Éditeur(s) : Université Européenne de Bretagne
Résumé : The southwest Pacific results from the fragmentation of Gondwanaland since the Cretaceous time. The purpose of the current PhD work is to deepen our understanding of the history of the New Caledonia and Fairway basins, located west of New Caledonia, in order to better constrain the geodynamical evolution of the SW Pacific from Cretaceous to Oligocene. The analysis of new geophysical data has led to distinguish 3 main phases of this fragmentation: 1 Mid Cretaceous formation of the Fairway-Aotea Basin in a continental intra-arc position. The formation of this basin reflects the initial stage of continental fragmentation of the Eastern Gondwana margin. The causes of this fragmentation are to be searched for in a major change of the dynamics of the peri-Pacific subduction zone. 2 Latest late Eocene local deformation of the Northern NCB, synchronously with the New Caledonian obduction. We suggest that as the ophiolitic nappe was being obducted onto New Caledonia, the NC Basin subsided under the effect of the loading and underthrusted to accommodate the compressional deformation as a foreland flexural basin. 3 Regional Eocene Oligocene subsidence of the structures linking NC to New Zealand. The morphostructural style of this deformation leads us to suggest that detachment of the lower crust is the cause of subsidence. We therefore propose a model in which the renewal of the Australia-Pacific convergent plate boundary around 45 Ma would have driven the lithosphere to thicken, leading to a root instability and to its detachment in the mantle. These new results have regional petroleum implications, which are discussed in the PhD.
Le Sud-Ouest Pacifique est le résultat de la fragmentation de la marge Est du Gondwana depuis le Crétacé. L'objet du présent travail de thèse est d'approfondir la connaissance des bassins de Nouvelle-Calédonie et de Fairway, situés à l'Ouest de la NC, afin de préciser l'évolution géodynamique du SO Pacifique du Crétacé à l'Oligocène. L'analyse de nouvelles données géophysiques a permis de dégager 3 étapes de cette fragmentation: 1 Formation du Bassin de Fairway-Aotea au Crétacé moyen en position intra-arc continental. La formation de ce bassin reflète les prémices de la déchirure continentale de la marge Est Gondwanienne dont la cause est à rechercher dans un changement de la dynamique de la subduction. 2 Déformation locale de la partie Nord du BNC à l'Eocène terminal synchrone à l'obduction Néo Calédonienne. Nous proposons ainsi un modèle selon lequel le BNC aurait subsidé et réagi comme un bassin flexural d'avant-pays suivant un processus de sous-charriage, au fur et à mesure que la nappe progressait sur le bâti Calédonien. 3 Subsidence Eocène Oligocène régionale affectant les structures reliant la Nouvelle-Zélande à la NC. Les traits morphostructuraux de cette déformation nous permettent d'émettre l'hypothèse que l'ablation d'une partie de la croûte inférieure de ce système serait responsable de la subsidence. Nous proposons ainsi un modèle dans lequel la reprise de la convergence vers 45 Ma entre les plaques Australienne et Pacifique aurait entraîné un épaississement crustal de l'ensemble aboutissant à une instabilité gravitaire de sa racine et provoquant son détachement dans le manteau. Ces nouveaux résultats ont des implications pour le potentiel pétrolier régional.

Droits : info:eu-repo/semantics/openAccess
http://archimer.ifremer.fr/doc/2009/these-6520.pdf
http://archimer.ifremer.fr/doc/2009/sup-6520.pdf
http://archimer.ifremer.fr/doc/00000/6520/

Éditeur(s) : Soc Geol France
Résumé : The Lesser Antilles subduction zone has produced no recent strong thrust earthquakes, making it difficult to quantify the seismic hazard from such events. The Lesser Antilles arc has a low subduction rate and an accretionary wedge that is very wide at its southern end. To investigate the effect of the wedge on seismogenesis, numerical models of forearc thermal structure were constructed along six transects perpendicular to the arc in order to determine the thermally predicted width of the seismogenic zone. The geometry of each section is constrained by published seismic profiles and crustal models derived from gravity and seismic data and by earthquake hypocenters at depth. A major constraint on the deep part of the model is that mantle temperature beneath the volcanic arc should achieve a temperature of 1,100 degrees C to generate partial melts. Predicted surface heat flow is compared to the available heat flow observations. Thermal modeling results indicate a systematic southward increase in the width of the seismogenic zone, more than doubling in width from north to south and corresponding to a dramatic southward increase in forearc width (distance from the arc to the deformation front of the accretionary wedge). The minimum width of the seismogenic zone (distance between the intersections of the subduction interface with the 150 degrees C and 350 degrees C isotherms) increases from about 80 km, north of 16 degrees N, to 230 km, at 13 degrees N. The maximum width (between the 100 degrees C and 450 degrees C isotherms) ranges from about 150 km in the north to up to 320 km in the south. This large variation in the width of the seismogenic zone is a consequence of the increasing width of the accretionary wedge to the south, caused by the increased thickness of sediment on the subducting plate. There is good agreement between the thermally predicted seismogenic limits and the sparse distribution of recorded thrust earthquakes, which are observed only in the northern portion of the arc. Possible scenarios for mega-thrust earthquakes are discussed. Depending on the segment length (along-strike) of the rupture plane, the occurrence of an event of magnitude 8-9 cannot be excluded.
L’absence de grands séismes récents à mécanismes chevauchants dans la zone de subduction des Petites Antilles rend difficile l’évaluation de l’aléa sismique lié à de tels événements. L’arc des Petites Antilles est caractérisé par une faible vitesse de subduction et par la présence d’un prisme d’accrétion très développé à son extrémité méridionale. Afin d’évaluer les effets de la largeur de ce prisme sur la genèse des séismes, nous avons étudié six sections perpendiculaires à l’arc, du nord au sud de celui-ci, pour déterminer la largeur de la zone sismogène prédite par les modèles thermiques appliqués à chacune de ces coupes. La géométrie de ces dernières est contrainte par les profils sismiques publiés, par les modèles de structure crustale déduits des données gravitaires et sismiques, et enfin par la distribution des hypocentres des séismes. Un contrôle important permettant de tester la validité des modèles thermiques en profondeur est qu’une température minimale de 1 100oC, compatible avec la fusion partielle du manteau hydraté, doit être atteinte sous l’arc volcanique actif. Par ailleurs, le flux thermique en surface prédit par ces modèles doit être compatible avec les mesures de flux de chaleur. Les modèles thermiques retenus d’après ces critères montrent une augmentation du simple au double vers le sud de la largeur de la zone sismogène, qui correspond à un élargissement considérable de la taille du domaine avant-arc. En effet, la largeur minimale de la zone sismogène (définie comme la distance entre les intersections de l’interface des plaques avec les isothermes 150o et 350oC) augmente d’environ 80 km au nord de 16oN jusqu’à 230 km à 13oN. La largeur maximale de cette zone (définie par les intersections de l’interface avec les isothermes 100o et 450oC) augmente, quant à elle, d’environ 150 km au nord jusqu’à 320 km au sud de l’arc. Cette variation considérable est la conséquence de l’augmentation de la largeur du prisme d’accrétion, elle-même causée par l’accumulation croissante des sédiments déposés sur la plaque plongeante. Les largeurs de la zone sismogène prédites à l’aide des modèles thermiques sont en bon accord avec les rares données disponibles sur les séismes à mécanismes chevauchants dans la partie nord de l’arc. Les scénarios possibles relatifs à des méga-séismes de ce type n’excluent pas de futurs événements atteignant des magnitudes de 8 à 9.
Bulletin De La Societe Geologique De France (0037-9409) (Soc Geol France), 2013 , Vol. 184 , N. 1-2 , P. 47-59

