Éditeur(s) : HAL CCSD Springer Verlag (Germany) Springer Verlag
Résumé : International audience
The Cerro del Almirez massif (Spain) represents a unique fragment of serpentinized oceanic lithosphere that has been first equilibrated in the antigorite stability field (Atg-serpentinites) and then dehydrated into chlorite–olivine–orthopyroxene (Chl-harzburgites) at eclogite facies conditions during subduction. The massif preserves a dehydration front between Atg-serpentinites and Chl-harzburgites. It constitutes a suitable place to study redox changes in serpentinites and the nature of the released fluids during their dehydration. Relative to abyssal serpentinites, Atg-serpentinites display a low Fe3+/FeTotal(BR) (=0.55) and magnetite modal content (=2.8–4.3 wt%). Micro-X-ray absorption near-edge structure (μ-XANES) spectroscopy measurements of serpentines at the Fe–K edge show that antigorite has a lower Fe3+/FeTotal ratio (=0.48) than oceanic lizardite/chrysotile assemblages. The onset of Atg-serpentinites dehydration is marked by the crystallization of a Fe3+-rich antigorite (Fe3+/FeTotal = 0.6–0.75) in equilibrium with secondary olivine and by a decrease in magnetite amount (=1.6–2.2 wt%). This suggests a preferential partitioning of Fe3+ into serpentine rather than into olivine. The Atg-breakdown is marked by a decrease in Fe3+/FeTotal(BR) (=0.34–0.41), the crystallization of Fe2+-rich phases and the quasi-disappearance of magnetite (=0.6–1.4 wt.%). The observation of Fe3+-rich hematite and ilmenite intergrowths suggests that the O2 released by the crystallization of Fe2+-rich phases could promote hematite crystallization and a subsequent increase in fo2 inside the portion of the subducted mantle. Serpentinite dehydration could thus produce highly oxidized fluids in subduction zones and contribute to the oxidization of the sub-arc mantle wedge.
ISSN: 0010-7999

hal-01172310
https://hal.archives-ouvertes.fr/hal-01172310
DOI : 10.1007/s00410-015-1130-y

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
The Iberian Massif is the best exposed segment of the European Variscan Belt. It includes relatively well preserved terranes that were accreted by transpression along time and resulted in a number of geotectonic units that formed part of the Late Paleozoic assembly of the Pangaea Supercontinent. In SW Iberia, these units are the Central Iberian Zone (CIZ), Ossa Morena Zone (OMZ), and the South Portuguese Zone (SPZ). A 210 km long NE-SW magnetotelluric profile was carried out through the CIZ, from the OMZ-CIZ boundary toward the north, reaching the Tagus (Cenozoic) basin. Data dimensionality analysis resulted in a suitable 2-D electrical resistivity structure, allowing a 2-D inversion of the data set. Complementary available geophysical data (deep seismic, gravity and aeromagnetic) and a comparison with a detailed geological cross section led us to constrain the interpretation of the 2-D electrical resistivity structure of the CIZ crust. The results show, for the upper crust, the existence of diverse conductive/resistive bodies that correlate well with known geological features (sedimentary basins, faults, granitic plutons, mineralized systems). A mild but steady conductive band is located along the middle and lower crust that is interpreted as a mafic granulite basement. The upper section of this band connects with several elongated shallow conductors, providing further evidence for the existence, in the Central Iberian Zone, of a complex decollement system where the major faults are rooted. Such a crustal architecture is viewed as the northward continuation of the Variscan large-scale structures previously recognized in the southern sectors (OMZ and SPZ).
ISSN: 0148-0227

hal-00671036
https://hal.archives-ouvertes.fr/hal-00671036
DOI : 10.1029/2010JB007538

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
The Ronda peridotite supplies one of the best objects to document subcontinental mantle deformation, but its internal deformation and exhumation mechanisms remain controversial. Here we provide new structural data and numerical results that constrain the Oligocene-Miocene deformation history of the Ronda massif. We first describe a mantle shear zone in the northern massif that developed subcrustal strain localization during decompression and related partial melting. The deformation regime of this mantle shear zone evolved from penetrative NE-SW stretching to sinistral shear highlighted by discrete shear bands. We then show structural observations that document a viscous deformation in the southern massif occurring prior to the thrust-assisted emplacement of the peridotite during large decompression. Finally, we performed numerical investigations that quantify a high temperature of 980°C for the basal peridotite lens at the time of its crustal emplacement. Our numerical results constrain the timing of ductile deformation of the peridotite just before 22 Ma, probably between 30 and 22 Ma. Altogether, these features led us to conclude that the deformation and exhumation of the Ronda peridotite results from lithosphere thinning subsequently inverted in the course of the Oligocene-Miocene. Among available models, our findings support the hypothesis of peridotite exhumation by the inversion of a thinned back-arc continental lithosphere during westward slab rollback through the Alboran region.
ISSN: 0278-7407

insu-00924180
https://hal-insu.archives-ouvertes.fr/insu-00924180
https://hal-insu.archives-ouvertes.fr/insu-00924180/document
https://hal-insu.archives-ouvertes.fr/insu-00924180/file/tect20062.pdf
DOI : 10.1002/tect.20062

