Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Longmen Shan range is one of the major topographic and structural features of the easternmargin of the Tibetan Plateau. With an impressive topographic gradient and low convergence rates across the range this region has raised important questions concerning the dynamics of plateaumargin settings, such as the long-term mechanisms of topographic evolution. The investigation of the distribution in space and time of denudation can provide critical insight into such dynamics and shed light on still unresolved controversies. For that purpose, we present a new dataset that documents the intensity and distribution of denudation processes across this plateaumargin through field survey of fluvial incision markers, quantitative geomorphology and cosmogenic nuclide derived basin-wide erosion rates. Erosion is < 0.5 mm/year in the frontal region of the Longmen Shan and between 0.5 and 1 mm/year further west, with a gradual decrease when reaching the northern headwaters of the Min Jiang watershed, adjacent to the beginning of the Tibetan Plateau. The spatialdistribution of denudation inferred from the various methods we use suggests that most of the differential uplift in the Central Longmen Shan is accommodated by the Beichuan Fault and frontal structures located in the foothills. The denudation pattern seems also to reflect the large-scale propagation of erosion from the Sichuan Basin toward the Plateau. This suggests that the Longmen Shan range is submitted to the combined influences of slow thrusting activity on the frontal structures and progressive westward regressiveerosion as a probable response to a pulse of uplift of the Tibetan PlateauEasternmargin, that started 10 Ma ago.
ISSN: 0040-1951

hal-01564192
https://hal.archives-ouvertes.fr/hal-01564192
DOI : 10.1016/j.tecto.2009.10.026

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
Estimating how topography is maintained provides insights into the different factors responsible for surface deformations and their relative roles. Here, we develop a new and simple approach to assess the degree of isostatic compensation of continental topography at regional scale from GOCE gravity gradients. We calculate the ratio between the radial gradient observed by GOCE and that calculated from topography only. From analytical and statistical formulations, simple relationships between this ratio and the degree of compensation are obtained under the Airy–Heiskanen isostasy hypothesis. Then, a value of degree of compensation at each point of study area can be easily deduced. We apply our method to the Alaska-Canada Cordillera and validate our results by comparison with a standard isostatic gravity anomaly model and additional geophysical information for this area. Both our GOCE-based results and the isostatic anomaly show that Airy–Heiskanen isostasy prevails for the Yukon Plateau whereas additional mechanisms are required to support topography below the Northwest Territories Craton and the Yakutat collision zone.
ISSN: 0956-540X

hal-01467540
https://hal.archives-ouvertes.fr/hal-01467540
https://hal.archives-ouvertes.fr/hal-01467540/document
https://hal.archives-ouvertes.fr/hal-01467540/file/cadioGJI2016.pdf
DOI : 10.1093/gji/ggw281

Éditeur(s) : HAL CCSD
Résumé : In Taiwan , the subduction of the Chinese continental margin under the Luzon arc results in the progressive growth of an active orogenic wedge. It is one of the best places to study the complex relationships that occurs between the tectonic processes controlling deformation (plate rheology and kinematics, metamorphism and magmatism) and surface processes (erosion and sedimentation). In order to study the kinematics of the present day convergence of Philippine Sea plate to the Asian continent around Taiwan, we perform 2D and 3D sandbox modeling and we analyzed the models with PIV (Particle Image Velocimetry) software. In 2D experiments, a model Coulomb wedge is submitted to erosion and sedimentation under topography and flux steady state conditions. The 3D experiments are mainly used to study the escape tectonics occurring in the middle west and southwest Taiwan. A wedge shaped indenter and a basement relief were used to simulate the mechanical plate boundary between Philippine Sea plate and Eurasia plate and the basement topography to the west of Taiwan respectively. We examine the exhumation patterns, the mode of fault propagation and displacement patterns by strain partitioning of vertical vs. horizontal displacement and convergent parallel vs. orogen parallel components. The preliminary conclusions are: 1. The interactions between tectonics, erosion and sedimentation control geometry and kinematics of the doubly vergent transpressional orogen. 2. Exhumation processes are controlled by the balance between erosion, frontal accretion and underplating in different structural domains of the wedge. 3. Retrowedge erosion favorites backfolding and backthrusting, induces flower structures and fan shaped cleavage distribution. 4. Sedimentation promotes underplating and out-of sequences thrusting. 5. Continental subduction or subduction of topographic highs will enhance underthrusting/underplating, thick-skin tectonics and inversion of sedimentary basin.
Bolletino di Geofisica teorica ed applicata

hal-00411133
https://hal.archives-ouvertes.fr/hal-00411133

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
Variation of dead wood decay rates among tropical trees remains one source of uncertainty in global models of the carbon cycle. Taking advantage of a broad forest plot network surveyed for tree mortality over a 23-year period, we measured the remaining fraction of boles from 367 dead trees from 26 neotropical species widely varying in wood density (0.23–1.24 g cm-3) and tree circumference at death time (31.5–272.0 cm). We modeled decay rates within a Bayesian framework assuming a first order differential equation to model the decomposition process and tested for the effects of forest management (selective logging vs. unexploited), of mode of death (standing vs. downed) and of topographical levels (bottomlands vs. hillsides vs. hilltops) on wood decay rates. The general decay model predicts the observed remaining fraction of dead wood (R2 = 60%) with only two biological predictors: tree circumference at death time and wood specific density. Neither selective logging nor local topography had a differential effect on wood decay rates. Including the mode of death into the model revealed thatstanding dead trees decomposed faster than downed dead trees, but the gain of model accuracy remains rather marginal. Overall, these results suggest that the release of carbon from tropical dead trees to the atmosphere can be simply estimated using tree circumference at death time and wood density.
ISSN: 0029-8549

hal-01094187
https://hal-agroparistech.archives-ouvertes.fr/hal-01094187
DOI : 10.1007/s00442-010-1602-8

