basin that opened by continental rifting and oceanic spreading caused by the eastward migration of the Apennine subduction system during Miocene and Pliocene times. Rifting of the southern Tyrrhenian Sea started first along the Eastern Sardinian margin during the middle to late Miocene times, including the Messinian. The "METYSS" project aims at better constraining the relationships between crustal tectonics, salt tectonics and sedimentation from Messinian times to present-day. The "METYSS 1" cruise (2009) allowed to acquire about 1200 km of HR seismic-reflection profiles along the Eastern Sardinian margin, Western Tyrrhenian Sea. This data set clearly illustrates that this area has been highly dissected during the rifting stage by N-S trending normal faults delineating ridges and basins, as previously described. The Messinian seismic markers (UU and MU) locally display fan-shaped stratal geometries, but the mechanism responsible for such geometries, salt tectonics or rifting, has yet to be carefully deciphered. We also mapped the spatial distribution of the mobile salt. The highly variable thickness of the small confined salt basins may be related to the initial pre-Messinian basin geometry, to the fact that salt deposition was syn-rift or to salt movement. Southeastward, salt tectonics is vigorous in unconfined basins and appears to have started early during the UU deposition. More surprisingly, our data demonstrate that some of the major faults have been significantly reactivated during the post-rift period, up to late Quaternary time, as shown by bathymetric scarps and associated debris flows. Moreover, some of this post-rift deformation can be evidenced within the Plio-Quaternary sequence by a regional unconformity. The post-Miocene deformation style varies greatly between different areas of the margin, and can also be strongly influenced by the presence or absence of mobile Messinian salt.
ISSN: 0040-1951

hal-00996665
https://hal.archives-ouvertes.fr/hal-00996665
DOI : 10.1016/j.tecto.2013.12.015

Éditeur(s) : HAL CCSD Universidad Complutense de Madrid
Résumé : Based on new seismological and recent faulting data, we analyze five main sectors in the western part of the Betic Cordillera from an active tectonic perspective: i. The northwestern frontal sector of the cordillera, including the Morón de la Frontera area, with shallow (< 15 km depth) seismogenic active NE-SW reverse and strike-slip faults that do not reach the surface. ii. The Teba area, in the External Zones, which is deformed by sparse N-S to NW-SE normal faults with associated wedges of Quaternary sediments and active strike-slip faults at intermediate crustal levels. iii. The Ronda Basin, representing the major Late Miocene intramontane basin of the western Betic Cordillera, is mainly deformed by NNE-SSW and WNW-ESE folds and locally by NW-SE normal faults. iv. The internal part of the orogen, which is characterized by shallow (<40 km) and intermediate (40 to 120 km depth) seismicity beneath Málaga and the Alborán Sea, ENE-WSW folding, relief uplift, river incision and scarce active faults with surface expression. v. The Spanish Atlantic coast, which coincides with the western end of the Betic orogen, where Pliocene to Quaternary shallowmarine sedimentary rocks are deformed by meso-scale NW-SE oriented normal faults and few ENE-WSW reverse faults. These data support the recent tectonic activity of the western Betic Cordillera determined by the NW-SE Eurasian-African convergence with variable features from the mountain front, characterized by shallow deformations, up to the Internal Zones that mainly undergo uplift and intermediate seismicity.
ISSN: 1698-6180

hal-00750359
https://hal.archives-ouvertes.fr/hal-00750359
DOI : 10.5209/rev_JIGE.2012.v38.n1.39211

