Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
During compressive events, deformation in sedimentary basins is mainly accommodated by thrust faulting and related fold growth. Thrust faults are generally rooted in the basement and may act as conduits or barriers for crustal fluid flow. Most of recent studies suggest that fluid flow through such discontinuities is not apparent and depends on the structural levels of the thrust within the fold-and-thrust belt. In order to constrain the paleofluid flow through the Jaca thrust-sheet-top basin (Paleogene southwest-Pyrenean fold-and-thrust belt) this study compares on different thrust faults located at different structural levels. The microstructures in the different fault zones studied are similar and consist of pervasive cleavage, calcite shear veins (SV1), extension veins (EV1) and late dilatation veins (EV3). In order to constrain the nature and the source of fluids involved in fluid-rock interactions within fault zones, a geochemical approach, based on oxygen and carbon stable isotope and trace element compositions of calcite from different vein generations and host rocks was adopted. The results suggest a high complexity in the paleohydrological behaviors of thrust faults providing evidence for a fluid-flow compartmentalization within the basin. Previous studies in the southern part of the Axial Zone (North of the Jaca basin) indicates a circulation of deep metamorphic water, probably derived from the Paleozoic basement, along fault zones related to the major basement Gavarnie thrust. In contrast, in northern part of the Jaca basin, the Monte Perdido thrust fault is affected by a closed hydrological fluid system involving formation water during its activity. The Jaca and Cotiella thrust faults, in turn, both located more to the south in the basin, are characterized by a composite fluid flow system. Indeed, stable isotope and trace element compositions of the first generations of calcite veins suggest a relatively closed paleohydrological system, whereas the late calcite vein generations, which are probably associated with the late tectonic activity of the basin, support a contribution of both meteoric and marine waters. Based on these results, a schematic fluid-flow model is presented. This model allows visualization of three main fluid flow compartments along a N-S transect.
ISSN: 0264-8172

hal-00963606
https://hal.archives-ouvertes.fr/hal-00963606
DOI : 10.1016/j.marpetgeo.2013.09.005

Éditeur(s) : HAL CCSD American Association of Petroleum Geologists
Résumé : International audience
We describe the structure, microstructure, and petrophysical properties of fault rocks from two normal fault zones formed in low-porosity turbiditic arkosic sandstones, in deep diagenesis conditions similar to those of deeply buried reservoirs. These fault rocks are characterized by a foliated fabric and quartz-calcite sealed veins, which formation resulted from the combination of the (1) pressure solution of quartz, (2) intense fracturing sealed by quartz and calcite cements, and (3) neoformation of synkinematic white micas derived from the alteration of feldspars and chlorite. Fluid inclusion microthermometry in quartz and calcite cements demonstrates fault activity at temperatures of 195degC to 268degC. Permeability measurements on plugs oriented parallel with the principal axes of the finite strain ellipsoid show that the Y axis (parallel with the foliation and veins) is the direction of highest permeability in the foliated sandstone (10-2 md for Y against 10-3 md for X, Z, and the protolith, measured at a confining pressure of 20 bars). Microstructural observations document the localization of the preferential fluid path between the phyllosilicate particles forming the foliation. Hence, the direction of highest permeability in these fault rocks would be parallel with the fault and subhorizontal, that is, perpendicular to the slickenlines representing the local slip direction on the fault surface. We suggest that a similar relationship between kinematic markers and fault rock permeability anisotropy may be found in other fault zone types (reverse or strike-slip) affecting feldspar-rich lithologies in deep diagenesis conditions.
ISSN: 0149-1423

hal-00903428
https://hal.archives-ouvertes.fr/hal-00903428
DOI : 10.1306/03071312127

