Éditeur(s) : HAL CCSD Bureau de recherches géologiques et minières
Résumé : National audience
Les tremblements de Terre sont sans doute l’un des phénomènes les plus catastrophiques associés à la dynamique de notre planète. Leur occurrence peut être associée d’une part au chargement lent et progressif des failles dû au mouvement des plaques tectoniques, mais également à la proximité d’autres séismes qui peuvent localement provoquer une déstabilisation du milieu. Les séismes sont classiquement interprétés dans le cadre de la théorie du cycle sismique (Fig. 1). La période asismique, correspondant au chargement séculaire des contraintes sur le plan des failles, est appelée période inter-sismique. Sa durée, entre 50 et 1000 ans, dépend du contexte géodynamique et notamment de la vitesse de chargement. La phase co-sismique correspond au séisme, i.e. à la phase de nucléation et de propagation de la rupture sismique. La période de temps associée est extrêmement courte et varie suivant les séismes entre quelques secondes à plusieurs minutes pour les méga-tremblements de terre comme celui de Sumatra en 2004 ou plus récemment celui du Japon en 2011. Enfin, suite à la rupture sismique, on considère une phase post-sismique qui correspond à un réajustement mécanique rapide du milieu qui peut s’effectuer sur plusieurs semaines, mois ou même années. La courte échelle de temps des observations sismologiques ou géodésiques (<100 ans) par rapport à la durée d’un cycle sismique (plusieurs centaines d’années) est un facteur limitant. Ainsi, aucun cycle sismique complet n’a pour l’instant pu être documenté.
ISSN: 0292-8477

insu-00913121
https://hal-insu.archives-ouvertes.fr/insu-00913121
https://hal-insu.archives-ouvertes.fr/insu-00913121/document
https://hal-insu.archives-ouvertes.fr/insu-00913121/file/geochronique_cattinetal.pdf

Éditeur(s) : HAL CCSD Seismological Society of America
Résumé : International audience
Abstract The continuous record of large surface-rupturing earthquakes along the Dead Sea fault brings unprecedented insights for paleoseismic and archaeoseismic research. In most recent studies, paleoseismic trenching documents the late Holocene faulting activity, while tectonic geomorphology addresses the long-term behavior (>10 ka), with a tendency to smooth the effect of individual earthquake rupture events (Mw >7). Here, we combine historical, archaeological, and paleoseismic investigations to build a consolidated catalog of destructive surface-rupturing earthquakes for the last 14 ka along the left-lateral Jordan Valley fault segment. The 120- km-long fault segment limited to the north and the south by major pull-apart basins (the Hula and the Dead Sea, respectively) is mapped in detail and shows five subsegments with narrow stepovers (width < 3 km). We conducted quantitative geomorphology along the fault, measured more than 20 offset drainages, excavated four trenches at two sites, and investigated archaeological sites with seismic damage in the Jordan Valley. Our results in paleoseismic trenching with 28 radiocarbon datings and the archaeoseismology at Tell Saydiyeh, supplemented with a rich historical seismic record, document 12 surface-rupturing events along the fault segment with a mean interval of ∼1160 yr and an average 5 mm=yr slip rate for the last 25 ka. The most complete part of the catalog indicates recurrence intervals that vary from 280 yr to 1500 yr, with a median value of 790 yr, and suggests an episodic behavior for the Jordan Valley fault. Our study allows a better constraint of the seismic cycle and related short-term variations (late Holocene) versus long-term behavior (Holocene and late Pleistocene) of a major continental transform fault.
ISSN: 0037-1106

hal-00747401
https://hal.archives-ouvertes.fr/hal-00747401
DOI : 10.1785/0120100097

Éditeur(s) : HAL CCSD
Résumé : The aim of this thesis is to analyze the variations in slip rates along strike-slip faults, in intracontinental domain, producing large earthquakes (M > 7.5). To illustrate these variations, this work has focused in two area located in the most tectonically active continental domains in the world: in the western part of Mongolia (Bogd and Bulnay faults) and in the northern part of Iran (Astaneh and Tabriz faults). Using morphotectonic and paleoseismological analyses, the kinematics, the slip rates and the recurrence times have been estimated and allow us to describe the characteristics of seismic cycle along these faults. In Mongolia, the slip rates are estimated at ~ 1,2 and ~ 2,6 mm/yr along the Bogd and the Bulnay faults, respectively, with no variations of geological slip rates over the late Pleistocene-Holocene period. These two faults present characteristic slips and similar recurrence times between large earthquakes. The paleoseismological investigations suggest that a cluster occurred 3000 years ago, similar to the seismic cluster recorded in Mongolia during the XX century. In Iran, the slip rate was estimated to 2 mm/yr along the Astaneh fault and the recurrence times are ranging from 1600 to 2200 years, associated with offsets comprised between 3 and 4,5 m. We have also estimated a slip rate of ~ 7 mm/yr along the Tabriz fault, in agreement with the present day rate estimated by GPS, suggesting no variations in the slip rate over the past 45 ka.
Ce travail de thèse a pour but d'analyser les variations de vitesses sur des grandes failles décrochantes en contexte intracontinental, capables de produire des séismes de très fortes magnitudes (M > 7.5). Afin d'illustrer ces variations d'activités, cette analyse a été effectuée sur deux zones d'études situées en domaine continental et sismiquement actives: la région ouest de la Mongolie (failles de Bogd et Bolnay) et le nord de l'Iran (failles d'Astaneh et de Tabriz). À partir d'une approche morphotectonique et paléosismologique, les cinématiques, les vitesses de failles et les intervalles de récurrence entre les séismes majeurs ont été estimés, permettant d'analyser les caractéristiques du cycle sismique sur chacune des failles. En Mongolie, les failles de Bogd et Bolnay présentent respectivement des vitesses de ~ 1,2 et 2,6 mm/an, qui semblent être constantes sur la période Pleistocène supérieur-Holocène. Ces deux failles présentent également des glissements caractéristiques et des intervalles de temps similaires entre les séismes majeurs. Les analyses paléosismologiques suggèrent qu'un essaim sismique comparable à celui enregistré au XXème siècle a eu lieu il y a environ 3000 ans. En Iran, une vitesse géologique de 2 mm/an a été estimée sur la faille d'Astaneh et les données paléosismologiques suggèrent des intervalles de récurrence de 1800 ans, associés à des déplacements en surface compris entre 3 et 4,5 m. Nous avons également estimé une vitesse de 7 mm/an sur la faille de Tabriz, en accord avec les données GPS, suggérant que la vitesse sur cette faille est constante depuis 45 ka.
https://tel.archives-ouvertes.fr/tel-00591794

