Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
During compressive events, deformation in sedimentary basins is mainly accommodated by thrust faulting and related fold growth. Thrust faults are generally rooted in the basement and may act as conduits or barriers for crustal fluid flow. Most of recent studies suggest that fluid flow through such discontinuities is not apparent and depends on the structural levels of the thrust within the fold-and-thrust belt. In order to constrain the paleofluid flow through the Jaca thrust-sheet-top basin (Paleogene southwest-Pyrenean fold-and-thrust belt) this study compares on different thrust faults located at different structural levels. The microstructures in the different fault zones studied are similar and consist of pervasive cleavage, calcite shear veins (SV1), extension veins (EV1) and late dilatation veins (EV3). In order to constrain the nature and the source of fluids involved in fluid-rock interactions within fault zones, a geochemical approach, based on oxygen and carbon stable isotope and trace element compositions of calcite from different vein generations and host rocks was adopted. The results suggest a high complexity in the paleohydrological behaviors of thrust faults providing evidence for a fluid-flow compartmentalization within the basin. Previous studies in the southern part of the Axial Zone (North of the Jaca basin) indicates a circulation of deep metamorphic water, probably derived from the Paleozoic basement, along fault zones related to the major basement Gavarnie thrust. In contrast, in northern part of the Jaca basin, the Monte Perdido thrust fault is affected by a closed hydrological fluid system involving formation water during its activity. The Jaca and Cotiella thrust faults, in turn, both located more to the south in the basin, are characterized by a composite fluid flow system. Indeed, stable isotope and trace element compositions of the first generations of calcite veins suggest a relatively closed paleohydrological system, whereas the late calcite vein generations, which are probably associated with the late tectonic activity of the basin, support a contribution of both meteoric and marine waters. Based on these results, a schematic fluid-flow model is presented. This model allows visualization of three main fluid flow compartments along a N-S transect.
ISSN: 0264-8172

hal-00963606
https://hal.archives-ouvertes.fr/hal-00963606
DOI : 10.1016/j.marpetgeo.2013.09.005

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
We present a 2-D Contact Dynamics discrete element model for simulating initiation and motion of rock avalanches, integrating hillslope geometry, Mohr-Coulomb rock behavior, pore pressure before avalanche triggering, and avalanche trigger. Avalanche motion is modeled as a dense granular flow of dry frictional and cohesive particles. On the basis of granular physics and shear experiments, we review some of the theories for the unexpectedly long runout of rock avalanches. Different causes are evoked, according to the strength (strong or weak) of the slip surface relative to the bulk. "Mechanical fluidization'' and "acoustic fluidization'' theories state that agitation of rock particles reduces frictional strength, increasing runout. Conversely, granular mechanics suggests that, as "shear-strain'' rate increases, granular material becomes more agitated, more dissipative, and more resistant. Another theory states that dynamic fragmentation of clasts creates an isotropic pressure that drives longer runout. In contrast, granular mechanics suggests that fragmentation may induce fluidization and strengthening of the granular material, while particle size reduction (among others) induces weakening of the granular flow and enhances long runout. Runout is also enhanced for column-like rock masses collapsing from steep hillslopes. Long runout may also be linked to thermal weakening mechanisms at the slip surface (e.g., thermal pressurization, and shear melting), which may lower drastically the shear strength. The model is illustrated with a hypothetical example of a rain-triggered avalanche, mobilizing shallowly dipping layers. Several phases are identified, including slope failure, avalanche triggering resulting from slip weakening, and avalanche motion in which rocks are folded and sheared.
ISSN: 0148-0227

hal-00420883
https://hal.archives-ouvertes.fr/hal-00420883
DOI : 10.1029/2008JF001072

Éditeur(s) : HAL CCSD Springer Verlag (Germany) Springer Verlag
Résumé : Direct numerical simulations of flow through two millimeter-scale rock samples of limestone and sandstone are performed using three diverse fluid dynamic simulators. The resulting steady-state velocity fields are compared in terms of the associated empirical probability density functions (PDFs) and key statistics of the velocity fields. The pore space geometry of each sample is imaged at 5.06−μm voxel size resolution using X-ray microtomography. The samples offer contrasting characteristics in terms of total connected porosity (about 0.31 for the limestone and 0.07 for the sandstone) and are typical of several applications in hydrogeology and petroleum engineering. The three-dimensional fluid velocity fields within the explicit pore spaces are simulated using ANSYS® FLUENT® ANSYS Inc. (2009), EULAG Prusa et al. (Comput. Fluids 37, 1193–1207 2008), and SSTOKES Sarkar et al. (2002). These computational approaches are highly disperse in terms of algorithmic complexity, differ in terms of their governing equations, the adopted numerical methodologies, the enforcement of internal no-slip boundary conditions at the fluid-solid interface, and the computational mesh structure. As metrics of comparison to probe in a statistical sense the internal similarities/differences across sample populations of velocities obtained through the computational systems, we consider (i) integral quantities, such as the Darcy flux and (ii) main statistical moments of local velocity distributions including local correlations between velocity fields. Comparison of simulation results indicates that mutually consistent estimates of the state of flow are obtained in the analyzed samples of natural pore spaces despite the considerable differences associated with the three computational approaches. We note that in the higher porosity limestone sample, the structures of the velocity fields obtained using ANSYS FLUENT and EULAG are more alike than either compared against the results obtained using SSTOKES. In the low-porosity sample, the structures of the velocity fields obtained by EULAG and SSTOKES are more similar than either is to the fields obtained using ANSYS FLUENT. With respect to macroscopic quantities, ANSYS FLUENT and SSTOKES provide similar results in terms of the average vertical velocity for both of the complex microscale geometries considered, while EULAG tends to render the largest velocity values. The influence of the pore space structure on fluid velocity field characteristics is also discussed.
ISSN: 1420-0597