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
In orogenic systems, thrust faults play a major role in stacking different tectonic units and may act as conduits for the expulsion of large amounts of fluid of different origins (metamorphic, diagenetic, meteoric). This study focuses on the Monte Perdido thrust unit emplaced in the Paleogene Jaca thrust-sheet-top basin, in the SW-central Pyrenees. We aim to decipher the mechanisms and P-T conditions of deformation in fault zones and characterize the related fluid involvement, through combined microstructural, geochemical and microthermometry analyses. Two thrust faults cutting platform limestones, marls and siliciclastic turbidites of the lower part of the basin-fill (Paleocene-lower Eocene) have been studied. The fault zones are characterized by metre-thick shear zones with highly deformed, foliated clay-rich sediments. Foliation is underlined by preferentially oriented phyllosilicates. Several generations of shear and extension calcite, quartz and chlorite-bearing veins attest to fluid-rock interactions during a multi-stage deformation. Microstructural observations and stable isotope analyses on calcite from veins and host sediments suggest that deformation was aseismic and dominated by diffusive mass transfer from pressure solution sites along cleavage and stylolites to the precipitation sites in veins, with mineralizing fluids in equilibrium with the host sediments. Our results suggest an essentially closed hydrologic system, and imply the absence of significant fluid flow along the studied fault zones. Microthermometric study on fluid inclusions present in calcite and quartz veins, and calcite-quartz oxygen isotopic fractionation determined for the first generation shear veins, allow a geothermal gradient of 34 degrees C/km to be estimated. Analytical results demonstrate an evolution of the fault zones in three stages. The first stage was related to the emplacement of the Monte Perdido thrust unit during the middle Eocene at a temperature of similar to 208 degrees C and a burial depth of similar to 5.7 km. The second stage corresponds to a fault reactivation at a temperature of similar to 240 degrees C and a burial depth of similar to 6.5 km. The latter deformation may have been related to folding of the Monte Perdido thrust unit during the emplacement of the underlying Gavarnie thrust unit during the late Eocene-early Oligocene, with deeper burial resulting from aggradation of the thrust-sheet-top basin-fill. The last event corresponds to the formation of a dilatant vein system likely related to the exhumation of the massif.
ISSN: 0191-8141

hal-00644828
https://hal.archives-ouvertes.fr/hal-00644828
DOI : 10.1016/j.jsg.2011.06.006

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
In fold-and-thrust belts, shortening is mainly accommodated by thrust faults which are preferential zones for recrystallisation and mass transfer. This study focuses on a detachment fault related to the emplacement of the Monte Perdido thrust unit in the southern Pyrenees. The studied fault zone consists of a 10 m thick intensively foliated phyllonite developed within the Millaris marls, of Eocene age. The lithological homogeneity of the hanging wall and footwall allows us to compare the Millaris marls outside the fault zone with the highly deformed marls located in the fault zone and to quantify the chemical, mineralogical and volumetric changes related to deformation processes along the fault. The Millaris marls are composed of detrital quartz, illite, chlorite, minor albite and pyrite, in a micritic calcite matrix. In the fault zone, the cleavage planes are marked by clay minerals and calcite ± chlorite veins attest to fluid-mineral interactions during deformation. The mineral proportions in all samples from both the fault zone and Millaris marls have been quantified by two methods: (1) X-ray diffraction and Rietveld refinement, and (2) bulk chemical analyses as well as microprobe analyses to calculate modal composition. The excellent agreement between the results of these two methods allows us to estimate mineralogical variations using a modification of the Gresens' equation. During fault activation, up to 45 wt% of calcite was lost while the amounts of quartz and chlorite remained unchanged. Illite content remained constant to slightly enriched. The mineralogical variations were coupled with a significant volume loss (up to 45%) mostly due to the dissolution of micritic calcite grains. Deformation was accompanied by pressure solution and phyllosilicates recrystallisation. These processes accommodated slip along the fault. They required fluids as catalyst, but they did not necessitate major chemical transfers.
ISSN: 0264-8172

hal-00976361
https://hal.archives-ouvertes.fr/hal-00976361
DOI : 10.1016/j.marpetgeo.2013.12.016