tel-00591794
https://tel.archives-ouvertes.fr/tel-00591794
https://tel.archives-ouvertes.fr/tel-00591794/document
https://tel.archives-ouvertes.fr/tel-00591794/file/these_rizza.pdf

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We use a strike-slip fault analog model to study experimentally the role played by along-fault non-uniform and asymmetric applied normal stress on both coseismic slip and long-term fault behavior. Our model is based on a visco-elasto-plastic multi-layered rheology that allows to produce several hundreds of scaled analog microquakes and associated seismic cycles. Uniform or heterogeneous applied normal stress along the fault plane is imposed and maintained constant during the whole experiment durations. Our results suggest that coseismic slip patterns are strongly controlled by spatial normal stress variations and subsequent accumulated shear stress along fault strike. Major microquakes occur preferentially in zones of major shear stress asperities. Coseismic slip distributions exhibit a pattern similar to the along-fault applied normal stress distribution. The occurrence of isolated low to moderate microquakes where residual stresses persist around secondary stress asperities, indicates that stress conditions along the fault also control the whole variability of fault slip events. Moreover, when fault slip stability conditions are modulated by normal stress distribution, our experiments suggest that the along-fault stress heterogeneity influences the seismic cycle regularity and, consequently, long-term fault slip behavior. Uniform applied normal stress favors irregular seismic cycles and the occurrence of earthquakes clustering, whereas non-uniform normal stress with a single high amplitude stress asperity generates strong characteristic microquake events with stable return periods. Together our results strengthen the assumption that coseismic slip distribution and earthquake variability along an active fault may provide relevant information on long term tectonic stress and could thus improve seismic hazard assessment.
ISSN: 0012-821X

hal-01666379
https://hal.archives-ouvertes.fr/hal-01666379
DOI : 10.1016/j.epsl.2017.10.009

Éditeur(s) : HAL CCSD Nature Publishing Group
Résumé : International audience
Assessing seismic hazards remains one of the most challenging scientific issues in Earthsciences. Deep tectonic processes are classically considered as the only persistentmechanism driving the stress loading of active faults over a seismic cycle. Here we show via amechanical model that erosion also significantly influences the stress loading of thrust faultsat the timescale of a seismic cycle. Indeed, erosion rates of about B0.1–20mmyr1, asdocumented in Taiwan and in other active compressional orogens, can raise the Coulombstress by B0.1–10 bar on the nearby thrust faults over the inter-seismic phase. Masstransfers induced by surface processes in general, during continuous or short-lived andintense events, represent a prominent mechanism for inter-seismic stress loading offaults near the surface. Such stresses are probably sufficient to trigger shallow seismicity orpromote the rupture of deep continental earthquakes up to the surface.
ISSN: 2041-1723

insu-01087103
https://hal-insu.archives-ouvertes.fr/insu-01087103
https://hal-insu.archives-ouvertes.fr/insu-01087103/document
https://hal-insu.archives-ouvertes.fr/insu-01087103/file/Steer2014_NatureComm_accepted.pdf
DOI : 10.1038/ncomms6564

Éditeur(s) : HAL CCSD Société Géologique de France
Résumé : Based on a High-Resolution 3D seismic block acquired in the Gulf of Lion in 2004–2005 we investigated fluid pipes and pockmarks on the top of the interfluve between the Hérault canyon and the Bourcart canyon both created by turbidity currents and gravity flows from the shelf to the deep basin in the north-western Mediterranean Sea. Combining the geometry of the potential fluid pipes with the induced deformation of surrounding sediments leads then to the ability to differentiate between potential fluid sources (root vs source) and to better estimate the triggering mechanisms (allochtonous vs. autochtonous cause). We linked together a set of derived attributes, such as Chaos and RMS amplitude, to a 3D description of pipes along which fluids may migrate. As previously shown in other basins, the induced deformation, creating cone in cone or V-shaped structures, may develop in response to the fluid pipe propagation in unconsolidated sediments in the near surface. The level at the top of a cone structure is diachronous. It means that stratigraphic levels over this surface are deformed at the end of the migration. They collapse forming a depression called a pockmark. These pipes are the result of repeated cycles of fluid expulsion that might be correlated with rapid sea-level rise instead of sediment loading. The most recent event (MIS 2.2 stage) has led to the formation of a pockmark on the modern seafloor. It has been used as a reference for calculating the effect of a rapid sea-level rise on fluid expulsion. As all physical and geometrical parameters are constrained, we were able to define that a + 34 m of sea level rise may account for triggering fluid expulsion from a very shallow silty-sandy layer at 9 m below seafloor since the last glacial stage. This value is consistent with a sea level rise of about 102 m during this period. This study shows that the episodic nature of fluid release resulted from hydromechanical processes during sea-level rise due to the interactivity between high pressure regimes and principal in situ stresses.
ISSN: 0037-9409

hal-01667241
https://hal.archives-ouvertes.fr/hal-01667241
DOI : 10.1051/bsgf/2017190