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We have inferred the deformation mechanisms of antigorite by high-resolution EBSD mapping of samples from Cerro del Almirez ultramafic massif (Betic Cordillera, SE Spain). Textural relations and phase diagram calculations constrain the foliation development conditions to the subduction prograde path at up to 600-630 °C and 1.6-1.9 GPa. Deformation was followed by static annealing of antigorite at ca. 680 °C. The Crystal Preferred Orientation (CPO) of antigorite is characterised by a strong alignment of (001) poles normal to the foliation plane and a weaker, but clear, parallelism between [100] axes and the macroscopic lineation defined by the elongation of magnetite aggregates. Analysis of misorientations across subgrains shows predominance of [010] rotation axis, consistent with activation of the [100](001) slip system. However, tilt subgrain boundaries subparallel to (100), probably formed by edge dislocations of this system, are subsidiary. Most subgrain boundaries are subparallel to (001) planes. They are interpreted as (001) twins wherein continuing viscoplastic deformation resulted in a slight increase of the misorientation between the twins. Modelling of the evolution of the antigorite CPO using a lower bound approach and considering different deformation regimes and sets of basal and non-basal slip systems has shown that intensities of [100] and [010] maxima reflect the relative strength of the antigorite [100](001) and [010](001) systems. Activation of other basal or non-basal slip systems does not change significantly the CPO patterns, but results in less concentrated CPO. 3D transpression models better reproduce the CPO of natural antigorite serpentinites. We propose that the widespread occurrence of strong CPO in high-pressure antigorite serpentinite is consistent with deformation by dislocation creep with dominant glide on [hk0](001), together with the activation of twinning, implying that a power law rheology would better account for the mechanical behaviour of antigorite serpentinite deep in the subduction channel and mantle wedge.
ISSN: 0012-821X

hal-00795511
https://hal.archives-ouvertes.fr/hal-00795511
DOI : 10.1016/j.epsl.2012.06.049

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We discuss mantle structure and dynamics under the Gibraltar arc. For that region, a large variety of geodynamic models has been proposed, and there was, up to recently, no consensus on which of these models is the best one to describe the geodynamic situation of the region. The key to distinguishing the different models probably lies in the upper mantle, and we propose two specially adapted seismological techniques that help to distinguish each of the two models that are more frequently invoked. These are, on one hand, the subduction-rollback (SR) model, and on the other, continental delamination or convective removal (CDCR). The first technique that we use is based on observations of dispersed P-wavetrains that are expected for certain ray directions. Observations made on the Gibraltar arc suggest the presence of subducted oceanic lithosphere under the Alboran Sea. The second technique is based on shear-wave splitting of SKS phases, and it allows us to look for the radially-oriented flow that must be present in the mantle beneath the Alboran Sea, for a CDCR mechanism. There are however no indications of any radial flow up to this point. Both approaches therefore suggest that subduction-rollback is the best model to explain the complex geodynamic situation under the region.
ISSN: 0040-1951

hal-01388041
http://hal.univ-reunion.fr/hal-01388041
http://hal.univ-reunion.fr/hal-01388041/document
http://hal.univ-reunion.fr/hal-01388041/file/Bokelmann_Gibraltar_Tphy2011_hal.pdf
DOI : 10.1016/j.tecto.2010.08.004

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Geochronological studies of samples from continuous crustal sections of fossil intra-oceanic arcs are paramount for determining the precise timing of major processes that took place during the building of an oceanic island-arc crust. In this study, laser ablation ICP-MS U-Pb zircon (and conventional Rb-Sr) analyses pinpoint the timing of major events responsible for crustal growth of the Kohistan paleo-island arc (Northern Pakistan). Inheritance in magmatic rocks is evidence for recycling of intra-arc material and indicates that the Kohistan arc may have formed as early as 135 +/- 4 Ma. One older inherited grain indicates that the arc developed on a young oceanic lithosphere whose remnants include a c. 175 Ma old component. An interesting consequence is that intra-oceanic arc magmas can yield inherited zircons, which can be much older than the arc system itself without requiring recycling back into the mantle by subduction processes. In the case of the Kohistan arc, ante-arc Neotethys oceanic lithosphere was tapped by arc magmas during their way upward into the arc crust. The oldest magmatic ages measured in this study fall in the range 101-102 Ma (100.9 +/- 0.6 and 102.1 +/- 0.4 Ma). This period corresponds to arc build-up and thickening of the arc crust. Leucogranitic melts dated at 89.9 +/- 0.4 Ma and 90.9 +/- 1.0 Ma are considered as produced by dehydration/melting reaction accompanying granulitisation of the thickened lower arc crust. A maximum age for this event is 97.7 +/- 0.7 Ma, the age of emplacement of a garnet meta-tonalite affected by granulite facies metamorphism. Magmatic activity was still ongoing during and after the granulitisation as testified by emplacement of a diorite and a gabbro dated at 89.1 +/- 0.6 and 88.2 +/- 0.9 Ma respectively. The upper part of the metaplutonic sequence contains diorite samples dated at 84.6 +/- 0.5 Ma and 84.3 +/- 0.5 Ma and as young as 81.1 +/- 0.7 Ma. During this period, and based on the present day outcropping sequences, the mean crustal growth rate varied from 32 to 65 km(3)/km/Ma (volume per unit width along the strike of the arc) which is comparable to the range for present day arcs of the Western Pacific region. The correspondence of crustal growth rates observed for present-day island arcs and the good preservation of the crustal section in the Kohistan arc, make this area an exceptional natural laboratory to study arc related processes and to check models of continental crust formation by arc accretion.
ISSN: 0012-821X

