Éditeur(s) : HAL CCSD
Résumé : International audience
This article describes a previously unreported mutation at position 210 (C210T) of the mitochondrial large subunit ribosomal RNA (mtLSUrRNA) gene of Pneumocystis jirovecii, which led to a false-negative result of a real-time polymerase chain reaction (PCR) assay. Since the aforementioned real-time PCR assay is widely used in France, a French multicenter study was conducted to estimate the mutation frequency and its potential impact on the routine diagnosis of Pneumocystis pneumonia (PCP). Through analysis of data obtained from eight centers, the mutation frequency was estimated at 0.28%. This low frequency should not call into question the routine use of this PCR assay. Nonetheless, the occurrence of the false-negative PCR result provides arguments for maintaining microscopic techniques combined to PCR assays to achieve PCP diagnosis.
Medical Mycology

hal-01477200
https://hal-univ-rennes1.archives-ouvertes.fr/hal-01477200
DOI : 10.1093/mmy/myw051
PUBMED : 27489302

Éditeur(s) : HAL CCSD
Résumé : International audience
o abstract
Revue Des Maladies Respiratoires

hal-01647782
https://hal-univ-rennes1.archives-ouvertes.fr/hal-01647782
DOI : 10.1016/j.rmr.2017.07.017
PUBMED : 28939155

Éditeur(s) : HAL CCSD Springer Verlag (Germany)
Résumé : International audience
Surface displacements due to temporal changes in environmental mass redistributions are observable in the coordinate time series of many Global Navigation Satellite System (GNSS) sites. In this study, we investigated the effect of loading on estimates of tectonic velocity computed from campaign-style GNSS observations. The study region is in the Pyrenees mountain range between France and Spain (ResPyr campaigns). In this area, seismic activity is continuous and moderate and the expected amplitude of the horizontal tectonic velocity is less than 0.5 mm/yr. In order to determine the velocity, 4 sparse GNSS campaigns were carried out from 1995 to 2010. Considering this small rate of deformation, loading phenomena can contribute a non-negligible artifact to the velocity computation that could affect our geodynamical interpretation. In this investigation, we specifically considered the atmospheric, hydrological, and non-tidal ocean loading phenomena. The computed loading deformations for this region show the horizontal displacements are dominated by the non-tidal ocean loading (maximum 4 mm for the North and 3.1 mm for the East components); the main vertical contributions are due to the atmospheric and continental water storage loading (maximum 14.3 for the atmosphere and 8.1 mm for the hydrology, respectively). We have found that the dominant loading effect on the horizontal velocity is the non-tidal ocean loading (mean of 0.11 mm/yr), whereas the vertical component is dominated by the hydrological loading (mean of 0.21 mm/yr). Since the study area is in a mountainous region, we also analyzed the difference between the atmospheric and the topography dependent atmospheric loading models at our GNSS campaign sites. We did not find any significant difference between the two atmospheric loading models in terms of horizontal velocity. Finally, we performed simulations to identify the optimum timing and frequency of future GNSS campaigns in this area that would minimize the loading effects on tectonic velocity estimates.
ISSN: 0039-3169

hal-00963629
https://hal.archives-ouvertes.fr/hal-00963629
DOI : 10.1007/s11200-012-0458-2

Éditeur(s) : HAL CCSD
Résumé : International audience
o abstract
Revue Des Maladies Respiratoires

hal-01647076
https://hal-univ-rennes1.archives-ouvertes.fr/hal-01647076
DOI : 10.1016/j.rmr.2017.07.022
PUBMED : 28935495

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : GPS velocities and seismicity across the Betic-Rif Arc structural domains (Morocco and Iberia) provide a basis to evaluate present-day seismotectonic processes between different deformation belts. The results show asymmetric movements in the complex Alboran system accommodating the convergence between the African (Nubian) and Eurasian plates. While the Betic Mountains are attached to Iberia, moving toward the southeast with respect to Africa, the Rif is divided into three blocks with distinct displacements relative to Nubia: (1) the Tangier block moving southeastward, (2) the Central Rif block moving SSW, and (3) the Oriental Rif block undergoing clockwise rotation. GPS-derived motions decrease in rate from the Rif nappes complex to the foreland.
ISSN: 0010-7999

hal-00411144
https://hal.archives-ouvertes.fr/hal-00411144
DOI : 10.1016/j.crte.2008.02.003