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
Nowadays, technological advances in satellite imagery measurements as well as the development of dense geodetic and seismologic networks allow for a detailed analysis of surface deformation associated with active fault seismic cycle. However, the study of earthquake dynamics faces several limiting factors related to the difficulty to access the deep source of earthquake and to integrate the characteristic time scales of deformation processes that extend from seconds to thousands of years. To overcome part of these limitations and better constrain the role and couplings between kinematic and mechanical parameters, we have developed a new experimental approach allowing for the simulation of strike-slip fault earthquakes and analyze in detail hundreds of successive seismic cycle. Model rheology is made of multilayered visco-elasto-plastic analog materials to account for the mechanical behavior of the upper and lower crust and to allow simulating brittle/ductile coupling, postseismic deformation phase and far-field stress transfers. The kinematic evolution of the model surface is monitored using an optical system, based on subpixel spectral correlation of high-resolution digital images. First, results show that the model succeed in reproducing the deformation mechanisms and surface kinematics associated to the main phases of the seismic cycle indicating that model scaling is satisfactory. These results are comforted by using numerical algorithms to study the strain and stress distribution at the surface and at depth, along the fault plane. Our analog modeling approach appears, then, as an efficient complementary approach to investigate earthquake dynamics.
ISSN: 0278-7407

hal-01174176
https://hal.archives-ouvertes.fr/hal-01174176
DOI : 10.1002/2014TC003701

Éditeur(s) : HAL CCSD
Résumé : Several major earthquakes have struck the 2500 km long Himalayan range during the past century. However, both the maximum size of such earthquakes and the probability of occurrence of a magnitude 9 megaquake are still a mater of debate. In this framework it is of key importance to investigate the lateral segmentation of the Himalayan arc in order to deepen our understanding of the mechanisms that control such events as well as their extents. Besides the remarkably uniform tectonic set-up and the fact that most studies on the Himalayas have focused on Central Nepal, several indications of along strike changes can be gathered.This thesis brings new constraints on lateral variations of crustal structure and of deformation between western Nepal (~80°E) and eastern Bhutan (~92°E).The first part of this thesis focuses on the lateral variations of crustal structure. In the past three years we have carried out four land gravity campaigns. We have established 366 new gravity measurement points to fill the data gaps in central and western Nepal as well as in Bhutan. This new dataset, together with available seismological data, is used to constrain thermo-mechanical models of the bending of the India plate underneath the Himalayas. While the inferred crustal geometry does not exhibit major along-strike variations over central and eastern Nepal, the shorter wavelength flexure of the lithosphere in Bhutan is associated with a weaker upper mantle rheology.The second part focuses on the lateral variations of recent deformation in the Himalayas. Fifteen years of paleoseismological investigations have extended the catalogue of major Himalayan events over the last millennium. Combining these information with secular loading, we assess the spatial and temporal stress changes on the Main Himalayan Thrust along the orogen over the last nine centuries. Our calculations indicate that inter-seismic loading has now nearly overcome the Coulomb stress decrease caused by the great ~1100 medieval earthquake. Our results also point out that the 1897 Shillong plateau earthquake does not have a major influence on the stress accumulated on the Main Himalayan Thrust since then. In order to better characterize active tectonics in the Bhutan Himalayas where no studies were done so far, we carried out a morphotectonic analysis in the south-central part of the kingdom. We show that the same amount of Holocene deformation is accommodated on the frontal thrust in Bhutan as on the neighbouring portions of the Himalayan arc. We also find evidences for two major (M>8) earthquakes on this thrust in the Bhutan Himalayas during the last millennium. Our results therefore show that Bhutan cannot be considered as a seismic gap. They also challenge the interpretation of one single ~1100 medieval mega-event that would have ruptured the Main Frontal Thrust from central Nepal to eastern Bhutan.
Au cours du dernier siècle, plusieurs séismes majeurs ont affecté l'Himalaya. Cependant, la taille maximale de ces événements et la probabilité d'occurrence de méga-séismes avec des magnitudes proches de 9 sont toujours matière à débat. L'étude de la segmentation de l'arc Himalayen est donc primordiale afin de comprendre les mécanismes qui contrôlent ces séismes ainsi que leur extension spatiale. La compréhension du cycle sismique en Himalaya est aujourd'hui essentiellement basée sur des études menées au Népal central, ce qui limite notre connaissance de son fonctionnement tri-dimensionnel. Ce travail de thèse permet d'apporter de nouvelles contraintes sur les variations latérales de la déformation crustale dans la zone comprise entre l'ouest Népal (~80°E) et l'est Bhoutan (~92°E). La première partie de cette thèse est consacrée à l'étude des variations latérales de la structure lithosphérique. Quatre campagnes gravimétriques ont été réalisées entre 2010 et 2012. Elles ont permis d'étendre le réseau gravimétrique Népalais jusqu'à l'ouest Népal et d'établir le premier réseau gravimétrique Bhoutanais. Ce nouveau jeu de données, combiné avec les données sismologiques disponibles, permet de contraindre des modèles thermo-mécaniques de la flexure de la plaque Indienne sous l'Himalaya. Les résultats suggèrent qu'il n'existe pas de variations latérales majeures du comportement mécanique de la lithosphère Indienne entre le centre et l'est Népal contrairement au Bhoutan où une rigidité flexurale plus faible est nécessaire pour expliquer les données.La deuxième partie de cette thèse est consacrée à l'étude des variations latérales des déformations récentes dans le prisme Himalayen. Les études paléosismologiques menées depuis 15 ans en Himalaya ont permis d'étendre le catalogue des événements majeurs sur le dernier millénaire. En intégrant à la fois les contraintes disponibles sur ces séismes majeurs et le chargement séculaire, nous étudions les variations spatiales et temporelles de l'état de contrainte du chevauchemlent Himalayen principal le long de l'arc. Nos calculs montrent que même dans la cas où un méga-séisme se serait produit en ~1100 en Himalaya, le chargement séculaire a quasiment compensé la chute de contrainte associée. Les modèles montrent aussi que le séisme du Shillong ne joue pas un rôle majeur sur les contraintes accumulées sur le chevauchement Himalayen depuis 1897 au niveau du Bhoutan. Enfin, nous présentons les premières contraintes sur la tectonique active au Bhoutan. L'étude morphotectonique réalisée au centre du Sud-Bhoutan a permis de montrer que la majeure partie de la déformation Holocène est accommodée au niveau du front Himalayen, comme au Népal. Nous montrons aussi des évidences de ruptures de surface avec des décalages verticaux de plusieurs mètres associés à deux séismes majeurs sur le dernier millénaire. Ces évidences remettent en cause l'interprétation d'un méga-séisme en ~1100.
https://tel.archives-ouvertes.fr/tel-01002381

