Éditeur(s) : HAL CCSD
Résumé : East African Rift (EAR) is the divergent plate boundary. EAR exposes different stages of extension, from early stage rifting in Tanzania to oceanic accretion in Afar (Ethiopia). Manyara basin is the southernmost rift system of the east branch of EAR with recent volcanism (< 1.5 Ma) and a seismic swarm in the lower crust (20 – 40 km). Due to its location and tectonic setting, the Manyara basin offers the opportunity to study the earliest stage of rift initiation. Manyara volcanism is composed of several types of hyper-alkaline lavas as Mg-nephelinites (Mg# > 55) (Labait, Kwaraha), calciocarbonatite (Kwaraha) and evolved nephelinites (Mg# < 35) (Hanang).Mg-nephelinites (Labait and Kwaraha) are primary lavas mainly composed of olivine and clinopyroxene (cpx). Geochemical modelling from trace elements suggests that these primary magmas result from a degree of partial melting < 1 % from a CO2-garnet-phlogopite-bearing peridotite. These magmas have an asthenospheric source at depth > 120 km (lava carries xenoliths with equilibrium conditions > 4 GPa). The minerals were crystallized from a magma with a low H2O content (0.1 and 0.5 wt% H2O). The calciocarbonatite and evolved nephelinites are derived from Mg-nephelinites by fractional crystallization and immiscibility processes. Hanang nephelinites are silica- and alkaline-rich lavas (44.2 – 46.7 wt % SiO2, 9.5 –12.1 wt % Na2O+K2O, respectively) composed by cpx, Ti-garnet, nepheline, apatite and titanite. Complex zonation of cpx (e.g. abrupt change of Mg#, Nb/Ta, and H2O) and trace element patterns of nephelinites record magmatic differentiation involving open system with carbonate-silicate immiscibility and primary melt replenishment. The low H2O content of cpx (3 – 25 ppm wt. H2O) indicates that at least 0.3 wt % H2O was present at depth during carbonate-rich nephelinite crystallization at 340 – 640 MPa and 1050 – 1100 °C. The study of hosted-nepheline melt inclusions from Hanang allows constraining the late magmatic evolution of nephelinites during storage and magma ascent. Melt inclusions are composed by a silicate trachytic glass, a carbonate phase and a shrinkage bubble. Trachytic glass contains high content in CO2 (0.43 wt %, SIMS analyses), sulfur (0.21 – 0.92 wt % S), chlorine (0.28 –0.84 wt % Cl) and H2O low content (< 0.1 wt %, Raman analyses). Immiscibility process leading to the formation of carbonate occurs in a closed system during rapid magma ascent between 200 – 500 MPa. The carbonate phase is a Ca-Na-K-S-rich and anhydrous carbonate (33 wt % CaO, 20 wt % Na2O, 3 wt % K2O, and 3 wt % S). The pre-immiscible liquid has a phonolitic composition with 6 ± 1.5 wt % CO2 at 700 MPa. A preliminary study of melt inclusions by XANES spectroscopy and whole rocks by Mössbauer spectroscopy was used to determine these Manyara lavas were formed at oxidizing conditions (~ ΔFMQ +1.5).The early stage rifting volcanism (Manyara Basin) is characterized by CO2-rich and H2O-poor magmas from at least 120 km below the rift escarpment. The presence of CO2-rich magmas and the small amount of volcanic rocks erupted at the surface may indicate that the storage and percolation of these magmas at depth is a potential trigger for deep seismic swarms.
Le rift Est africain (REA) est une frontière de plaque en extension. Ce rift présente plusieurs stades d’extension, de l’initiation du rift en Tanzanie jusqu’à l’accrétion océanique en Afar. Le bassin de Manyara se situe le plus au sud de branche Est du REA. Il est caractérisé par la présence de volcanisme récent (< 1,5 Ma) et d’un essaim sismique dans la croûte inférieure (20 – 40 km). De par sa localisation et son contexte tectonique, le bassin de Manyara offre l’opportunité d’étudier le stade le plus précoce de l’initiation du rift. Le bassin de Manyara est composé de plusieurs types de laves hyperalcalines, les néphélinites magnésiennes (Mg# > 55) (Labait, Kwaraha), de calciocarbonatite (Kwaraha) et des néphélinites différenciées (Mg# < 35) (Hanang).Les néphélinites magnésiennes (Labait et Kwaraha) sont des laves primaires composées d’olivines et de clinopyroxènes (cpx). La modélisation géochimique des éléments en trace suggère que ces magmas primaires résultent d'un degré de fusion partielle ≤ 1 % à partir d'une péridotite à grenat et phlogopite. Ces magmas proviennent d’une profondeur > 120 km (présence de xénolites avec des conditions d’équilibre > 4 GPa). Les minéraux ont cristallisés à partir d’un magma pauvre en eau (0,1 et 0,5 pds % H2O). La calciocarbonatite et les néphélinites différenciés sont issues des néphélinites magnésiennes par cristallisation fractionnée et processus d’immiscibilité. Les néphélinites du Hanang sont riches en éléments alcalins (9,5 – 12,1 pds % Na2O+K2O) et en silice (44,2 – 46,7 pds% SiO2) et sont composés de cpx, grenat, néphéline, titanite et apatite. La zonation complexe dans les cpx (par exemple, changement brusque de Mg#, Nb/Ta, et H2O) implique une différenciation magmatique en système ouvert avec immiscibilité de liquide carbonaté et silicaté ainsi qu’un remplissage de la chambre magmatique avec des liquides primaires. La faible teneur en eau des cpx (3 – 25 ppm H2O) indique la présence d’un magma pauvre en eau (0,3 pds % H2O) lors de la cristallisation des cpx à des conditions crustales (340 – 640 MPa et 1050 – 1100 °C). L’étude des inclusions vitreuses dans les néphélines de Hanang permet de contraindre l'évolution magmatique tardive des néphélinites et le comportement des éléments volatils (CO2, H2O, S, F, Cl) lors du stockage et de la remontée du magma. Les inclusions vitreuses sont composées d’un verre trachytique, d’une phase carbonatée et d’une bulle de rétraction. Le verre trachytique contient du CO2 (0,43 pds % CO2, analyses SIMS), du soufre (0,21 à 0,92 pds% S), du chlore (0,28 – 0,84 pds % Cl) et très peu d’H2O (< 0,1 pds % H2O, analyses Raman). Le processus d’immiscibilité conduisant à la formation du carbonate se produit dans un système fermé pendant l'ascension rapide du magma, entre 200 – 500 MPa. La phase carbonatée est un carbonate anhydre et riche en Ca-Na-K-S (33 pds % CaO, 20 pds % Na2O, 3 pds % K2O, et 3 pds % S). Le liquide pré-immiscible a une composition phonolitique avec 6 ± 1,5 pds % CO2 à une pression de 700 MPa. Une étude préliminaire des inclusions par spectroscopie XANES et des roches par spectroscopie Mössbauer a permis de déterminer que les laves de Manyara se sont formées à conditions oxydantes (~ ∆FMQ +1,5).À l’initiation du rift, le volcanisme dans le bassin de Manyara est caractérisé par des magmas riches en CO2 et pauvres en H2O issus d’au moins 120 km de profondeur sous l'escarpement du rift. La présence de ces magmas riches en CO2 et la faible quantité de roches volcaniques émises à la surface peuvent indiquer que le piégeage et la percolation de ces magmas en profondeur est un déclencheur potentiel des essaims sismiques profonds.
https://tel.archives-ouvertes.fr/tel-01563231

