Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
Previous work has demonstrated that geoelectrical measurements, acquired either along the Earth’s surface or in boreholes, can be sensitive to the presence of fractures. However, a lack of numerical approaches that are well suited to modelling electric current flow in fractured media prevents us from systematically exploring the links between geoelectrical measurements and fractured rock properties. To address this issue, we present a highly computationally efficient methodology for the numerical simulation of geoelectrical data in 2.5-D in complex fractured domains. Our approach is based upon a discrete-dual-porosity formulation, whereby the fractures and rock matrix are treated separately and coupled through the exchange of electric current between them. We first validate our methodology against standard analytical and finite-element solutions. Subsequent use of the approach to simulate geoelectrical data for a variety of different fracture configurations demonstrates the sensitivity of these data to important parameters such as the fracture density, depth, and orientation.
ISSN: 0956-540X

hal-01622151
https://hal.archives-ouvertes.fr/hal-01622151
https://hal.archives-ouvertes.fr/hal-01622151/document
https://hal.archives-ouvertes.fr/hal-01622151/file/sanzGJI2017.pdf
DOI : 10.1093/gji/ggx080

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
Tilt fluctuations can potentially reflect the response of hydrosystems to important rainfall. In this context, long baseline tiltmeters have been installed in an underground tunnel penetrating the Fontaine de Vaucluse karst to study the medium deformation related to solicitations exerted by water infiltrating the hydrosystem. The instruments monitor the tilt as well as its spatial variation. Northward tilts reaching a 1 μrad amplitude are observed consecutively to rainfalls. The tilt amplitude is highly correlated with the Fontaine de Vaucluse outlet flow fluctuations. The measured tilt signal is also relatively homogeneous over a 150 m length. Different types of structure likely to produce such observations are tested in order to identify their location with respect to the tiltmeters, their dimension as well as the amount of water level variation in the structure. Following rainfalls, the infiltration of water modifies the pore pressure, inducing a medium deformation. The hypothesis of an homogeneous surface loading on the Vaucluse plateau is first refuted since the related tilt is much lower than the one measured. The water supplied by rainfalls has to accumulate in discontinuities in order to generate a higher tilt. So, the deformation related to a pressure exerted on a fracture filled by water is assessed. A first study reveals the interest of the tilt homogeneity information that constrains strongly the fracture properties. Thus, the fracture must be located at a distance more than a few hundreds metres from the tiltmeters in order to produce a tilt homogeneous in space. If the fracture is initially dry, it must also be filled on a height higher than 150 m consecutive to a rainfall in order to generate a tilt amplitude in the same magnitude as the one measured. Then, we explore the influence of water level variations on the tilt produced by a fracture located at the interface between the saturated and unsaturated zones, which are thereby permanently flooded. Since several parameters of that model satisfactorily explain the field observations, we discuss how simultaneous geodetical observations could provide complementary information that would further constrain the geometry of the structure at the origin of the medium deformation.
ISSN: 0956-540X

insu-01408482
https://hal-insu.archives-ouvertes.fr/insu-01408482
https://hal-insu.archives-ouvertes.fr/insu-01408482/document
https://hal-insu.archives-ouvertes.fr/insu-01408482/file/Lesparre-2017.pdf
DOI : 10.1093/gji/ggw446

