Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
The structure and dynamic evolution of a mountain belt piedmont are controlled by strong interactions between tectonics, surface processes (erosion, sedimentation), and climate. Studying these couplings relies on detailed geometric and kinematic analysis of morphostructural markers (folds, faults, terraces, alluvial surfaces) and analysis of syntectonic sedimentation. To study quantitatively how these markers form, evolve and record deformation, we developed a new analogue modelling approach using a specific composite granular material. The originality stands in the simultaneous modelling of orogenic deformation mechanisms and erosion-transport-sedimentation processes, but also in the use of techniques allowing quantitative measurement of morphostructural evolution. This methodology opens new perspectives in the fields of geomorphology (relief dynamics), seismotectonics (study of active faults), and sedimentology (including sequential stratigraphy).
ISSN: 0010-7999

hal-00411972
https://hal.archives-ouvertes.fr/hal-00411972
DOI : 10.1016/j.crte.2008.01.005

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Orogenic wedges locally present chaotic tectonostratigraphic units that contain exotic blocks of various size, origin, age and lithology, embedded in a sedimentary matrix. The occurrence of ophiolitic blocks, sometimes huge, in such “mélanges” raises questions on (i) the mechanisms responsible for the incorporation of oceanic basement rocks into an accretionary wedge and (ii) the mechanisms allowing exhumation and redeposition of these exotic elements in “mélanges” during wedge growth.To address these questions, we present the results of a series of analogue experiments performed to characterize the processes and parameters responsible for accretion, exhumation and tectonosedimentary reworking of oceanic basement lithospheric fragments in an accretionary wedge.The experimental setup is designed to simulate the interaction between tectonics, erosion and sedimentation. Different configurations are applied to study the impact of various parameters, such as irregular oceanic floor due to structural inheritance, or the presence of layers with contrasted rheology that can affect deformation partitioning in the wedge (frontal accretion vs basal accretion) influencing its growth. Image correlation technique allows extracting instantaneous velocity field, and tracking of passive particles. By retrieving the particle paths determined from models, the pressure-temperature path of mélange units or elementary blocks can be discussed. The experimental results are then compared with observations from ophiolite-bearing mélanges in Taiwan (Lichi and Kenting mélanges) and Raman spectroscopy of carbonaceous material (RSCM) Thermometry data on rocks from the northern Apennines (Casanova mélange). A geological scenario is proposed following basic observations. The tectonic evolution of the retroside of doubly vergent accretionary wedges is mainly controlled by backthrusting and backfolding. The retro wedge is characterized by steep slopes that are prone to gravitational instabilities. It triggers submarine landslides inducing huge mass transfers. This erosion combined with backthrusting could favour exhumation of the ophiolitic fragments formerly accreted at the base of the wedge along the rough seafloor-sediments interface. Such an exhumed material can be reworked and deposited as debris- flows in proximal basins located at the foot of the retrowedge slope forming a tectono-sedimentary mélange. These syntectonic basins are continuously deformed and involved in prograding backthrusting-induced deformation.
ISSN: 0264-3707

hal-01395127
https://hal.archives-ouvertes.fr/hal-01395127
DOI : 10.1016/j.jog.2016.05.008