NNT : 2013MON20074
tel-01002381
https://tel.archives-ouvertes.fr/tel-01002381
https://tel.archives-ouvertes.fr/tel-01002381/document
https://tel.archives-ouvertes.fr/tel-01002381/file/35970_BERTHET_2013_archivage_cor.pdf

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
Iran is an active continental domain accommodating the convergence between the Arabia and Eurasia plates. In northwestern Iran, deformation between the Central Iranian block and the Caucasus domain is mainly accommodated by right lateral strike-slip on the Tabriz fault. Cities and villages, including the city of Tabriz, have been destroyed by several strong historical earthquakes (M similar to 7). In this study, we compare the slip-rates estimated from geodetic measurements (radar interferometry and UPS) with those determined by dating a geomorphological offset of an alluvial fan along the Tabriz fault. The GPS measurements along two profiles normal to the Tabriz fault suggest a slip-rate of 7.3 +/- 1.3 mm yr(-1). The persistent scatterer radar interferometry analysis of Envisat satellite archives from 2003 to 2010 shows a velocity gradient (6 +/- 3 mm yr(-1)) across the Tabriz fault in agreement with GPS results. Moreover, it reveals that most of the area located south of the Tabriz fault is affected by subsidence, and that some sections of the fault probably act as barriers to fluid migration which may have an impact on its mechanical behaviour. West of Tabriz morphotectonic investigations on an alluvial fan surface show a right-lateral cumulative offset of 320 +/- 40 m Luminescence analyses of the coarse matrix alluvial fan deposits provide an age of 46 +/- 3 ka. This yields a slip-rate comprised between 6.5 and 7.3 mm yr(-1) along this segment. These results suggest that the Late Quaternary slip-rate is in agreement with the present-day slip-rate estimated by geodetic measurements, showing no slip-rate changes during the past 45 000 yr. Short-term variations within the 45 000 yr related to temporal earthquake clustering over few seismic cycles cannot be ruled out, but if they exist, they do not affect the geodetic and the geomorphological estimates. This study is in agreement with previous ones suggesting that long-term slip-rates (i.e. averaged over several tens of seismic cycles) are consistent with geodetic estimated slip-rates (i.e. extrapolated from few years of interseismic observations), and suggests that perturbations of fault slip-rates are related to variations over few seismic cycles.
ISSN: 0956-540X

hal-00844695
https://hal.archives-ouvertes.fr/hal-00844695
https://hal.archives-ouvertes.fr/hal-00844695v2/document
https://hal.archives-ouvertes.fr/hal-00844695/file/rizza2013.pdf
DOI : 10.1093/gji/ggt041

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
Analysis of continuous seismic data recorded by a dense passive seismological network (Hi-CLIMB) installed across the Himalayas reveals strong spatial and temporal variations in the ambient seismic energy produced at high frequencies (>1 Hz). From June to September 2003, the high-frequency seismic noise is observed to increase up to 20 dB (relative to (m/s)(2)/Hz) for all the stations located along a steep 30-km-long narrow and deeply incised channel of the Trisuli River, a major trans-Himalayan river. The early summer increase in high-frequency energy is modulated by a 24-h periodicity where the minimum of seismic noise level is reached around noon and the maximum is reached late in the evening. A detailed study of seismic noise amplitude reveals a clear correlation with both regional meteorological and hydrological data along the Trisuli River. Seasonal increase in ambient noise coincides with the strong monsoon rainfall and a period of rapid melting of snow and ice in the high elevations. The observed 24-h cyclicity is consistent with the daily fluctuation of the precipitation and river discharge in the region. River-induced seismic noise is partly generated by stream turbulence, but this mechanism fails to explain the observed clockwise hysteresis of seismic noise amplitude versus water level. This pattern is better explained if a significant part of the observed seismic noise is caused by ground vibrations generated by bed load transport. This points out the potential of using background seismic noise to quantify in continuous river bed load and monitor its spatial variations, which remain difficult with classical approaches.
ISSN: 2169-9313

hal-00412170
https://hal.archives-ouvertes.fr/hal-00412170
DOI : 10.1029/2007JB005034

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
Energy dissipation is observed on seismic data when a wave propagates through a porous medium, involving different frequency regimes depending on the nature of rock and fluid types. We focus here on the role of partial fluid saturation in unconsolidated porous media, looking in particular at P-wave phase velocity and attenuation. The study consists in running an experiment in a sand-filled tank partially saturated with water. Seismic propagation in the tank is generated in the kHz range by hitting a steel ball on a granite plate. Seismic data are recorded by buried accelerometers and injecting or extracting water controls the partial saturation. Several imbibition/drainage cycles were performed between the water and gas residual saturations. A Continuous Wavelet Transform applied on seismic records allowed us to extract the direct P-wave at each receiver.We observe an hysteresis in phase velocities and inverse quality factors between imbibition and drainage. Phase velocities and inverse quality factors are then jointly inverted to get a final poro-visco-elastic model of the partially saturated sand that satisfactorily reproduces the data. The model formulation consists in generalizing the Biot theory to effective properties of the fluid and medium (permeability and bulk modulus) in order to properly explain the phase velocity variation as a function of the saturation. The strong level of attenuation measured experimentally is further explained by an anelastic effect due to grain to grain sliding, adding to Biot's losses. This study shows that fluid distribution at microscopic scale has strong influence on the attenuation of direct P-waves at macroscopic scale and confirms that seismic prospection may be a powerful tool for the characterization of transport phenomena in porous media.
ISSN: 0956-540X

hal-00779920
https://hal.archives-ouvertes.fr/hal-00779920
https://hal.archives-ouvertes.fr/hal-00779920/document
https://hal.archives-ouvertes.fr/hal-00779920/file/Barriere_et_al_HAL.pdf
DOI : 10.1111/j.1365-246X.2012.05691.x

