Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
This article is devoted to the presentation of a multilevel method using finite differences that is well adapted for solving Stokes and Navier-Stokes problems in primitive variables. We use Uzawa type algorithms to solve the saddle point problems arising from spatial discretization by staggered grids and a semi-explicit temporal scheme. By means of a new change of basis operator, the two-dimensional velocity and pressure fields of an M.A.C mesh are gathered in a hierarchical order, into several grids preserving the M.A.C property on each of them. These new hierarchical unknowns, called Staggered Incremental Unknowns (SIU), allow us to develop techniques which reduce the cost of the resolution of either Stokes or generalized Stokes problems. An experimental estimation of the condition number of the inner matrix is given, and justifies the preconditioning effect of the staggered incremental unknowns.
ISSN: 0168-9274

hal-00770268
https://hal.univ-antilles.fr/hal-00770268
DOI : 10.1016/S0168-9274(99)00044-6

Éditeur(s) : Elsevier Science Bv
Résumé : Underwater video techniques are increasingly used in marine ecology studies. Technological progress regarding video cameras, sensors (such as sounders), battery life and information storage make these techniques now accessible to a majority of users. However, diver-based underwater visual censuses, and catch and effort data, remain the most commonly used for observing coastal biodiversity and species. In this paper, we review the underwater video techniques that have been developed since the 1950s to investigate and/or monitor coastal biodiversity. Techniques such as remote underwater video, whether baited or not, diver-operated video and towed video are described, along with corresponding applications in the field. We then analyse the complementary of techniques, first from studies comparing video techniques with other observation techniques, whether video-based or not, and second by documenting their respective cost efficiencies. These findings are discussed with respect to current challenges in monitoring and investigating coastal biodiversity. Video should be more often considered and used, either in addition to or as an alternative to diver-based, fishing and acoustic techniques, as it may be particularly suited for monitoring coastal biodiversity in a variety of areas and on larger scales than hitherto and within an ecosystem-based approach to management and conservation.
Fisheries Research (0165-7836) (Elsevier Science Bv), 2014-06 , Vol. 154 , P. 44-62

Droits : 2014 Elsevier B.V. All rights reserved.
http://archimer.ifremer.fr/doc/00181/29274/27901.pdf
DOI:10.1016/j.fishres.2014.01.019
http://archimer.ifremer.fr/doc/00181/29274/

Éditeur(s) : HAL CCSD De Gruyter
Résumé : COST Action E35 : Fracture mechanics and micromechanics of wood and wood composites with regard to wood machining
The data available in the literature concerning wood cutting forces permits to build models or to simulate the main wood machining processes ( milling, sawing, peeling, etc.). This approach contributes to a better understanding of formation of wood surfaces and chips and the data may be helpful to optimise cutting geometry, reduce tool wear, improve tool material, and to size tool-machines. The models may also be useful for industrial application in two ways: ( 1) providing data to optimise the settings for a given operation ( batch approach), and ( 2) building predictive models that could be the basis of an online control system for the machining processes ( interactive approach). A prerequisite for this is that numerous machining tests on different wood materials are performed based on experiences with different kind of tools and experimental devices. With a focus on potential industrial applications, the emphasis of this review was on the wood peeling process, which is a very demanding special case of wood cutting. Although not so many industrial machines are equipped with expensive force sensors, there is a lot of high quality information available about cutting forces which may be useful to improve the scientific or technological knowledge in wood machining. Alternative parameters, such as vibration or sound measurements, appear to be promising substitutes in the praxis, particularly to feed online control systems of any wood cutting process.
ISSN: 0018-3830

hal-01032121
https://hal.archives-ouvertes.fr/hal-01032121
DOI : 10.1515/HF.2009.014

Éditeur(s) : HAL CCSD Wiley-Blackwell
Résumé :  
Cross-species analyses of plant functional traits have shed light on factors contributing to differences in performance and distribution, but to date most studies have focused on either leaves or stems. We extend these tissue-specific analyses of functional strategy towards a whole-plant approach by integrating data on functional traits for 13 448 leaves and wood tissues from 4672 trees representing 668 species of Neotropical trees. Strong correlations amongst traits previously defined as the leaf economics spectrum reflect a tradeoff between investments in productive leaves with rapid turnover vs. costly physical leaf structure with a long revenue stream. A second axis of variation, the 'stem economics spectrum', defines a similar tradeoff at the stem level: dense wood vs. high wood water content and thick bark. Most importantly, these two axes are orthogonal, suggesting that tradeoffs operate independently at the leaf and at the stem levels. By simplifying the multivariate ecological strategies of tropical trees into positions along these two spectra, our results provide a basis to improve global vegetation models predicting responses of tropical forests to global change.
Ecology Letters

hal-01032142
https://hal.archives-ouvertes.fr/hal-01032142
DOI : 10.1111/j.1461-0248.2010.01517.x

