Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Chenaillet Ophiolite in the Franco-Italian Alps represents a well-exposed ocean-floor sequence that was only weakly overprinted by Alpine metamorphism during its emplacement in the Alpine nappe stack. Pillow lavas showing a Mid Ocean Ridge Basalt (MORB) signature overlie tectonically exhumed gabbros and serpentinized mantle rocks similar to oceanic core complexes (OCC) described from present-day slow- to ultraslow-spreading ridges. Based on detailed mapping it can be shown that: 1) syn-magmatic high-temperature shear zones are truncated by oceanic detachment faults; 2) sediments consisting exclusively of clasts derived from the footwall of the detachment are overlain by voluminous lavas, and 3) emplacement of lavas is linked with high-angle faulting that overprint the oceanic detachment fault. Based on stratigraphic and cross cutting relationships we conclude that: 1) a complex relation between high- and low-temperature shear zones exists, 2) oceanic detachment faults may be obliterated by later emplaced of MOR basalts, and 3) high-angle faults may serve at shallow levels as feeder channels for the overlying pillow basalts. These observations raise questions about the relative relations in time and space between magmatic, hydrothermal and tectonic processes at spreading systems. We propose that the observed change from exhumation along an oceanic detachment fault to high-angle faulting associated with extrusion of volcanic rocks may represent an evolution within a life cycle of a spreading system that may be comparable to present-day slow- to ultraslow-spreading ridges.
ISSN: 0024-4937

hal-00617678
https://hal.archives-ouvertes.fr/hal-00617678
DOI : 10.1016/j.lithos.2010.10.017

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : Vertical displacements on the SW-NE T (e) over capt fault (Eastern Pyrenees Axial Zone, France), which separates the Variscan Canigou-Caranca and Mont-Louis massifs, were constrained using a thermochronologic multi-method approach. Ar-40/Ar-39 data from the granitic Mont-Louis massif record its Variscan cooling history and reveal no ages younger than Early Cretaceous, while the Canigou-Caranca gneiss massif records systematically younger Ar-40/Ar-39 ages. These younger Ar-40/Ar-39 ages in the Canigou-Caranca gneiss massif are the result of partial to total rejuvenation of argon isotopic systems related to a thermal flow coeval with the Cretaceous HT-BP metamorphism in the North Pyrenean Zone. Only the deepest rocks from the Canigou-Caranca suffered this extensive Mid-Cretaceous thermal overprint probably due to differential burial around 4 km at that time. The post Mid-Cretaceous vertical displacements along the T (e) over capt fault are recorded by "low" temperature thermochronology using K-feldspar Ar-40/Ar-39, zircon and apatite fission track and (U-Th)/He datings. The Mont-Louis granite samples experienced a long period of protracted cooling reflecting a lack of thermo-tectonic activity in this area from Late Palaeozoic to Early Cenozoic, followed by cooling from 55-60 Ma to Late Eocene at a mean rate of 15-20 degrees C/Ma in the final stage. This cooling stage corresponds to T (e) over capt fault reactivation with a reversed component, promoting exhumation of the Mont-Louis roof zone contemporaneously with the south-vergent Pyrenean thrusting. In the Canigou-Caranca massif, the main cooling event occurred from 32 to 18 Ma at a maximum rate of 30 degrees C/Ma during Early Oligocene followed by a more moderate rate of 3 degrees C/Ma from Late Oligocene to Early Burdigalian, coeval with the normal reactivation of the T (e) over capt fault in brittle conditions that accommodated the final exhumation of the massif during the opening of the Gulf of Lion.
ISSN: 1437-3254

hal-00411442
https://hal.archives-ouvertes.fr/hal-00411442
DOI : 10.1007/s00531-007-0179-x

Éditeur(s) : HAL CCSD MAIK Nauka/Interperiodica
Résumé : International audience
The paper is concerned with the kinematics of the major faults, their pattern, and the time of occurrence of compression and extension deformations in the southeast of the Eastern Sayan. The geometry of the mountain ranges and the kinematics of the major faults exhibit northeast-oriented compression responsible for the current processes of relief formation, which corresponds to the direction of the vector of deformations associated with the Indo-Asian collision. The results obtained thus far may be indicative of the remote influence of collision on the orogenic activity and transpressional deformations in the Eastern Sayan since the end of the Miocene. Morphotectonic analysis has shown that the areas of Quaternary extension- related deformations in the Eastern Sayan are not a response to active rifting in the Baikal Rift Zone. The position and geometry of the subsided blocks and magma ruptures point to the fact that they form locally as extension structural elements near the strike-slip faults. The strike-slip and thrust faults are widespread and play the leading role in the development of the southeastern part of the Eastern Sayan.
ISSN: 0016-8521

insu-00667345
https://hal-insu.archives-ouvertes.fr/insu-00667345
DOI : 10.1134/S001685211101002X