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
After Jurassic rifting, numerous carbonate platforms (i.e., the Orizaba, Cordoba and Golden Lane-Tuxpan platforms) developed during the Lower and Middle Cretaceous episode of thermal subsidence along the western passive margin of the Gulf of Mexico, with intervening basinal domains (i.e., the Tampico-Misantla, Zongolica, Veracruz and Deep Gulf of Mexico - DGM - basins).;During the Late Cretaceous-Paleocene, the east-verging Sierra Madre Oriental thrust belt developed, resulting in tectonic uplift and unroofing of the allochthonous units (i.e. tectonic units made up of former Orizaba and Cordoba platforms and Zongolica Basin series). This new topography provided also an important source of clastics to feed the adjacent foredeep, where coeval tectonic loading accounted for the bending of the foreland lithosphere. However, shallow water facies or even emersion persisted until the Eocene in the forebulge area (at the present location of the Golden Lane), preventing locally the clastics to reach the DGM. This topographic barrier was ultimately bypassed by the clastics only during the Oligocene and Neogene, once (1) the prograding clastic wedge had exceeded accommodation, and (2) the long lasting thermal subsidence of the passive margin could overpass the effect of the bending and force the former bulge to sink.;Numerous paleo-thermo-meters (Tmax, Ro), paleo-thermo-barometers (fluid inclusions), PVT and coupled forward kinematic and thermal modeling have been used to calibrate and date the progressive unroofing of the thrust belt. Coupled tectonic and sedimentologic modeling was applied in the foreland to predict the distribution of sand versus shale ratios in the Oligocene to Plio-Quaternary clastic sedimentary wedge of the passive margin, where gravitational gliding of post-Eocene series occurred during the Neogene along major listric faults.;Mantle dynamics are advocated as the main process accounting for post-orogenic uplift and regional tilting of the basement, which initiated a massive transfer of sediments from the Cordillera towards the Gulf of Mexico, from Oligocene onward, resulting in a destabilization and gravitational collapse of the western slope of the Gulf of Mexico in Neogene times.
ISSN: 0040-1951

hal-00445248
https://hal.archives-ouvertes.fr/hal-00445248
DOI : 10.1016/j.tecto.2009.04.012

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Geodetic data support a short-term continental deformation localized in faults bounding lithospheric blocks. Whether major "faults" observed at the surface affect the lithospheric mantle and, if so, how strain is distributed are major issues for understanding the mechanical behavior of lithospheric plates. A variety of evidence, from direct observations of deformed peridotites in orogenic massifs, ophiolites, and mantle xenoliths to seismic reflectors and seismic anisotropy beneath major fault zones, consistently supports prolongation of major faults into the lithospheric mantle. This review highlights that many aspects of the lithospheric mantle deformation remain however poorly understood. Coupling between deformation in frictional faults in the uppermost crust and localized shearing in the ductile crust and mantle is required to explain the post-seismic deformation, but mantle viscosities deduced from geodetic data and extrapolated from laboratory experiments are only reconciled if temperatures in the shallow lithospheric mantle are high (> 800 °C at the Moho). Seismic anisotropy, especially shear wave splitting, provides strong evidence for coherent deformation over domains several tens of km wide in the lithospheric mantle beneath major transcurrent faults. Yet it cannot detect narrow strain localization zones or shallowly dipping faults. Seismic profiling images shallow-dipping seismic reflectors in the lithospheric mantle interpreted as the continuation of normal or, less frequently, inverse faults in the mantle. However the nature of these reflectors is poorly understood. There is a large discrepancy between the scale at which deformation processes are studied (a few kilometers, at most, due to the limited size of continuous mantle exposures at the Earth's surface) and the scale inferred for strain localization in the mantle from geophysical observations (tens of kilometers). Combining data on deformation microstructures and crystal preferred orientations in naturally deformed peridotites and seismologic observations allows nevertheless discussing strain localization processes that may play a role on the development of mantle shear zones.
ISSN: 0040-1951

hal-00750314
https://hal.archives-ouvertes.fr/hal-00750314
DOI : 10.1016/j.tecto.2012.06.006