Droits : 2013 Societe Geologique de France
http://archimer.ifremer.fr/doc/00140/25140/29432.pdf
DOI:10.2113/gssgfbull.184.1-2.47
http://archimer.ifremer.fr/doc/00140/25140/

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
Two types of olivine occur in kimberlites from Greenland, Canada and southern Africa. The first, xenocrystic olivine, displays several different forms. Most distinctive are 'nodules', a term we use to describe the large (1-5 mm), rounded, single crystals or polycrystalline aggregates that are a common constituent of many kimberlites. Olivine compositions are uniform within single nodules but vary widely from nodule to nodule, from Fo81 to 93. Within many nodules, sub- to euhedral asymmetric tablets have grown within larger anhedral olivine grains. Dislocation structures, particularly in the anhedral grains, demonstrate that this olivine was deformed before being incorporated into the kimberlite magma. Olivine grains in the kimberlite matrix between the nodules have morphologies similar to those of the tablets, suggesting that most matrix olivine grains are parts of disaggregated nodules. We propose that a sub- to euhedral form is not sufficient to identify phenocrysts in kimberlites and provide some criteria, based on morphology, internal deformation and composition, that distinguish phenocrysts from xenocrysts. The second type of olivine is restricted to rims surrounding xenocrystic grains. Only this olivine crystallized from the kimberlite magma. Major and trace element data for the rim olivine are used to calculate the composition of the parental kimberlite liquid, which is found to contain between about 20 and 30% MgO. The bulk compositions of many kimberlites contain higher MgO contents as a result of the presence of xenocrystic olivine. The monomineralic, dunitic, character of the nodules, and the wide range from Fo-rich to Fo-poor olivine compositions, provide major constraints on the origin of the nodules. Dunite is a relatively rare rock in the mantle and where present its olivine is persistently Fo-rich. The dunitic source of the nodules in kimberlites lacked minerals such as pyroxene and an aluminous phase, which make up about half of most mantle-derived rocks. It appears that these minerals were removed from the mantle peridotite that was to become the source of the nodules, and the Fo content of the retained olivine was modified during interaction with CO2-rich fluids whose arrival at the base of the lithosphere immediately preceded the passage of the kimberlite magmas. Fragments of the resultant dunite were entrained into the kimberlite, where they were retained both as intact nodules and as disaggregated grains in the matrix.
ISSN: 0022-3530

insu-00543321
https://hal-insu.archives-ouvertes.fr/insu-00543321
BIBCODE : 10.1093/petrology/egp080
DOI : 10.1093/petrology/egp080

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
Seismic anisotropy has been widely studied this last decade, particularly by measuring splitting of vertically propagating core shear waves. The main interest in this technique is to characterize upper mantle flow beneath seismic stations. On the other hand, the major restriction in this method is that a single station gives a single anisotropy measurement. Alternative methods have been developed in order to avoid this restriction. An accurate determination of upper mantle seismic anisotropy beneath a seismic station may allow one, by doing anisotropy correction, to characterize remote or deeper anisotropy. The Geoscope network is ideal for this purpose because it is composed of a large set (about 26) of high-quality, broadband seismometers globally distributed and because some of these stations have run for more than 10 years and most of them for more than 5 years. We selected about 100 events at each site, generally of magnitude (m b) > 6.0, and we performed systematic measurements of the splitting parameters (fast polarization direction φ and delay time δt) on SKS, SKKS, and PKS phases. Splitting on oceanic islands has been difficult to observe owing to the low quality of the signal but also perhaps owing to complex upper mantle structures beneath the stations. Station KIP (Kipapa, Hawaii) in the Pacific is the only oceanic Geoscope station with a clear anisotropy. We determined well-constrained splitting parameters for 10 of the 17 continental stations that may be explained by a single anisotropic layer. The poor correlation between fast polarization directions and the absolute plate motion together with the apparent incoherence between the plate velocities and the observed delay times suggest that a simple drag-induced asthenospheric flow alone fails to explain most of the observations. For some stations located on or near major lithospheric structures (TAM, Tamanrasset, Algeria, for instance), we observe a good correlation between fast polarization directions and regional structures. At station SCZ (Santa Cruz, California), we found clear variations of the splitting parameters as a function of the event backazimuth, compatible with two layers of anisotropy. Three stations (CAN (Canberra), HYB (Hyderabad, India) and SSB (Saint Sauveur Badole, France)) seem to be devoid of detectable anisotropy.
ISSN: 2169-9313

hal-01388830
http://hal.univ-reunion.fr/hal-01388830
http://hal.univ-reunion.fr/hal-01388830/document
http://hal.univ-reunion.fr/hal-01388830/file/Barruol_anisoGeoscope_JGR1999.pdf
DOI : 10.1029/1999JB900033