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The growth of relief in active tectonic areas is mainly controlled by the interactions between tectonics and surface processes (erosion and sedimentation). The study of long-lived morphologic markers formed by these interactions can help in quantifying the competing effects of tectonics, erosion and sedimentation. In regions experiencing active extension, river-long profiles and faceted spurs (triangular facets) can help in un- derstanding the development of mountainous topography along normal fault scarps. In this study, we devel- oped analogue experiments that simulate the morphologic evolution of a mountain range bounded by a normal fault. This paper focuses on the effect of the fault slip rate on the morphologic evolution of the foot- wall by performing three analogue experiments with different fault slip rates under a constant rainfall rate. A morphometric analysis of the modelled catchments allows comparing with a natural case (Tunka half- graben, Siberia). After a certain amount of fault slip, the modelled footwall topographies of our models reaches a dynamic equilibrium (i.e., erosion balances tectonic uplift relative to the base level) close to the fault, whereas the topography farther from the fault is still being dissected due to regressive erosion. We show that the rates of vertical erosion in the area where dynamic equilibrium is reached and the rate of re- gressive erosion are linearly correlated with the fault throw rate. Facet morphology seems to depend on the fault slip rate except for the fastest experiment where faceted spurs are degraded due to mass wasting. A stream-power law is computed for the area wherein rivers reach a topographic equilibrium. We show that the erosional capacity of the system depends on the fault slip rate. Finally, our results demonstrate the pos- sibility of preserving convex river-long profiles on the long-term under steady external (tectonic uplift and rainfall) conditions.
ISSN: 0040-1951

hal-00646966
https://hal.archives-ouvertes.fr/hal-00646966
https://hal.archives-ouvertes.fr/hal-00646966/document
https://hal.archives-ouvertes.fr/hal-00646966/file/preprint_Strak_2011.pdf
DOI : 10.1016/j.tecto.2011.10.005

Éditeur(s) : HAL CCSD Wiley
Résumé : SUBSURF
International audience
Similarity of form between subaerial and submarine landscapes affected by erosion could suggest similarities in the process of erosion, such as by runoff and sedimentary flows, respectively. On the other hand, if aspects of form vary, its characteristics may be used to identify the environmental origin of erosion. Towards these goals, this contribution addresses the morphology of submarine volcanoes (seamounts) with widely differing histories of erosion. One set from the Pacific Ocean never exposed above sea level includes Cretaceous-age seamounts near Hawai'i (including Apu'upu'u Seamount), two seamounts of < 3 Ma in age near a mid-ocean ridge and the 11-4 Ma Jasper Seamount. These seamounts are all isolated from continents and hence from any erosion associated with mass wasting of unstable terrigenous deposits. In such isolated submarine environments, surfaces erode slowly from in situ weathering, mass wasting and scouring by sedimentary flows initiated by slope failure in pelagic or bedrock materials. The Pacific seamounts are compared with Valencia Seamount in the western Mediterranean, exposed subaerially for 100-400 k.y. during the Messinian Salinity Crisis before 5 Ma. Multibeam and deeply towed sidescan sonar data of Valencia Seamount reveal features typical of subaerial erosion of volcanic islands, such as canyons and relatively uneroded sectors (planezes) between them. Using a simple topographical reconstruction, the apparent erosion depth typically reaches 100 m within canyons and up to 180 m in places. Whereas the younger Pacific seamounts do not show these erosional features, the much older Cretaceous seamounts do have channels, which in one example suggests up to 200 m of incision. Both Valencia and Apu'upu'u seamounts have channel longitudinal profiles that are steep and typically linear to concave upwards. The erosion depth of Apu'upu'u Seamount is significant, despite the seamount's persistent submarine environment, because of its greater age, steeper flanks and greater contributing areas to channels compared with Valencia Seamount. These results illustrate that the channel morphology resulting from submarine erosion can become similar to that produced by subaerial erosion given sufficient time.
ISSN: 0950-091X

hal-00411425
https://hal.archives-ouvertes.fr/hal-00411425
DOI : 10.1111/j.1365-2117.2008.00355.x

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : In habitat mosaics, plant populations face environmental heterogeneity over short geographical distances. Such steep environmental gradients can induce ecological divergence. Lowland rainforests of the Guiana Shield are characterized by sharp, short-distance environmental variations related to topography and soil characteristics (from waterlogged bottomlands on hydromorphic soils to well-drained terra firme on ferralitic soils). Continuous plant populations distributed along such gradients are an interesting system to study intrapopulation divergence at highly local scales. This study tested (1) whether conspecific populations growing in different habitats diverge at functional traits, and (2) whether they diverge in the same way as congeneric species having different habitat preferences. Phenotypic differentiation was studied within continuous populations occupying different habitats for two congeneric, sympatric, and ecologically divergent tree species (Eperua falcata and E. grandiflora, Fabaceae). Over 3000 seeds collected from three habitats were germinated and grown in a common garden experiment, and 23 morphological, biomass, resource allocation and physiological traits were measured. In both species, seedling populations native of different habitats displayed phenotypic divergence for several traits (including seedling growth, biomass allocation, leaf chemistry, photosynthesis and carbon isotope composition). This may occur through heritable genetic variation or other maternally inherited effects. For a sub-set of traits, the intraspecific divergence associated with environmental variation coincided with interspecific divergence. The results indicate that mother trees from different habitats transmit divergent trait values to their progeny, and suggest that local environmental variation selects for different trait optima even at a very local spatial scale. Traits for which differentiation within species follows the same pattern as differentiation between species indicate that the same ecological processes underlie intra- and interspecific variation.
ISSN: 0305-7364

hal-01032430
https://hal.archives-ouvertes.fr/hal-01032430
DOI : 10.1093/aob/mct176

