Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
The nucleation, propagation, and associated folding of ramp-flat-ramp normal faults were analyzed from field examples developed in a brittle/ductile multilayer sequence of the Huércal-Overa Basin (SE Spain). Gently dipping sandy silt layers, which display a low cohesive strength (C0 = 7 kPa, μ = 34°), favor the development of extensional detachments. A tectonic origin instead of a possible gravitational origin is supported by the perpendicularity between the paleoslope direction of the fluvial-deltaic environment inferred from imbricated pebbles, and the senses of movement deduced from fault slicken-lines. The link between high-angle normal faults (HANFs) --formed at different levels in the layered sequence-- with horizontal fault segments comes to develop ramp-flat-ramp normal faults with associated roll-over in the hanging wall. Observed extensional duplexes are formed by parallel detachments connected through synthetic Riedel faults. These Riedel faults would produce the back-rotation of the individual blocks (horses), i.e., extensional folding of the originally subhorizontal layers. There is no correlation between the analyzed ramp-flat-ramp normal faults, accommodating south-southeastward extension during Serravallian-lower Tortonian, and either the regional Alpujarride/Nevado-Filabride west-directed extensional shear zone or the top-to-the-north detachments within Alpujarride units, which are clearly sealed by Serravallian-lower Tortonian sediments. Therefore, the studied normal faults are restricted to the brittle/ductile multilayer fluvio/deltaic sequence and accommodate moderate late extension instead of belonging to a large crustal extensional system connected with a regional detachment at depth. Therefore, the basin formed in a moderate crustal thickness context where small and medium-scale extensional systems were subordinate structures. These natural examples support the development of low-angle normal faults at very shallow crustal levels in multilayer sequences with suitable rheological conditions.
ISSN: 0278-7407

hal-00750352
https://hal.archives-ouvertes.fr/hal-00750352
DOI : 10.1029/2012TC003130

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Superposed to ductile syn-metamorphic deformations, post-foliation deformations affect metamorphic units during their exhumation. Understanding the role of such deformations in the structuration of metamorphic units is key for understanding the tectonic evolution of convergence zones. We characterize post-foliations deformations using 3D modelling which is a first-order tool to describe complex geological structures, but a challenging task where based only on surface data. We propose a modelling procedure that combines fast draft models (interpolation of orientation data), with more complex ones where the structural context is better understood (implicit modelling), allowing us to build a 3D geometrical model of Syros Island blueschists (Cyclades), based on field data. With our approach, the 3D model is able to capture the complex present-day geometry of the island, mainly controlled by the su-perposition of three types of post-metamorphic deformations affecting the original metamorphic pile: i) a top-to-South ramp-flat extensional system that dominates the overall island structure, ii) large-scale folding of the metamorphic units associated with ramp-flat extensional system, and iii) steeply-dipping normal faults trending dominantly NNW-SSE and EW. The 3D surfaces produced by this method match outcrop data, are geologically consistent, and provide reasonable estimates of geological structures in poorly constrained areas.
ISSN: 0191-8141

insu-01188400
https://hal-insu.archives-ouvertes.fr/insu-01188400
DOI : 10.1016/j.jsg.2015.07.002

Éditeur(s) : HAL CCSD Blackwell Publishing
Résumé : International audience
Pliocene and Pleistocene deposits from Grande-Terre (Guadeloupe archipelago, French Lesser Antilles) provide a remarkable example of an isolated carbonate system built in an active margin setting, with sedimentation both controlled by rapid sea-level changes and tectonic movements. Based on new field, sedimentological and palaeontological analyses, these deposits have been organized into four sedimentary sequences (S1 to S4) separated by three subaerial erosion surfaces (SB0, SB1 and SB2). Sequences S1 and S2 ('Calcaires inférieurs à rhodolithes') deposited during the late Zanclean to early Gelasian (planktonic foraminiferal Zones PL2 to PL5) in low subsidence conditions, on a distally steepened ramp dipping eastward. Red algal-rich deposits, which dominate the western part of Grande-Terre, change to planktonic foraminifer-rich deposits eastward. Vertical movements of tens of metres were responsible for the formation of SB0 and SB1. Sequence S3 ('Formation volcano-sédimentaire', 'Calcaires supérieurs à rhodolithes' and 'Calcaires à Agaricia') was deposited during the late Piacenzian to early Calabrian (Zones PL5 to PT1a) on a distally steepened, red algal-dominated ramp that changes upward into a homoclinal, coral-dominated ramp. Deposition of Sequence S3 occurred during a eustatic cycle in quiet tectonic conditions. Its uppermost boundary, the major erosion surface SB2, is related to the Cala1 eustatic sea-level fall. Finally, Sequence S4 ('Calcaires à Acropora') probably formed during the Calabrian, developing as a coral-dominated platform during a eustatic cycle in quiet tectonic conditions. The final emergence of the island could then have occurred in late Calabrian times.
ISSN: 1469-3496