hal-01174152
https://hal.archives-ouvertes.fr/hal-01174152
DOI : 10.1007/s10596-015-9486-7

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
A set of four reactive flow-through experiments at temperature T = 100 degrees C and total pressure P=12 MPa was performed in limestone reservoir samples. By using various ranging from 0.7 to 10 MPa, these experiments mimic mass transfers occurring (1) near the injection well, where the brine is almost saturated with CO2 (i.e. P-CO2 approximate to P), and (2) at increasing distances from the injection well, where the fluid displays lower values and higher divalent cation concentrations due rock dissolution along the fluid pathway. Results for P-CO2 = 10 MPa show non-uniform dissolution features associated with transport-controlled mass transfer, while reaction-controlled uniform dissolution is observed for P-CO2 = 2.5 MPa. The experiment with P-CO2 = 6 MPa allows investigating in detail the transition from transport-to reaction-controlled dissolution. Conversely, the experiment reproducing conditions far from the injection well (P-CO2 = 0.7 MPa), shows a decrease of porosity triggered by the precipitation of Mg-rich calcite. For all the dissolution experiments, the time-resolved porosity phi(t) can be modeled by a simple non-linear equation including parameters that characterise the dissolution regime triggered by the reactivity of the inlet fluid (measured by the Damkohler number, Da). Furthermore, all dissolution experiments display power scaling between permeability (k) and porosity (phi) with distinctly different scaling exponents characterising the reactivity of the fluid percolating the sample, independently from the decrease with time of the reactive surface area. It is shown also that dissolution at moderate positive values of Da seems the most efficient to increase permeability and promote a rapid spreading of the reaction front, while inducing minimal modification of the porosity in the vicinity of the CO2 injection well. These results can be used to parameterize the k-phi function for modeling the earliest dissolution processes occurring in the vicinity of the reaction front.
ISSN: 0009-2541

hal-00445277
https://hal.archives-ouvertes.fr/hal-00445277
DOI : 10.1016/j.chemgeo.2009.03.028

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
A reactive percolation experiment was conducted by injecting seawater into a permeable olivine aggregate at 190 °C and 19 MPa to explore the relationships between hydration reactions and hydrodynamic properties during the onset of serpentinization in the ultramafic lithosphere exposed at mid-ocean ridges. The experiment was stopped after 23 days when the sample became impermeable. The initial flow rate was 0.2 mL/h and then was decreased down to 0.06 mL/h after 8 days. Permeability decreased continuously throughout the experiment. The analyses of fluid chemistry time series and of the mineralogy and structure of the reacted sample showed olivine dissolution and precipitation of proto-serpentine, brucite and Fe-oxides. These reactions are controlled by coupled hydrodynamic and chemical processes interacting at different time and spatial scales. Their first characteristic is the production of silica rich outlet fluids in disequilibrium with the observed reacted mineral assemblages. These compositions are interpreted as resulting from a suite of coupled dissolution-precipitation reactions, controlled at the pore scale by surface kinetic processes, that rapidly reaches steady-state (constant fluid composition independent of fluid flux). Hence, the effective rate of serpentinization was controlled, to the first order, by the transport of reactants during the experiment. Mass balance calculations show that the rate of olivine conversion was fast (0.2-0.5 wt%/day), yet only ∼8 wt% of the olivine sample reacted, because the permeability drop limited fluid circulation. Porosity varied little during the experiment compared to permeability changes: the decrease of permeability was explained by the structure of the newly formed serpentine favouring the clogging of fluid paths. The rate at which permeability decreased was the fastest at low flux conditions. This suggests that permeability changes were not controlled simply by the kinetics of the serpentinization reactions, but mainly reflected the development of low Peclet pore scale zones forming micro-environments that control the serpentinization reaction-paths. These results outline the need to take into account the coupling of hydrodynamic and chemical processes when modelling the effects of reactive transport within the hydrating oceanic lithosphere.
ISSN: 0012-821X

hal-00855043
https://hal.archives-ouvertes.fr/hal-00855043
DOI : 10.1016/j.epsl.2013.03.052