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
To improve earthquake location, we create a 3-D a priori P-wave velocity model (3-DVM) that approximates the large velocity variations of the Ecuadorian subduction system. The 3-DVM is constructed from the integration of geophysical and geological data that depend on the structural geometry and velocity properties of the crust and the upper mantle. In addition, specific station selection is carried out to compensate for the high station density on the Andean Chain. 3-D synthetic experiments are then designed to evaluate the network capacity to recover the event position using only P arrivals and the MAXI technique. Three synthetic earthquake location experiments are proposed: (1) noise-free and (2) noisy arrivals used in the 3-DVM, and (3) noise-free arrivals used in a 1-DVM. Synthetic results indicate that, under the best conditions (exact arrival data set and 3-DVM), the spatiotemporal configuration of the Ecuadorian network can accurately locate 70 per cent of events in the frontal part of the subduction zone (average azimuthal gap is 289° ± 44°). Noisy P arrivals (up to ± 0.3 s) can accurately located 50 per cent of earthquakes. Processing earthquake location within a 1-DVM almost never allows accurate hypocentre position for offshore earthquakes (15 per cent), which highlights the role of using a 3-DVM in subduction zone. For the application to real data, the seismicity distribution from the 3-D-MAXI catalogue is also compared to the determinations obtained in a 1-D-layered VM. In addition to good-quality location uncertainties, the clustering and the depth distribution confirm the 3-D-MAXI catalogue reliability. The pattern of the seismicity distribution (a 13 yr record during the inter-seismic period of the seismic cycle) is compared to the pattern of rupture zone and asperity of the Mw = 7.9 1942 and the Mw = 7.7 1958 events (the Mw = 8.8 1906 asperity patch is not defined). We observe that the nucleation of 1942, 1958 and 1906 events coincides with areas of positive Simple Bouguer anomalies and areas where marine terraces are still preserved on the coastal morphology. From north to south: (1) the 1958 rupture zone is almost aseismic and is attributed to a zone of high coupling; (2) south of the Galera alignment (perpendicular to the trench), the 1942 rupture zone presents moderate seismicity, deeper on the seismogenic interplate zone, and abutting on the Jama cluster (to the south). This cluster is facing the Cabo Pasado cap and positive Bouguer anomalies on the overriding margin. We suspect that this cluster reflects a zone of local asperity (partial coupling). South of the Jama cluster, the spherical aseismic zone in the Bahia area is interpreted as having a low seismic coupling (steady creep motion or slow slip events). We suspect that the site that generated the three M > 7 events (1896, 1956 and 1998) correspond to a small patch of strong coupling. To the south, in the Manta-Puerto Lopez zone, the seismicity is mainly organized in earthquake swarms (1998, 2002, 2005). Although slow slip events have been observed in the area (Vallée et al. submitted), we infer from the coastline shape, the marine terraces and the high positive Bouguer anomalies that the seismicity here might reveal a significant amount of seismic coupling.
ISSN: 0956-540X

hal-00873478
https://hal.archives-ouvertes.fr/hal-00873478
DOI : 10.1093/gji/ggs083

Éditeur(s) : Pergamon-elsevier Science Ltd
Résumé : Society's needs for a network of in situ ocean observing systems cross many areas of earth and marine science. Here we review the science themes that benefit from data supplied from ocean observatories. Understanding from existing studies is fragmented to the extent that it lacks the coherent long-term monitoring needed to address questions at the scales essential to understand climate change and improve geo-hazard early warning. Data sets from the deep sea are particularly rare with long-term data available from only a few locations worldwide. These science areas have impacts on societal health and well-being and our awareness of ocean function in a shifting climate. Substantial efforts are underway to realise a network of open-ocean observatories around European Seas that will operate over multiple decades. Some systems are already collecting high-resolution data from surface, water column, seafloor, and sub-seafloor sensors linked to shore by satellite or cable connection in real or near-real time, along with samples and other data collected in a delayed mode. We expect that such observatories will contribute to answering major ocean science questions including: How can monitoring of factors such as seismic activity, pore fluid chemistry and pressure, and gas hydrate stability improve seismic, slope failure, and tsunami warning? What aspects of physical oceanography, biogeochemical cycling, and ecosystems will be most sensitive to climatic and anthropogenic change? What are natural versus anthropogenic changes? Most fundamentally, how are marine processes that occur at differing scales related? The development of ocean observatories provides a substantial opportunity for ocean science to evolve in Europe. Here we also describe some basic attributes of network design. Observatory networks provide the means to coordinate and integrate the collection of standardised data capable of bridging measurement scales across a dispersed area in European Seas adding needed certainty to estimates of future oceanic conditions. Observatory data can be analysed along with other data such as those from satellites, drifting floats, autonomous underwater vehicles, model analysis, and the known distribution and abundances of marine fauna in order to address some of the questions posed above. Standardised methods for information management are also becoming established to ensure better accessibility and traceability of these data sets and ultimately to increase their use for societal benefit. The connection of ocean observatory effort into larger frameworks including the Global Earth Observation System of Systems (GEOSS) and the Global Monitoring of Environment and Security (GMES) is integral to its success. It is in a greater integrated framework that the full potential of the component systems will be realised. Crown Copyright (C) 2011 Published by Elsevier Ltd. All rights reserved.
Progress In Oceanography (0079-6611) (Pergamon-elsevier Science Ltd), 2011-10 , Vol. 91 , N. 1 , P. 1-33

Droits : 2011 Published by Elsevier Ltd. All rights reserved.
http://archimer.ifremer.fr/doc/00044/15557/15923.pdf
DOI:10.1016/j.pocean.2011.05.001
http://archimer.ifremer.fr/doc/00044/15557/

