Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
During compressive events, deformation in sedimentary basins is mainly accommodated by thrust faulting and related fold growth. Thrust faults are generally rooted in the basement and may act as conduits or barriers for crustal fluid flow. Most of recent studies suggest that fluid flow through such discontinuities is not apparent and depends on the structural levels of the thrust within the fold-and-thrust belt. In order to constrain the paleofluid flow through the Jaca thrust-sheet-top basin (Paleogene southwest-Pyrenean fold-and-thrust belt) this study compares on different thrust faults located at different structural levels. The microstructures in the different fault zones studied are similar and consist of pervasive cleavage, calcite shear veins (SV1), extension veins (EV1) and late dilatation veins (EV3). In order to constrain the nature and the source of fluids involved in fluid-rock interactions within fault zones, a geochemical approach, based on oxygen and carbon stable isotope and trace element compositions of calcite from different vein generations and host rocks was adopted. The results suggest a high complexity in the paleohydrological behaviors of thrust faults providing evidence for a fluid-flow compartmentalization within the basin. Previous studies in the southern part of the Axial Zone (North of the Jaca basin) indicates a circulation of deep metamorphic water, probably derived from the Paleozoic basement, along fault zones related to the major basement Gavarnie thrust. In contrast, in northern part of the Jaca basin, the Monte Perdido thrust fault is affected by a closed hydrological fluid system involving formation water during its activity. The Jaca and Cotiella thrust faults, in turn, both located more to the south in the basin, are characterized by a composite fluid flow system. Indeed, stable isotope and trace element compositions of the first generations of calcite veins suggest a relatively closed paleohydrological system, whereas the late calcite vein generations, which are probably associated with the late tectonic activity of the basin, support a contribution of both meteoric and marine waters. Based on these results, a schematic fluid-flow model is presented. This model allows visualization of three main fluid flow compartments along a N-S transect.
ISSN: 0264-8172

hal-00963606
https://hal.archives-ouvertes.fr/hal-00963606
DOI : 10.1016/j.marpetgeo.2013.09.005

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
The chemical and isotopic compositions of clay minerals such as illite and chlorite are commonly used to quantify diagenetic and low-grade metamorphic conditions, an approach that is also used in the present study of the Monte Perdido thrust fault from the South Pyrenean fold-and-thrust belt. The Monte Perdido thrust fault is a shallow thrust juxtaposing upper Cretaceous-Paleocene platform carbonates and Lower Eocene marls and turbidites from the Jaca basin. The core zone of the fault, about 6 m thick, consists of intensely deformed clay-bearing rocks bounded by major shear surfaces. Illite and chlorite are the main hydrous minerals in the fault zone. Illite is oriented along cleavage planes while chlorite formed along shear veins (<50 μm in thickness). Authigenic chlorite provides essential information about the origin of fluids and their temperature. δ18O and δD values of newly formed chlorite support equilibration with sedimentary interstitial water, directly derived from the local hanging wall and footwall during deformation. Given the absence of large-scale fluid flow, the mineralization observed in the thrust faults records the P-T conditions of thrust activity. Temperatures of chlorite formation of about 240°C are obtained via two independent methods: chlorite compositional thermometers and oxygen isotope fractionation between cogenetic chlorite and quartz. Burial depth conditions of 7 km are determined for the Monte Perdido thrust reactivation, coupling calculated temperature and fluid inclusion isochores. The present study demonstrates that both isotopic and thermodynamic methods applied to clay minerals formed in thrust fault are useful to help constrain diagenetic and low-grade metamorphic conditions.
ISSN: 0010-7999

hal-00757736
https://hal.archives-ouvertes.fr/hal-00757736
DOI : 10.1007/s00410-011-0718-0

Éditeur(s) : HAL CCSD Geological Society of London
Résumé : The Zagros Simply Folded Belt (ZSFB) is an active fold-and-thrust belt resulting from the still continuing continental collision between the Arabian plate and the Iranian plate, which probably started in the Oligocene. The present-day shortening (N25°) is well documented by focal mechanisms of earthquakes and global positioning system (GPS) surveys. We propose in this study a comparison of published palaeostress markers, including magnetic fabric, brittle deformation and calcite twinning data. In addition, we describe the magnetic fabric from Palaeocene carbonates (10 sites) and Mio-Pliocene clastic deposits (15 sites). The magnetic fabrics are intermediate, with magnetic foliation parallel to the bedding, and a magnetic lineation mostly at right angles to the shortening direction. This suggests that the magnetic fabric retains the record of an early layer-parallel shortening (LPS) that occurred prior to folding. The record of LPS allows the identification of originally oblique folds such as the Mand Fold, which have developed in front of the Kazerun Fault. The shape parameter of the magnetic fabric indicates a weak strain compatible with the development of detachment folds in the ZSFB. The palaeostress datasets, covering the Palaeocene to Pleistocene time interval, support several folding episodes accompanied by a counter-clockwise rotation of the stress field direction. The Palaeocene carbonates in the ZSFB record a N47 LPS during early to middle Miocene detachment folding in the High Zagros Belt (HZB). The Mio-Pliocene clastic deposits recorded a N38 LPS prior to and during detachment folding within the ZSFB at the end of the Miocene-Pliocene. Similarly, fault slip and calcite twin data from the ZSFB also support a counter-clockwise rotation from NE to N20 between the pre-folding stage and the late rejuvenation of folds. This counter-clockwise trend of palaeostress data agrees with fault slip data from the HZB. During the late stage of folding in the ZSFB, the Plio-Quaternary palaeostress trends are consistently parallel to the present-day shortening direction.
Tectonic and stratigraphic evolution of Zagros and Makran during the Mesozoic-Cenozoic