Éditeur(s) : HAL CCSD Elsevier
Résumé : Nominally anhydrous minerals (NAMs) of Earth's mantle can contain hydrogen as atomic impurity in their crystal structures. This hydrogen substantially modifies many physical properties of Earth's mantle rocks. Also, the Earth's deep interior is made of rocks where minerals are separated by nanometer-scale interfaces call grain boundaries and interphase boundaries. These grain boundaries should carefully be considered as a potential hydrogen reservoir as well. I report here an experimental investigation of hydrogen diffusion through grain boundaries in olivine polycrystalline aggregates. Hot-press and diffusion experiments were performed using a gas-medium high-pressure vessel at a confining pressure of 300 MPa, over a temperature range of 1000-1200 degrees C. The diffusion assembly consisted of a dense polycrystalline cylinder of natural olivine from San Carlos (Arizona) mixed with olivine singles crystals of millimeter size. This mixture was couple with a talc cylinder. Ni capsule were used to buffer the oxygen fugacity at Ni-NiO level. Experiment durations varied from 3 min to 4 h. The presence of hydrogen in the sample was quantified using Fourier transform infrared spectroscopy. The calculation of the diffusion coefficients was based on the estimation of the length of polycrystalline solid affected by the diffusion of hydrogen. The absence or presence of hydrogen was recorded by the large olivines behaving here as "hydrogen sensor", which are implanted in the aggregate. The results indicate that effective hydrogen diffusivity which includes grain boundaries effect in olivine aggregate is barely one order of magnitude faster than hydrogen diffusion in an olivine single crystal with a diffusivity similar to 8.5x 10(-10) m(2) s(-1) 1000 degrees C and only twice faster similar to 2.1 x10(-9) m(2) s(-1) 1200 degrees C. Calculations of the diffusion data in relation to the Arrhenius Law, yield an activation energy of similar to 70 +/- 10 kJ mol(-l) . From these effective diffusivities and combined with published diffusion data for olivine single crystals, hydrogen diffusion in grain boundaries is extracted and yield diffusivities almost three order of magnitude faster (similar to 5 x 10(-6) m(2) s(-1) at 1200 degrees C) than in an olivine single crystal at the equivalent high temperature. On geological scales and for coarse-grain rocks, hydrogen diffusivity in grain boundaries is not fast enough to compete with lattice diffusion. The relative large grain size of mantle rocks will ensure a very limited hydrogen transport by effective diffusion, and a good conservation of water-rich zones in the Earth's mantle.
ISSN: 0012-821X

hal-00512821
https://hal.archives-ouvertes.fr/hal-00512821
DOI : 10.1016/j.epsl.2010.04.019

Résumé : Tahiti’s pearl farming industry plays a major socio-economic role in French Polynesia. In an increasingly competitive market where the production of high quality pearls becomes essential, research can help secure and ensure sustainable production. In that context, Ifremer, in close collaboration with the “direction des resources marines” (French Polynesian government agency) has developed research projects on the “sustainable development of pearl farming”. This program is organized along 3 axes: (1) understanding the animal physiology and initiating a genetically selective breeding program of donor oysters; (2) understanding pearl oyster larvae dispersal and recruitment; (3) understanding the molecular mechanisms underlying biomineralization processes during shell and pearl formation. It is in this frame that we have developed a highthroughput Expressed Sequence Tags pyrosequencing program on the calcifying mantle, combined with proteomic analyses of the shell and pearl. We analyzed 276738 EST sequences, leading to the constitution of a P. margaritifera mantle transcripts catalogue of 82 sequences potentially involved in biomineralization. Our results provided direct evidence that our ESTs data set covers a large number of the matrix proteins of P. margaritifera. In addition, our proteomic analysis enabled us to retrieve, in silico, all the sequences from P. margaritifera involved in the biomineralization process already published on databases. Integration of these two methods allowed, for the first time, the global composition of calcifying tissue and calcified structures to be examined in tandem.
Recent Advances in Pearl Research—Proceedings of the International Symposium on Pearl Research 2011.Edited by Shugo Watabe, Kaoru Maeyama and Hiromichi Nagasawa. 2013. ISBN : 978-4-88704-158-5. pp.184-194

Droits : 2013 TERRAPUB. All rights reserved.
http://archimer.ifremer.fr/doc/00167/27840/26049.pdf
http://archimer.ifremer.fr/doc/00167/27840/