hal-00644555
https://hal.archives-ouvertes.fr/hal-00644555
DOI : 10.1016/j.epsl.2011.07.016

Éditeur(s) : HAL CCSD Universidad Complutense de Madrid
Résumé : Based on new seismological and recent faulting data, we analyze five main sectors in the western part of the Betic Cordillera from an active tectonic perspective: i. The northwestern frontal sector of the cordillera, including the Morón de la Frontera area, with shallow (< 15 km depth) seismogenic active NE-SW reverse and strike-slip faults that do not reach the surface. ii. The Teba area, in the External Zones, which is deformed by sparse N-S to NW-SE normal faults with associated wedges of Quaternary sediments and active strike-slip faults at intermediate crustal levels. iii. The Ronda Basin, representing the major Late Miocene intramontane basin of the western Betic Cordillera, is mainly deformed by NNE-SSW and WNW-ESE folds and locally by NW-SE normal faults. iv. The internal part of the orogen, which is characterized by shallow (<40 km) and intermediate (40 to 120 km depth) seismicity beneath Málaga and the Alborán Sea, ENE-WSW folding, relief uplift, river incision and scarce active faults with surface expression. v. The Spanish Atlantic coast, which coincides with the western end of the Betic orogen, where Pliocene to Quaternary shallowmarine sedimentary rocks are deformed by meso-scale NW-SE oriented normal faults and few ENE-WSW reverse faults. These data support the recent tectonic activity of the western Betic Cordillera determined by the NW-SE Eurasian-African convergence with variable features from the mountain front, characterized by shallow deformations, up to the Internal Zones that mainly undergo uplift and intermediate seismicity.
ISSN: 1698-6180

hal-00750359
https://hal.archives-ouvertes.fr/hal-00750359
DOI : 10.5209/rev_JIGE.2012.v38.n1.39211

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : Mantle xenoliths in Pliocene alkali basalts of the eastern Betics (SE Iberia, Spain) are spinel ± plagioclase lherzolite, with minor harzburgite and wehrlite, displaying porphyroclastic or equigranular textures. Equigranular peridotites have olivine crystal preferred orientation (CPO) patterns similar to those of porphyroclastic xenoliths but slightly more dispersed. Olivine CPO shows [100]-fiber patterns characterized by strong alignment of [100]-axes subparallel to the stretching lineation and a girdle distribution of [010]-axes normal to it. This pattern is consistent with simple shear or transtensional deformation accommodated by dislocation creep. One xenolith provides evidence for synkinematic reactive percolation of subduction-related Si-rich melts/fluids that resulted in oriented crystallization of orthopyroxene. Despite a seemingly undeformed microstructure, the CPO in orthopyroxenite veins in composite xenoliths is identical to those of pyroxenes in the host peridotite, suggesting late-kinematic crystallization. Based on these observations, we propose that the annealing producing the equigranular microstructures was triggered by melt percolation in the shallow subcontinental lithospheric mantle coeval to the late Neogene formation of veins in composite xenoliths. Calculated seismic properties are characterized by fast propagation of P waves and polarization of fast S waves parallel to olivine [100]-axis (stretching lineation). These data are compatible with present-day seismic anisotropy observations in SE Iberia if the foliations in the lithospheric mantle are steeply dipping and lineations are subhorizontal with ENE strike, implying dominantly horizontal mantle flow in the ENE-WSW direction within vertical planes, that is, subparallel to the paleo-Iberian margin. The measured anisotropy could thus reflect a lithospheric fabric due to strike-slip deformation in the late Miocene in the context of WSW tearing of the subducted south Iberian margin lithosphere.
ISSN: 0278-7407

Droits : info:eu-repo/semantics/OpenAccess
hal-01685809
https://hal.archives-ouvertes.fr/hal-01685809
https://hal.archives-ouvertes.fr/hal-01685809/document
https://hal.archives-ouvertes.fr/hal-01685809/file/Hidas_et_al-2016-Tectonics.pdf
DOI : 10.1002/2016TC004165