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We use velocities from 65 continuous stations and 31 survey-mode GPS sites as well as kinematic modeling to investigate present day deformation along the Africa-Iberia plate boundary zone in the western Mediterranean region. The GPS velocity field shows southwestward motion of the central part of the Rif Mountains in northern Morocco with respect to Africa varying between 3.5 and 4.0 mm/yr, consistent with prior published results. Stations in the southwestern part of the Betic Mountains of southern Spain move west-southwest with respect to Eurasia (similar to 2-3 mm/yr). The western component of Betics motion is consistent with partial transfer of Nubia-Eurasia plate motion into the southern Betics. The southward component of Betics motion with respect to Iberia is kinematically consistent with south to southwest motion of the Rif Mountains with respect to Africa. We use block modeling, constrained by mapped surface faults and seismicity to estimate the geometry and rates of strain accumulation on plate boundary structures. Our preferred plate boundary geometry includes one block between Iberia and Africa including the SW Betics, Alboran Sea, and central Rif. This geometry provides a good fit to the observed motions, suggesting a wide transpressive boundary in the westernmost Mediterranean, with deformation mainly accommodated by the Gloria-Azores fault system to the West and the Rif-Tell lineament to the East. Block boundaries encompass aspects of earlier interpretations suggesting three main deformation styles: (i) extension along the NE-SW trending Trans-Alboran shear zone, (ii) dextral strike-slip in the Betics corresponding to a well defined E-W seismic lineament, and (iii) right lateral strike-slip motion extending West to the Azores and right-lateral motion with compression extending East along the Algerian Tell. We interpret differential motion in the Rif-Alboran-Betic system to be driven both by surface processes related the Africa-Eurasia oblique convergence and sub-crustal dynamic processes associated with the long history of subduction of the Neotethys ocean lithosphere. The dextral slip identified in the Betic Mountains in Southern Spain may be related to the offshore fault that produced the Great 1755 Lisbon Earthquake, and as such may represent a significant seismic hazard for the West Mediterranean region.
ISSN: 0012-821X

hal-00618337
https://hal.archives-ouvertes.fr/hal-00618337
DOI : 10.1016/j.epsl.2011.05.048

Éditeur(s) : HAL CCSD Oxford University Press (OUP): Policy P - Oxford Open Option A Oxford University Press (OUP)
Résumé : International audience
The Pyrenean mountain range is a slowly deforming belt with continuous and moderate seismic activity. To quantify its deformation field, we present the velocity field estimated from a GPS survey of the Pyrenees spanning 18 yr. The PotSis and ResPyr networks, including a total of 85 GPS sites, were installed and first measured in 1992 and 1995–1997, respectively, and remeasured in 2008 and 2010. We obtain a deformation field with velocities less than 1 mm yr−1 across the range. The estimated velocities for individual stations do not differ significantly from zero with 95 per cent confidence. Even so, we estimate a maximum extensional horizontal strain rate of 2.0 ± 1.7 nanostrain per year in a N–S direction in the western part of the range. We do not interpret the vertical displacements due to their large uncertainties. In order to compare the horizontal strain rates with the seismic activity, we analyse a set of 194 focal mechanisms using three methods: (i) the ‘r’ factor relating their P and T axes, (ii) the stress tensors obtained by fault slip inversion and (iii) the strain-rate tensors. Stress and strain-rate tensors are estimated for: (i) the whole data set, (ii) the eastern and western parts of the range separately, and (iii) eight zones, which are defined based on the seismicity and the tectonic patterns of the Pyrenees. Each of these analyses reveals a lateral variation of the deformation style from compression and extension in the east to extension and strike-slip in the west of the range. Although the horizontal components of the strain-rate tensors estimated from the seismic data are slightly smaller in magnitude than those computed from the GPS velocity field, they are consistent within the 2σ uncertainties. Furthermore, the orientations of their principal axes agree with the mapped active faults.
ISSN: 0956-540X

hal-01171752
https://hal.archives-ouvertes.fr/hal-01171752
DOI : 10.1093/gji/ggv052

