Éditeur(s) : HAL CCSD Wiley
Résumé : SUBSURF
International audience
Similarity of form between subaerial and submarine landscapes affected by erosion could suggest similarities in the process of erosion, such as by runoff and sedimentary flows, respectively. On the other hand, if aspects of form vary, its characteristics may be used to identify the environmental origin of erosion. Towards these goals, this contribution addresses the morphology of submarine volcanoes (seamounts) with widely differing histories of erosion. One set from the Pacific Ocean never exposed above sea level includes Cretaceous-age seamounts near Hawai'i (including Apu'upu'u Seamount), two seamounts of < 3 Ma in age near a mid-ocean ridge and the 11-4 Ma Jasper Seamount. These seamounts are all isolated from continents and hence from any erosion associated with mass wasting of unstable terrigenous deposits. In such isolated submarine environments, surfaces erode slowly from in situ weathering, mass wasting and scouring by sedimentary flows initiated by slope failure in pelagic or bedrock materials. The Pacific seamounts are compared with Valencia Seamount in the western Mediterranean, exposed subaerially for 100-400 k.y. during the Messinian Salinity Crisis before 5 Ma. Multibeam and deeply towed sidescan sonar data of Valencia Seamount reveal features typical of subaerial erosion of volcanic islands, such as canyons and relatively uneroded sectors (planezes) between them. Using a simple topographical reconstruction, the apparent erosion depth typically reaches 100 m within canyons and up to 180 m in places. Whereas the younger Pacific seamounts do not show these erosional features, the much older Cretaceous seamounts do have channels, which in one example suggests up to 200 m of incision. Both Valencia and Apu'upu'u seamounts have channel longitudinal profiles that are steep and typically linear to concave upwards. The erosion depth of Apu'upu'u Seamount is significant, despite the seamount's persistent submarine environment, because of its greater age, steeper flanks and greater contributing areas to channels compared with Valencia Seamount. These results illustrate that the channel morphology resulting from submarine erosion can become similar to that produced by subaerial erosion given sufficient time.
ISSN: 0950-091X

hal-00411425
https://hal.archives-ouvertes.fr/hal-00411425
DOI : 10.1111/j.1365-2117.2008.00355.x

Éditeur(s) : Elsevier Science Bv
Résumé : Although Ni isotopes have been shown to be significantly fractionated in terrestrial samples, their use in continental environmental studies has not yet been evaluated. The present study focuses on an ultramafic (UM) massif (Barro Alto, Goias, Brazil) because such areas are naturally rich in Ni. We present developed lateritic weathering profiles. The goal of the study is to evaluate the potential of using Ni isotopes in environmental continental studies by combining its isotopic signature with mineralogy, in order to better understand the geochemical cycling of Ni in UM settings during weathering. As such, Ni isotope values were measured in samples from the Barro Alto UM complex in the main stages of the lateritic weathering profile of UM rocks, including bedrock, ores (saprolitic and lateritic samples) and soil. The mineralogical composition of the samples, with a focus on the different Ni-bearing minerals, was also determined to decipher the potential links between isotopic fractionation and weathering dynamics. Isotopic signatures (δ60Ni) from the natural Ni geochemical cycle include: bedrock samples (δ60Ni = 0.28 ± 0.08‰), ore samples (saprolitic and lateritic, δ60Ni from -0.60 to 0.30‰) and soil samples (δ60Ni from -0.19 to -0.02‰). An overall trend of heavier isotope depletion was observed in the solid phase during weathering (Δ60NiSoil-Bedrock = -0.47‰). The mineralogical results were consistent with the literature and showed that the mineralogy of the lateritic part and soil was dominated by Fe-oxides, whereas clay minerals were the primary Ni phase scavengers in the saprolitic part of the profile. Thus, the formation of Ni-bearing clay minerals and Fe-oxides appeared to lead to depletion in heavier isotopes, which indicates preferential export of heavy isotopes in the dissolved phase. This result is consistent with isotopic signatures measured in the exchangeable pool of the solid phase (Δ60Niexch-total up to 0.47‰), and Ni isotopes appear to be a promising tracer to better understand the biogeochemical Ni cycling on the Earth’s surface.
Chemical Geology (0009-2541) (Elsevier Science Bv), 2015-05 , Vol. 402 , P. 68-76

