Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
We carried out morphotectonic studies along the left-lateral strike-slip Bogd Fault, the principal structure involved in the Gobi-Altay earthquake of 1957 December 4 (published magnitudes range from 7.8 to 8.3). The Bogd Fault is 260 km long and can be subdivided into five main geometric segments, based on variation in strike direction. West to East these segments are, respectively: the West Ih Bogd (WIB), The North Ih Bogd (NIB), the West Ih Bogd (WIB), the West Baga Bogd (WBB) and the East Baga Bogd (EBB) segments. Morphological analysis of offset streams, ridges and alluvial fans-particularly well preserved in the arid environment of the Gobi region-allows evaluation of late Quaternary slip rates along the different faults segments. In this paper, we measure slip rates over the past 200 ka at four sites distributed across the three western segments of the Bogd Fault. Our results show that the left-lateral slip rate is similar to 1 mm yr(-1) along the WIB and EIB segments and similar to 0.5 mm yr(-1) along the NIB segment. These variations are consistent with the restraining bend geometry of the Bogd Fault.;Our study also provides additional estimates of the horizontal offset associated with the 1957 earthquake along the western part of the Bogd rupture, complementing previously published studies. We show that the mean horizontal offset associated with the 1957 earthquake decreases progressively from 5.2 m in the west to 2.0 m in the east, reflecting the progressive change of kinematic style from pure left-lateral strike-slip faulting to left-lateral-reverse faulting. Along the three western segments, we measure cumulative displacements that are multiples of the 1957 coseismic offset, which may be consistent with a characteristic slip. Moreover, using these data, we re-estimate the moment magnitude of the Gobi-Altay earthquake at M-w 7.78-7.95.;Combining our slip rate estimates and the slip distribution per event we also determined a mean recurrence interval of similar to 2500-5200 yr for past earthquakes along the different segments of the western Bogd Fault. This suggests that the three western segments of the Bogd Fault and the Gurvan Bulag thrust fault (a reverse fault bounding the southern side of the Ih Bogd range that ruptured during the 1957 earthquake) have similar average recurrence times, and therefore may have ruptured together in previous earthquakes as they did in 1957. These results suggest that the western part of the Bogd Fault system, including the Gurvan Bulag thrust fault, usually behaves in a 'characteristic earthquake' mode.
ISSN: 0956-540X

hal-00639467
https://hal.archives-ouvertes.fr/hal-00639467
https://hal.archives-ouvertes.fr/hal-00639467v2/document
https://hal.archives-ouvertes.fr/hal-00639467/file/rizzaGJI2011.pdf
DOI : 10.1111/j.1365-246X.2011.05075.x

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
Knowing the slip amplitudes that large earthquakes produced in prehistorical times is one key to anticipate the magnitude of large forthcoming events. It is long known that the morphology is preserving remnants of paleoearthquake slips in the form of fault-offset landforms. However, the measured offsets that can be attributed to the most recent paleoearthquakes are generally few along a fault, so that they rarely allow recovering the slip distributions and largest slips of these earthquakes. We acquired ~1 m resolution airborne lidar data on a 30 km stretch of a fast-slipping strike-slip fault (eastern Hope Fault, New Zealand) located in a region of high alluvial dynamics where landforms are rapidly evolving. Data analysis reveals >200 offset landforms; only 30% allow a good to moderate quality offset measurement. From these good to moderate quality measures, we recover the slip-length distributions and largest slips of the four most recent large paleoearthquakes and find evidence of 4–6 prior events. The record suggests that large earthquake slip recurred in multiples of about 4 m along the 30 km stretch. Although they have larger uncertainties, the more numerous lower-quality offsets that we also measured reveal a similar earthquake slip record. This shows that, although offset landforms are partly degraded in dynamically active landscapes, they store valuable information on paleoearthquake slips. This information might be recovered provided that the morphology is analyzed at high resolution and " continuously " over a significant fault length. Remote lidar data are powerful to perform such analyses.
ISSN: 2169-9313

insu-01469219
https://hal-insu.archives-ouvertes.fr/insu-01469219
https://hal-insu.archives-ouvertes.fr/insu-01469219/document
https://hal-insu.archives-ouvertes.fr/insu-01469219/file/Manighetti_et_al-2015-Journalsur Geophysical_Research__Solid_Earth.pdf
DOI : 10.1002/2014JB011787

