Éditeur(s) : Taylor & Francis Ltd
Résumé : A new benthic phototrophic dinoflagellate is described from sediments of a tropical marine cove at Martinique Island and its micromorphology is studied by means of light and electron microscopy. The cell contains small golden-brown chloroplasts and the oval nucleus is posterior. It is laterally compressed, almost circular in shape when viewed laterally. It consists of a small epitheca tilted toward the right lateral side and a larger hypotheca. In the left view, the cingulum is more anterior and the epitheca is reduced. The cingulum is displaced and left-handed. This organism is peculiar in having no apical pore and its thecal plate arrangement is 2 ' 1a 7 '' 5c 3s 5 ''' 1 ''''. The plates are smooth with small groups of pores scattered on their surface. An area with 60-80 densely arranged pores is found near the centre of the 2 ''' plate, on the left lateral side. Morphologically, these features are different from all other laterally compressed benthic genera. In addition, molecular genetic sequences of SSU and partial LSU form a distinct and well-supported clade among dinoflagellates and support the erection of a new genus. However, molecular phylogenies inferred from ribosomal genes failed to confirm any clear relationship with other benthic taxa and affinity with other laterally compressed dinoflagellates has not been demonstrated. Hence, the taxonomic affinity of Madanidinium loirii with a defined order and family is unclear at the moment.
European Journal Of Phycology (0967-0262) (Taylor & Francis Ltd), 2014-04 , Vol. 49 , N. 2 , P. 165-178

Droits : 2014 British Phycological Society
http://archimer.ifremer.fr/doc/00195/30622/29458.pdf
DOI:10.1080/09670262.2014.898797
http://archimer.ifremer.fr/doc/00195/30622/

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The ∼55 km-long Firouzkuh fault is located in the Central Alborz Mountains of Iran. It is a left-lateral fault, which dips to the south, and possesses a small dip-slip component of motion that we interpret to result from extension. The ratio of horizontal to vertical displacement across the fault, calculated from the cumulative displacement of landscape features, is 7.6. We provide constraints on the timing of the last earthquake on the Firouzkuh fault from two trenches (T1 and T2) across the fault zone, excavated in 2004, and located east of Firouzkuh city. The trenches expose faulted sedimentary deposits. Two optically-stimulated luminescence (OSL) ages from sediments in the lower part of trench T1 date from the late Pleistocene (15.9 ± 0.9 ka and 27.1 ± 1.7 ka). The younger of the two dated units in T1 is displaced vertically across the fault by 2.2–4.4 m, from which we estimate a strike-slip displacement of 18.2–33.4 m, and hence a average horizontal slip-rate of 1.1–2.2 mm/yr. The sediments exposed in T1 do not yield constraints on the most recent earthquake history. In trench T2, however, human skeletal remains of a middle aged male, which yield a radiocarbon age of 1159 ± 28 BP (corresponding to a mean calendar age of 791 AD), were found within a faulted alluvial layer at a depth of 60–70 cm from the surface. The existence of these medieval human places shows that a surface-rupturing earthquake occurred at some time after 1159 ± 28 BP. The amount of slip in each earthquake on the Firouzkuh fault is difficult to estimate, but assuming the entire ∼55 km fault length ruptures in each event, they will have had a maximum magnitude of 7.1. At our estimated late Quaternary slip-rate of ∼1.1–2.2 mm/yr magnitude 7.1 earthquakes, involving ∼1.2 m average displacement, would be expected to occur every ∼1100–540 years. As the last earthquake on the Firouzkuh fault may be up to ∼700 years in age we suggest that the Firouzkuh fault is a major hazard for earthquakes in the near future.
ISSN: 0743-9547

hal-01122835
https://hal.archives-ouvertes.fr/hal-01122835
DOI : 10.1016/j.jseaes.2013.12.018

Éditeur(s) : Copernicus Gesellschaft Mbh
Résumé : During the GWADASEIS cruise (Lesser Antilles volcanic arc, February-March 2009) a very high resolution (VHR) seismic-reflection survey was performed in order to constrain Late Quaternary to Present faulting. The profiles we obtained evidence frequent "ponding" of reworked sediments in the deepest areas, similar to the deposition of Mediterranean "homogenites". These bodies are acoustically transparent (few ms t.w.t. thick) and are often deposited on the hanging walls of dominantly normal faults, at the base of scarps. Their thickness appears sufficient to compensate (i.e. bury) co-seismic scarps between successive earthquakes, resulting in a flat and horizontal sea floor through time. In a selected area (offshore Montserrat and Nevis islands), piston coring (4 to 7m long) was dedicated to a sedimentological analysis of the most recent of these particular layers. It corresponds to non-stratified homogenous calcareous silty sand (reworked calcareous plankton and minor volcanoclastics). This layer can be up to 2 m thick, and overlies fine-grained hemipelagites. The upper centimeters of the latter represent the normal RedOx water/sediment interface. Pb-210 and Cs-137 activities lack in the massive sands, while a normal profile of unsupported Pb-210 decrease is observed in the hemipelagite below, together with a Cs-137 peak corresponding to the Atmospheric Nuclear Experiments (1962). The RedOx level was thus capped by a recent instantaneous major sedimentary event considered as post-1970 AD; candidate seismic events to explain this sedimentary deposits are either the 16 March 1985 earthquake or the 8 October 1974 one (M-w = 6.3 and M-w = 7.4, respectively). This leads to consider that the syntectonic sedimentation in this area is not continuous but results from accumulation of thick homogenites deposited after the earthquakes (as observed in the following weeks after Haiti January 2010 event, McHugh et al., 2011). The existence of such deposits suggests that, in the area of study, vertical throw likely results from cumulated effects of separated earthquakes rather than from aseismic creep. Examination of VHR profiles shows that all major co-seismic offsets are recorded in the fault growth sequence and that co-seismic offsets can be precisely estimated. By using a sedimentation rate deduced from Pb-210 decrease curve (0.5 mmyr(-1)) and taking into account minor reworking events detected in cores, we show that the Redonda system may have been responsible for five > M-6 events during the last 34 000 yr. The approach presented in this work differs from fault activity analyses using displaced sets of isochronous surfaces and postulating co-seismic offsets. Combining VHR seismic imagery and coring we can decipher co-seismic vs. slow continuous displacement, and thus actually estimate the amplitude and the time distribution of major co-seismic offsets.
Natural Hazards And Earth System Sciences (1561-8633) (Copernicus Gesellschaft Mbh), 2012 , Vol. 12 , N. 5 , P. 1755-1767