Droits : 2015 Elsevier B.V. All rights reserved.
http://archimer.ifremer.fr/doc/00254/36553/35098.pdf
DOI:10.1016/j.chemgeo.2015.02.039
http://archimer.ifremer.fr/doc/00254/36553/

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
In this study, we quantify and analyze the spatial and temporal evolution of the surface displacement of Kahrod landslide located in the center of Alborz range (Iran) within the Haraz valley. This landslide represents a threat for this main drainage axis and its numerous infrastructures. We present three sets of displacement vectors based on GPS technique. An 8-benchmark network has been surveyed four times on a 1-year period basis. It provides accurate information on the rate of displacement within the landslide, and addresses the problem of the mechanical resistance of a small hillock, down slope, under the stress imposed by the landslide. Then. this network is densified (57 marks) and measured twice in 6 months using a rapidstatic approach. This yields to a dense description of surface deformation over the whole landslide. Finally, a 1-year time series of permanent GPS recordings is presented and compared to rainfall. Furthermore, we analyze Envisat radar differential interferograms (DInSAR) spanning the same period as permanent GPS. These geodetic data allow to precisely determine the limits of the current sliding zone and to describe the spatial and temporal evolution of surface displacement. The combination of geodesy and field observations leads to a precise description of the past and present kinematics behavior of Kahrod landslide. The chaotic nature of the sliding mass suggests a first catastrophic landslide in a first episode. During the period of observation, the landslide appears to deform quite steadily, and the evidence of short-term correlation between rainfall and deformation amplitude needs to be confirmed by future measurements. Carrying on the acquisition of GPS and InSAR data within the sliding mass but also within adjacent bedrock should give fundamental information with regards to major activation processes (river sapping, water seeping, earthquakes, or failure within the frontal hill of bedrock) and their potential consequences.
ISSN: 1435-9529

hal-00411318
https://hal.archives-ouvertes.fr/hal-00411318
DOI : 10.1016/j.enggeo.2008.02.013

Éditeur(s) : HAL CCSD Elsevier Masson
Résumé : International audience
The Chaînons Béarnais ranges (North-Pyrenean Zone, west-central Pyrenees) display a fold-and-thrust structure involving the Mesozoic sedimentary cover, decoupled from its substratum at the Keuper evaporites level and associated with a few peridotite bodies and scarce Palaeozoic basement lenses. In the western part of the Chaînons Béarnais, the newly described recumbent fold of the Saraillé massif comprises a peridotite body and several lenses of Palaeozoic basement wrapped by the Triassic to Aptian sedimentary cover. This structure represents a remnant of the distal portion of the Pyrenean paleo-rifted margin where mantle rocks have been exhumed during Albian–Cenomanian times. In this paper, we present the first detailed mapping and microstructural analysis of the Saraillé massif, providing new geological basis for reconstructing the evolution of this part of the paleo-margin. Our mapping (i) shows that the pre-rift Mesozoic cover forms a recumbent fold cored by mantle and crustal rocks and (ii) confirms that the prerift cover was detached from its bedrock along a layer of Triassic evaporites and slid onto the exhumed mantle rocks. Sliding of the prerift cover was associated with extreme crustal thinning and mantle exhumation along a major detachment fault, together with intense metasomatism affecting both the continental basement and the sedimentary cover. We show for the first time (1) that the Mesozoic pre-rift sediments experienced syn-metamorphic ductile thinning during mantle exhumation, and (2) that during its extreme attenuation, the continental basement was reduced to tectonic lenses some ten meters thick by ductile shearing.
ISSN: 1631-0713

insu-01265777
https://hal-insu.archives-ouvertes.fr/insu-01265777
https://hal-insu.archives-ouvertes.fr/insu-01265777/document
https://hal-insu.archives-ouvertes.fr/insu-01265777/file/corre-CRGeosc-2016.pdf
DOI : 10.1016/j.crte.2015.11.007