Éditeur(s) : HAL CCSD Geological Society of America
Résumé : International audience
We present the results of dynamic modeling of the western Mediterranean that accounts for observed global positioning system (GPS) surface deformation of the Alboran Sea and surrounding Rif and Betic Mountains as the result of the combined effects of relative motion of the Eurasian and Nubian plates, low strength in the Alboran Sea region and sub-lithospheric processes occurring beneath the External Rif domain. Assuming that the lithosphere behaves elastically over the short time period of the GPS observations, an elastic plate model is considered in our study, including an area of weak lithosphere (factor of 10) centered on the Alboran Sea and in which lateral boundary conditions consist of the Nubia-Eurasia oblique convergence. Sub-crustal processes are modeled by application of a horizontal traction on a small area (patch) at the base of the elastic plate. Our modeling studies demonstrate the need for sub-crustal or sub-lithospheric, southwestward-directed forcing to account for observed southwestward motion of the Rif and Betic domains. Based on the location, orientation, and small area of the traction patch, we hypothesize that forcing is associated with delamination and rollback of the subducted African continental lithospheric mantle beneath the External Rif zone, due to the pull of the oceanic part of the Western Mediterranean slab, a dynamic process that may be similar to that where the over-riding plate is driven toward the subduction zone during slab rollback.
ISSN: 0091-7613

hal-00524546
https://hal.archives-ouvertes.fr/hal-00524546
DOI : 10.1130/G30963.1

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : Approximately 4 yr of campaign and continuous Global Positioning System (GPS) measurements across the Dead Sea fault system (DSFS) in Lebanon provide direct measurements of interseismic strain accumulation along a 200-km-long restraining bend in this continental transform fault. Late Cenozoic transpression within this restraining bend has maintained more than 3000 m of topography in the Mount Lebanon and Anti-Lebanon ranges. The GPS velocity field indicates 4-5 mm yr(-1) of relative plate motion is transferred through the restraining bend to the northern continuation of the DSFS in northwestern Syria. Near-field GPS velocities are generally parallel to the major, left-lateral strike-slip faults, suggesting that much of the expected convergence across the restraining bend is likely accommodated by different structures beyond the aperture of the GPS network (e.g. offshore Lebanon and, possibly, the Palmyride fold belt in SW Syria). Hence, these geodetic results suggest a partitioning of crustal deformation involving strike-slip displacements in the interior of the restraining bend, and crustal shortening in the outer part of the restraining bend. Within the uncertainties, the GPS-based rates of fault slip compare well with Holocene-averaged estimates of slip along the two principal strike-slip faults: the Yammouneh and Serghaya faults. Of these two faults, more slip occurs on the Yammouneh fault, which constitutes the primary plate boundary structure between the Arabia and Sinai plates. Hence, the Yammouneh fault is the structural linkage that transfers slip to the northern part of the transform in northwestern Syria. From the perspective of the regional earthquake hazard, the Yammouneh fault is presently locked and accumulating interseismic strain.
ISSN: 0956-540X

hal-00406620
https://hal.archives-ouvertes.fr/hal-00406620
DOI : 10.1111/j.1365-246X.2006.03328.x

Éditeur(s) : HAL CCSD Nature Publishing Group
Résumé : International audience
Collisional mountain belts grow as a consequence of continental plate convergence and eventuallydisappear under the combined effects of gravitational collapse and erosion. Using a decade ofGPS data, we show that the western Alps are currently characterized by zero horizontal velocityboundary conditions, offering the opportunity to investigate orogen evolution at the time ofcessation of plate convergence. We find no significant horizontal motion within the belt, but GPS andlevelling measurements independently show a regional pattern of uplift reaching ~2.5 mm/yr in thenorthwestern Alps. Unless a low viscosity crustal root under the northwestern Alps locally enhancesthe vertical response to surface unloading, the summed effects of isostatic responses to erosion andglaciation explain at most 60% of the observed uplift rates. Rock-uplift rates corrected from transientglacial isostatic adjustment contributions likely exceed erosion rates in the northwestern Alps. In theabsence of active convergence, the observed surface uplift must result from deep-seated processes.
ISSN: 2045-2322

hal-01357450
https://hal.archives-ouvertes.fr/hal-01357450
https://hal.archives-ouvertes.fr/hal-01357450/document
https://hal.archives-ouvertes.fr/hal-01357450/file/noquet2016.pdf
DOI : 10.1038/srep28404