Droits : Author(s) 2012. CC Attribution 3.0 License.
http://archimer.ifremer.fr/doc/00089/20040/21990.pdf
DOI:10.5194/nhess-12-1755-2012
http://archimer.ifremer.fr/doc/00089/20040/

Éditeur(s) : HAL CCSD Elsevier
Résumé : We present field data from segmented normal faults having particular displacement and overlapping geometries that may be related to down-dip branching of the fault segments. Based on a 3-D numerical modeling study of computed displacement and stress fields around different geometries of down-dip branched normal fault segments, we show that the bends of fault surfaces that coalesce at depth exert a significant influence on (I) the displacement distribution on the fault segment branches and (2) the quasi-static stress fields around the relay zones. The asymmetry in the displacement profiles and low fault interaction at relay zones modeled are consistent with the fault segment geometries observed in field data. As an application, we model the geometry and interaction of the Vallo di Diano normal fault which is segmented at the Earth's surface and which produced an earthquake of magnitude 6.4 along a single fault surface at depth. Numerical modeling of the segmented fault produces an asymmetric displacement profile and low shear stress at the relay zone consistent with the profile and fault interaction inferred from the held. We conclude that asymmetry of the displacement profile and large overlap/separation ratio of the unlinked relay zone can be indicators of the presence of a continuous fault surface underneath. These geometrical attributes are therefore important to consider in the probabilistic analysis of seismic hazard along segmented normal faults.
ISSN: 0191-8141

hal-00411161
https://hal.archives-ouvertes.fr/hal-00411161
DOI : 10.1016/j.jsg.2008.07.005

Éditeur(s) : HAL CCSD
Résumé : In Taiwan , the subduction of the Chinese continental margin under the Luzon arc results in the progressive growth of an active orogenic wedge. It is one of the best places to study the complex relationships that occurs between the tectonic processes controlling deformation (plate rheology and kinematics, metamorphism and magmatism) and surface processes (erosion and sedimentation). In order to study the kinematics of the present day convergence of Philippine Sea plate to the Asian continent around Taiwan, we perform 2D and 3D sandbox modeling and we analyzed the models with PIV (Particle Image Velocimetry) software. In 2D experiments, a model Coulomb wedge is submitted to erosion and sedimentation under topography and flux steady state conditions. The 3D experiments are mainly used to study the escape tectonics occurring in the middle west and southwest Taiwan. A wedge shaped indenter and a basement relief were used to simulate the mechanical plate boundary between Philippine Sea plate and Eurasia plate and the basement topography to the west of Taiwan respectively. We examine the exhumation patterns, the mode of fault propagation and displacement patterns by strain partitioning of vertical vs. horizontal displacement and convergent parallel vs. orogen parallel components. The preliminary conclusions are: 1. The interactions between tectonics, erosion and sedimentation control geometry and kinematics of the doubly vergent transpressional orogen. 2. Exhumation processes are controlled by the balance between erosion, frontal accretion and underplating in different structural domains of the wedge. 3. Retrowedge erosion favorites backfolding and backthrusting, induces flower structures and fan shaped cleavage distribution. 4. Sedimentation promotes underplating and out-of sequences thrusting. 5. Continental subduction or subduction of topographic highs will enhance underthrusting/underplating, thick-skin tectonics and inversion of sedimentary basin.
Bolletino di Geofisica teorica ed applicata

hal-00411133
https://hal.archives-ouvertes.fr/hal-00411133

Éditeur(s) : HAL CCSD Geological Society of America
Résumé : orogenic wedges
Interaction between surface and tectonic processes plays a key role in the structural evolution, kinematics, and exhumation of rocks in orogenic wedges. The deformation patterns observed in analog models show that strain partitioning has a strong impact on the vertical component of displacement of tectonic units, which in return favors erosion in domains of important uplift. Partitioning is controlled by tectonic processes and by climate-dependent surface processes, including erosion and sedimentation. The effects of partitioning include localization of deformed domains, exhumation above areas of deep underplating, and steady-state maintenance of wedges for long time periods. Simple models illustrate well how the morphostructural evolution of mountain belts is determined by these complex interactions.
ISSN: 1052-5173

hal-00558931
https://hal.archives-ouvertes.fr/hal-00558931
DOI : 10.1130/GSATG48A.1