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
At Cima di Gagnone, garnet peridotite and chlorite harzburgite lenses within pelitic schists and gneisses correspond to eclogite-facies breakdown products of hydrated peridotites and are suitable for studying dehydration of serpentinized mantle. Thermobarometry and pseudosection modelling yield peak temperatures of 750-850°C and pressures <3 GPa. The minimum temperature recorded by the garnet peridotite corresponds to the maximum conditions experienced by the chlorite harzburgite, suggesting that these rocks recrystallized cofacially at ∼800°C. Alternatively, they might have decoupled during subduction, as achieved in tectonically active plate interface boundaries. The major and rare earth element (REE) variability of the peridotites was mostly acquired during pre-subduction mantle evolution as a result of partial melting and reactive melt flow. The ultramafic suite is also characterized by fluid-mobile element enrichments (B, Pb, As, Sb, Cs, Li, U, Be), which confirm derivation from variably serpentinized protoliths. Similarity in the U, Pb, B, Li and Sr contents of the Gagnone peridotites to present-day oceanic serpentinites suggests that these elements were partly taken up during initial serpentinization by seawater-derived fluids. Positive Be, As and Sb anomalies suggest involvement of fluids equilibrated with crustal (metasedimentary) reservoirs during subsequent subduction metamorphism and peridotite entrainment in (meta)sediments. Fluid-mobile element enrichment characterizes all peak eclogitic minerals, implying that multiple hydration events and element influx pre-dated the eclogite-facies dehydration. Peak anhydrous minerals retain B, Li, As and Sb concentrations exceeding primitive mantle values and may introduce geochemical anomalies into the Earth's mantle. The relatively low contents of large ion lithophile elements and light REE in the Gagnone peridotites with respect to much higher enrichments shown by metasomatized garnet peridotite pods hosted in migmatites (Ulten Zone, Eastern Alps) suggest that the crustal rocks at Gagnone did not experience partial melting. The Gagnone garnet peridotite, despite showing evidence for chlorite dehydration, retains significant amounts of fluid-mobile elements documenting that no partial melting occurred upon chlorite breakdown. We propose that the Gagnone ultramafic rocks represent a prime example of multi-stage peridotite hydration and subsequent dehydration in a plate interface setting.
ISSN: 0022-3530

hal-01054319
https://hal.archives-ouvertes.fr/hal-01054319
DOI : 10.1093/petrology/egt068

Éditeur(s) : HAL CCSD Elsevier
Résumé : A synthesis of backscatter imagery coupled with a large 3D seismic dataset in the Lower Congo Basin (LCB) reveals a patchy distribution of features interpreted to be associated with fluid seepage from 300 m to 2500 m water depth. With the exception of one region of anomalous backscatter positive-relief mounds, all inferred seep sites occur in negative-relief pockmarks. The extensive 3D seismic dataset in the LCB offers a unique opportunity to study the plumbing system that is feeding surface cold seep systems, and in general, to reconstruct the relationship between tectonics and fluid flow in continental margins. The fluid seeps in the LCB are associated with morphologically, stratigraphically or tectonically controlled focused fluid flow. The integration of the geophysical datasets, backscatter imagery coupled to 3D seismic, clearly indicates that fluid seeps are not randomly distributed, but their seabed organization reflects 1) the location of the underlying structure (reservoir or trap) where the fluids are coming from, 2) the geometry and morphology of the reservoir/trap, and 3) the discontinuities in the sedimentary column along which fluids have migrated. In the LCB seafloor pockmarks are always associated with underlying tectonic structures (fault zones, salt diapirs, polygonal faults) or buried sedimentary bodies (turbiditic channels, erosional surfaces), whereas they never occur above sub-horizontal parallel-stratified fine-grained sediments. Even if triggering processes can not be clearly defined here, we propose a model of seafloor fluid seep organization, which represents a new tool for identifying the geometry of flow pathways and the underlying buried bodies where the fluids are originating from. This qualitative 3D model provides insight into the geohydrologic processes of continental margins.
ISSN: 0025-3227

hal-00406640
https://hal.archives-ouvertes.fr/hal-00406640
DOI : 10.1016/j.margeo.2007.06.003