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
Brecciated and fractured peridotites with a carbonate matrix, referred to as ophicalcites, are common features of mantle rocks exhumed in passive margins and mid-oceanic ridges. Ophicalcites have been found in close association with massive peridotites, which form the numerous ultramafic bodies scattered along the North Pyrenean Zone (NPZ), on the northern flank of the Pyrenean belt. We present the first field, textural and stable isotopic characterization of these rocks. Our observations show that Pyrenean ophicalcites belong to three main types: (1) a wide variety of breccias composed of sorted or unsorted millimeter- to meter-sized clasts of fresh or oxidized ultramafic material, in a fine-grained calcitic matrix; (2) calcitic veins penetrating into fractured serpentine and fresh peridotite; and (3) pervasive substitution of serpentine minerals by calcite. Stable isotopic analyses (O, C) have been conducted on the carbonate matrix, veins and clasts of samples from 12 Pyrenean ultramafic bodies. We show that the Pyrenean ophicalcites are the product of three distinct genetic processes: (1) pervasive ophicalcite resulting from relatively deep and hot hydrothermal activity; (2) ophicalcites in veins resulting from tectonic fracturing and cooler hydrothermal activity; and (3) polymictic breccias resulting from sedimentary processes occurring after the exposure of subcontinental mantle as portions of the floor of basins which opened during the mid-Cretaceous. We highlight a major difference between the eastern and western Pyrenean ophicalcites belonging, respectively, to the sedimentary and to the hydrothermal types. Our data set points to a possible origin of the sedimentary ophicalcites in continental endorheic basins, but a post-depositional evolution by circulation of metamorphic fluids or an origin from relatively warm marine waters cannot be ruled out. Finally, we discuss the significance of such discrepancy in the characteristics of the NPZ ophicalcites in the frame of the variable exhumation history of the peridotites all along the Pyrenean realm.
ISSN: 1437-3254

insu-00944405
https://hal-insu.archives-ouvertes.fr/insu-00944405
https://hal-insu.archives-ouvertes.fr/insu-00944405/document
https://hal-insu.archives-ouvertes.fr/insu-00944405/file/clerc-etal-IJES-Review.pdf
DOI : 10.1007/s00531-013-0927-z

Éditeur(s) : HAL CCSD
Résumé : Thrusting fault zone in foreland basins are characterized by highly foliated zones generally enriched in phyllosilicates which can play a major role on the mechanical behaviour of the fault. In this context, investigations of synkinematic clay minerals permit to determine the origin of the fluid from which they precipitated as well as the mechanisms of deformation. Our study is focused on clay mineral assemblages (illite and chlorite) in a major thrust fault located in the Monte Perdido massif (southern Pyrenees), a shallow thrust that affects upper cretaceous-paleocene platform carbonates and lower Eocene marls and turbidites. It implied 3 km of displacement of the Monte Perdido thrust unit with respect to the underlying Gavarnie unit. In this area the cleavage development by pressure-solution is linked to the Monte Perdido and Gavarnie thrust activity. The core zone of the fault, about 6 m thick, consists of an interval of intensely deformed clay-bearing rocks bounded by major shear surfaces. The deformed sediment is markedly darker than the protolith. Calcite-quartz shear veins along the shear planes are abundant. Detailed SEM and TEM observations of highly deformed fault zone samples indicate that clay mineral enrichment in the core zone of the fault is not only related to passive increase by pressure-solution mechanism but that dissolution-recrystallization of phyllosilicates occurs during deformation. A mineral segregation is observed in the highly deformed zone. Newly formed 2M 1 muscovite is present along the cleavage whereas IIb chlorite crystals fill SV2 shear veins suggesting syntectonic growth of phyllosilicates in the presence of fluids in low-grade metamorphic conditions. These mineralogical reactions act as weakening processes and would favour Monte Perdido fault creeping.
Swiss Journal of Geosciences

hal-00795553
https://hal.archives-ouvertes.fr/hal-00795553
DOI : 10.1007/s00015-012-0098-0