hal-00545036
https://hal.archives-ouvertes.fr/hal-00545036
DOI : 10.1144/SP330.6

Éditeur(s) : HAL CCSD Geological Society
Résumé : International audience
Deformation mechanisms, long-term kinematics and evolution of fold and thrust belts subjected to erosion are studied through 2D analogue experiments involving large convergence. First-order parameters tested include (1) décollements and/or plastic layers interbedded at different locations within analogue materials and (2) synconvergence surface erosion. Weak layers, depending on their location in the model, favour deformation partitioning characterized by the simultaneous development of underplating domains in the inner part of the wedge (basal accretion) and frontal accretion where the wedge grows forward. Interaction between tectonics and surface processes influences this behaviour. Development of antiformal thrust stacks controlled by underplating shows small- and large-scale cyclicity. Thin plastic layers induce folding processes, which are studied at wedge scale. Recumbent and overturned folds, with large inverted limbs, develop in a shear-induced asymmetric deformation regime via progressive unrolling of synclinal hinges. Surface erosion and underplating at depth induce further rotation (passive tilting) and horizontalization of fold limbs. Model results give insights to discuss the mechanisms responsible for the large-scale structures (i.e. antiformal nappe stacks, klippen and kilometre-scale recumbent fold-nappes) encountered in several mountain belts such as the Montagne Noire (French Massif Central), the Galicia Variscan belt (Spain) and the northern Apennines (Italy).
ISSN: 0016-7649

hal-00937644
https://hal.archives-ouvertes.fr/hal-00937644
DOI : 10.1144/jgs2013-012

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
In orogenic systems, thrust faults play a major role in stacking different tectonic units and may act as conduits for the expulsion of large amounts of fluid of different origins (metamorphic, diagenetic, meteoric). This study focuses on the Monte Perdido thrust unit emplaced in the Paleogene Jaca thrust-sheet-top basin, in the SW-central Pyrenees. We aim to decipher the mechanisms and P-T conditions of deformation in fault zones and characterize the related fluid involvement, through combined microstructural, geochemical and microthermometry analyses. Two thrust faults cutting platform limestones, marls and siliciclastic turbidites of the lower part of the basin-fill (Paleocene-lower Eocene) have been studied. The fault zones are characterized by metre-thick shear zones with highly deformed, foliated clay-rich sediments. Foliation is underlined by preferentially oriented phyllosilicates. Several generations of shear and extension calcite, quartz and chlorite-bearing veins attest to fluid-rock interactions during a multi-stage deformation. Microstructural observations and stable isotope analyses on calcite from veins and host sediments suggest that deformation was aseismic and dominated by diffusive mass transfer from pressure solution sites along cleavage and stylolites to the precipitation sites in veins, with mineralizing fluids in equilibrium with the host sediments. Our results suggest an essentially closed hydrologic system, and imply the absence of significant fluid flow along the studied fault zones. Microthermometric study on fluid inclusions present in calcite and quartz veins, and calcite-quartz oxygen isotopic fractionation determined for the first generation shear veins, allow a geothermal gradient of 34 degrees C/km to be estimated. Analytical results demonstrate an evolution of the fault zones in three stages. The first stage was related to the emplacement of the Monte Perdido thrust unit during the middle Eocene at a temperature of similar to 208 degrees C and a burial depth of similar to 5.7 km. The second stage corresponds to a fault reactivation at a temperature of similar to 240 degrees C and a burial depth of similar to 6.5 km. The latter deformation may have been related to folding of the Monte Perdido thrust unit during the emplacement of the underlying Gavarnie thrust unit during the late Eocene-early Oligocene, with deeper burial resulting from aggradation of the thrust-sheet-top basin-fill. The last event corresponds to the formation of a dilatant vein system likely related to the exhumation of the massif.
ISSN: 0191-8141

hal-00644828
https://hal.archives-ouvertes.fr/hal-00644828
DOI : 10.1016/j.jsg.2011.06.006