Éditeur(s) : HAL CCSD Springer Verlag (Germany) Springer Verlag
Résumé : Production rates in horizontal shale gas wells display declines that are controlled by the low permeability and the intrinsic heterogeneity of the shale matrix. We present an original multi-continuum approach that yields a physical model able to reproduce the complexity of the decreasing gas rates. The model describes the dynamics of gas rate as function of the physical reservoir parameters and geometry, while the shale matrix heterogeneity is accounted for by a stochastic description of transmissivity field. From the 3D (Dimensional) problem setting, including the heterogeneous shale matrix, the fractures generated by the hydrofracking operations, as well as the production well characteristics, we establish an effective upscaled 1D model for the gas pressures in fracture and matrix as well as the volumetric flux. We analyse the decline curves behaviour, and we identify the time scales that characterize the dynamics of the gas rate decline using explicit analytical Laplace space solutions of the upscaled process model. Asymptotically, the flux curves decrease exponentially, while in an intermediate regime we find a power-law behaviour, in which the flux scales with a power law in time as (t^{-beta }), where (beta ) reflects the medium heterogeneity. We use this solution to fit a set of real data displaying distinctly different decline trends and study the sensitivity of the model to the reservoir parameters in order to identify their respective controls at the different stages of the decline curve dynamics. Results indicate that the initial value of the gas rate is determined by the transmissivity of the fractures and the initial pressure of the gas in the shale matrix. The latter causes mainly a shift in the entire decline curve. The early time of decline curve shape is primarily controlled by the fracture properties (compressibility and transmissivity). During the main part of the economically valuable production times, i.e. before the production rate drops exponentially, the decline curve is strongly controlled by the properties of the shale rocks including their heterogeneity, which is modelled by two parameters describing the non-Fickian pressure diffusion effects in a stochastic framework.
ISSN: 0169-3913

hal-01217247
https://hal.archives-ouvertes.fr/hal-01217247
DOI : 10.1007/s11242-015-0504-y

Éditeur(s) : HAL CCSD
Résumé : Among erosion processes, river incision is classicaly described as a key process controlling erosion of landscapes. Incision efficiency is mainly influenced by climate and erodibility. This latter is not only dependent on the nature of the bedrock, but also on its past deformation, which affects its rheological effective properties, such as fracture density. The main objectives of this thesis are: (1) to better constrain the relationship between effective properties and erodibility, and (2) to quantify the influence of erodibility and erosion on both the temporal and spatial building or decay of the topography. Several numerical tools are developed. A 1D formalism of landscape evolution is introduced, including river incision with stochastic distribution of water discharge and hillslope landsliding. A new remeshing algorithm called Surface Lagrangian Remeshing (SLR) is developed as a complement to remeshing algorithms dealing with internal elements. It allows one to take into account long-term erosion into 2D Lagrangian numerical codes based on triangular finite elements. Then the potentiality of measuring erodibility in-situ using a Schmidt hammer (R) is assessed for the active orogen of Taiwan, the diagenetic Annot sandstones and St Clement fault zone. Results suggest a strong control of R by effective properties. A linear model based on effective medium theory is applied to a fault zone with an unmacthed resolution (750 measures, 25 measures per square meter). The model successfully correlates R to fracture density. These results demonstrate that effective elasticity as well as erodibility are sensitive to the density and type of fractures. Finally I focus on the erosional and rheological conditions that allows reproducing post-orogenic evolution of mountain belts. A model coupling surface erosion and regional isostatic uplift is consistent with observations. The topographic decay and decrease of the ratio of surface elevation over crustal root thickness is at first order controlled by the initial geometry of the mountain belt and erosion efficiency. This new model highlights the control ofclimate and erodibility on the topographic decay and of lithospheric rheology on the perseverance of crustal roots.
Parmi les processus d'érosion, l'incision des rivières est classiquement décrit comme un processus clé contrôlant l'érosion des paysages. L'efficacité de l'incision est principalement influencée par le climat et par l'érodabilité. Ce dernier paramètre ne dépend pas seulement de la nature du substratum rocheux, mais aussi de sa déformation passée qui affecte ses propriétés rhéologiques équivalentes. Les principaux objectifs de cette thèse sont: (1) de mieux contraindre les relations entre propriétés équivalentes et érodabilité, et (2) de quantifier l'influence de l'érosion et de l'érodabilité sur la formation ou la décadence, spatiale et temporelle, de la topographie. Plusieurs outils numériques sont développés. Un formalisme 1D d'évolution des paysages est proposé, prenant en compte simultanément l'incision des rivières avec une distribution stochastique des débits en eau et l'érosion des versants par glissements de terrain. Un nouvel algorithme de remaillage appelé Surface Lagrangian Remeshing (SLR) est développé. Il permet de prendre en compte l'érosion à long terme dans les codes numériques 2D Lagrangiens basés sur des éléments finis triangulaires. Ensuite, la possibilité de mesurer in-situ l'érodabilité avec un marteau de Schmidt (R) est évaluée pour: l'orogène actif de Taiwan, les grès diagénétiques d'Annot et la zone de faille de St Clément. Les résultats suggèrent un fort contrôle de R par les propriétés équivalentes des roches testées. Un modèle linéaire, basé sur la théorie des milieux équivalents, est appliqué à une zone de faille avec une résolution inégalée (750 mesures, 25 mesures par mètre carré). Le modèle permet de corréler avec succès la densité de fracture et R. Ces résultats démontrent empiriquement que l'élasticité équivalente ainsi que l'érodabilité sont sensibles à la densité et à la nature des fractures. Enfin j'étudie les conditions d'érosion et de rhéologie qui permettent de reproduire l'évolution des chaînes de montagnes post-orogéniques. Un modèle couplant érosion en surface et soulèvement isostatique régional est compatible avec les observations. Les taux de décroissance topographique et de diminution du rapport de l'élévation de surface sur l'épaisseur de racine crustale sont contrôlés au premier ordre par la géométrie initiale de la chaîne de montagne et par l'efficacité de l'érosion. Ce nouveau modèle met en évidence le contrôle du climat et de l'érodabilité sur la décroissance topographique et de la rhéologie lithosphérique sur la persévérance des racines crustales.
https://tel.archives-ouvertes.fr/tel-00602341

