Éditeur(s) : HAL CCSD
Résumé : The Karakorum Fault zone (KFZ), lying in the west of the Tibetan plateau, is an important dextral strike-slip fault and the important northern geological boundary of the west Himalaya. In the AyilaRi' gyu Range-Gai Basin area lying in the southeast of the KFZ, Ar-40/Ar-39 thermochronologic analysis was performed on the syn-tectonic minerals in the, metamorphic rocks in the Karakorum ductile shear zone, with the base of petrology and deformation structure researches. According to the microstructure features, the minerals in the shear zone recorded the continuous deformation from high ( > 600 degrees C) to low temperature ( < 250 degrees C) appeared as that the nearly horizontal dextral shearing has transformed into the oblique dextral normal slip, made the greenschist facies of deformation stack oil the early medium-high temperature deformation, indicated the uplift during the slip. The thermochronologic revealed the continuous shear process from the early Miocene to 4Ma at least, which containing three rapid cooling stage: from 25 similar to 22Ma to 21 similar to 18Ma, the deformation locally stopped or slower in the, shallow high temperature shear process; from 15Ma to 12Ma, the rapid uplift of the AyilaRi' gyu Range, the initial formation of the Gar Basin together with the main deep incision of river during the strip-slip of the KFZ; since 9Ma, the AyilaRi' gyu Range has increased the rapid uplift and the Gar Basin has formed finally. According to the different levels of deformation and the dextral displacement of the surface landform with different ages, the long term slip rate and the uplift rate indicated the intense dextral strike slip and uplift associated since the late Quarternary Period.
Acta Petrologica Sinica

hal-00411572
https://hal.archives-ouvertes.fr/hal-00411572

Éditeur(s) : HAL CCSD
Résumé : International audience
Mylonite bodies are exhumed extensions at depth of shallow structural level brittle faults. They are characterised by intense strain localisation involving large volumes of middle to lower continental crust. The analysis of shear zone geometry and microstructures is a useful tool to decipher deformation kinematics, though finite strain estimation is still relatively qualitative. Timing of the deformation has also been the focus of numerous studies using the complete spectrum of geochronometers. However, only rare examples provide geochronological data that can be unambiguously interpreted and cooling, recrystallisation and neocrystallisation are difficult to tell from each other. Thus, time-scales over which major mylonite zones develop and remain active under ductile conditions as well as their strain rate often remain poorly documented. We investigated two sections across the South-Armorican Shear Zone (SASZ), a crustal-scale pluri-km thick dextral shear zone active during a single tectonic event of late-Variscan age and associated with syntectonic granite emplacement.. Finite strain profiles on these cross-sections, quantified from average Quartz grain-size in 34 samples, show a strong deformation partitioning towards the center of the SASZ, with a decrease, for each section, from 150µm in slightly deformed zones to less than 7-5 µm in the core of the ultramylonite. Furthermore, toward the core of the SASZ, development of a penetrative shear band network progressively eliminates lenses of less deformed rocks and results in homogenisation of the Quartz grain sizes. In parallel, we performed in-situ UV-laser Ar/Ar dating on the fabric-forming white micas. White micas population can be decomposed into inherited muscovites carried by the folation and newly-formed, syn-tectonic substituted phengites located along the shear bands yielding 2 age groups for each sample. Along the profiles, the difference between these two ages evolves from 10-15 Ma in weakly deformed domains to zero toward the SASZ core. In addition, mylonite-forming phengites yielded the same age irrespectively of their position on the section or of the rock strain.. On the regional point of view, this study brings deformation-ages for the late-orogenic evolution of the South Armorican domain. Strain accumulated along the SASZ in a time-span extending to 300-298 Ma, i.e. contemporaneously with the activity of nearby major extensional shear zones. These results support a new model of crustal-scale shear zone activity, where the whole body of the shear zone is active throughout its history (defined as the largest age difference through the section), i.e. the actively deforming zone does not get progressively narrower. The strain distribution nevertheless evolves with time, with an increasingly large fraction partitioned in the ultramylonitic core.
EGU General Assembly
Vienne, Austria

insu-00839320
https://hal-insu.archives-ouvertes.fr/insu-00839320
BIBCODE : 2010EGUGA..12.9881A