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
This paper provides a synthesis of current data and interpretations on the crustal structure of the Pyrenean-Cantabrian orogenic belt, and presents new tectonic models for representative transects. The Pyrenean orogeny lasted from Santonian (~84 Ma) to early Miocene times (~20 Ma), and consisted of a spatial and temporal succession of oceanic crust/exhumed mantle subduction, rift inversion and continental collision processes at the Iberia-Eurasia plate boundary. A good coverage by active-source (vertical-incidence and wide-angle reflection) and passive-source (receiver functions) seismic studies, coupled with surface data have led to a reasonable knowledge of the present-day crustal architecture of the Pyrenean-Cantabrian belt, although questions remain. Seismic imaging reveals a persistent structure, from the central Pyrenees to the central Cantabrian Mountains, consisting of a wedge of Eurasian lithosphere indented into the thicker Iberian plate, whose lower crust is detached and plunges northwards into the mantle. For the Pyrenees, a new scheme of relationships between the southern upper crustal thrust sheets and the Axial Zone is here proposed. For the Cantabrian belt, the depth reached by the N-dipping Iberian crust and the structure of the margin are also revised.The common occurrence of lherzolite bodies in the northern Pyrenees and the seismic velocity and potential field record of the Bay of Biscay indicate that the precursor of the Pyrenees was a hyperextended and strongly segmented rift system, where narrow domains of exhumed mantle separated the thinned Iberian and Eurasian continental margins since the Albian-Cenomanian. The exhumed mantle in the Pyrenean rift was largely covered by a Mesozoic sedimentary lid that had locally glided along detachments in Triassic evaporites. Continental margin collision in the Pyrenees was preceded by subduction of the exhumed mantle, accompanied by the pop-up thrust expulsion of the off-scraped sedimentary lid above. To the west, oceanic subduction of the Bay of Biscay under the North Iberian margin is supported by an upper plate thrust wedge, gravity and magnetic anomalies, and 3D inclined sub-crustal reflections. However, discrepancies remain for the location of continent-ocean transitions in the Bay of Biscay and for the extent of oceanic subduction. The plate-kinematic evolution during the Mesozoic, which involves issues as the timing and total amount of opening, as well as the role of strike-slip drift, is also under debate, discrepancies arising from first-order interpretations of the adjacent oceanic magnetic anomaly record.
ISSN: 0040-1951

insu-01683989
https://hal-insu.archives-ouvertes.fr/insu-01683989
https://hal-insu.archives-ouvertes.fr/insu-01683989/document
https://hal-insu.archives-ouvertes.fr/insu-01683989/file/teixell-tectono-2018.pdf
DOI : 10.1016/j.tecto.2018.01.009

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
Coupling between erosion and tectonics is thought to play a determinant role in orogenic evolution. Here, we investigate the interplay in this coupling between the assumed erosion law and the crustal rheology at the margin of a collisional plateau, like the Himalaya of Central Nepal. Lithospheric deformation is calculated over a time scale of 100 kyr by a 2D finite element model that incorporates the rheological layering of the crust and the main features of the convergence across the range. For the upper boundary condition, two surface processes were tested: a linear diffusion model and a 1D1/2 integrative model including fluvial incision along the fluvial network and hillslope erosion by landsliding. Model results and their sensitivity to the chosen combinations of erosion law and crustal properties are discussed in light of the constraining geologic and geomorphologic observations. In contrast with the conclusions of Cattin and Avouac [2000] , where a compliant quartz-rich crustal rheology and diffusion law were required, we combine a composite quartz-diabase rheology for the crust with fluvial incision erosion law to account for erosion and elevation profiles across the Himalaya of Central Nepal. More generally, it is proposed that, because of the interplay between the dominant denudation conditions and the rheology of the crust, both well documented erosion rates and processes can provide significant constraints on crustal properties within an active orogen.
ISSN: 0094-8276

hal-00788697
https://hal.archives-ouvertes.fr/hal-00788697
https://hal.archives-ouvertes.fr/hal-00788697/document
https://hal.archives-ouvertes.fr/hal-00788697/file/godard_et_al.pdf
DOI : 10.1029/2004GL021006

