Éditeur(s) : Université de Paris 7
Résumé : The Seine estuary and its adjacent region Pays de Caux are two significant sources of mercury for coastal marine environments. It is carried through fluvial means for the Seine bay and through karstic fresh water emergences for Pays de Caux's coastal area. Mercury cycle in the Seine estuary and bay is affected by additional anthropical activities. The estuary's maximal turbidity area acts like a trap and a chemical reactor for fluvial mercury. Within this area, we can confirm: (i) the non conservative behaviour of dissolved mercury; (ii) mercury enrichment of particles when comparing the Seine's and marine environment and we suggest mercury particle redistribution from the organic fraction to the oxyhydroxydes fraction. A large fraction of mercury is exported in this state towards coastal areas. Mercury reduction in surface coastal waters and its atmospherical recycling are major phenomena. Photoreduction and biological reduction play quantitative roles equivalent to total mercury recycling via the atmosphere corresponding approximately to 30 % of fluvial exchanges. We are demonstrating that reactive forms of mercury are supporting photoreduction. Mercury behaviour within Pays de Caux's karst depends of the hydrogeological context of the system (time and flow speed, turbidity, flow); regardless of the speciation and/or partition in underground waters, the total amount of mercury in intertidal areas is quantitatively the same as in the Seine estuary. Mercury brought through intertidal emergences (karstic exudations) is not « filtered » by a maximal turbidity area and is more widely bio-available for mussels than in the Seine estuary. Even being free from growth factor influences through simple models, mussels found in Pays de Caux still show one of the highest mercury contamination on the French coast; for the first time this places the emphasis on how much mercury is brought from underground waters to the coastal environment. Surface complexation modelisation tests are able to reproduce the major part of mercury partition in the Seine estuary and bay if a very low mercury exchangeable fraction and minimum complexation parameters are taken into account; thermodynamic calculations also suggest that a strong or highly concentrated « dissolved » ligand must be present in the water in order to compete with chlorocomplex formations and explain our measures.
L'estuaire de la Seine et la région adjacente du Pays de Caux sont deux sources significatives en mercure pour le milieu marin côtier. Les apports sont d'une part fluviatiles en ce qui concerne la Baie de Seine et karstiques via des émergences d'eau douce pour la zone côtière du Pays de Caux. Le cycle du mercure en estuaire et baie de Seine est perturbé par les apports liés aux activités anthropiques. La zone de turbidité maximum de l'estuaire joue le rôle de piège et de réacteur chimique pour le mercure fluviatile. Au sein de cette zone, nous mettons en évidence : (i) un comportement non-conservatif du mercure dissous; (ii) un enrichissement en mercure des particules par rapport à celles de la Seine et du milieu marin et suggérons une redistribution du mercure particulaire de la fraction organique vers la fraction oxyhydroxydes. C'est sous cette forme qu'une fraction importante du mercure est exportée vers la zone côtière. La réduction du mercure dans les eaux côtières de surface et son recyclage atmosphérique sont des phénomènes majeurs. En effet, la photoréduction et la réduction biologique jouent des rôles quantitativement équivalents avec un recyclage total du mercure via l'atmosphère correspondant à environ 30% des apports fluviatiles. Nous montrons que les formes réactives du mercure constituent le substrat de la photoréduction. Le comportement du mercure au sein du karst du Pays de Caux dépend du contexte hydrogéologiques du système (temps et vitesse de circulation, turbidité, débit) ; quelle que soit la spéciation et/ou la partition dans les eaux souterraines, l'apport en mercure total à la zone intertidale est quantitativement du même ordre de grandeur que les apports de la Seine. Le mercure apporté par les émergences intertidales (exutoires karstiques) n'est pas « filtré » par une zone de turbidité maximale et se trouve plus largement biodisponible pour les moules qu'en estuaire de Seine. En s'affranchissant, par des modèles simples, de l'influences des facteurs de croissance, les moules du Pays de Caux affichent toujours une contamination par le mercure parmi les plus élevées du littoral français; ceci met pour la première fois l'emphase sur l'importance de l'apport en mercure par des eaux souterraines dans un environnement côtier. Les essais de modélisation de complexation de surface reproduisent la majeure partie de la partition du mercure dans l'estuaire et la baie de Seine si l'on tient compte d'une fraction échangeable en mercure très faible et de paramètres de complexation minimums ; les calculs thermodynamiques suggèrent aussi qu'un ligand « dissous » fort ou présent à de fortes concentrations doit être présent dans l'eau afin d'entrer en compétition avec la formation de chlorocomplexes et expliquer nos mesures.

