Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
A detailed rock-magnetic and archeointensity study was carried out on materials baked by a western Mexican artisan following traditional techniques to produce faithful reproductions of archeological pieces of the Michoacan region (Western Mesoamerica). The field strength at the site (41.0 +/- 0.51 mu T) was measured with a fluxgate magnetometer and the temperature of the furnace during the baking process was monitored continually by means of a thermocouple placed in the middle of the baking cavity.;Rock-magnetic experiments performed on the raw material (clay and paste) and on in situ prepared baked ceramics and bricks included measurement of thermomagnetic curves (susceptibility and strong-field magnetization versus temperature), first-order reversal curves (FORC), anisotropy of magnetic susceptibility (AMS) and anisotropy of thermoremanent magnetization (A-TRM). Magnetite and probably hematite are present in the samples as carriers of the remanence. Hysteresis ratios suggest that the samples fall in the pseudo-single-domain grain size region, which may indicate a mixture of multidomain and a significant amount of single-domain grains.;Ceramic pieces and brick fragments were subjected to the Thellier-Coe archeointensity method and to an alternative paleointensity experiment, with a TRIAXE magnetometer, in order to check whether they are faithful recorders of the local geomagnetic field strength.;Mean raw-intensity of sample M1 (pottery) overestimates a 7% the expected site intensity, while those corresponding to the brick samples (LQ1 and LQ2) underestimate it 15%. Brick sample LNQ shows a slightly lower intensity (7%), but agrees with the expected site intensity within the experimental uncertainty. The intensity retrieved from the volcanic fragment also included closely reproduces the expected intensity. After A-TRM and cooling-rate corrections, all mean raw values move closer to the expected intensity.;Measurement of temperatures at different parts inside the kiln (bottom and upper parts of both central and peripheral parts) revealed the existence of significant thermal gradients, similar to those observed in ovens from other localities. Different cooling rates are then expected in a single oven.;The scatter in the intensity determinations observed in this study, retrieved from pieces elaborated together in the same oven, could arise from this differentiated cooling rate within the oven and thus, to an inappropriate cooling rate correction in the archeointensity protocol. As this situation was probably reproduced in the baking of ancient ceramic artifacts, a better knowledge of the temperature distribution inside these types of kiln would be desirable in order to choose the appropriate cooling rate correction.
ISSN: 0031-9201

hal-00644559
https://hal.archives-ouvertes.fr/hal-00644559
DOI : 10.1016/j.pepi.2011.06.007

Résumé : The slides were taken on collecting trips sponsored by the William L. Bryant Foundation, where books, music and art indigenous to the regions were gathered. The are organized by geographical location.
Two outdoor stone ovens made with concrete and rocks in a yard in Rock Sound, Eleuthera, Bahamas. Each oven has a rectangular opening. A palm tree grows nearby. A free standing wooden structure can be seen near one of the houses. Slide labeled Rock Sound '48.
Bahamas -- North America -- Rock Sound, Eleuthera

Droits : All rights to images are held by the respective holding institution. This image is posted publicly for non-profit educational uses, excluding printed publication. For permission to reproduce images and/or for copyright information contact Special Collections & University Archives, University of Central Florida Libraries, Orlando, FL 32816 phone (407) 823-2576, email: speccoll@mail.ucf.edu
CFM1972_01a
Sheet 4:6
http://ufdc.ufl.edu/AA00028404/00001

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We present new, full geomagnetic field vector results from three Neolithic ovens discovered at the archaeological site of Portonovo (Marche, Italy). The discovered structures are a rare example of very well preserved underground ovens from the Early Neolithic period. Standard thermal demagnetization procedures were used to isolate the direction of the Characteristic Remanent Magnetization acquired by the baked clay during the ovens' last firing. The corresponding archaeointensities were determined by the multi-specimen procedure (MSP-DSC) and show a clear intensity low during the Neolithic period. Both directional and intensity results are of high quality, offering the first contribution of full geomagnetic field vector data for this period in Italy. The new data are compared with other contemporaneous data from Europe and with global geomagnetic field models. Independent archaeomagnetic dating of the three ovens was also performed by means of the SCHA.DIF.14k model. The obtained results are in excellent agreement with available radiocarbon dates and confirm that all ovens belong to the Neolithic. These new data importantly enrich our knowledge of the geomagnetic field during the Neolithic period that is poorly documented by data, not only in Italy but also in the whole of Europe and show that archaeomagnetic dating can provide precise results even for prehistoric periods.
ISSN: 0012-821X

hal-01357276
https://hal.archives-ouvertes.fr/hal-01357276
DOI : 10.1016/j.epsl.2016.05.003