Éditeur(s) : HAL CCSD European Geosciences Union
Résumé : International audience
Earth deformation is a multi-scale process ranging from seconds (seismic deformation) to millions of years (tectonic deformation). Bridging short- and long-term deformation and developing seismotectonic models has been a challenge in experimental tectonics for more than a century. Since the formulation of Reid's elastic rebound theory 100 years ago, laboratory mechanical models combining frictional and elastic elements have been used to study the dynamics of earthquakes. In the last decade, with the advent of high-resolution monitoring techniques and new rock analogue materials, laboratory earthquake experiments have evolved from simple spring-slider models to scaled analogue models. This evolution was accomplished by advances in seismology and geodesy along with relatively frequent occurrences of large earthquakes in the past decade. This coincidence has significantly increased the quality and quantity of relevant observations in nature and triggered a new understanding of earthquake dynamics. We review here the developments in analogue earthquake modelling with a focus on those seismotectonic scale models that are directly comparable to observational data on short to long timescales. We lay out the basics of analogue modelling, namely scaling, materials and monitoring, as applied in seismotectonic modelling. An overview of applications highlights the contributions of analogue earthquake models in bridging timescales of observations including earthquake statistics, rupture dynamics, ground motion, and seismic-cycle deformation up to seismotectonic evolution.
ISSN: 1869-9510

hal-01553120
https://hal.archives-ouvertes.fr/hal-01553120
https://hal.archives-ouvertes.fr/hal-01553120/document
https://hal.archives-ouvertes.fr/hal-01553120/file/rosenau2017.pdf
DOI : 10.5194/se-8-597-2017

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
We present a 2-D Contact Dynamics discrete element model for simulating initiation and motion of rock avalanches, integrating hillslope geometry, Mohr-Coulomb rock behavior, pore pressure before avalanche triggering, and avalanche trigger. Avalanche motion is modeled as a dense granular flow of dry frictional and cohesive particles. On the basis of granular physics and shear experiments, we review some of the theories for the unexpectedly long runout of rock avalanches. Different causes are evoked, according to the strength (strong or weak) of the slip surface relative to the bulk. "Mechanical fluidization'' and "acoustic fluidization'' theories state that agitation of rock particles reduces frictional strength, increasing runout. Conversely, granular mechanics suggests that, as "shear-strain'' rate increases, granular material becomes more agitated, more dissipative, and more resistant. Another theory states that dynamic fragmentation of clasts creates an isotropic pressure that drives longer runout. In contrast, granular mechanics suggests that fragmentation may induce fluidization and strengthening of the granular material, while particle size reduction (among others) induces weakening of the granular flow and enhances long runout. Runout is also enhanced for column-like rock masses collapsing from steep hillslopes. Long runout may also be linked to thermal weakening mechanisms at the slip surface (e.g., thermal pressurization, and shear melting), which may lower drastically the shear strength. The model is illustrated with a hypothetical example of a rain-triggered avalanche, mobilizing shallowly dipping layers. Several phases are identified, including slope failure, avalanche triggering resulting from slip weakening, and avalanche motion in which rocks are folded and sheared.
ISSN: 0148-0227

hal-00420883
https://hal.archives-ouvertes.fr/hal-00420883
DOI : 10.1029/2008JF001072

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Longmen Shan range is one of the major topographic and structural features of the easternmargin of the Tibetan Plateau. With an impressive topographic gradient and low convergence rates across the range this region has raised important questions concerning the dynamics of plateaumargin settings, such as the long-term mechanisms of topographic evolution. The investigation of the distribution in space and time of denudation can provide critical insight into such dynamics and shed light on still unresolved controversies. For that purpose, we present a new dataset that documents the intensity and distribution of denudation processes across this plateaumargin through field survey of fluvial incision markers, quantitative geomorphology and cosmogenic nuclide derived basin-wide erosion rates. Erosion is < 0.5 mm/year in the frontal region of the Longmen Shan and between 0.5 and 1 mm/year further west, with a gradual decrease when reaching the northern headwaters of the Min Jiang watershed, adjacent to the beginning of the Tibetan Plateau. The spatialdistribution of denudation inferred from the various methods we use suggests that most of the differential uplift in the Central Longmen Shan is accommodated by the Beichuan Fault and frontal structures located in the foothills. The denudation pattern seems also to reflect the large-scale propagation of erosion from the Sichuan Basin toward the Plateau. This suggests that the Longmen Shan range is submitted to the combined influences of slow thrusting activity on the frontal structures and progressive westward regressiveerosion as a probable response to a pulse of uplift of the Tibetan PlateauEasternmargin, that started 10 Ma ago.
ISSN: 0040-1951

hal-01564192
https://hal.archives-ouvertes.fr/hal-01564192
DOI : 10.1016/j.tecto.2009.10.026