Éditeur(s) : HAL CCSD MAIK Nauka/Interperiodica
Résumé : Interaction between surface processes and deep tectonic processes plays a key role in the structural evolution, kinematics and exhumation of rocks in orogenic wedges. The deformation patterns observed in analogue models applied to natural cases of present active or ancient mountain belts reflect several first order processes that result of these interactions. Internal strain partitioning due to mechanical behaviour of a thrust wedge has a strong impact on the vertical component of displacement of tectonic units that in return favour erosion in domains of important uplift. Such strain partitioning is first controlled by tectonic processes, but surface processes exert a strong feed back on wedge dynamics. Indeed, material transfer in thrust wedges not only depends on its internal dynamics, it is also influenced by climate controlled surface processes involving erosion and sedimentation. Effects of erosion are multiple: they allow long term localization of deformed domains, they favour important exhumation above areas of deep underplating and combined with sedimentation in the foreland they contribute to maintain the wedge in a critical state for long time periods. The simple models illustrate well how mountain belts structure, kinematics of tectonic units and exhumation are determined by these complex interactions.
ISSN: 0016-8521

hal-00561361
https://hal.archives-ouvertes.fr/hal-00561361
DOI : 10.1134/S0016852110060075

Éditeur(s) : HAL CCSD Seismological Society of America
Résumé : With the assistance of the ASTER team (M. Arnold, G. Aumaître, D. Bourlès, and K. Keddadouche)
International audience
The Bulnay earthquake of 23 July 1905 (Mw 8.3–8.5), in north‐central Mongolia, is one of the world’s largest recorded intracontinental earthquakes and one of four great earthquakes that occurred in the region during the twentieth century. The 375 km long surface rupture of the left‐lateral, strike‐slip, N095°E‐trending Bulnay fault associated with this earthquake is remarkable for its pronounced expression across the landscape and for the size of features produced by previous earthquakes. Our field observations suggest that in many areas the width and geometry of the rupture zone is the result of repeated earthquakes; however, in those areas where it is possible to determine that the geomorphic features are the result of the 1905 surface rupture alone, the size of the features produced by this single earthquake are singular in comparison to most other historical strike‐slip surface ruptures worldwide. Along the 80 km stretch, between 97.18° E and 98.33° E, the fault zone is characterized by several meters width and the mean left‐lateral 1905 offset is 8.9±0.6  m with two measured cumulative offsets that are twice the 1905 slip. These observations suggest that the displacement produced during the penultimate event was similar to the 1905 slip. Morphotectonic analyses carried out at three sites along the eastern part of the Bulnay fault allow us to estimate a mean horizontal slip rate of 3.1±1.7  mm/yr over the Late Pleistocene–Holocene period. In parallel, paleoseismological investigations show evidence for two earthquakes prior to the 1905 event, with recurrence intervals of ∼2700–4000  yrs.
ISSN: 0037-1106

hal-01179837
https://hal.archives-ouvertes.fr/hal-01179837
https://hal.archives-ouvertes.fr/hal-01179837v2/document
https://hal.archives-ouvertes.fr/hal-01179837/file/rizza2015.pdf
DOI : 10.1785/0120140119

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We present a new set of brittle microtectonic measurements carried out in the Pliocene and Quaternary rocks outcropping in several key sectors of the western Betic and Rif orogen, the so-called Gibraltar orogenic arc. This data set, along with available earthquake focal mechanisms and borehole breakouts, allowed us to compile the Pliocene and Quaternary stress map of this area. This map provides new constraints for tectonic models and the present-day tectonic activity of the proposed active eastward subduction of oceanic lithosphere beneath the Gibraltar Arc and roll-back. The horizontal maximum compressive stress (S-Hmax) is NW-SE in the Betic Orogen and N-S/NNW-SSE in the southern Rif Cordillera. There is a significant consistency between S-Hmax and the displacement field deduced from GPS measurements with respect to the African plate: both appear to reflect the NW-SE convergence between the African and the European plates that is perturbed in the Rif. We propose that part of the eastern Rif behaves as a quasi-rigid block welded to the stable African plate. This block is bounded by important faults that localized most of the deformation disturbing the stress and surface displacement field. Pliocene to Quaternary N-S to NW-SE Africa-Europe plate convergence seem to be associated to the reorganization of the remnant Early Miocene subduction system in a continental-continental collision framework. Three-dimensional reconstruction of available seismic tomography plotted against the intermediate seismicity shows that only part of the old subduction system, whose orientation ranges from N20 degrees E to N100 degrees E, remains active: the portion ranging from N30 degrees E to N40 degrees E, orthogonal to the regional convergence. (C) 2011 Elsevier Ltd. All rights reserved.
ISSN: 0264-3707

hal-00671033
https://hal.archives-ouvertes.fr/hal-00671033
DOI : 10.1016/j.jog.2010.12.003