Éditeur(s) : HAL CCSD
Résumé : The Earth's magnetic field shows a large range of temporal variations from the year to several million years. I studied during my PhD thesis several aspects of these fluctuations, from recent secular variations to reversals. The first part of my manuscript deals with archeomagnetism, a discipline that allows to track the temporal variations of the Earth's magnetic field through millennia, mainly from archeological materials. I studied two sets of samples , one from Greece (Neolithic period 6800-3200 B.C.) and the other from Mexico (Palenque, Maya Classic period 320-840 A.D.), to acquire new archeointensity data in order to better constrain the secular variation of the geomagnetic field. By comparing my data with those available in the literature and with the various global and regional models, I showed that the secular variations during the Neolithic in Greece and during the first millennium in Central America are poorly defined. My data suggest that local components, not described by global models, may exist in these regions. They reinforce the importance of developing specific regional models. As a consequence, the acquisition of new high quality data is of main importance. The second part presents the description of a geomagnetic field reversal. This work was based on two points : first by studying transitional directions to provide new constraints on the possible preferred longitudinal paths of virtual geomagnetic poles (VGPs) and second by checking transitional paleointensities obtained on a volcanic sequence in Akaroa volcano (New Zealand). Indeed the transitional field intensity is significantly higher than the field intensity before and after the reversal. We re-sampled this sequence, and the directional results show a complex sequence of N-T-R-T-N-T-R polarity. The transitional VGPs obtained are clustered in two longitudinal bands through Australia and America. This observation seems to reinforce the assumption of a core-mantle interaction over several million years. Following a rock magnetic study, I selected samples that could provide a value for the Thellier and multispecimen paleointensity methods. The obtained paleointensity are relatively low (about 20 μT) during the polarity change and strong at the end of the sequence. Based both on the field strength values and on the radiochronological ages, showing that the sequence was erupted in a very short time, I suggest that only the C4AR.1n-C4Ar.1r reversal was recorded in this sequence. In this assumption, the reversal shows a complex path comparable to other reversals recorded in the northern hemisphere (for example the Steens Mountain ), including a rebound before stabilizing. Finally the last part is devoted to the development of a new methodology and a new apparatus to determine absolute paleointensity. Following the low success rate of paleointensity experiments from the previous study, I decided to test the multispecimen protocol, which can be applied to samples yielding a predominant multidomaine behavior. The main technical drawback of this method lies in the application of the laboratory field along the natural remanent magnetization, a difficult task to perform accurately in standard paleointensity ovens. Thus, we decided to adapt sample holders from our standard oven in order to allow the sample orientation in space and to develop an ultra-fast heating oven prototype particularly well-suited for this method, allowing to apply the laboratory field in the 3 dimensions. I checked the different multispecimen protocols on historical lavas from Reunion and Etna volcano, yielding very different magnetic mineralogies. For all flows, I obtained paleointensities very close from the expected values, regardless from the magnetic mineralogy, revealing the feasibility of our apparatus and the promising interest of the method. The application of various corrections on the statistical estimation of the intensity value or on the cooling rate had no significant impact on my results.