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Active faults from the Campo de Dalías (SE Betic Cordillera) allow us to constrain the deformation styles involved in the development of segmented oblique-slip faults. This sector constitutes the widest outcrop of Plio-Quaternary sediments in the northern boundary of the Alboran Sea. It has emerged since the Late Pliocene, and therefore provides recent deformation markers that are not disturbed by erosive processes. The faults started to grow during the Pleistocene, reactivating previous hybrid joints, with a normal-dextral slip. We present a detailed map of the largest fault in the area, the Loma del Viento fault, comprising six onshore segments. Based on field work and aerial photography, the distributions of the contiguous joints have been mapped, and the joints reactivated as faults are identified. Some of these fault segments are hard-linked, and fault slip enhances toward the linkage sectors between them with associated sedimentary depocenters. An electrical tomography profile reveals the wedge geometry of a unit of Pleistocene conglomerates and red silts that were coevally deposited during the fault movement. Long-term slip rate in the central part of the fault is estimated at 0.07 ± 0.03 mm/y. In addition, a seismic crisis nucleated close to the Loma del Viento fault during November 2010 was recorded. Moment tensor analysis of the two mainshocks (Mw 3.5 and 4.2) provides a focal solution indicating a N120°E striking right-lateral strike-slip fault. The corrugated morphology of the Loma del Viento fault may have influenced its seismic behavior. Some of the fault segments are oblique to the general motion of the fault. These oblique segments would provide higher resistance against the general fault motion and could lock the fault, leading to accumulate elastic energy.
ISSN: 0040-1951

hal-00750357
https://hal.archives-ouvertes.fr/hal-00750357
DOI : 10.1016/j.tecto.2011.12.001

Éditeur(s) : HAL CCSD European Geosciences Union
Résumé : We designed a thermo-mechanical numerical model for fast-spreading mid-ocean ridge with variable viscosity, hydrothermal cooling, latent heat release, sheeted dyke layer, and variable melt intrusion possibilities. The model allows for modulating several accretion possibilities such as the "gabbro glacier" (G), the "sheeted sills" (S) or the "mixed shallow and MTZ lenses" (M). These three crustal accretion modes have been explored assuming viscosity contrasts of 2 to 3 orders of magnitude between strong and weak phases and various hydrothermal cooling conditions depending on the cracking temperatures value. Mass conservation (stream-function), momentum (vorticity) and temperature equations are solved in 2-D cartesian geometry using 2-D, alternate direction, implicit and semi-implicit finite-difference scheme. In a first step, an Eulerian approach is used solving iteratively the motion and temperature equations until reaching steady states. With this procedure, the temperature patterns and motions that are obtained for the various crustal intrusion modes and hydrothermal cooling hypotheses display significant differences near the mid-ocean ridge axis. In a second step, a Lagrangian approach is used, recording the thermal histories and cooling rates of tracers travelling from the ridge axis to their final emplacements in the crust far from the mid-ocean ridge axis. The results show that the tracer's thermal histories are depending on the temperature patterns and the crustal accretion modes near the mid-ocean ridge axis. The instantaneous cooling rates obtained from these thermal histories betray these discrepancies and might therefore be used to characterize the crustal accretion mode at the ridge axis. These deciphering effects are even more pronounced if we consider the average cooling rates occurring over a prescribed temperature range. Two situations were tested at 1275-1125 °C and 1050-850 °C. The first temperature range covers mainly the crystallization range that is characteristic of the high temperature areas in the model (i.e. the near-mid-oceanic-ridge axis). The second temperature range corresponds to areas in the model where the motion is mainly laminar and the vertical temperature profiles are closer to conductive. Thus, this situation results in less discriminating efficiency among the crustal accretion modes since the thermal and dynamic properties that are described are common to all the crustal accretion modes far from the ridge axis. The results show that numerical modeling of thermo-mechanical properties of the lower crusts may bring useful information to characterize the ridge accretion structure, hydrothermal cooling and thermal state at the fast-spreading ridges and may open discussions with petrological cooling rate results.
ISSN: 1991-959X

hal-00907012
https://hal.archives-ouvertes.fr/hal-00907012
DOI : 10.5194/gmd-6-1659-2013

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
The Atlas Mountains are characterized by high elevations and Quaternary volcanism. Long period magnetotelluric data acquired along a NNW-SSE transect reveal the presence of a conductive anomalous mantle below the High Atlas. Data dimensionality analyses show a preferent N80 degrees E strike of the deep resistivity structure in agreement with the induction vector alignment at long periods. Accordingly, a 2D inversion of the data set was carried out. Large resistive bodies at the crustal basement most likely correspond to batholiths emplaced in more conductive metapelites. They are covered by outcropping conductive sedimentary detritic and carbonate rocks. Lithospheric thinning producing anomalous mantle and basin development in the Atlas probably started during Triassic-Jurassic rifting. Inversion tectonics since the Oligocene produced low shortening on previous lithospheric weak zones, with thrusting of the Atlas above the stable African plate. Melting at the top of the anomalous mantle is connected with Quaternary basaltic volcanism in the Middle Atlas.
ISSN: 0278-7407

hal-00671017
https://hal.archives-ouvertes.fr/hal-00671017
DOI : 10.1029/2010TC002859

