Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
In south China the Lushan massif forms a topographic high of the South China Block south of the Qinling-Dabie belt. The Lushan massif consists of two main lithotectonic units separated by a major tectonic contact: a Neoproterozoic (upper Sinian)-Paleozoic unit comprising primarily unmetamorphosed sandstones overlies a Paleoproterozoic unit mainly composed of low-pressure, high-temperature gneisses and micaschists. Both units are cut by Cretaceous granitic intrusions. Three primary tectono-metamorphic and magmatic events are recognized. The eastern part of the Lushan massif is cut by a NNE-SSW trending ductile normal fault (D3 deformation) coeval to the emplacement of a 100-110 Ma leucogranite dated by 40Ar/39Ar laserprobe on biotite and muscovite. D2 deformation is responsible for the formation of a decakilometer-scale NE-SW trending upright anticline characterized by NE-SW stretching and NW-SE shortening. The age of this folding event is defined by a 127±1 (2σ) Ma U/Pb titanite date obtained for a syntectonic granodiorite and 40Ar/39Ar ages of 133 Ma for amphibole. This Cretaceous age also corresponds to the 40Ar/39Ar ages of 126 Ma found on syntectonic muscovites at the base of the Sinian unit. An older deformation event, D1, characterized by a top-to-the-NW extensional decollement of the Sinian-Paleozoic series above Proterozoic metamorphic rocks is related to the Triassic tectonics of the Dabieshan. Lastly, in the lower part of Sinian rocks, the occurrence of kyanite cataclased during D1 documents an older, poorly preserved, late Paleozoic-early Mesozoic tectonometamorphic event (Dx) related to a blind thrust in the continental crust of the South China Block in the southern foreland of the Dabieshan.
ISSN: 0278-7407

insu-00717721
https://hal-insu.archives-ouvertes.fr/insu-00717721
https://hal-insu.archives-ouvertes.fr/insu-00717721/document
https://hal-insu.archives-ouvertes.fr/insu-00717721/file/Lin-Tectonics-2000.pdf
DOI : 10.1029/2000TC900009

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Recent geochemical work shows that subduction-zone serpentinites are repositories for fluid-mobile elements absorbed during interaction with sediment-derived fluids. Unraveling the geochemical fingerprint of these rocks helps to define timing of tectonic accretion of sediments along the subduction interface and the role of serpentinite in element recycling to volcanic arcs. Here we present the trace element and isotopic composition (B–O–H, Sr, Pb) of high-pressure serpentinites from the Voltri Massif (Ligurian Western Alps, Italy), to discuss their role as incompatible element carriers and their contribution to recycling of sediment-derived components in subduction zones.The serpentinites presented here record metamorphic olivine growth during eclogite-facies metamorphism and show undeformed and mylonitic textures. Field relations show that undeformed rocks are enclosed in deformed ones and that no metasedimentary rocks are present nearby. Undeformed serpentinite has very high δ11BSRM951 (from +26‰ to +30‰), low Sr and Pb isotope ratios (87Sr/86Sr = 0.7053–0.7069; 206Pb/204Pb = 18.131–18.205) and low As and Sb contents (0.1 and 0.01 μg/g, respectively). Oxygen and hydrogen isotope compositions are +4.5‰ and −67‰, respectively. In contrast, mylonitic serpentinite shows lower δ11B (from +22‰ to +17‰), significant enrichment in radiogenic Sr and Pb isotopes (87Sr/86Sr up to 0.7105; 206Pb/204Pb up to 18.725), and enrichment in As and Sb (1.3 and 0.39 μg/g, respectively). δ18O of the mylonitic serpentinites reaches values of +5.9‰, whereas δD is comparable with that of undeformed rocks (approximately −70‰). In mylonitic serpentinites, the B and Sr isotopic values and the fluid-mobile element (FME) concentrations are near those for the Voltri metasedimentary rocks (calc- and mica-schists). Pb systematics also reveal influx of a crust-derived component.Our dataset shows that undeformed serpentinite still preserves an oceanic geochemical fingerprint, whereas mylonitic serpentinite is reset in its concentrations of FME and its B, Sr and Pb isotope compositions, due to interaction with sediment- and crust-derived fluids. The environment of this interaction is either compatible with (i) an outer-rise zone setting, with percolation of seawater-derived fluids enriched in sedimentary components into bending-related fault structures, or with (ii) subduction channel domains, where ascending sediment-derived slab fluids infiltrate slices of former oceanic serpentinite accreted to the plate interface domain. Influx of sediment-derived subduction fluids along major deformation zones in serpentinite modifies the element budget of the rocks, with important implications for element recycling and the tectonic history of serpentinite. The B, Sr and Pb isotopic systematics, coupled with FME concentration in serpentinites are particularly helpful geochemical tracers of interaction between different reservoirs in subduction-interface environments, and are more sensitive than the traditionally applied stable oxygen and hydrogen isotope compositions.
ISSN: 0016-7037

