Éditeur(s) : HAL CCSD Elsevier
Résumé : Folds with hinge lines subparallel to stretching lineation are common features in shear zones and represent extreme cases of fold modification. However, their microstructures and in particular their kinematic significance remain poorly understood. Here we describe the meso- and micro-scale structures and crystallographic preferred orientation (CPO) of quartz and muscovite from a metric-scale shear-modified fold from Plattjen, Saas Fee, Western Internal Alps. The studied fold is of class-2 and the samples collected around the fold have essentially the same microstructures. Quartz [c]-axes plotted in the tectonic coordinate system exhibit an apparent reverse obliquity on opposing limbs. Muscovite fabrics are controlled essentially by the orientation of {001} planes. If the CPO data are plotted in a common reference frame (e.g. either fold or geographical), all samples exhibit essentially the same patterns for both minerals. In particular, relative to the fold axis and axial surface, the reversal of quartz CPO obliquity on opposing limbs is no longer evident. The small obliquity (~ 15°) between the intersection lineation of the two planes of {001} of muscovite and the fold axis results in the apparent reversal of shear sense on opposite limbs when viewing the CPO related to the macroscopic fabric. The homogeneity of the microstructures and CPOs of quartz and muscovite across the fold support the interpretation that the fold developed during simultaneous activation of heterogeneous and homogeneous simple shear, with the former responsible for fold development and the latter responsible for fold rotation and the overwhelming of the heterogeneous deformation. These processes led to the observed parallelism between fold hinge line and local stretching lineation.
ISSN: 0040-1951

hal-00824537
https://hal.archives-ouvertes.fr/hal-00824537
DOI : 10.1016/j.tecto.2011.03.003

Éditeur(s) : HAL CCSD Springer Verlag (Germany) Springer Verlag
Résumé : International audience
La Cabaña peridotite is part of a dismembered ophiolite complex located within the metamorphic basement of the Coastal Cordillera of south-central Chile, and is the only location in Chile were Cr-spinels have been described so far. The La Cabaña peridotite is part of the Western Series unit, which comprises meta-sedimentary rocks, metabasites, and serpentinized ultramafic rocks. This unit has been affected by greenschist-facies metamorphism with reported peak PT conditions of 7.0–9.3 kbar and 380°–420 °C. Within La Cabaña peridotite Cr-spinels are present in two localities: Lavanderos and Centinela Bajo. In Lavanderos, Cr-spinel occurs in small chromitite pods and as accessory/disseminated grains with a porous or spongy texture in serpentinite, whereas in Centinela Bajo Cr-spinel is present as accessory zoned grains in partly serpentinized dunites, and in chromitite blocks. All Cr-spinels display variable degrees of alteration to Fe2+-rich chromite with a variation trend of major elements from chromite to Fe2+-rich chromite similar to those observed in other locations, i.e., an increase in Fe2O3 and FeO, a decrease in Al2O3 and MgO. Cr2O3 content increases from chromite to Fe2+-rich chromite in chromitite pods from Lavanderos and chromitite blocks from Centinela Bajo, but decreases in ferrian chromite zones in accessory grains from Centinela Bajo. The minor element (Ti, V, Zn, Ni) content is mostly low and does not exceed 0.4 wt.%, with the exception of MnO (<0.9 wt.%), which shows a correspondence with increasing degree of alteration. Cr# (Cr/Cr + Al) versus Mg# (Mg/Mg + Fe2+) and Fe3+/Fe3++Fe2+ versus Mg# plots are used to illustrate the Cr-spinel alteration process. Overall, the Cr-spinels from Lavanderos (chromitite pods and disseminated grains) exhibit Cr# values ranging from 0.6 to 1.0, Mg# (Mg/Mg + Fe2+) below 0.5, and (Fe3+/Fe3++Fe2+) <0.4. Cr-spinels from chromitites in Centinela Bajo have Cr# and Mg# values that range from 0.65 to 1.0, and 0.7-0.3, respectively, and (Fe3+/Fe3++Fe2+) < 0.4. Accessory Cr-spinels from Centinela Bajo have Cr# and Mg# values that range from 0.55 to 1.0, and 0.6- < 0.1, respectively. The (Fe3+/Fe3++Fe2+) ratio is less than 0.4 in chromite cores and Fe2+-rich chromite, and >0.5 in ferrian chromite and Cr-magnetite. Interpretation of the data obtained and Cr-spinel textures indicate that the alteration of Cr-spinel is a progressive process that involves in its initial stages the reaction of chromite with olivine under water-saturated conditions to produce clinochlore and Fe2+-rich chromite. During this stage the chromite can also incorporate Ni, Mn, and/or Zn from the serpentinization fluids. As alteration progresses, Fe2+-rich chromite loses mass resulting in the development of a spongy texture. In a later stage and under more oxidizing conditions Fe3+ is incorporated in chromite/Fe2+-rich chromite shifting its composition to an Fe3+-rich chromite (i.e., ferrian chromite). Depending on the fluid/rock and Cr-spinel/silicate ratios, Cr-magnetite can also form over Fe2+-rich chromite and/or ferrian chromite as a secondary overgrowth. The compositional changes observed in Cr-spinels from La Cabaña reflect the initial stages of alteration under serpentinization conditions. Results from this study show that the alteration of Cr-spinels is dependent on temperature. The degree and extent of alteration (formation of Fe2+-rich and/or ferrian chromite) are controlled by the redox nature of the fluids, the Cr-spinel/silicate and the fluid/rock ratios.
ISSN: 0930-0708

hal-01172266
https://hal.archives-ouvertes.fr/hal-01172266
DOI : 10.1007/s00710-014-0335-5