Éditeur(s) : HAL CCSD
Résumé : Differentiation of the lithospheric mantle occurred principally through partial melting and extraction of melts. Harzburgites are generally considered as melting residues whereas lherzolites are regarded as pristine mantle weakly affected by melting. However, some orogenic peridotites show evidence of igneous refertilization. In this context, this work re-investigates the nature of the Lherz lherzolites (Pyrenees), type-locality of lherzolites, described as a piece of preserved fertile mantle. Structural and geochemical data show that these lherzolites are not pristine but formed through a refertilization reaction between MORB-like melts and refractory lithosphere. Moreover, the Lherz peridotites were partly used to infer the composition of the primitive upper mantle and these results may have important implications for the nature of the late veneer. Additionally, crystal-preferred orientations of minerals (CPO) highlight a strong feedback between melt percolation and finite strain in the percolated rocks. CPO variations are ruled by a subtle balance between instantaneous melt fraction and local strain rate. This work also investigated the effect of melt percolation on Hf, Nd and Sr isotopes. Isotope systematics in Lherz shows that strong isotopic decoupling may arise in a percolation front. The modelling suggests that decoupled isotopic signatures are generated during porous flow and governed by the melt/matrix elements concentrations, chemical diffusivities or efficiency of isotopic homogenization. Melt-rock interactions can generate “intraplate-like” isotopic signatures. This suggests that a part of isotopic signatures of mantle-related rocks could be generated by diffusional processes associated with melt transport.
La différenciation du manteau lithosphérique s'est principalement effectuée par fusion partielle et extraction de magmas. Les harzburgites sont généralement considérées comme des résidus de fusion tandis que les lherzolites représentent un manteau originel peu affecté par la fusion. Cependant, certaines péridotites orogéniques montrent des évidences de refertilisation magmatique. Dans ce contexte, ce travail remet en cause la nature primitive des lherzolites de Lherz (Pyrénées), lithotype de la lherzolite. Les données structurales et géochimiques montrent que ces lherzolites ne représentent pas du manteau préservé mais qu'elles se sont formées par une réaction de refertilisation entre un liquide de type MORB et une lithosphère réfractaire. De plus, les orientations préférentielles de réseau (OPR) des minéraux montrent une forte interdépendance entre la percolation magmatique et la déformation finie observée dans les roches percolées. Les variations d'OPR semblent contrôlées par un équilibre subtil entre fraction de liquide instantanée et taux de déformation local. Ce travail a également abordé les effets de la percolation magmatique sur la variabilité isotopique des roches mantelliques. Les résultats montrent qu'un fort découplage isotopique peut s'observer dans un front de percolation. Les modèles suggèrent que le découplage des signatures isotopiques se produit pendant la percolation, gouverné par le rapport des concentrations en éléments (magma/matrice), la diffusivité et le processus d'homogénéisation isotopique. Les réactions magma/roche peuvent générer des signatures isotopiques de type intraplaque. Ceci suggère qu'une part des signatures isotopiques des roches ou laves dérivées du manteau pourrait être produite par des processus diffusionnels associés à du transport de magma.
https://tel.archives-ouvertes.fr/tel-00431325

tel-00431325
https://tel.archives-ouvertes.fr/tel-00431325
https://tel.archives-ouvertes.fr/tel-00431325/document
https://tel.archives-ouvertes.fr/tel-00431325/file/theseleroux08.pdf

Éditeur(s) : HAL CCSD Springer
Résumé : Subduction is a major process that plays a first-order role in the dynamics of the Earth. The sinking of cold lithosphere into the mantle is thought by many authors to be the most important source of energy for plates driving forces. It also deeply modifies the thermal and chemical structure of the mantle, producing arc volcanism and is responsible for the release of most of the seismic energy on Earth. There has been considerable achievements done during the past decades regarding the complex interactions between the various processes acting in subduction zones. This volume contains a collection of contributions that were presented in June 2007 in Montpellier (France) during a conference that gave a state of the art panorama and discussed the perspectives about "Subduction Zone Geodynamics". The papers included in this special volume offer a unique multidisciplinary picture of the recent research on subduction zones geodynamics. They are organized into five main topics: Subduction zone geodynamics, Seismic tomography and anisotropy, Great subduction zone earthquakes, Seismogenic zone characterization, Continental and ridge subduction processes. Each of the 13 papers collected in the present volume is primarily concerned with one of these topics. However, it is important to highlight that papers always treat more than one topic so that all are related lighting on different aspects of the complex and fascinating subduction zones geodynamics.
https://hal.archives-ouvertes.fr/hal-00808864

ISBN : 978-3-540-87974
hal-00808864
https://hal.archives-ouvertes.fr/hal-00808864

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Serpentinites are one of the major components of the oceanic lithosphere and are stable in the slab and the mantle wedge up to 100-150 km depth in subduction zones. During oceanic mantle hydration and alteration, they trap trace and fluid mobile (FME: B, Li, As, Sb, Rb, Ba, Cs, Sr, U and Pb) elements that participate to elemental transfer occurring between the dehydrating slab and the mantle wedge in subduction context. The Lanzo massif is an eclogitized oceanic lithosphere that preserved its oceanic structure and recorded different steps of serpentinization/de-serpentinization from oceanic lizardite to prograde antigorite in subduction context, up to its dehydration and secondary olivine crystallization, and finally retrograde antigorite during massif exhumation. It constitutes a suitable place to study trace element behavior during serpentinization/de-serpentinization processes and associated chemical transfers between the different envelopes of the oceanic lithosphere and the mantle wedge. Geochemical analyses of serpentine and associated minerals show that the serpentinization/de-serpentinization of the Lanzo massif took place in a relatively closed system without significant trace element transfer between the different parts of the oceanic lithosphere. In the deeper part of the lithosphere, from the slightly serpentinized mantle peridotites (SSP, < 20% serpentinization) to the paleo-Moho, composed of massive serpentinites (MS, 80% serpentinization), the trace elements mobility is reduced. The chemical composition of lizardite and antigorite is homogenized with the local degree of serpentinization: in SSP, serpentine veins composition is inherited from the host mineral while, in MS, their composition is homogenous between destabilized phases at the scale of the outcrop (~ 5 m). In the shallowest part of the oceanic lithosphere, from the paleo-Moho to the oceanic paleo-seafloor, the serpentinites are foliated (FS, > 90% serpentinization). In that zone, the alpine deformation enhances the mobility of trace elements and permits their redistribution and the homogenization of antigorite composition at massif scale. Locally, in the SSP and MS, the crystallization of metamorphic veins of ~ 1-2 m corresponds to channelized fluid flows that allowed fluid transfers - and thereby trace elements - to longer distance. The successive crystallizations of antigorite and then olivine are accompanied by a diminution of some FME (B, Li, As, Sb, Ba, Rb) and Eu contents attesting that these elements are removed from slab to mantle wedge during subduction.
ISSN: 0009-2541

hal-00937661
https://hal.archives-ouvertes.fr/hal-00937661
DOI : 10.1016/j.chemgeo.2013.08.025