Éditeur(s) : HAL CCSD Springer
Résumé : The analysis of three different regions of the South- Pyrenean fold-and-thrust belt reveals that during the Tertiary compression the hydrological system was compartmentalised in time and space. During the early-middle Eocene, when the thrust front affected marine soft-sediments in the Ainsa basin, the thrust fault zones were dominated by formation fluids derived from Eocene marine waters trapped in the underlying Eocene marls, although influences of meteoric waters were also present. During the middle-late Eocene, when the thrust front emplaced marine rocks over continental redbeds in the eastern Catalan basin (L'Escala thrust), the thrust fault zones were dominated by meteoric fluids. These fluids flowed preferentially along these faults, draining laterally the meteoric fluids and acting as barriers hindering their flowing towards more external parts of the belt. During the Oligocene, the most external part of the fold-and-thrust belt in the eastern Catalan basin developed on top of a salt detachment horizon. The thrust front affected continental materials of late Eocene-Oligocene age. At this moment, the thrusts were conduits for meteoric fluids arriving from the surface and also for evolved meteoric fluids migrating over short distance upwards after being in contact with the underlying evaporitic beds. Most of the fractures show a similar sequence of microfractures. Microfractures of stage 1 formed when the sediment was poorly lithified. Microfractures of stage 2 represent the main episode of vein formation which developed when a progressive induration of the host sediment occurred. During microfracture stage 3, formed in an extensional regime, the host sediment was more indurated. The repetition of this sequence of microfractures in different fracture generations of the same outcrop indicates that the sediment induration was restricted to the vicinity of the vein. Away from the veins, the sediment remained poorly lithified during the entire deformation cycle. Calcite cement within the host rock precipitated later than the syn-compressive veins, when the sediment was more indurated. Elemental geochemistry and stable isotopes of the calcite veins indicates that early generation of microfractures is infilled by local fluids (either marine or meteoric), whereas external fluids (meteoric or evolved meteoric) infilled the main compressive stage of microfractures. The hot temperature of these fluids (157°C to 183°C in the Atiart-Arro example) indicates their circulation through deep parts of the thrust belt. The progressive increase of the 87Sr/86Sr ratio through time is due to the progressive uplift, exposure and erosion of the internal Pyrenean Axial Zone.
Thrust belts and foreland basins, from fold kinematics to hydrocarbon systems

hal-00408001
https://hal.archives-ouvertes.fr/hal-00408001
DOI : 10.1007/978-3-540-69426-7_5

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Lithospheric-scale faults related to oblique subduction are responsible for some of the most hazardous earthquakes reported worldwide. The mega-thrust in the Sunda sector of the Sumatran oblique subduction has been intensively studied, especially after the infamous 2004 Mw 9.1 earthquake, but its onshore kinematic complement within the Sumatran subduction, the transform Sumatran Fault System, has received considerably less attention. In this paper, we apply a combination of analysis of Digital Elevation Models (ASTER GDEM) and field evidence to resolve the kinematics of the leading edge of deformation of the northern sector of the Sumatran Fault System. To this end, we mapped the northernmost tip of Sumatra, including the islands to the northwest, between 4.5°N and 6°N. Here, major topographic highs are related to different faults. Using field evidence and our GDEM structural mapping, we can show that in the area where the fault bifurcates into two fault strands, two independent kinematic regimes evolve, both consistent with the large-scale framework of the Sumatran Fault System. Whereas the eastern branch is a classic Riedel system, the western branch features a fold-and-thrust belt. The latter contractional feature accommodated significant amounts (c. 20%) of shortening of the system in the study area. Our field observations of the tip of the NSFS match a strain pattern with a western contractional domain (Pulau Weh thrust splay) and an eastern extensional domain (Pulau Aceh Riedel system), which are together characteristic of the tip of a propagating strike-slip fault, from a mechanical viewpoint. For the first time, we describe the strain partitioning resulting from the propagation of the NSFS in Sumatra mainland. Our study helps understanding complex kinematics of an evolving strike-slip system, and stresses the importance of field studies in addition to remote sensing and geophysical studies.
ISSN: 0040-1951

hal-01467196
https://hal.archives-ouvertes.fr/hal-01467196
DOI : 10.1016/j.tecto.2016.04.050

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
This study provides new Ar-40/Ar-39 geochronological constraints on the age of the Alpine tectonics in the Aspromonte Massif (southern part of the Calabrian-Peloritan belt). This massif exposes the upper units of the Calabride Complex which originated from the European continental margin. The Calabride Complex was incorporated in the Alpine orogenic wedge and then integrated into the Apennines and Maghrebides fold- and-thrust belts. Throughout the Calabride Complex there is evidence for a two stage tectonic history, which remains however rather poorly dated: Alpine nappe stacking is followed by extensional reworking along the former thrust contacts or along new detachment surfaces. Our new ages suggest that exhumation of the uppermost units, which accompanied nappe stacking, probably started at 45 Ma and that the deepest units were almost completely exhumed at 33 Ma. This kinematics probably corresponds to syn-orogenic extension while the end of exhumation is clearly related to the extensional tectonics dated at 28.6 Ma along detachment structures.;Our geochronological data reveal a very short lag time between accretional and extensional processes in this part of the Mediterranean Alpine orogenic belt. The direction of extension, when the units are restored to their initial position (i.e. before the opening of the Western Mediterranean basins and the bending of the arc) is NNE-SSW. Such a direction does not fit with the eastward slab-retreat model generally put forward to explain extension in the Western Mediterranean. In contrast, we provide evidence for roughly N-S middle Oligocene extension in the accretionary prism, not previously described in this part of the Mediterranean domain.
ISSN: 0024-4937

hal-00475649
https://hal.archives-ouvertes.fr/hal-00475649
DOI : 10.1016/j.lithos.2009.10.011