Éditeur(s) : HAL CCSD European Geosciences Union
Résumé : International audience
We calculated the seismic properties of 47 mantle xenoliths from 9 kimberlitic pipes in the Kaapvaal craton based on their modal composition, the crystal-preferred orientations (CPO) of olivine, ortho- and clinopyroxene, and garnet, the Fe content of olivine, and the pressures and temperatures at which the rocks were equilibrated. These data allow constraining the variation of seismic anisotropy and velocities within the cratonic mantle. The fastest P and S2 wave propagation directions and the polarization of fast split shear waves (S1) are always subparallel to olivine [100] axes of maximum concentration, which marks the lineation (fossil flow direction). Seismic anisotropy is higher for high olivine contents and stronger CPO. Maximum P wave azimuthal anisotropy (AVp) ranges between 2.5 and 10.2% and the maximum S wave polarization anisotropy (AVs), between 2.7 and 8%. Changes in olivine CPO symmetry result in minor variations in the seismic anisotropy patterns, mainly in the apparent isotropy directions for shear wave splitting. Seismic properties averaged over 20 km-thick depth sections are, therefore, very homogeneous. Based on these data, we predict the anisotropy that would be measured by SKS, Rayleigh (SV) and Love (SH) waves for five endmember orientations of the foliation and lineation. Comparison to seismic anisotropy data from the Kaapvaal shows that the coherent fast directions, but low delay times imaged by SKS studies, and the low azimuthal anisotropy with with the horizontally polarized S waves (SH) faster than the vertically polarized S wave (SV) measured using surface waves are best explained by homogeneously dipping (45°) foliations and lineations in the cratonic mantle lithosphere. Laterally or vertically varying foliation and lineation orientations with a dominantly NW-SE trend might also explain the low measured anisotropies, but this model should also result in backazimuthal variability of the SKS splitting data, not reported in the seismological data. The strong compositional heterogeneity of the Kaapvaal peridotite xenoliths results in up to 3% variation in density and in up to 2.3% variation of Vp, Vs, and Vp / Vs ratio. Fe depletion by melt extraction increases Vp and Vs, but decreases the Vp / Vs ratio and density. Orthopyroxene enrichment due to metasomatism decreases the density and Vp, strongly reducing the Vp / Vs ratio. Garnet enrichment, which was also attributed to metasomatism, increases the density, and in a lesser extent Vp and the Vp / Vs ratio. Comparison of density and seismic velocity profiles calculated using the xenoliths' compositions and equilibration conditions to seismological data in the Kaapvaal highlights that (i) the thickness of the craton is underestimated in some seismic studies and reaches at least 180 km, (ii) the deep sheared peridotites represent very local modifications caused and oversampled by kimberlites, and (iii) seismological models probably underestimate the compositional heterogeneity in the Kaapvaal mantle root, which occurs at a scale much smaller than the one that may be sampled seismologically.
ISSN: 1869-9510

hal-01053516
https://hal.archives-ouvertes.fr/hal-01053516
DOI : 10.5194/se-5-45-2014

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Timétrine massif exposed west of the Pan-African suture zone in northeastern Mali belongs to the passive margin of the West African craton facing to the east intra-oceanic arc assemblages and 730 Ma old pre-collisional calc-alkaline plutons. The Timétrine lithologic succession includes from the base to the top Mesoproterozoic cratonic to passive margin formations overlain by deep-sea Fe-Mg schists. Submarine metabasalts and two ultramafic massifs of serpentinized mantle peridotites are inserted as olistoliths towards the top whereas turbidites of continental origin represent the younger unit. Field and petrological data have revealed a distinct metasedimentary sequence attached to the serpentinized peridotites. It essentially consists of impure carbonates, Fe jaspers and polymictic breccias containing altered blocks of mantle peridotites, most rocks being enriched in detrital chromite. This association is interpreted as reworked chemical and detrital sediments derived from the alteration of mafic-ultramafic rocks. It is argued that mantle exhumation above sea floor took place during the Neoproterozoic rifting and crustal thinning period under possible tropical conditions, as suggested by the large volume of silicified serpentinites. In spite of greenschist facies metamorphic overprint characterized by widespread Fe-rich blue amphiboles that are not diagnostic of high-pressure conditions, it is possible to reconstruct a former ocean-continent transition similar to that evidenced for the Mesozoic period, followed by the deposition of syn-to post rift terrigeneous turbidites roughly coeval with ocean spreading some time before 800 Ma. It is concluded that the serpentinite massifs were tectonically emplaced first in an extensional setting, then incorporated within deep-sea sediments as olistoliths and finally transported westward during late Neoproterozoic collisional tectonics onto the West African craton.
ISSN: 0899-5362

hal-00985586
https://hal.archives-ouvertes.fr/hal-00985586
DOI : 10.1016/j.jafrearsci.2013.11.004