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We use velocities from 65 continuous stations and 31 survey-mode GPS sites as well as kinematic modeling to investigate present day deformation along the Africa-Iberia plate boundary zone in the western Mediterranean region. The GPS velocity field shows southwestward motion of the central part of the Rif Mountains in northern Morocco with respect to Africa varying between 3.5 and 4.0 mm/yr, consistent with prior published results. Stations in the southwestern part of the Betic Mountains of southern Spain move west-southwest with respect to Eurasia (similar to 2-3 mm/yr). The western component of Betics motion is consistent with partial transfer of Nubia-Eurasia plate motion into the southern Betics. The southward component of Betics motion with respect to Iberia is kinematically consistent with south to southwest motion of the Rif Mountains with respect to Africa. We use block modeling, constrained by mapped surface faults and seismicity to estimate the geometry and rates of strain accumulation on plate boundary structures. Our preferred plate boundary geometry includes one block between Iberia and Africa including the SW Betics, Alboran Sea, and central Rif. This geometry provides a good fit to the observed motions, suggesting a wide transpressive boundary in the westernmost Mediterranean, with deformation mainly accommodated by the Gloria-Azores fault system to the West and the Rif-Tell lineament to the East. Block boundaries encompass aspects of earlier interpretations suggesting three main deformation styles: (i) extension along the NE-SW trending Trans-Alboran shear zone, (ii) dextral strike-slip in the Betics corresponding to a well defined E-W seismic lineament, and (iii) right lateral strike-slip motion extending West to the Azores and right-lateral motion with compression extending East along the Algerian Tell. We interpret differential motion in the Rif-Alboran-Betic system to be driven both by surface processes related the Africa-Eurasia oblique convergence and sub-crustal dynamic processes associated with the long history of subduction of the Neotethys ocean lithosphere. The dextral slip identified in the Betic Mountains in Southern Spain may be related to the offshore fault that produced the Great 1755 Lisbon Earthquake, and as such may represent a significant seismic hazard for the West Mediterranean region.
ISSN: 0012-821X

hal-00618337
https://hal.archives-ouvertes.fr/hal-00618337
DOI : 10.1016/j.epsl.2011.05.048

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
The Ryukyu subduction is known to generate very few earthquakes in its central segment contrarily to its two extremities. We focus in this study on the southernmost part of the Ryukyu subduction zone offshore east Taiwan. Our first task was to build a homogeneous earthquake catalogue for the period 1900–2007. The new catalogue provides homogenized M′W magnitudes and shows that several M′W≥ 7.0 earthquakes occurred offshore Hualien and Suao cities. We then focused on the 1920 June 5 earthquake (reported surface wave magnitude 8.1) previously located beneath the accretionary prism. The revised moment magnitude has been estimated in our catalogue at 7.7 ± 0.2. It is the biggest earthquake ever recorded in the Taiwan area but the fault that has produced this earthquake has not yet been identified with confidence. We relocated this event using regional phases (seismological bulletins archived at the Central Weather Bureau of Taiwan) about 50 km NNE and shallower of its former location, that is, within the Ryukyu Arc basement. According to earthquake bulletin information, revised magnitude, new hypocentral determination and known regional faults, we propose four potential active faults as candidates for the slip associated to this event: (1) the interplate seismogenic zone (ISZ), (2) an out-of-sequence thrust cutting through the forearc and branching on the ISZ, (3) a NS strike-slip fault cutting through the Ryukyu arc and (4) a N–S, westward dipping thrust fault, affecting the Philippine Sea Plate east of the Luzon Arc. The best compromise is to consider a rupture along the ISZ with a shallow nucleation possibly along a splay-fault followed by a downward and lateral propagation of the rupture that would explain the lack of significant seafloor motion and subsequent tsunami. We also estimate the maximum seismic coupling of the ISZ in the region east of Taiwan to about 0.4. In parallel, the evidences of aseismic slip occurring along the ISZ allow us to conclude that this region should only be affected by M < 8 earthquakes.
ISSN: 0956-540X

hal-00545459
https://hal.archives-ouvertes.fr/hal-00545459
https://hal.archives-ouvertes.fr/hal-00545459/document
https://hal.archives-ouvertes.fr/hal-00545459/file/theunisseGJI2010.pdf
DOI : 10.1111/j.1365-246X.2010.04813.x