Éditeur(s) : John Wiley & Sons
Résumé : Based on all available seismic refraction data, the seismic structure of the Western Approaches to the English Channel and the South Armorican continental shelf has been established. The correlation of seismic velocities showed a three-fold structure, related to geological layers as follows: 1. High-velocity, deep sequence (4.4-6.6km/sec): metamorphic basement and Lower to Middle Palaeozoic. 2. Intermediate sequence (3.6-4.3km/sec): Permo-Triassic (and Jurassic?) and possibly also Lower Cretaceous on the margin of the Western Approaches. 3. Upper sequence (1.9-3.6km/sec): Cretaceous and Cenozoic sediments. An acoustic unconformity appears to be present between the Upper sequence and the High velocity and Intermediate sequences. Different geomorphology characterizes these layers: the Palaeozoic is tectonized and generally follows the Hercynian structural trends; mainly Permo-Triassic sediments fill the depressions of the Palaeozoic floor, but only in the Western Approaches; eastwards-transgressive Cretaceous and Cenozoic sediments cover discordantly the preceding layers. [NOT CONTROLLED OCR]
Petroleum and the continental shelf of North-west Europe (John Wiley & Sons), 1975 , P. 29-43

Droits : John Wiley & Sons
http://archimer.ifremer.fr/doc/1975/publication-5465.pdf
http://archimer.ifremer.fr/doc/00000/5465/

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We use a strike-slip fault analog model to study experimentally the role played by along-fault non-uniform and asymmetric applied normal stress on both coseismic slip and long-term fault behavior. Our model is based on a visco-elasto-plastic multi-layered rheology that allows to produce several hundreds of scaled analog microquakes and associated seismic cycles. Uniform or heterogeneous applied normal stress along the fault plane is imposed and maintained constant during the whole experiment durations. Our results suggest that coseismic slip patterns are strongly controlled by spatial normal stress variations and subsequent accumulated shear stress along fault strike. Major microquakes occur preferentially in zones of major shear stress asperities. Coseismic slip distributions exhibit a pattern similar to the along-fault applied normal stress distribution. The occurrence of isolated low to moderate microquakes where residual stresses persist around secondary stress asperities, indicates that stress conditions along the fault also control the whole variability of fault slip events. Moreover, when fault slip stability conditions are modulated by normal stress distribution, our experiments suggest that the along-fault stress heterogeneity influences the seismic cycle regularity and, consequently, long-term fault slip behavior. Uniform applied normal stress favors irregular seismic cycles and the occurrence of earthquakes clustering, whereas non-uniform normal stress with a single high amplitude stress asperity generates strong characteristic microquake events with stable return periods. Together our results strengthen the assumption that coseismic slip distribution and earthquake variability along an active fault may provide relevant information on long term tectonic stress and could thus improve seismic hazard assessment.
ISSN: 0012-821X

hal-01666379
https://hal.archives-ouvertes.fr/hal-01666379
DOI : 10.1016/j.epsl.2017.10.009

Éditeur(s) : HAL CCSD Nature Publishing Group
Résumé : International audience
Assessing seismic hazards remains one of the most challenging scientific issues in Earthsciences. Deep tectonic processes are classically considered as the only persistentmechanism driving the stress loading of active faults over a seismic cycle. Here we show via amechanical model that erosion also significantly influences the stress loading of thrust faultsat the timescale of a seismic cycle. Indeed, erosion rates of about B0.1–20mmyr1, asdocumented in Taiwan and in other active compressional orogens, can raise the Coulombstress by B0.1–10 bar on the nearby thrust faults over the inter-seismic phase. Masstransfers induced by surface processes in general, during continuous or short-lived andintense events, represent a prominent mechanism for inter-seismic stress loading offaults near the surface. Such stresses are probably sufficient to trigger shallow seismicity orpromote the rupture of deep continental earthquakes up to the surface.
ISSN: 2041-1723

insu-01087103
https://hal-insu.archives-ouvertes.fr/insu-01087103
https://hal-insu.archives-ouvertes.fr/insu-01087103/document
https://hal-insu.archives-ouvertes.fr/insu-01087103/file/Steer2014_NatureComm_accepted.pdf
DOI : 10.1038/ncomms6564