Éditeur(s) : HAL CCSD
Résumé : When the upper crust below the mountain ranges shows crustal extension with a direction collinear to the convergence direction, it is generally accepted that it is the result of gravitational collapse. However, recent studies challenge this paradigm by showing that erosion induces uplift and extension in the central part of the low convergent mountain ranges. In this study, we investigate the impact of denudation on the seismotectonic regime of mountain ranges.In order to identify a relationship between seismotectonic regime and erosion, the first part of this work presents a compilation of data in the mountain ranges. Based on these observations, a simple kinematic model is proposed to predict the seismotectonic regime of the study ranges.For low convergence rate and moderate mean elevation ranges, this model predicts an extension regime when the denudation rate is 15% higher than the convergence rate.The second part is devoted to the development of thermomechanical 2D finite element models to study the impact of surface processes on the deformation of the Pyrenees. The results show that the isostatic response to erosion reactivates pre-existing structures. The kinematics of an inherited fault plane can be predicted due to the gradient of the horizontal surface velocity profile. Thus, a plane located in the eroded zone is reactivated in normal fault when near the border of the erosion area, this same plane is reactivated in reverse fault. These results suggest that the current deformation in the North Pyrenean Zone could be the result of surface processes.Given the small number of studies quantifying erosion rates in the Pyrenees, the models developed in the second part suffer from high uncertainty. To remedy this, we study the central Pyrenees through a study that combines two types of data : watershed denudation rates from cosmogenic isotopes concentration, and incision rates from sediments buried in the karst. These results are presented in chapter 3. Denudation profiles obtained are consistent with reactivation of a normal fault plane located in the North Zone of the Central Pyrenees.From our study in the Pyrenees, a good correlation appears between the value of the rate of erosion and the glacier occupation. Given that the glaciers where more developed in the Alps, it raises the question of the impact of the late-würmian deglaciation on the present deformation of this range. A numerical model detailing this relationship is presented in the fourth chapter. Theresults show that deglaciation of the western Alps is controlled by the rheological heterogeneity of the crust. Some of our models predict uplift rates consistent with those highlighted by geodesy.
Lorsque l’extension de la croûte sous les parties hautes des chaînes de montagnes est colinéaire à la direction de convergence, il est traditionnellement admis que le moteur est l’effondrement gravitaire. Pourtant, des études récentes remettent en cause ce paradigme en montrant que l’érosion induit un soulèvement et de l’extension dans la partie centrale des chaînes de montagne à faible taux de convergence. L’objectif de notre étude est d’étudier l’impact de la dénudation de la topographie sur le régime sismo-tectonique des chaînes de montagnes.La première partie de ce travail présente une compilation de données dans les chaînes de montagnes afin de dégager des relations entre régime sismo-tectonique et érosion. Sur la base de ces observations, un modèle cinématique simple permettant de prévoir le régime de la chaîne est proposé. Ainsi, pour les chaînes à faible taux de convergence et d’élévation moyenne, ce modèleprédit de l’extension lorsque le taux de dénudation est 15% plus élevé que le taux de convergence.La deuxième partie est consacrée au développement d’un modèle thermo-mécanique 2D en éléments finis pour étudier l’impact des processus de surface sur la déformation des Pyrénées.Les résultats montrent que la réponse isostatique à l’érosion permet de réactiver des structurespré-existantes. La cinématique d’un plan de faille hérité peut être prédite grâce au gradient du profil des vitesses de surface horizontales. Ainsi, un plan situé dans la zone d’érosion est réactivé en faille normale alors qu’en bordure de cette zone une faille est réactivée en régime inverse. Ces résultats suggèrent que la déformation actuelle des Pyrénées pourrait être la conséquence d’unprocessus d’érosion.Compte tenu du faible nombre d’études quantifiant les taux d’érosion dans les Pyrénées, les modèles développés dans la deuxième partie souffrent d’une forte incertitude. Pour y remédier, nous avons cherché à les quantifier dans les Pyrénées Centrales grâce à une étude qui combine deux types de données : taux de dénudation des bassins versants à partir des isotopes cosmogéniques, et vitesses d’incision à partir des sédiments piégés dans les karsts. Ces résultats sontprésentés dans la troisième partie. Les profils de dénudation obtenus sont compatibles avec unrejeu en faille normale d’un plan situé dans la Zone Nord Pyrénéenne des Pyrénées Centrales.Notre étude dans les Pyrénées, montre une bonne corrélation entre la valeur du taux d’érosion et la cartographie de l’occupation glaciaire. Les glaciers ayant été plus développés dans les Alpes, cela pose la question de l’impact de la déglaciation tardi-Wurmienne sur la déformation actuelle de cette chaîne. Un modèle numérique détaillant cette relation est présenté dans le quatrième chapitre. Les résultats montrent que la déglaciation des Alpes occidentales est contrôléepar l’hétérogénéité rhéologique de la croute. Certains de nos modèles prédisent des vitesses de surrection compatibles avec celles mises en évidence par la géodésie.
https://hal.archives-ouvertes.fr/tel-01262333