hal-00760906
https://hal.archives-ouvertes.fr/hal-00760906
DOI : 10.1111/j.1365-3091.2011.01311.x

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The marine Messinian deposits of Tunisia cover a narrow littoral strip some 300 km long between the northern Bizerte and Cap Bon areas and the central-eastern Sahel region. Litho- and biofacies analysis of six stratigraphic sections reveals the distinctive features of these deposits.;The lower Messinian deposits are characterized by ubiquitous siliciclastics and abundant oolitic/bioclastic limestones organized in an eastward facing ramp. Westward (landward), this ramp changes into coastal lagoons, sometimes containing evaporites. Eastward, the ramp passes to the reefal Pelagian Platform extending as far as Lampedusa.;Two main sedimentary cycles are distinguished: 1) an early Messinian siliciclastic retrogradational then oolitic/bioclastic progradational cycle (Beni Khiar Formation and lower Oued bel Khedim Formation): 2) a late Messinian brackish to continental cycle that probably accumulated in rapidly subsiding lagoons (Cued el Bir Formation and upper Oued bel Khedim Formation). The Tunisian early Messinian cycle is partly eustatically controlled, but the late Messinian cycle cannot be confidently correlated to other well-known Messinian series because of tectonic movements.;The lower Messinian deposits of Tunisia are also characterized by abundant suspension-feeding organisms (molluscs and bryozoans) and rare corals, calcareous algae, echinoids, and larger benthic foraminifers. The proposed palaeoenvironmental model shows that the lower Messinian ramp of Tunisia was located on a current-protected margin and subjected to continent-derived sediment and nutrient supply. Eastward, nutrient influx diminished and a shallow-water isolated carbonate platform with coralgal facies developed between the western and the eastern Mediterranean basins. The main hydrological connection between these two basins occurred through a narrow seaway situated to the northeast of the Pelagian Platform, south of Sicily and Malta.
ISSN: 0031-0182

hal-00475583
https://hal.archives-ouvertes.fr/hal-00475583
DOI : 10.1016/j.palaeo.2009.10.028

Éditeur(s) : HAL CCSD Blackwell Publishing
Résumé : International audience
The study of eight stratigraphic sections at the margin of the semi-enclosed Zsambek Basin (Hungary) allows the sedimentary anatomy of oolitic-bioclastic systems in the Sarmatian of the Central Paratethys to be reconstructed. The mollusc, foraminiferal and ostracod associations indicate that the carbonate systems are Latest Badenian to Late Sarmatian in age. The Lower-Upper Sarmatian deposits are organized in superimposed subaqueous dunes prograding towards the basin on a low-angle ramp. During the Late Sarmatian, the ramp underwent subaerial erosion linked to a moderate relative fall in sea-level. Lagoonal deposits were later formed and microbial-nubeculariid-bryozoan-serpulid buildups were emplaced. The 'abnormal' marine conditions of the Sarmatian, conducive to the development of a poorly diversified flora and fauna and dominant non-skeletal grains, are linked to fluctuating salinities, mesotrophic to eutrophic conditions and perhaps high alkalinity.
ISSN: 1469-3496

hal-00429337
https://hal.archives-ouvertes.fr/hal-00429337
DOI : 10.1111/j.1365-3091.2009.01055.x