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
Observations from deep boreholes at several locations worldwide, laboratory measurements of frictional strength on quartzo-feldspathic materials, and earthquake focal mechanisms indicate that crustal faults are strong (apparent friction μ ≥ 0.6). However, friction experiments on phyllosilicate-rich rocks and some geophysical data have demonstrated that some major faults are considerably weaker. This weakness is commonly considered to be characteristic of mature faults in which rocks are altered by prolonged deformation and fluid-rock interaction (i.e., San Andreas, Zuccale, and Nankai Faults). In contrast, in this study we document fault weakening occurring along a marly shear zone in its infancy (<30 m displacement). Geochemical mass balance calculation and microstructural data show that a massive calcite departure (up to 50 vol %) from the fault rocks facilitated the concentration and reorganization of weak phyllosilicate minerals along the shear surfaces. Friction experiments carried out on intact foliated samples of host marls and fault rocks demonstrated that this structural reorganization lead to a significant fault weakening and that the incipient structure has strength and slip behavior comparable to that of the major weak faults previously documented. These results indicate that some faults, especially those nucleating in lithologies rich of both clays and high-solubility minerals (such as calcite), might experience rapid mineralogical and structural alteration and become weak even in the early stages of their activity.
ISSN: 0278-7407

hal-01211481
https://hal.archives-ouvertes.fr/hal-01211481
DOI : 10.1002/2014TC003716

Éditeur(s) : HAL CCSD Nature Publishing Group
Résumé : International audience
The variation of elastic- wave velocities as a function of the direction of propagation through the Earth's interior is a widely documented phenomenon called seismic anisotropy. The geometry and amount of seismic anisotropy is generally estimated by measuring shearwave splitting, which consists of determining the polarization direction of the fast shear- wave component and the time delay between the fast and slow, orthogonally polarized, waves. In subduction zones, the teleseismic fast shear- wave component is oriented generally parallel to the strike of the trench(1), although a few exceptions have been reported (Cascadia(2) and restricted areas of South America(3,4)). The interpretation of shear- wave splitting above subduction zones has been controversial and none of the inferred models seems to be sufficiently complete to explain the entire range of anisotropic patterns registered worldwide(1). Here we show that the amount and the geometry of seismic anisotropies measured in the forearc regions of subduction zones strongly depend on the preferred orientation of hydrated faults in the subducting oceanic plate. The anisotropy originates from the crystallographic preferred orientation of highly anisotropic hydrous minerals (serpentine and talc) formed along steeply dipping faults and from the larger- scale vertical layering consisting of dry and hydrated crust - mantle sections whose spacing is several times smaller than teleseismic wavelengths. Fault orientations and estimated delay times are consistent with the observed shear- wave splitting patterns in most subduction zones.
ISSN: 0028-0836

hal-00412016
https://hal.archives-ouvertes.fr/hal-00412016
DOI : 10.1038/nature07376

Éditeur(s) : HAL CCSD Oxford University Press (OUP): Policy B - Oxford Open Option A Oxford University Press (OUP)
Résumé : International audience
Peridotite xenoliths exhumed by Quaternary alkaline magmatism in the Tahalgha district, southern Hoggar, represent fragments of the subcontinental lithospheric mantle beneath the boundary between the two major structural domains of the Tuareg Shield: the ‘Polycyclic Central Hoggar’ to the east and the ‘Western Hoggar’, or ‘Pharusian Belt’, to the west. Samples were collected from volcanic centres located on both sides of a major lithospheric shear zone at 4°35' separating these two domains. Although showing substantial variations in their deformation microstructures, equilibrium temperatures and modal and chemical compositions, the studied samples do not display any systematic changes of these features across the 4°35' fault. The observed variations rather record small-scale heterogeneities distributed throughout the study area and reflecting the widespread occurrence of vein conduits and metasomatized wall-rocks related to trans-lithospheric melt circulation during the Cenozoic. These features include partial annealing of pre-existing deformation microstructures, post-deformation metasomatic reactions, and trace-element enrichment, coupled with heating from 750–900°C (low-temperature lherzolites) to 900–1150°C (intermediate-T lherzolites and high-T harzburgites and wehrlites). Trace-element modelling confirms that the range of rare earth element (REE) variations observed in the Tahalgha clinopyroxenes may be accounted for by reactive porous flow involving a single stage of basaltic melt infiltration into a light REE (LREE)-depleted protolith. Whole-rock compositions record the final entrapment of disequilibrium metasomatic melts upon thermal relaxation of the veins–wall-rock system. The striking correlations between equilibrium temperatures and trace-element enrichment favor a scenario in which the high-temperature peridotites record advective heat transport along melt conduits, whereas the intermediate- and low-temperature lherzolites reflect conductive heating of the host Mechanical Boundary Layer. This indicates that the lithosphere did not reach thermal equilibrium, suggesting that the inferred heating event was transient and was rapidly erased by thermal relaxation down to the relatively low-temperature present-day geotherm. The low-T (<900°C) deformed lherzolites (porphyroclastic to equigranular) are characterized by only incipient annealing and LREE-depleted clinopyroxene compositions. They were only weakly affected by the Cenozoic events and could represent relatively well-preserved samples from rejuvenated Pan-African lithosphere. Extensive lithospheric rejuvenation occurred either regionally during the Pan-African orogeny, as a result of lithospheric delamination or thermomechanical erosion after thickening, or more locally along the meridional shear zones. The low-T Tahalgha lherzolites are comparable with lherzolites from Etang de Lherz, southern France, interpreted as lithospheric mantle rejuvenated by melt-induced refertilization during a late stage of the Variscan orogeny.
ISSN: 0022-3530