Droits : info:eu-repo/semantics/openAccess
http://archimer.ifremer.fr/doc/2001/these-1842.pdf
http://archimer.ifremer.fr/doc/00000/1842/

Éditeur(s) : HAL CCSD Mineralogical Society of America
Résumé : International audience
Accessory phases are important hosts of trace elements; allanite may contain >90% of the REE in a bulk rock. The mobility and redistribution of several trace elements, notably HREE, Th, U, and Y is thus controlled by reactions involving allanite and other REE phases, as well as several rock-forming minerals. As these elements are commonly concentrated in mature elastic sediments, a suite of impure quartzite was studied. Two eclogite facies samples from the Monometamorphic Cover Complex of the Sesia Zone (Western Italian Alps) are presented in some detail, as they reveal a remarkably rich spectrum of reaction relationships that involve REE phases.;Two allanite-forming reactions were inferred from textures and phase compositions;(1) monazite + Ca-silicate(?) + fluid -> allanite + apatite + thorite;;(2) monazite + thorite + Ca-silicate(?) + fluid -> Th-rich allanite + auerlite +/- apatite.;Petrographic observations and thermodynamic models suggest that allanite entered the HP assemblage at similar to 530 degrees C and 17-18 kbar during prograde metamorphism.;In one sample, allanite is rimmed by epidote rich in Y and HREE that grew at the expense of xenotime. Two net transfer reactions were derived;(3) xenotime + allanite + fluid -> Y-rich epidote + apatite + thorite;;(4) xenotime + allanite + fluid -> Y-rich epidote + aeschynite + thorite + (phosphate?).;Textural relationships and trace element analyses of coexisting allanite/monazite and xenotime/Y-rich epidote reveal systematic partitioning of the REE. Partition coefficients for the HREE are compatible with equilibrium fractionation, whereas those for the LREE show patterns that seem to be inherited from the precursor phases, in this case zircon with variable LREE composition.
ISSN: 0003-004X

hal-00745674
https://hal.archives-ouvertes.fr/hal-00745674
DOI : 10.2138/am.2012.3832

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The late Carboniferous accretionary system of the South Tianshan orogen (North-Western China) underwent complex structural and polymetamorphic evolution. Combined petrological, geochronological and microstructural analysis of (ultra)high-pressure (UHP) metabasites (eclogites and blueschists) enclosed in metapelites show a relict coarse-grained eclogitic fabric S2 surrounded by a dominant fine-grained eclogite and blueschist facies retrograde fabric S2. The S2 fabric is reworked by upright folds F3 that are responsible for a major shortening of the whole accretionary system. For both the eclogite and blueschist, peak and retrograde P–T conditions have been thermodynamically constrained at 25–26 kbar and 425–500 °C and 10–13 kbar and 500−550 °C respectively, suggesting a shared exhumation history. The garnet-whole rock-amphibole isochron in the blueschist yielded Lu–Hf and Sm–Nd ages of 326.0 ± 2.9 Ma and 318.4 ± 3.9 Ma respectively, interpreted to date the prograde to peak metamorphic assemblage. The retrograde path of the eclogite is characterized by heterogeneous omphacite recrystallization into a mylonitic fine-grained matrix and crystallization of blue amphibole. Microstructures in both pristine porphyroclastic and recrystallized fine-grained domains in the eclogite indicate a gradual evolution from constriction-dominated (L>S-type) to flattening-dominated (S>L-type) type of deformation, increase of fabric intensity reflected by gradually growing M-indexes and the development of lattice preferred orientation (LPO) typical for dislocation creep under slightly hydrated conditions. Recrystallization of the matrix in the blueschist is homogeneous, which indicates a matrix dominated channel flow during exhumation. These LPOs evolutions suggest a significant mechanical coupling with the upper plate concomitant with oroclinal bending of the Kazakh orocline. Lock up of Kazakh orocline is responsible for further stress increase resulting in horizontal shortening of South Tianshan accretionary wedge and development of D3 upright folding and steepening of the whole sequence.
ISSN: 1342-937X

hal-01481263
https://hal.archives-ouvertes.fr/hal-01481263
DOI : 10.1016/j.gr.2016.07.007