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
During the last decade, the interaction of deep processes in the lithosphere and mantle with surface processes (erosion, climate, sea-level, subsidence, glacio-isostatic readjustment) has been the subject of heated discussion. The use of a multidisciplinary approach linking geology, geophysics, geodesy, modelling, and geotechnology has led to the awareness of coupled deep and surface processes. Deep earth dynamics (topography, erosion, tectonics) are strongly connected to natural hazards such as earthquakes, landslides, and tsunamis; sedimentary mass transfers have important consequences on isostatic movements and on georesources, geothermal energy repartitions. The ability to read and understand the link between deep Earth dynamics and surface processes has therefore important societal impacts. Ground-truthing at carefully-selected sites of investigation is imperative to better understand these connections.Due to its youth (<30 Ma) and its subsidence history, the almost land-locked Gulf of Lion–Sardinia continental margins system provides a unique record of sedimentary deposition from the Miocene to present. Due to its high subsidence rate, palaeoclimatic variations, tectonic events and vertical evolution are all recorded here at very high resolution. The late Miocene isolation and desiccation of the Mediterranean, the youngest and most catastrophic event, the Messinian Salinity Crisis (MSC), induced drastic changes in marine environments: widespread deposition of evaporite (gypsum, anhydrite and halite) in the central basin, and intense subaerial erosion along its periphery. These extraordinary mass transfers from land to sea induced strong isostatic re-adjustments that are archived in the sedimentary record and represent a window to the lithospheric rheology and the deep processes.The GOLD (Gulf of Lion Drilling) project, proposes to explore this unique sedimentary record as well as the nature of the deep crustal structure, providing valuable information about the mechanisms underlying vertical motions in basins and their margins.
ISSN: 0264-8172

insu-01197393
https://hal-insu.archives-ouvertes.fr/insu-01197393
https://hal-insu.archives-ouvertes.fr/insu-01197393/document
https://hal-insu.archives-ouvertes.fr/insu-01197393/file/Rabineau%20et%20al.-final-MPG2014_REVISED-FINAL-No-Marked_FINAL%2BFigures.pdf
DOI : 10.1016/j.marpetgeo.2015.03.018

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
To estimate the seismic hazard, the geometry (dip, length and orientation) and the dynamics (type of displacements and amplitude) of the faults in the area of interest need to be understood. In this paper, in addition to geomorphologic observations, we present the results of two ground penetrating radar (GPR) campaigns conducted in 2010 and 2011 along the Emeelt fault in the vicinity of Ulaanbaatar, capital of Mongolia, located in an intracontinental region with low deformation rate that induces long recurrence time between large earthquakes. As the geomorphology induced by the fault activity has been highly smoothed by erosion processes since the last event, the fault location and geometry is difficult to determine precisely. However, by using GPR first, a non-destructive and fast investigation, the fault and the sedimentary deposits near the surface can be characterized and the results can be used for the choice of trench location. GPR was performed with a 50 MHz antenna over 2-D lines and with a 500 MHz antenna for pseudo-3-D surveys. The 500 MHz GPR profiles show a good consistency with the trench observations, dug next to the pseudo-3-D surveys. The 3-D 500 MHz GPR imaging of a palaeochannel crossed by the fault allowed us to estimate its lateral displacement to be about 2 m. This is consistent with a right lateral strike-slip displacement induced by an earthquake around magnitude 7 or several around magnitude 6. The 2-D 50 MHz profiles, recorded perpendicular to the fault, show a strong reflection dipping to the NE, which corresponds to the fault plane. Those profiles provided complementary information on the fault such as its location at shallow depth, its dip angle (from 23 • to 35 •) and define its lateral extension. Central Asia is known for its high level of seismic hazards, especially Mongolia, which has been one of the most seismically active intracontinental regions in the world with four large earthquakes (magnitude around 8) along its active faults in the western part of the country during the last century (Khilko et al. 1985). The deformation in Mongolia is located between compressive structures related to the collision and penetration of the Indian plate into the Eurasian plate and extensive structures in the north of the country related with the Baykal rift (Tapponnier & Molnar 1979; Baljinnyam et al. 1993; Schlupp 1996; Bayasgalan & Jackson 1999). The seismic activity observed in the vicinity of Ulaanbaatar (UB), capital of Mongolia, is relatively low compared to the activity observed in western Mongolia. Nevertheless, since 2005, the seismic activity around UB not only has increased, but is also organized (see Fig. 1) at the west of UB along two perpendicular directions, which determine two active faults: Emeelt fault, discovered in 2008 (NNW-SSE direction, 25-km-long minimum and situated about 10 km W of UB) and Hustai fault (WSW–ENE direction, 80 km long, with its NE tip at less than 20 km west of UB); their length and morphology indicate that they can produce earthquakes of magnitude 6.5–7.5 (Schlupp et al. 2012). Most of the Mongolian population (1.2 million over 3 million) is concentrated at UB, which is the main political and economical centre of the country. Hence, the study of seismic hazard and the estimation of the probability of future destructive earthquakes are of primary importance for the country (Dugarmaa et al. 2006). Since the last large earthquake, the faults geomorphology has been highly smoothed by erosional processes and the exact location of the fault plane surface rupture is thus hidden within a several metre wide strip. The GPR method has been proven to give good and useful results to characterize faults by identifying offsets of radar reflections (Malik et al. 2007; Christie et al. 2009; Yalçiner et al. 2013) and
ISSN: 0956-540X

hal-01342629
https://hal.archives-ouvertes.fr/hal-01342629
https://hal.archives-ouvertes.fr/hal-01342629/document
https://hal.archives-ouvertes.fr/hal-01342629/file/Dujardin_Bano_etal_Geoph.%20J.%20Int._2014_final.pdf
DOI : 10.1093/gji/ggu130