Éditeur(s) : HAL CCSD Elsevier
Résumé : Primary arc melts may form through fluxed or adiabatic decompression melting in the mantle wedge, or via a combination of both processes. Major limitations to our understanding of the formation of primary arc melts stem from the fact that most arc lavas are aggregated blends of individual magma batches, further modified by differentiation processes in the sub-arc mantle lithosphere and overlying crust. Primary melt generation is thus masked by these types of second-stage processes. Magma-hosted peridotites sampled as xenoliths in subduction zone magmas are possible remnants of sub-arc mantle and magma generation processes, but are rarely sampled in active arcs. Published studies have emphasised the predominantly harzburgitic lithologies with particularly high modal orthopyroxene in these xenoliths; the former characteristic reflects the refractory nature of these materials consequent to extensive melt depletion of a lherzolitic protolith whereas the latter feature requires additional explanation.Here we present major and minor element data for pristine, mantle-derived, lava-hosted spinel-bearing harzburgite and dunite xenoliths and associated primitive melts from the active Kamchatka and Bismarck arcs. We show that these peridotite suites, and other mantle xenoliths sampled in circum-Pacific arcs, are a distinctive peridotite type not found in other tectonic settings, and are melting residues from hydrous melting of silica-enriched mantle sources. We explore the ability of experimental studies allied with mantle melting parameterisations (pMELTS, Petrolog3) to reproduce the compositions of these arc peridotites, and present a protolith (‘hybrid mantle wedge’) composition that satisfies the available constraints. The composition of peridotite xenoliths recovered from erupted arc magmas plausibly requires their formation initially via interaction of slab-derived components with refractory mantle prior to or during the formation of primary arc melts. The liquid compositions extracted from these hybrid sources are higher in normative quartz and hypersthene (i.e., they have a more silica-saturated character) in comparison with basalts derived from prior melt-depleted asthenospheric mantle beneath ridges. These primary arc melts range from silica-rich picrite to boninite and high-Mg basaltic andesite along a residual spinel harzburgite cotectic. Silica enrichment in the mantle sources of arc-related, subalkaline picrite-boninite-andesite suites coupled with the amount of water and depth of melting, are important for the formation of medium-Fe (‘calc-alkaline’) andesite-dacite-rhyolite suites, key lithologies forming the continental crust.
ISSN: 0016-7037

hal-01553520
https://hal.archives-ouvertes.fr/hal-01553520
DOI : 10.1016/j.gca.2016.09.030

Éditeur(s) : HAL CCSD Geological Society
Résumé : Gem opals from Wegel Tena, Wollo Province, Ethiopia, occur in Oligocene rhyolitic ignimbrites. They display a unique geochemistry, with some samples yielding the highest Ba concentrations ever recorded. They are generally much richer in chemical impurities than opals from other localities. For example, the sum Al+Fe or the sum Na+Mg+Ca+K+Ba are often higher. These geochemical features make them easy to distinguish from other opals worldwide. We observed strong geochemical variations and some good positive correlations in our samples, such as Al+Fe vs. Na+Mg+Ca+K+Ba, Al vs Ca, or Ba vs Ca. This shows that the crystallography of opal has controlled, at least in part, the incorporation of chemical impurities, although opal is not well-crystallized. In addition, the multimodal distributions of several chemical impurities (e.g. U vs Sr, Al vs Ca, Ba vs Ca, etc.) suggest at least two origins of silica: weathering of feldspars and weathering of volcanic glass. In addition, opals from Wegel Tena contain numerous well-preserved microscopic plant fossils. Moreover, their host rock exhibits features typical of pedogenesis (abundant clays, desiccation cracks, and grain size sorting). We propose that the opals at Wegel Tena formed during the Oligocene period when volcanic emissions stopped for a time long enough to allow weathering of ingimbrites and therefore liberation of silica. This accompanied the formation of soil and development of plant life, and some plants were trapped in opal.
ISSN: 1467-7873

hal-00767555
https://hal.archives-ouvertes.fr/hal-00767555
DOI : 10.1144/1467-7873/10-MINDEP-058

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
A reactive percolation experiment was conducted by injecting seawater into a permeable olivine aggregate at 190 °C and 19 MPa to explore the relationships between hydration reactions and hydrodynamic properties during the onset of serpentinization in the ultramafic lithosphere exposed at mid-ocean ridges. The experiment was stopped after 23 days when the sample became impermeable. The initial flow rate was 0.2 mL/h and then was decreased down to 0.06 mL/h after 8 days. Permeability decreased continuously throughout the experiment. The analyses of fluid chemistry time series and of the mineralogy and structure of the reacted sample showed olivine dissolution and precipitation of proto-serpentine, brucite and Fe-oxides. These reactions are controlled by coupled hydrodynamic and chemical processes interacting at different time and spatial scales. Their first characteristic is the production of silica rich outlet fluids in disequilibrium with the observed reacted mineral assemblages. These compositions are interpreted as resulting from a suite of coupled dissolution-precipitation reactions, controlled at the pore scale by surface kinetic processes, that rapidly reaches steady-state (constant fluid composition independent of fluid flux). Hence, the effective rate of serpentinization was controlled, to the first order, by the transport of reactants during the experiment. Mass balance calculations show that the rate of olivine conversion was fast (0.2-0.5 wt%/day), yet only ∼8 wt% of the olivine sample reacted, because the permeability drop limited fluid circulation. Porosity varied little during the experiment compared to permeability changes: the decrease of permeability was explained by the structure of the newly formed serpentine favouring the clogging of fluid paths. The rate at which permeability decreased was the fastest at low flux conditions. This suggests that permeability changes were not controlled simply by the kinetics of the serpentinization reactions, but mainly reflected the development of low Peclet pore scale zones forming micro-environments that control the serpentinization reaction-paths. These results outline the need to take into account the coupling of hydrodynamic and chemical processes when modelling the effects of reactive transport within the hydrating oceanic lithosphere.
ISSN: 0012-821X

hal-00855043
https://hal.archives-ouvertes.fr/hal-00855043
DOI : 10.1016/j.epsl.2013.03.052