Éditeur(s) : Terrapub
Résumé : A series of empirical expressions for predicting gas hydrate stability, its volume fraction out of pore space and gas hydrate mass-density were established in different systems in consideration of gas composition (CH4, C2H6, H2S) and salinity (NaCl, seawater), and pore size at temperature between 273.15 and 300 K, based on our gas hydrate thermodynamic model (Sultan et al., 2004b, c). Six of the developed expressions for predicting gas hydrate stability were validated against the available published experimental data and they were also compared with other models. At temperature 273.15 to 290.15 K, the ARDPs (Average Relative Deviation of Pressures between the prediction and the experimental data) have shown that these empirical expressions are in agreement with the experimental data as well as other models, indicating their reliability of predicting gas hydrate stability for these systems. At higher temperatures, the empirical predictions for gas hydrate stability do not well reproduce the experimental data, because they are based on van der Waals model. The empirical expressions for predicting gas hydrate stability in the systems of CH4 + H2S + H2O, CH4 + seawater + poresize, CH4 + H2S + NaCl and CH4 + CO2 + NaCl, and for evaluating gas hydrate fraction and its density need further validation due to lack of available published experimental data. However, the empirical expressions for gas hydrate fraction and its density show that the effects of pore size and salinity are negligible; gas hydrate fraction will increase if methane concentration continuously increases relatively in excess of methane solubility and decreases with pressure within gas hydrate stability zone, which is well consistent with data of natural gas hydrates in Cascadia; gas hydrate density tends to increase with ethane percentage and decrease with pressure.
Geochemical Journal (0016-7002) (Terrapub), 2008-03 , Vol. 42 , N. 2 , P. 163-175

Droits : 2008 TERRAPUB. The Geochemical Society of Japan.
http://archimer.ifremer.fr/doc/2008/publication-4958.pdf
http://archimer.ifremer.fr/doc/00000/4958/

Éditeur(s) : HAL CCSD European Geosciences Union
Résumé : We propose to assess the error done when temperature is considered as a conservative tracer in fluviokarst studies. As a matter of fact, heat exchanges occur between karstic Conduit System (CS) and Porous Fractured Matrix (PFM) that prevents from using this approximation without caution. The conservative tracer approximation boils down to consider the cooling of CS water by PFM flow in an open thermodynamic system where the CS is bounded by an Adiabatic Wall (AW). The resulting CS water temperature contrasts with the one obtained from more complete models (CW), which also take into account heat conduction within the CS, within the PFM, and from the CS to PFM through CS a Conductive Wall. In order to assess first orders of this error, the dimensionless equations, characteristic of CS cooling by PFM, have been solved thanks to Alternate Finite Difference Implicit methods both in AW and CW configurations. Four groups of dimensionless numbers appear in the various terms of energy and mass equations among which the Peclet and Reynolds numbers depict the large morphologic and hydrologic variability of natural karstic systems. A parametric exploration of the differences between AW and CW models has then been conducted vs. Peclet numbers (Pe numbers varying from 106 to 109, at constant CS Reynolds number) and vs. Reynolds numbers (Red varying from 103 to 107, at constant Peclet number). The error curves bound finite volumes in the Peclet–Reynolds space that converge uniformly to zero for the extreme values of these parameters. However, for Peclet and Reynolds numbers characteristic of realistic fluviokarst configurations, the errors reach finite values, that give first order information assessing the error done by considering temperatures as conservative tracers. Maximum relative errors around 10−2 (in fact 0.0092) have been found varying Pe; while it remained slightly lower than 0.7 × 10−2 varying Red. An illustrative example of the temperature conservative tracer AW approximation is presented with the data obtained from the main morphologic and hydrologic properties of the Cent–Font resurgence (Hérault, France). According to the results, the error reached at the output of the fluviokarst is 0.00613 (for Pe = 1.4993 × 108 and Red = 4.2969 × 104). When rescaled to the physical domain, this error leads to a temperature difference of 1.77 K between the CW and AW configurations.
ISSN: 1812-2108

hal-01358348
https://hal.archives-ouvertes.fr/hal-01358348
https://hal.archives-ouvertes.fr/hal-01358348/document
https://hal.archives-ouvertes.fr/hal-01358348/file/hessd-11-169-2014.pdf
DOI : 10.5194/hessd-11-169-2014