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
No major earthquake occurred in North Chile since the 1877 Mw 8.6 subduction earthquake that produced a huge tsunami. However, geodetic measurements conducted over the last decade in this area show that the upper plate is actually deforming, which reveals some degree of locking on the subduction interface. This accumulation of elastic deformation is likely to be released in a future earthquake. Because of the long elapsed time since 1877 and the rapid accumulation of deformation (thought to be 6-7 cm yr−1), many consider this area is a mature seismic gap where a major earthquake is due and seismic hazard is high. We present a new Global Positioning System (GPS) velocity field, acquired between 2008 and 2012, that describes in some detail the interseismic deformation between 18°S and 24°S. We invert for coupling distribution on the Nazca-South America subduction interface using elastic modelling. Our measurements require that, at these latitudes, 10 to 12 mm yr−1 (i.e. 15 per cent of the whole convergence rate) are accommodated by the clockwise rotation of an Andean block bounded to the East by the subandean fold-and-thrust belt. This reduces the accumulation rate on the subduction interface to 56 mm yr−1 in this area. Coupling variations on the subduction interface both along-strike and along-dip are described. We find that the North Chile seismic gap is segmented in at least two highly locked segments bounded by narrow areas of weak coupling. This coupling segmentation is consistent with our knowledge of the historical ruptures and of the instrumental seismicity of the region. Intersegment zones (Iquique, Mejillones) correlate with high background seismic rate and local tectonic complexities on the upper or downgoing plates. The rupture of either the Paranal or the Loa segment alone could easily produce a Mw 8.0-8.3 rupture, and we propose that the Loa segment (from 22.5°S to 20.8°S) may be the one that ruptured in 1877.
ISSN: 0956-540X

hal-00941279
https://hal.archives-ouvertes.fr/hal-00941279
DOI : 10.1093/gji/ggt183

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
Seismic reflection profiles from the sediment rich Alaska subduction zone image short, frontally accreted, imbricate thrust slices and repeated sequences of long, underthrust sheets. Rapid landward increases in wedge thickness, backthrusting, and uplift of the forearc are observed, suggesting underthrusting beneath the wedge. These features and a widely varying frontal wedge morphology are interpreted to be caused by different modes of accretion active concurrently along the trench at different locations. Episodic wedge growth is observed in high basal friction experiments using sand as an analog material. Two phases of an accretionary cycle can be distinguished: frontal accretion of short imbricate thrust slices, alternating with underthrusting of long, undeformed sheets. The phase is shown experimentally to depend upon the surface slope of the wedge. Mechanical analysis of the forces at work predicts these two modes of deformation due to the varying frictional forces and yield strengths for a temporally varying wedge geometry. Maximum length of thrust slices is calculated for experimental conditions and confirmed by the observations. For a steep frontal slope (at the upper limit of the Mohr-Coulomb taper stability field) the overburden is too great to permit underthrusting, and failure occurs repeatedly at the wedge front producing short imbricate slices. The wedge grows forward, lowering the surface angle to the minimum critical taper. For a shallow frontal slope the reduced overburden along an active roof thrust permits sustained underthrusting, causing frontal erosion and backthrusting, steepening the wedge and thus completing the cycle.
ISSN: 0148-0227

hal-01261538
https://hal.archives-ouvertes.fr/hal-01261538
https://hal.archives-ouvertes.fr/hal-01261538/document
https://hal.archives-ouvertes.fr/hal-01261538/file/gutscherJGR1998.pdf

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
We carried out morphotectonic studies along the left-lateral strike-slip Bogd Fault, the principal structure involved in the Gobi-Altay earthquake of 1957 December 4 (published magnitudes range from 7.8 to 8.3). The Bogd Fault is 260 km long and can be subdivided into five main geometric segments, based on variation in strike direction. West to East these segments are, respectively: the West Ih Bogd (WIB), The North Ih Bogd (NIB), the West Ih Bogd (WIB), the West Baga Bogd (WBB) and the East Baga Bogd (EBB) segments. Morphological analysis of offset streams, ridges and alluvial fans-particularly well preserved in the arid environment of the Gobi region-allows evaluation of late Quaternary slip rates along the different faults segments. In this paper, we measure slip rates over the past 200 ka at four sites distributed across the three western segments of the Bogd Fault. Our results show that the left-lateral slip rate is similar to 1 mm yr(-1) along the WIB and EIB segments and similar to 0.5 mm yr(-1) along the NIB segment. These variations are consistent with the restraining bend geometry of the Bogd Fault.;Our study also provides additional estimates of the horizontal offset associated with the 1957 earthquake along the western part of the Bogd rupture, complementing previously published studies. We show that the mean horizontal offset associated with the 1957 earthquake decreases progressively from 5.2 m in the west to 2.0 m in the east, reflecting the progressive change of kinematic style from pure left-lateral strike-slip faulting to left-lateral-reverse faulting. Along the three western segments, we measure cumulative displacements that are multiples of the 1957 coseismic offset, which may be consistent with a characteristic slip. Moreover, using these data, we re-estimate the moment magnitude of the Gobi-Altay earthquake at M-w 7.78-7.95.;Combining our slip rate estimates and the slip distribution per event we also determined a mean recurrence interval of similar to 2500-5200 yr for past earthquakes along the different segments of the western Bogd Fault. This suggests that the three western segments of the Bogd Fault and the Gurvan Bulag thrust fault (a reverse fault bounding the southern side of the Ih Bogd range that ruptured during the 1957 earthquake) have similar average recurrence times, and therefore may have ruptured together in previous earthquakes as they did in 1957. These results suggest that the western part of the Bogd Fault system, including the Gurvan Bulag thrust fault, usually behaves in a 'characteristic earthquake' mode.
ISSN: 0956-540X

hal-00639467
https://hal.archives-ouvertes.fr/hal-00639467
https://hal.archives-ouvertes.fr/hal-00639467v2/document
https://hal.archives-ouvertes.fr/hal-00639467/file/rizzaGJI2011.pdf
DOI : 10.1111/j.1365-246X.2011.05075.x