Éditeur(s) : HAL CCSD
Résumé : In SW Yukon – SE Alaska, the boundary between the Pacific and North America plates is characterized by a syntaxis at the transition between the Aleutian subduction to the W and the Fairweather – Queen Charlotte strike-slip faults to the SE. The relative motion is oblique to the main fault structures, and the area is marked by the Yakutat block collision. From the Chugach – Saint Elias mountains in the plate boundary zone (up to 6 000 m high) to the intraplate strike-slip faults, markers of the present-day deformation give information on its partition in the system.During my PhD, I first measure surface deformation using a dense GPS network, deployed up to 500 km inland the North America plate. After precise processing and corrections of transient effects in the area (postseismic and glacial isostatic rebound), a new residual velocity field is produced for the syntaxis area, from which I derive strain rates. Those data allow me to quantify the fault slip rates for Fairweather and southern Denali strike-slip faults, and to characterize a bi-modal deformation pattern: Along the plate boundary, the deformation is localized on large-scale structures (accretionary prism to the W, Fairweather to the E); In the syntaxis area, strain rates are the highest and the GPS data shows a diffuse intraplate deformation, similar to an indentor pattern. The Yakutat block seems to strongly drive the North America plate deformation.This indentor pattern induces strong lateral variations on the large intraplate faults: the Denali – Totschunda – Duke River system. In a second part, I realize a regional geomorphological study to characterize the role and slip rate of those faults. From very high-resolution Digital Elevation Models (~ 1 m), a detailed cartography is done. On the basis of fieldwork observations, I measure offsets of fluvial and glacial markers, which are sampled for dating. A dextral cumulative deformation is highlighted on the northern Denali Fault, where as all southern Denali is marked by vertical deformation. This study allows me to quantify new slip rates for the system Denali – Totschunda – Duke River, and to show the leading role of the Totschunda (~ 14 mm/a) and Duke River (~ 6 mm/a) faults, contrary to the Denali Fault (~ 1 mm/a) North of the syntaxis.The new tectonic model for the Yakutat collision provides an important case study for the understanding of indentor systems. The concomitance of a rigid-block deformation (to the West) and diffuse deformation (to the East), as well as the near-zero slip rate on the lithospheric-scale southern Denali Fault highlight the major control of boundary conditions and the structural heritage on the orogen deformation.
Au SO Yukon – SE Alaska, la frontière entre les plaques Pacifique et Nord-Amérique est marquée par une syntaxe à la transition entre la subduction des Aléoutiennes à l’O et le décrochement de Fairweather – Queen Charlotte au SE. Le mouvement relatif est oblique et la région est marquée par la collision du bloc Yakutat. De la chaine des Chugach – Saint Elias en frontière de plaque (jusqu’à 6 000 m d’altitude) aux grands décrochements intraplaque, les marqueurs de la déformation actuelle apportent des informations sur sa partition dans ce système.Au cours de cette thèse, je m’intéresse dans un premier temps à mesurer la déformation de surface à l’aide d’un réseau GPS dense, déployé jusqu’à 500 km à l’intérieur de la plaque Nord-Amérique. Après un travail minutieux de traitement des données et de correction des effets transitoires (rebond post-glaciaire et post-sismique), un champ de vitesses résiduelles robuste et inédit est produit au niveau de la syntaxe, dont je dérive des taux de déformation. Ces données me permettent de quantifier les vitesses de glissement les failles décrochantes de Fairweather et Denali au Sud, et également de caractériser une déformation bimodale : En frontière de plaques, la déformation est localisée sur les grandes structures (prisme d’accrétion à l’O, Fairweather à l’E) ; Au niveau de la syntaxe, les taux de déformation sont les plus importants et les données GPS mettent en évidence une déformation intraplaque diffuse, similaire à un champ attendu à l’aplomb d’un indenteur. Le bloc Yakutat semble donc contrôler fortement la déformation de la plaque Nord-Amérique.Ce champ de déformation induit des variations latérales fortes sur les grandes failles intraplaque : le système Denali-Totschunda-Duke River. Dans une seconde partie, je réalise une étude géomorphologique régionale pour caractériser le rôle et la vitesse de ces failles. À partir de Modèles Numériques de Terrain très haute résolution (~ 1 m), une cartographie de détail est réalisée. Puis une mission de terrain me permet de mesurer des décalages sur des marqueurs fluviatiles et glaciaires et collecter des échantillons pour les dater. Je mets en évidence une déformation cumulée dextre sur le segment Nord de la faille de Denali, alors que toute la partie Sud déforme verticalement la surface. Cette étude me permet de quantifier de nouvelles vitesses de failles sur le système Denali-Totschunda-Duke River, et de montrer le rôle prépondérant des failles de Totschunda (~ 14 mm/a) et Duke River (~ 6 mm/a) contrairement à la faille de Denali (~ 1 mm/a) au Nord de la syntaxe.Le nouveau modèle cinématique proposé pour la région de collision Yakutat permet d’apporter un nouvel exemple à la compréhension des systèmes d’indenteur. La concomitance d’une déformation de blocs (à l’Ouest) et diffuse (à l’Est), ainsi que l’absence de déformation sur la faille lithosphérique de Denali Sud met en évidence le contrôle majeur des conditions aux limites et de l’héritage structural dans la déformation des orogènes.
https://hal.archives-ouvertes.fr/tel-01241688