tel-01262333
https://hal.archives-ouvertes.fr/tel-01262333
https://hal.archives-ouvertes.fr/tel-01262333/document
https://hal.archives-ouvertes.fr/tel-01262333/file/these-Genti-2015-postjury.pdf

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Betic-Rif orocline surrounding the Alboran Sea, the westernmost tip of the Mediterranean Sea, accommodates the NW–SE convergence between the Nubia and Eurasia plates. Recent GPS observations indicate a ∼4 mm/yr SW motion of the Rif Mountains, relative to stable Nubia, incompatible with a simple two-plate model. New gravity data acquired in this study define a pronounced negative Bouguer anomaly south of the Rif, interpreted as a ∼40 km-thick crust in a state of non-isostatic equilibrium. We study the correlation between these present-day kinematic and geodynamic processes using a finite-element code to model in 2-D the first-order behavior of a lithosphere affected by a downward normal traction (representing the pull of a high-density body in the upper mantle). We show that intermediate viscosities for the lower crust and uppermost mantle (View the MathML source1021–1022Pas) allow an efficient coupling between the mantle and the base of the brittle crust, thus enabling (1) the conversion of vertical movement, resulting from the downward traction, to horizontal movement and (2) shortening in the brittle upper crust. Our results show that incipient delamination of the Nubian continental lithosphere, linked to slab pull, can explain the present-day abnormal tectonics, contribute to the gravity anomaly observed in northern Morocco, and give insight into recent tectonics in the Western Mediterranean region.
ISSN: 0012-821X

hal-01467130
https://hal.archives-ouvertes.fr/hal-01467130
DOI : 10.1016/j.epsl.2016.08.041

Éditeur(s) : HAL CCSD
Résumé : International audience
o abstract
Revue Des Maladies Respiratoires

hal-01647079
https://hal-univ-rennes1.archives-ouvertes.fr/hal-01647079
DOI : 10.1016/j.rmr.2017.07.019
PUBMED : 28939154

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
A network of continuous GPS stations has been installed in NW Iran since 2005 to complement the survey GPS network already existing in the region. We present the 1999-2009 GPS-derived velocity field for this region based on the continuous and survey-mode observations. The results confirm a right lateral slip of 7 +/- 1 mm/yr for the North Tabriz fault, in agreement with previous studies. This rate is consistent with earthquakes of magnitude 7-7.3 and recurrence times of 250-300 yr. The higher spatial coverage of the new network shows that deformation is localized in the vicinity of the Chalderan, south Gailatu-Siah Cheshmeh-Khoy fault and the North Tabriz fault. However the eastern end of the North Tabriz fault appears to cross Mount Bozgush rather than following its southern foothills. This new velocity field does not indicate the 8 mm/yr of NNE-SSW extension suggested earlier for the region, but rather shows lower extension of 1-2 +/- 1 mm/yr across the eastern segment of the North Tabriz fault and the Talesh. To the west, the Chalderan and the western North Tabriz fault segment act like pure strike slip faults without significant extension or compression. The denser network in the Rudbar earthquake region (Ms 7.3, 1992) shows no significant motion across the fault, suggesting that the recurrence time of earthquakes like the Rudbar event must be very long. The lack of substantial compressive strain and the sharp azimuth change of the velocity vectors in the transition zone from Arabia to Lesser Caucasus motion imply that processes other than "extrusion", possibly related to old subduction or delamination, contribute to active deformation.
ISSN: 0012-821X

hal-00617666
https://hal.archives-ouvertes.fr/hal-00617666
DOI : 10.1016/j.epsl.2011.04.029