Éditeur(s) : HAL CCSD University of Chicago Press
Résumé : International audience
Contrasting tectonic reconstructions of the westernmost Mediterranean have been proposed to explain the origin of the Alboran marine basin contemporaneously with Cenozoic convergence between the African and European plates. Cr-rich pyroxenites in the Ronda massif record the geochemical processes occurring in the subcontinental mantle of the Alboran domain in the Late Oligocene, thus constraining the geodynamic scenario of Cenozoic extension in the western Mediterranean lithosphere. Clinopyroxene in intrusive Cr-rich websterite dikes crosscutting the Ronda peridotite is strongly depleted in Nb-Ta and enriched in light rare earth elements, as typically observed in arc magmas, and is in trace element equilibrium with Neogene subduction-related lavas from the western and central Mediterranean. Sr-Nd-Pb radiogenic isotopes indicate that the mantle source of the Ronda pyroxenite dikes was contaminated by a subduction component released by detrital sediments likely deposited in passive continental margins. Rather than convective removal or delamination of the lithospheric root, our data strongly support Alboran geodynamic models that envisage slab rollback as the tectonic mechanism responsible for the Miocene lithospheric thinning. The Ronda Cr-rich pyroxenite dikes represent the earliest unambiguous manifestation of subduction-related magmatism in the western Mediterranean and testify to the involvement of terrigenous sediments in the primitive stages of subduction.
ISSN: 0022-1376

hal-00745853
https://hal.archives-ouvertes.fr/hal-00745853
DOI : 10.1086/663875

Éditeur(s) : HAL CCSD
Résumé : The mantle deformation processes that control the thinning and break-up of continental lithosphere remain poorly understood. Our knowledge is restricted to either lithospheric scale thermo-mechanical models --that use experimentally derived flow laws--, geophysical imaging and/or rare xenoliths from active continental rifts, such as the East African Rift System. The originality of this work relies on the study of the two largest outcrops of diamond facies subcontinental lithospheric mantle in the world: the Beni Bousera and Ronda peridotite massifs in N Morocco and S Spain, respectively. The structures and petrologic and metamorphic zoning preserved in these massifs --implying a polybaric and polythermal evolution-- provides a unique opportunity to investigate the thermo-mechanical evolution of thick subcontinental lithospheric mantle in extensional settings. In this thesis we studied the deformation mechanisms in both peridotites and pyroxenites to constrain the modes of exhumation of subcontinental lithospheric mantle from garnet-, to spinel-, and finally, to plagioclase lherzolite facies conditions. We combined field mapping of tectonometamorphic domains and structural mapping of ductile structures, microstructural analysis, crystal preferred orientations (CPO) measurements and conventional thermobarometric calculations and thermodynamic modeling (Perple_X) to unravel the pressure and temperature conditions of deformation. We showed that exhumation from garnet- to spinel lherzolite facies conditions was accommodated by fast shearing --in thermal disequilibrium--along a lithospheric scale transtensional shear zone. In this context, the petrological zoning and the large temperature gradient (ca. 100ºC/km) preserved in the Beni Bousera massif represent the mechanical juxtaposition of progressively deeper and hotter lithospheric levels at depths of ca. 60 km in the latest Oligocene (ca. 25 Ma). Final exhumation from spinel- to plagioclase facies lherzolite and emplacement into the crust is best recorded in the Ronda massif where it occurred by inversion and lithospheric scale folding of the highly attenuated continental lithosphere in a back-arc region, probably in relation with southward slab rollback and subsequent collision with the palaeo-Maghrebien passive margin in the early Miocene (21-23 Ma).
Les processus de déformation contrôlant l'amincissement de la lithosphère continentale sont encore mal contraints. Nos connaissances sont principalement basées sur la modélisation thermomécanique d'extension à l'échelle de la lithosphère--utilisant des lois rhéologiques derivées expérimentalement, l'imagerie géophysique et l'analyse de xénolithes provenant de rift continentaux actifs à ce jour, tels que le Rift Est-Africain. L'originalité de ce travail reside dans l'étude des deux plus grands massifs de péridotites sous-continentales ayant enregistrées des conditions primaires du facies à diamant: les massifs de Beni Bousera au nord du Maroc et de Ronda au sud de l'Espagne, respectivement. Les structures et la zonation petrologique et métamorphique --impliquant une évolution polybarique et polythermique-- préservéees dans ces massifs offrent une opportunité unique pour étudier l'évolution thermo-mécanique du manteau sous-continental dans un contexte extensif. Dans ce travail, nous avons étudié les mécanismes de déformation des péridotites et des pyroxénites afin de contraindre les modes d'exhumation du manteau lithosphérique sous-continental, depuis des conditions du facies des lherzolites à grenat, jusqu'au facies à spinelle et enfin à plagioclase. Nous avons combiné la cartographie des faciès tectono-métamorphiques et des structures ductiles de déformation, l'analyse des microstructures, la mesure d'orientations préférentielles de réseau (OPR), et la géothermobarométrie conventionelle couplée à la modélisation thermodynamique (PerpleX) afin de contraindre les conditions de pression et température de la déformation. Nous avons montré que l'exhumation précoce du facies à grenat au facies à spinelle était accomodée par une faille transtensive affectant le manteau lithosphérique. Dans ce contexte, la zonation tectono-métamorphique et le gradient thermique important (ca. 100ºC/km) préservés à Beni Bousera résultent de la juxtaposition mécanique de domaines lithosphériques initialement équilibrés à différentes pressions et températures, fossilisée à une profondeur de ca. 60 km durant l'Oligocène supérieur (ca. 25 Ma). L'exhumation finale du facies de lherzolite à spinelle au facies à plagioclase et l'emplacement final dans la croûte, mieux enregistrés dans Ronda, se sont produits par inversion et plissement de la section lithosphérique fortement amincie dans un contexte arrière-arc, probablement lors du retrait vers le sud de la lithosphère subduite et la collision de l'arc avec les paléo-marges maghrébines au Miocène inférieur (21-23 Ma).
https://tel.archives-ouvertes.fr/tel-00767700