Éditeur(s) : Elsevier
Résumé : The combined use of Lu-Hf and Sm-Nd isotope systems potentially offers a unique perspective for investigating continental erosion, but little is known about whether, and to what extent, the Hf-Nd isotope composition of sediments is related to silicate weathering intensity. In this study, Hf and Nd elemental and isotope data are reported for marine muds, leached Fe-oxide fractions and zircon-rich turbidite sands collected off the Congo River mouth, and from other parts of the SE Atlantic Ocean. All studied samples from the Congo fan (muds, Fe-hydroxides, sands) exhibit indistinguishable Nd isotopic composition (epsilon(Nd)similar to - 16), indicating that Fe-hydroxides leached from these sediments correspond to continental oxides precipitated within the Congo basin. In marked contrast, Hf isotope compositions for the same samples exhibit significant variations. Leached Fe-hydroxide fractions are characterized by epsilon(Hf) values (from -1.1 to +13) far more radiogenic than associated sediments (from -7.1 to -12.0) and turbidite sands (from -27.2 to -31.6). epsilon(Hf) values for Congo fan sediments correlate very well with Al/K (i.e. a well-known index for the intensity of chemical weathering in Central Africa). Taken together, these results indicate that (1) silicate weathering on continents leads to erosion products having very distinctive Hf isotope signatures, and (2) a direct relationship exists between epsilon(Hf) of secondary clay minerals and chemical weathering intensity. These results combined with data from the literature have global implications for understanding the Hf-Nd isotope variability in marine precipitates and sediments. Leached Fe-hydroxides from Congo fan sediments plot remarkably well on an extension of the 'seawater array' (i.e. the correlation defined by deep-sea Fe-Mn precipitates), providing additional support to the suggestion that the ocean Hf budget is dominated by continental inputs. Fine-grained sediments define a diffuse trend, between that for igneous rocks and the,seawater array', which we refer to as the 'zircon-free sediment array' (epsilon(Hf)=0-91 epsilon(Nd)+3.10). Finally, we show that the Hf-Nd arrays for seawater, unweathered igneous rocks, zircon-free and zircon-bearing sediments (epsilon(Hf)= 1.80 epsilon(Nd)+2.35) can all be reconciled, using Monte Carlo simulations, with a simple weathering model of the continental crust. (C) 2008 Elsevier B.V. All rights reserved.
Earth and Planetary Science Letters (0012-821X) (Elsevier), 2009 , Vol. 277 , N. 3-4 , P. 318-326

Droits : 2009 Elsevier B.V. All rights reserved.
http://archimer.ifremer.fr/doc/2009/publication-6451.pdf
DOI:10.1016/j.epsl.2008.10.028
http://archimer.ifremer.fr/doc/00000/6451/

Éditeur(s) : MDPI AG
Résumé : In mangrove ecosystems, strong reciprocal interactions exist between plant and substrate. Under semi-arid climate, Rhizophora spp. are usually predominant, colonizing the seashore, and Avicennia marina develops at the edge of salt-flats, which is the highest zone in the intertidal range. Along this zonation, distribution and speciation of C, Fe, S, N, and P in sediments and pore-waters were investigated. From the land-side to the sea-side of the mangrove, sediments were characterized by I/ increase in: (i) water content; (ii) TOC; (iii) mangrove-derived OM; II/ and decrease in: (i) salinity; (ii) redox; (iii) pH; (iv) solid Fe and solid P. Beneath Avicennia and Rhizophora, TS accumulated at depth, probably as a result of reduction of iron oxides and sulfate. The loss of total Fe observed towards the sea-side may be related to sulfur oxidation and to more intense tidal flushing of dissolved components. Except the organic forms, dissolved N and P concentrations were very low beneath Avicennia and Rhizophora stands, probably as a result of their uptake by the root systems. However, in the unvegetated salt-flat, NH4+ can accumulate in organic rich and anoxic layers. This study shows: (i) the evolution of mangrove sediment biogeochemistry along the intertidal zone as a result of the different duration of tidal inundation and organic enrichment; and (ii) the strong links between the distribution and speciation of the different elements.
Journal of Marine Science and Engineering (2077-1312) (MDPI AG), 2015-02-10 , Vol. 3 , N. 1 , P. 52-72

Droits : 2015 by the authors; licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution license (http://creativecommons.org/licenses/by/4.0/).
http://archimer.ifremer.fr/doc/00251/36252/34802.pdf
DOI:10.3390/jmse3010052
http://archimer.ifremer.fr/doc/00251/36252/