NNT : 2016MONTT114
tel-01563231
https://tel.archives-ouvertes.fr/tel-01563231
https://tel.archives-ouvertes.fr/tel-01563231v2/document
https://tel.archives-ouvertes.fr/tel-01563231/file/2016_BAUDOUIN_archivage.pdf

Éditeur(s) : Yale University
Résumé : Sea-surface temperature images of the coastal upwelling regions off Northwest Africa show that the core of upwelling is sometimes located far from the coast. This has been documented in three regions that share a common feature, namely a wide and shallow continental shelf. This upwelling feature plays a key role in the ecology of the Canary Current System. It creates an innerfront which provides retention for biological material, e.g. fish eggs and larvae, in the highly productive nearshore environment. An analytical model has been developed based on a two dimensional extension of Ekman's solution. The linear and steady response of a homogeneous ocean forced by an upwelling-favorable wind provides a mechanism for the upwelling separation from the coast. The merging of the surface and bottom Ekman layers induces a very weak cross-shore circulation and a "kinematic barrier" for the Ekman transport divergence. In the case of an alongshore wind, the barrier is located near the isobath h ≈ 0.4D, where D is the thickness of Ekman layers. This yields an upwelling cell which is essentially concentrated in the region 0.5D < h < 1.25D, with upwelling occurring preferentially near the isobath h ≈ 0.6D. It turns out that the cross-shore width of upwelling scales with D/S, the ratio of Ekman depth to bottom topographic slope. The application of this solution to real bathymetric profiles rationalizes, not only the offshore upwelling observations in Northwest Africa, but also the influence of topography on the cross-shelf structure of a wind-driven coastal upwelling. The model also quantifies the effect of the cross-shore wind component showing how it drives the nearshore pressure gradient adjustment and how it affects the upwelling. A linear numerical experiment reproduces the theoretical steady solution, thereby allowing investigation of the transient regime. Relaxation of the hypothesis in the numerical model validates the linear assumption of the theory and then allows investigation of the sensitivity to friction parameterizations and the influence of stratification. The latter leads to an "oscillation" of the upwelling cell with seaward migration driven by outcropping and homogeneization of the water column, and, coastal incursion driven by a "boundary layers splitting" process caused by shoreward advection of the isopycnal dome and stratification of the inner shelf.
Journal of Marine Research (Yale University), 2008-09 , Vol. 66 , N. 5 , P. 589-616

Droits : 2008 Yale University
http://archimer.ifremer.fr/doc/2008/publication-6334.pdf
DOI:10.1357/002224008787536790
http://archimer.ifremer.fr/doc/00000/6334/

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
During the last decade, the interaction of deep processes in the lithosphere and mantle with surface processes (erosion, climate, sea-level, subsidence, glacio-isostatic readjustment) has been the subject of heated discussion. The use of a multidisciplinary approach linking geology, geophysics, geodesy, modelling, and geotechnology has led to the awareness of coupled deep and surface processes. Deep earth dynamics (topography, erosion, tectonics) are strongly connected to natural hazards such as earthquakes, landslides, and tsunamis; sedimentary mass transfers have important consequences on isostatic movements and on georesources, geothermal energy repartitions. The ability to read and understand the link between deep Earth dynamics and surface processes has therefore important societal impacts. Ground-truthing at carefully-selected sites of investigation is imperative to better understand these connections.Due to its youth (<30 Ma) and its subsidence history, the almost land-locked Gulf of Lion–Sardinia continental margins system provides a unique record of sedimentary deposition from the Miocene to present. Due to its high subsidence rate, palaeoclimatic variations, tectonic events and vertical evolution are all recorded here at very high resolution. The late Miocene isolation and desiccation of the Mediterranean, the youngest and most catastrophic event, the Messinian Salinity Crisis (MSC), induced drastic changes in marine environments: widespread deposition of evaporite (gypsum, anhydrite and halite) in the central basin, and intense subaerial erosion along its periphery. These extraordinary mass transfers from land to sea induced strong isostatic re-adjustments that are archived in the sedimentary record and represent a window to the lithospheric rheology and the deep processes.The GOLD (Gulf of Lion Drilling) project, proposes to explore this unique sedimentary record as well as the nature of the deep crustal structure, providing valuable information about the mechanisms underlying vertical motions in basins and their margins.
ISSN: 0264-8172

insu-01197393
https://hal-insu.archives-ouvertes.fr/insu-01197393
https://hal-insu.archives-ouvertes.fr/insu-01197393/document
https://hal-insu.archives-ouvertes.fr/insu-01197393/file/Rabineau%20et%20al.-final-MPG2014_REVISED-FINAL-No-Marked_FINAL%2BFigures.pdf
DOI : 10.1016/j.marpetgeo.2015.03.018

Éditeur(s) : HAL CCSD MAIK Nauka/Interperiodica
Résumé : Interaction between surface processes and deep tectonic processes plays a key role in the structural evolution, kinematics and exhumation of rocks in orogenic wedges. The deformation patterns observed in analogue models applied to natural cases of present active or ancient mountain belts reflect several first order processes that result of these interactions. Internal strain partitioning due to mechanical behaviour of a thrust wedge has a strong impact on the vertical component of displacement of tectonic units that in return favour erosion in domains of important uplift. Such strain partitioning is first controlled by tectonic processes, but surface processes exert a strong feed back on wedge dynamics. Indeed, material transfer in thrust wedges not only depends on its internal dynamics, it is also influenced by climate controlled surface processes involving erosion and sedimentation. Effects of erosion are multiple: they allow long term localization of deformed domains, they favour important exhumation above areas of deep underplating and combined with sedimentation in the foreland they contribute to maintain the wedge in a critical state for long time periods. The simple models illustrate well how mountain belts structure, kinematics of tectonic units and exhumation are determined by these complex interactions.
ISSN: 0016-8521

hal-00561361
https://hal.archives-ouvertes.fr/hal-00561361
DOI : 10.1134/S0016852110060075