Éditeur(s) : Gauthier-Villars
Résumé : During Leg 66 eight sites were drilled to form a transect across the Middle America Trench off southwestern Mexico. Cores from these sites show that accretion began approximately 10 MY ago and has continued to the present. Accretion began with offscraping followed by a 2- to 4- MY episode of folding and faulting with uplift rates of 400-500 m/MY; uplift then slowed to 100-200 m/MY, and seismically resolved deformation ceased as the wedge appeared to rise evenly. Approximately 33% of the sediment flux input into the subduction zone, mainly trench sand and slump deposits, is scraped off and incorporated into the toe of the lower slope; an additional 33% is initially subducted but then peeled off to underplate the accretionary wedge; the remaining 33% is subducted landward beneath the overhanging lip of continental crust. Although we find no direct evidence of tectonic erosion, the large amount of sediment subducted makes tectonic erosion feasible.
Oceanologica Acta, Special issue (0399-1784) (Gauthier-Villars), 1981

Droits : info:eu-repo/semantics/openAccess
http://archimer.ifremer.fr/doc/00245/35668/34176.pdf
http://archimer.ifremer.fr/doc/00245/35668/

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
I use GPS interseismic velocities and classic 2D elastic half-space models with a screw dislocation to estimate the long-term fault slip rate, locking depth, and the offset between the surface fault trace and the location of the dislocation below the seismogenic zone for 13 segments along 8 major strike-slip faults. Using deduced strike-slip rates and the position of the dislocation to normalize the interseismic velocities to facilitate comparison of spatial patterns of deformation, I show that no substantial differences can be detected, ruling out a large asymmetry in interseismic velocities across the 8 faults used in this study. Only the Carrizo Plain segment of the San Andreas Fault shows a significant asymmetry that cannot be explained by shifting the position of the dislocation at depth relative to the fault trace. However, the resulting perturbation is less than 10% of total strike-slip rate. Fault traces are usually curved, defining a concave side. When the dislocation at depth is significantly offset from the fault trace, the shift is always toward the block on the concave side of the fault trace. This suggests that the fault zone in the lower crust may develop a simpler geometry more consistent with relative motion across the fault than its upper seismogenic part constrained by the structural complexity of the brittle crust. Since the faults used in this study are at different times in their interseismic period, comparing the interseismic velocity fields across them allows identification of possible variations of the interseismic velocities with time. When normalized by slip rate and dislocation location, all the faults show the same interseismic strain with no significant differences between deduced locking depths. These comparisons suggest that if temporal variations occur as suggested by some dynamic earthquake cycle models, they are small and below the accuracy of the available geodetic measurements.
ISSN: 0040-1951

hal-01171753
https://hal.archives-ouvertes.fr/hal-01171753
DOI : 10.1016/j.tecto.2015.01.013