Éditeur(s) : HAL CCSD Springer
Résumé : The analysis of three different regions of the South- Pyrenean fold-and-thrust belt reveals that during the Tertiary compression the hydrological system was compartmentalised in time and space. During the early-middle Eocene, when the thrust front affected marine soft-sediments in the Ainsa basin, the thrust fault zones were dominated by formation fluids derived from Eocene marine waters trapped in the underlying Eocene marls, although influences of meteoric waters were also present. During the middle-late Eocene, when the thrust front emplaced marine rocks over continental redbeds in the eastern Catalan basin (L'Escala thrust), the thrust fault zones were dominated by meteoric fluids. These fluids flowed preferentially along these faults, draining laterally the meteoric fluids and acting as barriers hindering their flowing towards more external parts of the belt. During the Oligocene, the most external part of the fold-and-thrust belt in the eastern Catalan basin developed on top of a salt detachment horizon. The thrust front affected continental materials of late Eocene-Oligocene age. At this moment, the thrusts were conduits for meteoric fluids arriving from the surface and also for evolved meteoric fluids migrating over short distance upwards after being in contact with the underlying evaporitic beds. Most of the fractures show a similar sequence of microfractures. Microfractures of stage 1 formed when the sediment was poorly lithified. Microfractures of stage 2 represent the main episode of vein formation which developed when a progressive induration of the host sediment occurred. During microfracture stage 3, formed in an extensional regime, the host sediment was more indurated. The repetition of this sequence of microfractures in different fracture generations of the same outcrop indicates that the sediment induration was restricted to the vicinity of the vein. Away from the veins, the sediment remained poorly lithified during the entire deformation cycle. Calcite cement within the host rock precipitated later than the syn-compressive veins, when the sediment was more indurated. Elemental geochemistry and stable isotopes of the calcite veins indicates that early generation of microfractures is infilled by local fluids (either marine or meteoric), whereas external fluids (meteoric or evolved meteoric) infilled the main compressive stage of microfractures. The hot temperature of these fluids (157°C to 183°C in the Atiart-Arro example) indicates their circulation through deep parts of the thrust belt. The progressive increase of the 87Sr/86Sr ratio through time is due to the progressive uplift, exposure and erosion of the internal Pyrenean Axial Zone.
Thrust belts and foreland basins, from fold kinematics to hydrocarbon systems

hal-00408001
https://hal.archives-ouvertes.fr/hal-00408001
DOI : 10.1007/978-3-540-69426-7_5

Éditeur(s) : HAL CCSD Elsevier
Résumé : The relationship between deformation and so-called fluid paleotransfers in minor faults has been analysed in an argillaceous formation located in the Causses Basin in France. The fluid paleotransfers are related to the fault activity to a large extent. We attempt to estimate the intensity of paleo-deviatoric stress magnitudes under which the fault activity may have occurred and consequently, the change in the structural fault permeability. The paleo-deviatoric stress magnitudes were calculated with the inverse method of Etchecopar applied to calcite twinning. The measured crystals are contained within the core zone of minor faults and this study is based on a previous complete microtectonic and microstructural analysis of the faults. In this paper, analysis of calcite twinning has been applied for the first time to vein fillings associated small faults in a context of relatively weak deformation, a condition ensured by the tectonic and structural analysis. Calculation and discussion of the paleo-deviatoric stress tensors in relation to the evolution of the structural fault permeability and to the hydraulic behaviour of the faults are the aim of this paper. The analysed faults, created and active during the same tectonic event, were permeable under a (;σ;1;–;σ;3;) mean value of 40–50 MPa. On the other hand, the reactivation of faults during a second tectonic event implies mean (;σ;1;–;σ;3;) value higher than 40–50 MPa, especially for the faults that are poorly oriented with respect to the principal tectonic stress directions. The core zone of these faults remained sealed and impermeable or became permeable by development of microcracks inside the pre-existing fillings.
ISSN: 0040-1951

hal-00407577
https://hal.archives-ouvertes.fr/hal-00407577
DOI : 10.1016/j.tecto.2006.09.014

Éditeur(s) : HAL CCSD Wiley-Blackwell
Résumé : This study describes normal fault zones formed in foreland arkosic turbidites (the Grès d'Annot Formation, SW French Alps) under deep diagenesis conditions (~200 °C) and highlights the occurrence of two markedly different fault-rock types: (1) the foliated fault rocks of the Moutière-Restefond area; and (2) the dilatant fault rocks of the Estrop area. The deformation of (1) is dominated by intra- and transgranular fracturing, pressure solution of quartz and feldspar grains and syn-kinematic phyllosilicate precipitation resulting from feldspar alteration. The combination of these mechanisms results in a strongly anisotropic strain with intense shortening normal to the foliation (pressure solution) and extension parallel to the foliation (quartz- and calcite-sealed extension veins). This deformation implies local mass transfer that may be achieved without (or with limited) volume change. The deformation of (2) is expressed as dilatant quartz-sealed veins and breccia textures in which the main mechanisms are transgranular fracturing and quartz precipitation. Type (2) implies fault volume increase, isotropy of deformation and mass transfer at distances larger than in type (1). This study discusses the origins of (1) and (2) and shows that the permeability of (1) is anisotropic, with higher values than the host rocks parallel to the Y main deformation axis (i.e. perpendicular to the slip vector), whereas the permeability of (2) is isotropic and equivalent to that of the host rocks.
ISSN: 0954-4879

hal-01115177
https://hal.archives-ouvertes.fr/hal-01115177
DOI : 10.1111/ter.12100