Éditeur(s) : HAL CCSD Society of Economic Geologists
Résumé : International audience
The ~8-Moz Sadiola Hill gold deposit is located in the Kédougou-Kénieba inlier, a window of deformed ca. 2200 to 2050 Ma rocks that crop out in eastern Senegal and western Mali. The geology of the inlier differs from other Paleoproterozoic granite-greenstone belts and sedimentary basins by the abundance of carbonate rocks. The Sadiola Hill gold deposit occurs within 3 km of the Senegal-Mali shear zone, and country rocks in the region have undergone polycyclic deformation. The lithostratigraphy of the open pit consists of impure limestones overlain by younger sequences of detrital sedimentary rocks, which include arenite, wacke, and siltstone. The sedimentary rocks have been subjected to regional greenschist-facies metamorphism and have been intruded by multiple generations of synkinematic, calc-alkaline stocks and dikes. The bulk of the ore is hosted within a N-S- to NNW-trending, 10- to 50-m-wide, brittle-ductile dilational shear zone defined as the Sadiola shear zone. Gold lodes also occur along an array of steep NNE-trending shear zones. Geometric and kinematic analyses indicate that the ore-hosting structures were undergoing sinistral displacement at the time of mineralization, locally defined as the D3s NNW-SSE-shortening event. Hydrothermal alteration is polyphase and includes an early high-temperature calc-silicate phase (i.e., porphyroblastic growth of actinolite-tremolite) followed by a potassic phase (i.e., biotite-calcite-quartz ± K-feldspar-tourmaline-actinolite) that was synchronous with ore mineral deposition. Paragenetic studies reveal a multistage ore development that includes an As-rich sulfide stage, followed by an Au-Sb stage. The ore is associated with a metal enrichment suite of Au-As-Sb ± Cu-Fe-W-Mo-Ag-Bi-Zn-Pb-Te. The Sadiola Hill deposit shares a similar relative timing and structural setting to that of other world-class orogenic gold systems in the West African craton (e.g., Ashanti, Loulo), with gold deposition occurring during a period of transcurrent tectonics, after the cessation of region-wide compressional deformation. The high-temperature paragenesis at Sadiola Hill is atypical of gold mineralization in the craton and indicates that the late Eburnean tectono-magmatic activity between ca. 2080 and 2060 Ma played an important role in the dynamics of hydrothermal fluid circulation along the Senegal-Mali shear zone.
ISSN: 0361-0128

hal-01583358
https://hal.archives-ouvertes.fr/hal-01583358
DOI : 10.2113/econgeo.112.1.23

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Cold seeps, located on sea floors and frequently fueled with methane, have been much studied for the formation of carbonate nodules, crusts or masses resulting from the activity og communities of anaerobic bacteria. In this paper, we examine the impact of cold seepage on their caging sediments, as far as their geochemical composition and microfaunal content are concerned. To this end, two fossil cold seeps of the Jurassic Beauvoisin site (Vocontian Trough, SE-France) are studied, focusing on the redox-sensitive and/or sulfide-forming trace metals. We observe that: 1) the carbonate edifices of the cold seeps are enriched in specific elements, namely, Sr, Mo As and Sb, compared to their caging marlstones, and 2) the benthic foraminifer populations were present close to the edifices. The Sr enrichment is ascribed to a contamination of the seeping fluids at the contact with underlying evaporites; the Mo-As-Sb enrichment may have several, non-exclusive, origins. We retain two scenarios; in the first one, the enrichment is due to the ascending fluids that could collect these elements when passing through thick shaly formations; in the second scenario, Mo, As and Sb were supplied to the sites of carbonate precipitation together with Fe- and Mn-oxy-hydroxides (the so-called particulate shuttle process). We favor the second scenario (possibly coupled to the first one) because the rather uncommon Mo-As-Sb association is also observed for reducing sediments deposited under the influence of Fe-Mn-shuttling.
ISSN: 0009-2541

hal-00806655
https://hal.archives-ouvertes.fr/hal-00806655
DOI : 10.1016/j.chemgeo.2012.12.012

Éditeur(s) : Elsevier Science Bv
Résumé : Climatic and anthropogenic changes are able to engender modifications in the aerosol composition at different geographical and temporal scales The present study addresses this question for the trace metal concentrations (TM = Al, Fe, Mn, Co, Ni, Cu, Pb, Cd and Zn) of aerosol from the North-western Mediterranean coast of France (Cap Ferrat, nearby Nice) between 1986 and 2008. From seasonal variations (2006-08) and decadal trends (1986-2008) of TM concentrations. three groups of elements can be distinguished They consist of different aerosol sources: crustal-derived elements (Al, Fe. Mn and Co), trace metals of anthropogenic origin (Pb, Cd and Zn) and a third, intermediate, group of trace metals that presented both anthropogenic and natural/crustal influences (Ni and Cu). Reproducible seasonal patterns were observed for crustal and intermediate elements with highest concentrations between May and November. while anthropogenic trace metals did not show a pronounced seasonal cycle Nevertheless, highest concentrations of anthropogenic trace metals occurred mostly in autumn/winter. Aerosol concentrations of anthropogenic TMs decreased remarkably over the last two decades, while crustal trace metals did not show any evolution Nickel and copper aerosol concentrations remained constant, as well. Lead concentrations decreased from 1986 (29.34 ng m(-3)) to 2008 (3.33 ng m(-3)). overall by 90%. Cadmium and zinc aerosol concentrations decreased by 66 and 54%, respectively, between 1998 and 2006-08. from 0.27 to 0.09 ng m(-3) and from 23.9 to 10.9 ng m(-3). respectively. These findings demonstrate the response of the atmospheric environment to the implementation of antipollution policies Possible changes of trace metal emissions sources and local influences are discussed (C) 2010 Elsevier B V. All rights reserved.
Science Of The Total Environment (0048-9697) (Elsevier Science Bv), 2010-06 , Vol. 408 , N. 13 , P. 2629-2638

Droits : 2010 Elsevier B.V. All rights reserved.
http://archimer.ifremer.fr/doc/00006/11688/8503.pdf
DOI:10.1016/j.scitotenv.2010.02.042
http://archimer.ifremer.fr/doc/00006/11688/