Éditeur(s) : HAL CCSD
Résumé : In SW Yukon – SE Alaska, the boundary between the Pacific and North America plates is characterized by a syntaxis at the transition between the Aleutian subduction to the W and the Fairweather – Queen Charlotte strike-slip faults to the SE. The relative motion is oblique to the main fault structures, and the area is marked by the Yakutat block collision. From the Chugach – Saint Elias mountains in the plate boundary zone (up to 6 000 m high) to the intraplate strike-slip faults, markers of the present-day deformation give information on its partition in the system.During my PhD, I first measure surface deformation using a dense GPS network, deployed up to 500 km inland the North America plate. After precise processing and corrections of transient effects in the area (postseismic and glacial isostatic rebound), a new residual velocity field is produced for the syntaxis area, from which I derive strain rates. Those data allow me to quantify the fault slip rates for Fairweather and southern Denali strike-slip faults, and to characterize a bi-modal deformation pattern: Along the plate boundary, the deformation is localized on large-scale structures (accretionary prism to the W, Fairweather to the E); In the syntaxis area, strain rates are the highest and the GPS data shows a diffuse intraplate deformation, similar to an indentor pattern. The Yakutat block seems to strongly drive the North America plate deformation.This indentor pattern induces strong lateral variations on the large intraplate faults: the Denali – Totschunda – Duke River system. In a second part, I realize a regional geomorphological study to characterize the role and slip rate of those faults. From very high-resolution Digital Elevation Models (~ 1 m), a detailed cartography is done. On the basis of fieldwork observations, I measure offsets of fluvial and glacial markers, which are sampled for dating. A dextral cumulative deformation is highlighted on the northern Denali Fault, where as all southern Denali is marked by vertical deformation. This study allows me to quantify new slip rates for the system Denali – Totschunda – Duke River, and to show the leading role of the Totschunda (~ 14 mm/a) and Duke River (~ 6 mm/a) faults, contrary to the Denali Fault (~ 1 mm/a) North of the syntaxis.The new tectonic model for the Yakutat collision provides an important case study for the understanding of indentor systems. The concomitance of a rigid-block deformation (to the West) and diffuse deformation (to the East), as well as the near-zero slip rate on the lithospheric-scale southern Denali Fault highlight the major control of boundary conditions and the structural heritage on the orogen deformation.
Au SO Yukon – SE Alaska, la frontière entre les plaques Pacifique et Nord-Amérique est marquée par une syntaxe à la transition entre la subduction des Aléoutiennes à l’O et le décrochement de Fairweather – Queen Charlotte au SE. Le mouvement relatif est oblique et la région est marquée par la collision du bloc Yakutat. De la chaine des Chugach – Saint Elias en frontière de plaque (jusqu’à 6 000 m d’altitude) aux grands décrochements intraplaque, les marqueurs de la déformation actuelle apportent des informations sur sa partition dans ce système.Au cours de cette thèse, je m’intéresse dans un premier temps à mesurer la déformation de surface à l’aide d’un réseau GPS dense, déployé jusqu’à 500 km à l’intérieur de la plaque Nord-Amérique. Après un travail minutieux de traitement des données et de correction des effets transitoires (rebond post-glaciaire et post-sismique), un champ de vitesses résiduelles robuste et inédit est produit au niveau de la syntaxe, dont je dérive des taux de déformation. Ces données me permettent de quantifier les vitesses de glissement les failles décrochantes de Fairweather et Denali au Sud, et également de caractériser une déformation bimodale : En frontière de plaques, la déformation est localisée sur les grandes structures (prisme d’accrétion à l’O, Fairweather à l’E) ; Au niveau de la syntaxe, les taux de déformation sont les plus importants et les données GPS mettent en évidence une déformation intraplaque diffuse, similaire à un champ attendu à l’aplomb d’un indenteur. Le bloc Yakutat semble donc contrôler fortement la déformation de la plaque Nord-Amérique.Ce champ de déformation induit des variations latérales fortes sur les grandes failles intraplaque : le système Denali-Totschunda-Duke River. Dans une seconde partie, je réalise une étude géomorphologique régionale pour caractériser le rôle et la vitesse de ces failles. À partir de Modèles Numériques de Terrain très haute résolution (~ 1 m), une cartographie de détail est réalisée. Puis une mission de terrain me permet de mesurer des décalages sur des marqueurs fluviatiles et glaciaires et collecter des échantillons pour les dater. Je mets en évidence une déformation cumulée dextre sur le segment Nord de la faille de Denali, alors que toute la partie Sud déforme verticalement la surface. Cette étude me permet de quantifier de nouvelles vitesses de failles sur le système Denali-Totschunda-Duke River, et de montrer le rôle prépondérant des failles de Totschunda (~ 14 mm/a) et Duke River (~ 6 mm/a) contrairement à la faille de Denali (~ 1 mm/a) au Nord de la syntaxe.Le nouveau modèle cinématique proposé pour la région de collision Yakutat permet d’apporter un nouvel exemple à la compréhension des systèmes d’indenteur. La concomitance d’une déformation de blocs (à l’Ouest) et diffuse (à l’Est), ainsi que l’absence de déformation sur la faille lithosphérique de Denali Sud met en évidence le contrôle majeur des conditions aux limites et de l’héritage structural dans la déformation des orogènes.
https://hal.archives-ouvertes.fr/tel-01241688

tel-01241688
https://hal.archives-ouvertes.fr/tel-01241688
https://hal.archives-ouvertes.fr/tel-01241688/document
https://hal.archives-ouvertes.fr/tel-01241688/file/manuscrit_anais_v2_optimise.pdf

Éditeur(s) : Wiley / Blackwell
Résumé : For the first time, a deep seismic data set acquired in the frame of the Algerian-French SPIRAL program provides new insights regarding the origin of the westernmost Algerian margin and basin. We performed a tomographic inversion of traveltimes along a 100-km-long wide-angle seismic profile shot over 40 ocean bottom seismometers offshore Mostaganem (Northwestern Algeria). The resulting velocity model and multichannel seismic reflection profiles show a thin (3-4 km thick) oceanic crust. The narrow ocean-continent transition (less than 10 km wide) is bounded by vertical faults and surmounted by a narrow almost continuous basin filled with Miocene to Quaternary sediments. This fault system, as well as the faults organized in a negative-flower structure on the continent side, marks a major strike-slip fault system. The extremely sharp variation of the Moho depth (up to 45 +/- 3 degrees) beneath the continental border underscores the absence of continental extension in this area. All these features support the hypothesis that this part of the margin from Oran to Tenes, trending N65-N70 degrees E, is a fossil subduction-transform edge propagator fault, vestige of the propagation of the edge of the Gibraltar subduction zone during the westward migration of the Alboran domain.
Geophysical Journal International (0956-540X) (Wiley / Blackwell), 2015-02 , Vol. 200 , N. 2 , P. 1027-1043