tel-00602341
https://tel.archives-ouvertes.fr/tel-00602341
https://tel.archives-ouvertes.fr/tel-00602341/document
https://tel.archives-ouvertes.fr/tel-00602341/file/thesephilippesteer.pdf

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
Random walk (RW) or Continuous Time Random Walk (CTRW) are recurring Monte Carlo methods used to model convective and diffusive transport in complex heterogeneous media. Many applications can be found, including fluid mechanic, hydrology, and chemical reactors modeling. These methods are easy to implement, very versatile and flexible enough to become appealing for many applications because they generally overlook of deeply simplify the building of explicit complex meshes required by deterministic methods. RW and CTRW provide a good physical understanding of the interactions between the space scales of het-erogeneities and the transport phenomena under consideration. In addition, they can result in efficient up-scaling methods, especially in context of flow and transport in fractured media. In the present study, we review the applications of RW or CTRW for several situations coping with various spatial scales, and different insights into up-scaling applications. RW and CTRW advantages and downsides are also discussed, thus providing a few avenues for further works and applications.
ISSN: 0169-3913

hal-01449131
https://hal.archives-ouvertes.fr/hal-01449131
https://hal.archives-ouvertes.fr/hal-01449131/document
https://hal.archives-ouvertes.fr/hal-01449131/file/0025972-02.pdf
DOI : 10.1007/s11242-016-0693-z