hal-01107410
https://hal.archives-ouvertes.fr/hal-01107410
DOI : 10.1093/petrology/egu056

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
The ENE-WSW Autun Shear Zone in the northeastern part of the French Massif Central has been interpreted previously as a dextral wrench fault. New field observations and microstructural analyses document a NE-SW stretching lineation that indicates normal dextral motions along this shear zone. Further east, similar structures are observed along the La Serre Shear Zone. In both areas, a strain gradient from leucogranites with a weak preferred orientation to highly sheared mylonites supports a continuous Autun-La Serre fault system. Microstructural observations, and shape and lattice-preferred orientation document high-temperature deformation and magmatic fabrics in the Autun and La Serre granites, whereas low- to intermediate-temperature fabrics characterize the mylonitic granite. Electron microprobe monazite geochronology of the Autun and La Serre granites yields a ca. 320 Ma age for pluton emplacement, while mica 40Ar-39Ar datings of the Autun granite yield plateau ages from 305 to 300 Ma. The ca. 300 Ma 40Ar-39Ar ages, obtained on micas from Autun and La Serre mylonites, indicate the time of the mylonitization. The ca. 15-Ma time gap between pluton emplacement and deformation along the Autun-La Serre fault system argue against a synkinematic pluton emplacement during late orogenic to postorogenic extension of the Variscan Belt. A ductile to brittle continuum of deformation is observed along the shear zone, with Lower Permian brittle faults controlling the development of sedimentary basins. These results suggest a two-stage Late Carboniferous extension in the northeastern French Massif Central, with regional crustal melting and emplacement of the Autun and La Serre leucogranites around 320 Ma, followed, at 305-295 Ma, by ductile shearing, normal brittle faulting, and subsequent exhumation along the Autun-La Serre transtensional fault system.
ISSN: 1437-3254

insu-00596918
https://hal-insu.archives-ouvertes.fr/insu-00596918
https://hal-insu.archives-ouvertes.fr/insu-00596918/document
https://hal-insu.archives-ouvertes.fr/insu-00596918/file/Article_Morvan_v_INIST.pdf
DOI : 10.1007/s00531-011-0673-z

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
In Western Mediterranean, the Rif belt in Morocco is part of the Gibraltar Arc built during the Tertiary in the framework of Eurasia-Africa convergence. The structural and metamorphic evolution of the internal units of this belt as well as their timing, crucial to constrain the geodynamic evolution of the Alboran Sea, is still largely debated.Our study on the Ceuta Peninsula (Northern Rif) provides new structural, petrological and geochronological data (U-Th-Pb, Ar-Ar), which allow to precise the tectono-metamorphic evolution of the Lower Sebtides metamorphic units with:(1) a syn-metamorphic thrusting event developed under granulite facies conditions (7–10 kbar and 780–820 °C). A major thrust zone, the Ceuta Shear Zone, drove the emplacement of metapelites and peridotitic lenses from the Ceuta Upper Unit over the orthogneisses of the Monte Hacho Lower Unit. This compressional event ended during the Upper Oligocene.(2) an extensional event developed at the boundary between amphibolite and greenschist facies conditions (400–550 °C and 1–3 kbar). During this event, the Ceuta Shear Zone has been reactivated as a normal fault. Normal ductile shear zones contributed to the final exhumation of the metamorphic units during the Early Miocene.We propose that the compressional event is related to the formation of an orogenic wedge located in the upper plate, in a backward position, of the subduction zone driving the geodynamic evolution of the Alboran domain. In this context, the episode of lithospheric thinning could be related to the opening of the Alboran basin in a back-arc position.Furthermore, unlike the previous models proposed for the Rif belt, the tectonic coupling between mantle peridotites and crustal metamorphic rocks occurred in Ceuta Peninsula at a depth of 20–30 km under high temperature conditions, before the extensional event, and thus cannot be related to the back-arc extension.
ISSN: 0040-1951