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Aegean domain is a key area for understanding the processes of back-arc extension. Observed deformation pattern and present day kinematics result from the interaction between the southward retreat of the Hellenic trench and the westward escape of Anatolia. Lithosphere-scale analogue models were employed to display that the overall pattern of Aegean extension requires not only the combination of trench retreat and Anatolia escape since middle Miocene but also the presence of an inherited lithosphere-scale mechanical discontinuity: the Vardar Suture Zone (VSZ). The reactivation in dextral shear of the eastern branch of the VSZ accommodates both the trench retreat (NS stretching) and the westward escape of Anatolia (EW shortening) in the Cyclades area since middle Miocene. Additionally, our model shows that the North Anatolian Fault (NAF) is a late structure in the evolution of the Aegean, initiated around 10 Ma after the onset of Anatolia escape. The displacement field at the surface of the model allows the identification of sub-domains, which result from strain partitioning instead of being "rigid microplates", directly comparable to the present-day displacement field (GPS) of the Aegean and western Anatolia. Our model provides a simple but powerful way to look at the dynamics of Aegean extension in two main stages. From middle Eocene to middle Miocene, extension was only driven by the southward retreat of the Hellenic trench at a rate lower than 1 cm*y− 1. Since middle Miocene, the combination of slab rollback with Anatolia westward escape resulted in a southwest direction of trench retreat, with an accelerating rate of up to 3 cm*y− 1.
ISSN: 0040-1951

insu-01066042
https://hal-insu.archives-ouvertes.fr/insu-01066042
https://hal-insu.archives-ouvertes.fr/insu-01066042/document
https://hal-insu.archives-ouvertes.fr/insu-01066042/file/Philippon-brun-tect-2014-HAL.pdf
DOI : 10.1016/j.tecto.2014.04.039

Éditeur(s) : HAL CCSD
Résumé : The Karakorum Fault zone (KFZ), lying in the west of the Tibetan plateau, is an important dextral strike-slip fault and the important northern geological boundary of the west Himalaya. In the AyilaRi' gyu Range-Gai Basin area lying in the southeast of the KFZ, Ar-40/Ar-39 thermochronologic analysis was performed on the syn-tectonic minerals in the, metamorphic rocks in the Karakorum ductile shear zone, with the base of petrology and deformation structure researches. According to the microstructure features, the minerals in the shear zone recorded the continuous deformation from high ( > 600 degrees C) to low temperature ( < 250 degrees C) appeared as that the nearly horizontal dextral shearing has transformed into the oblique dextral normal slip, made the greenschist facies of deformation stack oil the early medium-high temperature deformation, indicated the uplift during the slip. The thermochronologic revealed the continuous shear process from the early Miocene to 4Ma at least, which containing three rapid cooling stage: from 25 similar to 22Ma to 21 similar to 18Ma, the deformation locally stopped or slower in the, shallow high temperature shear process; from 15Ma to 12Ma, the rapid uplift of the AyilaRi' gyu Range, the initial formation of the Gar Basin together with the main deep incision of river during the strip-slip of the KFZ; since 9Ma, the AyilaRi' gyu Range has increased the rapid uplift and the Gar Basin has formed finally. According to the different levels of deformation and the dextral displacement of the surface landform with different ages, the long term slip rate and the uplift rate indicated the intense dextral strike slip and uplift associated since the late Quarternary Period.
Acta Petrologica Sinica

hal-00411572
https://hal.archives-ouvertes.fr/hal-00411572

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
In this study, we quantify and analyze the spatial and temporal evolution of the surface displacement of Kahrod landslide located in the center of Alborz range (Iran) within the Haraz valley. This landslide represents a threat for this main drainage axis and its numerous infrastructures. We present three sets of displacement vectors based on GPS technique. An 8-benchmark network has been surveyed four times on a 1-year period basis. It provides accurate information on the rate of displacement within the landslide, and addresses the problem of the mechanical resistance of a small hillock, down slope, under the stress imposed by the landslide. Then. this network is densified (57 marks) and measured twice in 6 months using a rapidstatic approach. This yields to a dense description of surface deformation over the whole landslide. Finally, a 1-year time series of permanent GPS recordings is presented and compared to rainfall. Furthermore, we analyze Envisat radar differential interferograms (DInSAR) spanning the same period as permanent GPS. These geodetic data allow to precisely determine the limits of the current sliding zone and to describe the spatial and temporal evolution of surface displacement. The combination of geodesy and field observations leads to a precise description of the past and present kinematics behavior of Kahrod landslide. The chaotic nature of the sliding mass suggests a first catastrophic landslide in a first episode. During the period of observation, the landslide appears to deform quite steadily, and the evidence of short-term correlation between rainfall and deformation amplitude needs to be confirmed by future measurements. Carrying on the acquisition of GPS and InSAR data within the sliding mass but also within adjacent bedrock should give fundamental information with regards to major activation processes (river sapping, water seeping, earthquakes, or failure within the frontal hill of bedrock) and their potential consequences.
ISSN: 1435-9529

hal-00411318
https://hal.archives-ouvertes.fr/hal-00411318
DOI : 10.1016/j.enggeo.2008.02.013

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
Observations from deep boreholes at several locations worldwide, laboratory measurements of frictional strength on quartzo-feldspathic materials, and earthquake focal mechanisms indicate that crustal faults are strong (apparent friction μ ≥ 0.6). However, friction experiments on phyllosilicate-rich rocks and some geophysical data have demonstrated that some major faults are considerably weaker. This weakness is commonly considered to be characteristic of mature faults in which rocks are altered by prolonged deformation and fluid-rock interaction (i.e., San Andreas, Zuccale, and Nankai Faults). In contrast, in this study we document fault weakening occurring along a marly shear zone in its infancy (<30 m displacement). Geochemical mass balance calculation and microstructural data show that a massive calcite departure (up to 50 vol %) from the fault rocks facilitated the concentration and reorganization of weak phyllosilicate minerals along the shear surfaces. Friction experiments carried out on intact foliated samples of host marls and fault rocks demonstrated that this structural reorganization lead to a significant fault weakening and that the incipient structure has strength and slip behavior comparable to that of the major weak faults previously documented. These results indicate that some faults, especially those nucleating in lithologies rich of both clays and high-solubility minerals (such as calcite), might experience rapid mineralogical and structural alteration and become weak even in the early stages of their activity.
ISSN: 0278-7407

hal-01211481
https://hal.archives-ouvertes.fr/hal-01211481
DOI : 10.1002/2014TC003716