La première partie de ma thèse porte sur l'archéomagnétisme, discipline qui permet de retracer l'évolution temporelle du champ magnétique terrestre au travers des derniers millénaires, principalement à partir des matériaux archéologiques. J'ai étudié deux jeux d'échantillons provenant pour l'un de la Grèce (période néolithique, 6800-3200 avant J.C.) et pour l'autre du Mexique (Palenque, période Maya Classique 320-840 après J.C.), dans le but d'acquérir de nouvelles données d'archéointensité et de mieux contraindre la variation séculaire du champ magnétique terrestre. La comparaison de mes données avec celles disponibles dans la bibliographie et avec les différents modèles globaux et régionaux a mis en évidence que les variations séculaires au Néolithique en Grèce et au cours du premier millénaire en Amérique Centrale sont très mal définies. Mes données suggèrent que des composantes locales, non prisent en compte dans les modèles globaux peuvent exister au niveau de ces régions. Elles renforcent l'intérêt de développer des modèles régionaux précis. Pour ce faire, l'acquisition de nouvelles données de haute qualitéest un élément majeur. La deuxième partie traite de la description d'un renversement du champ magnétique terrestre. Cette étude a été basée sur deux points précis : étudier les directions transitionnelles afin d'apporter de nouvelles contraintes sur le possible confinement longitudinal des pôles géomagnétiques virtuels (PGV) d'une part, et d'autre part vérifier des paléointensités transitionnelles obtenues sur la séquence volcanique d'Akaroa (Nouvelle Zélande), dont l'intensité est significativement supérieure à celles des intensités avant et après le renversement. Nous avons ré-échantillonné cette séquence, et l'évolution directionnelle obtenue pour ce renversement est une succession complexe de polarités N-T-R-T-N-T-R. Les PGV obtenus semblent se regrouper sous deux bandes longitudinales sous l'Australie et l'Amérique, ce qui renforce l'hypothèse d'une interaction entre le manteau et le noyau sur plusieurs millions d'années. Suite à une étude de minéralogie magnétique, j'ai sélectionné les échantillons susceptibles de fournir une valeur de paléointensité par les méthodes de Thellier et du multispecimen. Les paléointensités obtenues sont relativement faibles (environ 20 μT) au cours du changement de polarité et forte à la fin de la séquence. Mon interprétation, basée à la fois sur les valeurs de l'intensité du champ et sur les données radiochronologiques montrant que la séquence s'est mise en place très rapidement, est de considérer que seul le renversement C4Ar.1n-C4Ar.1r a été enregistré dans cette séquence. Dans cette hypothèse, le renversement montre un cheminement complexe comparable à d'autres renversements enregistrés dans l'hémisphère nord (comme celui de la Steens Mountain par exemple), incluant un phénomène de rebond avant de se stabiliser. La troisième partie de ma thèse est consacrée au développement d'une nouvelle méthodologie et d'un nouvel appareillage pour déterminer des paléointensités. Le faible taux de réussite des expériences de paléointensité de l'étude précédente m'a poussé à m'intéresser au protocole multispecimen, qui peut s'appliquer aux échantillons possédant un comportement polydomaine. L'inconvénient technique majeur de cette méthode réside dans l'application du champ le long de l'aimantation naturelle, difficile à réaliser avec précision dans les fours standards. Pour ce faire, nous avons décidé de développer des porte-échantillons permettant d'orienter les échantillons dans l'espace pour le four standard et un prototype de four à chauffage ultra-rapide particulièrement bien adapté avec la possibilité d'orienter le champ appliqué dans les 3 dimensions. J'ai testé les différents protocoles de la méthode sur des laves historiques de la Réunion et de l'Etna, possédant des minéralogies très différentes. Pour l'ensemble des coulées étudiées, j'ai obtenu des paléointensités très proches des valeurs attendues, et ce indépendamment de la minéralogie, révélant ainsi le faisabilité de notre appareillage et le côté prometteur de la méthode. L'application de diverses corrections sur la statistique d'estimation de la valeur de l'intensité ou sur le taux de refroidissement n'ont eu aucun impact notable sur mes résultats.
https://tel.archives-ouvertes.fr/tel-00719380