Éditeur(s) : Elsevier Science Bv
Résumé : We present the results from a new grid of deep penetration multichannel seismic (MCS) profiles over the 280-km-long north-central segment of the Lesser Antilles subduction zone. The 14 dip-lines and 7 strike-lines image the topographical variations of (i) the subduction interplate décollement, (ii) the top of the arcward subducting Atlantic oceanic crust (TOC) under the huge accretionary wedge up to 7 km thick, and (iii) the trenchward dipping basement of the deeply buried forearc backstop of the Caribbean upper plate. The four northernmost long dip-lines of this new MCS grid reveal several-kilometres-high topographic variations of the TOC beneath the accretionary wedge offshore Guadeloupe and Antigua islands. They are located in the prolongation of those mapped on the Atlantic seafloor entering subduction, such as the Barracuda Ridge. This MCS grid also provides unexpected evidences on huge along-strike topographical variation of the backstop basement and of the deformation style affecting the outer forearc crust and sediments. Their mapping clearly indicates two principal areas of active deformation in the prolongation of the major Barracuda and Tiburon ridges and also other forearc basement highs that correspond to the prolongation of smaller oceanic basement highs recently mapped on the Atlantic seafloor. Although different in detail, the two main deforming forearc domains share similarities in style. The imaged deformation of the sedimentary stratification reveals a time- and space-dependent faulting by successive warping and unwarping, which deformation can be readily attributed to the forearc backstop sweeping over the two obliquely-oriented elongated and localized topographical ridges. The induced faulting producing vertical scarps in this transport does not require a regional arc-parallel extensional regime as proposed for the inner forearc domain, and may support a partitioned tectonic deformation such as in the case of an outer forearc sliver. A contrasted reflectivity of the sedimentary layering at the transition between the outer forearc and accretionary domains was resolved and used to define the seaward edge of the outer forearc basement interpreted as being possibly a proxy to the updip limit of the interplate seismogenic zone. Its mapping documents along-arc variations of some tens of kilometres the subduction backstop with respect to the negative gravity anomaly commonly taken as marking the subduction trench. With the exception of the southernmost part, the newly mapped updip limit reaches 25 km closer to the trench, thus indicating a possible wider seismogenic zone over almost the whole length of the study area.
Tectonophysics (0040-1951) (Elsevier Science Bv), 2013-09 , Vol. 603 , P. 32-54

Droits : 2013 Elsevier B.V. All rights reserved
http://archimer.ifremer.fr/doc/00139/25003/23109.pdf
DOI:10.1016/j.tecto.2013.05.028
http://archimer.ifremer.fr/doc/00139/25003/

Éditeur(s) : HAL CCSD Springer Verlag (Germany)
Résumé : International audience
Surface displacements due to temporal changes in environmental mass redistributions are observable in the coordinate time series of many Global Navigation Satellite System (GNSS) sites. In this study, we investigated the effect of loading on estimates of tectonic velocity computed from campaign-style GNSS observations. The study region is in the Pyrenees mountain range between France and Spain (ResPyr campaigns). In this area, seismic activity is continuous and moderate and the expected amplitude of the horizontal tectonic velocity is less than 0.5 mm/yr. In order to determine the velocity, 4 sparse GNSS campaigns were carried out from 1995 to 2010. Considering this small rate of deformation, loading phenomena can contribute a non-negligible artifact to the velocity computation that could affect our geodynamical interpretation. In this investigation, we specifically considered the atmospheric, hydrological, and non-tidal ocean loading phenomena. The computed loading deformations for this region show the horizontal displacements are dominated by the non-tidal ocean loading (maximum 4 mm for the North and 3.1 mm for the East components); the main vertical contributions are due to the atmospheric and continental water storage loading (maximum 14.3 for the atmosphere and 8.1 mm for the hydrology, respectively). We have found that the dominant loading effect on the horizontal velocity is the non-tidal ocean loading (mean of 0.11 mm/yr), whereas the vertical component is dominated by the hydrological loading (mean of 0.21 mm/yr). Since the study area is in a mountainous region, we also analyzed the difference between the atmospheric and the topography dependent atmospheric loading models at our GNSS campaign sites. We did not find any significant difference between the two atmospheric loading models in terms of horizontal velocity. Finally, we performed simulations to identify the optimum timing and frequency of future GNSS campaigns in this area that would minimize the loading effects on tectonic velocity estimates.
ISSN: 0039-3169

hal-00963629
https://hal.archives-ouvertes.fr/hal-00963629
DOI : 10.1007/s11200-012-0458-2