Droits : The Authors 2014. Published by Oxford University Press on behalf of The Royal Astronomical Society
http://archimer.ifremer.fr/doc/00255/36670/35278.pdf
http://archimer.ifremer.fr/doc/00255/36670/35279.pdf
DOI:10.1093/gji/ggu454
http://archimer.ifremer.fr/doc/00255/36670/

Éditeur(s) : HAL CCSD Geological Society of America
Résumé : International audience
The activity of subhorizontal decollements mapped by geologists in extensional provinces is not explained by rock mechanics principles, which predict that only steep faults can slip. These exposed decollements are therefore suspected to be inactive; they may correspond to rotated, formerly active, high-angle faults. However, growing seismological evidence of earthquakes with low-angle fault-plane mechanisms has forced us to revisit this viewpoint. Using the example of the Gulf of Corinth in Greece, we propose a mechanical model that explains how a weak, high-angle fault may form a low-angle decollement at depth. This decollement is uplifted in a second stage of extension, which allows the exhumation of a metamorphic core complex such as the northern Snake Range, Nevada.
ISSN: 0091-7613

hal-01419920
https://hal.archives-ouvertes.fr/hal-01419920
DOI : 10.1130/0091-7613(2001)029<0439:CCMFTG>2.0

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
The ENE-WSW Autun Shear Zone in the northeastern part of the French Massif Central has been interpreted previously as a dextral wrench fault. New field observations and microstructural analyses document a NE-SW stretching lineation that indicates normal dextral motions along this shear zone. Further east, similar structures are observed along the La Serre Shear Zone. In both areas, a strain gradient from leucogranites with a weak preferred orientation to highly sheared mylonites supports a continuous Autun-La Serre fault system. Microstructural observations, and shape and lattice-preferred orientation document high-temperature deformation and magmatic fabrics in the Autun and La Serre granites, whereas low- to intermediate-temperature fabrics characterize the mylonitic granite. Electron microprobe monazite geochronology of the Autun and La Serre granites yields a ca. 320 Ma age for pluton emplacement, while mica 40Ar-39Ar datings of the Autun granite yield plateau ages from 305 to 300 Ma. The ca. 300 Ma 40Ar-39Ar ages, obtained on micas from Autun and La Serre mylonites, indicate the time of the mylonitization. The ca. 15-Ma time gap between pluton emplacement and deformation along the Autun-La Serre fault system argue against a synkinematic pluton emplacement during late orogenic to postorogenic extension of the Variscan Belt. A ductile to brittle continuum of deformation is observed along the shear zone, with Lower Permian brittle faults controlling the development of sedimentary basins. These results suggest a two-stage Late Carboniferous extension in the northeastern French Massif Central, with regional crustal melting and emplacement of the Autun and La Serre leucogranites around 320 Ma, followed, at 305-295 Ma, by ductile shearing, normal brittle faulting, and subsequent exhumation along the Autun-La Serre transtensional fault system.
ISSN: 1437-3254

insu-00596918
https://hal-insu.archives-ouvertes.fr/insu-00596918
https://hal-insu.archives-ouvertes.fr/insu-00596918/document
https://hal-insu.archives-ouvertes.fr/insu-00596918/file/Article_Morvan_v_INIST.pdf
DOI : 10.1007/s00531-011-0673-z

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We conducted a laser-equipped analog experiment aimed at quasi-continuously monitoring the growth of a dense population of normal faults in homogeneous conditions. To further understand the way geological faults progressively gain in slip and length as they accumulate more strain, we measured with great precision the incremental slip and length changes that the analog faults sustain as they grow. These measurements show that the analog faults share common features with the natural ones. In particular, during their growth, the faults develop and maintain cumulative slip profiles that are generally triangular and asymmetric. The growth takes place through two distinct phases: an initial, short period of rapid lateral lengthening, followed by a longer phase of slip accumulation with little or no lengthening. The incremental slip is found to be highly variable in both space (along the faults) and time, resulting in variable slip rates. In particular, ‘short- and long-term' slip rates are markedly different. We also find that slip measurements at local points on fault traces do not contain clear information on the slip increment repeat mode. Finally, while the fault growth process is highly heterogeneous when considered at the scale of a few slip events, it appears homogeneous and self-similar at longer time scales which integrate many slip increments. This is likely to be the result of a feedback between stress heterogeneities and slip development. The long-term scale homogeneity also implies that the long-term faulting process is primarily insensitive to the short-term heterogeneities that are rapidly smoothed or redistributed. We propose a new conceptual scenario of fault growth that integrates the above observations and we suggest that faults grow in a bimodal way as a result of a self-driven and self-sustaining process.
ISSN: 0012-821X

Droits : info:eu-repo/semantics/OpenAccess
insu-00351998
https://hal-insu.archives-ouvertes.fr/insu-00351998
https://hal-insu.archives-ouvertes.fr/insu-00351998/document
https://hal-insu.archives-ouvertes.fr/insu-00351998/file/SchlagenhaufEtAl2008_EPSL_author.pdf
DOI : 10.1016/j.epsl.2008.06.042