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
Nowadays, technological advances in satellite imagery measurements as well as the development of dense geodetic and seismologic networks allow for a detailed analysis of surface deformation associated with active fault seismic cycle. However, the study of earthquake dynamics faces several limiting factors related to the difficulty to access the deep source of earthquake and to integrate the characteristic time scales of deformation processes that extend from seconds to thousands of years. To overcome part of these limitations and better constrain the role and couplings between kinematic and mechanical parameters, we have developed a new experimental approach allowing for the simulation of strike-slip fault earthquakes and analyze in detail hundreds of successive seismic cycle. Model rheology is made of multilayered visco-elasto-plastic analog materials to account for the mechanical behavior of the upper and lower crust and to allow simulating brittle/ductile coupling, postseismic deformation phase and far-field stress transfers. The kinematic evolution of the model surface is monitored using an optical system, based on subpixel spectral correlation of high-resolution digital images. First, results show that the model succeed in reproducing the deformation mechanisms and surface kinematics associated to the main phases of the seismic cycle indicating that model scaling is satisfactory. These results are comforted by using numerical algorithms to study the strain and stress distribution at the surface and at depth, along the fault plane. Our analog modeling approach appears, then, as an efficient complementary approach to investigate earthquake dynamics.
ISSN: 0278-7407

hal-01174176
https://hal.archives-ouvertes.fr/hal-01174176
DOI : 10.1002/2014TC003701

Éditeur(s) : Université des Antilles Études caribéennes
Résumé : Le violent séisme qui a secoué Haïti et sa capitale le 12 janvier 2010 dernier a laissé des séquelles au sein de la population haïtienne déjà fragilisée par la violence, la pauvreté et aussi par des catastrophes naturelles répétées (ouragans, inondations, érosion, etc.). Ce séisme, aussi prévisible qu’il soit, est une catastrophe naturelle et humanitaire sans précédent dont les principales causes sont l’absence de constructions et d’infrastructures solides, bâties selon les normes parasismiques, l’occupation anarchique de l’espace urbain par les populations et les nombreuses irrégularités incontestées observées dans le domaine de l’urbanisme. En outre, ce séisme s’est produit à un moment où l’on commençait à observer dans le pays un élan de stabilisation sur le plan politique, un mouvement de croissance économique ainsi qu’un début d’amélioration des conditions de vie des populations. La catastrophe est venue freiner cette dynamique socioéconomique tout en amplifiant les problèmes existants et en engendrant d’autres difficultés et d’autres défis. Cet article analyse, à travers des témoignages de première main et un état des lieux, les différents impacts de cette catastrophe sur la population locale ainsi que les interrogations et les incertitudes diverses de cette population concernant son avenir.
On January the twelfth 2010, Haiti and its capital have been devastated by a very strong earthquake that has provoked many aftereffects among the local population since that population had already been weakened before by street violence, poverty and by frequent natural disasters such as hurricanes, floods... That earthquake, even foreseeable, has given way to an important disaster whose causes are the absence of well built infrastructures and buildings, the anarchic use of urban spaces by the population, and multiple irregularities in town planning issues. Furthermore, that earthquake took place in a moment when that population was on its way of improvement politically, socially and economically. The disaster has stopped that dynamic, intensifying the existing problems and challenges, and creating new ones. This article analyze – through first hand testimonies, statements and observations – the impacts of such a disaster on the local population as well as diverse inquiries and doubts of that population on its future.
Haïti

Droits : info:eu-repo/semantics/openAccess
urn:doi:10.4000/etudescaribeennes.4842
http://journals.openedition.org/etudescaribeennes/4842