Éditeur(s) : HAL CCSD Blackwell Publishing
Résumé : International audience
In the Causses platform (south-east France), Late Hettangian to Sinemurian deposits were interpreted previously as shallow-water carbonate ramp deposits. A new look at these deposits has shown a fault-controlled mosaic carbonate platform that is different from the carbonate ramp models. Within the platform mosaic, 15 lithofacies have been recognized, which are organized in four facies associations, including peritidal, restricted shallow sub-tidal, sand dunes and sub-tidal shelf facies associations. The rapid lateral and vertical facies changes, and the lack of consistent landward or seaward direction indicated by the pattern of facies changes, question the existence of a shoreline suggested by the traditional models for this region. Instead, the facies organization and cycle stacking pattern suggest deposition in a mosaic of intertidal islands between which sub-tidal restricted or open conditions could coexist in very close proximity. Such a platform mosaic would have been defined by tectonic activities along normal faults which segmented the shallow-water Causses platform. The facies and facies associations are arranged into metre-scale, peritidal and sub-tidal cycles that are also variable. Certain cycles show the same stacking pattern in all the sections and seem to be traceable over tens of kilometres. On the contrary, other cycles cannot be correlated; they are present only in specific sections and have a maximum lateral extension of 1 or 2 km. These metre-scale cycles stack to form four medium-scale cycles bounded by surfaces that display sub-aerial exposure features. Medium-scale cycles stack into two larger-scale cycles (tens of metres thick) and are bounded by well-defined karstic surfaces. Based on their lateral continuity and their stacking pattern, the metre-scale cycles are controlled probably by high frequency eustatic variations overprinting the topographic irregularities formed by differential subsidence of fault-bounded blocks. Episodic fault activities may reorganize the topography so that, even if eustatic changes may still be the major control of cycles, the expression and number of cycles could be different. Cycles of medium and large-scale are interpreted as being allogenic, controlled by changes in eustasy and/or subsidence rates as evidenced by their lateral continuity and the correlations of the large-scale cycles with third-order depositional sequences.
ISSN: 1469-3496

hal-00411940
https://hal.archives-ouvertes.fr/hal-00411940
DOI : 10.1111/j.1365-3091.2007.00896.x

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Middle Atlas is a region where xenolith-bearing volcanism roughly coincides with the maximum of lithospheric thinning beneath continental Morocco. It is therefore a key area to study the mechanisms of lithospheric thinning and constrain the component of mantle buoyancy that is required to explain the Moroccan topography. Samples from the two main xenolith localities, the Bou Ibalghatene and Tafraoute maars, have been investigated for their mineralogy, microstructures, crystallographic preferred orientation, and whole-rock and mineral compositions. While Bou Ibalghatene belongs to the main Middle Atlas volcanic field, in the ‘tabular’ Middle Atlas, Tafraoute is situated about 45 km away, on the North Middle Atlas Fault that separates the ‘folded’ Middle Atlas, to the South-East, from the ‘tabular’ Middle Atlas, to the North-West. Both xenolith suites record infiltration of sub-lithospheric melts that are akin to the Middle Atlas volcanism but were differentiated to variable degrees as a result of interactions with lithospheric mantle. However, while the Bou Ibalghatene mantle was densely traversed by high melt fractions, mostly focused in melt conduits, the Tafraoute suite records heterogeneous infiltration of smaller melt fractions that migrated diffusively, by intergranular porous flow. As a consequence the lithospheric mantle beneath Bou Ibalghaten was strongly modified by melt–rock interactions in the Cenozoic whereas the Tafraoute mantle preserves the record of extensional lithospheric thinning, most likely related to Mesozoic rifting. The two xenolith suites illustrate distinct mechanisms of lithospheric thinning: extensional thinning in Tafraoute, where hydrous incongruent melting triggered by decompression probably played a key role in favouring strain localisation, vs. thermal erosion in Bou Ibalghatene, favoured and guided by a dense network of melt conduits. Our results lend support to the suggestion that lithospheric thinning beneath the Atlas mountains results from the combination of different mechanisms and occurred in a piecewise fashion at a short wavelength scale.
ISSN: 0040-1951

hal-01171756
https://hal.archives-ouvertes.fr/hal-01171756
DOI : 10.1016/j.tecto.2014.11.020

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : Approximately 4 yr of campaign and continuous Global Positioning System (GPS) measurements across the Dead Sea fault system (DSFS) in Lebanon provide direct measurements of interseismic strain accumulation along a 200-km-long restraining bend in this continental transform fault. Late Cenozoic transpression within this restraining bend has maintained more than 3000 m of topography in the Mount Lebanon and Anti-Lebanon ranges. The GPS velocity field indicates 4-5 mm yr(-1) of relative plate motion is transferred through the restraining bend to the northern continuation of the DSFS in northwestern Syria. Near-field GPS velocities are generally parallel to the major, left-lateral strike-slip faults, suggesting that much of the expected convergence across the restraining bend is likely accommodated by different structures beyond the aperture of the GPS network (e.g. offshore Lebanon and, possibly, the Palmyride fold belt in SW Syria). Hence, these geodetic results suggest a partitioning of crustal deformation involving strike-slip displacements in the interior of the restraining bend, and crustal shortening in the outer part of the restraining bend. Within the uncertainties, the GPS-based rates of fault slip compare well with Holocene-averaged estimates of slip along the two principal strike-slip faults: the Yammouneh and Serghaya faults. Of these two faults, more slip occurs on the Yammouneh fault, which constitutes the primary plate boundary structure between the Arabia and Sinai plates. Hence, the Yammouneh fault is the structural linkage that transfers slip to the northern part of the transform in northwestern Syria. From the perspective of the regional earthquake hazard, the Yammouneh fault is presently locked and accumulating interseismic strain.
ISSN: 0956-540X

hal-00406620
https://hal.archives-ouvertes.fr/hal-00406620
DOI : 10.1111/j.1365-246X.2006.03328.x