Éditeur(s) : HAL CCSD
Résumé : The mantle deformation processes that control the thinning and break-up of continental lithosphere remain poorly understood. Our knowledge is restricted to either lithospheric scale thermo-mechanical models --that use experimentally derived flow laws--, geophysical imaging and/or rare xenoliths from active continental rifts, such as the East African Rift System. The originality of this work relies on the study of the two largest outcrops of diamond facies subcontinental lithospheric mantle in the world: the Beni Bousera and Ronda peridotite massifs in N Morocco and S Spain, respectively. The structures and petrologic and metamorphic zoning preserved in these massifs --implying a polybaric and polythermal evolution-- provides a unique opportunity to investigate the thermo-mechanical evolution of thick subcontinental lithospheric mantle in extensional settings. In this thesis we studied the deformation mechanisms in both peridotites and pyroxenites to constrain the modes of exhumation of subcontinental lithospheric mantle from garnet-, to spinel-, and finally, to plagioclase lherzolite facies conditions. We combined field mapping of tectonometamorphic domains and structural mapping of ductile structures, microstructural analysis, crystal preferred orientations (CPO) measurements and conventional thermobarometric calculations and thermodynamic modeling (Perple_X) to unravel the pressure and temperature conditions of deformation. We showed that exhumation from garnet- to spinel lherzolite facies conditions was accommodated by fast shearing --in thermal disequilibrium--along a lithospheric scale transtensional shear zone. In this context, the petrological zoning and the large temperature gradient (ca. 100ºC/km) preserved in the Beni Bousera massif represent the mechanical juxtaposition of progressively deeper and hotter lithospheric levels at depths of ca. 60 km in the latest Oligocene (ca. 25 Ma). Final exhumation from spinel- to plagioclase facies lherzolite and emplacement into the crust is best recorded in the Ronda massif where it occurred by inversion and lithospheric scale folding of the highly attenuated continental lithosphere in a back-arc region, probably in relation with southward slab rollback and subsequent collision with the palaeo-Maghrebien passive margin in the early Miocene (21-23 Ma).
Les processus de déformation contrôlant l'amincissement de la lithosphère continentale sont encore mal contraints. Nos connaissances sont principalement basées sur la modélisation thermomécanique d'extension à l'échelle de la lithosphère--utilisant des lois rhéologiques derivées expérimentalement, l'imagerie géophysique et l'analyse de xénolithes provenant de rift continentaux actifs à ce jour, tels que le Rift Est-Africain. L'originalité de ce travail reside dans l'étude des deux plus grands massifs de péridotites sous-continentales ayant enregistrées des conditions primaires du facies à diamant: les massifs de Beni Bousera au nord du Maroc et de Ronda au sud de l'Espagne, respectivement. Les structures et la zonation petrologique et métamorphique --impliquant une évolution polybarique et polythermique-- préservéees dans ces massifs offrent une opportunité unique pour étudier l'évolution thermo-mécanique du manteau sous-continental dans un contexte extensif. Dans ce travail, nous avons étudié les mécanismes de déformation des péridotites et des pyroxénites afin de contraindre les modes d'exhumation du manteau lithosphérique sous-continental, depuis des conditions du facies des lherzolites à grenat, jusqu'au facies à spinelle et enfin à plagioclase. Nous avons combiné la cartographie des faciès tectono-métamorphiques et des structures ductiles de déformation, l'analyse des microstructures, la mesure d'orientations préférentielles de réseau (OPR), et la géothermobarométrie conventionelle couplée à la modélisation thermodynamique (PerpleX) afin de contraindre les conditions de pression et température de la déformation. Nous avons montré que l'exhumation précoce du facies à grenat au facies à spinelle était accomodée par une faille transtensive affectant le manteau lithosphérique. Dans ce contexte, la zonation tectono-métamorphique et le gradient thermique important (ca. 100ºC/km) préservés à Beni Bousera résultent de la juxtaposition mécanique de domaines lithosphériques initialement équilibrés à différentes pressions et températures, fossilisée à une profondeur de ca. 60 km durant l'Oligocène supérieur (ca. 25 Ma). L'exhumation finale du facies de lherzolite à spinelle au facies à plagioclase et l'emplacement final dans la croûte, mieux enregistrés dans Ronda, se sont produits par inversion et plissement de la section lithosphérique fortement amincie dans un contexte arrière-arc, probablement lors du retrait vers le sud de la lithosphère subduite et la collision de l'arc avec les paléo-marges maghrébines au Miocène inférieur (21-23 Ma).
https://tel.archives-ouvertes.fr/tel-00767700

tel-00767700
https://tel.archives-ouvertes.fr/tel-00767700
https://tel.archives-ouvertes.fr/tel-00767700/document
https://tel.archives-ouvertes.fr/tel-00767700/file/THESE_Frets.pdf