tel-01241688
https://hal.archives-ouvertes.fr/tel-01241688
https://hal.archives-ouvertes.fr/tel-01241688/document
https://hal.archives-ouvertes.fr/tel-01241688/file/manuscrit_anais_v2_optimise.pdf

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
The Ronda orogenic peridotite (southern Spain) contains a variety of pyroxene-rich rocks ranging from high-pressure garnet granulites and pyroxenites to low-pressure plagioclasespinel websterites. The 'asthenospherized' part of the Ronda peridotite contains abundant layered websterites ('group C' pyroxenites), without significant deformation, that occur as swarms of layers showing gradual modal transitions towards their host peridotites. Previous studies have suggested that these layered pyroxenites formed by the replacement of refractory spinel peridotites. Here, we present a major- and trace-element, and numerical modelling study of a layered outcrop of group C pyroxenite near the locality of Tolox aimed at constraining the origin of these pyroxenites after host peridotites by pervasive pyroxene-producing, refertilization meltrock reactions. Mg-number [=Mg/(Mg + Fe) cationic ratio] numerical modelling shows that decreasing Mg-number with increasing pyroxene proportion, characteristic of Ronda group C pyroxenites, can be accounted for by a melt-consuming reaction resulting in the formation of mildly evolved, relatively low Mg-number melts (similar to 0.65) provided that the melt fraction during reaction and the time-integrated melt/rock ratio are high enough (>0.1 and >1, respectively) to balance Mg-Fe buffering by peridotite minerals. This implies strong melt focusing caused by melt channelling in high-porosity domains resulting from compaction processes in a partial melted lithospheric domain below a solidus isotherm represented by the Ronda peridotite recrystallization front. The chondrite-normalized rare earth element (REE) patterns of group C whole-rocks and clinopyroxenes are convex-upward. Numerical modeling of REE variations in clinopyroxene produced by a pyroxene-forming, melt-consuming reaction results in curved trajectories in the (Ce/Nd)(N) vs (Sm/Yb)(N) diagram (where N indicates chondrite normalized). Based on (Ce/Nd)(N) values, two transient, enriched domains between the light REE (LREE)-depleted composition of the initial peridotite and that of the infiltrated melt may be distinguished in the reaction column: (1) a lower domain characterized by convex-upward REE patterns similar to those observed in Ronda group C pyroxeniteperidotite; (2) an upper domain characterized by melts with strongly LREE-enriched compositions. The latter are probably volatile-rich, small-volume melt fractions residual after the refertilization reactions that generated group C pyroxenites, which migrated throughout the massifincluding the unmelted lithospheric spinel-tectonite domain. The Ronda mantle domains affected by pyroxenite- and dunite- or harzburgite-forming reactions (the 'layered granular' subdomain and 'plagioclase-tectonite' domain) are on average more fertile than the residual, 'coarse granular' subdomain at the recrystallization front. This indicates that refertilization traces the moving boundaries of receding cooling of a thinned and partially melted subcontinental lithosphere. This refertilization process may be widespread during transient thinning and melting of depleted subcontinental lithospheric mantle above upwelling asthenospheric mantle.
ISSN: 0022-3530

hal-00412200
https://hal.archives-ouvertes.fr/hal-00412200
DOI : 10.1093/petrology/egn014