Éditeur(s) : HAL CCSD Ocean Drilling Programm
Résumé : This paper provides a summary of postcruise scientific results from Ocean Drilling Program (ODP) Leg 209 available to date, building upon shipboard observations and syntheses summarized in the Leg 209 Initial Results volume. During Leg 209, 19 holes were drilled at 8 sites along the Mid-Atlantic Ridge from 14°43´ to 15°44´N, mainly in residual mantle peridotite intruded by gabbroic rocks, in order to understand the tectonic and structural processes responsible for formation of oceanic lithosphere with abundant residual peridotite exposed on the seafloor coupled with a relatively low proportion of volcanic rocks. Based on proportions of recovered lithologies, the entire area may be underlain by mantle peridotite with ~20%–40% gabbroic intrusions and impregnations. Impregnated peridotites with olivine + two pyroxenes + plagioclase + spinel that apparently formed in equilibrium probably record crystallization from primitive mid-ocean-ridge basalt at pressures of 0.5–0.6 GPa. Metamorphic equilibria record isobaric cooling to ~1100°C at this pressure. Thus, the conductively cooled thermal boundary layer beneath the Mid-Atlantic Ridge in this region is >15 km thick. Combined crystallization and reaction with residual peridotite formed a series of impregnated peridotites recording increasing Na content at nearly constant Mg#; this process could explain some of the variation in fractionation-corrected Na (e.g., Na = 8.0) observed in mid-ocean-ridge basalts. Clinopyroxene textures and compositions record such impregnation processes, and they are particularly well documented for Site 1274. Other Leg 209 gabbroic rocks formed from extensive crystallization of highly evolved melts, indicating that a substantial proportion of melt entering the thermal boundary layer crystallizes entirely beneath the seafloor, with no volcanic equivalent. Alteration of peridotites occurred over a range of temperatures and is the result of three distinct processes: rock-dominated serpentinization with formation of brucite in olivine-rich lithologies, fluid-dominated serpentinization with formation of magnetite and no brucite, and fluid-dominated talc alteration with addition of SiO2 as well as H2O and oxygen. The latter two processes also exhibit detectable trace element metasomatism that is distinct in its character from the igneous impregnation described in the previous paragraph. Microstructures show that most residual peridotites were not ductilely deformed at temperatures less than ~1200°C. Structural and paleomagnetic data require tectonic rotations of relatively undeformed blocks; some rotations probably exceeded 60° around nearly horizontal axes parallel to the rift axis. Rotations occurred along several generations of high-temperature mylonitic shear zones extending deeper than 15 km depth and numerous faults at lower temperature. Early formed shear zones and faults were passively rotated around later features; such a process could have produced low-angle fault surfaces without slip on low-angle faults. This region provides end-member examples of processes that are common at many or most slow-spreading ridges. Osmium isotope ratios indicate an ancient history of depletion for residual peridotites from the 14°–16°N region along the Mid-Atlantic Ridge. Though depleted Os isotope ratios in peridotite have been reported elsewhere along the global ridge system, the values from this region are among the most depleted. In general, Os isotope ratios from mid-ocean-ridge basalts are systematically more radiogenic than Os isotope ratios from ridge peridotite samples, suggesting a polygenetic heterogeneous source for mid-ocean-ridge basalts. Geochemical studies of zircons from Leg 209 gabbroic rocks and impregnated peridotites, together with other ridge and arc-related zircons, indicate that ridge zircons have systematically lower fractionation-corrected U and Th concentrations compared to arc zircons. This observation provides a tool for interpreting the tectonic provenance of ancient detrital zircons and indicates an arclike provenance for Hadean detrital zircons. Geobiological studies and aerobiological studies were also undertaken during Leg 209. The geobiological work found no measurable microbial enhancement of olivine dissolution rate, possibly because the samples from Leg 209 were sterile. The aerobiological study determined that dust from North Africa, collected from the derrick of the JOIDES Resolution during Leg 209, contains a variety of abundant microorganisms.
Proceedings ODP, scientific results, 209

hal-00407966
https://hal.archives-ouvertes.fr/hal-00407966
DOI : 10.2973/odp.proc.sr.209.001.2007

Éditeur(s) : HAL CCSD Société géologique de France
Résumé : The mechanical equilibrium of an orogenic wedge is maintained thanks to interactions between tectonic processes and surface processes. To better constrain the influence of erosion and sedimentation on the evolution of orogens, we performed a series of analogue models based on the tapered wedge principle, varying the amounts of erosion and sedimentation. The models develop by frontal accretion in the foreland basin and by simple underthrusting and subsequent underplating in the hinterland. The variations in rates of erosion and sedimentation strongly modify the extent, the morphology, the structures, the timing of development and the material paths in the different models. Under certain conditions, entire structural units can be formed and subsequently eroded out of the geological record, leading to important underestimations when restoring sections. Particles located in the converging lower-plate or in the upper-plate show complex uplift paths related to tectonic stages. The correlation between models and three Alpine tectonic cross-sections emphasizes the role of erosion and sedimentation on the dynamics and development of the orogen and adjacent Molasse basin. Along strike changes in the present structure of the orogen could be explained in part by differences in surface processes.
EISSN: 1777-5817

hal-00411140
https://hal.archives-ouvertes.fr/hal-00411140
DOI : 10.2113/gssgfbull.3.297

Éditeur(s) : The Oceanography Society
Résumé : Data assembly and processing centers are essential elements of the operational oceanography infrastructure. They provide data and products needed by modeling and data assimilation systems; they also provide products directly usable for applications. This paper discusses the role and functions of the data centers for operational oceanography. It describes some of the main data assembly centers (Argo and in situ data, altimetry, sea surface temperature) developed during the Global Ocean Data Assimilation Experiment. An overview of other data centers (wind and fluxes, ocean color, sea ice) is also given. Much progress has been achieved over the past 10 years to validate, intercalibrate, and merge altimeter data from multiple satellites. Accuracy and timeliness of products have been improved, and new products have been developed. The same is true for sea surface temperature data through the Global High-Resolution Sea Surface Temperature Pilot Project. A breakthrough in processing, quality control, and assembly for in situ data has also been achieved through the development of the real-time and delayed-mode Argo data system. In situ and remote-sensing data are now systematically and jointly used to calibrate, validate, and monitor over the long term the quality and consistency of the global ocean observing system. Main results are illustrated. There is also a review of the development and use of products that merge in situ and remote-sensing data. Future issues and main prospects are discussed in the conclusion.
Oceanography (1042-8275) (The Oceanography Society), 2009-09 , Vol. 22 , N. 3 , P. 56-69

Droits : 2009 The Oceanography Society
http://archimer.ifremer.fr/doc/2009/publication-6879.pdf
http://archimer.ifremer.fr/doc/00000/6879/