Éditeur(s) : HAL CCSD
Résumé : International audience
The purpose of our study is to model a geothermal reservoir. When geothermal reservoir are assumed to be composed of pure water, the transfer of mass and energy is classically described by two balance equations: mass balance equation and the energy balance equation. In addition to those equations, fluid velocity ist classically given by the Darcy law while thermodynamic properties, inferred from theoretical or empirical equations of state, are used to close the mathematical system. Once this system is closed, there exist different solutions. The first one is to solve for pressure and temperature with a variable switch to saturation in the two-phase region (e.g. TOUGH2). The second one is to solve for pressure and enthalpy to increase stability of phase transition between single and two-phase states (e.g. Hydrotherm). We adopted the second option and chose te use a splitting method to get rid of the complexity of coupling equations and a finite volume method for the spatial discretization. Selecting object-oriented languages, we developed a multi-language framework, combining Python, Fortran and a C++ implementation of IAPWS (from the freesteam project) including the supercritical equations, in porous media velocity is given by Darcy law and to close the system physical properties are determined by the IAPWS-IF97 thermodynamic formulation. We resolve the equations in pressure and enthalpy instead of pressure and temperature in order to increase stability and to handle easier the passage from a single-phase to a two-phase system. We solve the system by using a splitting method - to get rid of the complexity of coupling equations - and a finite volume method. We offer some freedom to users thanks to the implementation of several methods like explicit or implicit Euler, Runge-Kutta or BDF2 for time solvers or GMRES and BICGSTAB for the linear solver. We can handle several boundary conditions like no-flow - describing a boundary which can not exchange matter with the exterior - or like a mixed-therm condition - a Dirichlet condition to the pressure and a Dirichlet or an outflow condition to the temperature in order to describe a recharge or a discharge zone - ... We're developing a multi-language framework, combining Python, Fortran and the C++ implementation of IAPWS (from the freesteam project). All these languages are object-oriented. We've applied this simulation model to the dogger in Paris, France, to several one-dimensional systems and a two-dimensional one made by Coumou with the CSMP++ platform. The dogger is a reservoir exploited to produce heat by pumping water at 70 and reinjecting it in the reservoir at 40. In the one-dimensional systems we wanted to observe the process of heat transfer from a higher temperature boundary to a smaller one in a high-energy domain. The last simulation shows the natural convection of water in a fault. For every simulation we compared the solutions we found with an other code (TOUGH2 or CSMP++) and they agreed. The next step will be to model the geothermal plant in Guadeloupe, West Indies. It's the only place in France - and in the West Indies so far - producing electricity with the earth power. The temperature can reach up to 1000 and the pressure range is around a few hundreds MPa. In some surface zones we can see two-phase water at atmospheric pressure. In the 1980s Bouillante was a laboratory for France. Since 1995 Bouillante has given 30GWh electricity a year to the Guadeloupeans.
PROCEEDINGS, Thirty-Ninth Workshop on Geothermal Reservoir Engineering
Stanford, United States

Droits : info:eu-repo/semantics/OpenAccess
hal-00944133
https://hal-brgm.archives-ouvertes.fr/hal-00944133
https://hal-brgm.archives-ouvertes.fr/hal-00944133/document
https://hal-brgm.archives-ouvertes.fr/hal-00944133/file/Copol.pdf