Éditeur(s) : HAL CCSD Wiley
Résumé : International audience
Digestive tubules of Strombidae are composed by three cell types: digestive cells, vacuolated cells, and crypt cells. The last one is characterized by the presence of intracellular granules identified as spherocrystals. Such structures are known to occur in basophilic cells of gastropod digestive gland, where they are supposed to be involved in the regulation of some minerals and in detoxification. In this study, energy-dispersive X-ray analysis (EDX) and energy filtered transmission electron microscopy (EFTEM) were used to determine the elemental content of spherocrystals in two Strombidae, Strombus gigas and Strombus pugilis. In freshly collected individuals of both species, the following elements were detected: Ca, Fe, Mg, P, and Zn. Aluminum and Mn were also detected in S. gigas. Their presence in spherocrystals indicates that, in Strombidae, spherocrystals are involved in the regulation of minerals and essential trace metals. In order to answer the question ''are spherocrystals involved in nonessential trace metals scavenging?,'' artificial cadmium and lead exposure by both waterborne and dietary pathways was applied to S. pugilis. No evidence of cadmium (Cd(NO3)2) or lead (Pb(NO3)2) provided by food was found in spherocrystals. Cadmium provided in water (Cd(NO3)2 and CdCl2) causes structural modifications of the digestive gland; however, this element was not trapped in spherocrystals. These results suggest that spherocrystals are not involved in detoxification of such nonessential trace metals.
ISSN: 1059-910X

hal-00743762
https://hal.univ-antilles.fr/hal-00743762
DOI : 10.1002/jemt.21073

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
We determine the elasticity of FeSiO3 perovskite for various spin configurations using density-functional theory calculations. The elastic moduli and the bulk seismic wave velocities are weakly affected by the spin transition. However we show that the intrinsic differences in seismic anisotropy between the high-spin and low-spin phases of Fe-bearing perovskite coupled with lattice preferred orientation that can develop due and during the convection may lead to distinct seismic signatures between the top and the bottom of the lower mantle. These signatures should be detectable in observations and they need to be taken into account in tomographic studies of the Earth's lower mantle.
ISSN: 0094-8276

hal-00512662
https://hal.archives-ouvertes.fr/hal-00512662
DOI : 10.1029/2010GL043320

Éditeur(s) : Université des Antilles Études caribéennes
Résumé : En Haïti, rien ne semble être planifié et pensé sur le long terme, raison sans doute pour laquelle l’entrepreneuriat ne joue pas un rôle prépondérant dans le développement de l’économie du pays (Financial Times, 2015). Cette vision sur le court terme qui est celle de la majorité de la population -à savoir les pauvres- n’est cependant pas une vérité absolue puisque le groupe largement minoritaire de la population, les riches ou encore l’élite économique, compte des entrepreneurs au sens des pays riches, c'est-à-dire des personnes ayant une vision de l’entreprise sur le long terme avec pour perspective la croissance de l’entreprise et l’enrichissement personnel, parfois « saupoudré » ,ici et là, d’une touche sociale par rapport à la montée en puissance du phénomène Responsabilité Sociale des Entreprises (RSE). Ce numéro spécial sur l’entrepreneuriat en Haïti se veut force de propositions (pratiques) pour que l’entrepreneuriat ait droit de cité comme force motrice du développement d’Haïti. Si comme le dit l’entrepreneur Jerry Tardieu : investir et s’investir en Haïti est un acte de foi, que faire pour faire pour que l’entrepreneuriat soit un moteur de développement durable en Haïti ? Telle est la question centrale de ce numéro spécial. L’entrepreneuriat en Haïti a longtemps été marqué – notamment dans la partie formelle – par la dominance du commerce opéré pour une large part par des immigrés moyen-orientaux (Syriens, Libanais, etc.) et de grandes entreprises étatiques. L’économie haïtienne a entamé depuis les trois dernières décennies un élargissement de son entrepreneuriat à travers la privatisation des monopoles d’Etat et, récemment, se précise l’engouement des jeunes pour la création d’entreprises. Si pour certains analystes comme Lundahl (2010), l’entrepreneuriat communautaire a échoué en Haïti, il n’en demeure pas moins que la micro finance a connu un développement tel, qu’elle a démocratisé l’accès au financement et permis le développement d’une multitude de micro-entreprises (Paul, Daméus & Garrabé, 2011). In Haiti, nothing seems to be planned in advance. Everything seems to happen by chance, hence the reason why entrepreneurship is a heavy weight in the GDP of the country (Financial Times, 2015). This non strategic and short term vision of entrepreneurship in Haiti is peculiar to the vast majority of the population, that is to say the poor. However, this does not happen across the board as the rich (the minority of population) also called the ‘elite’ have a perception of entrepreneurship similar to developed countries where entrepreneurship is seen as a long term strategy with so called Corporate Social Responsibilities (CSR). This special issue about Haiti is to find practical solutions to ensure that entrepreneurship can play a major role in the economic development of the country. Jerry Tardieu, a Haitian entrepreneur, claimed that investing in Haiti is a proof of faith in the country’s potential. What can be done to turn entrepreneurship into a sustainable tool for the development of Haiti? This is the central research question of this special issue. For a while, leading entrepreneurs in Haiti were from the Middle East (Syria, Liban, etc) and public companies. However, over the last three years, entrepreneurs in Haiti have come from different backgrounds. Also, more and more young people are getting into entrepreneurship and many public companies have been privatised. Despite the fact that for some analyst’s entrepreneurship in Haiti has totally failed (Lundahl, 2010), the development of micro finance over the last few years has democratized access to funding, enabling development of a multitude of micro-enterprises (Paul & Dameus Garrabé, 2011) (Paul, Daméus & Garrabé, 2011). En Haití, nada parece estar planificado y pensado en el largo plazo, probablemente es la razón por la cual la iniciativa empresarial no está jugando un papel importante en el desarrollo de la economía (Financial Times, 2015). Esta visión a corto plazo es el de la mayoría de la población. Sin embargo, no es una verdad absoluta ya que el grupo de población en gran minoría, los ricos o la élite económica, los empresarios responsables de los efectos de los países ricos es decir, las personas con una visión de negocio a largo plazo con la perspectiva del crecimiento de la empresa y de enriquecimiento personal, aunque a veces 'salpicado aquí y allá de un toque social, en comparación con el aumento del fenómeno de la Responsabilidad Social Corporativa (RSC). Este número especial sobre el emprendimiento en Haití quiere suscitar propuestas (prácticas) para que la iniciativa empresarial llega a ser citada como una fuerza impulsora en el desarrollo de Haití. Si, como lo dice el empresario Jerry Tardieu, invertirse e invertir en Haití es un acto de fe, ¿que hacer para que el espíritu empresarial sea un motor para el desarrollo sostenible en Haití? Esta es la pregunta central de este número especial. Emprendimiento en Haití durante mucho tiempo ha sido etiquetado - sobre todo en la parte formal - por el predominio del comercio operado en gran parte por inmigrantes de Oriente Medio (Siria, Líbano, etc.) y las grandes empresas estatales. La economía haitiana ha comenzado las últimas tres décadas la expansión de la iniciativa empresarial a través de su privatización de los monopolios estatales y, desde hace poco, la moda de los jóvenes emprendedores. Aunque segun algunos analistas como Lundahl (2010), el emprendimiento comunitario no sucede Haití, el hecho es que las microfinanzas ha experimentado un desarrollo tal, se ha democratizado el acceso a la financiación, como permite el desarrollo de una multitud de microempresas (Paul & Dameus Garrabé, 2011).