Éditeur(s) : HAL CCSD Elsevier
Résumé : The seismic characteristics of focused fluid-related features such as pockmarks and carbonate build-ups on the Nigerian continental slope have been investigated using complementary seismic data sets (reprocessed 3D exploration data and 2D Very High Resolution hull-mounted and near-bottom seismic data) coupled with the results of previous studies (sedimentological, geotechnical and geochemical analyses).The results show different types of fluid-related features within the hemipelagic phase of long duration (∼1 Myr) Turbidite/Hemipelagic cycles. They are the product of the disturbance of the hosting sediments following two main distinct processes: (1) no or low sediment deposition caused by fluid escape associated with seafloor settlement (benthic fauna, carbonate precipitation, gas hydrate formation) and (2) post-depositional erosion, caused either by fluid release (dewatering from underlying features such as channels and upward migration from a deep source) or by collapse (destabilisation of gas hydrates). The temporal evolution reveals a decrease in fluid flow during the hemipelagic deposition as witnessed by the decrease in methanogenic activity and by gas hydrate destabilisation. The spatial distribution of fluid-related features seems to be controlled by the type of fault (small fault or structural lineament).
ISSN: 0264-8172

hal-01685513
https://hal.archives-ouvertes.fr/hal-01685513
DOI : 10.1016/j.marpetgeo.2017.10.004

Éditeur(s) : HAL CCSD
Résumé : This work focus on the characterization of the source and dynamic of compactional fluids during sedimentary burial, through two complementary examples of late orogenic oil‐field half‐grabens: The exhumed Lodève Permian Basin and a deep buried Jurassic basin in the North Viking Graben (North Sea).Constituting the main part of the thesis, a multi‐disciplinary approach was conducted in the Lodève Basin where Ba‐F‐Cu‐Pb polymetallic mineralized systems are trapped into synrift faults and paleokarsts in the carbonate basement at the hinge point of the rollover. The source, timing and P/T conditions of fluid migration were deduced from the analysis of the microfabric, the fluid inclusions microthermometry, and the isotopic (Sr, S, O, H) and Rare Earth Element (REE) signature. Results are then crossed with a structural and thermal modeling that consolidates the sequence and dynamics of fluid during burial.A similar approach was conducted in the North Viking Graben where fluid markers are restricted to 3D seismic and well core data. Comparable Ba‐Pb‐Zn veins are reported in basin margin, plugging one of the most important siliciclastic hydrocarbon reservoir in the substratum. This analysis provides additional constraints on basinal fluid behavior and allows us to propose a global dynamic model for various compositions of fluids and reservoirs.We conclude to a polyphase fluid sequence history including:(a) In the carbonate basement of the Lodève Basin, karstic paleocanyon incisions and associated cavities coupled to synrift fault, act as major drain for fluids. These structures are early affected by hypogen‐sulfuric karstification in response to the interaction between bacterial oxidation of sulfides entrapped within Lower Permian blackshales and the basement oxidizing aquifer.(b) Disequilibrium compaction initiates overpressure‐driven basinal fluid migration towards basin margins, characterized by temperatures around 150‐180°C and salinities between 9 et 18wt%eq.NaCl. Isotopic (Sr, S, O) and REE analyses reveal that Ba‐M+‐rich mineralizing fluids derived mainly from buried blackshales diagenesis. External fluids coming from the lower crust are also identified that play a key role in fluorite precipitation by the leaching of late hercynian granites (mean temperature of 250°C and salinity > 20wt%eq.NaCl).(c) During the synrift period, fluid overpressure is responsible for the periodic reactivation of fault plane according to seismic‐valve process, bedded‐control shearing and hydraulic brecciation at the basement‐seal interface. These mechanisms induce cyclic polymetallic mineralization by the mixing between in‐situ formation water and deep ascending basinal fluids.(d) Thermogenic fluids expulsion starts with last basinal fluids during late burial stage. Hydrocarbons thus migrate along the same regional pathways up to the rollover crest, where they are partly rerouted by the previous mineralized baffle.(e) In the Lodève basin, post‐rift exhumation of the margins led to the remobilization of synrift deposits by subaerial biochemical processes at the sulfate‐methane transition. The latter results from the interaction between the still active hydrocarbon dysmigration with a playa lake sulfate‐rich aquifer. Secondary low‐temperature barite fronts precipitate then within basement meteoric karsts.In addition to the « source to sink » model of basinal fluids, this work provides new insights on the early plugging of hydrocarbon reservoirs and for the metallogenesis of Mississippi Valley‐Type deposits.
Ce travail porte sur la caractérisation de la source et de la dynamique des fluides de bassin au cours de leur chargement à travers deux exemples complémentaires de demi‐grabens tardi‐orogéniques pétroliers : Le Bassin Permien de Lodève, aujourd’hui à l’affleurement et un bassin jurassique enfouis dans le North Viking Graben (Mer du Nord).Le coeur de la thèse concerne le Bassin de Lodève où, à partir d’une approche pluridisciplinaire intégrée, nous avons caractérisé l’architecture des minéralisations (Ba, F, Cu, Pb) piégées dans un réseau paléokarstique alimenté par les failles syn‐rift, dans le substratum carbonaté à l’apex du roll‐over. La source, le calendrier et les conditions de migration des fluides ont été approchés à partir de l’analyse de la micro‐fabrique, la microthermométrie sur inclusions fluides, les analyses isotopiques (Sr, S, O, H) et de Terres Rares. Les résultats analytiques ont été enfin croisés avec un modèle thermique et structural du bassin qui conforte la séquence et la dynamique du système fluide en cours d’enfouissement.Une démarche similaire, mais plus limitée, a été conduite dans le bassin du North Viking Graben où l’accès aux marqueurs fluides est restreint aux données de sismique 3D et de carottes. Comme à Lodève, les minéralisations Ba‐Pb‐Zn colmatent un réservoir dans le substratum à l’apex du roll‐over. Elles se présentent sous forme de ciments dans des grès ou des fractures. Cette analyse apporte des contraintes complémentaires et permet de proposer un modèle dynamique général avec des variantes en fonction de la nature des fluides et des réservoirs.On retiendra donc la séquence fluide suivante :(a) Dans le cas du bassin de Lodève sur substratum carbonaté, les chemins préférentiels de drainage se développent dans des paléocanyons N‐S couplés à un réseau de fractures et d’endokarsts météoriques. Ces derniers sont élargis en début de rifting par la dissolution hypogène sulfurique produite par l’oxydation bactérienne des sulfates et des pyrites des blackshales, au contact de l’aquifère oxydant du Cambrien.(b) Le déséquilibre de compaction initie la migration des fluides interstitiels en surpression vers les marges avec des températures autour de 150‐180°C et des salinités entre 9 et 18wt%eq.NaCl. Les analyses isotopiques (Sr, S, O) révèlent que la majorité des fluides provient de l’altération diagénétique des blackshales riches en métaux. Des interactions sont également mises en évidence avec des fluides profonds (entre 240°C et 260°C ; salinités > à 20wt%eq.NaCl), qui lessivent les granites tardi‐hercyniens.(c) Pendant le syn‐rift, les conditions de surpression de fluide permettent la réactivation cyclique des failles, les décollements stratigraphiques et la formation de brèches hydrauliques, favorisant la mise en connexion avec les réservoirs superficiels à l’apex du rollover. Le modèle de Sibson ajusté aux fluides de bassins est alors le moteur de la migration verticale.(d) Les fluides thermogéniques commencent à être expulsés avec les derniers fluides de compaction au cours d’un stade plus évolué de l’enfouissement en empruntant les mêmes chemins jusqu’à l’apex du roll over. Ils sont alors partiellement freinés et déviés par les colmatages minéralisés antérieurs.(e) A Lodève, la continentalisation des minéralisations antérieures au cours de l’exhumation post‐rift conduit à leur remaniement partiel au niveau de la transition sulfate‐méthane induite par l’interaction entre une playa évaporitique et la dysmigration des hydrocarbures. Des barytines secondaires de basse température, déprimées en Sr sont alors précipitées de manière synsédimentaire dans des karsts météoriques du socle.Outre l’illustration d’un modèle complet (source to sink) de dynamique des fluides dans un bassin, ce travail apporte de nouvelles contraintes dans l’approche du colmatage des réservoirs à hydrocarbures sur les têtes de blocs basculés et sur la genèse des gîtes miniers de type Mississippi Valley‐Type.
https://hal.archives-ouvertes.fr/tel-01457583