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
As previously suggested by many authors, shear wave splitting rneasurernents certainly provide the best insights on the tectonic structure (or fabric) of the upper mantle. Shear wave splitting pararneters are correlated with the flow fabric developed in the deforming upper mantle. Petrophysical analysis of peridotites [e.g., Kem et al., 1996; Mainprice and Silver, 1993] shows that the largest anisotropy is recorded for shear waves propagating close to the Y structural direction (i.e., normal to the lineation in the foliation plane) and that the fast split shear wa ve is polarized in a plane parallel to the X structural axis (i.e., the lineation, marked by the olivine a axis concentration). Mapping shear wave splitting parameters over a specific tectonic domain would therefore provide an image of the mantle fabric at depth.
ISSN: 2169-9313

hal-01389720
http://hal.univ-reunion.fr/hal-01389720
http://hal.univ-reunion.fr/hal-01389720/document
http://hal.univ-reunion.fr/hal-01389720/file/Vauchez_comment_JGR_1999_hal.pdf
DOI : 10.1029/1999JB900053

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We investigated the structure of the upper mantle beneath southeastern Brazil using teleseismic shear wave splitting measurements. Measurements were performed on seismic data recorded in the Ribeira and Brasilia Neoproterozoic belts, which wrap around the southern termination of the São Francisco craton and disappear westward under the Paraná basin. In the northern Ribeira belt, dominated by thrust tectonics, the fast shear wave polarization planes trend on average N080°E, whereas in the central domain, dominated by strike-slip tectonics, fast shear waves are polarized parallel to the structural trend (N065°E). Stations located above the main transcurrent fault display large delay times (> 2.5 s). Such values, among the largest in the world, require either an unusually large intrinsic anisotropy frozen within the lithosphere, or a contribution from both the lithospheric and asthenospheric mantle. Within the southern Brasilia belt, fast split shear waves are polarized parallel to the structural trend of the belt, at a high angle from the APM. Although part of our data set strongly favors an origin of anisotropy related to a fabric frozen in the lithospheric mantle since the Neoproterozoic, a contribution of the asthenospheric flow related to the present day plate motion is also required to explain the observed splitting parameters.
ISSN: 0012-821X

hal-01389116
http://hal.univ-reunion.fr/hal-01389116
http://hal.univ-reunion.fr/hal-01389116/document
http://hal.univ-reunion.fr/hal-01389116/file/Heintz_SKS_Brazil_EPSL2003_hal.pdf
DOI : 10.1016/S0012-821X(03)00163-8

Éditeur(s) : HAL CCSD
Résumé : National audience
Crustal-scale models for the Pyrenees based on ECORS reflection profileshave around 20 years now. In recent years, new understandingswere gained on the reconstruction to the preorogenic times, namelya scenario of extreme crustal attenuation and mantle exhumation ; inturn, this has implications on the interpretation of the present-day structure,as new models for the chain must consider feedbacks between themid-Cretaceous hyperextension and the Pyrenean inversion. On the WcentralPyrenean traverse, the southern part comprises 3 S-vergent basementthrust units, the Lakora, Gavarnie and Guarga units, flanked by thedetached cover of the Jaca piggyback basin and the Ebro basin, wherethe Mesozoic is thin and Late Cretaceous-Tertiary synorogenic carbonateand detrital sequences record a southward depocenter migration.To the N, the Chaînons Béarnais belt (CB) is a system of Jurassic to LowerCretaceous carbonate anticline ridges separated by synclines withthick Albian-Cenomanian flysch, covered to the north by Upper Cretaceousflysch sequences. The CB is thrust southwards together with theLakora thrust unit and northwards onto the Aquitaine basin. CB foldinglargely results from the rising and squeezing of diapirs initiated duringthe Jurassic-Early Cretaceous extension. Pieces of crust and mantle liftedin the diapirs attest that the CB derive from a Cretaceous domainof hyperextended continental crust and exhumed mantle. Moho reflectionsin the ECORS-Arzaq profile constrain the present deep structure.Restoration leads to a Mesozoic cover detachment over the N-Iberianand S-European margins. Inversion began by subduction of the exhumedmantle and folding and pop-up thrusting of the CB cover onto themargins. From the mid-late Eocene onwards, continental collision wasaccommodated by wedging and thrust stacking in the Iberian crust, involvingthe piggyback formation of S-vergent basement thrusts in theupper crust, and the northward subduction of the lower crust.
24 ème Réunion des sciences de la Terre 2014
Pau, France

insu-01080831
https://hal-insu.archives-ouvertes.fr/insu-01080831

Éditeur(s) : HAL CCSD Wiley-Blackwell
Résumé : International audience
A comprehensive model for the activity of the elementary accretion segment at fast-spreading ridges relies on integration of structural data from the Oman ophiolite and geophysical results from the East Pacific Rise (EPR) around 9°N, which are of comparable size and spreading rates. The axial melt lens at shallow crustal level provides a link between Deval segmentation at the seafloor and a lower melt sill at Moho level, imaged at the EPR as a crustal melt zone (CMZ) and mapped in Oman as the Moho transition zone (MTZ). Both are attached to a mantle upwelling at the EPR, and to a frozen diapir in Oman. The physical link between diapiric mantle uprising at the Moho and Devals segmentation at the seafloor is the melt being injected from the mantle into the lower MTZ, ponding there, and then being released by powerful injections into the upper melt lens. The magma chamber covers the diapir at a distance of 5 km from the ridge axis.
ISSN: 0954-4879

hal-01171958
https://hal.archives-ouvertes.fr/hal-01171958
DOI : 10.1111/ter.12137