Éditeur(s) : Gauthier-villars
Résumé : 69 new hydrothermal sites were discovered during the Naudur diving cruise. Dives were conducted between 17 degrees 5 and 18 degrees 40'5 on four segments showing marked contrast in morphology, volcanic, tectonic and hydrothermal activity. At 17 degrees 10'5, 17 degrees 25'5 and 18 degrees 37'5 the ridge has a dome shaped cross-section and is dominated by very active volcanic activity. Early widespread low temperature (<50 degrees C) diffuse hydrothermal discharge is followed by focused high temperature black smokers. At 18 degrees 15'S tectonic activity is dominant, no recent lava was observed, and only two of the 20 hydrothermal sites are active. At 18 degrees 32'5 recent lava representing a new volcanic episode partly covers the bottom of the graben. Deep hydrothermal convection is reactivated with new black smokers along the graben wall. Also, there is low temperature shimmering water from cooling lava flows. These three segments can be considered as successive volcanic/tectonic episodes typical of a fast spreading ridge. Further, the observations support a new model for the temporal evolution of episodic hydrothermal activity. Hydrothermal convection is unstable and superficial during the volcanic stage (dykes injection). At the beginning of the teaonic stage (graben formation) faults allow deep circulation and hot fluid to reach the surface. As the graben widens hydrothermal activity is less important and may cease. The heat of a new volcanic episode reactivates the deep hot water circulation along the graben faults completing a cycle.
69 nouveaux sites hydrothermaux ont été découverts entre 17'5 et 18'40'5 sur quatre segments présentant des activités volcaniques et tectoniques contrastées. A 17°10'S,17025'S et 18'37'5, la ride forme un dôme et l'activité volcanique est dominante. Les émissions hydrothermales sont d'abord diffuses et de basse température, puis focalisées et de haute température. A 18°15'S la majorité des sites hydrothermaux sont inactifs dans un graben axial dépourvu de laves récentes. A 18'32'5, des laves récentes s'épanchent au fond du graben. Les circuits hydrothermaux réactivés par le nouvel épisode volcanique se traduisent par des diffusions sur les laves récentes et par une reprise des émissions de haute température le long des murs du graben. Ces quatre segments traduisent des épisodes volcanoltectoniques successifs, caractéristiques de I'évolution temporelle des dorsales rapides. Les observations permettent de proposer un nouveau modèle de l'activité hydrothermale. Les circuits hydrothermaux sont diffus, peu structurés, instables et superficiels durant les épisodes volcaniques. Au début des épisodes tectoniques, les failles du graben drainent les fluides chauds en profondeur, puis lorsque le graben s'élargit, l'activité s'interrompt. La reprise de l'activité volcanique réamorce les circulations profondes le long des failles du graben.
Comptes Rendus de l'Academie des Sciences Serie II (1251-8069) (Gauthier-villars), 1994-12 , Vol. 319 , N. 11 , P. 1399-1406

Droits : Académie des Sciences
http://archimer.ifremer.fr/doc/00183/29455/27889.pdf
http://archimer.ifremer.fr/doc/00183/29455/

Éditeur(s) : HAL CCSD Wiley
Résumé : International audience
The way faults control upward fluid flow in nonmagmatic hydrothermal systems in extensional context is still unclear. In the Eastern Pyrénées, an alignment of twenty-nine hot springs (29 ∘ C to 73 ∘ C), along the normal Têt fault, offers the opportunity to study this process. Using an integrated multiscale geological approach including mapping, remote sensing, and macro-and microscopic analyses of fault zones, we show that emergence is always located in crystalline rocks at gneiss-metasediments contacts, mostly in the Têt fault footwall. The hot springs distribution is related to high topographic reliefs, which are associated with fault throw and segmentation. In more detail, emergence localizes either (1) in brittle fault damage zones at the intersection between the Têt fault and subsidiary faults or (2) in ductile faults where dissolution cavities are observed along foliations, allowing juxtaposition of metasediments. Using these observations and 2D simple numerical simulation, we propose a hydrogeological model of upward hydrothermal flow. Meteoric fluids, infiltrated at high elevation in the fault footwall relief, get warmer at depth because of the geothermal gradient. Topography-related hydraulic gradient and buoyancy forces cause hot fluid rise along permeability anisotropies associated with lithological juxtapositions, fracture, and fault zone compositions.
ISSN: 1468-8115

hal-01582968
https://hal-brgm.archives-ouvertes.fr/hal-01582968
https://hal-brgm.archives-ouvertes.fr/hal-01582968/document
https://hal-brgm.archives-ouvertes.fr/hal-01582968/file/Taillefer_et_al_Geofluids_2017.pdf
DOI : 10.1155/2017/8190109

Résumé : La thèse est consacrée à la recherche des catastrophes marines (tsunamis, ondes de tempête) dans les Antilles françaises, en utilisant des modèles analytiques et numériques de mécanique des fluides. L'accent est mis sur le développement de modèles de mouvement de glissements de terrain et des vagues causées par ces glissements. Le modèle le plus simple du glissement de terrain «solide block» est utilisé pour évaluer les caractéristiques des flux pyroclastiques du volcan Soufrière-Hills (Montserrat). Un modèle plus complexe de modélisation de glissement de terrain (modèle de Savage-Hutter) a été étudié analytiquement, donnant ainsi une nouvelle famille de solutions exactes décrivant le mouvement de l'écoulement par gravité non linéaire dans une vallée ou dans un canyon sous-marin. Le modèle comprend des ondes simples (Riemann waves),le cas d'un barrage qui cède (dam-break problem), des solutions auto-similaires dans la M-fonne et « chapeaux paraboliques ». Grâce à la théorie linéaire de l'eau peu profonde nous avons étudié le processus de génération de tsunamis par des glissements de terrain de volume variable, se déplaçant à une vitesse variable dans un bassin de profondeur variable. Dans le cas d'un fond marin particulier (cas sans "réflexion"), les phénomènes de résonnance ont été étudiés dans un bassin à profondeur variable. Nous avons utilisé des méthodes numériques pour la résolution non-linéaire des équations des eaux peu profondes afin d'analyser des catastrophes marines réelles (les ondes de tempête causées par le cyclone Lili en 2002, le tsunami volcanique de 2003 à Montserrat) et probables (un tsunami prés des côtes de la Martinique). Des données sur les catastrophes
The dissertation is devoted to research in the field of marine natural hazards (tsunamis, storm surges) in the French West Indies, using analytical and numerical models of fluid mechanics. Emphasis is placed on the development of models of landslide motion and generated tsunami waves. The simple "solid block" model is used to evaluate the characteristics of pyroclastic flow Soufriere Hills volcano (Montserrat). The "fluid model" of a landslide (so called Savage-Hutter model) is studied analytically; within this model a new family of exact solutions that describe the motion of nonlinear gravity flow in a valley or underwater canyon is found: nonlinear Riemann wave, dan break problem, self-similar solutions (M - wave and parabolic cap). In the framework of the linear shallow water theory the process of generation of tsunami waves by landslides of variable volume moving with variable velocity above the basin of variable depth is studied. For the specific bottom profile ("reflectionless" one) the resonant phenomena is investigated in the basin of variable depth. Numerical methods are used to analyze marine hazards: historical (storm surges, caused by Cyclone LILI in 2002; volcanic tsunami 2003 on Montserrat) and possible events (possible tsunami of the coast of Martinique). Various data on marine natural disasters are obtained during field surveys (volcanic tsunami in 2003, stonn surges caused by Hurricane Dean in 2007). Designed catalogs of tsunamis and storm surges are created based on results of numerical modeling and field studies; some statistical analysis is perfomed