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Longmen Shan (Sichuan, China) is characterised by an unusual morphology which results from a Triassic prism tectonics and a more recent Neogene thick-skin thrusting. Among its specific features is the high elevation of the internal zones in continuity with the Songpan Garze fold-and-thrust belt (SG), which is associated with an abrupt 20 km Moho offset between the Sichuan Basin and the Tibetan plateau as revealed by the analysis of teleseismic data acquired by a dense seismic network. The jump in crustal thickness is located at the apex of the Wenchuan shear zone (WSZ) and marks the western boundary of the metamorphosed units of SG characterized by temperatures varying from 590 degrees C down to 300 degrees C as commonly observed in mature accretionary wedges. Both the structural style marked by intense shortening in tight kink folds and geophysical data suggest the presence of an horizontal discontinuity at similar to 15 km depth over a thick crust (similar to 63 km).;The Longmen Shan east of the WSZ is characterized by thick-skin detachment which thrusts the internal sedimentary units and the Proterozoic basement over the series of the Sichuan Basin deposited on a thinner crust of similar to 44 km thick. The major front is the Beichuan Fault Zone (BFZ) which brought the internal zones onto Triassic and Jurassic series with lower temperatures (less than 400 degrees C). Locally, temperatures of similar to 425 degrees C are found just below the klippes.;These results are in agreement with an original contact of the SG zone represented by an accretionary wedge of sediments thrusted over the margin of the continental crust of the Yangtze craton in the early stage (Indosinian) of the evolution. The present-day slow E-W component of the convergence, added to the difference in crustal thickness caused the Yangtze crust to indent the Songpan Tibetan crust which was softened by a high thermal regime. As a response the edge of the Tibet crust was inflated to the bottom (up to 70 km), whereas to the top, the crystalline massif were exhumed and pushed the deformation eastward as emerging and blind thrusts. This configuration reflects a moderate shortening of the crust which behaves as a soft thick material abutting the resistant and cold Yangtze crust.
ISSN: 0040-1951

hal-00534849
https://hal.archives-ouvertes.fr/hal-00534849
DOI : 10.1016/j.tecto.2010.03.018

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
In the framework of the Africa-Europe convergence, the Mediterranean system presents a complex interaction between subduction rollback and upper-plate deformation during the Tertiary. The western end of the system shows a narrow arcuate geometry across the Gibraltar arc, the Betic-Rif belt, in which the relationship between slab dynamics and surface tectonics is not well understood. The present study focuses on the Western Betics, which is characterized by two major thrusts: 1/ the Internal/External Zone Boundary limits the metamorphic domain (Alboran Domain) from the fold-and-thrust belts in the External Zone; 2/ the Ronda Peridotites Thrust allows the juxtaposition of a strongly attenuated lithosphere section with large bodies of sub-continental mantle rocks on top of upper crustal rocks. New structural data show that two major E-W strike-slip corridors played a major role in the deformation pattern of the Alboran Domain, in which E-W dextral strike-slip faults, N60 thrusts and N140 normal faults developed simultaneously during dextral strike-slip simple shear. Olistostromic sediments of Lower Miocene age were deposited and deformed in this tectonic context and hence provide an age estimate for the inferred continuous westward translation of the Alboran Domain that is accommodated by an E-W lateral (strike-slip) ramp and a N60 frontal thrust. The crustal emplacement of large bodies of sub-continental mantle may occur at the onset of this westward thrusting in the Western Alboran domain. At lithosphere-scale, we interpret the observed deformation pattern as the subduction upper-plate expression of a lateral slab tear and its westward propagation since Lower Miocene.
ISSN: 0040-1951

insu-01163695
https://hal-insu.archives-ouvertes.fr/insu-01163695
https://hal-insu.archives-ouvertes.fr/insu-01163695/document
https://hal-insu.archives-ouvertes.fr/insu-01163695/file/Frasca-2015.pdf
DOI : 10.1016/j.tecto.2015.05.017

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Souttoufide belt is situated between the High-Atlas in the north, the Mauritanides in the south and the West African Craton as well as the Tindouf basin in the east. Thus, this belt is a part of the West African fold belt system which surrounds the West African Craton. Outcrops occur only in three areas, while the rest of the Souttoufide belt is covered by Meso- to Cenozoic sediments. These areas are, from the south to the north, the Adrar Souttouf Massif, the Smara Zemmour area, and the western part of the Anti-Atlas. Because of the continuing processing and numerous publications, the Anti-Atlas cannot be dealt with in detail. Fundamental geological work in both of the other areas was mainly done during the second third of the 20th century, followed by several decades of inactivity. Numerous studies were done in the Adrar Souttouf massif during the last decade, while the Smara-Zemmour area still remains poorly investigated. Most of them were focused on geochronological analyses and geochemistry. Accordingly, the obtained data led to a new interpretation. The Adrar Souttouf is interpreted as a Pan-African belt exhibiting a Neoproterozoic island arc reworked by the Variscan collision between the North American Craton (NAC) and the West African Craton (WAC). The Smara-Zemmour area is considered as the external part of this Variscan belt thrusted onto the Palaeozoic Tindouf basin. The western Anti-Atlas as considered as a Pan-African active margin reworked during the Variscan orogen. Together, these three areas, lead to the hypothesis of a Late Pan-African belt capped by the Early and Middle Palaeozoic covers and then affected by the Middle Carboniferous tectonic event (330 Ma) related to the Pangaean assembly. Correlations with adjacent belts (Mauritanides and Anti-Atlas) are considered.
ISSN: 0899-5362

hal-01382815
https://hal.archives-ouvertes.fr/hal-01382815
DOI : 10.1016/j.jafrearsci.2015.04.016