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
The Ronda peridotite massif in Southern Spain shows a well-defined 'recrystallization' front that separates a large-scale partial melting domain formed at the expense of the continental lithospheric mantle from a 'preserved' lithospheric domain. To investigate the processes allowing a transient lithosphere-asthenosphere boundary to propagate in the lithospheric mantle, we performed a joint petrostructural and geochemical study of an similar to 2.5 km(2) zone extending from the melting front to the mylonites that mark the western limit of the massif. This study emphasizes a feedback between heat transfer, melt percolation, and deformation in the lithospheric mantle. Petrographical observations and geochemical data show that heterogeneous reactive percolation of melts produced in the underlying partial melting domain led to refertilization of lithospheric peridotites up to 1.5 km ahead from the melting front, producing metre-scale layering of fertile and refractory mantle rocks. Within 800 m from the front, pre-existing garnet pyroxenite layers were partially molten and the resulting melts probably contributed to the refertilization process. Detailed structural mapping and analysis of the microstructures and crystal preferred orientations highlight the relations between reactive melt transport and deformation, and the control of the temperature gradient on both processes. Parallelism between the recrystallization front, compositional boundaries, and deformation structures, as well as variations in the deformation intensity of pyroxenes and spinels, suggest syn- to late-tectonic melt transport controlled by both the deformation and the thermal gradient. Variations in the strength of olivine crystal preferred orientations as a function of the modal and chemical composition of the spinel tectonites point to a higher contribution of diffusion to deformation in the most fertile rocks, corroborating the hypothesis that deformation occurred in presence of melt. Finally, the systematic dispersion of olivine [100] and orthopyroxene [001] axes in the foliation plane suggests a dominantly transpressive deformation regime.
ISSN: 0022-3530

hal-00420904
https://hal.archives-ouvertes.fr/hal-00420904
DOI : 10.1093/petrology/egp032

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Subduction infancy corresponds to the first few million years following subduction initiation, when slabs start their descent into the mantle. It coincides with the transient (yet systematic) transfer of material from the top of the slab to the upper plate, as witnessed by metamorphic soles welded beneath obducted ophiolites. Combining structure–lithology–pressure–temperature–time data from metamorphic soles with flow laws derived from experimental rock mechanics, this study highlights two main successive rheological switches across the subduction interface (mantle wedge vs. basalts, then mantle wedge vs. sediments; at ∼800 °C and ∼600 °C, respectively), during which interplate mechanical coupling is maximized by the existence of transiently similar rheologies across the plate contact. We propose that these rheological switches hinder slab penetration and are responsible for slicing the top of the slab and welding crustal pieces (high- then low-temperature metamorphic soles) to the base of the mantle wedge during subduction infancy. This mechanism has implications for the rheological properties of the crust and mantle (and for transient episodes of accretion/exhumation of HP-LT rocks in mature subduction systems) and highlights the role of fluids in enabling subduction to overcome the early resistance to slab penetration.
ISSN: 0012-821X

hal-01383368
http://hal.upmc.fr/hal-01383368
http://hal.upmc.fr/hal-01383368/document
http://hal.upmc.fr/hal-01383368/file/Agard_2016_Plate_interface.pdf
DOI : 10.1016/j.epsl.2016.06.054

Éditeur(s) : HAL CCSD Elsevier Masson
Résumé : International audience
We provide new constraints on the modes of mantle exhumation and denudation in the pre-orogenic Pyrenees by investigating the poorly known peridotites located east of the Lherz body, in eastern Ariè ge (Vicdessos, Urs, Bestiac, Caussou and Prades main peridotitic bodies). We show that: (1) numerous peridotite bodies, not described so far, are constituted by decametric to sub-metric outcrops scattered between and around the main outcrops identified by Monchoux (1970); (2) most of the peridotites form blocks and lenses of various sizes, from millimetric monocrystalline grains to hectometric olistoliths, embedded in debris flows involving mainly Mesozoic metasediments; these peridotites can therefore be linked to the S-type peridotites of Lagabrielle et al. (2010), and share similarities with the peridotites of Lherz region (Clerc et al., 2012). All originated from tectono-sedimentary processes associated with mantle exhumation in relation with extreme thinning and breakoff of the continental basement; (3) the various petrographic characters of these peridotites and their heterogeneity in serpentinisation degree imply a peculiar mode of exhumation, which merges mantle fragments inherited from different structural levels; (4) the lack of tectonic structures such as faults and shear planes associated with the ultramafic-rich breccia formation and the presence of neoformation of metamorphic minerals within the matrix preclude their origin as cataclasites related to the Latest Cretaceous and Tertiary Pyrenean contractional deformation. The peridotites of eastern Ariè ge are indisputable witnesses of the presence of an inverted hyper-extended Cretaceous passive margin forming the current North Pyrenean zone. The geometry of the extensional system was complex and probably associated with strike-slip faults and transcurrent motion. ß 2016 The Authors. Published by Elsevier Masson SAS on behalf of Acadé mie des sciences. This is an open access article under the CC BY-NC-ND license (http://creativecommons. org/licenses/by-nc-nd/4.0/).
ISSN: 1631-0713

Droits : http://creativecommons.org/licenses/by-nc-nd/
insu-01280502
https://hal-insu.archives-ouvertes.fr/insu-01280502
https://hal-insu.archives-ouvertes.fr/insu-01280502/document
https://hal-insu.archives-ouvertes.fr/insu-01280502/file/1-s2.0-S1631071316000043-main.pdf
DOI : 10.1016/j.crte.2015.12.003