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Wallace (1951) and Bott (1959) were the first to introduce the idea that the slip on each fault surface has the same direction and sense as the maximum shear stress resolved on that surface. However, this simplified hypothesis is questionable since fault mechanical interactions may induce slip reorientations. Earlier numerical geomechanical models confirmed that the slickenlines (slip vectors) are not necessarily parallel to the maximum resolved shear stress but are consistent with local stress perturbations. This leads us to ask as to what extent the Wallace and Bott simplifications are reliable as a basis hypothesis for stress inversion from fault slip data. Here, a geomechanical multi-parametric study using a 3D boundary element method, covering (i) fault geometries such as intersected faults or corrugated fault surfaces, (ii) the full range of Andersonian state of stress, (iii) fault friction, (iv) fault fluid pressure, (v) half space effect and (vi), rock properties, is performed in order to understand the effect of each parameter on the misfit angle between geomechanical slip vectors and the resolved shear stresses. It is shown that significant misfit angles can be found under specific configurations invalidating the Wallace and Bott assumptions, even though fault friction tends to minimize the misfit. We therefore conclude that in such cases, stress inversions based on fault slip data should be interpreted with care.
ISSN: 0040-1951

hal-01218418
https://hal.archives-ouvertes.fr/hal-01218418
DOI : 10.1016/j.tecto.2015.06.030

Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
Rainbow is a dome-shaped massif at the 36°14′N nontransform offset along the Mid-Atlantic Ridge. It hosts three ultramafic-hosted hydrothermal sites: Rainbow is active and high temperature; Clamstone and Ghost City are fossil and low temperature. The MoMARDREAM cruises (2007, 2008) presented here provided extensive rock sampling throughout the massif that constrains the geological setting of hydrothermal activity. The lithology is heterogeneous with abundant serpentinites surrounding gabbros, troctolites, chromitites, plagiogranites, and basalts. We propose that a W dipping detachment fault, now inactive, uplifted the massif and exhumed these deep-seated rocks. Present-day deformation is accommodated by SSW-NNE faults and fissures, consistent with oblique teleseismic focal mechanisms and stress rotation across the discontinuity. Faults localize fluid flow and control the location of fossil and active hydrothermal fields that appear to be ephemeral and lacking in spatiotemporal progression. Markers of high-temperature hydrothermal activity (∼350°C) are restricted to some samples from the active field while a more diffuse, lower temperature hydrothermal activity (<220°C) is inferred at various locations through anomalously high As, Sb, and Pb contents, attributed to element incorporation in serpentines or microscale-sulfide precipitation. Petrographic and geochemical analyses show that the dominant basement alteration is pervasive peridotite serpentinization at ∼160–260°C, attributed to fluids chemically similar to those venting at Rainbow, and controlled by concomitant alteration of mafic-ultramafic units at depth. Rainbow provides a model for fluid circulation, possibly applicable to hydrothermalism at oceanic detachments elsewhere, where both low-temperature serpentinization and magmatic-driven high-temperature outflow develop contemporaneously, channeled by faults in the footwall and not along the detachment fault.
ISSN: 1525-2027

hal-01115281
https://hal.archives-ouvertes.fr/hal-01115281
https://hal.archives-ouvertes.fr/hal-01115281/document
https://hal.archives-ouvertes.fr/hal-01115281/file/Andreani_et_al-2014-Geochemistry%2C_Geophysics%2C_Geosystems.pdf
DOI : 10.1002/2014GC005269

Éditeur(s) : HAL CCSD Société géologique de France
Résumé : New-Caledonia island consists of an ultramafic nappe thrusted over a continental and arc-derived basement as the result of the closure of a back-arc basin during the upper Eocene. The morphology of New-Caledonia is mostly characterized by its elongated shape and rectilinear coastline. Indeed, the western and eastern edges of the island are delineated by N140 trending normal faults that are well imaged on seismic lines. Major tectonic lineaments onland, including the scarps corresponding to the main boundary of the ultramafic nappe, also trend N140 suggesting a morphotectonic control by faults having similar kinematics (longitudinal flexure-fault of previous authors). We provide detailed observations from some of these scarps demonstrating indeed that these are not erosional features in origin. We explore the possibility that such surfaces do represent major tectonic limits that accommodated extension and significant tectonic thinning of both the peridotite nappe and its basement. Remnants of a complex extensional fault zone, 200 m wide, are still preserved along the western scarp of the Mont Dore mountain, close to Noumea city. The deformed zone is composed of an early shallow dipping detachment fault, some decimeters thick, offset by a group of late high angle normal faults and is bounded by cataclastic breccias that progressively pass into the fractured host peridotite. The late high angle fault zones have been the site of important syn-tectonic fluid circulation and are underlined by cm-thick silica infills bearing vertical striae. Typical morphology of the main scarps with break of slope is related to the combination of high angle normal faults and low angle detachment. Similar shallow dipping detachment surfaces have been observed along the east coast of southern New-Caledonia as well as within the ultramafic nappe itself and its basement. This study confirms that N140 oriented, large fault zones, with pure-normal to transtensional component of displacement, controlled the morphotectonic evolution of New-Caledonia at the regional scale, after the obduction of ophiolite nappe at the end of the Eocene. Such a fact has to be taken into account when attempting to reconstruct the post-obduction evolution of the island and more particularly when considering the development and distribution of the Ni-rich lateritic surfaces.
EISSN: 1777-5817