Droits : info:eu-repo/semantics/openAccess
urn:doi:10.4000/etudescaribeennes.9541
http://journals.openedition.org/etudescaribeennes/9541

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Urucum region (Mato Grosso do Sul, Brazil) contains Neoproterozoic–Cambrian manganese ore in the layers Mn-1, Mn-2, and Mn-3, which are interbedded with iron formations (IFs) from the Santa Cruz Formation (Jacadigo Group) and surrounded by carbonate rocks from the Bocaina and Tamengo Formations (Corumbá Group). These rocks fill an ancient graben, with sediments from the Santa Cruz Formation overlying fluvial deposits from the Urucum Formation and limestones from the Bocaina and Tamengo Formations deposited in the shallow marginal regions. As the graben deepened, it was flooded with microbe-rich seawater and hydrothermalism began. Iron and manganese precipitated within the pores in arkosic sandstones, thereby forming the clastic Lower Mn-1 ore layer. The remaining manganese was simultaneously deposited on the basin floor with clastic clay and silt from turbidity currents, thereby forming the Upper Mn-1 clastic–chemical ore layer. The sedimentation of Mn-1 and its host IFs was controlled by seawater saturation and homogeneous oxidation, which caused manganese and iron sedimentation and the death of microorganisms, generating mangano-ferriferous sediments with high P, Co and Ni contents. Mn-2 formed during periods of tectonic quiescence through water influxes that carried abundant microbes, Fe(II), Mn(II), and SiO2. Under UV radiation, these microbes oxidized Mn(II) and Fe(II) to form hydroxides and died, thereby forming biomass that was enriched in P, Co and Ni and minor carbonate adjacent to and below the oxycline. These microbes also formed kremydilites, oblate structures that resemble manganese stromatolites, within the biomass and produced CH4 and/or H2 gas bubbles. During early diagenesis, wormlike organisms inhabited the biomass and probably separated iron from manganese to produce cryptomelane microbialites, which agglutinated to form manganese micronodules that coalesced to form the massive layer Mn-2. This process ended with the disappearance of microorganisms and the sedimentation of the IFs, and a new water influx generated layer Mn-3 via the same process. The final seawater upwelling precipitated IFs in the basin depocenter, whereas limestone from the Tamengo Formation was deposited along the basin’s edges. The diagenesis initially transformed the manganese oxides into cryptomelane and then into hollandite.
ISSN: 0169-1368

hal-01684668
https://hal.archives-ouvertes.fr/hal-01684668
DOI : 10.1016/j.oregeorev.2017.09.018