Éditeur(s) : HAL CCSD
Résumé : 38 pages
Rapport
The Chicxulub impact crater, México, is unique. It is the only known terrestrial impact structure that has been directly linked to a mass extinction event and the only terrestrial impact with a global ejecta layer. Of the three largest impact structures on Earth, Chicxulub is the best preserved. Chicxulub is also the only known terrestrial impact structure with an intact, unequivocal topographic peak ring. Chicxulub’s role in the Cretaceous/Paleogene (K-Pg) mass extinction and its exceptional state of preservation make it an important natural laboratory for the study of both large impact crater formation on Earth and other planets and the effects of large impacts on the Earth’s environment and ecology. Our understanding of the impact process is far from complete, and despite more than 30 years of intense debate, we are still striving to answer the question as to why this impact was so catastrophic.During International Ocean Discovery Program (IODP) Expedition 364, Paleogene sediments and lithologies that make up the Chicxulub peak ring were cored to investigate (1) the nature and formational mechanism of peak rings, (2) how rocks are weakened during large impacts, (3) the nature and extent of post-impact hydrothermal circulation, (4) the deep biosphere and habitability of the peak ring, and (5) the recovery of life in a sterile zone. Other key targets included sampling the transition through a rare midlatitude section that might include Eocene and Paleocene hyperthermals and/or the Paleocene/Eocene Thermal Maximum (PETM); the composition and character of the impact breccias, melt rocks, and peak-ring rocks; the sedimentology and stratigraphy of the Paleocene–Eocene Chicxulub impact basin infill; the chronology of the peak-ring rocks; and any observations from the core that may help us constrain the volume of dust and climatically active gases released into the stratosphere by this impact. Petrophysical property measurements on the core and wireline logs acquired during Expedition 364 will be used to calibrate geophysical models, including seismic reflection and potential field data, and the integration of all the data will calibrate impact crater models for crater formation and environmental effects. The proposed drilling directly contributes to IODP Science Plan goals:Climate and Ocean Change: How resilient is the ocean to chemical perturbations? The Chicxulub impact represents an external forcing event that caused a 75% level mass extinction. The impact basin may also record key hyperthermals within the Paleogene.Biosphere Frontiers: What are the origin, composition, and global significance of subseafloor communities? What are the limits of life in the subseafloor? How sensitive are ecosystems and biodiversity to environmental change? Impact craters can create habitats for subsurface life, and Chicxulub may provide information on potential habitats for life, including extremophiles, on the early Earth and other planetary bodies. Paleontological and geochemical studies at ground zero will document how large impacts affect ecosystems and effects on biodiversity.Earth Connections/Earth in Motion: What are the composition, structure and dynamics of Earth’s upper mantle? What mechanisms control the occurrence of destructive earthquakes, landslides, and tsunami? Mantle uplift in response to impacts provides insight into dynamics that differ between Earth and other rocky planets. Impacts generate earthquakes, landslides, and tsunami, and scales that generally exceed plate tectonic processes yield insight into effects, the geologic record, and potential hazards.IODP Expedition 364 was a Mission Specific Platform expedition to obtain subseabed samples and downhole logging measurements from the sedimentary cover sequence and peak ring of the Chicxulub impact crater. A single borehole was drilled into the Chicxulub impact crater on the Yucatán continental shelf, recovering core from 505.7 to 1334.73 m below seafloor with ~99% core recovery and acquiring downhole logs for the entire depth.
International Ocean Discovery Program

hal-01639520
https://hal.archives-ouvertes.fr/hal-01639520
DOI : 10.14379/iodp.pr.364.2017

Éditeur(s) : HAL CCSD
Résumé : International audience
Extreme rainfall events can trigger numerous landslides in mountainous areas and a prolonged increase of river sediment load. The resulting mass transfer at the Earth surface in turn induces stress changes at depth, which could be sufficient to trigger shallow earthquakes. The 2009 Morakot typhoon represents a good case study as it delivered 3 m of precipitation in 3 days and caused some of the most intense erosion ever recorded. Analysis of seismicity time-series before and after the Morakot typhoon reveals a systematic increase of shallow (i.e. 0-15 km of depth) earthquake frequency in the vicinity of the areas displaying a high spatial density of landslides. This step-like increase in frequency lasts for at least 2-3 years and does not follow an Omori-type aftershock sequence. Rather, it is associated to a step change of the Gutenberg-Richter b-value of the earthquake catalog. Both changes occurred in mountainous areas of southwest Taiwan, where typhoon Morakot caused extensive landsliding. These spatial and temporal correlations strongly suggest a causal relationship between the Morakot-triggered landslides and the increase of earthquake frequency and their associated b-value. We propose that the progressive removal of landslide materials from the steep mountain landscape by river sediment transport acts as an approximately constant increase of the stress rate with respect to pre-typhoon conditions, and that this in turn causes a step-wise increase in earthquake frequency. To test this hypothesis, we investigate the response of a rate-and-state fault to stress changes using a 2-D continuum elasto-dynamic model. Consistent with the results of Ader et al. (2013), our preliminary results show a step-like increase of earthquake frequency in response to a step-like decrease of the fault normal stress. We also investigate the sensitivity of the amplitude and time-scale of the earthquake frequency increase to the amplitude of the normal stress change and to rheological parameters. Our study offers new insights on the potential influence of extreme erosional events on the short-time scale dynamics of faults and earthquakes.
American Geophysical Union Fall Meeting 2016
San Francisco, United States