Éditeur(s) : HAL CCSD Springer Verlag (Germany)
Résumé : International audience
Surface displacements due to temporal changes in environmental mass redistributions are observable in the coordinate time series of many Global Navigation Satellite System (GNSS) sites. In this study, we investigated the effect of loading on estimates of tectonic velocity computed from campaign-style GNSS observations. The study region is in the Pyrenees mountain range between France and Spain (ResPyr campaigns). In this area, seismic activity is continuous and moderate and the expected amplitude of the horizontal tectonic velocity is less than 0.5 mm/yr. In order to determine the velocity, 4 sparse GNSS campaigns were carried out from 1995 to 2010. Considering this small rate of deformation, loading phenomena can contribute a non-negligible artifact to the velocity computation that could affect our geodynamical interpretation. In this investigation, we specifically considered the atmospheric, hydrological, and non-tidal ocean loading phenomena. The computed loading deformations for this region show the horizontal displacements are dominated by the non-tidal ocean loading (maximum 4 mm for the North and 3.1 mm for the East components); the main vertical contributions are due to the atmospheric and continental water storage loading (maximum 14.3 for the atmosphere and 8.1 mm for the hydrology, respectively). We have found that the dominant loading effect on the horizontal velocity is the non-tidal ocean loading (mean of 0.11 mm/yr), whereas the vertical component is dominated by the hydrological loading (mean of 0.21 mm/yr). Since the study area is in a mountainous region, we also analyzed the difference between the atmospheric and the topography dependent atmospheric loading models at our GNSS campaign sites. We did not find any significant difference between the two atmospheric loading models in terms of horizontal velocity. Finally, we performed simulations to identify the optimum timing and frequency of future GNSS campaigns in this area that would minimize the loading effects on tectonic velocity estimates.
ISSN: 0039-3169

hal-00963629
https://hal.archives-ouvertes.fr/hal-00963629
DOI : 10.1007/s11200-012-0458-2

Éditeur(s) : HAL CCSD Oxford University Press (OUP): Policy P - Oxford Open Option A Oxford University Press (OUP)
Résumé : International audience
The Pyrenean mountain range is a slowly deforming belt with continuous and moderate seismic activity. To quantify its deformation field, we present the velocity field estimated from a GPS survey of the Pyrenees spanning 18 yr. The PotSis and ResPyr networks, including a total of 85 GPS sites, were installed and first measured in 1992 and 1995–1997, respectively, and remeasured in 2008 and 2010. We obtain a deformation field with velocities less than 1 mm yr−1 across the range. The estimated velocities for individual stations do not differ significantly from zero with 95 per cent confidence. Even so, we estimate a maximum extensional horizontal strain rate of 2.0 ± 1.7 nanostrain per year in a N–S direction in the western part of the range. We do not interpret the vertical displacements due to their large uncertainties. In order to compare the horizontal strain rates with the seismic activity, we analyse a set of 194 focal mechanisms using three methods: (i) the ‘r’ factor relating their P and T axes, (ii) the stress tensors obtained by fault slip inversion and (iii) the strain-rate tensors. Stress and strain-rate tensors are estimated for: (i) the whole data set, (ii) the eastern and western parts of the range separately, and (iii) eight zones, which are defined based on the seismicity and the tectonic patterns of the Pyrenees. Each of these analyses reveals a lateral variation of the deformation style from compression and extension in the east to extension and strike-slip in the west of the range. Although the horizontal components of the strain-rate tensors estimated from the seismic data are slightly smaller in magnitude than those computed from the GPS velocity field, they are consistent within the 2σ uncertainties. Furthermore, the orientations of their principal axes agree with the mapped active faults.
ISSN: 0956-540X

hal-01171752
https://hal.archives-ouvertes.fr/hal-01171752
DOI : 10.1093/gji/ggv052