http://www.theses.fr/2011AGUY0435/document

Éditeur(s) : HAL CCSD American Society of Mechanical Engineers
Résumé : International audience
The isothermal flow in a model channel of plate-fin heat exchanger with periodically arranged embossed-like vortex generators is investigated. Velocity measurements are performed by LDA in the transitional regime (Reynolds number from 1000 up to 5000). Strong longitudinal vortices are observed downstream of each generator. The vortex roll-up process is highlighted by the evolution of the velocity vector field in the cross section of the flow. The modifications of the vortex characteristics after successively encountered generators are investigated. This work shows most of the flow features which are known to produce heat transfer enhancement, and shows that these smooth shaped vortex generators are very promising for enhanced heat exchangers.
ISSN: 0098-2202

hal-01582938
https://hal.archives-ouvertes.fr/hal-01582938
https://hal.archives-ouvertes.fr/hal-01582938/document
https://hal.archives-ouvertes.fr/hal-01582938/file/Dupont_heat_exchanger_JFE2002_preprint.pdf
DOI : 10.1115/1.1595675

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
An exploration 3D seismic data set from the Gjallar Ridge off mid-Norway images a giant fluid seep structure 3 × 5 km wide, which connects to late Palaeocene magmatic sills at depth. Two of the pipes that have developed as hydrothermal vents reach all the way to the modern seafloor implying that they either were active much longer than the original hydrothermal activity or have been reactivated. We combine detailed seismic analysis of the northern pipe and sandbox modeling to constrain pipe initiation and propagation. Although both the seismic data and the sandbox models suggest that fluids at depth are focused through a vertical conduit, sandbox models show that fluids ascend and reach a critical depth migration where focused migration abruptly transforms into distributed fluid flow through unconsolidated sediments. This indicates that at this level the sediments are intensely deformed during pipe propagation, creating a V-shaped structure, i.e. an inverted cone at depth and a positive relief anomaly, 5 to 10 m high, at the seafloor, which is clearly identified on 3D seismic data. Comparison of the geometries observed in sandbox modeling with the seismically observed geometries of the Giant Gjallar Vent suggests that the Giant Gjallar Vent may be a proto-fluid seep at an early stage of its development, preceding the future collapse of the structure forming a seafloor depression. Our results imply that the Gjallar Giant Vent can be used as a window into the geological processes active in the deep parts of the Vøring Basin.
ISSN: 0025-3227

hal-00772465
https://hal.archives-ouvertes.fr/hal-00772465
DOI : 10.1016/j.margeo.2012.08.010

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Crystal growth driven by a flowing solution is modeled for a flow with low Reynolds number using a computational dynamic software. Considering equivalent crystallographic faces, the chemical flux is calculated along upstream and downstream faces. Upstream flux is higher compared to downstream and leads to a symmetry breakdown of the crystal shape and develops mirror symmetry parallel to the flow velocity. Moreover the ratio of these two fluxes (upstream / downstream) gives a quantitative relation between the relative crystal growth rate and the flow velocity. Thus, using an inverse method, the flow direction and velocity can be deduced by the study of the variation of the growth band thicknesses of equivalent crystallographic faces. This new method was applied to the formation of metasomatic tourmalinite associated with a leucogranite sill. The approach is complemented by a study of the chemistry of the tourmaline. In the studied case, the application of the new method gives the high fluid velocities in pores (10-3 - 10-4 m/s) during metasomatism. Equivalent Darcy velocities are estimated and discussed accounting for the major role played by the regional deformation. Finally, a two-stage tectono-hydrodynamic model is proposed for the metsomatism. The first stage is genetically linked to the sill injection, and the second is characterized by a wider event with hydrothermal flow passing along the leucogranite sills.
ISSN: 0012-821X