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Lithospheric-scale faults related to oblique subduction are responsible for some of the most hazardous earthquakes reported worldwide. The mega-thrust in the Sunda sector of the Sumatran oblique subduction has been intensively studied, especially after the infamous 2004 Mw 9.1 earthquake, but its onshore kinematic complement within the Sumatran subduction, the transform Sumatran Fault System, has received considerably less attention. In this paper, we apply a combination of analysis of Digital Elevation Models (ASTER GDEM) and field evidence to resolve the kinematics of the leading edge of deformation of the northern sector of the Sumatran Fault System. To this end, we mapped the northernmost tip of Sumatra, including the islands to the northwest, between 4.5°N and 6°N. Here, major topographic highs are related to different faults. Using field evidence and our GDEM structural mapping, we can show that in the area where the fault bifurcates into two fault strands, two independent kinematic regimes evolve, both consistent with the large-scale framework of the Sumatran Fault System. Whereas the eastern branch is a classic Riedel system, the western branch features a fold-and-thrust belt. The latter contractional feature accommodated significant amounts (c. 20%) of shortening of the system in the study area. Our field observations of the tip of the NSFS match a strain pattern with a western contractional domain (Pulau Weh thrust splay) and an eastern extensional domain (Pulau Aceh Riedel system), which are together characteristic of the tip of a propagating strike-slip fault, from a mechanical viewpoint. For the first time, we describe the strain partitioning resulting from the propagation of the NSFS in Sumatra mainland. Our study helps understanding complex kinematics of an evolving strike-slip system, and stresses the importance of field studies in addition to remote sensing and geophysical studies.
ISSN: 0040-1951

hal-01467196
https://hal.archives-ouvertes.fr/hal-01467196
DOI : 10.1016/j.tecto.2016.04.050

Éditeur(s) : Elsevier Science Bv
Résumé : Recent oceanographic surveys revealed the existence of five volcaniclastic deep-sea fans off La Reunion Island. The Cilaos fan is a large volcaniclastic submarine fan, connected to rivers that episodically experience torrential floods through a narrow and steep shelf-slope system. New piston cores presented in this study together with echosounder profiles give new insight into the evolution, of this extensive and sand-rich turbidite system. The Cilaos fan extends over 15,000 km(2) on an abyssal plain and is compartmentalized by topographic highs. Located southwest of the island, the sedimentary system consists of a canyon area and a deep sea fan divided into a proximal and a distal fan. The proximal fan is characterized by its wide extent and coarse-grained turbidites. The distal fan is characterized by elongated structures and fine-grained turbidites. A detailed morphological study of the fan which includes the analysis of swath bathymetry, backscatter, echosounder, and piston core data shows that the Cilaos fan is a complex volcaniclastic deep-sea fan, highly influenced by preexisting seafloor irregularities. The canyons and the slope area show a complex and evolving sediment feeding system with a direct sediment input by the river and irregular sediment supply by submarine landslide. Three main construction stages are identified for this system: (1) an old incision phase of the channels forming wide turbidites extending over the entire distal fan; (2) a period of no or low activity characterized by a thick layer of hemipelagic mud; and (3) a local reactivation of the channel in the proximal fan. Each stage seems to be linked to a different sediment source with a progressively increasing contribution of hemipelagic sediment and mud in younger stages. (C) 2011 Elsevier B.V. All rights reserved.
Marine Geology (0025-3227) (Elsevier Science Bv), 2011-10 , Vol. 288 , N. 1-4 , P. 1-17

Droits : 2011 Elsevier B.V. All rights reserved.
http://archimer.ifremer.fr/doc/00056/16704/14203.pdf
DOI:10.1016/j.margeo.2011.06.011
http://archimer.ifremer.fr/doc/00056/16704/

Éditeur(s) : HAL CCSD
Résumé : In the tropical rainforest of Amazonia, the factors driving the evolution of tree species remain poorly understood, and the relative influence of neutral and adaptive processes is continuously debated. In particular, local habitat patchiness draws much attention, as profound changes in the structure and composition of forest communities occur among micro-habitats. Thus, micro-environmental variations related to topography have frequently been invoked as drivers of adaptive radiation leading to sympatric speciation in Neotropical trees. On one hand, the hypothesis of local adaptation has never been investigated at the intra-specific level, i.e. within species currently undergoing population differentiation; on the other hand, many tree species are genetically structured over local scales due to neutral processes, mainly limited gene flow (caused by restricted pollen and seed dispersal). In this study, I used populations of a common tree species of the Guiana Shield - Eperua falcata (Fabaceae) - to study how neutral and adaptive processes shape the distribution of genetic diversity across forest landscapes characterized by local micro-habitat patchiness. I asked three main questions by combining both phenotypic (quantitative genetics) and molecular (population genetics) approaches: 1) How is the genetic diversity structured in forest landscapes of French Guiana? 2) Which evolutionary drivers are relevant to explain the structure of genetic diversity at local scale? 3) Does local adaptation contribute to structure genetic diversity within continuous populations?
En forêt tropicale humide Amazonienne, les facteurs gouvernant l'évolution des espèces d'arbres restent peu connus et continuellement débattus. En particulier, les micro-variations environnementales attirent beaucoup d'attention car elles induisent de profondes modifications de structure et composition des communautés. Les variations micro-environnementales associées à la topographie ont couramment été évoquées comme facteur de radiations adaptatives chez les espèces d'arbres. Cependant, l'hypothèse de l'adaptation locale n'a jamais été testée au niveau intra-spécifique chez les arbres de forêt amazonienne alors que l'on sait que la diversité génétique des arbres tropicaux est couramment structurée à faibles échelles spatiales par des processus neutres (en particulier du fait de restrictions de flux de gènes). Dans cette étude, j'ai étudié le processus de différentiation génétique d'une espèce d'arbre (Eperua falcata, Fabaceae) dans les paysages forestiers de Guyane française grâce à la combinaison d'une approche phénotypique (génétique quantitative) et d'une approche moléculaire (génétique des populations). Je me suis attachée à répondre à trois questions principales : 1) Comment se distribue la diversité génétique dans les paysages forestiers de Guyane française ? 2) Quelles forces évolutives sont impliquées dans le processus de différentiation génétique à faible échelle spatiale ? 3) Est-ce que le processus d'adaptation locale contribue à structurer la diversité génétique à faible échelle spatiale ?
https://tel.archives-ouvertes.fr/tel-00967318