Éditeur(s) : HAL CCSD
Résumé : The purpose of this work is to specify the deformation offshore East of Taiwan by characterizing major active faults in particular at the level of the Ryukyu forearc. The major problem associated with the study of this region is that earthquakes are located outside the permanent networks. Consequently, this led to some unprecise earthquake locations limiting tectonic and statistical analyses, and therefore the correct estimation of the seismic hazard. This work is included in the project ANR ACTS (Active Tectonics and Seismic Hazard in Taiwan). To achieve this goal, we worked on three different timescales for which a different localization method has been proposed to obtain a clear image of seismic deformation and highlight major faults offhore East of Taiwan. First, at the scale of the century (from the analysis of a seismicity catalogue with homogeneous magnitude), the instrumental historical earthquakes (1897-2007) show that the Ryukyu margin was affected by 6 earthquakes of magnitude greater than 7 with 4 of them for which the responsible fault is unknown. We propose a method of relative location to relocate the historic events from the time difference of P and S arrival times (Ts-Tp) at each station. The location is obtained by searching for "analogue" earthquakes in the recent instrumental catalogue (1991-2008) for which Ts-Tp at each station is close. This method has been applied to the largest (in terms of magnitude) earthquake ever recorded in Taiwan, the earthquake of June 5, 1920 (M7.7 +/- 0.2). A rupture along the interplate of the Ryukyu subduction with a possible nucleation at the downdip limit of a splay-fault is certainly responsible of this earthquake. Then, at the scale of the decade, the improvement of the method of absolute location based on MAXimum of Intersection of EDT (MAXI, EDT: Equal Differential Time) allows to better extract the erroneous arrival times and prevents the "trade-off" between depth and origin time, and between depth and epicentral position when the azimuthal coverage is low (gap Azimuthal > 180degre). Synthetic tests show the effectiveness of MAXI (using P-wave only) to determine the parameters x, y and z even when the azimuthal gap is important. In the latter case, the quality of the results is dependent on the velocity model to represent the 3D structure of the Earth. We propose an approach involving the use of a 3D a priori P-wave velocity model to locate earthquakes which are lateral and remote to the seismic network. An application to the case of Taiwan and Ecuador validates this approach. Finally, at the level of a few months, the marine geophysical campaign RATS (Ryukyu Arc: Tectonics and Seismology) was conducted in two stages. A passive seismology experiment from July to October, 2008 (RATS1) has been conducted over the forearc of the Ryukyus and then active seismic experiment (refraction and reflection) was conducted in May 2009 in a NNE - SSW line through the Ryukyu margin. These two combined experiments allow improving our knowledge about the crustal structure of the margin. At the level of the forearc, the basement of the forearc is characterized by vertical backstop and a very deformed basis certainly associated with a significant out of sequence deformation. In depth, the downgoing plate is certainly affected by a tear that controls the seismicity in the region of transition between the subduction and collision.
Le but de ce travail est de préciser la déformation en mer à l'est de Taïwan et de notamment caractériser les failles actives majeures en particulier au niveau de l'avant-arc des Ryukyus. Le problème majeur associé à l'étude de cette région est que les séismes sont localisés en dehors des réseaux permanents et que cela conduit à des localisations peu précises limitant les analyses statistiques, tectoniques et donc l'estimation correcte de l'aléa sismique. Ce travail est inclus dans le projet ANR ACTS (Active Tectonics and Seismic Hazard in Taiwan). Pour atteindre cet objectif, nous travaillons à trois échelles de temps différentes pour lesquelles une méthode de localisation différente a été proposée pour obtenir une image précise de la déformation sismique et mettre en évidence les failles majeures en mer à l'est de Taïwan. D'abord, à l'échelle du siècle (à partir de l'analyse d'un catalogue de sismicité homogène en magnitude), les séismes historiques instrumentaux (1897-2007) montrent que la marge des Ryukyus a été affectée par 6 séismes de magnitude supérieure à 7 dont 4 pour lesquels la faille responsable n'est pas connue. Nous proposons une méthode de localisation relative qui permet de relocaliser les évènements historiques à partir des différences de temps d'arrivées P et S (Ts-Tp) à chaque station. La localisation est obtenue en recherchant les séismes analogues dans le catalogue instrumental récent (1991-2008) pour lesquels Ts-Tp à chaque station est proche. Cette méthode a été appliquée au plus gros séisme (en terme de magnitude) jamais enregistré à Taïwan, le séisme du 5 juin 1920 (M7.7 $pm$ 0.2). Ce séisme a certainement pour origine une rupture sur l'interplaque sismogène de la subduction des Ryukyus avec une possible nucléation à la base d'une faille hors-séquence. Ensuite, à l'échelle de la dizaine d'années, l'amélioration de la méthode de localisation absolue du MAXimum d'Intersection EDT (MAXI, EDT: Equal Differential Time) permet de mieux extraire les temps d'arrivées erronés et empêche les "trade-off" entre profondeur et temps d'origine et, entre profondeur et position épicentrale lorsque la couverture azimutale est faible (gap azimutal > 180°). Des tests synthétiques montrent l'efficacité de MAXI (en utilisant les ondes P uniquement) à déterminer les paramètres x, y et z même lorsque le gap azimutal est important. Dans ce dernier cas, la qualité des résultats reste dépendant du modèle de vitesse à représenter la structure 3D de la Terre. Nous proposons une démarche associant l'utilisation d'un modèle de vitesse des ondes P 3D a priori avec la méthode MAXI pour localiser les séismes qui sont latéraux et éloignés du réseau. Une application au cas de Taïwan et en Équateur valide cette approche. Enfin, à l'échelle de quelques mois, la campagne de géophysique marine RATS (Ryukyu Arc: Tectonics and Seismology) a été menée en deux temps. Une expérience de sismologie passive de juillet à octobre 2008 (RATS1) a été menée au-dessus de l'avant-arc des Ryukyus puis une expérience de sismique active (réfraction et réflexion) a été menée en mai 2009 sur une ligne NNE-SSW à travers la marge des Ryukyus. Ces deux expériences combinées permettent d'améliorer notre connaissance de la structure crustale de la marge. Au niveau de l'avant-arc, le socle de l'avant-arc est caractérisé par une extrémité formant un butoir vertical et une base très déformée certainement associée à une importante déformation hors-séquence. En profondeur, la plaque plongeante est certainement affectée par une déchirure qui contrôle la sismicité dans cette région de transition entre la subduction et la collision.
https://tel.archives-ouvertes.fr/tel-00660737