Éditeur(s) : HAL CCSD
Résumé : International audience
In many geological reservoirs, open fractures or fault zones generally induce high spatial variability of hydrodynamical properties and shape the main deep-seated flow paths. It is of crucial interest to determine their structure and properties in order to achieve a sound and sustained exploitation of resources or to estimate the risk of failure of any underground storage. Tiltmeters have emerged as new tools to observe deformation generated by groundwater flow. As such instruments are highly sensitive to pressure gradients, they are perfectly suited for monitoring channelized flow in connected fractures and fault zones. Hence, they provide a unique insight of these reservoirs' geometry and dynamics over broad time scales. Here we demonstrate that continuous tilt data from surface long baseline tiltmeters (LBT) can be used alone to evaluate the general functioning of a fractured hardrock system and estimate the hydraulic properties of its main conductive features. The study is applied to the pumping site of Ploemeur observatory (Brittany, France) which is well documented and instrumented, and therefore forms a convenient setting for introducing LBT as tools for fractured media hydrology. On the short term, tilt signals are strongly correlated with pumping cycles and associated head level changes in well-connected boreholes. Besides, when pumps are stopped the maximal tilt direction is systematically perpendicular to a subvertical fault zone whose azimuth of strike has thereby been refined down to degree precision. By using a semi-analytical model of deformation, we establish the link between tilt and pressure change during pumping interruptions which then allows for hydraulic properties estimation from tilt measurements only. Finally, we validate our results with previous estimates obtained from other studies and discuss the orientation of future work that could enhance these estimates.
AGU Fall Meeting 2014
San Francisco, United States

insu-01093437
https://hal-insu.archives-ouvertes.fr/insu-01093437

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
Random walk (RW) methods are recurring Monte Carlo methods used to modelconvective and diffusive transport in complex heterogeneous media. Many applications canbe found, including fluid mechanic, hydrology and chemical reactors modeling. These methodsare easy to implement, very versatile and flexible enough to become appealing for manyapplications because they generally overlook or deeply simplify the building of explicit complexmeshes required by deterministic methods. RWprovides a good physical understandingof the interactions between the space scales of heterogeneities and the transport phenomenaunder consideration. In addition, they can result in efficient upscaling methods, especiallyin the context of flow and transport in fractured media. In the present study, we review theapplications of RW to several situations that cope with diverse spatial scales and differentinsights into upscaling problems. The advantages and downsides of RW are also discussed,thus providing a few avenues for further works and applications.
ISSN: 0169-3913

insu-01308060
https://hal-insu.archives-ouvertes.fr/insu-01308060
DOI : 10.1007/s11242-016-0693-z

Éditeur(s) : Geological Soc Amer, Inc
Résumé : Pockmarks are seafloor depressions commonly associated with fluid escape from the seabed and are believed to contribute noticeably to the transfer of methane into the ocean and ultimately into the atmosphere. They occur in many different areas and geological contexts, and vary greatly in size and shape. Nevertheless, the mechanisms of pockmark growth are still largely unclear. Still, seabed methane emissions contribute to the global carbon budget, and understanding such processes is critical to constrain future quantifications of seabed methane release at local and global scales. The giant Regab pockmark (9 degrees 42.6' E, 5 degrees 47.8' S), located at 3160 m water depth near the Congo deep-sea channel (offshore southwestern Africa), was investigated with state-of-the-art mapping devices mounted on IFREMER's (French Research Institute for Exploitation of the Sea) remotely operated vehicle (ROV) Victor 6000. ROV-borne micro-bathymetry and backscatter data of the entire structure, a high-resolution photo-mosaic covering 105,000 m(2) of the most active area, sidescan mapping of gas emissions, and maps of faunal distribution as well as of carbonate crust occurrence are combined to provide an unprecedented detailed view of a giant pockmark. All data sets suggest that the pockmark is composed of two very distinctive zones in terms of seepage intensity. We postulate that these zones are the surface expression of two fluid flow regimes in the subsurface: focused flow through a fractured medium and diffuse flow through a porous medium. We conclude that the growth of giant pockmarks is controlled by self-sealing processes and lateral spreading of rising fluids. In particular, partial redirection of fluids through fractures in the sediments can drive the pockmark growth in preferential directions.
Geology (0091-7613) (Geological Soc Amer, Inc), 2014-01 , Vol. 42 , N. 1 , P. 63-66

Droits : 2013 Geological Society of America
http://archimer.ifremer.fr/doc/00186/29731/28293.pdf
DOI:10.1130/G34801.1
http://archimer.ifremer.fr/doc/00186/29731/