hal-01419940
https://hal.archives-ouvertes.fr/hal-01419940
DOI : 10.1016/j.gca.2016.06.034

Éditeur(s) : HAL CCSD Wiley-Blackwell
Résumé : International audience
We explore the tectono-magmatic processes in the western West Philippine Basin, Philippine Sea Plate, using bathymetric data acquired in 2003 and 2004. The northwestern part of the basin formed through a series of northwestward propagating rifts. We identify at least five sequences of propagating rifts, probably triggered by mantle flow away from the mantle thermal anomaly that is responsible for the origin of the Benham and Urdenata plateaus. Gravitational forces caused by along-axis topographic gradient and a ∼30° ridge reorientation appear to also be driving the rift propagations. The along-axis mantle flow appears to be reduced and deflected along the Luzon-Okinawa fracture zone, because the spreading system remained stable west of this major fault zone. North-east of the Benham plateau, a left-lateral fracture zone has turned into a NE–SW-trending spreading axis. As a result, a microplate developed at the triple junction.
ISSN: 0954-4879

insu-00304360
https://hal-insu.archives-ouvertes.fr/insu-00304360
DOI : 10.1111/j.1365-3121.2008.00824.x

Éditeur(s) : HAL CCSD
Résumé : The spreading ridge subduction is an unavoidable process during the subduction-related belt elovution. The aim of this thesis concerns the evolution of the Central Patagonian Cordillera, at the latitude of the Chile triple junction, in relation with the Chile spreading ridge subduction inducing the opening of a slab-window beneath the South American plate. By a morphologic, and a structural analysis, coupled with the analysis of satelittes and topographic images, we show the influence of the slab-window development at 3 Ma on the morphostructural evolution of the Central Patagonia. During the Pliocene, the Central Patagonian Cordillera experiences a major extensional phase inducing the formation of transverse and internal depressions. Negative tectonic inversion, responsible to the rift-type topography, induces the inversion of the morphotectonic front and the disruption of the volcano-sedimentary piedmont with the rest of the Cordillera at 3 Ma. Radial extensional regime is characterized by a magnitude comprises between 800 m and 3500 meters and vertical movements are localized along polyphazed faults. We suggest that the Plio-Quaternary morphostructural evolution is related to the opening of the slab-window at 3 Ma beneath the Central Patagonia. The upwelling of asthenospheric hot mantle through the slab window induces the regional collapse of the Central Patagonian Cordillera.
La subduction d'une dorsale active sous un continent est un processus inévitable dans l'évolution des chaînes de subduction. Le travail de cette thèse concerne l'évolution de la Cordillère de Patagonie Centrale, à la latitude du point triple du Chili, en relation avec la subduction de la dorsale active du Chili induisant le développement d'une fenêtre asthénosphérique sous la plaque sudaméricaine. A l'aide d'une approche morphologique, structurale, couplée à l'analyse d'images satellites et topographiques, nous montrons l'influence de la fenêtre asthénosphérique depuis 3 Ma sur l'évolution morphostructurale de la Patagonie Centrale. Au cours du Pliocène, la Cordillère de Patagonie Centrale est marquée par une phase d'extension majeure induisant la formation de dépressions transverses et internes à la chaîne. L'inversion négative du relief responsable de la topographie générale de type rift induit l'inversion du front morphotectonique et la déconnexion du piedmont volcano-sédimentaire du reste de la Cordillère à partir de 3 Ma. L'extension radiale dont l'amplitude est comprise entre 800 mètres et 3500 mètres, se localise dans la plupart des cas au niveau de failles polyphasées. L'évolution morphostructurale plioquaternaire proposée est directement reliée à l'ouverture de la fenêtre asthénosphérique à 3 Ma sous la Patagonie et à la remontée de matériel asthénosphérique chaud induisant la collapse régionale de la Cordillère de Patagonie Centrale.
https://tel.archives-ouvertes.fr/tel-00557618

tel-00557618
https://tel.archives-ouvertes.fr/tel-00557618
https://tel.archives-ouvertes.fr/tel-00557618/document
https://tel.archives-ouvertes.fr/tel-00557618/file/scalabrinothese.pdf