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
Geochronological, mineralogical, and geochemical analyses have been focussed on the Mont-Loze're- Borne plutonic complex and surrounding rocks (Ce'vennes, French Massif Central) in which B-W-Sn and As-Au-Sb mineralization is encountered. Two main results are highlighted: (1) the existence of a 301-306 Ma magmatohydrothermal event unrelated to the emplacement of the Pont-de-Montvert-Borne plutonic body at 316 Ma; (2) the magmatic and hydrothermal features are strongly associated, both in time and in space, thus demonstrating an intimate connection between mineralizing processes and magmatism in this part of the French Massif Central. We also show that mineralization and associated hydrothermal occurrences do not correspond to a simple and single geochemical signature and that a contamination model must be invoked in order to account for the complexity of isotopic results. This study demonstrates that the application of the O and H isotopic signatures as tracers of the source and nature of fluids in an orogenic context requires some specific care. Finally, a model of the tectonic-magmatic- hydrothermal evolution of the study area is suggested in which we discuss two alternative scenarios. The first one implies the existence of two different hydrothermal/ mineralizing events (Bo-W-Sn and As-Au-Sb ones). The second one suggests the same source for all hydrothermal and mineralized structures.
ISSN: 1437-3254

insu-00576546
https://hal-insu.archives-ouvertes.fr/insu-00576546
https://hal-insu.archives-ouvertes.fr/insu-00576546/document
https://hal-insu.archives-ouvertes.fr/insu-00576546/file/Chauvet-InternationalJournalEarthSciences-2012.pdf
DOI : 10.1007/s00531-011-0639-1

Éditeur(s) : HAL CCSD
Résumé : International audience
We present an overview of the Mid-Cretaceous hyper-extended rift systemexposed in the northern part of the Pyrenean mountain range. Itsinversion during the Pyrenean orogeny allows for precious observationsof the deep-seated processes occurring at the foot of distal margins.Some peculiar aspects characterizing the pre-Alpine hyper-extended domainare examined throughout the 400 km long suture that is fossilizedin the North Pyrenean Zone (NPZ). The high temperature/low pressure(HT/LP) thermal imprint of the extensional event is studied thanksto a dataset of more than hundred peak temperature measurementsby Raman spectroscopy of the carbonaceous material (RSCM). Thepre- and syn-rift metasediments are characterized by an intense, synmetamorphicductile deformation. Focusing on several key-localitiesof the NPZ, we examine the emplacement conditions of the peridotitesin response to this extreme crustal thinning. Geological evidencessuch as the occurrence of peridotite bodies directly underlying metamorphicpre-rift sediments indicate an early attenuation of the rifted continentalcrust. Moreover, syn-rift, Albian-Cenomanian flysch sequenceswere deposited synchronously with the syn-metamorphic ductile deformationof the pre-rift sequences. All along the Internal MetamorphicZone (IMZ), the base of the flysch deposits also recorded the HT tectonicevent. Such a synchronicity between geological events, which aregenerally separated in time, is not common in mountain belts. We examinehow tectonics, metamorphism and sedimentation may be activein a single basin during extension. We propose an original mechanismfor the evolution of the basins involving continuous basal extraction ofthe pre-rift metamorphic sediments. This early HT deformation eventrelates to the « phase anté-Cénomanienne » described by Pyrenean geologistssince 1930.
24 ème Réunion des sciences de la Terre 2014
Pau, France