insu-01416987
https://hal-insu.archives-ouvertes.fr/insu-01416987

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We develop a block model for the Aegean and surrounding areas, constrained by Global Positioning System (GPS), in order to investigate the degree of coupling on the Hellenic subduction interface (i.e., the fraction of the motion across the plate boundary accommodated by elastic strain accumulation). We use previously published models, and seismicity to define the geometry of the interface separating the down-going Nubian slab from the overriding Aegean. This model provides a good fit to the GPS observations; for the ∼200,000 km2 Aegean block the wrms of the residual velocities is 1.4 mm/yr for 80 GPS velocity estimates, approximately the 95% level of the GPS velocity uncertainties. We investigate the degree of coupling on the seismically active plate interface, the Hellenic trench splay fault (believed to be the source of the 365 AD Great Crete Earthquake and Tsunami), and the Kephalonia transform fault by comparing the modeled GPS residual velocity field for a range of coupling values. The GPS observations are almost insensitive to coupling on the Kephalonia transform fault, because of the vertical dip of the fault that creates interseismic deformation only close to the fault where few GPS sites exist. The absence of resolvable shortening of the leading edge of the Aegean Plate precludes coupling of more than 0.2 (20% of the full Nubia-Aegean convergence rate) on the modeled plate interface. Because of the shallow dip of the plate interface and trench splay fault, and high rate of convergence, if these boundaries were fully coupled, high elastic strain rates would be expected to extend well into the overriding Aegean plate. Based on our preferred value for the degree of coupling (0.1), and assuming characteristic earthquake behavior, we estimate a recurrence time for great earthquakes with slip similar to that for the 365 Crete event of 5700-8300 yr, consistent with the absence of subsequent great earthquakes on this segment of the subduction zone.
ISSN: 0012-821X

hal-01053486
https://hal.archives-ouvertes.fr/hal-01053486
DOI : 10.1016/j.epsl.2013.10.018

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
[1] This article presents (U-Th)/He thermochronological data from the Longmen Shan belt, eastern Tibet. Located between the Songpan-Garze terrane and the Yangtze craton, this mountain range is one of the steepest margins of the Tibetan Plateau and an important area for the comprehension of the mechanisms that control the dynamics of such plateau borders in terms of spatial distribution of deformation or timing of topographic building. We describe several age-elevation transects and perform forward modeling of our data to derive quantitative information on the exhumation of the range. A major phase of exhumation started at 8–11 Ma, with an average rate of $0.65 mm a À1. Comparison of zircon and apatite ages indicates that the eastern part of the range may have experienced a significant decrease in exhumation since 2–3 Ma. We use the distribution of finite exhumation across the major faults of the area to quantify their dip-slip throw rate over the last 10 Ma. The Beichuan Fault, which was activated during the 2008 Sichuan earthquake, is the major active structure of the Longmen Shan since the late Miocene, with an average thrusting slip rate between 0.4 and 1 mm a À1. Conversely, over the same time period, only minor dip-slip activity occurred on the Wenchuan Fault Zone. This distribution in space and time of exhumation and deformation is discussed and compared to the different proposed models for the geodynamical evolution of the eastern Tibetan margin. It also provides an important long-term perspective to put in context the destructive 2008 Sichuan earthquake that struck the central Longmen Shan.
ISSN: 0278-7407

hal-01577059
https://hal-amu.archives-ouvertes.fr/hal-01577059
https://hal-amu.archives-ouvertes.fr/hal-01577059/document
https://hal-amu.archives-ouvertes.fr/hal-01577059/file/godard2009late.pdf
DOI : 10.1029/2008TC002407

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We use velocities from 65 continuous stations and 31 survey-mode GPS sites as well as kinematic modeling to investigate present day deformation along the Africa-Iberia plate boundary zone in the western Mediterranean region. The GPS velocity field shows southwestward motion of the central part of the Rif Mountains in northern Morocco with respect to Africa varying between 3.5 and 4.0 mm/yr, consistent with prior published results. Stations in the southwestern part of the Betic Mountains of southern Spain move west-southwest with respect to Eurasia (similar to 2-3 mm/yr). The western component of Betics motion is consistent with partial transfer of Nubia-Eurasia plate motion into the southern Betics. The southward component of Betics motion with respect to Iberia is kinematically consistent with south to southwest motion of the Rif Mountains with respect to Africa. We use block modeling, constrained by mapped surface faults and seismicity to estimate the geometry and rates of strain accumulation on plate boundary structures. Our preferred plate boundary geometry includes one block between Iberia and Africa including the SW Betics, Alboran Sea, and central Rif. This geometry provides a good fit to the observed motions, suggesting a wide transpressive boundary in the westernmost Mediterranean, with deformation mainly accommodated by the Gloria-Azores fault system to the West and the Rif-Tell lineament to the East. Block boundaries encompass aspects of earlier interpretations suggesting three main deformation styles: (i) extension along the NE-SW trending Trans-Alboran shear zone, (ii) dextral strike-slip in the Betics corresponding to a well defined E-W seismic lineament, and (iii) right lateral strike-slip motion extending West to the Azores and right-lateral motion with compression extending East along the Algerian Tell. We interpret differential motion in the Rif-Alboran-Betic system to be driven both by surface processes related the Africa-Eurasia oblique convergence and sub-crustal dynamic processes associated with the long history of subduction of the Neotethys ocean lithosphere. The dextral slip identified in the Betic Mountains in Southern Spain may be related to the offshore fault that produced the Great 1755 Lisbon Earthquake, and as such may represent a significant seismic hazard for the West Mediterranean region.
ISSN: 0012-821X

hal-00618337
https://hal.archives-ouvertes.fr/hal-00618337
DOI : 10.1016/j.epsl.2011.05.048