Éditeur(s) : Actes de colloques. Ifremer Brest [ACTES COLLOQ. IFREMER.]. 1986
Résumé : Seawater samples taken from shallow suspended particle maxima (20-57m) at or near the base of the surface mixed layer in various oceanic areas were tested for their potential to produce hydrogen (H sub(2)) gas. Results suggest that hydrogen can be bacterially produced through a fermentative process in microanaerobic niches within particulate matter. The organisms responsible for this process are ubiquitous within the temperate and tropical waters sampled. Enumeration of potential H sub(2)-producing bacteria using fluorescent antibody techniques yielded a maximum at the base of the surface mixed layer, the same depth where the greatest H sub(2) gas production potential was observed. Hydrogen-producing bacteria comprised up to 15% of the total bacterial direct count (AODC). Findings indicate that bacteria associated with shallow nepheloid layers are capable of producing gas and thus contributing to the observed supersaturated gas concentration in the marine environment.
Des échantillons d'eau de mer contenant des particules en suspension ont été prélevés en zone peu profonde (20 à 57 m) sur ou près de la couche brassée de surface en différents points de l'océan et ont été testés pour leur potentiel de production d'H2. Les résultats suggèrent que l'hydrogène peut être produit, par les bactéries, lors d'un processus fermentatif dans des microniches anaérobies de la matière particulaire. Les organismes responsables de ce processus sont ubiquistes dans les échantillons provenant des eaux tempérées el tropicales. Les numérations maximales de bactéries potentiellement productrices d'hydrocele, faites par des techniques d'anticorps fluorescents, sont obtenues à la base de la couche brassée de surface ; à cette même profondeur est observé le potentiel de production d'hydrogène le plus important. Les bactéries productrices d'hydrogène constituent jusqu'à 15 % des numérations bactériennes totales, effectuées par comptage direct (AODC). Ces observations indiquent que les bactéries associées aux couches nephéloïdes peu profondes sont capables de produire de l'hydrogène et contribuent ainsi à la sursaturation en gaz observée dans le milieu marin.

Droits : info:eu-repo/semantics/openAccess
http://archimer.ifremer.fr/doc/1984/acte-962.pdf
http://archimer.ifremer.fr/doc/00000/962/

Éditeur(s) : Université de Bretagne Occidentale
Résumé : Study of mineral suspended particulate matter (SPM) is essential to understand ecosystem dynamics. SPM influences light penetration which is closely related to primary production and carries pollutants and nutrients within the water masses. This work aims to study near-surface mineral SPM dynamics in the English Channel using two complementary methods: remote-sensing by satellites and numerical modelling. Firstly, MODIS and MERIS satellite images processed by the IFREMER semi-analytical algorithm and describing non-algal SPM, are analysed to build three statistical models which are able to estimate near-surface SPM using simple variables, e.g., tidal coefficient, significant wave height and mean chlorophyll-a concentration. Secondly, the three-dimensional hydrosedimentary model ROMS (Regional Ocean Modeling System) is applied in the English Channel. It considers tidal forcing along open boundaries, wind stress at the sea-surface, wave-current interactions in the bottom boundary layer and realistic heterogeneous bottom sediments. Results of the more sophisticated statistical model is also used to impose SPM concentrations at open boundaries. Sensitivity tests on SPM boundary conditions show the importance of prescribing realistic sediment concentrations to improve the model predictions. Biological influences on mineral SPM are also tested using settling velocity and critical shear stress for erosion which vary with seasons. Both statistical and numerical models highlight and locate respective influences of tide, waves and biology on mineral SPM. Numerical predictions indicate that near-surface SPM is mainly composed of silts (>70%). Near-surface suspended silts come largely from seabed resuspension alongshore in the Eastern Channel and from the open boundaries of our limited-area coastal model at the West of Cotentin Peninsula and offshore. Near-surface SPM variations are investigated at semi-diurnal, neap-spring tidal cycle time scales and during a wave event. Finally, dynamics of sediments in the turbidity maximum zone around the Isle of Wight is examined depending on hydrodynamical conditions in order to distinguish the role played by advection and local erosion/settling processes in this area. Keywords: Suspended particulate matter, satellite, remote-sensing, modelling, English Channel, sediments, turbidity, tide, wave
L'étude des matières en suspension (MES) minérales est essentielle pour comprendre le fonctionnement des écosystèmes en Manche : les MES influencent la pénétration de la lumière dans la colonne d'eau, paramètre clé pour la production biologique, et sont susceptibles de transporter des polluants et nutriments. Lors de ce travail, la dynamique des MES minérales de surface en Manche est étudiée à l'aide de deux méthodes complémentaires : l'observation par satellite et la modélisation numérique tridimensionnelle. Dans un premier temps, les images satellite MODIS et MERIS, traitées par l'algorithme semi-analytique développé par l'IFREMER et représentant les MES non-algales de surface, sont analysées afin d'élaborer trois modèles statistiques permettant d'estimer la MES de surface en fonction de variables basiques telles que le coefficient de marée, la hauteur significative des vagues et la concentration moyenne en chlorophylle-a. Dans un deuxième temps, le modèle hydrosédimentaire multiclasse tridimensionnel ROMS (Regional Ocean Modeling System) est implémenté en Manche. Il prend en considération le forçage par la marée aux frontières ouvertes, la contrainte exercée par le vent à la surface de la mer, l'interaction houle-courant en couche limite de fond et l’hétérogénéité spatiale réaliste du lit sédimentaire. Les résultats du modèle statistique le plus sophistiqué sont également utilisés pour forcer la concentration en MES aux frontières ouvertes du domaine de calcul. Des tests de sensibilité sur les conditions limites montrent l'importance de considérer de manière réaliste les sédiments entrant en Manche par les frontières ouvertes lors de la modélisation numérique. L'influence de la biologie sur les MES minérales est testée en utilisant une formulation de la vitesse de chute et de la contrainte critique d'érosion variant saisonnièrement. Grâce à ces deux outils associés, les influences respectives de la marée, de la houle et de la biologie sur les MES minérales sont mises en avant et localisées en Manche. Le modèle numérique prédit que les MES de surface sont composées principalement de silts (>70%). Les silts en suspension en surface proviennent majoritairement du lit sédimentaire près des côtes en Manche orientale et des frontières ouvertes du domaine de calcul à l'ouest de la presqu'île du Cotentin et au large en Manche centrale et orientale. Les variations des MES de surface sont ensuite étudiées aux échelles des cycles de marée semi-diurnes, vive-eau/morte-eau et autour d'un épisode de houles. Enfin, l'évolution de la concentration de sédiments dans la zone de forte turbidité autour de l'île de Wight peut être analysée suivant les conditions hydrodynamiques afin d'évaluer les rôles respectifs des processus locaux d'érosion/dépot et d'advection dans la génération de ces turbidités remarquables. Mots-clés : Matière en suspension, télédétection, satellite, modélisation, Manche, sédiments, turbidité, marée, houle

Droits : 2013 UBO
http://archimer.ifremer.fr/doc/00157/26783/24884.pdf
http://archimer.ifremer.fr/doc/00157/26783/