insu-01080795
https://hal-insu.archives-ouvertes.fr/insu-01080795

Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
A NE-SW magnetotelluric 110 km-long profile including 18 sites was acquired across the western Rif Cordillera along the Eurasian-African plate boundary, allowing to constrain its poorly known deep structure. It extends from the Internal Zones, close to the Alboran coast, crossing the External Zones and up to the Gharb foreland basin. The periods recorded range from 0.001 s to 1000 s. The combination of magnetotelluric data with available geological data provides new insight regarding the relationship between deep and shallow crustal structures of the Rif Cordillera. Analyses of structural dimensionality suggest a preferential NW-SE direction, and a 2D joint inversion was performed. A 3D inversion extending the 2D model along the strike confirmed the reliability of this approach. The magnetotelluric model shows a heterogeneous upper crust in agreement with the geological structures observed at surface. The Internal Zones correspond to resistive (metamorphic rocks) and conductive (peridotites) bodies, while the External Zones and the foreland basin are characterized by large conductive bodies of variable thickness. A crustal detachment level separating shallow geological units from a probable variscan basement was inferred. At depth, the most relevant feature consists of large resistive bodies with a shallow irregular top, located below the frontal part of the Rif. The outcrops of exotic metapelitic, granitic and gneissic blocks in the frontal part of the Cordillera suggest that these large resistive bodies may correspond to a gneissic or granitic basement surrounded by metapelitic rocks. Late contractive thrust and diapiric processes were responsible for their uplift and shallow emplacement. The Rif constitutes an active southwestward vergent orogenic wedge, oblique to the present-day NW-SE convergent Eurasian-African plate boundary.
ISSN: 1525-2027

hal-00670999
https://hal.archives-ouvertes.fr/hal-00670999
DOI : 10.1029/2011GC003783

Éditeur(s) : HAL CCSD
Résumé : Differentiation of the lithospheric mantle occurred principally through partial melting and extraction of melts. Harzburgites are generally considered as melting residues whereas lherzolites are regarded as pristine mantle weakly affected by melting. However, some orogenic peridotites show evidence of igneous refertilization. In this context, this work re-investigates the nature of the Lherz lherzolites (Pyrenees), type-locality of lherzolites, described as a piece of preserved fertile mantle. Structural and geochemical data show that these lherzolites are not pristine but formed through a refertilization reaction between MORB-like melts and refractory lithosphere. Moreover, the Lherz peridotites were partly used to infer the composition of the primitive upper mantle and these results may have important implications for the nature of the late veneer. Additionally, crystal-preferred orientations of minerals (CPO) highlight a strong feedback between melt percolation and finite strain in the percolated rocks. CPO variations are ruled by a subtle balance between instantaneous melt fraction and local strain rate. This work also investigated the effect of melt percolation on Hf, Nd and Sr isotopes. Isotope systematics in Lherz shows that strong isotopic decoupling may arise in a percolation front. The modelling suggests that decoupled isotopic signatures are generated during porous flow and governed by the melt/matrix elements concentrations, chemical diffusivities or efficiency of isotopic homogenization. Melt-rock interactions can generate “intraplate-like” isotopic signatures. This suggests that a part of isotopic signatures of mantle-related rocks could be generated by diffusional processes associated with melt transport.
La différenciation du manteau lithosphérique s'est principalement effectuée par fusion partielle et extraction de magmas. Les harzburgites sont généralement considérées comme des résidus de fusion tandis que les lherzolites représentent un manteau originel peu affecté par la fusion. Cependant, certaines péridotites orogéniques montrent des évidences de refertilisation magmatique. Dans ce contexte, ce travail remet en cause la nature primitive des lherzolites de Lherz (Pyrénées), lithotype de la lherzolite. Les données structurales et géochimiques montrent que ces lherzolites ne représentent pas du manteau préservé mais qu'elles se sont formées par une réaction de refertilisation entre un liquide de type MORB et une lithosphère réfractaire. De plus, les orientations préférentielles de réseau (OPR) des minéraux montrent une forte interdépendance entre la percolation magmatique et la déformation finie observée dans les roches percolées. Les variations d'OPR semblent contrôlées par un équilibre subtil entre fraction de liquide instantanée et taux de déformation local. Ce travail a également abordé les effets de la percolation magmatique sur la variabilité isotopique des roches mantelliques. Les résultats montrent qu'un fort découplage isotopique peut s'observer dans un front de percolation. Les modèles suggèrent que le découplage des signatures isotopiques se produit pendant la percolation, gouverné par le rapport des concentrations en éléments (magma/matrice), la diffusivité et le processus d'homogénéisation isotopique. Les réactions magma/roche peuvent générer des signatures isotopiques de type intraplaque. Ceci suggère qu'une part des signatures isotopiques des roches ou laves dérivées du manteau pourrait être produite par des processus diffusionnels associés à du transport de magma.
https://tel.archives-ouvertes.fr/tel-00431325

tel-00431325
https://tel.archives-ouvertes.fr/tel-00431325
https://tel.archives-ouvertes.fr/tel-00431325/document
https://tel.archives-ouvertes.fr/tel-00431325/file/theseleroux08.pdf