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
Upper-mantle flow beneath the South Pacific is investigated by analysing shear wave splitting parameters at eight permanent long-period and broad-band seismic stations and 10 broad-band stations deployed in French Polynesia from 2001 to 2005 in the framework of the Polynesian Lithosphere and Upper Mantle Experiment (PLUME). Despite the small number of eventsand the rather poor backazimuthal coverage due to the geographical distribution of the natural seismicity, upper-mantle seismic anisotropy has been detected at all stations except at Tahiti where two permanent stations with 15 yr of data show an apparent isotropy. The median value of fast polarization azimuths (N67.5°W) is parallel to the present Pacific absolute platemotion direction in French Polynesia (APM: N67°W). This suggests that the observed SKS fast polarization directions result mainly from olivine crystal preferred orientations produced by deformation in the sublithospheric mantle due to viscous entrainment by the moving Pacific Plate and preserved in the lithosphere as the plate cools. However, analysis of individualmeasurements highlights variations of splitting parameters with event backazimuth that imply an actual upper-mantle structure more complex than a single anisotropic layer with horizontal fast axis. A forward approach shows that a two-layer structure of anisotropy beneath French Polynesia better explains the splitting observations than a single anisotropic layer. Second ordervariations in the measurements may also indicate the presence of small-scale lateral heterogeneities. The influence of plumes or fracture zones within the studied area does not appear to dominate the large-scale anisotropy pattern but may explain these second-order splitting variations across the network.
ISSN: 0956-540X

hal-01249275
https://hal.archives-ouvertes.fr/hal-01249275
https://hal.archives-ouvertes.fr/hal-01249275/document
https://hal.archives-ouvertes.fr/hal-01249275/file/GJI2007SKS.pdf
DOI : 10.1111/j.1365-246X.2007.03475.x

Éditeur(s) : HAL CCSD
Résumé : 1 p.
For groundwater issues (potential leakages in waste repository, aquifer management ...), the development of modeling techniques is far ahead of the actual knowledge of aquifers. This raises two fundamental issues: 1) which and how much data are necessary to make predictions accurate enough for aquifer management issues; 2) which models remain relevant to describe the heterogeneity and complexity of geological systems. The French observatory H+ was created in 2002 with the twofold motivation of acquiring a large database for validating models of heterogeneous aquifers, and of surveying groundwater quality evolution in the context of environmental changes. H+ is a network of 4 sites (Ploemeur, Brittany, France; HES Poitiers, France; Cadarache, France; Campos, Mallorca, Spain) with different geological, climatic, and economic contexts. All of them are characterized by a highly heterogeneous structure (fractured crystalline basement for Ploemeur, karstified and fractured limestone for Poitiers, Cadarache and Mallorca), which is far to be taken into account by basic models. Ploemeur is exploited as a tap-water plant for a medium-size coastal city (15,000 inhabitants) for 20 years. Each site is developed for long term investigation and monitoring. They involves a dense network of boreholes, detailed geological and geophysical surveys, periodic campaigns and/or permanent measurements of groundwater flow, water chemistry, geophysical signals (including ground motions), climatic parameter, etc. Several large-scale flow experiments are scheduled per year to investigate the aquifer structure with combined geophysical, hydrogeological, and geochemical instruments. All this information is recorded in a database that has been developed to improve the sustainability and quality of data, and to be used as a collaborative tool for both site researchers and modelers. This project lasts now for 5 years. It is a short time to collect the amount of information necessary to apprehend the complexity of aquifers; but it is already enough to obtain a few important scientific results about the very nature of the flow heterogeneity, the origin and residence time of water elements, the kinetic of geochemical processes, etc. We have also developed new methods to investigate aquifers (in-situ flow measurements, flow experiment designs, groundwater dating, versatile in-situ probes, etc.). This experience aiming at building up long term knowledge appears extremely useful to address critical issues related to groundwater aquifers: the structure and occurrence of productive aquifer in crystalline basement, the assessment of aquifer protection area in the context of highly heterogeneous flow, the biochemical reactivity processes, the long term evolution of both water quantity and quality in the context of significant environmental changes, for instance.
AGU, Fall Meeting 2008
San Francisco, United States