Éditeur(s) : HAL CCSD American Institute of Physics
Résumé : International audience
In order to be able to provide valuable data in multiparameter measurement field operations, tiltmeters need to have a noise level better or equal than 10-9 rad for a period range from a few minutes to a few years and a long term stability ranging from 10-7 to 10-8 rad/yr. Tiltmeter measurements should also be as much as possible insensitive to thermal disturbances, by taking great care of the horizontality of the base line tube first. Secondly, thermal responses have been assessed. We also took great care of the coupling of our tiltmeters with the bedrock. We've designed a long base tiltmeter with sensors in silica which has a low dilatation coefficient. The linear variable displacement transducer is based on coil coupling (powered by an alternative voltage). Finally we show the results of two 100 m silica water tube tiltmeters which were installed in a mine in the French Vosges massif in the framework of a hydrology research project. These instruments show a remarkably good stability (6.5×10-9 rad/month) and a low noise level (of the order of 10-11 rad). Toroidal and spheroidal free modes of the Earth were observed after the two last major earthquakes on Sumatra.
ISSN: 0034-6748

hal-00708013
https://hal.archives-ouvertes.fr/hal-00708013
https://hal.archives-ouvertes.fr/hal-00708013/document
https://hal.archives-ouvertes.fr/hal-00708013/file/2008_RSI.pdf
BIBCODE : 2008RScI...79c4502B

Éditeur(s) : HAL CCSD
Résumé : This thesis has been conducted on a fractured crystalline basement located in Ploemeur (South of Brittany, France). The detailed study of this basement requires a good understanding of their internal structures, namely their intrinsic properties, flow mode, density and fractures distribution. This work is focused on the petrophysical characterization of the granitic formations. Physical properties were determined from downhole geophysical measurements and images, and petrophysical measurements with thin sections made for each mini-core in the laboratory. Fresh-altered schist and fresh-altered granite separated by a normal angle fault are the main lithology of the Ploemeur crystalline basement. The results showed that the petrophysical properties were function of both porosity variation and degree of alteration and that the pore-space topology was found to be porositydependent. This thesis introduces a new formula between electrical resistivity and porosity. In addition, the laboratory measurements of Ploemeur revealed that seismic wave velocity was a function not only of porosity, but also of the predominant pore type. In general, the pore aspect ratio inverted from velocity measurements were classified roughly into crack shape. In the Ploemeur crystalline basement, the downhole geophysical measurements and images were used to measure changes in physical and chemical properties in the borehole fluid and the bedrock surrounding the boreholes. The effective integration of different geophysical methods, hydrogeological tests and lithological description was the best way to characterize the fractures in the crystalline basement, and is critical for a suitable estimation of fluid circulation.
Le socle cristallin fracturé, situé à Ploemeur (Bretagne sud, France) est l'objet de ce travail de thèse. L'étude détaillée du socle nécessite une bonne compréhension de la structure interne, à savoir les propriétés intrinsèques, le mode d'écoulement, la densité et la distribution des fractures. Ce travail de thèse est consacré à la caractérisation pétrophysique des formations granitiques. Les propriétés physiques ont été déterminées à partir de l'interprétation des données de mesures de géophysique en forage, des images de paroi du puits et des mesures pétrophysiques réalisées sur carottes en laboratoire. Afin de replacer les mesures dans leur contexte lithologique, une lame mince a été analysée pour chaque mini-carotte. Les formations lithologiques rencontrées dans le socle cristallin de Ploemeur sont des schistes et granites sains et altérés, ces deux lithologies étant séparées par une zone de faille. Les résultats ont montré que les propriétés pétrophysiques des roches étaient fonction à la fois de la variation de la porosité et du degré d'altération des roches et que la topologie de l'espace poreux était fortement dépendante de la porosité. Cette thèse introduit une nouvelle formule entre la résistivité électrique et la porosité. De plus, les mesures en laboratoire sur les échantillons de Ploemeur révèlent que les vitesses sismiques ne sont pas seulement fonction de la quantité de porosité, mais aussi fonction de facteur de forme. Ce dernier a été calculé sur les échantillons du socle de Ploemeur à partir des vitesses acoustiques. Les résultats ont montré que la porosité est de forme fissurale. L'intégration des données issues des images optiques et acoustiques, des mesures de géophysique en forage, et de la description des carottes a permis d'étudier de façon détaillée la géologie et l'hydrodynamique du socle de Ploemeur. L'intégration effective de ces différentes méthodes avec les tests hydrogéologiques ressort comme la meilleure façon de caractériser les fractures et les circulations en eau dans le socle.
https://tel.archives-ouvertes.fr/tel-00444175