Droits : info:eu-repo/semantics/OpenAccess
insu-00352307
https://hal-insu.archives-ouvertes.fr/insu-00352307
https://hal-insu.archives-ouvertes.fr/insu-00352307/document
https://hal-insu.archives-ouvertes.fr/insu-00352307/file/Sizaret_et_al_final.pdf
DOI : 10.1016/j.epsl.2009.01.013

Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
Rainbow is a dome-shaped massif at the 36°14′N nontransform offset along the Mid-Atlantic Ridge. It hosts three ultramafic-hosted hydrothermal sites: Rainbow is active and high temperature; Clamstone and Ghost City are fossil and low temperature. The MoMARDREAM cruises (2007, 2008) presented here provided extensive rock sampling throughout the massif that constrains the geological setting of hydrothermal activity. The lithology is heterogeneous with abundant serpentinites surrounding gabbros, troctolites, chromitites, plagiogranites, and basalts. We propose that a W dipping detachment fault, now inactive, uplifted the massif and exhumed these deep-seated rocks. Present-day deformation is accommodated by SSW-NNE faults and fissures, consistent with oblique teleseismic focal mechanisms and stress rotation across the discontinuity. Faults localize fluid flow and control the location of fossil and active hydrothermal fields that appear to be ephemeral and lacking in spatiotemporal progression. Markers of high-temperature hydrothermal activity (∼350°C) are restricted to some samples from the active field while a more diffuse, lower temperature hydrothermal activity (<220°C) is inferred at various locations through anomalously high As, Sb, and Pb contents, attributed to element incorporation in serpentines or microscale-sulfide precipitation. Petrographic and geochemical analyses show that the dominant basement alteration is pervasive peridotite serpentinization at ∼160–260°C, attributed to fluids chemically similar to those venting at Rainbow, and controlled by concomitant alteration of mafic-ultramafic units at depth. Rainbow provides a model for fluid circulation, possibly applicable to hydrothermalism at oceanic detachments elsewhere, where both low-temperature serpentinization and magmatic-driven high-temperature outflow develop contemporaneously, channeled by faults in the footwall and not along the detachment fault.
ISSN: 1525-2027

hal-01115281
https://hal.archives-ouvertes.fr/hal-01115281
https://hal.archives-ouvertes.fr/hal-01115281/document
https://hal.archives-ouvertes.fr/hal-01115281/file/Andreani_et_al-2014-Geochemistry%2C_Geophysics%2C_Geosystems.pdf
DOI : 10.1002/2014GC005269

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
To better understand the microstructural evolution of a "serpentinized" mantle rock and the influence of various hydrous phases on the seismic properties of the mantle wedge, we have conducted the detailed microstructural analyses of a sample of tremolite-chlorite-antigorite schist collected from the Moses Rock dike (central part of the Colorado Plateau). We performed differential effective media (DEM) modelling to study the effect of three hydrous phases forming two-phase aggregates with olivine, considering the crystallographic preferred orientation (CPO) of each phase and the shape ratio of the hydrous phases. We have demonstrated that in a partially serpentinized peridotite, the olivine CPO characteristic of [100](010) dislocation glide is still preserved, and the high-temperature asthenospheric flow is preserved with a foliation normal to that of antigorite schist. The transformation of olivine into antigorite occurs predominantly (~ 75%) by the relationship (100)ol || (001)atg with [001]ol || [010]atg, with the (010)ol || (001)atg and [001]ol || [010]atg relationship observed in areas of weak antigorite CPO. Chlorite results from the phase transformation of olivine in a relatively static environment, as shown by the correlation between the olivine-chlorite CPOs with (100)ol || (100)ch, (010)ol || (001)ch and (001)ol || (010)ch. The fluid percolation that caused the localized metasomatism and partial hydration of the mantle occurred possibly along trans-lithospheric shear zones. The presence of chlorite induces the most important drop on the P-wave velocities and may help to explain some local low velocities in the fore-arc mantle wedges, but is unlikely to be of global importance due to its very high Vp/Vs ratio ~ 1.9. On the other hand, antigorite is the only phase that causes important modification on the propagation directions of P and S-waves, and the only phase to explain the polarization of the fastest shear waves parallel to the subduction trench.
ISSN: 0040-1951

hal-00858061
https://hal.archives-ouvertes.fr/hal-00858061
DOI : 10.1016/j.tecto.2013.03.022