Éditeur(s) : HAL CCSD
Résumé : National audience
Crustal-scale models for the Pyrenees based on ECORS reflection profileshave around 20 years now. In recent years, new understandingswere gained on the reconstruction to the preorogenic times, namelya scenario of extreme crustal attenuation and mantle exhumation ; inturn, this has implications on the interpretation of the present-day structure,as new models for the chain must consider feedbacks between themid-Cretaceous hyperextension and the Pyrenean inversion. On the WcentralPyrenean traverse, the southern part comprises 3 S-vergent basementthrust units, the Lakora, Gavarnie and Guarga units, flanked by thedetached cover of the Jaca piggyback basin and the Ebro basin, wherethe Mesozoic is thin and Late Cretaceous-Tertiary synorogenic carbonateand detrital sequences record a southward depocenter migration.To the N, the Chaînons Béarnais belt (CB) is a system of Jurassic to LowerCretaceous carbonate anticline ridges separated by synclines withthick Albian-Cenomanian flysch, covered to the north by Upper Cretaceousflysch sequences. The CB is thrust southwards together with theLakora thrust unit and northwards onto the Aquitaine basin. CB foldinglargely results from the rising and squeezing of diapirs initiated duringthe Jurassic-Early Cretaceous extension. Pieces of crust and mantle liftedin the diapirs attest that the CB derive from a Cretaceous domainof hyperextended continental crust and exhumed mantle. Moho reflectionsin the ECORS-Arzaq profile constrain the present deep structure.Restoration leads to a Mesozoic cover detachment over the N-Iberianand S-European margins. Inversion began by subduction of the exhumedmantle and folding and pop-up thrusting of the CB cover onto themargins. From the mid-late Eocene onwards, continental collision wasaccommodated by wedging and thrust stacking in the Iberian crust, involvingthe piggyback formation of S-vergent basement thrusts in theupper crust, and the northward subduction of the lower crust.
24 ème Réunion des sciences de la Terre 2014
Pau, France

insu-01080831
https://hal-insu.archives-ouvertes.fr/insu-01080831

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
In the Chalkidiki Peninsula of northern Greece a thrust complex made of a basement (Vertiskos Unit), a cover (Circum–Rhodope belt) and arc/back-arc units (Chortiatis Magmatic Suite and eastern Vardar Ophiolites) is exposed in the Chalkidiki Peninsula of northern Greece. The complex forms the western part of the Rhodope Metamorphic Province and lies on the hanging-wall of the Kerdylion Detachment, the structure responsible for the exhumation of the Southern Rhodope Core Complex and the most prominent and visible ductile structure related to the Tertiary Aegean extension. The Chalkidiki thrust complex arguably preserves a complete record of Cretaceous deformation and related fabrics. In this contribution we describe the geometry of foliation, stretching lineation and shear sense(s) on a regional scale. The regional foliation strikes NW–SE and displays different patterns in the three studied units: (i) dominantly dipping at low angle in the Vertiskos Unit, (ii) affected by upright folding in the Circum–Rhodope belt and (iii) systematically steeply dipping to the NE in the Chortiatis Magmatic Suite. Stretching lineation trend dominantly SW–NE in the three mentioned units. On the basis of new mapping, neglecting local perturbations and deformation related to Tertiary extension, we infer the regional kinematics of Cretaceous syn-metamorphic thrusting and subsequent exhumation of the metamorphic units. Thrusting took place toward the SW (in present-day coordination) and the related fabrics are recorded throughout the metamorphic pile. On the contrary, exhumation-related fabrics are related to shear toward the NE and are preferentially recorded in the uppermost part of the metamorphic pile suggesting that extension was more localised and of less finite intensity compared to thrusting.
ISSN: 0040-1951

insu-01231485
https://hal-insu.archives-ouvertes.fr/insu-01231485
DOI : 10.1016/j.tecto.2015.09.034

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
In fold and thrust belts drainage organization and patterns of sedimentation depend conceptually on the ability or not for preexisting reaches to incise uplifting thrust sheets. In this study we investigate experimentally the dynamics of drainage network in a wedge submitted to shortening and erosion. It allows us to reproduce and to monitor the interactions between tectonics, erosion and sedimentation during the development of up to five successive thrust sheets. In the experiments channels adjust to uplift rate by both increasing their slope and narrowing their channels as it is observed in nature. The series of experiments shows that the proportion of persistent preexisting transverse channels increases with the ratio of rainfall over shortening rates. The experiments confirm the view that the competition between discharge and tectonic uplift controls along-strike variations in sediment flux in sedimentary basins by controlling the drainage organization. If the transverse channels draining a wedge are not diverted, a line-source dispersal system develops in front of the active structure. If channels are diverted in the backlimb of the frontal structure it results in point-sourced depositional systems separated by areas fed only by small channels developing in the front of the wedge. Fans accumulated in front of the active structures reveal two stages of sedimentation, one of progradation, while the frontal structure is active and a second one of valley backfilling and thrust sealing during internal deformation of the wedge. The experiments also suggest that spatial variations in rock uplift rate along a thrust front may be evidenced by minimum-discharge variations of persistent transverse channels.
ISSN: 0040-1951

insu-01252482
https://hal-insu.archives-ouvertes.fr/insu-01252482
DOI : 10.1016/j.tecto.2015.09.007