Éditeur(s) : HAL CCSD
Résumé : This work provides new constraints on the development and on the distribution of the deformation in the upper mantle and particularly beneath transform plate boundaries. USArray experiment and the remarkable increase of the dataset in California for the past ten years allowed us to scrutinize the lateral variations of the anisotropy in the vicinity of the San Andreas Fault zone. We have confirmed and increased the detection of two layers of anisotropy beneath this plate boundary. The first layer, located in the lithosphere, is related to the deformation induced at the fault, and the other one, located in the asthenosphere, is coherent with the anisotropy observed far from it, its origin is however less clear. We show that the deformation zone associated both to the San Andreas, Calaveras and Hayward Faults, is likely 40 km wide at 70 km depth. We then performed numerical thermomechanical modeling (ADELI) of the displacement of a transform plate boundary associated with the computation of the development of crystallographic fabrics using a viscoplastic selfconsistent approach (VPSC). We analyzed the distribution of the deformation in the model ant looked after the possible interactions at depth between deformation caused at surface by the strike-slip dynamic of the fault and the shearing at the base of the lithosphere caused by the horizontal displacement of the plates. Elastic properties derived from the crystallographic fabrics modeled, show that such interactions exist and induce, beneath the fault zone, a progressive rotation of the crystallographic fabrics with depth. Seismological signature of these smooth rotations is however not relevant with the presence of two anisotropic layers as proposed beneath California. We thus consider that a decoupling zone exists between the lithosphere and the asthenosphere beneath the California to account for the sharp separation between a lithospheric and an asthenospheric deformation. We furthermore estimate that anisotropy observed far form the San Andreas Fault in California cannot be explained only by the drag of the asthenosphere by the North America lithosphere as proposed in our article. Indeed, we can only expect few tenths of second of splitting delay from the anisotropic properties derived from the numerical modeling of a plate moving in the same direction and in the same velocity than the North American lithosphere only for 10 Ma of displacement. As delays observed in California rather reach 1.5 s, anisotropy in this region thus requires the existence of an active asthenospheric flow to be explained.
Le travail réalisé pendant cette thèse a permis d'apporter de nouvelles contraintes sur le développement et la distribution de la déformation dans le manteau supérieur et plus particulièrement au niveau des grandes limites de plaques décrochantes. Grâce à l'apport de l'expérience USArray et d'une dizaine d'années d'enregistrements sismologiques supplémentaires, nous avons pu étudier, de manière précise, les variations d'anisotropie dans le voisinage de la Faille de San Andreas. Nous avons confirmé et étendu l'observation de deux couches anisotropes sous cette limite de plaque. On y observe une première couche localisée dans la lithosphère marquant la déformation induite à la limite de plaque, et une autre, asthénosphérique, cohérente avec l'anisotropie observée loin de la faille et d'origine plus discutée. Nous avons montré que la zone de déformation associée aux failles de San Andreas, Calaveras et d'Hayward a, vraisemblablement, une largeur d'au moins 40 kilomètres en base de lithosphère, sous chacune de ces failles. Nous avons ensuite procédé à la modélisation thermomécanique (ADELI) de la migration d'une limite de plaques décrochante couplée à une modélisation du développement de fabriques cristallographiques par une approche viscoplastique auto-cohérente (VPSC). Ceci nous a permis d'y observer le développement de la déformation et les conséquences des possibles interactions entre la déformation décrochante en surface et le cisaillement en base de lithosphère dû au déplacement horizontal des plaques. Les propriétés élastiques déduites des fabriques cristallographiques modélisées montrent que de telles interactions existent et provoquent, sous la limite de plaques, une rotation des orientations cristallographiques avec la profondeur. Le signal associé à ces rotations progressives n'est toutefois pas cohérent avec la présence de deux couches d'anisotropie comme proposée sous la faille de San Andreas. Nous pensons par conséquent qu'il existe, sous la Californie, une zone de découplage entre la lithosphère et l'asthénosphère, permettant d'individualiser une déformation lithosphérique d'une déformation asthénosphérique. Nous estimons, en outre, que l'anisotropie observée dans l'asthénosphère sous la Californie ne peut être expliquée seulement par le cisaillement induit par le déplacement de la lithosphère Nord Amérique. En effet, les propriétés anisotropes obtenues par modélisation à partir d'une plaque se déplaçant dans une direction et une vitesse proche de celle de la plaque Amérique du Nord montrent qu'on ne peut espérer guère plus que quelques dixièmes de seconde de délai au bout de 10 Ma de déplacement. Les déphasages mesurés en Californie étant de l'ordre de 1,5 s, il est donc nécessaire d'invoquer la présence d'écoulements mantelliques actifs sous cette région.
https://tel.archives-ouvertes.fr/tel-00767124

tel-00767124
https://tel.archives-ouvertes.fr/tel-00767124
https://tel.archives-ouvertes.fr/tel-00767124/document
https://tel.archives-ouvertes.fr/tel-00767124/file/theseBonnin.pdf