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We studied the deformation in a partially molten mantle through detailed petrostructural analysis of plagioclase lherzolites from the northwestern part of the central Lanzo massif. These peridotites display a pervasive anastomosed network of millimetre to centimetre-scale plagioclase-rich bands, which grades locally into a planar layering marked by an intercalation of plagioclase-rich and olivine-rich layers up to tens of centimetres wide. Both the anastomosed and the planar layering are subparallel to the deformation fabric, characterized by a foliation defined by the shape-preferred orientation of olivine and by crystal preferred orientation (CPO) of olivine, orthopyroxene, and clinopyroxene. This parallelism, the coexistence of microstructural evidence for melt-rock reactions and for deformation by dislocation creep, and the predominance of axial-[010] olivine CPO patterns, characterized by [010] axes clustered normal to the layering, indicate that deformation and the reactive melt percolation that formed the layering were coeval. Strong heterogeneity in mineral composition in the planar layering domains, with Fe-enrichment in olivine and spinel and highly variable Ti content in spinel in cm-scale plagioclase-rich bands, implies that the latter interacted with higher melt volumes. High Ti contents in pyroxenes and spinel in the anastomosed layering domains point to changes in melt composition, hinting to less effective melt transport. We propose therefore that the planar layering records melt segregation in layers parallel to the shear plane, whereas the anastomosed layering results from melt alignment along grain boundaries subparallel to the shear plane, without segregation. Finite strain in the different layers cannot be quantified, but comparison of the present observations with data from experiments and from other mantle outcrops displaying shear-controlled melt organization suggests that the transition from the anastomosed to the planar layering might record an increase in finite strain, that is, strain localization associated with variations in the instantaneous melt fraction.
ISSN: 0040-1951

hal-01053509
https://hal.archives-ouvertes.fr/hal-01053509
DOI : 10.1016/j.tecto.2014.01.007

Éditeur(s) : HAL CCSD Springer Verlag (Germany) Springer Verlag
Résumé : International audience
We have investigated the partitioning of Fe3+ between orthopyroxene (Opx) and garnet (Grt) in well-equilibrated mantle xenoliths using Mössbauer spectroscopy. The samples cover a wide range of P–T conditions (2.1–6.6 GPa, 690–1,412 °C) and geothermal gradients, and are thus representative for Earth’s upper mantle in both on-craton and off-craton continental settings. Garnet has Fe3+/Fetot ratios of 0.03–0.13 and Fe2O3 contents of 0.24–1.00 wt%. Orthopyroxene has, on average, lower Fe3+/Fetot ratios (0.01–0.09) and Fe2O3 contents (0.05–0.63 wt%). In low-pressure, high-temperature samples, however, Opx is systematically richer in Fe2O3 than the coexisting Grt. The Fe3+ Opx/Grt partition coefficient (DOpx/GrtFe3+) shows no obvious relationship with temperature, but increases with decreasing pressure and with increasing NaOpx. The observed Opx/Grt Fe3+ systematics imply that the Opx–Grt Fe–Mg exchange thermometer is not robust against redox changes if total Fe is treated as Fe2+. An approximate evaluation of errors on T estimates due to redox effects predicts negligible deviations for strongly reduced conditions (<65 °C), but potentially large deviations (> to ≫100 °C) for strongly oxidized conditions, especially at very high pressure and when both P and T are calculated by iteration.
ISSN: 0010-7999

hal-01121606
https://hal.archives-ouvertes.fr/hal-01121606
DOI : 10.1007/s00410-014-1101-8

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Underground CO2 sequestration is highly recommended as an effective means of significantly decreasing CO2 concentration in the atmosphere. Mineral storage is the more secure technology, but requires the presence of high concentration of divalent cations in the pore-fluid. Results from CO2 percolation experiments through chlorite/zeolite-rich sandstone samples from the Pretty Hill Formation (Otway Basin, Australia) are presented. The dissolution of the laumontite (7 wt.%) and chamosite (7 wt.%) are the potential sources of calcium, iron and magnesium required for carbonate precipitation. The percolation experiment was setup to reproduce, at laboratory scale, the in situ temperature and pressure conditions (T = 95 degrees C and P = 10 MPa). The fluid injected at constant flow rate is a rock-equilibrated brine subsequently enriched in CO2 up to partial pressure of 6 MPa. We observe feldspars, laumontite and chamosite dissolution, kaolinite and silica precipitation and a noticeable sink of CO2 in the sample which is attributed to the precipitation of both amorphous carbon due to the reduction of CO2 and Fe-rich carbonate. Permeability decreases of about one order of magnitude due to the localization of the kaolinite precipitation in the main flow paths, while porosity increases. The high reactivity of this sandstone makes this reservoir a valuable target for CO2 mineralization, but the associated permeability decrease may limit the injection rate and the spreading of the CO2 in the reservoir.
ISSN: 0009-2541

hal-00712829
https://hal.archives-ouvertes.fr/hal-00712829
DOI : 10.1016/j.chemgeo.2011.11.018

Éditeur(s) : HAL CCSD IOP Publishing
Résumé : We present the results of an inter-laboratory comparison of EPMA analysis at low voltage (5-6 kV) of three monophasic alloy steel samples. The aim of the work was to obtain an estimate of the present situation of low-voltage analysis of steel and identify needs for improvement. EPMA analyses of the samples were conducted by seven participant groups using electron microprobes and scanning electron microscopes of different kind, equipped with wavelength- and/or energy-dispersive X-ray spectrometers, and employing their own methodology of analysis. The results using WDS showed essentially an underestimation of the Cr contents, with relative deviations from the reference values ranging from -0.7 % to -17 %, and an overestimation of Fe and Ni, with relative deviations from the reference composition ranging from -4 % to +30 %, and from +14 % to +42 %, respectively. The relative deviations obtained by using EDS showed larger scatter, ranging from -16 % to +54 % for Cr, -0.4 % to +66 % for Fe and from +13 % to +90 % for Ni. Reasons for the differences observed and the scatter of results are discussed.
ISSN: 1757-8981

hal-00813999
https://hal.archives-ouvertes.fr/hal-00813999
DOI : 10.1088/1757-899X/32/1/012014