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
In Western Mediterranean, the Rif belt in Morocco is part of the Gibraltar Arc built during the Tertiary in the framework of Eurasia-Africa convergence. The structural and metamorphic evolution of the internal units of this belt as well as their timing, crucial to constrain the geodynamic evolution of the Alboran Sea, is still largely debated.Our study on the Ceuta Peninsula (Northern Rif) provides new structural, petrological and geochronological data (U-Th-Pb, Ar-Ar), which allow to precise the tectono-metamorphic evolution of the Lower Sebtides metamorphic units with:(1) a syn-metamorphic thrusting event developed under granulite facies conditions (7–10 kbar and 780–820 °C). A major thrust zone, the Ceuta Shear Zone, drove the emplacement of metapelites and peridotitic lenses from the Ceuta Upper Unit over the orthogneisses of the Monte Hacho Lower Unit. This compressional event ended during the Upper Oligocene.(2) an extensional event developed at the boundary between amphibolite and greenschist facies conditions (400–550 °C and 1–3 kbar). During this event, the Ceuta Shear Zone has been reactivated as a normal fault. Normal ductile shear zones contributed to the final exhumation of the metamorphic units during the Early Miocene.We propose that the compressional event is related to the formation of an orogenic wedge located in the upper plate, in a backward position, of the subduction zone driving the geodynamic evolution of the Alboran domain. In this context, the episode of lithospheric thinning could be related to the opening of the Alboran basin in a back-arc position.Furthermore, unlike the previous models proposed for the Rif belt, the tectonic coupling between mantle peridotites and crustal metamorphic rocks occurred in Ceuta Peninsula at a depth of 20–30 km under high temperature conditions, before the extensional event, and thus cannot be related to the back-arc extension.
ISSN: 0040-1951

insu-01682810
https://hal-insu.archives-ouvertes.fr/insu-01682810
DOI : 10.1016/j.tecto.2017.11.028

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
During the last decade, the interaction of deep processes in the lithosphere and mantle with surface processes (erosion, climate, sea-level, subsidence, glacio-isostatic readjustment) has been the subject of heated discussion. The use of a multidisciplinary approach linking geology, geophysics, geodesy, modelling, and geotechnology has led to the awareness of coupled deep and surface processes. Deep earth dynamics (topography, erosion, tectonics) are strongly connected to natural hazards such as earthquakes, landslides, and tsunamis; sedimentary mass transfers have important consequences on isostatic movements and on georesources, geothermal energy repartitions. The ability to read and understand the link between deep Earth dynamics and surface processes has therefore important societal impacts. Ground-truthing at carefully-selected sites of investigation is imperative to better understand these connections.Due to its youth (<30 Ma) and its subsidence history, the almost land-locked Gulf of Lion–Sardinia continental margins system provides a unique record of sedimentary deposition from the Miocene to present. Due to its high subsidence rate, palaeoclimatic variations, tectonic events and vertical evolution are all recorded here at very high resolution. The late Miocene isolation and desiccation of the Mediterranean, the youngest and most catastrophic event, the Messinian Salinity Crisis (MSC), induced drastic changes in marine environments: widespread deposition of evaporite (gypsum, anhydrite and halite) in the central basin, and intense subaerial erosion along its periphery. These extraordinary mass transfers from land to sea induced strong isostatic re-adjustments that are archived in the sedimentary record and represent a window to the lithospheric rheology and the deep processes.The GOLD (Gulf of Lion Drilling) project, proposes to explore this unique sedimentary record as well as the nature of the deep crustal structure, providing valuable information about the mechanisms underlying vertical motions in basins and their margins.
ISSN: 0264-8172

insu-01197393
https://hal-insu.archives-ouvertes.fr/insu-01197393
https://hal-insu.archives-ouvertes.fr/insu-01197393/document
https://hal-insu.archives-ouvertes.fr/insu-01197393/file/Rabineau%20et%20al.-final-MPG2014_REVISED-FINAL-No-Marked_FINAL%2BFigures.pdf
DOI : 10.1016/j.marpetgeo.2015.03.018

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
This paper provides a synthesis of current data and interpretations on the crustal structure of the Pyrenean-Cantabrian orogenic belt, and presents new tectonic models for representative transects. The Pyrenean orogeny lasted from Santonian (~84 Ma) to early Miocene times (~20 Ma), and consisted of a spatial and temporal succession of oceanic crust/exhumed mantle subduction, rift inversion and continental collision processes at the Iberia-Eurasia plate boundary. A good coverage by active-source (vertical-incidence and wide-angle reflection) and passive-source (receiver functions) seismic studies, coupled with surface data have led to a reasonable knowledge of the present-day crustal architecture of the Pyrenean-Cantabrian belt, although questions remain. Seismic imaging reveals a persistent structure, from the central Pyrenees to the central Cantabrian Mountains, consisting of a wedge of Eurasian lithosphere indented into the thicker Iberian plate, whose lower crust is detached and plunges northwards into the mantle. For the Pyrenees, a new scheme of relationships between the southern upper crustal thrust sheets and the Axial Zone is here proposed. For the Cantabrian belt, the depth reached by the N-dipping Iberian crust and the structure of the margin are also revised.The common occurrence of lherzolite bodies in the northern Pyrenees and the seismic velocity and potential field record of the Bay of Biscay indicate that the precursor of the Pyrenees was a hyperextended and strongly segmented rift system, where narrow domains of exhumed mantle separated the thinned Iberian and Eurasian continental margins since the Albian-Cenomanian. The exhumed mantle in the Pyrenean rift was largely covered by a Mesozoic sedimentary lid that had locally glided along detachments in Triassic evaporites. Continental margin collision in the Pyrenees was preceded by subduction of the exhumed mantle, accompanied by the pop-up thrust expulsion of the off-scraped sedimentary lid above. To the west, oceanic subduction of the Bay of Biscay under the North Iberian margin is supported by an upper plate thrust wedge, gravity and magnetic anomalies, and 3D inclined sub-crustal reflections. However, discrepancies remain for the location of continent-ocean transitions in the Bay of Biscay and for the extent of oceanic subduction. The plate-kinematic evolution during the Mesozoic, which involves issues as the timing and total amount of opening, as well as the role of strike-slip drift, is also under debate, discrepancies arising from first-order interpretations of the adjacent oceanic magnetic anomaly record.
ISSN: 0040-1951