Éditeur(s) : Université des Antilles Études caribéennes
Résumé : Cet article analyse les déterminants de la disposition des managers à formaliser les PME informelles en Côte d’Ivoire. Les données utilisées portent sur 400 entreprises du secteur informel enquêtées dans le cadre du projet CAPEC/CRDI. À partir des statistiques descriptives et de l’estimation d’un modèle Probit, l’étude met en évidence d’une part les variables qui influencent négativement et d’autre part celles qui influencent positivement la disposition à formaliser les PME. Il ressort de ces enquêtes que les taxes, le fait que l’entreprise soit dirigée par une femme, les coûts d’enregistrement, l’affiliation à une organisation politique et l’ignorance des procédures ont un effet négatif sur la disposition des managers à formaliser leurs entreprises. Les résultats montrent que la possession d’un plan d’affaires à la création, l’expérience du manager, la localisation, le niveau d’instruction supérieur, la simplification des procédures d’enregistrement affectent positivement la propension à formaliser les PME informelles. De même, les problèmes d’accès au financement et aux marchés publics conduisent les managers à la formalisation de leurs entreprises. Au regard de ces déterminants, la réduction des coûts de la formalisation, un meilleur accès des PME qui se formalisent au financement et aux marchés publics, le renforcement des capacités des opérateurs de l’informel, l’instauration d’une fiscalité incitative et la vulgarisation des procédures de déclaration s’avèrent des leviers importants de la formalisation.
This paper analyzes the determinants of the willingness of managers to formalize informal SMEs in Côte d'Ivoire. The data used relate to 400 informal sector enterprises surveyed under the CAPEC / IDRC project. On the basis of descriptive statistics and the estimation of a Probit model, the study highlights both variables that negatively influence and those that positively influence the willingness to formalize SMEs. These surveys show that taxes, the fact that the company is headed by a woman, registration costs, affiliation to a political organization and ignorance of procedures have a negative effect on the formalization of businesses.Moreover, the results show that ownership of a business plan at creation, managerial experience, location, higher education, simplification of registration procedures positively affect the propensity to formalize informal SMEs. Similarly, the problems of access to finance and public procurement lead to more formalization. In view of these determinants, the reduction in the costs of formalization, better access by SMEs to financing and public procurement, capacity building for informal operators, the introduction of tax incentives and the Dissemination procedures are important levers of formalization.
Côte d’Ivoire

Droits : info:eu-repo/semantics/openAccess
urn:doi:10.4000/etudescaribeennes.10358
http://journals.openedition.org/etudescaribeennes/10358

Éditeur(s) : HAL CCSD MDPI
Résumé : International audience
AbstractThis review provides a global overview of microporous silica based membranes for desalination via pervaporation with a focus on membrane synthesis and processing, transport mechanisms and current state of the art membrane performance. Most importantly, the recent development and novel concepts for improving the hydro-stability and separating performance of silica membranes for desalination are critically examined. Research into silica based membranes for desalination has focussed on three primary methods for improving the hydro-stability. These include incorporating carbon templates into the microporous silica both as surfactants and hybrid organic-inorganic structures and incorporation of metal oxide nanoparticles into the silica matrix. The literature examined identified that only metal oxide silica membranes have demonstrated high salt rejections under a variety of feed concentrations, reasonable fluxes and unaltered performance over long-term operation. As this is an embryonic field of research several target areas for researchers were discussed including further improvement of the membrane materials, but also regarding the necessity of integrating waste or solar heat sources into the final process design to ensure cost competitiveness with conventional reverse osmosis processes. © 2012 by the authors.
ISSN: 2073-4441

hal-01683200
https://hal.univ-antilles.fr/hal-01683200
DOI : 10.3390/w4030629

Résumé : Dans le cas des DOM, singulièrement la Guadeloupe, qui sont à l'aube de l'expérimentation de réformes profondes de politiques économiques, l'élaboration d'un outil de simulation macroéconomique tel qu'un MEGC apparaît naturellement comme une exigence plus que souhaitable. Ce recours à la construction de modèles spécifiques pour les DOM est en parfaite cohérence avec l'une des principales conclusions du rapport d'information diligenté par le Sénat aux lendemains de la crise sociale du début de l'année 2009. Les appels à projet de la Commission europèenne et du Ministère de l'Outre-mer vont justement dans le sens de pallier celte carence puisque la politique économique des RUP de façon générale est conduite à vue sans aucun outil d'investigation ex ante. Nous avons conçu plusieurs modèles. Parmi eux, CloDyn est le premier modèle macroéconomique pour les DOM à vocationopérationnelle. Composée de plus de 2000 équations, ce modèle d'équilibre général calculable tient compte de nombreuses rigidités sur les marchés des biens et services et du travail et se décline sous deux versions: statique et dynamique. Les élasticités ont fait l'objet d'estimations économétriques. Il tient compte de nombreuses spécificités tant au niveau de la fiscalité de ces régions (octroi de mer, taxe sur les carburants, subventions à l'exportation) que du coût des facteurs (exonérations des charges sur les bas salaires, sur rémunératio des fonctionnaires). Il repose sur une formalisation des mécanismes en oeuvre dans ces économies que nous avons appelé le DOM disease pour expliquer les dysfonctionnements persistants sur le plan macroéconomique.
In the case of the French overseas regions, particularly of Guadeloupe, which are just beginning to experiment with economic policies radical reforrns, the development of a macroeconomic simulation tool such as a CGE model appears naturally as a highly desirable requirement. The use of the construction of specifie models for DOM is fully consistent with a major finding of the report commissioned by the Senate in the aftermath of the social crisis of the early 2009. As a malter of facts, the purpose of the calls for project initiated by the European Commission and the Ministry of Overseas is to remedy this deficiency, since the RUP economie policy is generally to conduct no investigation tool ex ante. We designed several models. Among them, CloDyn is the first operational DOM-based macroeconomic rnodel. Composed of more than 2000 equations, this computable general equilibrium model takes into account many rigidities in the markets for goods and services and labor and is available in two versions: static and dynamic. Elasticities have been econometrically estimated. lt rests on many features of both taxation (dock dues, fuel tax, export subsidies) and the cost factors (exemption from charges on low wages, remuneration of civil servants). Il is based on a formalization of the mechanisms at work in these economies we calied the DOM disease to explain the persistent failures in such economies. lt also evaluates the monetary poverty among households with the use of a block of microsimulation model and we allow a profane in GAMS to use this tool and conduct its own analytical work thanks to a user friendly interface.

http://www.theses.fr/2011AGUY0411/document