hal-00411855
https://hal.archives-ouvertes.fr/hal-00411855
DOI : 10.2113/gssgfbull.179.3.315

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We use 3-D mechanical modeling representing faults as planar surfaces with frictional properties that obey Coulomb-failure process to explore the long-term slip rates of the Altyn Tagh fault and Kunlun faults in the north Tibetan plateau. Crustal theology is simplified as an elastoplastic upper crust and a viscoelastic lower crust. Far-field GPS velocities and late Quaternary fault slip rates are used to constrain the model results. Rheological tests show that effective fault friction lower than 0.1-0.08 leads to high slip rates that fit with geologically and geodetically determined slip rates of the Kunlun fault (10-11.7 +/- 1.5 mm/yr). Meanwhile, the modeled Altyn Tagh fault reaches slip rates similar to 13.7 mm/yr to similar to 7.8 mm/yr in its central portion, between ranges of the geological slip rates. Associated with high slip rates, our model predicts that central Tibet (similar to 84 degrees E-95 degrees E) from the Altyn Tagh fault to the north of the Himalayan arc accommodates north-south shortening and east-west extension rates of similar to 10-12 mm/yr and similar to 8-10 mm/yr, respectively. We also question the widely accepted idea that interseismic strain is driven at the base of the seismogenic zone by a screw dislocation. If this assumption fails, the presented model implies that interseismic strain around large strike-slip faults could be distributed in a much broader way if the lithosphere deforms as a thin elastic plate rather than an elastic half-space with an embedded dislocation. If this distributed deformation is ignored, and the instantaneous surface deformation field modeled as that resulting from slip on a dislocation below a specified depth embedded in an elastic half-space, the estimated slip rate will inevitably be lower than the true long-term slip rate. This appears to explain why geodetic slip rates proposed for the Altyn Tagh fault (510 mm/yr) are lower than some of the geological slip rates. (C) 2008 Elsevier B.V. All rights reserved.
ISSN: 0012-821X

hal-00411926
https://hal.archives-ouvertes.fr/hal-00411926
DOI : 10.1016/j.epsl.2008.06.049

Éditeur(s) : HAL CCSD Geological Society of America
Résumé : International audience
We present the first recorded global positioning system (GPS) data from Myanmar measured at the northern tip of the Sagaing fault. This area is in a very complex geodynamic context, where rigid and semirigid plates interact. The 12 GPS sites measured in 2005 and 2008 in northern Myanmar show that the slip rate is 18 mm/yr and is localized along a single active narrow fault trace (<20 km wide). The same rate was previously demonstrated and remeasured, 500 km southward, in central Myanmar. Despite the geodynamic regional complexity induced by interaction between the Sunda and India plates, the Burma microplate, and the highly deformable eastern Himalayan syntaxis, the slip rate remains surprisingly constant along this fault. However, the modeled locking depth varies from 20 km in central Myanmar to 5 km in the north.
ISSN: 0091-7613

hal-00673712
https://hal.archives-ouvertes.fr/hal-00673712
DOI : 10.1130/G30872.1

Éditeur(s) : HAL CCSD
Résumé : The North Tehran Fault is located at the southernmost piedmont of Central Alborz, north of Iran. It stands out as a major active fault menacing directly the city of Tehran, a 12 million people metropolis, and would have been the source of several major historical earthquakes in the past. The fault zone extends up to 110km and corresponds mainly to a reverse fault mostly crossing the northern suburbs of the Tehran metropolis, although NTF in its eastern part is characterized more as a left lateral strike slip active fault. We carried out a paleoseismological study of the fault zone in order to determine whether the fault was activated during the Holocene, and to define the characteristics of its activity in terms of kinematics and magnitude. Here in this paper we present only a part of our paleoseismological investigations trench TE2. Observations fromtwo trenches dug across the North Tehran fault scarp reveal evidence for a maximum of six surface-rupturing events within the late quaternary. According to the empirical relationships among average displacement per event and Moment magnitude [25], we can estimate six events Mw~ 6.5 associated with these ruptures in TE2 trench.
Journal of Seismology and Earthquake Engineering