NNT : 2013LORR0188
tel-00967318
https://tel.archives-ouvertes.fr/tel-00967318
https://tel.archives-ouvertes.fr/tel-00967318/document
https://tel.archives-ouvertes.fr/tel-00967318/file/THESE_Louise_Brousseau.pdf

Éditeur(s) : HAL CCSD
Résumé : The presence of biological matter (biofilms) in deep geological sites for storage of, for instance, toxic elements or groundwater in aquifers was clearly proved. That biomass triggers physical and chemical processes which greatly modify the durability and the sustainability of the sites. These processes, mainly from oxidative/reductive reactions, are poorly understood. This is mainly due to the fact that former studies were done at the macroscopic level far away from the micrometric scale where relevant processes induced by bacteria take place. Investigations at microscopic level are needed. Thus, we developed an experimental set-up based on the combined use of optical microscopy (transmission), atomic force microscopy (AFM) and electrical and electro-chemical AFM microscopy (EC_AFM) in order to get simultaneous information on topographic and electro-chemical processes. The first highly sensitive step was to use AFM with biological samples in liquid environment: wepresent here a study about AFM imaging of living, moving or self-immobilized bacteria, in their genuine physiological liquid medium and in true in vivo conditions. No external immobilization protocol, neither chemical nor mechanical was needed. For the first time, the native gliding movements of Gram negative Nostoc cyanobacteria upon the surface were studied by AFM. AFM height and mechanical stiffness data were simultaneously acquired. From these, mechanical parameters, inner turgor pressure and Young modulus, were derived for different bacterial species (Anabaenopsis circularis, Rhodococcus wratislaviensis). Our study revealed that AFM imaging is thus possible on moving living species. These results open a large window on new studies of both dynamical phenomena of practical and fundamental interests such as the formation of biofilms and dynamic properties of bacteria in real physiological conditions. The second delicate step was to combine AFM and optical measurements with electrical ones. We mounted a new experimental set-up coupling real-time (i) monitoring of optical properties as the optical density (OD) evolution related to bulk bacterial growth in liquid or as the counting of number of bacteria adhering on the surface of the sample as well and (ii) electrical and electrochemical measurements. Furthermore, these results will shortly be applied to the optimized monitoring of the in-situ activity of bacteria consuming oil pollutants, following this way, in real-time, the bioremediation of an oilcontaminated soil (ANR ECOTECH_BIOPHY program).
La présence de matière biologique (biofilms) dans les sites de stockage géologique profond, d'éléments toxiques ou encore de l'eau potable des aquifères est maintenant clairement démontrée. Cette biomasse est à l'origine de processus physiques et chimiques qui modifient considérablement la durabilité et la pérennité des sites concernés. Ces processus, principalement de type oxydo-réductif, sont encore mal compris. Ceci est principalement dû aux méthodes d'investigation, principalement macroscopiques, loin de l'échelle micrométrique caractéristique des bactéries. Seules des études, basées sur des méthodes d'investigation locale, peuvent apporter les informations requises. Ainsi, nous avons développé un dispositif expérimental basé sur l'utilisation combinée de la microscopie optique (en transmission), la microscopie à force atomique (AFM) et la microscopie AFM en mode électrique et électrochimique (EC_AFM) afin d'obtenir des informations simultanées sur la topographie de l'échantillon et sur les processus électrochimiques à l'échelle des bactéries. La première étape sensible consistait à utiliser l'AFM sur des échantillons biologiques en milieu liquide: nous présentons ici les résultats de l'imagerie AFM en milieu liquide de plusieurs types de bactéries dans leurs conditions physiologiques naturelles (conditions in vivo). Aucun protocole d'immobilisation, ni chimique ni mécanique, n'a été nécessaire; et pour la première fois, les mouvements de reptation de cyanobactéries Nostoc ont été étudiés par l'AFM. Les études AFM ont permis d'acquérir des données topographiques mais aussi mécaniques : nous avons pu ainsi mesurer le module d'Young, la pression de turgescence de différentes souches bactériennes (Anabaenopsis circularis, Rhodococcus wratislaviensis). Cette étude complète, a révélé que l'imagerie AFM est donc possible sur des espèces vivantes en mouvement. Ces résultats ouvrent une grande fenêtre sur de nouvelles études d'intérêts tels que la formation de biofilms et les propriétés dynamiques de bactéries dans des conditions physiologiques réelles. La deuxième étape délicate était de combiner l'AFM aux mesures optiques et électriques. Nous avons développé un nouveau dispositif expérimental permettant (i) le suivi de l'évolution de la croissance bactérienne par la mesure des propriétés optiques comme la densité optique DO (pour le développement bactérien en volume - milieu planctonique) , ou l'analyse de l'image du substrat par comptage du nombre de bactéries sur la surface de l'échantillon (biofilm), et (ii) les mesures électriques et électrochimiques. L'ensemble de ces résultats sera prochainement appliqué au développement de nouveaux outils de surveillance d'une biodépollution de terrain contaminé par les hydrocarbures, par le suivi in situ et en temps réel de l'activité de bactéries dépolluantes (ECOTECH_BIOPHY ANR).
https://tel.archives-ouvertes.fr/tel-01044714