insu-00375980
https://hal-insu.archives-ouvertes.fr/insu-00375980

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
An analytical solution in the Laplace domain is derived for modeling anomalous pressure diffusion during pumping tests in aquifer displaying hierarchical fractal fracture networks. The proposed solution generalizes all of the analytical models for fractal flow published previously by combining multifractal diffusion and nested multiporosity with transient exchanges, interface skin effects, and well storage effect. Solutions are derived for fracture-delimited blocks with planar, cylindrical, and spherical shapes, as well as with any fractional dimensional shapes. Any combinations of these shapes can be defined in order to model a large range of situations. Within each permeability level, the fractal properties of the fracture network can be specified and the fractal dimension can be distinct from the shape dimension of the block.
ISSN: 0043-1397

hal-00411549
https://hal.archives-ouvertes.fr/hal-00411549
DOI : 10.1029/2008WR007125

Éditeur(s) : HAL CCSD Elsevier
Résumé : The slow advance of a crack in soda-silicate glasses was studied at nanometer scale by in-situ and real-time atomic force microscopy (AFM) in a well-controlled atmosphere. An enhanced diffusion of sodium ions in the stress-gradient field at the sub-micrometric vicinity of the crack tip was revealed through several effects: growth of nodules in AFM height images, changes in the AFM tip–sample energy dissipation. The nodules patterns revealed a dewetting phenomenon evidenced by ‘breath figures'. Complementary chemical micro-analyses were done. These experimental results were explained by a two-step process: (i) a fast migration (typical time: few milliseconds) of sodium ions towards the fracture surfaces as proposed by Langford et al. [J. Mat. Res. 6 (1991) 1358], (ii) a slow backwards diffusion of the cations as evidenced in these AFM experiments (typical time: few minutes). Measurements of the diffusion coefficient of that relaxing process were done at room temperature. Our results strengthen the theoretical concept of a near-surface structural relaxation due to the stress-gradient at the vicinity of the crack tip. The inhomogeneous migration of sodium ions might be a direct experimental evidence of the presence of sodium-rich channels in the silicate structure [A. Meyer et al., Phys. Rev. Let. 93 (2004) 027801].
ISSN: 0022-3093

hal-00407634
https://hal.archives-ouvertes.fr/hal-00407634
DOI : 10.1016/j.jnoncrysol.2006.09.034