hal-00758375
https://hal.archives-ouvertes.fr/hal-00758375

Éditeur(s) : HAL CCSD
Résumé : The Restefond fault, located in the Late Eocene-Early Oligocene Alpine foreland basin, affects the well lithified and low porosity Grès d'Annot. The fault core zone is characterized by the occurrence of highly deformed sandstone lenses. Deformation inside the lenses corresponds to mm to sub-mm-spaced cleavage planes rich in phyllosilicates and up to cm-thick and dm-long quartz-calcite pure extensional veins. The cleavages are mostly composed of newly-formed synkinematic white mica and chlorite. By using thermodynamic thermometers based on the chemical composition of chlorite, a temperature of 200 ± 20 °C of fault activity was computed. This temperature shows that the Restefond fault was active at burial conditions comprised between 6.5 and 8 km, assuming a mean geothermal gradient between 25 and 30 °Ckm−1. The petrophysic properties of sandstones from the core zone and in the hanging and foot wall of the fault were determined on drilled plugs following three spacial directions. The permeability of the highly deformed sandstone from the core zone is about one order of magnitude higher than in the host rock. This increase in permeability occurs in the direction parallel to the S-C structures and is explained by the occurrence of well-connected micropores localized between platy phyllosilicates. This study shows that the fault petrophysic properties are mostly controlled by the precipitation of synkinematic phyllosilicates under deep burial conditions.
Swiss Journal of Geosciences

hal-00795551
https://hal.archives-ouvertes.fr/hal-00795551
DOI : 10.1007/s00015-012-0099-z

Éditeur(s) : Gauthier-villars
Résumé : 69 new hydrothermal sites were discovered during the Naudur diving cruise. Dives were conducted between 17 degrees 5 and 18 degrees 40'5 on four segments showing marked contrast in morphology, volcanic, tectonic and hydrothermal activity. At 17 degrees 10'5, 17 degrees 25'5 and 18 degrees 37'5 the ridge has a dome shaped cross-section and is dominated by very active volcanic activity. Early widespread low temperature (<50 degrees C) diffuse hydrothermal discharge is followed by focused high temperature black smokers. At 18 degrees 15'S tectonic activity is dominant, no recent lava was observed, and only two of the 20 hydrothermal sites are active. At 18 degrees 32'5 recent lava representing a new volcanic episode partly covers the bottom of the graben. Deep hydrothermal convection is reactivated with new black smokers along the graben wall. Also, there is low temperature shimmering water from cooling lava flows. These three segments can be considered as successive volcanic/tectonic episodes typical of a fast spreading ridge. Further, the observations support a new model for the temporal evolution of episodic hydrothermal activity. Hydrothermal convection is unstable and superficial during the volcanic stage (dykes injection). At the beginning of the teaonic stage (graben formation) faults allow deep circulation and hot fluid to reach the surface. As the graben widens hydrothermal activity is less important and may cease. The heat of a new volcanic episode reactivates the deep hot water circulation along the graben faults completing a cycle.
69 nouveaux sites hydrothermaux ont été découverts entre 17'5 et 18'40'5 sur quatre segments présentant des activités volcaniques et tectoniques contrastées. A 17°10'S,17025'S et 18'37'5, la ride forme un dôme et l'activité volcanique est dominante. Les émissions hydrothermales sont d'abord diffuses et de basse température, puis focalisées et de haute température. A 18°15'S la majorité des sites hydrothermaux sont inactifs dans un graben axial dépourvu de laves récentes. A 18'32'5, des laves récentes s'épanchent au fond du graben. Les circuits hydrothermaux réactivés par le nouvel épisode volcanique se traduisent par des diffusions sur les laves récentes et par une reprise des émissions de haute température le long des murs du graben. Ces quatre segments traduisent des épisodes volcanoltectoniques successifs, caractéristiques de I'évolution temporelle des dorsales rapides. Les observations permettent de proposer un nouveau modèle de l'activité hydrothermale. Les circuits hydrothermaux sont diffus, peu structurés, instables et superficiels durant les épisodes volcaniques. Au début des épisodes tectoniques, les failles du graben drainent les fluides chauds en profondeur, puis lorsque le graben s'élargit, l'activité s'interrompt. La reprise de l'activité volcanique réamorce les circulations profondes le long des failles du graben.
Comptes Rendus de l'Academie des Sciences Serie II (1251-8069) (Gauthier-villars), 1994-12 , Vol. 319 , N. 11 , P. 1399-1406

Droits : Académie des Sciences
http://archimer.ifremer.fr/doc/00183/29455/27889.pdf
http://archimer.ifremer.fr/doc/00183/29455/