insu-01683989
https://hal-insu.archives-ouvertes.fr/insu-01683989
https://hal-insu.archives-ouvertes.fr/insu-01683989/document
https://hal-insu.archives-ouvertes.fr/insu-01683989/file/teixell-tectono-2018.pdf
DOI : 10.1016/j.tecto.2018.01.009

Éditeur(s) : HAL CCSD
Résumé : Joint inversions are now commonly used in Earth Sciences. They have been developed to better understand Earth structure since they provide more constraints on the inverted parameters. We propose a new process to simultaneously invert several data sets in order to better image 3-D crustal and upper mantle structures. Our inversion uses 3 kind of data which present a good complementarity : (1) P receiver functions to provide Moho depth variations, (2) teleseismic delay times of P waves to retrieve velocity anomalies in the crust and upper mantle, (3) gravity anomalies to image density variations at lithospheric scale. In our scheme, receiver functions are first inverted. The resulting Moho depths are then interpolated and incorporated as a priori information into the joint inversion of teleseismic delay times and gravity anomalies process. In our new approach, we perform a model space search for Moho variations, P-velocity and density structure to find acceptable fit to the three data sets. In order to preferentially sample the good data fit region, we chose the Neighborhood algorithm of Sambridge to optimistically survey the model space. We model the delay times with a 3-D raytracing using velocity nodes evenly spaced and linked with density nodes via a linear relationship. This relationship can evolve through depth, simulating its pressure dependance. We test our scheme on synthetic examples, and apply the method in a continental rifting region where deformation processes are complex and badly known. This joint inversion thus provides more constraints on the inverted parameters, and allows us to better image crust - mantle interactions in the case of the Hangai dome (Central Mongolia). Indeed, in this area, we expect an asthenospheric upwelling to dynamically support the topography, but we image a density - velocity anomaly in the lower crust. The effects on topography and the origin (composition vs. thermal) of this anomaly are still under debate.
Les inversions conjointes sont maintenant communément utilisées en Sciences de la Terre. Elles ont été développées afin d'améliorer notre connaissance et compréhension de la structure interne de la Terre puisqu'elles apportent de plus en plus de contraintes sur les paramètres inversés. Dans cette thèse, nous proposons un nouveau processus d'inversion conjointe qui prend en compte trois paramètres différents et qui mène à l'obtention d'un modèle lithosphérique tridimensionnel. Notre méthode utilise trois types de données gravimétriques et sismologiques qui présentent une bonne complémentarité : (1) Les fonctions récepteur P afin d'obtenir les variations de profondeur du Moho, (2) les délais de temps d'arrivées P des téléséismes pour retrouver les anomalies de vitesse dans la croûte et le manteau supérieur, (3) les anomalies gravimétriques qui donnent accès aux variations de densité à l'échelle lithosphérique. Dans le schéma d'inversion proposé, nous inversons d'abord les fonctions récepteur. Les variations de profondeur du Moho qui en résultent sont alors interpolées puis incorporées comme information a priori dans le processus d'inversion conjointe gravimétrie - tomographie télésismique. Que ce soit pour les fonctions récepteur ou pour la partie conjointe, notre méthode d'inversion se base sur un algorithme de recherche afin de trouver la structure qui minimise l'écart aux trois types de données. Nous avons opté pour l'algorithme de voisinage qui présente l'avantage de concentrer sa recherche dans les régions qui minimisent l'écart aux données sans toutefois abandonner les autres régions afin de limiter les risques de convergence vers un minimum local. Nous utilisons un modèle 3-D constitué de noeuds de vitesse afin de modéliser les délais de temps. Ces noeuds de vitesse sont liés aux noeuds de densité grâce à une relation linéaire entre vitesse et densité. Cette relation peut évoluer avec la profondeur de manière à simuler les effets dus aux variations de pression. Nous avons réalisé plusieurs tests synthétiques afin d'évaluer le comportement de notre nouvelle méthode. Ils ont permis de montrer que les variations du Moho ainsi que les anomalies de vitesse et densité sont bien retrouvées. Ils ont également montré l'importance de la prise en compte de ces trois types de données dans un même schéma d'inversion, notamment en ce qui concerne la faculté de discerner les variations d'interfaces des anomalies volumiques. Nous avons ensuite appliqué la méthode dans une région continentale en phase de rifting où les processus de déformation sont complexes et mal connus. Notre nouvelle méthode a apporté davantage de contraintes sur les paramètres inversés et a permis d'obtenir un modèle correctement résolu de la croûte et du manteau supérieur sous le dôme de Hangai (Mongolie Centrale). Une anomalie asthénosphérique sous le dôme est souvent invoquée pour expliquer sa topographie élevée mais c'est une anomalie (en vitesse et densité) crustale (croûte inférieure) qui s'exprime dans nos modèles. Ses effets sur la topographie et son origine (compositionnelle et/ou thermique) sont encore débattus et nécessiteraient des études plus poussées (paramétriques, VP =VS, ...).
https://tel.archives-ouvertes.fr/tel-00783524

tel-00783524
https://tel.archives-ouvertes.fr/tel-00783524
https://tel.archives-ouvertes.fr/tel-00783524/document
https://tel.archives-ouvertes.fr/tel-00783524/file/Basuyau2011.pdf