Éditeur(s) : HAL CCSD
Résumé : The Restefond fault, located in the Late Eocene-Early Oligocene Alpine foreland basin, affects the well lithified and low porosity Grès d'Annot. The fault core zone is characterized by the occurrence of highly deformed sandstone lenses. Deformation inside the lenses corresponds to mm to sub-mm-spaced cleavage planes rich in phyllosilicates and up to cm-thick and dm-long quartz-calcite pure extensional veins. The cleavages are mostly composed of newly-formed synkinematic white mica and chlorite. By using thermodynamic thermometers based on the chemical composition of chlorite, a temperature of 200 ± 20 °C of fault activity was computed. This temperature shows that the Restefond fault was active at burial conditions comprised between 6.5 and 8 km, assuming a mean geothermal gradient between 25 and 30 °Ckm−1. The petrophysic properties of sandstones from the core zone and in the hanging and foot wall of the fault were determined on drilled plugs following three spacial directions. The permeability of the highly deformed sandstone from the core zone is about one order of magnitude higher than in the host rock. This increase in permeability occurs in the direction parallel to the S-C structures and is explained by the occurrence of well-connected micropores localized between platy phyllosilicates. This study shows that the fault petrophysic properties are mostly controlled by the precipitation of synkinematic phyllosilicates under deep burial conditions.
Swiss Journal of Geosciences

hal-00795551
https://hal.archives-ouvertes.fr/hal-00795551
DOI : 10.1007/s00015-012-0099-z

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Sapat peridotite in Kohistan (NW Pakistan) is a 12x1 km sized body of meta-harzburgites, dunites, pyroxenites and meta-gabbros in the hanging wall of the Indus Suture Zone. Field relations, micro-textures, bulk and mineral chemistry document melt-rock reactions producing dunites at the expense of meta-harzburgites, and a consecutive olivine-clinopyroxenite formation from the same melt type. The association of mesa-gabbros, dunites, and pyroxenites is interpreted as a crust-mantle transition zone produced by the percolation of highly depleted primitive arc melt. The meta-harzburgites represent large portions of refractoty mantle that have suffered melt extraction and metasomatism prior to their interaction with the dunite-forming primitive arc melt and the establishment of the crust-mantle transition zone. Uncommon vein assemblages in the dunites that include Cr-clinochlore, calcite and olivine document a late percolation of slab-related, volatile-rich fluids. Taking into account the highly refractory composition of the Sapat mantle, its structural position, the evidence for interaction with highly depleted arc melts and the sub-solidus interaction with volatile-rich arc fluids, the Sapat ultramafic rocks are interpreted as being derived from the frontal Kohistan arc, representing a crust-mantle transition formed by arc magmatism.
ISSN: 0024-4937

hal-00424515
https://hal.archives-ouvertes.fr/hal-00424515
DOI : 10.1016/j.lithos.2008.07.004