tel-01044714
https://tel.archives-ouvertes.fr/tel-01044714
https://tel.archives-ouvertes.fr/tel-01044714/document
https://tel.archives-ouvertes.fr/tel-01044714/file/theseDhahri2013.pdf

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
[1] This article presents (U-Th)/He thermochronological data from the Longmen Shan belt, eastern Tibet. Located between the Songpan-Garze terrane and the Yangtze craton, this mountain range is one of the steepest margins of the Tibetan Plateau and an important area for the comprehension of the mechanisms that control the dynamics of such plateau borders in terms of spatial distribution of deformation or timing of topographic building. We describe several age-elevation transects and perform forward modeling of our data to derive quantitative information on the exhumation of the range. A major phase of exhumation started at 8–11 Ma, with an average rate of $0.65 mm a À1. Comparison of zircon and apatite ages indicates that the eastern part of the range may have experienced a significant decrease in exhumation since 2–3 Ma. We use the distribution of finite exhumation across the major faults of the area to quantify their dip-slip throw rate over the last 10 Ma. The Beichuan Fault, which was activated during the 2008 Sichuan earthquake, is the major active structure of the Longmen Shan since the late Miocene, with an average thrusting slip rate between 0.4 and 1 mm a À1. Conversely, over the same time period, only minor dip-slip activity occurred on the Wenchuan Fault Zone. This distribution in space and time of exhumation and deformation is discussed and compared to the different proposed models for the geodynamical evolution of the eastern Tibetan margin. It also provides an important long-term perspective to put in context the destructive 2008 Sichuan earthquake that struck the central Longmen Shan.
ISSN: 0278-7407

hal-01577059
https://hal-amu.archives-ouvertes.fr/hal-01577059
https://hal-amu.archives-ouvertes.fr/hal-01577059/document
https://hal-amu.archives-ouvertes.fr/hal-01577059/file/godard2009late.pdf
DOI : 10.1029/2008TC002407

Éditeur(s) : HAL CCSD
Résumé : 38 pages
Rapport
The Chicxulub impact crater, México, is unique. It is the only known terrestrial impact structure that has been directly linked to a mass extinction event and the only terrestrial impact with a global ejecta layer. Of the three largest impact structures on Earth, Chicxulub is the best preserved. Chicxulub is also the only known terrestrial impact structure with an intact, unequivocal topographic peak ring. Chicxulub’s role in the Cretaceous/Paleogene (K-Pg) mass extinction and its exceptional state of preservation make it an important natural laboratory for the study of both large impact crater formation on Earth and other planets and the effects of large impacts on the Earth’s environment and ecology. Our understanding of the impact process is far from complete, and despite more than 30 years of intense debate, we are still striving to answer the question as to why this impact was so catastrophic.During International Ocean Discovery Program (IODP) Expedition 364, Paleogene sediments and lithologies that make up the Chicxulub peak ring were cored to investigate (1) the nature and formational mechanism of peak rings, (2) how rocks are weakened during large impacts, (3) the nature and extent of post-impact hydrothermal circulation, (4) the deep biosphere and habitability of the peak ring, and (5) the recovery of life in a sterile zone. Other key targets included sampling the transition through a rare midlatitude section that might include Eocene and Paleocene hyperthermals and/or the Paleocene/Eocene Thermal Maximum (PETM); the composition and character of the impact breccias, melt rocks, and peak-ring rocks; the sedimentology and stratigraphy of the Paleocene–Eocene Chicxulub impact basin infill; the chronology of the peak-ring rocks; and any observations from the core that may help us constrain the volume of dust and climatically active gases released into the stratosphere by this impact. Petrophysical property measurements on the core and wireline logs acquired during Expedition 364 will be used to calibrate geophysical models, including seismic reflection and potential field data, and the integration of all the data will calibrate impact crater models for crater formation and environmental effects. The proposed drilling directly contributes to IODP Science Plan goals:Climate and Ocean Change: How resilient is the ocean to chemical perturbations? The Chicxulub impact represents an external forcing event that caused a 75% level mass extinction. The impact basin may also record key hyperthermals within the Paleogene.Biosphere Frontiers: What are the origin, composition, and global significance of subseafloor communities? What are the limits of life in the subseafloor? How sensitive are ecosystems and biodiversity to environmental change? Impact craters can create habitats for subsurface life, and Chicxulub may provide information on potential habitats for life, including extremophiles, on the early Earth and other planetary bodies. Paleontological and geochemical studies at ground zero will document how large impacts affect ecosystems and effects on biodiversity.Earth Connections/Earth in Motion: What are the composition, structure and dynamics of Earth’s upper mantle? What mechanisms control the occurrence of destructive earthquakes, landslides, and tsunami? Mantle uplift in response to impacts provides insight into dynamics that differ between Earth and other rocky planets. Impacts generate earthquakes, landslides, and tsunami, and scales that generally exceed plate tectonic processes yield insight into effects, the geologic record, and potential hazards.IODP Expedition 364 was a Mission Specific Platform expedition to obtain subseabed samples and downhole logging measurements from the sedimentary cover sequence and peak ring of the Chicxulub impact crater. A single borehole was drilled into the Chicxulub impact crater on the Yucatán continental shelf, recovering core from 505.7 to 1334.73 m below seafloor with ~99% core recovery and acquiring downhole logs for the entire depth.
International Ocean Discovery Program