Droits : info:eu-repo/semantics/OpenAccess
tel-00444175
https://tel.archives-ouvertes.fr/tel-00444175
https://tel.archives-ouvertes.fr/tel-00444175/document
https://tel.archives-ouvertes.fr/tel-00444175/file/thesebelghoul.pdf

Éditeur(s) : HAL CCSD
Résumé : International audience
The purpose of this study is to identify links between the geothermal context and the conceptions in different initial teachers training, from the Caribbean and North America. The Caribbean Islands are located in a subduction zone, creating a great potential for geothermal energy. In Guadeloupe, this potential has been harnessed and a geothermal power plant produces about 5% of the local demand for electricity. It is called high temperature geothermy. In Quebec the bedrock mainly consists of ancient Precambrian rocks from the Canadian Shield, which does not allow for electricity production. The geothermal heat is used to regulate the temperature in buildings, to create spars, to grow crops and other purposes. It is called low temperature geothermy. This design-based research (Sandoval, W. et Al., 2004) takes part in the contextualization of sciences education research works (Blanchet, P. et Al., 2009, Anciaux, F. et Al., 2013) and in the continuation of the Gounouy project (Fecil, S. et Al., 2014). A project-based learning on geothermal energy has been set up with two groups of initial teachers training from the Université du Québec à Montréal (UQAM) and from the French West Indies University (UA). The purpose is to create collaborations between each group in order to enable them to encounter, recognize and formulate their conceptions. Further, they will collectively elaborate a more complex understanding of conceptions about geothermy. More specifically, the design used in this experiment aims to highlight context effects (Merlo-Leurette, S., Forissier, T., 2009). Context effects are pedagogical events occurring when there is a clash between the different conceptions of students, observed uring courses regarding different problematics related to geothermal energy. Communications via videoconferences were arranged so that the counterpart teams may discuss their investigative findings. Videos from the exchanges have been collected, as well as weekly summaries about student’s accomplishment, ideas, questions and feelings. Pre-test and post-test questionnaires on geothermal energy were submitted at the beginning and at the end of the project, to compare conceptions before and after the learning process. Collected data enables to bring out the student’s contextuality. Therefore, they highlight context effects, due to the differences between the geothermal contexts in Guadeloupe and in Montreal.This study is supported by the Geotref project.
CARIBBEAN ACADEMY OF SCIENCES 20 th GENERAL ASSEMBLY AND BIENNAL MEETING
Dehaies, Guadeloupe, France