Éditeur(s) : HAL CCSD
Résumé : International audience
As subducting plates reach the base of the upper mantle, some appear to flatten and stagnate, while others seemingly go through unimpeded. This variable resistance to slab sinking has been proposed to affect long-term thermal and chemical mantle circulation. A review of observational constraints and dynamic models highlights that neither the increase in viscosity between upper and lower mantle (likely by a factor 20–50) nor the coincident endothermic phase transition in the main mantle silicates (with a likely Clapeyron slope of –1 to –2 MPa/K) suffice to stagnate slabs. However, together the two provide enough resistance to temporarily stagnate subducting plates, if they subduct accompanied by significant trench retreat. Older, stronger plates are more capable of inducing trench retreat, explaining why backarc spreading and flat slabs tend to be associated with old-plate subduction. Slab viscosities that are ∼2 orders of magnitude higher than background mantle (effective yield stresses of 100–300 MPa) lead to similar styles of deformation as those revealed by seismic tomography and slab earthquakes. None of the current transition-zone slabs seem to have stagnated there more than 60 m.y. Since modeled slab destabilization takes more than 100 m.y., lower-mantle entry is apparently usually triggered (e.g., by changes in plate buoyancy). Many of the complex morphologies of lower-mantle slabs can be the result of sinking and subsequent deformation of originally stagnated slabs, which can retain flat morphologies in the top of the lower mantle, fold as they sink deeper, and eventually form bulky shapes in the deep mantle.
ISSN: 1553-040X

hal-01571965
https://hal.archives-ouvertes.fr/hal-01571965
DOI : 10.1130/GES01476.1

Éditeur(s) : HAL CCSD Springer
Résumé : Subduction is a major process that plays a first-order role in the dynamics of the Earth. The sinking of cold lithosphere into the mantle is thought by many authors to be the most important source of energy for plates driving forces. It also deeply modifies the thermal and chemical structure of the mantle, producing arc volcanism and is responsible for the release of most of the seismic energy on Earth. There has been considerable achievements done during the past decades regarding the complex interactions between the various processes acting in subduction zones. This volume contains a collection of contributions that were presented in June 2007 in Montpellier (France) during a conference that gave a state of the art panorama and discussed the perspectives about "Subduction Zone Geodynamics". The papers included in this special volume offer a unique multidisciplinary picture of the recent research on subduction zones geodynamics. They are organized into five main topics: Subduction zone geodynamics, Seismic tomography and anisotropy, Great subduction zone earthquakes, Seismogenic zone characterization, Continental and ridge subduction processes. Each of the 13 papers collected in the present volume is primarily concerned with one of these topics. However, it is important to highlight that papers always treat more than one topic so that all are related lighting on different aspects of the complex and fascinating subduction zones geodynamics.
https://hal.archives-ouvertes.fr/hal-00808864

ISBN : 978-3-540-87974
hal-00808864
https://hal.archives-ouvertes.fr/hal-00808864

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
Iran is an active continental domain accommodating the convergence between the Arabia and Eurasia plates. In northwestern Iran, deformation between the Central Iranian block and the Caucasus domain is mainly accommodated by right lateral strike-slip on the Tabriz fault. Cities and villages, including the city of Tabriz, have been destroyed by several strong historical earthquakes (M similar to 7). In this study, we compare the slip-rates estimated from geodetic measurements (radar interferometry and UPS) with those determined by dating a geomorphological offset of an alluvial fan along the Tabriz fault. The GPS measurements along two profiles normal to the Tabriz fault suggest a slip-rate of 7.3 +/- 1.3 mm yr(-1). The persistent scatterer radar interferometry analysis of Envisat satellite archives from 2003 to 2010 shows a velocity gradient (6 +/- 3 mm yr(-1)) across the Tabriz fault in agreement with GPS results. Moreover, it reveals that most of the area located south of the Tabriz fault is affected by subsidence, and that some sections of the fault probably act as barriers to fluid migration which may have an impact on its mechanical behaviour. West of Tabriz morphotectonic investigations on an alluvial fan surface show a right-lateral cumulative offset of 320 +/- 40 m Luminescence analyses of the coarse matrix alluvial fan deposits provide an age of 46 +/- 3 ka. This yields a slip-rate comprised between 6.5 and 7.3 mm yr(-1) along this segment. These results suggest that the Late Quaternary slip-rate is in agreement with the present-day slip-rate estimated by geodetic measurements, showing no slip-rate changes during the past 45 000 yr. Short-term variations within the 45 000 yr related to temporal earthquake clustering over few seismic cycles cannot be ruled out, but if they exist, they do not affect the geodetic and the geomorphological estimates. This study is in agreement with previous ones suggesting that long-term slip-rates (i.e. averaged over several tens of seismic cycles) are consistent with geodetic estimated slip-rates (i.e. extrapolated from few years of interseismic observations), and suggests that perturbations of fault slip-rates are related to variations over few seismic cycles.
ISSN: 0956-540X

hal-00844695
https://hal.archives-ouvertes.fr/hal-00844695
https://hal.archives-ouvertes.fr/hal-00844695v2/document
https://hal.archives-ouvertes.fr/hal-00844695/file/rizza2013.pdf
DOI : 10.1093/gji/ggt041