tel-00660737
https://tel.archives-ouvertes.fr/tel-00660737
https://tel.archives-ouvertes.fr/tel-00660737/document
https://tel.archives-ouvertes.fr/tel-00660737/file/Thesis_small.pdf

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The southernmost part of the Ryukyu subduction, where the Philippine Sea Plate is subducting under the Eurasian Plate, is known to be a very seismically active region of transition from a north-dipping subduction along the Ryukyu subduction to an ~ SE-NW collision along the Taiwanese orogenic wedge. In this paper, we will focus on the Ryukyu forearc area close to Taiwan where the deformation is paroxysmal. In order to decipher the nature of the seismic deformation in this region, a three month passive experiment, combining 22 Ocean Bottom Seismometers and 51 onland stations, has been led. Starting from an a-priori heterogeneous model, we have obtained 801 well-located earthquake hypocenters, a precise P-wave tomography model and 14 focal mechanisms. The seismicity along the Ryukyu forearc is mainly located not only in the vicinity of the Interplate Seismogenic Zone (ISZ) but also within both the subducting PSP and the overriding plate. Seismicity within the upper-plate is essentially localized east of Nanao basin where NW-SE extension occurs, and northwest of the Hoping basin where strike-slip dominates. As revealed by both the P-wave velocity structure and the newly derived seismicity, we argue that a sub-vertical step offsetting the subducting PSP around 10 km may support the presence of a trench-parallel tear. The PSP also undergoes extension in its upper part that is probably caused by buckling and slab pull. The P-wave velocity structure reveals three other major features: (1) a continuity between the Central Range and the Ryukyu Arc with a shallower Moho (~ 30 km depth) between ~ 122.3°N and ~ 122.5°N along the Ryukyu Arc, (2) high P-wave velocities along the eastern side of the Central Range and, (3) two bodies with similar high crustal velocities (6.5-7.0 km/s) at 12-18 km depths, embedded within the Ryukyu arc basement, just north of Hoping Basin and north of the Nanao Basin.
ISSN: 0040-1951

hal-00795521
https://hal.archives-ouvertes.fr/hal-00795521
DOI : 10.1016/j.tecto.2012.04.011