tel-00767700
https://tel.archives-ouvertes.fr/tel-00767700
https://tel.archives-ouvertes.fr/tel-00767700/document
https://tel.archives-ouvertes.fr/tel-00767700/file/THESE_Frets.pdf

Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
A NE-SW magnetotelluric 110 km-long profile including 18 sites was acquired across the western Rif Cordillera along the Eurasian-African plate boundary, allowing to constrain its poorly known deep structure. It extends from the Internal Zones, close to the Alboran coast, crossing the External Zones and up to the Gharb foreland basin. The periods recorded range from 0.001 s to 1000 s. The combination of magnetotelluric data with available geological data provides new insight regarding the relationship between deep and shallow crustal structures of the Rif Cordillera. Analyses of structural dimensionality suggest a preferential NW-SE direction, and a 2D joint inversion was performed. A 3D inversion extending the 2D model along the strike confirmed the reliability of this approach. The magnetotelluric model shows a heterogeneous upper crust in agreement with the geological structures observed at surface. The Internal Zones correspond to resistive (metamorphic rocks) and conductive (peridotites) bodies, while the External Zones and the foreland basin are characterized by large conductive bodies of variable thickness. A crustal detachment level separating shallow geological units from a probable variscan basement was inferred. At depth, the most relevant feature consists of large resistive bodies with a shallow irregular top, located below the frontal part of the Rif. The outcrops of exotic metapelitic, granitic and gneissic blocks in the frontal part of the Cordillera suggest that these large resistive bodies may correspond to a gneissic or granitic basement surrounded by metapelitic rocks. Late contractive thrust and diapiric processes were responsible for their uplift and shallow emplacement. The Rif constitutes an active southwestward vergent orogenic wedge, oblique to the present-day NW-SE convergent Eurasian-African plate boundary.
ISSN: 1525-2027

hal-00670999
https://hal.archives-ouvertes.fr/hal-00670999
DOI : 10.1029/2011GC003783

Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
We propose a new thermomechanical numerical model of mid-ocean ridge accretion aimed at investigating asymmetric spreading rates, diverse configurations of lens and sill magma injections, crystallization and depth, and on- and off-axis patterns of hydrothermal cooling. The numerical algorithm iteratively resolves temperature and motion equations until it reaches a stationary solution. The motion equation was written in a vorticity-stream function formalism, with boundary and internal conditions applied to the stream function to impose the style of magma injection. Unlike in previous models, our model does not assume an a priori shape for the temperature field, which is initiated by an initial half-space cooling according to the left and right spreading rates. Complex patterns of hydrothermal cooling are simulated by enhanced thermal diffusivity. The model succeeds in describing the dynamic and thermal effects of spreading rates, the style of magma intrusion, and the hydrothermal cooling. Accurate descriptions of these are essential to study the cooling histories of crustal rocks and geophysical observables.
ISSN: 1525-2027

hal-00413118
https://hal.archives-ouvertes.fr/hal-00413118
DOI : 10.1029/2008GC002270