Éditeur(s) : HAL CCSD
Résumé : Geological storage of CO2 is one of diverse technologies being explored to reduce atmospheric carbon fromindustrial processes (i.e. fossil fuel combustion). One of the specific features of CO2 injection is the possibility ofgeochemical reactions (dissolution – precipitation) between mobile reactive brine (e.g. formation water enrichedin CO2) and the host rock during the spatial and temporal evolution of CO2. That leads to modifications in thepore structure, which in turn change the flow dynamics of the reservoir (e.g. the permeability k). Then, thesesstructural modifications can largely control the injectivity, so that the pressure field in the reservoir and also theCO2 propagation. Accordingly, it is crucial to explore the changes in the reservoir properties (e.g. structural andhydrodynamic) induced during a CO2 injection and specially the relationships between them (e.g. k or reactivesurface-Sr versus porosity-φ , k versus rock heterogeneity), for developing predictive modelling tools of thetransport and reaction processes occurring during a CO2 injection and reliable risk assessment. In the case ofcarbonate rocks, the application of the predictive models of transport and reaction is still challenging, because oftheir high heterogeneity so that the incertitude in the reaction kinetics of carbonate minerals.From this perspective, we realized brine-enriched in CO2 percolation experiments through carbonate rocksamples in thermodynamic conditions expected during CO2 injection in deep reservoirs (T = 100°C et P =12MPa). The permeability changes k(t) is monitored during the experiments and the porosity variationφ (t) iscalculated from chemical analyses of the sampled outlet fluids, using ICP-EAS. The pore structure modificationsare investigated from high resolution X ray micro tomography images acquired from the synchrotron ofGrenoble (ESRF). Depending to the dissolution regime, controlled by the reservoir rock fabric and the chemicalcomposition of the brine (e.g. PCO2), we observed that a modification of pore structure can either improve(atypical result in dissolution context) or impair the value of the permeability k.
Le stockage géologique du CO2 est l’une des diverses technologies étant explorées afin deréduire les émissions de carbone atmosphérique des processus industriels (i.e. combustion del’énergie fossile). L’une des spécifiques caractéristiques de l’injection du CO2 en profondeurreste la possibilité de réactions géochimiques (dissolution-précipitation) entre la saumureréactive mobile (e.g. eau de formation enrichie en CO2) et la roche encaissante durantl’évolution spatiale et temporelle du CO2, conduisant à des modifications dans la structure despores et par conséquent dans les propriétés d’écoulement du réservoir (e.g. la perméabilité k).Donc, ces changements structuraux peuvent largement contrôler l’injectivité, ainsi que lechamp de pression dans le réservoir et aussi la propagation du CO2. Il demeure ainsi cruciald’explorer les changement dans les propriétés de réservoirs (e.g. structurales ethydrodynamiques) induits durant une injection de CO2 et explicitement les relations existantesentre eux (e.g. k ou surface réactive-Sr versus porosité-φ , k versus hétérogénéité de la roche),afin de développer des outils de modélisation prédictive des processus de transport etréactionnels se produisant durant une injection de CO2 et d’évaluer de façon fiable les risques.Dans le cas des réservoirs carbonatés, l’application des modèles prédictifs de transport réactifdemeure toujours un enjeu, car contrainte par la forte hétérogénéité en leur sein ainsi que parl’incertitude dans la cinétique de réactions des minéraux carbonatés dans ce contexte. Danscette optique, nous avons réalisé des expériences de percolation à travers des échantillons deroches carbonatées dans les conditions thermodynamiques de stockage en profondeur (T =100°C et P =12 MPa). L’évolution de la perméabilité k(t) est suivie au cours desexpériences ; et la variation de la porosité φ (t) est calculée à partir des résultats d’analyseschimiques au ICP-AES des fluides de sortie échantillonnés. L’investigation des modificationsapportées à la structure des pores est réalisée par le biais de la Micro-Tomographie hauterésolution à rayon X, acquise au synchrotron de Grenoble (e.g. ESRF).Dépendant du régime de dissolution, contrôlé par la fabrique de la roche réservoir et lacomposition chimique de la saumuré chargée en CO2 (e.g. PCO2 engagée), on a observéqu’une modification de la structure de la roche peut soit améliorer soit détériorer (résultatatypique en contexte de dissolution) la valeur de la perméabilité k.
https://hal.archives-ouvertes.fr/tel-01142136

tel-01142136
https://hal.archives-ouvertes.fr/tel-01142136
https://hal.archives-ouvertes.fr/tel-01142136/document
https://hal.archives-ouvertes.fr/tel-01142136/file/thesemangane2013.pdf

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Melt generation in the continental crust is thought to significantly influence seismic bulk velocities and anisotropy, although existing laboratory data provide limited constraints on such seismic attributes. In this study we measured ultrasonic compressional wave speeds (Vp) and anisotropy during sample compaction, mica-breakdown and melt-generation in synthetic, foliated quartz–muscovite aggregates. Measurements were performed at peak conditions of 300 MPa hydrostatic confining pressure and 750 °C, over a six hour time period, for three separate samples where wave propagation directions were aligned at 0°, 45° and 90° with respect to the foliation plane. The experiments are initially marked by sample compaction and rapid reduction in porosity (from 25% to <2 vol%), with a corresponding increase in Vp. During initial stages of the experiment Vp ranges from 4.65 to 5.45 km/s, depending on the direction of the P wave propagation, resulting in up to ∼16% anisotropy, which originates mainly from the preferred orientation of muscovite and possible incipient melt lenses oriented parallel to foliation. As the experiment progresses the bulk Vp decreases gradually and Vp anisotropy drops from ∼16% to ∼2% after five hours into the experiment. The drop in anisotropy is caused by muscovite-breakdown and increasing amount of partial melting of the aggregate. The bulk velocities are considerably lower than predicted for a mixture of muscovite and β-quartz (stable at 300 MPa and 750 °C). Thermodynamic modeling indicates that mica breakdown and production of melt with ∼2 wt% dissolved water in the aggregate can explain the low Vp, even though β-quartz is stable; the modeled Vp is ∼4.75 km/s at 300 MPa and 750 °C. These ultrasonic attributes signify movement of the melt to fill vacant pores and coating grain boundaries, effectively connecting melt films and reducing seismic anisotropy. The results may apply to regions where crustal melting is on-going, in particular regions of elevated temperature that are only weakly deforming, with coupled anomalously low bulk velocities and seismic anisotropy.
ISSN: 0012-821X

hal-01243569
https://hal.archives-ouvertes.fr/hal-01243569
DOI : 10.1016/j.epsl.2015.05.039