Éditeur(s) : HAL CCSD Geological Society of America
Résumé : International audience
Integrated Ocean Drilling Program Expedition 313 continuously cored uppermost Eocene to Miocene sequences on the New Jersey shallow shelf (Sites M27, M28, and M29). Previously, 15 Miocene (ca. 23-13 Ma) seismic sequence boundaries were recognized on several generations of multichannel seismic profi les using criteria of onlap, downlap, erosional truncation, and toplap. We independently recognize sequence boundaries in the cores and logs based on an integrated study of core surfaces, lithostratigraphy and process sedimentology (grain size, mineralogy, facies, and paleoenvironments), facies successions, stacking patterns, benthic foraminiferal water depths, downhole logs, core gamma logs, and chronostratigraphic ages. We use a velocitydepth function to predict the depths of seismic sequence boundaries that were tested by comparison with major core surfaces, downhole and core logs, and synthetic seismograms. Using sonic velocity (core and downhole), core density, and synthetic seismograms, we show that sequence boundaries correspond with acoustic impedance contrasts, although other stratal surfaces (e.g., maximum fl ooding and transgressive surfaces) also produce refl ections. Core data are suffi cient to link seismic sequence boundaries to impedance contrasts in 9 of 12 instances at Site M27, 6 of 11 instances at Site M28, and 8 of 14 instances at Site M29. Oligocene sequences have minimal lithologic and seismic expression due to deep-water locations on clinoform bottomsets. Miocene sequences (ca. 23-13 Ma) were sampled across several unconformity clinothems (prograding units) on topset, foreset, and bottomset locations. Excellent recovery allows core-seismic integration that confi rms the hypothesis that unconformities are a primary source of impedance contrasts. Our core-seismic-log correlations predict that key seismic surfaces observed in other sub surface investigations without core and/or well logs are stratal surfaces with sequence stratigraphic signifi cance.
EISSN: 1553-040X

insu-00946235
https://hal-insu.archives-ouvertes.fr/insu-00946235
DOI : 10.1130/GES00858.1

Éditeur(s) : HAL CCSD Geological Society of America
Résumé : orogenic wedges
Interaction between surface and tectonic processes plays a key role in the structural evolution, kinematics, and exhumation of rocks in orogenic wedges. The deformation patterns observed in analog models show that strain partitioning has a strong impact on the vertical component of displacement of tectonic units, which in return favors erosion in domains of important uplift. Partitioning is controlled by tectonic processes and by climate-dependent surface processes, including erosion and sedimentation. The effects of partitioning include localization of deformed domains, exhumation above areas of deep underplating, and steady-state maintenance of wedges for long time periods. Simple models illustrate well how the morphostructural evolution of mountain belts is determined by these complex interactions.
ISSN: 1052-5173

hal-00558931
https://hal.archives-ouvertes.fr/hal-00558931
DOI : 10.1130/GSATG48A.1

Éditeur(s) : Université Bordeaux 1
Résumé : The mercury cycle was explored in the Petit-Saut reservoir / Sinnamary Estuary continuum in French Guiana. Main processes involve (i) photo-induced reduction, (ii) adsorption and desorption at the particle surfaces, (iii) methylating bacterial activity, (iv) precipitation and dissolution of iron oxyhydroxides and sulfides. Sources of mercury to the Petit-Saut reservoir consist of the partly impacted river-tributaries, the atmospheric deposition and the flooded soils or vegetation. Once into the reservoir, divalent mercury undergoes a large spectrum of transformations including speciation and phase changes. We, here, probe these processes and demonstrate that the Petit-Saut reservoir behaves as a privileged site for atmospheric recycling and in situ methylation. At the air / water interface, the mercury evasion exceeds by 50 % the direct atmospheric deposition. The in situ monomethylmercury (MMHg) production mostly occurs at the water-column chemocline and near the benthic interface. It reaches, for the whole reservoir, 8.1 moles yr-1 which corresponds to a 0.06 % d-1 methylation rate. We calculated that the 2003/04 period MMHg outputs from the reservoir to the Sinnamary Estuary averaged 13.5 moles yr-1 while the inputs were 5.4 moles yr-1. The dynamic Sinnamary Estuary is the genuine geochemical reactor of the continuum. There, the divalent mercury undergoes rapid yet profound partitioning among phases, recycling to the atmosphere and methylation processes. Those mostly originate from the long-scale oxygen paucity of the dam discharged waters. The expression of marked redox gradients and the intense organic matter turnover enhance the production of methylable inorganic mercurial species and tend to favor the sulfate reducing bacteria (methylating agents) activity. As a result, the dynamic Sinnamary Estuary exports 60 % more MMHg than it does import: 27 versus 17 moles yr-1. Further at large, in the saline estuary, we determined: (i) a non conservative behavior of dissolved (< 0.2 µm) mercury, (ii) a lowering of the mercury level of particles during mixing with the Amazon plume and (iii) a gradual dilution of the estuarine mercury concentrations by oceanic waters.
La retenue de Petit-Saut et, à l'aval, l'estuaire du Sinnamary sont deux centres d'altération du cycle naturel du mercure. Les processus sont, entre autres, (i) la photoréduction, (ii) la sorption / désorption en surface des particules, (iii) l'activité méthylante des bactéries, (iv) la dissolution / précipitation des oxyhydroxydes et des sulfures de fer. Les sources de mercure vers la retenue sont variées. Elles regroupent, en premier lieu, les affluents (partiellement orpaillés), l'atmosphère, les sols et la végétation ennoyés. Dans la colonne d'eau, les formes divalentes du mercure subissent un train complet de transformations couplant changements de phase et de spéciation. Nos résultats illustrent ces processus et démontrent que la retenue constitue un site privilégié de recyclage vers l'atmosphère et de méthylation. A l'interface air / eau, les exports en mercure de la retenue excèdent de 50 % le dépôt atmosphérique. La production endogène de monométhylmercure (MMHg) a lieu dans des sites particuliers : la chemocline et l'interface benthique. Elle atteint pour l'ensemble de la retenue 8,1 moles a-1 soit un taux de méthylation de 0,06 % j-1. On estime que la retenue exporte vers l'estuaire du Sinnamary 13,5 moles a-1 de MMHg alors qu'elle n'importe que 5,4 moles a-1. L'estuaire dynamique du Sinnamary constitue le véritable réacteur chimique du système fonctionnant en liaison avec celui de la retenue. Le mercure y décrit un cycle rapide aux processus de partition, de recyclage et de méthylation marqués. Ces processus résultent de l'oxygénation incomplète et durable des masses d'eau anoxiques exportées par la retenue de Petit-Saut. L'expression de gradients rédox prononcés conjuguée à un intense recyclage de la matière organique y favorise la production de formes méthylables de mercure ainsi que l'activité des bactéries sulfatoréductrices (agents de la méthylation). C'est pourquoi, l'estuaire dynamique du Sinnamary exporte 60 % plus de MMHg qu'il n'importe : 27 contre 17 moles a-1. Plus en aval, dans l'estuaire salin, nous avons mis en évidence : (i) un comportement non conservatif du mercure dissous, (ii) un appauvrissement du mercure des particules suite au mélange avec le panache de l'Amazone et (iii) une dilution des concentrations par les masses d'eau océaniques.