insu-01682810
https://hal-insu.archives-ouvertes.fr/insu-01682810
DOI : 10.1016/j.tecto.2017.11.028

Éditeur(s) : HAL CCSD
Résumé : Thrusting fault zone in foreland basins are characterized by highly foliated zones generally enriched in phyllosilicates which can play a major role on the mechanical behaviour of the fault. In this context, investigations of synkinematic clay minerals permit to determine the origin of the fluid from which they precipitated as well as the mechanisms of deformation. Our study is focused on clay mineral assemblages (illite and chlorite) in a major thrust fault located in the Monte Perdido massif (southern Pyrenees), a shallow thrust that affects upper cretaceous-paleocene platform carbonates and lower Eocene marls and turbidites. It implied 3 km of displacement of the Monte Perdido thrust unit with respect to the underlying Gavarnie unit. In this area the cleavage development by pressure-solution is linked to the Monte Perdido and Gavarnie thrust activity. The core zone of the fault, about 6 m thick, consists of an interval of intensely deformed clay-bearing rocks bounded by major shear surfaces. The deformed sediment is markedly darker than the protolith. Calcite-quartz shear veins along the shear planes are abundant. Detailed SEM and TEM observations of highly deformed fault zone samples indicate that clay mineral enrichment in the core zone of the fault is not only related to passive increase by pressure-solution mechanism but that dissolution-recrystallization of phyllosilicates occurs during deformation. A mineral segregation is observed in the highly deformed zone. Newly formed 2M 1 muscovite is present along the cleavage whereas IIb chlorite crystals fill SV2 shear veins suggesting syntectonic growth of phyllosilicates in the presence of fluids in low-grade metamorphic conditions. These mineralogical reactions act as weakening processes and would favour Monte Perdido fault creeping.
Swiss Journal of Geosciences

hal-00795553
https://hal.archives-ouvertes.fr/hal-00795553
DOI : 10.1007/s00015-012-0098-0

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
[1] Zircons and monazites from 6 samples of the North Ayilari dextral shear zone (NAsz), part of the Karakorum fault zone (KFZ), have been dated with the U-Th-Pb method, using both ID-TIMS and SIMS techniques. The ages reveal (1) inheritance from several events spanning a long period between the late Archean and the Jurassic; (2) an Eocene-Oligocene magmatic event (similar to 35-32 Ma); (3) an Oligo-Miocene magmatic event (similar to 25-22 Ma), at least partly synkinematic to the right-lateral deformation; and (4) a period of metamorphism metasomatism (similar to 22-14 Ma) interpreted as thermal and fluid advection in the shear zone. The Labhar Kangri granite located similar to 375 km farther Southeast along the KFZ is dated at 21.1 +/- 0.3 Ma. Such occurrence of several Oligo-Miocene granites along the KFZ, some of which show evidence for synkinematic emplacement, suggests that the fault zone played an important role in the genesis and /or collection of crustal melts. We discuss several scenarios for the onset and propagation of the KFZ, and offset estimates based on the main sutures zones. Our preferred scenario is an Oligo-Miocene initiation of the fault close to the NA range, and propagation along most of its length prior to similar to 19 Ma. In its southern half, the averaged long-term fault-rate of the KFZ is greater than 8 to 10 mm/a, in good agreement with some shorter-term estimates based on the Indus river course, or Quaternary moraines and geodesy. Our results show the KFZ cannot be considered as a small transient fault but played a major role in the collision history.
ISSN: 0278-7407

hal-00412570
https://hal.archives-ouvertes.fr/hal-00412570
DOI : 10.1029/2007TC002184