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
The current structure of the South Armorican Domain in the French Variscan Belt, provides an excellent record of the late orogenic evolution, as documented by the complex interactions between extensional structures and partial melting. In the Golfe du Morbihan, the South Brittany Migmatite Belt (SBMB), tectonically overlain by non-melted metamorphic units, was studied by combined structural and 40Ar/39Ar methods. The recognition of successive deformation stages points to a strain continuum initiated at depth at the end of a partial melting event, and continued to near-surface brittle faulting, encompassing ductile strain localization over a major top-to-the-ESE extensional shear zone (SSZ) consistent with an overall WNW-ESE orogen-parallel stretching. This multidisciplinary study making the link between structure, texture, microchemistry and 40Ar/39Ar geochronology allow distinguishing between cooling, recrystallization and syn-tectonic crystallization ages. The first extensional insights, witnessed by dyke intrusion were dated at ~319 ± 6 Ma immediately after the SBMB partial melting. Strain localization along the SSZ, occurred until ~302-298 Ma when SBMB crossed the ductile-brittle transition. Moreover, in situ 40Ar/39Ar analysis, of syn-tectonic white micas sampled in the ductile and brittle structures yield similar ~300 Ma. Formation or reactivation of the SSZ may have occurred during the rapid cooling of the SBMB settled at ~305 Ma by conventional 40Ar/39Ar analysis. Large-scale late orogenic extensional event of the previously overthickened Variscan crust thus lasted over ~20 ± 3 Myr in the same extensional tectonic regime guided by the South Armorican Shear Zone.
ISSN: 0278-7407

insu-00628699
https://hal-insu.archives-ouvertes.fr/insu-00628699
https://hal-insu.archives-ouvertes.fr/insu-00628699/document
https://hal-insu.archives-ouvertes.fr/insu-00628699/file/2010TC002788.pdf
DOI : 10.1029/2010TC002788

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Deep crustal and mantle rocks are exhumed in core complex mode of extension in three types of structures: metamorphic core complexes, oceanic core complexes and magma poor passive margins. Using available analogue and numerical models and their comparison with natural examples, the present paper reviews the mechanical processes involved in these different types of extensional setting. Three main aspects are considered: i) the primary role of lithosphere rheology, ii) the lithosphere-scale patterns of progressive deformation that lead to the exhumation of deep metamorphic or mantle rocks and iii) the initiation and development of detachment zones. Crustal core complexes develop in continental lithospheres whose Moho temperature is higher than 750 °C with “upper crust-dominated” strength profiles. Contrary to what is commonly believed, it is argued from analogue and numerical models that detachments that accommodate exhumation of core complexes do not initiate at the onset of extension but in the course of progressive extension when the exhuming ductile crust reaches the surface. In models, convex upward detachments result from a rolling hinge process. Mantle core complexes develop in either the oceanic lithosphere, at slow and ultra-slow spreading ridges, or in continental lithospheres, whose initial Moho temperature is lower than 750 °C, with “sub-Moho mantle-dominated” strength profiles. It is argued that the mechanism of mantle exhumation at passive margins is a nearly symmetrical necking process at lithosphere scale without major and permanent detachment, except if strong strain localization could occur in the lithosphere mantle. Distributed crustal extension, by upper crust faulting above a décollement along the ductile crust increases toward the rift axis up to crustal breakup. Mantle rocks exhume in the zone of crustal breakup accommodated by conjugate mantle shear zones that migrate with the rift axis, during increasing extension.
ISSN: 0040-1951

insu-01610186
https://hal-insu.archives-ouvertes.fr/insu-01610186
https://hal-insu.archives-ouvertes.fr/insu-01610186/document
https://hal-insu.archives-ouvertes.fr/insu-01610186/file/brun-tect-2017.pdf
DOI : 10.1016/j.tecto.2017.09.017