Éditeur(s) : HAL CCSD Geological Society of America
Résumé : International audience
Fluid-rock interactions can control earthquake nucleation and the evolution of earthquake sequences. Experimental studies of fault frictional properties in the presence of fluid can provide unique insights into these interactions. We report the first results from experiments performed on cohesive silicate-bearing rocks (microgabbro) in the presence of pressurized pore fluids (H2O, drained conditions) at realistic seismic deformation conditions. The experimental data are compared with those recently obtained from carbonate-bearing rocks (Carrara marble). Contrary to theoretical arguments, and consistent with the interpretation of some field observations, we show that frictional melting of a microgabbro develops in the presence of water. In microgabbro, the initial weakening mechanism (flash melting of the asperities) is delayed in the presence of water; conversely, in calcite marble the weakening mechanism (brittle failure of the asperities) is favored. This opposite behavior highlights the importance of host-rock composition in controlling dynamic (frictional) weakening in the presence of water: cohesive carbonate-bearing rocks are more prone to slip in the presence of water, whereas the presence of water might delay or inhibit the rupture nucleation and propagation in cohesive silicate-bearing rocks.
ISSN: 0091-7613

hal-01054327
https://hal.archives-ouvertes.fr/hal-01054327
DOI : 10.1130/G34916.1

Éditeur(s) : Université des Antilles Études caribéennes
Résumé : Cet article souligne la particularité des politiques locales menées récemment en Martinique et en Guadeloupe en matière de gestion du risque sismique. Ces Départements français des Amériques, fortement exposés à la menace sismique, s’impliquent depuis peu dans une véritable dynamique préventive soutenue par l’action des Collectivités. Des stratégies locales de réduction de la vulnérabilité humaine et technique sont expérimentées au bénéfice de la population. Elles viennent renforcer ou compléter les efforts étatiques visant une plus grande implication du citoyen à son information et à sa sécurité face aux séismes.
This article underlines the characteristic of the local policies followed recently in Martinique and Guadeloupe as regards seismic risk management. These French Departments of Americas, strongly exposed to the seismic threat, imply themselves recently in a true preventive dynamics supported by the action of the Communities. Local strategies of reduction of the human and technical vulnerability are tested for the benefit of the population. They come to reinforce or supplement the official efforts of French State aiming a greater implication of the citizen to his information and its safety against the earthquakes.
Guadeloupe
Martinique

Droits : info:eu-repo/semantics/openAccess
urn:doi:10.4000/etudescaribeennes.289
http://journals.openedition.org/etudescaribeennes/289

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
We present Contact Dynamics discrete element simulations of the earthquake-triggered Jiufengershan avalanche, which mobilized a 60 m thick, 1.5 km long sedimentary layer, dipping similar to 22 degrees SE toward a valley. The dynamic behavior of the avalanche is simulated under different assumptions about rock behavior, water table height, and boundary shear strength. Additionally, seismic shaking is introduced using strong motion records from nearby stations. We assume that seismic shaking generates shearing and frictional heating along the surface of rupture, which, in turn, may induce dynamic weakening and avalanche triggering; a simple "slip-weakening'' criterion was adopted to simulate shear strength drop along the rupture surface. We investigate the mechanical processes occurring during triggering and propagation of an avalanche mobilizing shallowly dipping layers. Incipient deformation forms a pop-up structure at the toe of the dip slope. As the avalanche propagates, the pop-up deforms into an overturned fold, which overrides the surface of separation along a decollement. Simultaneously, uphill layers slide at high velocity (125 km/h) and are folded and disrupted as they reach the toe of the dip slope. The avalanche foot forms a wedge that is pushed forward as deformed rocks accrete at its rear. We simulated five cross sections across the Jiufengershan avalanche, which differ in the geometry of the surface of separation. Topographic and simulated surface profiles are similar. The friction coefficient at the surface of separation determined from back analysis is abnormally low (mu(SS) = 0.2), possibly due to lubrication by liquefied soils. The granular deposits of simulated earthquake- and rain-triggered avalanches are similar.
ISSN: 0148-0227

hal-00420882
https://hal.archives-ouvertes.fr/hal-00420882
DOI : 10.1029/2008JF001075