Éditeur(s) : Elsevier Science Bv
Résumé : The Danube River Basin–Black Sea area represents a unique natural laboratory for studying the interplay between lithosphere and surface as well as source to sink relationships and their impact on global change. This paper addresses some information on the “active sink” of the system; i.e. the Danube deep sea fan and the Black Sea basin. The present study focuses on the distal sedimentary processes and the evolution of sedimentation since the Last Glacial Maximum. This is investigated through recently acquired long piston coring and shallow seismic data recovered at the boundary of influence of the distal part of the Danube turbidite system (to the north-west) and the Turkish margin (to the south). This dataset provides a good record of the recent changes in the sedimentary supply and climato-eustasy in the Black Sea region during the last 25 ka. This study demonstrates that the deep basin deposits bear the record of the Late Quaternary paleoenvironmental changes and that the western Black Sea constitutes an asymmetric subsident basin bordered by a northern passive margin with confined, mid-size, mud-rich turbidite systems mainly controlled by sea-level, and a southern turbidite ramp margin, tectonically active. Highlights ► Oceanographic results from survey carried out in the western Black Sea are presented. ► The Danube fan distal part: the Black Sea main depositional feature is described. ► This study is on the morphology and gravity sedimentation in the Black Sea deep basin. ► Data were collected at the boundary between the Danube fan and the Turkish margin. ► The dataset provide a good record of sedimentary supply and climato-eustatic changes.
Global And Planetary Change (0921-8181) (Elsevier Science Bv), 2013-04 , Vol. 103 , P. 232-247

Droits : 2012 Elsevier B.V. All rights reserved.
http://archimer.ifremer.fr/doc/00095/20637/18272.pdf
DOI:10.1016/j.gloplacha.2012.05.002
http://archimer.ifremer.fr/doc/00095/20637/

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
In the framework of the Africa-Europe convergence, the Mediterranean system presents a complex interaction between subduction rollback and upper-plate deformation during the Tertiary. The western end of the system shows a narrow arcuate geometry across the Gibraltar arc, the Betic-Rif belt, in which the relationship between slab dynamics and surface tectonics is not well understood. The present study focuses on the Western Betics, which is characterized by two major thrusts: 1/ the Internal/External Zone Boundary limits the metamorphic domain (Alboran Domain) from the fold-and-thrust belts in the External Zone; 2/ the Ronda Peridotites Thrust allows the juxtaposition of a strongly attenuated lithosphere section with large bodies of sub-continental mantle rocks on top of upper crustal rocks. New structural data show that two major E-W strike-slip corridors played a major role in the deformation pattern of the Alboran Domain, in which E-W dextral strike-slip faults, N60 thrusts and N140 normal faults developed simultaneously during dextral strike-slip simple shear. Olistostromic sediments of Lower Miocene age were deposited and deformed in this tectonic context and hence provide an age estimate for the inferred continuous westward translation of the Alboran Domain that is accommodated by an E-W lateral (strike-slip) ramp and a N60 frontal thrust. The crustal emplacement of large bodies of sub-continental mantle may occur at the onset of this westward thrusting in the Western Alboran domain. At lithosphere-scale, we interpret the observed deformation pattern as the subduction upper-plate expression of a lateral slab tear and its westward propagation since Lower Miocene.
ISSN: 0040-1951

insu-01163695
https://hal-insu.archives-ouvertes.fr/insu-01163695
https://hal-insu.archives-ouvertes.fr/insu-01163695/document
https://hal-insu.archives-ouvertes.fr/insu-01163695/file/Frasca-2015.pdf
DOI : 10.1016/j.tecto.2015.05.017

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Mediterranean geodynamic system is an exceptional natural laboratory to study the complexities of back-arc extension during subduction rollback. Corsica is a key locality that recorded the Alpine subduction-collision history followed by 30 Ma of the Apennines slab rollback, responsible for the successive opening, from West to East, of the Liguro-Provençal basin and the Tyrrhenian Sea. The overall strain pattern of the Alpine metamorphic units of Alpine Corsica is studied through a synthesis of i) available geological maps, ii) geochronological data and iii) newly acquired structural data relative to successive events of ductile and brittle extension, Three main stages of extension are recorded: 1/ Syn-metamorphic Oligocene extension accommodated by N140° trending ductile shear zones, that correspond to the reactivation of a major Alpine thrust; 2/ Burdigalian ramp-flat extension with N60°-70° trending fault zones that controlled the deposition of onshore piggy-back basins (e.g. St Florent basin), and 3/ Serravalian N-S trending fault zones. From a geodynamical point of view, these successive extensional deformations in Alpine Corsica can be correlated to the history of the Apennines slab rollback. The two first stages are related to a southeastward rollback of the Appennines slab that successively triggered: 1/ Continental rifting in Oligocene leading to the opening of the Liguro-Provençal basin and 2/ Burdigalian extension with N60°-70° trending fault zone, oblique to the Alpine thrust that, after a counterclockwise rotation of the Corso-Sardinian block, became unable to accommodate extension. Finally, the third stage that gave NS-trending fault zones developed in Serravalian, at the onset of Tyrrhenian rifting, related to an eastward rollback of the Apennines slab, as a response of slab tearing in Sicily.
ISSN: 0040-1951

insu-01424859
https://hal-insu.archives-ouvertes.fr/insu-01424859
https://hal-insu.archives-ouvertes.fr/insu-01424859/document
https://hal-insu.archives-ouvertes.fr/insu-01424859/file/gueydan-tectonoph-2017.pdf
DOI : 10.1016/j.tecto.2016.12.028