Éditeur(s) : HAL CCSD
Résumé : 1 p.
International audience
The 12th May 2008 Wenchuan earthquake in the Longmen Shan occurred on a large thrust fault largely inherited from an Indosinian structure itself probably controlled by an older structural heritage of the South China block continental margin. Within the whole northeast Tibet region, such a structural inheritance has had a major impact on the Tertiary deformation. It appears of primary importance to assess the pre-Tertiary tectonic evolution of the main blocks involved to understand the actual deformation in the eastern edge of Tibet. Over the past decades, the Proterozoic to Cenozoic tectonic, metamorphic and geochronologic history of the Longmen Shan and Songpan Garzê area have been largely studied. We present a synthesis of the tectonic evolution of the Songpan Garzê fold and thrust belt from Triassic to present. The Songpan-Garzê belt was formed during closure of a wide oceanic basin ?lled with a thick (5 to 15 km) sequence of Triassic ?yschoid sediments. Closure of the basin due to Triassic subduction involved strong shortening, intense folding and faulting of the Triassic series. A large-scale décollement, that presently outcrops along the eastern boundary of the belt (Danba area), allowed the growth of a wide and thick accretionary wedge. It develops in the Paleozoic and Triassic series and separates the accretionary prism from an autochthonous crystalline basement which shares many similarities with the basement of the Yangtze Craton (0.7-0.9 Ga). To the north and northwest, below the thickened Triassic series of the belt, the composition (oceanic or continental) of the basement remains unknown. During the Indosinian orogeny the emplacement of orogenic granites (220 - 150 Ma) was associated to crustal thickening. The isotopic composition of granitoids shows that their magma source were predominantly derived from melting of the proterozoic basement with varying degrees of sedimentary material and negligible mantle source contribution. In the Danba area, the décollement outcrops in a large tertiary antiform with a NNW-SSE axis. It has been exhumed too in the hanging wall of the NE-SW faults of the Tertiary Longmen-Shan belt that marks the present day transition from the Tibetan plateau to the Sichuan basin. These faults have episodically absorbed signi?cant shortening since the Late Triassic. The amount and precise timing of post-triassic deformation are dif?cult to constrain especially because of the dif?culty to isolate the tertiary thermochronological signal from the protracted late Triassic - Cretaceous thermal history. Nonetheless it is generally accepted that Jurassic - Cretaceous tectonism did not modi?ed the general Triassic architecture of eastern Tibet contrarily to the Tertiary deformation. The long-term cooling histories obtained on Mesozoic granites and on the metamorphic series of the Danba dome are very similar showing a very slow and regular cooling during Jurassic andCretaceous, con?rming the absence of major tectonic event between c.a. 150 and 30 Ma. Low temperature thermochronology data indicate that ?nal exhumation and cooling occurred in theTertiary with an acceleration between 10 and 5 Ma along the major tectonic structures. Within the Longmen Shan range, a total denudation of 7 to 10 km is estimated for the late Cenozoic period. Similar amounts of late Tertiary denudation have been estimated along an east-west section across the Xianshuihe fault
Asian climate and tectonics seminar
Utrecht, Netherlands

insu-00610298
https://hal-insu.archives-ouvertes.fr/insu-00610298
DOI : 10.1016/j.jseaes.2010.03.008

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Gibraltar arc, spans a complex portion of the Africa-Eurasia plate boundary marked by slow oblique convergence and intermediate and deep focus seismicity. The seemingly contradictory observations of a young extensional marine basin surrounded by an arcuate fold-and-thrust belt, have led to competing geodynamic models (delamination and subduction). Geophysical data acquired in the past decade provide a test for these models and support a narrow east-dipping, subduction zone. Seismic refraction studies indicate oceanic crust below the western Gulf of Cadiz. Tomography of the upper mantle reveals a steep, east-dipping high P-wave velocity body, beneath Gibraltar. The anisotropic mantle fabric from SKS splitting shows arc-parallel "fast directions", consistent with toroidal flow around a narrow, westward retreating subducting slab. The accompanying WSW advance of the Rif-Betic mountain belt has constructed a thick pile of deformed sediments, an accretionary wedge, characterized by west-vergent thrust anticlines. Bathymetric swath‐mapping images an asymmetric embayment at the deformation front where a 2 km high basement ridge has collided. Subduction has slowed significantly since 5 Ma, but deformation of recent sediments and abundant mud volcanoes suggest ongoing activity in the accretionary wedge. Three possible origins for this deformation are discussed; gravitational spreading, overall NW-SE convergence between Africa and Iberia and finally a WSW tectonic push from slow, but ongoing roll-back subduction. In the absence of arc volcanism and shallow dipping thrust type earthquakes, evidence in favor of present-day subduction can only be indirect and remains the object of debate. Continued activity of the subduction offers a possible explanation for great (M > 8.5) earthquakes known to affect the area, like the famous 1755 Great Lisbon earthquake. Recent GPS studies show SW motion of stations in N Morocco at velocities of 3-6 mm/yr indicating the presence of an independent block, a "Rif-Betic-Alboran" microplate, situated between Iberia and Africa.
ISSN: 0040-1951

insu-00769762
https://hal-insu.archives-ouvertes.fr/insu-00769762
DOI : 10.1016/j.tecto.2012.08.038