Droits : info:eu-repo/semantics/openAccess
http://archimer.ifremer.fr/doc/2006/these-1508.pdf
http://archimer.ifremer.fr/doc/00000/1508/

Éditeur(s) : HAL CCSD
Résumé : When the upper crust below the mountain ranges shows crustal extension with a direction collinear to the convergence direction, it is generally accepted that it is the result of gravitational collapse. However, recent studies challenge this paradigm by showing that erosion induces uplift and extension in the central part of the low convergent mountain ranges. In this study, we investigate the impact of denudation on the seismotectonic regime of mountain ranges.In order to identify a relationship between seismotectonic regime and erosion, the first part of this work presents a compilation of data in the mountain ranges. Based on these observations, a simple kinematic model is proposed to predict the seismotectonic regime of the study ranges.For low convergence rate and moderate mean elevation ranges, this model predicts an extension regime when the denudation rate is 15% higher than the convergence rate.The second part is devoted to the development of thermomechanical 2D finite element models to study the impact of surface processes on the deformation of the Pyrenees. The results show that the isostatic response to erosion reactivates pre-existing structures. The kinematics of an inherited fault plane can be predicted due to the gradient of the horizontal surface velocity profile. Thus, a plane located in the eroded zone is reactivated in normal fault when near the border of the erosion area, this same plane is reactivated in reverse fault. These results suggest that the current deformation in the North Pyrenean Zone could be the result of surface processes.Given the small number of studies quantifying erosion rates in the Pyrenees, the models developed in the second part suffer from high uncertainty. To remedy this, we study the central Pyrenees through a study that combines two types of data : watershed denudation rates from cosmogenic isotopes concentration, and incision rates from sediments buried in the karst. These results are presented in chapter 3. Denudation profiles obtained are consistent with reactivation of a normal fault plane located in the North Zone of the Central Pyrenees.From our study in the Pyrenees, a good correlation appears between the value of the rate of erosion and the glacier occupation. Given that the glaciers where more developed in the Alps, it raises the question of the impact of the late-würmian deglaciation on the present deformation of this range. A numerical model detailing this relationship is presented in the fourth chapter. Theresults show that deglaciation of the western Alps is controlled by the rheological heterogeneity of the crust. Some of our models predict uplift rates consistent with those highlighted by geodesy.
Lorsque l’extension de la croûte sous les parties hautes des chaînes de montagnes est colinéaire à la direction de convergence, il est traditionnellement admis que le moteur est l’effondrement gravitaire. Pourtant, des études récentes remettent en cause ce paradigme en montrant que l’érosion induit un soulèvement et de l’extension dans la partie centrale des chaînes de montagne à faible taux de convergence. L’objectif de notre étude est d’étudier l’impact de la dénudation de la topographie sur le régime sismo-tectonique des chaînes de montagnes.La première partie de ce travail présente une compilation de données dans les chaînes de montagnes afin de dégager des relations entre régime sismo-tectonique et érosion. Sur la base de ces observations, un modèle cinématique simple permettant de prévoir le régime de la chaîne est proposé. Ainsi, pour les chaînes à faible taux de convergence et d’élévation moyenne, ce modèleprédit de l’extension lorsque le taux de dénudation est 15% plus élevé que le taux de convergence.La deuxième partie est consacrée au développement d’un modèle thermo-mécanique 2D en éléments finis pour étudier l’impact des processus de surface sur la déformation des Pyrénées.Les résultats montrent que la réponse isostatique à l’érosion permet de réactiver des structurespré-existantes. La cinématique d’un plan de faille hérité peut être prédite grâce au gradient du profil des vitesses de surface horizontales. Ainsi, un plan situé dans la zone d’érosion est réactivé en faille normale alors qu’en bordure de cette zone une faille est réactivée en régime inverse. Ces résultats suggèrent que la déformation actuelle des Pyrénées pourrait être la conséquence d’unprocessus d’érosion.Compte tenu du faible nombre d’études quantifiant les taux d’érosion dans les Pyrénées, les modèles développés dans la deuxième partie souffrent d’une forte incertitude. Pour y remédier, nous avons cherché à les quantifier dans les Pyrénées Centrales grâce à une étude qui combine deux types de données : taux de dénudation des bassins versants à partir des isotopes cosmogéniques, et vitesses d’incision à partir des sédiments piégés dans les karsts. Ces résultats sontprésentés dans la troisième partie. Les profils de dénudation obtenus sont compatibles avec unrejeu en faille normale d’un plan situé dans la Zone Nord Pyrénéenne des Pyrénées Centrales.Notre étude dans les Pyrénées, montre une bonne corrélation entre la valeur du taux d’érosion et la cartographie de l’occupation glaciaire. Les glaciers ayant été plus développés dans les Alpes, cela pose la question de l’impact de la déglaciation tardi-Wurmienne sur la déformation actuelle de cette chaîne. Un modèle numérique détaillant cette relation est présenté dans le quatrième chapitre. Les résultats montrent que la déglaciation des Alpes occidentales est contrôléepar l’hétérogénéité rhéologique de la croute. Certains de nos modèles prédisent des vitesses de surrection compatibles avec celles mises en évidence par la géodésie.
https://hal.archives-ouvertes.fr/tel-01262333

tel-01262333
https://hal.archives-ouvertes.fr/tel-01262333
https://hal.archives-ouvertes.fr/tel-01262333/document
https://hal.archives-ouvertes.fr/tel-01262333/file/these-Genti-2015-postjury.pdf

Éditeur(s) : HAL CCSD
Résumé : The Karakorum Fault zone (KFZ), lying in the west of the Tibetan plateau, is an important dextral strike-slip fault and the important northern geological boundary of the west Himalaya. In the AyilaRi' gyu Range-Gai Basin area lying in the southeast of the KFZ, Ar-40/Ar-39 thermochronologic analysis was performed on the syn-tectonic minerals in the, metamorphic rocks in the Karakorum ductile shear zone, with the base of petrology and deformation structure researches. According to the microstructure features, the minerals in the shear zone recorded the continuous deformation from high ( > 600 degrees C) to low temperature ( < 250 degrees C) appeared as that the nearly horizontal dextral shearing has transformed into the oblique dextral normal slip, made the greenschist facies of deformation stack oil the early medium-high temperature deformation, indicated the uplift during the slip. The thermochronologic revealed the continuous shear process from the early Miocene to 4Ma at least, which containing three rapid cooling stage: from 25 similar to 22Ma to 21 similar to 18Ma, the deformation locally stopped or slower in the, shallow high temperature shear process; from 15Ma to 12Ma, the rapid uplift of the AyilaRi' gyu Range, the initial formation of the Gar Basin together with the main deep incision of river during the strip-slip of the KFZ; since 9Ma, the AyilaRi' gyu Range has increased the rapid uplift and the Gar Basin has formed finally. According to the different levels of deformation and the dextral displacement of the surface landform with different ages, the long term slip rate and the uplift rate indicated the intense dextral strike slip and uplift associated since the late Quarternary Period.
Acta Petrologica Sinica