Éditeur(s) : Elsevier Science Bv
Résumé : Here we present a new geochemical study of Lopevi volcano, one the most active volcanoes in the Vanuatu island arc. We focus on the temporally well-defined sequence of lava flows emitted since 1960, and for the first time, on pre-1960 volcanic products, including high-MgO basalts and felsic andesites, the most evolved lavas sampled so far on this island. This work reports the first Pb and Hf isotopic study of lavas from Lopevi island. These lavas display correlations between differentiation indexes such as SiO2 content and isotopic ratios. The felsic andesites extend the known correlations with both the least (Sr-Pb) and the most (Nd-Hf) radiogenic isotopic compositions on the island. Our results confirm that the rising magma interacted with the sub-arc crust. Assimilation-Fractional Crystallization (AFC) quantitative modeling of trace element ratios and isotopic compositions requires 1% and 10% of assimilated partial melts of a mafic oceanic crust to account for the pre- and post-1960 lavas, respectively. The post-1960 lavas differ from the former lavas emitted similar to 20 years earlier by enrichments in fluid mobile elements (K, Ba, Rb ... ), Th, and Light Rare Earth Elements (LREE). We ascribe these features to slight variations in the metasomatic agent added to the sub-arc mantle and ultimately derived from the subducted lithosphere. However, the contrasting time scales involved in subducted lithosphere dehydration and magma genesis, relative to the time elapsed between eruptions of the two lava series, suggest that two different portions of mantle which have undergone slightly different metasomatism, gave birth to the Lopevi lavas. These distinct magmas are still present beneath the volcano.
Journal Of Volcanology And Geothermal Research (0377-0273) (Elsevier Science Bv), 2013-08 , Vol. 264 , P. 72-84

Droits : 2013 Elsevier B.V. All rights reserved.
http://archimer.ifremer.fr/doc/00167/27801/26223.pdf
DOI:10.1016/j.jvolgeores.2013.07.005
http://archimer.ifremer.fr/doc/00167/27801/

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
After Jurassic rifting, numerous carbonate platforms (i.e., the Orizaba, Cordoba and Golden Lane-Tuxpan platforms) developed during the Lower and Middle Cretaceous episode of thermal subsidence along the western passive margin of the Gulf of Mexico, with intervening basinal domains (i.e., the Tampico-Misantla, Zongolica, Veracruz and Deep Gulf of Mexico - DGM - basins).;During the Late Cretaceous-Paleocene, the east-verging Sierra Madre Oriental thrust belt developed, resulting in tectonic uplift and unroofing of the allochthonous units (i.e. tectonic units made up of former Orizaba and Cordoba platforms and Zongolica Basin series). This new topography provided also an important source of clastics to feed the adjacent foredeep, where coeval tectonic loading accounted for the bending of the foreland lithosphere. However, shallow water facies or even emersion persisted until the Eocene in the forebulge area (at the present location of the Golden Lane), preventing locally the clastics to reach the DGM. This topographic barrier was ultimately bypassed by the clastics only during the Oligocene and Neogene, once (1) the prograding clastic wedge had exceeded accommodation, and (2) the long lasting thermal subsidence of the passive margin could overpass the effect of the bending and force the former bulge to sink.;Numerous paleo-thermo-meters (Tmax, Ro), paleo-thermo-barometers (fluid inclusions), PVT and coupled forward kinematic and thermal modeling have been used to calibrate and date the progressive unroofing of the thrust belt. Coupled tectonic and sedimentologic modeling was applied in the foreland to predict the distribution of sand versus shale ratios in the Oligocene to Plio-Quaternary clastic sedimentary wedge of the passive margin, where gravitational gliding of post-Eocene series occurred during the Neogene along major listric faults.;Mantle dynamics are advocated as the main process accounting for post-orogenic uplift and regional tilting of the basement, which initiated a massive transfer of sediments from the Cordillera towards the Gulf of Mexico, from Oligocene onward, resulting in a destabilization and gravitational collapse of the western slope of the Gulf of Mexico in Neogene times.
ISSN: 0040-1951

hal-00445248
https://hal.archives-ouvertes.fr/hal-00445248
DOI : 10.1016/j.tecto.2009.04.012

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Alkali feldspar thermochronologic modeling with the 40Ar/39Ar method has generated marked advances in knowledge of the mechanisms for argon diffusion in feldspars. While the goal in many cases has been to extrapolate the observed and modeled argon behavior in feldspars to natural geological settings, scientific debate surrounding the true feasibility of such extrapolations and indeed, the validity of thermochronologic modeling in itself, have provided much impetus to improve laboratory techniques to test, and increase basic understanding of, argon diffusion. Two cornerstones for the debate over the feasibility of alkali feldspar thermochronology for modeling natural, geologic processes have been: 1. is volume diffusion the main mechanism for argon movement in feldspars? and 2. if volume diffusion is a viable mechanism, does argon then reside in discrete ‘domains' within the feldspar lattice? We describe a study of alkali feldspars from a profile through a well-controlled brittle fault zone in western Norway; the feldspars document argon loss during deformation and strongly suggest the existence of argon ‘domains' within the feldspars, at least during laboratory step heating. The progressive change in the character of argon diffusion is recognizable in the logr/ro diffusion data from the feldspars and is mimicked by physical changes observed optically in the feldspars through progressive degrees of brittle deformation. Modeling results indicate a reduction in size of the biggest domains and the appearance of smaller domains during the strongest stages of deformation. Whether or not this reveals the existence and the transformation of the domain structure in naturo is difficult to prove from our data alone, but interestingly, this behaviour corresponds directly to the physical (optical) appearance of more intense crack networks and subgrains in progressively more brecciated feldspars. Because the thermochronologic histories derived from modeling the feldspar data conform very well to the known tectonic history of the area, the feldspars appear to have successfully retained physical (optical and isotopic) records of episodic tectonic processes operating from ductile through lowtemperature brittle regimes in rocks with a Caledonian history overprinted by several later (younger) geologic events. However, because the ‘cold' brecciation is the last tectonothermal event recorded by these rocks, it is impossible to truly test for the existence of diffusion domains in naturo. Argon loss appears to have been effective only in the most highly brecciated (deformed) samples where the combination of the connected crack network, increased fluid flow and higher temperatures enhanced diffusion via fast diffusion pathways and thus, volume diffusion from the lattice. Only minor argon loss occurred in zones of lower brittle strain, although some development of cracks and brittle features is evident. Independent of the existence of diffusion domains, this study highlights the possible pitfalls when cooling histories are deduced from brecciated feldspars in which age and diffusion charateristics have been decoupled: while the geochronological memory has survived and is identical to that of nonbrecciated feldspars (suggesting no loss and minor effects of deformation), the diffusion characteristics have been completely transposed by brecciation and the appearance of new domains. Modeling feldspars with these latter characteristics would effectively utilise a new feldspar diffusion structure with an ‘old' (relict) age memory.
ISSN: 0016-7037