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Massif du Sud is a large ophiolitic complex that crops out in the southern region of New Caledonia (SW Pacific). It is dominated by harzburgite tectonite that locally shows a transitional gradation to massive dunite up section. Clinopyroxene, orthopyroxene and plagioclase progressively appear in dunite up to the transition to layered wehrlite and orthopyroxene-gabbro. The dunite-wehrlite and wehrlite-gabbro contacts are parallel and the latter defines the paleo-Moho.;Highly depleted modal, mineral and bulk rock compositions indicate that harzburgites are residues after high degrees (20-30%) of partial melting mainly in the spinet-stability field. Their relative enrichment in HFSE, LREE and MREE is due to re-equilibration of melting residues with percolating melts. Dunite formed in the Moho transition zone by reaction between residual mantle harzburgite and olivine-saturated melts that led to pyroxene dissolution and olivine precipitation. Rare clinopyroxene and plagioclase crystallized in interstitial melt pores of dunite from primitive, low-TiO2, ultra-depleted liquids with a geochemical signature transitional between those of island arc tholeiites and boninites.;Ascending batches of relatively high-SiO2, ultra-depleted melts migrated through the Moho transition zone and generated wehrlite by olivine dissolution and crystallization of clinopyroxene, orthopyroxene and plagioclase in variable amounts. These liquids were more evolved and were produced by higher degrees of melting or from a more depleted source compared with melts that locally crystallized clinopyroxene in dunite. Ultra-depleted magmas, non-cogenetic with those that formed the Moho transition zone, ascended to the lower crust and generated gabbroic cumulates with subduction-related affinity. Thus, the ultramafic and mafic rocks in the Moho transition zone and lower crust of the Massif du Sud ophiolite are not products of fractional crystallization from a single magma-type but are the result of migration and accumulation of different melts in a multi-stage evolution. The record of high partial melting in the mantle section, and migration and accumulation of ultra-depleted subduction-related melts in the Moho transition zone and lower crust support that the Massif du Sud ophiolite is a portion of forearc lithosphere generated in an extensional regime during the early phases of the subduction zone evolution. Our results show the existence of different types of ultra-depleted melt compositions arriving at the Moho transition zone and lower crust of an infant intraoceanic paleo-arc. Ultra-depleted melts may thus be a significant component of the melt budget generated in oceanic spreading forearcs prior to aggregation and mixing of a large range of melt compositions in the crust.
ISSN: 0009-2541

hal-00429333
https://hal.archives-ouvertes.fr/hal-00429333
DOI : 10.1016/j.chemgeo.2009.06.004

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
The processes active in the deep crust above an oceanic subduction zone during its evolution have been constrained through a detailed geochemical study (major and trace elements and Sr, Nd and Pb isotopes) of representative samples through an 30 km thick exhumed crustal section of the Cretaceous Kohistan oceanic island arc (Northern Pakistan). The use of both trace elements and radiogenic isotopes reveals two distinct geochemical suites (suites A and B) within the JijalPatanKiruKamila (JPKK) complex. Suite A is characterized by a progressive enrichment in Pb-207 and a decrease in Nd-143/Nd-144 with increasing La-N/Sm-N. Suite B has higher Pb-207/Pb-204 and lower Nd-143/Nd-144 ratios with approximately constant La-N/Sm-N. By combining trace elements with different partitioning behaviour it is demonstrated that there is an increasing contribution of the subduction component in the magmas with time. It is also possible to distinguish a slab component imprint carried by aqueous fluids from one corresponding to sediment melts. Intrusive granites are abundant in the upper levels of the JPKK section. All were generated at the arc root level (Jijal crustal section) during dehydration-melting of hornblende-rich plutonic rocks. A three-stage geodynamic model is proposed for the evolution of the arc over a period of 30 Myr. The first stage (117105 Ma) starts with the onset of subduction, which was followed by the building of the volcanic arc. The second stage (10599 Ma to 9691 Ma) corresponds to a major igneous event, which was characterized by abundant magma underplating and granulite-facies metamorphism at the arc base. Recycling of the residualcumulative lower crust into the convective asthenospheric mantle was efficient during this stage, and was probably related to thermo-mechanical erosion of the base of the crust. The last stage (9585 Ma) corresponds to a period of low magmatic activity, which marked the end of the intra-oceanic subduction. This is related to the formation of a cold blanket above the slab surface as a result of thermo-mechanical erosion of the cold walls of the subduction zone (i.e. the upper part of the slab and the base of the overriding plate), and corner flow dragging the cold material into the zone of melt generation. Ultimately, a voluminous magmatic pulse occurred around 85 Ma (forming the Chilas complex), before arccontinent collision.
ISSN: 0022-3530

hal-00420068
https://hal.archives-ouvertes.fr/hal-00420068
DOI : 10.1093/petrology/egp010

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We present new Sr-Nd-Pb isotope data of the western Alpujárride metamorphic basement and the pre-Miocene Flysch sediments of the Betic Cordillera (southern Spain). Nd model ages are consistent with an increasing detrital input from the Alborán domain to the Flysch Trough in the western Mediterranean during the late Oligocene. The Alpujárride metamorphic crustal rocks derived from Archean-Paleoproterozoic terranes located along the northern margin of Gondwana in the Neoproterozoic. The heterogeneous isotopic signatures of the Alpujárride units indicate that they have different sedimentary protoliths and underwent contrasted Variscan and pre-Variscan tectono-magmatic evolutions. Melts/fluids derived from the western Alpujárride gneisses contaminated the mantle source of the Ronda high-Mg pyroxenite dykes, implying that the Alpujárride lower crust underthrusted the subcontinental lithospheric mantle of the Alborán domain generating subduction-like magmatism in the late Oligocene. The western Alpujárride upper crust is involved in the Neogene volcanism of the Alborán Sea basin, but only contaminated some LREE-enriched calc-alkaline lavas erupted along the continental margins. On the other hand, tholeiitic lavas in the center of the basin show no isotopic evidence of crustal assimilation. This indicates that most of the crust in the central Alborán Sea accreted by Miocene tholeiitic magmatism and that Alpujárride lower crust is absent and likely foundered close to the continental margins of the basin.
ISSN: 0024-4937

hal-01526912
https://hal.archives-ouvertes.fr/hal-01526912
DOI : 10.1016/j.lithos.2016.10.003