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
We analyze the kinematics of fault tip folding at the front of a fold-and-thrust wedge using a sandbox experiment. The analog model consists of sand layers intercalated with low-friction glass bead layers, deposited in a glass-sided experimental device and with a total thickness h = 4.8 cm. A computerized mobile backstop induces progressive horizontal shortening of the sand layers and therefore thrust fault propagation. Active deformation at the tip of the forward propagating basal décollement is monitored along the cross section with a high-resolution CCD camera, and the displacement field between pairs of images is measured from the optical flow technique. In the early stage, when cumulative shortening is less than about h/10, slip along the décollement tapers gradually to zero and the displacement gradient is absorbed by distributed deformation of the overlying medium. In this stage of detachment tip folding, horizontal displacements decrease linearly with distance toward the foreland. Vertical displacements reflect a nearly symmetrical mode of folding, with displacements varying linearly between relatively well defined axial surfaces. When the cumulative slip on the décollement exceeds about h/10, deformation tends to localize on a few discrete shear bands at the front of the system, until shortening exceeds h/8 and deformation gets fully localized on a single emergent frontal ramp. The fault geometry subsequently evolves to a sigmoid shape and the hanging wall deforms by simple shear as it overthrusts the flat ramp system. As long as strain localization is not fully established, the sand layers experience a combination of thickening and horizontal shortening, which induces gradual limb rotation. The observed kinematics can be reduced to simple analytical expressions that can be used to restore fault tip folds, relate finite deformation to incremental folding, and derive shortening rates from deformed geomorphic markers or growth strata.
ISSN: 2169-9313

hal-00138061
https://hal.archives-ouvertes.fr/hal-00138061
https://hal.archives-ouvertes.fr/hal-00138061/document
https://hal.archives-ouvertes.fr/hal-00138061/file/Bernard_et_al-2007-Journalsur Geophysical_Research__Solid_Earth_%281978-2012%29.pdf
DOI : 10.1029/2005JB004149

Éditeur(s) : HAL CCSD
Résumé : International audience
In the frame of the Africa-Europe convergence, the Mediterranean tectonic system presents a complex interaction between subduction rollback and upper-plate deformation during the Tertiary. The western Mediterranean is characterized by the exhumation of the largest subcontinental mantle massif worldwide (the Ronda Peridotite) and a narrow arcuate geometryacross the Gibraltar arc within the Betic-Rif belt (the internal part being called the Alboran domain), where the relationship between slab dynamics and surface tectonics is not well understood. New structural and geochronological data are used to argue for 1/ hyperstrechting of the continental lithosphere allowing extensional mantle exhumation to shallow depths, followed by 2/ lower miocene thrusting. Two Lower Miocene E-W-trending strike-slip corridors played a major role in the deformation pattern of the Alboran Domain, in which E-W dextral strike-slip faults, N60°-trending thrusts and N140°-trending normal faults developed simultaneously during dextral strike-slip simple shear. The inferred continuous westward translation of the Alboran Domain is accommodated by a major E-W-trending lateral ramp (strike-slip) and a N60°-trending frontal thrust. At lithosphere-scale, we interpret the observed deformation pattern as the upper-plate expression of a lateral slab tear and of its westward propagation since Lower Miocene. The crustal emplacement of the Ronda Peridotites occurred at the onset of this westward motion.The Miocene tectonics of the western Alboran is therefore marked by the inversion of a continental rift, triggered by shortening of the upper continental plate and accommodated by E-W dextral strike-slip corridors. During thrusting and westward displacement of the Alboran domain with respect to Iberia, the hot upper plate, which involved the previously exhumed sub-continental mantle, underwent fast cooling.
AGU Fall Meeting 2015
San Francisco, United States

insu-01242043
https://hal-insu.archives-ouvertes.fr/insu-01242043