tel-01457583
https://hal.archives-ouvertes.fr/tel-01457583
https://hal.archives-ouvertes.fr/tel-01457583/document
https://hal.archives-ouvertes.fr/tel-01457583/file/th%C3%A8seLaurent2015V2.pdf

Éditeur(s) : Elsevier
Résumé : The Danube Canyon is a large shelf-indenting canyon that has developed seaward of the late Pleistocene paleo-Danube valley. Mechanisms of canyon evolution and factors that controlled it are revealed by analyzing the morphology and the sedimentary structure of the canyon, as well as the main features of the continental margin around the canyon. This is based on investigation by swath bathymetry in the canyon area combined with different types of seismic data. The canyon is a major erosional trough with a flat bottom cut by an entrenched axial thalweg. The thalweg path varies from highly meandering to fairly straight in relation to the local gradient. Segments of the canyon are characterized by specific morphology, orientation and gradient along the axial thalweg. We interpret these segments in terms of canyon maturity. The sedimentary structure of the canyon documents an older phase of erosion followed by partial infilling, and thus attests for repeated cycles of canyon development. Canyon morphology is interpreted as a result of erosive sediment flows along the entrenched axial thalweg that caused downcutting into the canyon bottom and instability of the canyon walls, and hence enlargement of the canyon and expansion by headward erosion. During the last lowstand level of the Black Sea the canyon was located in an area of high sediment supply close to the paleo-Danube River mouths. This is indicated by buried fluvial channels on the shelf and by a wave-cut terrace associated with a water level situated about - 90 m below the present level. We infer that erosive flows in the canyon resulted from hyperpycnal currents at the river mouths, probably favored by the low salinity environment that characterized the Black Sea during lowstand times. Other mechanisms could have contributed to trigger sediment failure along the canyon, such as instability related to the presence of shallow gas, or the effect of a deep fault.
Marine Geology (0025-3227) (Elsevier), 2004-05 , Vol. 206 , N. 1-4 , P. 249-265

Droits : 2004 Elsevier B.V. All rights reserved
http://archimer.ifremer.fr/doc/2004/publication-476.pdf
DOI:10.1016/j.margeo.2004.03.003
http://archimer.ifremer.fr/doc/00000/476/

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Subduction processes play a major role in plate tectonics and the subsequent geological evolution of Earth. This special issue focuses on ongoing research in subduction dynamics to a large extent (oceanic subduction, continental subduction, obduction…) for both past and active subduction zones and into mountain building processes and the early evolution of orogens. It puts together various approaches combining geophysics (imaging of subduction zones), petrology/geochemistry (metamorphic analysis of HP-UHP rocks, fluid geochemistry and magmatic signal, geochronology), seismology and geodesy (present-day evolution of subduction zones, active tectonics), structural geology (structure and evolution of mountain belts), and numerical modelling to provide a full spectrum of tools that can be used to constrain the nature and evolution of subduction processes and orogeny. Studies presented in this special issue range from the long-term (orogenic cycle) to short-term (seismic cycle).
ISSN: 0264-3707

insu-01287985
https://hal-insu.archives-ouvertes.fr/insu-01287985
https://hal-insu.archives-ouvertes.fr/insu-01287985/document
https://hal-insu.archives-ouvertes.fr/insu-01287985/file/rolland-2016.pdf
DOI : 10.1016/j.jog.2016.03.006