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We present evidence that GPS velocity estimates of plate motions and fault slip rates agree to within uncertainties with geologic estimates during the most recent phase of the geologic evolution of the E Mediterranean region (post-Late Miocene). On this basis, we use the GPS differential velocities to estimate the timing of initiation of the principal structures in NW Turkey, the N Aegean Sea, and central Greece, including, the Marmara Sea, the Gulfs of Evia (GoE) and Corinth (GoC). and the Kephalonia Transform fault (KTF). We interpret these ages to indicate that the North Anatolian fault propagated across the N Aegean, opening the GoE and GoC and initiating the KTF, during the past 1-4 Ma. We further suggest that Aegean extension that was earlier more distributed across the Aegean Basin became focused on this new fault system allowing the southern Aegean and Peloponnisos to translate SW with little internal deformation, as observed today with GPS. This change in tectonic configuration may account for the clear geologic evidence for crustal thinning throughout the S Aegean in apparent contradiction with low present-day strain rates. We further show that the low present-day strain rate along the southern edge of the Aegean micro-plate requires substantial aseismic slip along the plate interface below Crete, consistent with the low level of historic, subduction-type earthquakes along this segment of the subduction zone.
ISSN: 0040-1951

hal-00512634
https://hal.archives-ouvertes.fr/hal-00512634
DOI : 10.1016/j.tecto.2009.05.027

Éditeur(s) : HAL CCSD Elsevier Masson
Résumé : Normal faulting mechanisms observed in the northern foothills of the Central–Western Pyrenees are remarkable, since one expects thrust faults at a convergent plate boundary. To understand the mechanisms involved, we used numerical modeling and investigated the impact of the following processes: gravitational potential energy associated with topography and dense crustal blocks; isostatic compensation in response to denudation and/or sedimentation. To decipher the effects of each process, we designed three model geometries and added a pre-existing weak fault where most of the seismicity occurs. To evaluate our model results, we derived the fault slip rate from the focal mechanisms in the region where we have the fault in our model. We found a slip rate of ∼15 m/Ma, which is in agreement with our modelling results. We conclude that flexural rebound induced by surface processes is able to explain the seismicity in Central–Western Pyrenees.
ISSN: 1631-0713

hal-01346028
https://hal.archives-ouvertes.fr/hal-01346028
https://hal.archives-ouvertes.fr/hal-01346028/document
https://hal.archives-ouvertes.fr/hal-01346028/file/Genti.pdf
DOI : 10.1016/j.crte.2015.08.004

Éditeur(s) : HAL CCSD
Résumé : International audience
We present a new 3-D GPS velocity solution for 182 sites for the region encompassing the Western Alps, Pyrenees, and southern France. The velocity field is based on a Precise Point Positioning (PPP) solution, to which we apply a common-mode filter, defined by the 26 longest time series, in order to correct for network-wide biases (reference frame, unmodeled large-scale processes, etc.). We show that processing parameters, such as troposphere delay modeling, can lead to systematic velocity variations of 0.1–0.5 mm yr−1 affecting both accuracy and precision, especially for short (< 5 years) time series. A velocity convergence analysis shows that minimum time-series lengths of  ∼  3 and  ∼  5.5 years are required to reach a velocity stability of 0.5 mm yr−1 in the horizontal and vertical components, respectively. On average, horizontal residual velocities show a stability of  ∼  0.2 mm yr−1 in the Western Alps, Pyrenees, and southern France. The only significant horizontal strain rate signal is in the western Pyrenees with up to 4  ×  10−9 yr−1 NNE–SSW extension, whereas no significant strain rates are detected in the Western Alps (< 1  ×  10−9 yr−1). In contrast, we identify significant uplift rates up to 2 mm yr−1 in the Western Alps but not in the Pyrenees (0.1 ± 0.2 mm yr−1). A correlation between site elevations and fast uplift rates in the northern part of the Western Alps, in the region of the Würmian ice cap, suggests that part of this uplift is induced by postglacial rebound. The very slow uplift rates in the southern Western Alps and in the Pyrenees could be accounted for by erosion-induced rebound.
ISSN: 1869-9529

hal-01395116
https://hal.archives-ouvertes.fr/hal-01395116
https://hal.archives-ouvertes.fr/hal-01395116/document
https://hal.archives-ouvertes.fr/hal-01395116/file/nguyen2016.pdf
DOI : 10.5194/se-7-1349-2016