hal-01534665
https://hal.univ-antilles.fr/hal-01534665

Éditeur(s) : HAL CCSD Blackwell Publishing
Résumé : International audience
Differentiating between forced regressive deposits from deglacial periods inhigh latitude domains and forced regressive deposits from the onset of glacialperiods in low latitude domains is fundamental for the accurate interpretationof glacial cycles within the geological record and then for thereconstruction of palaeogeography and palaeo-climate. A forced regressivedeglacial sequence is documented from the Lake Saint-Jean basin (Quebec,Canada). In this area, the Late Pleistocene to Holocene sediments haverecorded the Laurentide ice sheet retreat accompanied by the invasion ofmarine waters (Laflamme Gulf) from ca 129 cal kyr BP. Subsequently, fluviodeltaicand coastal prograding wedges were deposited; they followed thebase-level fall due to glacio-isostatic rebound. This succession, representinga transition from glacial to post-glacial periods within a previously glaciatedarea, was investigated through recent mapping, preserved landforms, faciesanalysis, and new optical stimulated luminescence and radiocarbon dates.Three basin-scale geological sections share a common lower part made ofisolated ice-contact fan deposits overlying bedrock. Throughout the entirebasin, ice-contact fans are capped by glacimarine muds. Above, fluvial andcoastal prograding systems were deposited and evolved through four steps:(i) deltaic systems progressively increased in width; (ii) coastal influence onsedimentation increased; (iii) hydrographic drainage systems became moreorganised; and (iv) deltas graded from steep (Gilbert delta) to low-angle foresets(mouth-bar delta). Deposited during the base-level fall from glacioisostaticrebound, the complete succession has been designated as a singlefalling stage system tract referred to as a deglacial falling stage system tract.It is representative of a deglaciation sequence in areas previously covered byice during glacial periods (i.e. medium to high latitude domains). Diagnosticcriteria are provided to identify such a deglacial falling stage system tract inthe geological record, which may aid identification of previously unknownglacial cycles.
ISSN: 1469-3496

insu-01184731
https://hal-insu.archives-ouvertes.fr/insu-01184731
DOI : 10.1111/sed.12196

Éditeur(s) : HAL CCSD
Résumé : International audience
Sub-continental lithospheric mantle rocks are exhumed at the foot of magma-poor distal passive margins as aresponse to extreme stretching of the continental crust during plate separation. Remnants of the Northern Iberianpaleo-passive margin are now exposed in the North-Pyrenean Zone (NPZ) and represent field analogues to studythe processes of continental crust thinning and subcontinental mantle exhumation. The NPZ results from theinversion of basins opened between the Iberia and Europa plates during Albo-Cenomanian times. In the westernNPZ, the ‘Chaînons Béarnais’ ranges display a fold-and-thrust structure involving the Mesozoic sedimentarycover, decoupled from its continental basement and associated with peridotite bodies in tectonic contact withPalaeozoic basement lenses of small size. Continental extension developed under hot thermal conditions, asdemonstrated by the syn-metamorphic Cretaceous ductile deformation affecting both the crustal basement and theallochthonous Mesozoic cover.In this study, we present structural and geochemical data providing constraints to reconstruct the evolution ofthe northern Iberia paleo-margin. Field work confirms that the pre-rift Mesozoic cover is intimately associatedto mantle rocks and to thin tectonic lenses of crustal basement. It also shows that the pre-rift cover was detachedfrom its bedrock at the Keuper evaporites level and was welded to mantle rocks during their exhumation atthe foot of the hyper-extended margin. The crust/mantle detachment fault is a major shear zone characterizedby anastomosed shear bands defining a plurimetric phacoidal fabric at the top of the serpentinized mantle. Thedetachment is marked by a layer of metasomatic rocks, locally 20 meters thick, made of talc-chlorite-pyrite-richrocks that developped under greenschist facies conditions. Raman Spectroscopy on Carbonaceous Materials(RSCM), performed on the Mesozoic cover reveal that the entire sedimentary pile underwent temperatures rangingbetween 200C and 480C.We show that: (i) at the site of mantle rocks exhumation, the boudinaged pre-rift sediments have undergone drasticsyn-metamorphic thinning with the genesis of a S0/S1 foliation and, (ii) the Paleozoic basement has been ductilelydeformed, into thin tectonic lenses that remained welded to the exhumed mantle rocks. Therefore the overallcrustal rheology appears dominated by shallow levels having a ductile behavior. This rheology is related to thepresence of a thick pre- and syn-rift decoupled cover acting as an efficient thermal blanket. This new geologicaldata set highlights important characteristics of ductile-type hyper-extended passive margin that cannot be obtainedfrom the study of seismic lines. Finally, we stress that studying field analogues represents a major tool to betterunderstand the mechanisms of extreme crustal thinning associated with mantle exhumation and their structuralinheritance during tectonic inversion.
Geophysical Research Abstracts
Vienne, Austria