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
IODP Hole U1309D (Atlantis Massif, Mid-Atlantic Ridge 30 degrees N) is the second deepest hole drilled into slow spread gabbroic lithosphere. It comprises 5.4% of olivine-rich troctolites (->70% olivine), possibly the most primitive gabbroic rocks ever drilled at mid-ocean ridges. We present the result of an in situ trace element study carried out on a series of olivine-rich troctolites, and neighbouring troctolites and gabbros, from olivine-rich intervals in Hole U1309D. Olivine-rich troctolites display poilkilitic textures; coarse-grained subhedral to medium-grained rounded olivine crystals are included into large undeformed clinopyroxene and plagioclase poikiloblasts. In contrast, gabbros and troctolites have irregularly seriate textures, with highly variable grain sizes, and locally poikilitic clinopyroxene oikocrysts in troctolites. Clinopyroxene is high Mg# augite (Mg# 87 in olivine-rich troctolites to 82 in gabbros), and plagioclase has anorthite contents ranging from 77 in olivine-rich troctolites to 68 in gabbros. Olivine has high forsterite contents (82-88 in olivine-rich troctolites, to 78-83 in gabbros) and is in Mg-Fe equilibrium with clinopyroxene. Clinopyroxene cores and plagioclase are depleted in trace elements (e.g., Yb-cpx similar to 5-11 x Chondrite), they are in equilibrium with the same MORB-type melt in all studied rock-types. These compositions are not consistent with the progressively more trace element enriched (evolved) compositions expected from olivine rich primitive products to gabbros in a MORB cumulate sequence. They indicate that clinopyroxene and plagioclase crystallized concurrently, after melts having the same trace element composition, consistent with crystallization in an open system with a buffered magma composition. The slight trace element enrichments and lower Cr contents observed in clinopyroxene rims and interstitial grains results from crystallization of late-stage differentiated melts, probably indicating the closure of the magmatic system. In contrast to clinopyroxene and plagioclase, olivine is not in equilibrium with MORB, but with a highly fractionated depleted melt, similar to that in equilibrium with refractory oceanic peridotites, thus possibly indicating a mantle origin. In addition, textural relationships suggest that olivine was in part assimilated by the basaltic melts after which clinopyroxene and plagioclase crystallized (impregnation). These observations suggest a complex crystallization history in an open system involving impregnation by MORB-type melt(s) of an olivine-rich rock or mush. The documented magmatic processes suggest that olivine-rich troctolites were formed in a zone with large magmatic transfer and accumulation, similar to the mantle-crust transition zone documented in ophiolites and at fast spreading ridges.
ISSN: 0009-2541

hal-00420916
https://hal.archives-ouvertes.fr/hal-00420916
DOI : 10.1016/j.chemgeo.2009.02.013

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
The Ronda peridotite massif in Southern Spain shows a well-defined 'recrystallization' front that separates a large-scale partial melting domain formed at the expense of the continental lithospheric mantle from a 'preserved' lithospheric domain. To investigate the processes allowing a transient lithosphere-asthenosphere boundary to propagate in the lithospheric mantle, we performed a joint petrostructural and geochemical study of an similar to 2.5 km(2) zone extending from the melting front to the mylonites that mark the western limit of the massif. This study emphasizes a feedback between heat transfer, melt percolation, and deformation in the lithospheric mantle. Petrographical observations and geochemical data show that heterogeneous reactive percolation of melts produced in the underlying partial melting domain led to refertilization of lithospheric peridotites up to 1.5 km ahead from the melting front, producing metre-scale layering of fertile and refractory mantle rocks. Within 800 m from the front, pre-existing garnet pyroxenite layers were partially molten and the resulting melts probably contributed to the refertilization process. Detailed structural mapping and analysis of the microstructures and crystal preferred orientations highlight the relations between reactive melt transport and deformation, and the control of the temperature gradient on both processes. Parallelism between the recrystallization front, compositional boundaries, and deformation structures, as well as variations in the deformation intensity of pyroxenes and spinels, suggest syn- to late-tectonic melt transport controlled by both the deformation and the thermal gradient. Variations in the strength of olivine crystal preferred orientations as a function of the modal and chemical composition of the spinel tectonites point to a higher contribution of diffusion to deformation in the most fertile rocks, corroborating the hypothesis that deformation occurred in presence of melt. Finally, the systematic dispersion of olivine [100] and orthopyroxene [001] axes in the foliation plane suggests a dominantly transpressive deformation regime.
ISSN: 0022-3530

hal-00420904
https://hal.archives-ouvertes.fr/hal-00420904
DOI : 10.1093/petrology/egp032