Éditeur(s) : HAL CCSD
Résumé : International audience
Understanding subduction rheology in both space and time has been a challenge since the advent of plate tectonics. We herein focus on "subduction infancy", that is the first ~1-5 My immediately following subduction nucleation, when a newly born slab penetrates into the upper plate mantle and heats up. The only remnants of this critical yet elusive geodynamic step are thin metamorphic soles, commonly found beneath pristine, 100-1000 km long portions of oceanic lithosphere emplaced on continents (i.e., ophiolites).Through the (i) worldwide compilation of pressure-temperature conditions of metamorphic sole formation augmented by pseudosection thermodynamic modeling, (ii) calculations of the viscosity of materials along the plate interface and (iii) generic numerical thermal models, we provide a conceptual model of dynamic plate interface processes during subduction infancy (and initiation s.l.).We show in particular how major rheological switches across the subduction interface control slab penetration, and the formation of metamorphic soles. Due to the downward progression of hydration and weakening of the mantle wedge with cooling, the lower plate (basalt, sediment) and the upper plate (mantle wedge) rheologies equalize and switch over a restricted temperature-time-depth interval (e.g., at ~800°C and ~1 GPa, during 0.1-2 My, for high-temperature metamorphic sole formation). These switches result in episodes of maximum interplate mechanical coupling, thereby slicing the top of the slab and welding pieces (basalt, sediment) to the base of the mantle wedge. Similar mechanical processes likely apply for the later, deeper accretion and exhumation of high-temperature oceanic eclogites in serpentinite mélanges, or for the accretion of larger tectonic slices.This model provides constraints on the effective rheologies of the crust and mantle and general understanding, at both rock and plate scale, for accretion processes and early slab dynamics.
AGU Fall Meeting 2015
San Francisco, United States

insu-01242103
https://hal-insu.archives-ouvertes.fr/insu-01242103

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
Highly restitic rocks from the Antananarivo Block in northern Madagascar are investigated in this study in order to unravel processes of H2O-rich biotite formation in HT rocks. Polyphase metamorphism and melt migration occurred at 0.6 GPa and 850 °C. Biotite remains stable together with orthopyroxene and makes up to 45 vol% of the rock. In addition, three well-characterised and delimited microdomains having different textural, chemical and petrological characteristics are preserved. Thermodynamic models using the specific bulk compositions of the domains are in agreement with petrological observations. These rocks provide evidence that the lower crust may be strongly heterogeneous, locally associated to the formation of hydrous restites controlled by episodes of melt production and melt escape. This has significant consequences for understanding of the lower crust.
ISSN: 1437-3254

hal-01356313
https://hal.archives-ouvertes.fr/hal-01356313
DOI : 10.1007/s00531-015-1265-0

Éditeur(s) : HAL CCSD
Résumé : International audience
The injection of reactive mineral suspensions is a possible process to either reinforce or seal wells in geologic carbon sequestration sites. Among others, olivine slurries could be used as CO2-triggered cements, as they carbonate under the thermodynamic conditions of deep storage. However, injection of such slurries requires to control their initial fluidity and its evolution during the displacement. For this purpose, we have characterized the rheological evolution of olivine suspensions, of particle sizes 1−10 μm, sheared at 100 s−1, in the ranges of 10−40% for the volume fractions, 20−50 bars for the CO2 pressure, and 60-110°C for the temperature. The apparent viscosity, measured at 100 s−1, increases exponentially, with a characteristic time ranging from less than 1 h to more than 10 h, and decreasing with olivine concentration, CO2 pressure, and temperature. Moreover, a careful characterization of the slurry rheology carried out in the initial stages of slow evolution, shows that the slurry obeys a Bingham plastic law, with a yield stress ΣB, and a Bingham viscosity µB increasing from 1 to 20 Pa and from 4 to 110 mPa s, respectively, when the olivine volume fraction φ is increased from 10 to 30%. Such variations can be accounted by classical models (Wildemuth and Williams [1984]: Rheologica Acta, 23,627-635, Krieger [1972]: Advances in Colloid and Interface Science, 3, 111-136).
Environmental Progress & Sustainable Energy

hal-01054131
https://hal.archives-ouvertes.fr/hal-01054131
DOI : 10.1002/ep.11826