tel-00719380
https://tel.archives-ouvertes.fr/tel-00719380
https://tel.archives-ouvertes.fr/tel-00719380/document
https://tel.archives-ouvertes.fr/tel-00719380/file/thesefanjat2012.pdf

Éditeur(s) : HAL CCSD Springer Verlag/EDP Sciences
Résumé : International audience
Context and aim : This study aimed to examine the effect of the tension wood G‐layer on the viscoelastic properties of wood. Methods : Tension wood and opposite wood samples were obtained from six French Guianese tropical rainforest species (Sextonia rubra, Ocotea guyanensis, Inga alba, Tachigali melinoni, Iyranthera sagotiana and Virola michelii); the tension wood of the former three of these species had a Glayer, whilst the tension wood from the latter three had no Glayer. Tensile dynamic mechanical analysis (DMA) was performed on green never dried wood samples in the longitudinal direction with samples submerged in a water bath at a temperature (30°C) and frequency (1 Hz) representative of the conditions experienced by wood within a living tree. Then, DMA was repeated with samples conditioned to an air-dried state. Finally, samples were oven-dried to measure longitudinal shrinkage. Results : Tension wood did not always have a higher longitudinal storage (elastic) modulus than opposite wood from the same tree regardless of the presence or absence of a G‐layer. For the species containing a G‐layer, tension wood had a higher damping coefficient and experienced a greater longitudinal shrinkage upon drying than opposite wood from the same species. No difference was found in damping coefficients between tension wood and opposite wood for the species that had no G‐layer. Conclusion : It is proposed that the different molecular composition of the G-layer matrix has an influence on the viscoelasticity of wood, even if a biomechanical gain is not yet clear. This study shows that rheological properties and longitudinal shrinkage can be used to detect the presence of a G‐layer in tension wood.
ISSN: 1286-4560

hal-00677460
https://hal.archives-ouvertes.fr/hal-00677460
https://hal.archives-ouvertes.fr/hal-00677460/document
https://hal.archives-ouvertes.fr/hal-00677460/file/Clair2.pdf
DOI : 10.1007/s13595-011-0164-1

Éditeur(s) : HAL CCSD De Gruyter
Résumé : International audience
Wallaba (Eperua falcata) is a tropical wood which is known to have naturally low swelling characteristics. Samples of wallaba heartwood were subjected to differential solvent extraction. Wood pieces that were extracted with methanol experienced significantly higher swelling after rehydration from oven dry to 96% relative humidity in comparison to non-extracted samples and samples extracted with other solvents. Methanol soluble wallaba heartwood extract was purified by high pressure liquid chromatography and the compounds present were characterised by nuclear magnetic resonance spectroscopy. Methanol extract was found to contain a very high relative proportion of polar compounds which are proposed to bind to the polymeric cell wall by multiple hydrogen bonds restricting the association of water and therefore acting as natural anti-swelling agents.
ISSN: 0018-3830

hal-00856942
https://hal.archives-ouvertes.fr/hal-00856942
https://hal.archives-ouvertes.fr/hal-00856942/document
https://hal.archives-ouvertes.fr/hal-00856942/file/Chemical_extractives_tropical_wood_Royer_al.pdf

Éditeur(s) : HAL CCSD Springer Verlag (Germany)
Résumé : We present a detailed rock-magnetic and archaeomagnetic study of two brick kilns, named OSA and OSB, discovered at the location of Osterietta, in northern Italy. The magnetic properties of representative samples have been investigated to identify the nature of the magnetic carriers, their domain state and thermal stability, and investigate their suitability for archaeomagnetic determinations. Thermally stable, mainly pseudosingle domain (PSD) magnetite is identified as the main magnetic carrier. The full geomagnetic field vector has been determined for the two kilns, including directional and intensity analysis. Archaeointensities have been recovered with both the classical Thellier and the multi-specimen protocols. The multi-specimen procedure was performed with a very fast-heating oven developed at Montpellier, France. A Matlab® code for anisotropy correction during the Thellier experiment is provided. The archaeointensity results obtained from both techniques for the OSA kiln are of high quality and in good mutual agreement. For the OSB kiln, Thellier results are characterized by large standard deviation and the multi-specimen (MSP) technique was not successful. The obtained full geomagnetic field vector (declination, inclination and intensity) has been used for the archaeomagnetic dating of the two structures suggesting that the OSA kiln was for the last time used between 1761?1841 A.D. and the OSB kiln between 1752?1831 A.D., at 95% probability. This study shows that intensity determinations do not restrict the dating results when referring to the last few centuries, as this period is characterized by very small intensity variations.
ISSN: 0039-3169

hal-01236052
https://hal.archives-ouvertes.fr/hal-01236052
DOI : 10.1007/s11200-015-0413-0