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
The northern Canadian Cordillera (NCC) is an active orogenic belt in northwestern Canada characterized by deformed autochtonous and allochtonous structures that were emplaced in successive episodes of convergence since the Late Cretaceous. Seismicity and crustal deformation are concentrated along corridors located far (>200 to ~800 km) from the convergent plate margin. Proposed geodynamic models require information on crust and mantle structure and strain history, which are poorly constrained. We calculate receiver functions using 66 broadband seismic stations within and around the NCC and process them to estimate Moho depth and P-to-S velocity ratio (Vp/Vs) of the Cordilleran crust. We also perform a harmonic decomposition to determine the anisotropy of the subsurface layers. From these results, we construct simple seismic velocity models at selected stations and simulate receiver function data to constrain crust and uppermost mantle structure and anisotropy. Our results indicate a relatively flat and sharp Moho at 32 ± 2 km depth and crustal Vp/Vs of 1.75 ± 0.05. Seismic anisotropy is pervasive in the upper crust and within a thin (~10–15 km thick) sub-Moho layer. The modeled plunging slow axis of hexagonal symmetry of the upper crustal anisotropic layer may reflect the presence of fractures or mica-rich mylonites. The subhorizontal fast axis of hexagonal anisotropy within the sub-Moho layer is generally consistent with the SE-NW orientation of large-scale tectonic structures. These results allow us to revise the geodynamic models proposed to explain active deformation within the NCC.
ISSN: 2169-9313

Droits : info:eu-repo/semantics/OpenAccess
hal-01685550
https://hal.archives-ouvertes.fr/hal-01685550
https://hal.archives-ouvertes.fr/hal-01685550/document
https://hal.archives-ouvertes.fr/hal-01685550/file/Tarayoun_et_al-2017-Journalsur Geophysical_Research__Solid_Earth.pdf
DOI : 10.1002/2017JB014284

Éditeur(s) : HAL CCSD Wiley-Blackwell
Résumé : International audience
In the Pyrenees, the lherzolites nowhere occur as continuous units. Rather, they always outcrop as restricted bodies, never more than 3 km wide, scattered across Mesozoic sedimentary units along the North Pyrenean Fault. We report the results of a detailed analysis of the geological setting of the Lherz massif (central Pyrenees), the type-locality of lherzolites and one of the most studied occurrences of mantle rocks worldwide. The Lherz body is only 1.5 km long and belongs to a series of ultramafic bodies of restricted size (a few metres to some hundreds of metres), occurring within sedimentary formations composed mostly of carbonate breccias originating from the reworking of Mesozoic platform limestones and dolomites. The clastic formations also include numerous layers of polymictic breccias reworking lherzolitic clasts. These layers are found far from any lherzolitic body, implying that lherzolitic clasts cannot derive from the in situ fragmentation of an ultramafic body alone, but might also have been transported far away from their sources by sedimentary processes. A detailed analysis of the contacts between the Lherz ultramafic body and the surrounding limestones confirms that there is no fault contact and that sediments composed of ultramafic material have been emplaced into fissures within the brecciated carapace of the peridotites. These observations bear important constraints for the mode of emplacement of the lherzolite bodies. We infer that mantle exhumation may have occurred during Albian strike-slip deformation linked to the rotation of Iberia along the proto-North Pyrenean Fault.
ISSN: 0954-4879

hal-00412602
https://hal.archives-ouvertes.fr/hal-00412602