Éditeur(s) : HAL CCSD
Résumé : Karst systems are the most important groundwater reservoirs in Mediterranean areas. Their structure and functioning are complex and not well known because of the high heterogeneity created and organised by groundwater flow. Water storage entities and water storage changes within remain difficult to assess by direct measurement and modelling. Geodetic monitoring is here used to constrain and bring original insights on karst system functioning. The Durzon karst system (Larzac plateau, Southern France) is monitored by several geodetic techniques: - Monthly absolute gravity measurements at three sites - Time-lapse surface to depth gravity measurements - Time-lapse microgravity surveying - Continuous long base hydrostatic tiltmeter monitoring at two sites Absolute gravity monitoring complemented with relative gravity surveys allows quantification of water storage changes on the studied karst system. Interannual water storage changes as detected by gravity are ~400 mm in amplitude. These storage changes are shown to occur in the epikarst and infiltration zone in certain areas. Water storage variations spatial heterogeneity is also demonstrated on the karst system. Tilt measurements monitor fast and slow infiltration processes within the karst fractured media. Karst system geodetic monitoring brings both quantitative and integrated hydrologic knowledge. Such methods could be applied to other karst aquifer studies.
Les aquifères karstiques constituent l'essentiel des ressources en eau souterraine sur le pourtour de la Méditerranée. Leur structure et leur fonctionnement sont complexes et mal connus à cause du processus de karstification qui hiérarchise la circulation hydrodynamique en leur sein. La localisation du stockage de l'eau et de ses variations au sein de tels aquifères est difficile à mesurer et à modéliser. Nous utilisons les outils de la géodésie pour apporter de nouvelles contraintes sur le fonctionnement hydrologique et les variations de stock d'eau en milieu karstique. Ainsi, le système karstique du Durzon, (Causse du Larzac, France) fait l'objet d'un suivi par plusieurs méthodes géodésiques incluant: - Des mesures de gravimétrie absolue en trois sites répétées de manière mensuelle ; - Des mesures répétées de gravimétrie relative entre la surface et la profondeur du karst ; - Des mesures répétées de microgravimétrie ; - Des mesures inclinométriques longue base en deux sites. Nous démontrons que le couplage entre la gravimétrie absolue et relative permet d'appréhender les variations de stock d'eau sur le bassin d'alimentation étudié. Les variations inter-anuelles observées sont de l'ordre de 400 mm, et nous montrons que celles-ci s'opèrent dans certaines zones au sein des horizons supérieurs du karst : épikarst et zone d'infiltration. Une forte hétérogénéité spatiale des variations de stockage est aussi mise en évidence à l'échelle du bassin d'alimentation. Les mesures inclinométriques permettent de suivre les phénomènes d'infiltration rapide et lente dans la masse karstique fracturée. Le suivi géodésique de ce système karstique permet d'apprécier quantitativement et de façon intégrée son fonctionnement hydrologique et pourra être transposé pour l'étude d'autres aquifère karstiques.
https://tel.archives-ouvertes.fr/tel-00404851

tel-00404851
https://tel.archives-ouvertes.fr/tel-00404851
https://tel.archives-ouvertes.fr/tel-00404851/document
https://tel.archives-ouvertes.fr/tel-00404851/file/THESE_jacob.pdf

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Microstructures, U-Pb SHRIMP zircon ages and temperature estimates were used to constrain the fabric evolution and timing of mylonitisation in the Patos shear zone (NE Brazil). Melt-bearing HT-mylonitic orthogneiss displays solid-state fabrics with coarse quartz ribbons and sutured grain boundaries. K-feldspar is often fractured and shows peripheral myrmekite. The textures typically become magmatic at the contacts with the Espinho Branco anatexite. Zircon crystals from two samples of the leucosome show Paleoproterozoic (ca. 2.2 Ga) inherited cores that are enveloped by recrystallised Neoproterozoic rims. These zircon grains define a discordia with lower intercept ages of 558 and 562 Ma but with large analytical errors. A leucogranite with transitional contacts with host diatexites provides a well-constrained zircon mean age of 566 ± 6 Ma (n = 15, 95% conf.), which is considered the best estimate for the peak metamorphic conditions. The transition from HT-mylonites to fine-grained mylonites and ultramylonites is marked by a progressive grain size reduction assisted by recrystallisation. Quartz crystallographic fabrics display [0 0 0 1] concentrations between Z and Y. K-feldspar and plagioclase fabrics record the activity of the (0 1 0)[0 0 1] and (0 1 0)[1 0 0] slip systems and, in the lower-temperature tectonites, the (1 0 0)[0 1 0] slip system. These results suggest a diachronic evolution in which an initial HT northern domain was deformed by intracrystalline slip and melt-assisted granular flow, followed by medium- to low-temperature solid-state creep in the southern shear zone domain. The mylonites therefore record the rheological heterogeneities responsible for the formation of a late continental shear zone that nucleated under partially molten conditions and was later reactivated through melt-absent strain localization following exhumation.
ISSN: 0301-9268

hal-01053497
https://hal.archives-ouvertes.fr/hal-01053497
DOI : 10.1016/j.precamres.2013.12.020