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
To estimate the seismic hazard, the geometry (dip, length and orientation) and the dynamics (type of displacements and amplitude) of the faults in the area of interest need to be understood. In this paper, in addition to geomorphologic observations, we present the results of two ground penetrating radar (GPR) campaigns conducted in 2010 and 2011 along the Emeelt fault in the vicinity of Ulaanbaatar, capital of Mongolia, located in an intracontinental region with low deformation rate that induces long recurrence time between large earthquakes. As the geomorphology induced by the fault activity has been highly smoothed by erosion processes since the last event, the fault location and geometry is difficult to determine precisely. However, by using GPR first, a non-destructive and fast investigation, the fault and the sedimentary deposits near the surface can be characterized and the results can be used for the choice of trench location. GPR was performed with a 50 MHz antenna over 2-D lines and with a 500 MHz antenna for pseudo-3-D surveys. The 500 MHz GPR profiles show a good consistency with the trench observations, dug next to the pseudo-3-D surveys. The 3-D 500 MHz GPR imaging of a palaeochannel crossed by the fault allowed us to estimate its lateral displacement to be about 2 m. This is consistent with a right lateral strike-slip displacement induced by an earthquake around magnitude 7 or several around magnitude 6. The 2-D 50 MHz profiles, recorded perpendicular to the fault, show a strong reflection dipping to the NE, which corresponds to the fault plane. Those profiles provided complementary information on the fault such as its location at shallow depth, its dip angle (from 23 • to 35 •) and define its lateral extension. Central Asia is known for its high level of seismic hazards, especially Mongolia, which has been one of the most seismically active intracontinental regions in the world with four large earthquakes (magnitude around 8) along its active faults in the western part of the country during the last century (Khilko et al. 1985). The deformation in Mongolia is located between compressive structures related to the collision and penetration of the Indian plate into the Eurasian plate and extensive structures in the north of the country related with the Baykal rift (Tapponnier & Molnar 1979; Baljinnyam et al. 1993; Schlupp 1996; Bayasgalan & Jackson 1999). The seismic activity observed in the vicinity of Ulaanbaatar (UB), capital of Mongolia, is relatively low compared to the activity observed in western Mongolia. Nevertheless, since 2005, the seismic activity around UB not only has increased, but is also organized (see Fig. 1) at the west of UB along two perpendicular directions, which determine two active faults: Emeelt fault, discovered in 2008 (NNW-SSE direction, 25-km-long minimum and situated about 10 km W of UB) and Hustai fault (WSW–ENE direction, 80 km long, with its NE tip at less than 20 km west of UB); their length and morphology indicate that they can produce earthquakes of magnitude 6.5–7.5 (Schlupp et al. 2012). Most of the Mongolian population (1.2 million over 3 million) is concentrated at UB, which is the main political and economical centre of the country. Hence, the study of seismic hazard and the estimation of the probability of future destructive earthquakes are of primary importance for the country (Dugarmaa et al. 2006). Since the last large earthquake, the faults geomorphology has been highly smoothed by erosional processes and the exact location of the fault plane surface rupture is thus hidden within a several metre wide strip. The GPR method has been proven to give good and useful results to characterize faults by identifying offsets of radar reflections (Malik et al. 2007; Christie et al. 2009; Yalçiner et al. 2013) and
ISSN: 0956-540X

hal-01342629
https://hal.archives-ouvertes.fr/hal-01342629
https://hal.archives-ouvertes.fr/hal-01342629/document
https://hal.archives-ouvertes.fr/hal-01342629/file/Dujardin_Bano_etal_Geoph.%20J.%20Int._2014_final.pdf
DOI : 10.1093/gji/ggu130

Éditeur(s) : HAL CCSD European Geosciences Union
Résumé : International audience
During the GWADASEIS cruise (Lesser Antilles volcanic arc, February-March 2009) a very high resolution (VHR) seismic-reflection survey was performed in order to constrain Late Quaternary to Present faulting. The profiles we obtained evidence frequent "ponding" of reworked sediments in the deepest areas, similar to the deposition of Mediterranean "homogenites". These bodies are acoustically transparent (few ms t.w.t. thick) and are often deposited on the hanging walls of dominantly normal faults, at the base of scarps. Their thickness appears sufficient to compensate (i.e. bury) co-seismic scarps between successive earthquakes, resulting in a flat and horizontal sea floor through time. In a selected area (offshore Montserrat and Nevis islands), piston coring (4 to 7 m long) was dedicated to a sedimentological analysis of the most recent of these particular layers. It corresponds to non-stratified homogenous calcareous silty sand (reworked calcareous plankton and minor volcanoclastics). This layer can be up to 2 m thick, and overlies finegrained hemipelagites. The upper centimeters of the latter represent the normal RedOx water/sediment interface. 210Pb and 137Cs activities lack in the massive sands, while a normal profile of unsupported 210Pb decrease is observed in the hemipelagite below, together with a 137Cs peak correspond- ing to the Atmospheric Nuclear Experiments (1962). The RedOx level was thus capped by a recent instantaneous major sedimentary event considered as post-1970 AD; candidate seismic events to explain this sedimentary deposits are either the 16 March 1985 earthquake or the 8 October 1974 one (Mw=6.3 and Mw=7.4, respectively). This leads to consider that the syntectonic sedimentation in this area is not continuous but results from accumulation of thick homogenites deposited after the earthquakes (as observed in the following weeks after Haiti January 2010 event, McHugh et al., 2011). The existence of such deposits suggests that, in the area of study, vertical throw likely results from cumulated effects of separated earthquakes rather than from aseismic creep. Examination of VHR profiles shows that all major co-seismic offsets are recorded in the fault growth sequence and that co-seismic offsets can be precisely estimated. By using a sedimentation rate deduced from 210Pb decrease curve (0.5 mm yr−1) and taking into account minor reworking events detected in cores, we show that the Redonda system may have been responsible for five >M6 events during the last 34 000 yr. The approach presented in this work differs from fault activity analyses using displaced sets of isochronous surfaces and postulating co-seismic offsets. Combining VHR seismic imagery and coring we can decipher co-seismic vs. slow continuous displacement, and thus actually estimate the amplitude and the time distribution of major co-seismic offsets.
ISSN: 1561-8633