hal-00411572
https://hal.archives-ouvertes.fr/hal-00411572

Éditeur(s) : HAL CCSD
Résumé : The presence of biological matter (biofilms) in deep geological sites for storage of, for instance, toxic elements or groundwater in aquifers was clearly proved. That biomass triggers physical and chemical processes which greatly modify the durability and the sustainability of the sites. These processes, mainly from oxidative/reductive reactions, are poorly understood. This is mainly due to the fact that former studies were done at the macroscopic level far away from the micrometric scale where relevant processes induced by bacteria take place. Investigations at microscopic level are needed. Thus, we developed an experimental set-up based on the combined use of optical microscopy (transmission), atomic force microscopy (AFM) and electrical and electro-chemical AFM microscopy (EC_AFM) in order to get simultaneous information on topographic and electro-chemical processes. The first highly sensitive step was to use AFM with biological samples in liquid environment: wepresent here a study about AFM imaging of living, moving or self-immobilized bacteria, in their genuine physiological liquid medium and in true in vivo conditions. No external immobilization protocol, neither chemical nor mechanical was needed. For the first time, the native gliding movements of Gram negative Nostoc cyanobacteria upon the surface were studied by AFM. AFM height and mechanical stiffness data were simultaneously acquired. From these, mechanical parameters, inner turgor pressure and Young modulus, were derived for different bacterial species (Anabaenopsis circularis, Rhodococcus wratislaviensis). Our study revealed that AFM imaging is thus possible on moving living species. These results open a large window on new studies of both dynamical phenomena of practical and fundamental interests such as the formation of biofilms and dynamic properties of bacteria in real physiological conditions. The second delicate step was to combine AFM and optical measurements with electrical ones. We mounted a new experimental set-up coupling real-time (i) monitoring of optical properties as the optical density (OD) evolution related to bulk bacterial growth in liquid or as the counting of number of bacteria adhering on the surface of the sample as well and (ii) electrical and electrochemical measurements. Furthermore, these results will shortly be applied to the optimized monitoring of the in-situ activity of bacteria consuming oil pollutants, following this way, in real-time, the bioremediation of an oilcontaminated soil (ANR ECOTECH_BIOPHY program).
La présence de matière biologique (biofilms) dans les sites de stockage géologique profond, d'éléments toxiques ou encore de l'eau potable des aquifères est maintenant clairement démontrée. Cette biomasse est à l'origine de processus physiques et chimiques qui modifient considérablement la durabilité et la pérennité des sites concernés. Ces processus, principalement de type oxydo-réductif, sont encore mal compris. Ceci est principalement dû aux méthodes d'investigation, principalement macroscopiques, loin de l'échelle micrométrique caractéristique des bactéries. Seules des études, basées sur des méthodes d'investigation locale, peuvent apporter les informations requises. Ainsi, nous avons développé un dispositif expérimental basé sur l'utilisation combinée de la microscopie optique (en transmission), la microscopie à force atomique (AFM) et la microscopie AFM en mode électrique et électrochimique (EC_AFM) afin d'obtenir des informations simultanées sur la topographie de l'échantillon et sur les processus électrochimiques à l'échelle des bactéries. La première étape sensible consistait à utiliser l'AFM sur des échantillons biologiques en milieu liquide: nous présentons ici les résultats de l'imagerie AFM en milieu liquide de plusieurs types de bactéries dans leurs conditions physiologiques naturelles (conditions in vivo). Aucun protocole d'immobilisation, ni chimique ni mécanique, n'a été nécessaire; et pour la première fois, les mouvements de reptation de cyanobactéries Nostoc ont été étudiés par l'AFM. Les études AFM ont permis d'acquérir des données topographiques mais aussi mécaniques : nous avons pu ainsi mesurer le module d'Young, la pression de turgescence de différentes souches bactériennes (Anabaenopsis circularis, Rhodococcus wratislaviensis). Cette étude complète, a révélé que l'imagerie AFM est donc possible sur des espèces vivantes en mouvement. Ces résultats ouvrent une grande fenêtre sur de nouvelles études d'intérêts tels que la formation de biofilms et les propriétés dynamiques de bactéries dans des conditions physiologiques réelles. La deuxième étape délicate était de combiner l'AFM aux mesures optiques et électriques. Nous avons développé un nouveau dispositif expérimental permettant (i) le suivi de l'évolution de la croissance bactérienne par la mesure des propriétés optiques comme la densité optique DO (pour le développement bactérien en volume - milieu planctonique) , ou l'analyse de l'image du substrat par comptage du nombre de bactéries sur la surface de l'échantillon (biofilm), et (ii) les mesures électriques et électrochimiques. L'ensemble de ces résultats sera prochainement appliqué au développement de nouveaux outils de surveillance d'une biodépollution de terrain contaminé par les hydrocarbures, par le suivi in situ et en temps réel de l'activité de bactéries dépolluantes (ECOTECH_BIOPHY ANR).
https://tel.archives-ouvertes.fr/tel-01044714

tel-01044714
https://tel.archives-ouvertes.fr/tel-01044714
https://tel.archives-ouvertes.fr/tel-01044714/document
https://tel.archives-ouvertes.fr/tel-01044714/file/theseDhahri2013.pdf

Éditeur(s) : HAL CCSD Nordic Ecological Society
Résumé : Niche differentiation and ecological filtering are primary ecological processes that shape community assembly, but their relative importance remains poorly understood. Analyses of the distributions of functional traits can provide insight into the community structure generated by these processes. We predicted the trait distributions expected under the ecological processes of niche differentiation and environmental filtering, then tested these predictions with a dataset of 4672 trees located in nine 1-ha plots of tropical rain forest in French Guiana. Five traits related to leaf function (foliar N concentration, chlorophyll content, toughness, tissue density and specific leaf area), and three traits related to stem function (trunk sapwood density, branch sapwood density, and trunk bark thickness), as well as laminar surface area, were measured on every individual tree. There was far more evidence for environmental filtering than for niche differentiation in these forests. Furthermore, we contrasted results from species-mean and individual-level trait values. Analyses that took within-species trait variation into account were far more sensitive indicators of niche differentiation and ecological filtering. Species-mean analyses, by contrast, may underestimate the effects of ecological processes on community assembly. Environmental filtering appeared somewhat more intense on leaf traits than on stem traits, whereas niche differentiation affected neither strongly. By accounting for within-species trait variation, we were able to more properly consider the ecological interactions among individual trees and between individual trees and their environment. In so doing, our results suggest that the ecological processes of niche differentiation and environmental filtering may be more pervasive than previously believed.
ISSN: 0030-1299

hal-01032397
https://hal.archives-ouvertes.fr/hal-01032397
DOI : 10.1111/j.1600-0706.2010.19110.x

Éditeur(s) : HAL CCSD Springer Verlag/EDP Sciences
Résumé : International audience
Context: Woodcutting is a very old technology but scientific research is scarce on the subject. In the last 50 years much work on basic mechanisms as well as industrial processes has been done in France. Aims: The specific nature of wood introduces strong differences between wood and metal cutting processes. The paper focuses on French teams' contributions. Results: The basic aspects of the tool–material interaction for different basic modes in woodcutting are highlighted. In primary conversion such as sawing, veneer cutting or green wood chipping, huge progress comes from automation and the possibility of linking the process to log and product quality through new sensors. In secondary processing much has been done on the links between the cutting process, surface qualification and the properties of these surfaces for further processing, such as gluing or coating. Tool wear depends on the cutting process, timber quality, and species. Trade-offs are required in tool technology and coating technologies may improve tool life. Conclusion: A large amount of knowledge and innovation has come from 50 years of worldwide research effort, with France being particularly active in this period. The transfer of skills from metals cutting industry was often a key, but much is needed to move closer to both metal cutting sector and woodcutting skills among craftsmen.
ISSN: 1286-4560

hal-01135156
https://hal.archives-ouvertes.fr/hal-01135156
https://hal.archives-ouvertes.fr/hal-01135156/document
https://hal.archives-ouvertes.fr/hal-01135156/file/Wood_machining_focus_French_research_Thibaut_al_2015.pdf
DOI : 10.1007/s13595-015-0460-2