hal-01639520
https://hal.archives-ouvertes.fr/hal-01639520
DOI : 10.14379/iodp.pr.364.2017

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Tectonically controlled landforms develop morphologic features that provide useful markers to investigate crustal deformation and relief growth dynamics. In this paper, we present results of morphotectonic experiments obtained with an innovative approach combining tectonic and surface processes (erosion, transport, and sedimentation), coupled with accurate model monitoring techniques. This approach allows for a qualitative and quantitative analysis of landscape evolution in response to active deformation in the three end-member geological settings: compression, extension, and strike–slip.Experimental results outline first that experimental morphologies evolve significantly at a short time scale. Numerous morphologic markers form continuously, but their lifetime is generally short because erosion and sedimentation processes tend to destroy or bury them. For the compressional setting, the formation of terraces above an active thrust appears mainly controlled by narrowing and incision of the main channel through the uplifting hanging-wall and by avulsion of deposits on fan-like bodies. Terrace formation is irregular even under steady tectonic rates and erosional conditions. Terrace deformation analysis allows retrieving the growth history of the structure and the fault slip rate evolution. For the extensional setting, the dynamics of hanging-wall sedimentary filling appears to control the position of the base level, which in turn controls footwall erosion. Two phases of relief evolution can be evidenced: the first is a phase of relief growth, and the second is a phase of upstream propagation of topographic equilibrium that is reached first in the sedimentary basin. During the phase of relief growth, the formation of triangular facets occurs by degradation of the fault scarp, and their geometry (height) becomes stationary during the phase of upstream propagation of the topographic equilibrium. For the strike–slip setting, the complex morphology of the wrench zone, composed of several interacting fault segments, enhances the interactions with the drainage network. Because of the widening of the main fault zone toward the surface, a significant amount of distributed deformation is observed along the wrench zone. Locally, where two terminations of fault segments interact, less than a quarter of the far field displacement can remain measurable using fault offsets, leading to a systematic underestimation of the real fault slip rate.These different experimental examples illustrate the great potential of the approach coupling deformation mechanisms and erosion–transport–sedimentation processes to investigate qualitatively and quantitatively the morphotectonic evolution of tectonically controlled landscapes.
ISSN: 0169-555X

hal-01243587
https://hal.archives-ouvertes.fr/hal-01243587
DOI : 10.1016/j.geomorph.2015.02.011

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
We use digital elevation models and satellite imagery data completed with field observations to develop an integrated morphotectonic analysis of the anomalous topography of the Central Cordillera of Patagonia between 46 degrees S and 48 degrees S, in a region overlying subducted segments of the Chile Spreading Ridge. This region shows a number of peculiar features, not expected in a normal subduction-related belt located away from a buried spreading center. First, it is characterized by overall short-wavelength topography and highly contrasted reliefs, typical of deeply incised young mountain belts, but surprisingly, also by an average very low elevation of similar to 900 m. Second, the Cordillera lacks central high reliefs; instead, there is a central, depressed domain with average low slope gradients including the deepest point of the study area (300 m below sea level in the bottom of Lake General Carrera/Buenos Aires). This depressed area is flanked by western and eastern regions of higher elevation having opposite general slope dips. To the east, the central Patagonian Cordillera is now separated from the flat plains of the Pampean domain (representing its former piedmont) and several elevated basaltic plateaus (mesetas) by 160 degrees N-180 degrees N trending morphotectonic corridors and the western border scarps of the mesetas. These scarps correspond to neotectonic features controlled by recent vertical faults, mostly active after 3 Ma. Remnants of a former peneplain, the Avellanos surface, are widespread within the entire Cordilleran region. From geological evidence, this peneplain formed between 15 and 4 Ma and was connected originally with the mesetas domain and now is dissected by these corridors. It is shown that a negative inversion related to extensional and strike-slip faulting occurred in the frontal region of the Cordillera at 3 Ma synchronously with the emplacement of magmatic products. Timing of the extensional deformation in central Patagonia is concomitant with the migration at depth of different segments of the South Chile Ridge, which entered the trench at 6 and 3 Ma, respectively, and the consequent opening of a slab window allows asthenospheric hot mantle to reach lithospheric regions. Finally, migration of segments of the Chile Spreading Ridge since 6 Ma triggered regional uplift of the Cordillera followed by limited extension in relation with increased thermal weakening of the crust.
ISSN: 0278-7407

hal-00486334
https://hal.archives-ouvertes.fr/hal-00486334
DOI : 10.1029/2009TC002453