insu-00844581
https://hal-insu.archives-ouvertes.fr/insu-00844581
https://hal-insu.archives-ouvertes.fr/insu-00844581/document
https://hal-insu.archives-ouvertes.fr/insu-00844581/file/nhess-12-1755-2012.pdf
DOI : 10.5194/nhess-12-1755-2012

Éditeur(s) : HAL CCSD
Résumé : Thrusting fault zone in foreland basins are characterized by highly foliated zones generally enriched in phyllosilicates which can play a major role on the mechanical behaviour of the fault. In this context, investigations of synkinematic clay minerals permit to determine the origin of the fluid from which they precipitated as well as the mechanisms of deformation. Our study is focused on clay mineral assemblages (illite and chlorite) in a major thrust fault located in the Monte Perdido massif (southern Pyrenees), a shallow thrust that affects upper cretaceous-paleocene platform carbonates and lower Eocene marls and turbidites. It implied 3 km of displacement of the Monte Perdido thrust unit with respect to the underlying Gavarnie unit. In this area the cleavage development by pressure-solution is linked to the Monte Perdido and Gavarnie thrust activity. The core zone of the fault, about 6 m thick, consists of an interval of intensely deformed clay-bearing rocks bounded by major shear surfaces. The deformed sediment is markedly darker than the protolith. Calcite-quartz shear veins along the shear planes are abundant. Detailed SEM and TEM observations of highly deformed fault zone samples indicate that clay mineral enrichment in the core zone of the fault is not only related to passive increase by pressure-solution mechanism but that dissolution-recrystallization of phyllosilicates occurs during deformation. A mineral segregation is observed in the highly deformed zone. Newly formed 2M 1 muscovite is present along the cleavage whereas IIb chlorite crystals fill SV2 shear veins suggesting syntectonic growth of phyllosilicates in the presence of fluids in low-grade metamorphic conditions. These mineralogical reactions act as weakening processes and would favour Monte Perdido fault creeping.
Swiss Journal of Geosciences

hal-00795553
https://hal.archives-ouvertes.fr/hal-00795553
DOI : 10.1007/s00015-012-0098-0

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Mongolia represents the northernmost area affected by the India–Asia collision, and it is actively deformed along transpressive belts closely associated with large-scale strike-slip faults. The active and past mantle flow beneath this region is, however, poorly known. In order to investigate deep mantle deformation beneath central Mongolia and its relation with the surrounding major structures such as the Siberian craton, the Gobi–Altay belt and the Baikal rift, a NS-trending profile of broadband seismic stations has been deployed in the summer 2003 from the southern Siberian craton to the Gobi–Altay range, crossing the entire Hangay dome. Mantle flow is deduced from the splitting of teleseismic shear waves such as SKS phases. In eastern Mongolia, the permanent station ULN in Ulaanbaatar reveals the presence of two anisotropic layers, the upper one being oriented NE–SW, close to the trend of lithospheric structures and the lower one NW–SE, close to the trend of Eurasia absolute plate motion. Along the NS profile in central Mongolia, seismic anisotropy deduced from SKS splitting reveals a homogeneous NW–SE trending structure, fully consistent with the observations made in the Altay–Sayan in western Mongolia. The observed delay times of 1.5 to more than 2.0 s favor consistent mantle flow over large mantle thicknesses. Since the lithosphere is less than 100 km thick beneath central Mongolia and since the observed fast directions are parallel to the trend of the lithospheric structures but also close to the trend of the absolute plate motion, we propose that both the lithosphere and the asthenosphere may join their anisotropic effects beneath central Mongolia to explain the large delay times. Although GPS vectors represent the instantaneous displacement of the Earth's surface and SKS splitting the time and vertical integration of finite strain at depth, we use the opportunity of the dense geodetic measurements available in this region to discuss the anisotropy pattern in term of present-day deformation. In the Eurasia-fixed reference frame, GPS and SKS both depict a similar trend beneath central Mongolia, suggesting a lithospheric block “escaping” toward the east that could orient olivine a-axes in the upper mantle, within a transpressive tectonic regime. A different behaviour is observed in western Mongolia: the GPS vectors trend NS, close to the regional compression direction, whereas the fast SKS directions trend EW, suggesting a tectonic regime close to a mode of axial shortening, generating the development of an EW-trending foliation at depth. We therefore propose that Mongolia is a place where active and frozen lithospheric deformation may add their effects, together with the sublithospheric flow. In the three sources of anisotropy inferred, a fundamental role is played by the Siberian craton that acted as an undeformable core of the continent through time: the frozen Paleozoic and Mesozoic structures wrap around the craton, building up the fast anisotropic direction pattern; the present-day sublithospheric flow induced by the plate motion is likely deflecting around its deep roots; finally, the present-day tectonic regime appears to be controlled by the presence of the craton to the north.
ISSN: 0012-821X

hal-00407853
https://hal.archives-ouvertes.fr/hal-00407853
https://hal.archives-ouvertes.fr/hal-00407853/document
https://hal.archives-ouvertes.fr/hal-00407853/file/Barruol_SKS_Mongolia_EPSL2008_hal.pdf
DOI : 10.1016/j.epsl.2008.07.027