Éditeur(s) : Elsevier Science Bv
Résumé : The breakup of Pangea and onset of growth of the Pacific plate led to several paleoenvironmental feedbacks, which radically affected paleoclimate and ocean chemistry during the Jurassic. Overall, this period was characterized by intense volcanic degassing from large igneous provinces and circum-Panthalassan arcs, new oceanic circulation patterns, and changes in heat and humidity transports affecting continental weathering. Few studies, however, have attempted to unravel the global interactions linking these processes over the long-term. In this paper, we address this question by documenting the global changes in continental drainage and surface oceanic circulation for the whole Jurassic period. For this purpose, we present 53 new neodymium isotope values (εNd(t)) measured on well-dated fossil fish teeth, ichthyosaur bones, phosphatized nodules, phosphatized ooids, and clastic sediments from Europe, western Russia, and North America. Combined with an extensive compilation of published εNd(t) data, our results show that the continental sources of Nd were very heterogeneous across the world. Volcanic inputs from a Jurassic equivalent of the modern Pacific Ring of Fire contributed to radiogenic εNd(t) values (− 4 ε-units) in the Panthalassa Ocean. For the Tethyan Ocean, the average surface seawater signal was less radiogenic in the equatorial region (− 6.3), and gradually lower toward the epicontinental peri-Tethyan (− 7.4), western Russian (− 7.4) and Euro-Boreal seas (− 8.6). Different Nd sources contributed to this disparity, with radiogenic Nd influxes from westward Panthalassan currents or juvenile volcanic arcs in open oceanic domains, and substantial unradiogenic inputs from old Laurasian and Gondwanan shields for the NW Tethyan platforms. Overall, the εNd(t) values of Euro-Boreal, peri-Tethyan, and western Russian waters varied quite similarly through time, in response to regional changes in oceanic circulation, paleoclimate, continental drainage, and volcanism. Three positive shifts in εNd(t) values occurred successively in these epicontinental seas during the Pliensbachian, in the Aalenian-Bathonian interval, and in the mid-Oxfordian. The first and third events are interpreted as regional incursions of warm surface radiogenic currents from low latitudes. The Aalenian-Bathonian shift seems linked to volcanic outbursts in the NW Tethys and/or circulation of deep currents resulting from extensional events in the Hispanic Corridor and reduced influences of boreal currents crossing the Viking Corridor. In contrast, the εNd(t) signals decreased and remained very low (< − 8) during the global warming events of the Toarcian and Late Oxfordian - Early Tithonian intervals. In these greenhouse contexts, a latitudinal expansion of humid belts could have extended the drainage pathways toward boreal Nd sources of Precambrian age and increased the supply of very unradiogenic crustal-derived inputs to seawater. Finally, a brief negative εNd(t) excursion recorded in parallel with regional drops in seawater temperature suggests that southward circulation of cold unradiogenic Arctic waters occurred in the NW Tethys in the Callovian - Early Oxfordian. All these results show that changes in surface oceanic circulation resulting from the Pangean breakup could have regionally impacted the evolution of seawater temperatures in the NW Tethys.
Gondwana Research (1342-937X) (Elsevier Science Bv), 2015-06 , Vol. 27 , N. 4 , P. 1599-1615

Droits : 2014 International Association for Gondwana Research. Published by Elsevier B.V. All rights reserved
http://archimer.ifremer.fr/doc/00179/29015/27443.pdf
DOI:10.1016/j.gr.2014.02.006
http://archimer.ifremer.fr/doc/00179/29015/

Éditeur(s) : HAL CCSD Wiley
Résumé : SUBSURF
International audience
Similarity of form between subaerial and submarine landscapes affected by erosion could suggest similarities in the process of erosion, such as by runoff and sedimentary flows, respectively. On the other hand, if aspects of form vary, its characteristics may be used to identify the environmental origin of erosion. Towards these goals, this contribution addresses the morphology of submarine volcanoes (seamounts) with widely differing histories of erosion. One set from the Pacific Ocean never exposed above sea level includes Cretaceous-age seamounts near Hawai'i (including Apu'upu'u Seamount), two seamounts of < 3 Ma in age near a mid-ocean ridge and the 11-4 Ma Jasper Seamount. These seamounts are all isolated from continents and hence from any erosion associated with mass wasting of unstable terrigenous deposits. In such isolated submarine environments, surfaces erode slowly from in situ weathering, mass wasting and scouring by sedimentary flows initiated by slope failure in pelagic or bedrock materials. The Pacific seamounts are compared with Valencia Seamount in the western Mediterranean, exposed subaerially for 100-400 k.y. during the Messinian Salinity Crisis before 5 Ma. Multibeam and deeply towed sidescan sonar data of Valencia Seamount reveal features typical of subaerial erosion of volcanic islands, such as canyons and relatively uneroded sectors (planezes) between them. Using a simple topographical reconstruction, the apparent erosion depth typically reaches 100 m within canyons and up to 180 m in places. Whereas the younger Pacific seamounts do not show these erosional features, the much older Cretaceous seamounts do have channels, which in one example suggests up to 200 m of incision. Both Valencia and Apu'upu'u seamounts have channel longitudinal profiles that are steep and typically linear to concave upwards. The erosion depth of Apu'upu'u Seamount is significant, despite the seamount's persistent submarine environment, because of its greater age, steeper flanks and greater contributing areas to channels compared with Valencia Seamount. These results illustrate that the channel morphology resulting from submarine erosion can become similar to that produced by subaerial erosion given sufficient time.
ISSN: 0950-091X

hal-00411425
https://hal.archives-ouvertes.fr/hal-00411425
DOI : 10.1111/j.1365-2117.2008.00355.x

Éditeur(s) : HAL CCSD Copernicus Publications
Résumé : This workshop report describes plans for scientific drilling in the Samail ophiolite in Oman in the context of past, current, and future research. Long-standing plans to study formation and evolution of the Samail crust and upper mantle, involving igneous and metamorphic processes at an oceanic spreading center, have been augmented by recent interest in ongoing, low temperature processes. These include alteration and weathering, and the associated sub-surface biosphere supported by chemical potential energy due to disequilibrium between mantle peridotite and water near the surface. This interest is motivated in part by the possibility of geological carbon capture and storage via engineered, accelerated mineral carbonation in Oman.
ISSN: 1816-8957

hal-00858243
https://hal.archives-ouvertes.fr/hal-00858243
DOI : 10.2204/iodp.sd.15.10.2013