insu-01510103
https://hal-insu.archives-ouvertes.fr/insu-01510103

Éditeur(s) : HAL CCSD
Résumé : Among erosion processes, river incision is classicaly described as a key process controlling erosion of landscapes. Incision efficiency is mainly influenced by climate and erodibility. This latter is not only dependent on the nature of the bedrock, but also on its past deformation, which affects its rheological effective properties, such as fracture density. The main objectives of this thesis are: (1) to better constrain the relationship between effective properties and erodibility, and (2) to quantify the influence of erodibility and erosion on both the temporal and spatial building or decay of the topography. Several numerical tools are developed. A 1D formalism of landscape evolution is introduced, including river incision with stochastic distribution of water discharge and hillslope landsliding. A new remeshing algorithm called Surface Lagrangian Remeshing (SLR) is developed as a complement to remeshing algorithms dealing with internal elements. It allows one to take into account long-term erosion into 2D Lagrangian numerical codes based on triangular finite elements. Then the potentiality of measuring erodibility in-situ using a Schmidt hammer (R) is assessed for the active orogen of Taiwan, the diagenetic Annot sandstones and St Clement fault zone. Results suggest a strong control of R by effective properties. A linear model based on effective medium theory is applied to a fault zone with an unmacthed resolution (750 measures, 25 measures per square meter). The model successfully correlates R to fracture density. These results demonstrate that effective elasticity as well as erodibility are sensitive to the density and type of fractures. Finally I focus on the erosional and rheological conditions that allows reproducing post-orogenic evolution of mountain belts. A model coupling surface erosion and regional isostatic uplift is consistent with observations. The topographic decay and decrease of the ratio of surface elevation over crustal root thickness is at first order controlled by the initial geometry of the mountain belt and erosion efficiency. This new model highlights the control ofclimate and erodibility on the topographic decay and of lithospheric rheology on the perseverance of crustal roots.
Parmi les processus d'érosion, l'incision des rivières est classiquement décrit comme un processus clé contrôlant l'érosion des paysages. L'efficacité de l'incision est principalement influencée par le climat et par l'érodabilité. Ce dernier paramètre ne dépend pas seulement de la nature du substratum rocheux, mais aussi de sa déformation passée qui affecte ses propriétés rhéologiques équivalentes. Les principaux objectifs de cette thèse sont: (1) de mieux contraindre les relations entre propriétés équivalentes et érodabilité, et (2) de quantifier l'influence de l'érosion et de l'érodabilité sur la formation ou la décadence, spatiale et temporelle, de la topographie. Plusieurs outils numériques sont développés. Un formalisme 1D d'évolution des paysages est proposé, prenant en compte simultanément l'incision des rivières avec une distribution stochastique des débits en eau et l'érosion des versants par glissements de terrain. Un nouvel algorithme de remaillage appelé Surface Lagrangian Remeshing (SLR) est développé. Il permet de prendre en compte l'érosion à long terme dans les codes numériques 2D Lagrangiens basés sur des éléments finis triangulaires. Ensuite, la possibilité de mesurer in-situ l'érodabilité avec un marteau de Schmidt (R) est évaluée pour: l'orogène actif de Taiwan, les grès diagénétiques d'Annot et la zone de faille de St Clément. Les résultats suggèrent un fort contrôle de R par les propriétés équivalentes des roches testées. Un modèle linéaire, basé sur la théorie des milieux équivalents, est appliqué à une zone de faille avec une résolution inégalée (750 mesures, 25 mesures par mètre carré). Le modèle permet de corréler avec succès la densité de fracture et R. Ces résultats démontrent empiriquement que l'élasticité équivalente ainsi que l'érodabilité sont sensibles à la densité et à la nature des fractures. Enfin j'étudie les conditions d'érosion et de rhéologie qui permettent de reproduire l'évolution des chaînes de montagnes post-orogéniques. Un modèle couplant érosion en surface et soulèvement isostatique régional est compatible avec les observations. Les taux de décroissance topographique et de diminution du rapport de l'élévation de surface sur l'épaisseur de racine crustale sont contrôlés au premier ordre par la géométrie initiale de la chaîne de montagne et par l'efficacité de l'érosion. Ce nouveau modèle met en évidence le contrôle du climat et de l'érodabilité sur la décroissance topographique et de la rhéologie lithosphérique sur la persévérance des racines crustales.
https://tel.archives-ouvertes.fr/tel-00602341

tel-00602341
https://tel.archives-ouvertes.fr/tel-00602341
https://tel.archives-ouvertes.fr/tel-00602341/document
https://tel.archives-ouvertes.fr/tel-00602341/file/thesephilippesteer.pdf