hal-00198283
https://hal.archives-ouvertes.fr/hal-00198283
https://hal.archives-ouvertes.fr/hal-00198283/document
https://hal.archives-ouvertes.fr/hal-00198283/file/KsparBreccia_Arnaud_Eide_GCA_2000.pdf

Éditeur(s) : HAL CCSD
Résumé : International audience
The way faults control upward fluid flow in extensive hydrothermal systems without an abnormal heat source such as volcanic or plutonic activity is still unclear. In the Eastern Pyrénées, an alignment of 29 hot springs (from 29 • C to 73 • C) along the Têt normal Fault offers the opportunity to study this process. Using an integrated multi-scale geological approach including mapping, remote sensing, macro and microscopic analyses of fault zones, we show that hot springs locate close to high topographic reliefs related to fault throw and segmentation. Emergences are always in crystalline rocks at gneiss-metasediments contacts, mostly in the Têt Fault footwall. In more details, they localize either (1) in brittle fault damage zones at the intersection between the Têt Fault and subsidiary faults, and (2) into hercynian ductile faults where dissolution cavities run along shear zones. Using these observations and 2D preliminary numerical simulations, we propose a hydrogeological model of upward hydrothermal flow. Meteoric fluids infiltrate at high altitude in the fault footwall relief where they acquire temperature because of the geothermal gradient. Hydraulic gradient and buoyancy forces allow them to upflow along fault-related permeability anisotropies. The identification and prioritization of the features controlling this kind of system have important implications for geothermal exploration and for the understanding of fluid-flow into the brittle Earth's crust in general.
EGU 2017
Vienne, Austria

hal-01491096
https://hal-brgm.archives-ouvertes.fr/hal-01491096
https://hal-brgm.archives-ouvertes.fr/hal-01491096/document
https://hal-brgm.archives-ouvertes.fr/hal-01491096/file/EGU2017-Taillefer-etal_4996.pdf

Éditeur(s) : HAL CCSD Elsevier
Résumé : To contribute to the understanding of how opening-mode fractures (joints) form and open or close at depth in layered rocks, we present a 2D numerical study aiming to determine whether tensile stress can develop in pre-fractured elastic multilayers submitted to biaxial compressive strain conditions. First, we investigate the role of the elastic and geometrical properties of the layers on the development of tensile stress in models with five bonded layers and containing one open fracture in the central layer. Our results indicate that, in absence of elastic contrast (in Young's modulus) between the layers, no tensile stress develops in the models. However, when the fractured layer is stiffer than the two adjacent layers directly above and below, a lobe of horizontal tensile stress develops centered on the pre-existing fracture. The creation of this tensile stress is contingent upon the partial closing of the fracture. The levels of tensile stress and the thickness of the lobe of tensile stress increase logarithmically with an increase in the elastic contrast and are systematically larger for a larger Soft/Stiff ratio (ratio of the total thickness of the soft layers with the total thickness of the stiff layers). Second, we investigate the role of fracture interaction in the development of tensile stress in models containing a pair of open fractures. We observe that the levels of tensile stress in the region between the fractures are systematically higher than those observed in identical models containing a single fracture. This increase in tensile stress is very large for small elastic contrasts between the layers but diminishes when the elastic contrast increases. Furthermore, the spacing between the pre-existing fractures plays an important role in the stress distribution in the region between them. When the fracture spacing is equal to or lower than 1.15 times the height of the fractured layer for the experimental conditions chosen, the lobes of tensile stress centered on the fractures coalesce. This results in the formation of vast areas of tensile stress in models under remote compressive loading conditions. Such tensile areas are likely to allow the initiation and propagation of subsequent opening-mode fractures. The results obtained provide new insights into the formation of joints in layered rocks in compressive environments, with important consequences on fluid flow.
ISSN: 0040-1951

hal-00407576
https://hal.archives-ouvertes.fr/hal-00407576
DOI : 10.1016/j.tecto.2006.12.003