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Gulf of Cadiz lies astride the complex plate boundary between Africa and Eurasia west of the Betic-Rif mountain belt. We report on the results of recent bathymetric swathmapping and multi-channel seismic surveys carried out here. The seafloor is marked by contrasting morphological provinces, spanning the SW Iberian and NW Moroccan continental margins, abyssal plains and an elongate, arcuate, accretionary wedge. A wide variety of tectonic and gravitational processes appear to have shaped these structures. Active compressional deformation of the wedge is suggested by folding and thrusting of the frontal sedimentary layers as well as basal duplexing in deeper internal units. There is evidence for simultaneous gravitational spreading occurring upslope. The very shallow mean surface and basal slopes of the accretionary wedge (1° each) indicate a very weak decollement layer, geometrically similar to the Mediterranean Ridge accretionary complex. Locally steep slopes (up to 10°) indicate strongly focused, active deformation and potential gravitational instabilities. The unusual surface morphology of the upper accretionary wedge includes “raft-tectonics” type fissures and abundant sub-circular depressions. Dissolution and/or diapiric processes are proposed to be involved in the formation of these depressions.
ISSN: 0264-8172

insu-00401683
https://hal-insu.archives-ouvertes.fr/insu-00401683
DOI : 10.1016/j.marpetgeo.2007.11.008

Éditeur(s) : HAL CCSD
Résumé : The evolution of mountain belt piedmont is controlled by interactions between tectonics, erosion and sedimentation. To study coupling between these processes, we analyze morphometric data collected in the eastern Tian Shan piedmont (NW China) and develop a new analogue modelling technique. The modeling approach uses an experimental set-up and analog material specifically designed to study simultaneously tectonic structures (faults, folds), detailed morphology (drainage basins, channels, alluvial fans, etc.) and stratified sedimentation. Measurement techniques based on laser interferometry and image correlation are also developed to quantify the topographic and kinematic evolution of models.
Our experiments allow a new approach for the study of piedmont morphotectonic evolution. Our results indicate that tectonics mainly controls this evolution. The propagation of deformation and the formation of relief both significantly influence the development of drainage networks, the evolution of drainage basins and the formation of morphotectonic markers. Particularly, a study of alluvial fans and watershed metrics suggests that there is a dynamical equilibrium between uplift, erosion and morphology. In addition, our results show that terrace nucleation is controlled by thrust activity and hydrography adjustments. Folding of terraces responds to a homothetic deformation pattern.
This new methodology brings promising perspectives in the fields of geomorphology, seismotectonics and sedimentology.
L'évolution d'un piémont de chaîne de montagnes est contrôlée par les interactions entre la tectonique, l'érosion et la sédimentation. Pour étudier ces processus, nous avons analysé des données morphométriques issues des piémonts orientaux du Tian Shan (NW Chine) et développé un nouveau type de modélisation analogique. Cette approche utilise un dispositif et un matériau expérimental spécialement conçus pour modéliser simultanément des structures tectoniques (failles, plis), une morphologie détaillée (bassins versants, rivières, cônes alluviaux, etc.) et une sédimentation stratifiée. Des techniques de mesure optique ont été également mises en oeuvre afin de quantifier l'évolution topographique et cinématique des modèles.
Les expériences réalisées offrent une opportunité inédite d'étudier l'évolution morphotectonique d'un piémont. Nos résultats montrent que la tectonique exerce un contrôle de premier ordre sur cette évolution. La propagation de la déformation et la formation des reliefs influencent en effet significativement le développement du réseau de drainage, l'évolution des bassins versants et la formation des marqueurs morphotectoniques. En particulier, l'analyse de la morphométrie des cônes alluviaux et de leurs bassins versants suggère qu'un équilibre dynamique s'installe entre la surrection, l'érosion et la morphologie. Nos résultats montrent également que l'apparition des terrasses est guidée par l'activité des chevauchements et les adaptations de l'hydrographie. Leur modèle de plissement répond à une déformation homothétique.
Cette nouvelle approche ouvre des perspectives d'étude prometteuses en géomorphologie, sismotectonique et stratigraphie.
https://tel.archives-ouvertes.fr/tel-00339145

tel-00339145
https://tel.archives-ouvertes.fr/tel-00339145
https://tel.archives-ouvertes.fr/tel-00339145v2/document
https://tel.archives-ouvertes.fr/tel-00339145/file/These_Graveleau08.pdf