Éditeur(s) : HAL CCSD
Résumé : The presence of obstacles met in natural environment by the flow, influences the dispersion of air pollutants which it carries. This thesis, based on spatiotemporal micro-meteorological measurements in tropical region, aims at studying the dispersion of compounds emitted by the ecosystem mangrove according to the weather conditions. At a daily scale, the meteorological analysis reveals, besides the presence of Trade Winds, the existence of thermal flows of which nocturnal thermodynamic parameters have been defined. The field observation has shown that the weak intensity of the wind disadvantages the dispersion of compounds emitted during the night. At a finer scale, the existence of a spectral gap separating large scale phenomena of those related to turbulence has been demonstrated. These last ones were treated by spectral and statistical approaches to quantify the turbulent fluxes of momentum and sensible heat during the night, for an averaged duration of 13 minutes. The stratification of the surface layer has been considered and determined by Monin-Obukhov similarity theory. The measurements acquired at night and the application of Kolmogorov theory allowed us to deduct the dissipation rate of energy and the size of the vortices at 5.5 meters in height. This work has also led us, by gas chromatography coupled to mass spectrometry, to identify, in mangrove, sulphurated volatil organic compounds, organohalogen, BTEX, ... All these results will later serve to feed dispersion models related to the studied ecosystem.
La présence d'obstacles rencontrés en milieu naturel par l'écoulement, influence la dispersion des polluants qu'il transporte. Cette thèse, fondée sur des mesures micro-météorologiques spatio-temporelles en région tropicale, vise à étudier la dispersion de composés émis par l'écosystème mangrove en fonction des conditions météorologiques. A l'échelle journalière, l'analyse météorologique révèle, outre la présence des Alizés, l'existence d'écoulements thermiques dont des paramètres thermodynamiques nocturnes ont été définis. L'observation terrain nous a montré que la faible intensité du vent défavorise la dispersion des composés émis durant la nuit. A une échelle plus fine, l'existence d'un trou spectral séparant les phénomènes de grande échelle de ceux liés à la turbulence a été mise en évidence. Ces derniers ont été traités par des approches spectrale et statistique pour quantifier les flux turbulents de quantité de mouvement et de chaleur sensible, pendant la nuit, pour une durée de moyenne de l'ordre de 13 minutes. L'état de stratification de la couche de surface a été pris en compte et déterminé par la théorie de similitude de Monin-Obukhov. Les mesures nocturnes effectuées et l'application de la théorie de Kolmogorov ont permis de déduire les taux de dissipation de l'énergie et la taille des tourbillons à 5,5 m d'altitude. Ce travail a également conduit, par l'analyse chromatographique en phase gazeuse couplée à la spectrométrie de masse, à l'identification, en mangrove, de composés organiques volatils soufrés, des organohalogénés, des BTEX, ... L'ensemble de ces résultats servira ultérieurement à alimenter les modèles de dispersion spécifiques liés aux écosystèmes étudiés.
https://tel.archives-ouvertes.fr/tel-00665882

Droits : info:eu-repo/semantics/OpenAccess
NNT : 11AGUY0438
tel-00665882
https://tel.archives-ouvertes.fr/tel-00665882
https://tel.archives-ouvertes.fr/tel-00665882/document
https://tel.archives-ouvertes.fr/tel-00665882/file/ThA_seCdAlexis.pdf

Éditeur(s) : HAL CCSD Wiley-Blackwell
Résumé : International audience
In Alpine Corsica (France), deeply subducted metabasalts are well preserved as lawsonite-bearing eclogite (Law-Ecl), occurrence of which is restricted to similar to 10 localities worldwide. The Corsican Law-Ecl, consisting of omphacite + lawsonite + garnet + phengite + titanite, occurs as both single undeformed metabasaltic pillows surrounded by lawsonite blueschist (Law-Bs), and carbonate-bearing eclogitic veins. Law-Bs are found as variably deformed metabasaltic pillows locally cross-cut by eclogitic veins and consist of glaucophane + actinolite + lawsonite + garnet + phengite + titanite. Field evidence and microstructures reveal that both Law-Ecl and Law-Bs are stable at the metamorphic peak in the lawsonite-eclogite stability field. Isochemical phase diagrams (pseudosections) calculated for representative Law-Ecl and Law-Bs samples indicate that both lithologies equilibrated at the same conditions of similar to 520 +/- 20 degrees C and 2.3 +/- 0.1 GPa. Therefore, the coexistence at the same peak metamorphic conditions of Law-Ecl and Law-Bs implies that different portions of deeply subducted oceanic crust may store significantly different H2O contents, depending on bulk-rock chemical composition. In addition, thermodynamic modelling of phase equilibria indicates that the occurring progressive dehydration reactions, which are significantly depending on bulk-rock chemical composition, strongly influence rock densification and eclogite formation in subducting slabs.
ISSN: 0263-4929

hal-00617768
https://hal.archives-ouvertes.fr/hal-00617768
DOI : 10.1111/j.1525-1314.2011.00931.x