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
Past earthquake slips on faults are commonly determined by measuring morphological offsets at current ground surface. Because those offsets might not always be well preserved, we examine whether the first 10 m below ground surface contains relevant information to complement them. We focus on the Te Marua site, New Zealand, where 11 alluvial terraces have been dextrally offset by the Wellington fault. We investigated the site using pseudo-3D Ground Penetrating Radar and also produced a high-resolution digital elevation model (DEM) of the zone to constrain the surface slip record. The GPR data reveal additional information: (1) they image the 3D stratigraphic architecture of the seven youngest terraces and show that they are strath terraces carved into graywacke bedrock. Each strath surface is overlain by 3-5 m of horizontally bedded gravel sheets, including two pronounced and traceable reflectors; (2) thanks to the multilayer architecture, terrace risers and channels are imaged at three depths and their lateral offsets can be measured three to four times, constraining respective offsets and their uncertainties more reliably; and (3) the offsets are better preserved in the subsurface than at the ground surface, likely due to subsequent erosion-deposition on the latter. From surface and subsurface data, we infer that Te Marua has recorded six cumulative offsets of 2.9, 7.6, 18, 23.2, 26, and 31 m (± 1-2 m). Large earthquakes on southern Wellington fault might produce 3-5 m of slip, slightly less than previously proposed. Pseudo-3D GPR thus provides a novel paleoseismological tool to complement and refine surface investigations
ISSN: 2169-9313

hal-00873350
https://hal.archives-ouvertes.fr/hal-00873350
DOI : 10.1002/jgrb.50317

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The dating of alluvial landforms by cosmogenic nuclides requires distinguishing the pre-deposition inheritance from the post-deposition history of the clasts in the studied marker. Moreover, estimating catchment-scale erosion rates from the concentrations of cosmogenic nuclides in active alluvia requires a good knowledge of the local/regional relationships between rock exhumation and transport through space and time. This is still poorly known for timescales of tens of thousand years. In order to document the evolution of clast exhumation and transport rates through time, we analyze in situ 10Be concentrations in boulders and cobbles from hillslopes to outlet of an arid mountainous catchment located in Gobi-Altay, Mongolia, strongly affected by global climatic changes during the Pleistocene-Holocene period. Samples were collected on bedrock, abandoned alluvial deposits, active colluvia and alluvia. Our results show a large 10Be scattering in the active river bed, consistent with a low and discontinuous catchment erosion rate dominated by mass wasting and fluvial incision. On the contrary, pre-exposure signal within abandoned terraces is much more homogeneous, consistent with climatic pulses responsible of strong erosional events on hillslopes and rapid fluvial transport. These results show that exhumation/transport processes at the catchment scale vary in style and intensity through time as a consequence of climatic oscillations. The occurrence of abrupt climatic changes during short periods of time recorded by 10Be concentrations in abandoned alluvia raise questions about the temporal applicability of catchment erosion rates derived from cosmogenic nuclide concentrations measured in sediments of active rivers. On the other hand, strong and short erosion events limit and homogenize the pre-exposure 10Be signal in associated deposits like debris-flows, making them particularly suitable markers for dating in active tectonic and paleoclimatic studies.
ISSN: 0169-555X

hal-00626702
https://hal.archives-ouvertes.fr/hal-00626702
https://hal.archives-ouvertes.fr/hal-00626702/document
https://hal.archives-ouvertes.fr/hal-00626702/file/GEOMOR-2485R1_corrected.pdf
DOI : 10.1016/j.geomorph.2011.07.023