Éditeur(s) : HAL CCSD
Résumé : In order to identify and quantify the Rif (Morocco) present-day deformation, especially those related to active faults (location, geometry, kinematic), we perform a morphotectonic study. The studied area and faults are located in the Northern part (conjugate faults of Al-Hoceima Bay: Trougout, Boujibar and Rouadi), the Eastern part (Nekor fault) and the Southern part of the chain (Rif frontal thrust between Fes and Meknes cities).Morphotectonic tools (DEMs at different scales, satellite and aerial pictures), field studies and Quaternary dating methods (U/Th, OSL, 14C and in-situ cosmogenic isotopes 10Be, 3He, 36Cl) allow us to characterize transtensional deformation in the Northern Rif. Horizontal and vertical slip rates along the N-S-oriented Trougout major fault are ~1.6 mm/yr and ~2 mm/yr respectively. In the Southern part, the Rif frontal thrust shows a shortening rate of ~1.8 mm/yr into Fes and Meknes area. In the Eastern part, the deformation is focused on the Nekor left-lateral strike-slip major fault with ~1.5 mm/yr. Incision features and raised marine terraces involve an uplift of the chain about ~0.2 mm/yr. The overall deformation in the Rif seems to be continuous since the Messinian-Pliocene time.These new morphotectonic constraints are consistent with the GPS measurements showing southwestward overall motion of most of the Rif belt with respect to stable Africa, associated to clockwise rotation. Finally, we propose a geodynamic model in which the Rif, the Alboran sea and the Betics belong to a single microplate bounded by the strike-slip faults of the Betics on the North, the Rif frontal thrust on the South, the Nekor and TASZ (Trans Alboran Shear Zone) strike-slip faults on the East and North-East, and the western Rif folded structures on the West.
L'objectif de cette étude est d'identifier et de quantifier les déformations actuelles dans la chaine du Rif (Maroc), notamment celles associées aux failles actives (localisation, géométrie, cinématique). Pour ce faire, nous mettons en œuvre pour la première fois dans cette région, une approche morphotectonique. Les sites et failles sélectionnés et étudiés se situent dans la partie Nord (les failles conjuguées de la baie d'Al-Hoceima: Trougout, Boujibar et Rouadi), l'Est (la faille de Nékor) et le Sud (front chevauchant sud rifain entre Fes et Meknes).A partir des outils de la morphotectonique (MNTs à différentes résolutions, images satellitaires, photographies aériennes), d'analyses de terrain et grâce aux méthodes de datation du Quaternaire (U/Th, OSL, 14C et isotopes cosmogéniques produits in-situ 10Be, 3He, 36Cl), cette étude met en évidence et quantifie une déformation transtensive dans la partie Nord de la chaine. Les vitesses de glissement horizontales et verticales le long de la faille principale d'orientation méridienne de Trougout sont de ~1.6 mm/an et ~2 mm/an, respectivement. Dans la partie Sud, nous montrons que le front rifain entre Fez et Meknes est actif avec une vitesse de raccourcissement de ~1.8 mm/an. La déformation dans la région Est se localise principalement sur la faille du Nékor avec une vitesse décrochante senestre de ~1.5 mm/an. Par ailleurs, la présence de nombreuses figures d'incision et de surfaces marines soulevées au niveau du littoral Nord témoignent d'une surrection généralisée de la chaine de l'ordre de ~0.2 mm/an. L'ensemble de cette déformation semble être constante depuis la période du Messino-Pliocène. Ces résultats sont cohérents avec les données GPS qui montrent un déplacement de ~5mm/an vers le SW de l'ensemble du Rif associé à un mouvement rotatif horaire, dans le référentiel Afrique stable. D'un point de vue géodynamique, nous proposons que le Rif, la mer d'Alboran et les Bétiques appartiennent à une même microplaque limitée au Nord par les failles décrochantes des Bétiques, au Sud par le chevauchement rifain, à l'Est et au Nord-Est par les failles décrochantes de Nékor et de la TASZ (Trans Alboran Shear Zone) et à l'Ouest par les structures plissées bordières du Rif.
https://tel.archives-ouvertes.fr/tel-01170466

NNT : 2014MON20105
tel-01170466
https://tel.archives-ouvertes.fr/tel-01170466
https://tel.archives-ouvertes.fr/tel-01170466v2/document
https://tel.archives-ouvertes.fr/tel-01170466/file/41875_POUJOL_2014_archivage_cor.pdf

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The detailed morphology and internal structure of the Calabrian accretionary wedge and adjacent Eastern Sicily margin are imaged in unprecedented detail by a combined dataset of multi-beam bathymetry and high-resolution seismic profiles. The bathymetric data represent the results of 6 recent marine geophysical surveys since 2010 as well as a compilation of earlier surveys presented as a 2 arc-sec (60 m) grid. Several distinct morpho-tectonic provinces are identified including: the deeply incised Malta–Hyblean Escarpment, numerous submarine canyons, broad regions of relatively flat seafloor dominated by fields of sediment waves, the gently undulating anticlinal fold-and-thrust belts of the external Calabrian accretionary wedge and the adjacent portion of the Western Mediterranean Ridge. The Calabrian arc can be divided into 4 domains (from SE to NW): 1) the undeformed Ionian abyssal plain, 2) the external evaporitic wedge, 3) the internal clastic wedge, 4) the Calabrian backstop (Variscan crystalline basement). The Calabrian accretionary wedge can also be divided laterally into two major lobes, the NE- and the SW lobes, and two minor lobes. The kinematics of the limit between the two major lobes is investigated and shown to be sinistral in the external (evaporitic) wedge. A network of radial slip lines within the southernmost external wedge unequivocally demonstrate ongoing dextral displacement of a rigid indenter (representing the corner of the clastic wedge) into the evaporitic wedge thereby confirming the geodynamic model of an active lateral slab tear fault here off eastern Sicily. The slab tear produces a series of major sub-parallel dextral strike-slip faults offshore Mt. Etna and south of the Straits of Messina consistent with the relative motions between Calabria and the Peloritan domain (NE Sicily). Abundant strike-slip faulting, and wide-spread folding and thrusting observed throughout the entire accretionary wedge, indicate regional shortening between the Ionian abyssal plain (foreland) and the Calabrian–Peloritan backstop caused by active subduction.
ISSN: 0012-821X

hal-01523990
https://hal.archives-ouvertes.fr/hal-01523990
DOI : 10.1016/j.epsl.2016.12.020