Éditeur(s) : HAL CCSD
Résumé : National audience
Un ensemble de données sur l’environnement géologique despéridotites de la Zone Nord-Pyrénéenne a été obtenu dans lecadre des programmes ANR Pyramid et RGF-BRGM consacrésà l’évolution géodynamique des Pyrénées. Ces données représententdes contraintes indispensables pour l’étude des processus del’exhumation du manteau, de l’amincissement de la croûte continentaleet de sa disparition complète lors de l’ouverture desbassins transtensifs albo-cénomaniens. On y trouve : (1) de nouveauxlevés géologiques de détail autour des lherzolites de Lherz-Freychinède-Vicdessos-Bestiac-Prades et d’Urdach-Les Pernes et(2) des analyses multi-méthodes des métasédiments de la couvertureprérift et du socle paléozoïque adhérent au manteau :composition des assemblages du métamorphisme HT, températuresmaximales par spectrométrie RAMAN sur la m.o., fabriquede la calcite par EBSD, inclusions fluides et isotopes stables dansles marbres et veines associées, datations U-Th-Pb in situ. Cesdonnées permettent d’estimer les conditions thermiques lors de laremontée du manteau et de sa mise à l’affleurement. Nous montronsune variabilité remarquable de l’Ouest vers l’Est.A l’Ouest, le manteau est exhumé à l’Albien sup. - Cénomanieninf. en perçant une couverture mésozoïque prérift qui n’a pas étéchauffée à plus de 250C. La croûte continentale supérieure y estréduite en lames ductiles extrêmement amincies puis cataclaséeset remaniées sur le fond ultrabasique avec des fragments de manteauet de la couverture prérift, durant le dépôt du flysch noir. Latempérature augmente au cours du Cénomanien (480C) dans leszones où le manteau n’a pas été mis à l’affleurement. Le Triassupérieur se transforme profondément (talc-chlorites) et perd sacomposante évaporitique. La couverture prérift décollée joue unrôle majeur comme couvercle isotherme, suivi en cela par les flyschsalbiens puis cénomaniens.A l’Est, le manteau perce à travers une couverture chauffée localementà plus de 600C. Le Keuper y est réduit à quelquesdécimètres de grès et brèches riches en saphirine. La croûtesupérieure a été presque totalement éliminée tectoniquement, maisdes granulites sont remaniées à côté des péridotites et des marbresdans les brèches recouvrant le manteau exhumé.Ces données de terrain représentent les contraintes de base pourconstruire les modèles d’amincissement crustal. La variabilitémise en évidence (gradient thermique et présence ou absence decroûte profonde remaniée) ne permet pas de proposer un modèled’amincissement simple et unique. Cependant, toutes ces donnéesindiquent que la croûte moyenne à supérieure se comporteductilement sous les écrans thermiques de la couverture prériftet synrift, mobiles sur le Keuper. Un modèle de marge passivedistale faisant appel à des blocs continentaux rigides de type ”extensional allochthons ” ne peut s’appliquer ici. Sur la base deces données géologiques, nous mettons donc en avant un nouveaumodèle de type marge distale chaude plus ou moins transtensive.
RST 2016, livre des résumés
Caen, France

insu-01388463
https://hal-insu.archives-ouvertes.fr/insu-01388463

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Synkinematic phyllosilicates in fault zones can be used to deduce the deformation mechanisms and the conditions of fault activity, as their chemical composition, crystal structure and texture can record the different stages of deformation and fluid-rock interactions. The Pic de Port Vieux, a second-order thrust related to the major Gavarnie thrust in the southern central part of the Pyrenees Axial Zone, juxtaposes Triassic pelites of the hanging wall and Cretaceous limestones of the footwall. In order to investigate the mineralogical and geochemical changes and constrain the deformation conditions of thrusting, characterization of phyllosilicates was performed along a transect in the fault hanging wall pelites. The Triassic pelites are mainly composed of quartz, calcite, phyllosilicates (chlorite and K-white mica) and ± hematite. The core fault zone thickness is estimated to be about one meter of intensively foliated green pelites, whereas the damage zone is composed of several meters of red pelites. XRD data demonstrated that the difference in color is related to hematite which is only present in the damage zone. Phyllosilicates of the damage zone are mainly inherited/diagenetic K-white mica and chlorite. In the core zone, newly formed chlorite is abundant and preferentially located in veins. It is enriched in Fe compared to the chlorite of the red pelites. The well-defined foliation in the core zone is overlaid by preferentially oriented muscovite grains which have homogeneous compositions, with less Na and relatively more Fe than mica from the red pelites. Newly formed chlorite and muscovite in the core zone are synkinematic to the fault activity. They are both related to deformation processes and fluid rock interactions. Kübler index measurements and chlorite thermometry show that synkinematic phyllosilicates have registered a temperature of 270°C ± 23°C for the damage zone and 285°C ± 28°C for the core zone which are corresponding to lower-anchizone/epizone grade conditions. Numerical modelling with the geochemical modelling program PhreeqC was performed to determine the favorable conditions for the mineralogical change between red and green pelites. It suggests that the main critical parameter favoring hematite dissolution and chlorite precipitation in the core zone, is the redox conditions. According to the model, the chemical changes in the core zone occurred due to interactions with highly reductive fluids. In addition, the hematite dissolution maybe the source of iron for newly formed phyllosilicates in the core zone that are more iron rich compared to those from the red pelites.
ISSN: 0169-1317

hal-01536006
https://hal.archives-ouvertes.fr/hal-01536006
DOI : 10.1016/j.clay.2017.05.008