Éditeur(s) : HAL CCSD Copernicus Publications on behalf of the European Geosciences Union
Résumé : International audience
During the GWADASEIS cruise (Lesser Antilles volcanic arc, February–March 2009) a very high resolution (VHR) seismic-reflection survey was performed in order to constrain Late Quaternary to Present faulting. The profiles we obtained evidence frequent " ponding " of reworked sediments in the deepest areas, similar to the deposition of Mediterranean " homogenites ". These bodies are acoustically transparent (few ms t.w.t. thick) and are often deposited on the hanging walls of dominantly normal faults, at the base of scarps. Their thickness appears sufficient to compensate (i.e. bury) co-seismic scarps between successive earthquakes, resulting in a flat and horizontal sea floor through time. In a selected area (offshore Montserrat and Nevis islands), piston coring (4 to 7 m long) was dedicated to a sedimento-logical analysis of the most recent of these particular layers. It corresponds to non-stratified homogenous calcareous silty sand (reworked calcareous plankton and minor volcanoclas-tics). This layer can be up to 2 m thick, and overlies fine-grained hemipelagites. The upper centimeters of the latter represent the normal RedOx water/sediment interface. 210 Pb and 137 Cs activities lack in the massive sands, while a normal profile of unsupported 210 Pb decrease is observed in the hemipelagite below, together with a 137 Cs peak corresponding to the Atmospheric Nuclear Experiments (1962). The RedOx level was thus capped by a recent instantaneous major sedimentary event considered as post-1970 AD; candidate seismic events to explain this sedimentary deposits are either the 16 March 1985 earthquake or the 8 October 1974 one (M w = 6.3 and M w = 7.4, respectively). This leads to consider that the syntectonic sedimentation in this area is not continuous but results from accumulation of thick homogen-ites deposited after the earthquakes (as observed in the following weeks after Haiti January 2010 event, McHugh et al., 2011). The existence of such deposits suggests that, in the area of study, vertical throw likely results from cu-mulated effects of separated earthquakes rather than from aseismic creep. Examination of VHR profiles shows that all major co-seismic offsets are recorded in the fault growth sequence and that co-seismic offsets can be precisely estimated. By using a sedimentation rate deduced from 210 Pb decrease curve (0.5 mm yr −1) and taking into account minor reworking events detected in cores, we show that the Redonda system may have been responsible for five > M 6 events during the last 34 000 yr. The approach presented in this work differs from fault activity analyses using displaced sets of isochronous surfaces and postulating co-seismic offsets. Combining VHR seismic imagery and coring we can decipher co-seismic vs. slow continuous displacement, and thus actually estimate the amplitude and the time distribution of major co-seismic offsets.
Natural Hazards and Earth System Science

insu-01585969
https://hal-insu.archives-ouvertes.fr/insu-01585969
https://hal-insu.archives-ouvertes.fr/insu-01585969/document
https://hal-insu.archives-ouvertes.fr/insu-01585969/file/nhess-12-1755-2012-beck.pdf
DOI : 10.5194/nhess-12-1755-2012

Éditeur(s) : HAL CCSD Société géologique de France
Résumé : New-Caledonia island consists of an ultramafic nappe thrusted over a continental and arc-derived basement as the result of the closure of a back-arc basin during the upper Eocene. The morphology of New-Caledonia is mostly characterized by its elongated shape and rectilinear coastline. Indeed, the western and eastern edges of the island are delineated by N140 trending normal faults that are well imaged on seismic lines. Major tectonic lineaments onland, including the scarps corresponding to the main boundary of the ultramafic nappe, also trend N140 suggesting a morphotectonic control by faults having similar kinematics (longitudinal flexure-fault of previous authors). We provide detailed observations from some of these scarps demonstrating indeed that these are not erosional features in origin. We explore the possibility that such surfaces do represent major tectonic limits that accommodated extension and significant tectonic thinning of both the peridotite nappe and its basement. Remnants of a complex extensional fault zone, 200 m wide, are still preserved along the western scarp of the Mont Dore mountain, close to Noumea city. The deformed zone is composed of an early shallow dipping detachment fault, some decimeters thick, offset by a group of late high angle normal faults and is bounded by cataclastic breccias that progressively pass into the fractured host peridotite. The late high angle fault zones have been the site of important syn-tectonic fluid circulation and are underlined by cm-thick silica infills bearing vertical striae. Typical morphology of the main scarps with break of slope is related to the combination of high angle normal faults and low angle detachment. Similar shallow dipping detachment surfaces have been observed along the east coast of southern New-Caledonia as well as within the ultramafic nappe itself and its basement. This study confirms that N140 oriented, large fault zones, with pure-normal to transtensional component of displacement, controlled the morphotectonic evolution of New-Caledonia at the regional scale, after the obduction of ophiolite nappe at the end of the Eocene. Such a fact has to be taken into account when attempting to reconstruct the post-obduction evolution of the island and more particularly when considering the development and distribution of the Ni-rich lateritic surfaces.
EISSN: 1777-5817

hal-00411855
https://hal.archives-ouvertes.fr/hal-00411855
DOI : 10.2113/gssgfbull.179.3.315