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We develop a block model for the Aegean and surrounding areas, constrained by Global Positioning System (GPS), in order to investigate the degree of coupling on the Hellenic subduction interface (i.e., the fraction of the motion across the plate boundary accommodated by elastic strain accumulation). We use previously published models, and seismicity to define the geometry of the interface separating the down-going Nubian slab from the overriding Aegean. This model provides a good fit to the GPS observations; for the ∼200,000 km2 Aegean block the wrms of the residual velocities is 1.4 mm/yr for 80 GPS velocity estimates, approximately the 95% level of the GPS velocity uncertainties. We investigate the degree of coupling on the seismically active plate interface, the Hellenic trench splay fault (believed to be the source of the 365 AD Great Crete Earthquake and Tsunami), and the Kephalonia transform fault by comparing the modeled GPS residual velocity field for a range of coupling values. The GPS observations are almost insensitive to coupling on the Kephalonia transform fault, because of the vertical dip of the fault that creates interseismic deformation only close to the fault where few GPS sites exist. The absence of resolvable shortening of the leading edge of the Aegean Plate precludes coupling of more than 0.2 (20% of the full Nubia-Aegean convergence rate) on the modeled plate interface. Because of the shallow dip of the plate interface and trench splay fault, and high rate of convergence, if these boundaries were fully coupled, high elastic strain rates would be expected to extend well into the overriding Aegean plate. Based on our preferred value for the degree of coupling (0.1), and assuming characteristic earthquake behavior, we estimate a recurrence time for great earthquakes with slip similar to that for the 365 Crete event of 5700-8300 yr, consistent with the absence of subsequent great earthquakes on this segment of the subduction zone.
ISSN: 0012-821X

hal-01053486
https://hal.archives-ouvertes.fr/hal-01053486
DOI : 10.1016/j.epsl.2013.10.018

Éditeur(s) : HAL CCSD American Geophysical Union (AGU) American Geophysical Union
Résumé : International audience
GPS data reveal that the Brahmaputra Valley has broken from the Indian Plate and rotates clockwise relative to India about a point a few hundred kilometers west of the Shillong Plateau. The GPS velocity vectors define two distinct blocks separated by the Kopili fault upon which 2–3 mm/yr of dextral slip is observed: the Shillong block between longitudes 89 and 93°E rotating clockwise at 1.15°/Myr and the Assam block from 93.5°E to 97°E rotating at ≈1.13°/Myr. These two blocks are more than 120 km wide in a north-south sense, but they extend locally a similar distance beneath the Himalaya and Tibet. A result of these rotations is that convergence across the Himalaya east of Sikkim decreases in velocity eastward from 18 to ≈12 mm/yr and convergence between the Shillong Plateau and Bangladesh across the Dauki fault increases from 3 mm/yr in the west to >8 mm/yr in the east. This fast convergence rate is inconsistent with inferred geological uplift rates on the plateau (if a 45°N dip is assumed for the Dauki fault) unless clockwise rotation of the Shillong block has increased substantially in the past 4–8 Myr. Such acceleration is consistent with the reported recent slowing in the convergence rate across the Bhutan Himalaya. The current slip potential near Bhutan, based on present-day convergence rates and assuming no great earthquake since 1713 A.D., is now ~5.4 m, similar to the slip reported from alluvial terraces that offsets across the Main Himalayan Thrust and sufficient to sustain a Mw ≥ 8.0 earthquake in this area.
ISSN: 0148-0227

hal-01115084
https://hal.archives-ouvertes.fr/hal-01115084
DOI : 10.1002/2014JB011196

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
More than 10 years of geodetic measurements demonstrate an uplift rate of 1–3 mm/yr of the high topography region of the Western Alps. By contrast, no significant horizontal motion has been detected. Two uplift mechanisms have been proposed: (1) the isostatic response to denudation responsible for only a fraction of the observed uplift and (2) the rebound induced by the Wurmian ice cap melting which predicts a broader uplifting region than the one evidenced by geodetic observations. Using a numerical model to fit the geodetic data, we show that a crustal viscosity contrast between the foreland and the central part of the Alps, the latter being weaker with a viscosity of 1021 Pa s, is needed. The vertical rates are enhanced if the strong uppermost mantle beneath the Moho is interrupted across the Alps, therefore allowing a weak vertical rheological anomaly over the entire lithosphere.
ISSN: 0094-8276

hal-01332757
https://hal.archives-ouvertes.fr/hal-01332757
DOI : 10.1002/2016GL067821