Éditeur(s) : HAL CCSD Elsevier
Résumé : Hot collisional orogens are characterized by abundant syn-kinematic granitic magmatism that profoundly affects their tectono-thermal evolutions. Voluminous granitic magmas, emplaced between 360 and 270 Ma, played a visibly important role in the evolution of the Variscan Orogen. In the Limousin region (western Massif Central, France), syntectonic granite plutons are spatially associated with major strike-slip shear zones that merge to the northwest with the South Armorican Shear Zone. This region allowed us to assess the role of magmatism in a hot transpressional orogen. Microstructural data and U/Pb zircon and monazite ages from a mylonitic leucogranite indicate synkinematic emplacement in a dextral transpressional shear zone at 313 +/- 4 Ma. Leucogranites are coeval with cordierite-bearing migmatitic gneisses and vertical lenses of leucosome in strike-slip shear zones. We interpret U/Pb monazite ages of 315 +/- 4 Ma for the gneisses and 316 +/- 2 Ma for the leucosomes as the minimum age of high-grade metamorphism and migmatization respectively. These data suggest a spatial and temporal relationship between transpression, crustal melting, rapid exhumation and magma ascent, and cooling of high-grade metamorphic rocks.;Some granites emplaced in the strike-slip shear zone are bounded at their roof by low dip normal faults that strike N-S, perpendicular to the E-W trend of the belt. The abundant crustal magmatism provided a low-viscosity zone that enhanced Variscan orogenic collapse during continued transpression, inducing the development of normal faults in the transpression zone and thrust faults at the front of the collapsed orogen.
ISSN: 0040-1951

hal-00445260
https://hal.archives-ouvertes.fr/hal-00445260
DOI : 10.1016/j.tecto.2009.03.022

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
While vertical motion induced by long-term geological loads is often used to estimate the flexural rigidity of the lithosphere, we intend to evaluate the shear rigidity of the lithosphere using horizontal motion. Our approach considers that the rigidity of the lithosphere may be defined as its resistance to horizontal tectonic lateral forces. In this case, a spatial distribution of an effective shear rigidity can be estimated from the analysis of the interseismic velocity fields. We consider the Western United States zone where weakly strained areas (e.g., the Sierra Nevada) are connected with areas of large strain rate (e.g. San Andreas Fault system). By inverting interseismic strain distribution measured by geodetic methods, we infer the effective shear rigidity of the lithosphere. The forward problem is defined using the equations of linear elasticity. The inversion relies on the minimization of the sum of a quadratic measure of the differences between measured and modelled velocity fields. The functional also includes regularization terms for the parameters of the model. The gradient of the functional with respect to the minimization parameters is computed using an adjoint formulation. This permits the treatment of large dimensional minimization problems. Finally, a measure of the uncertainty of our inversion is illustrated through the covariance matrix of the parameters at the optimum. The optimization chart is validated on two synthetic velocity distributions. Then, the effective shear rigidity variations of the Western United States are estimated using the CMM3 interseismic velocities. The inversion displays low effective rigidities along the San Andreas Fault system, the Mojave Desert and in the Eastern California Shear Zone, while rigid areas are found in the Sierra Nevada and in the South Basin and Range. Finally, we discuss the differences between our strain rate and rigidity maps with previously published results for the Western United States.
ISSN: 0040-1951

Droits : http://hal.archives-ouvertes.fr/licences/copyright/
hal-01505024
https://hal.archives-ouvertes.fr/hal-01505024
https://hal.archives-ouvertes.fr/hal-01505024/document
https://hal.archives-ouvertes.fr/hal-01505024/file/Paper_tectophysics.pdf
DOI : 10.1016/j.tecto.2017.03.015

Éditeur(s) : HAL CCSD Ocean Drilling Programm
Résumé : This paper provides a summary of postcruise scientific results from Ocean Drilling Program (ODP) Leg 209 available to date, building upon shipboard observations and syntheses summarized in the Leg 209 Initial Results volume. During Leg 209, 19 holes were drilled at 8 sites along the Mid-Atlantic Ridge from 14°43´ to 15°44´N, mainly in residual mantle peridotite intruded by gabbroic rocks, in order to understand the tectonic and structural processes responsible for formation of oceanic lithosphere with abundant residual peridotite exposed on the seafloor coupled with a relatively low proportion of volcanic rocks. Based on proportions of recovered lithologies, the entire area may be underlain by mantle peridotite with ~20%–40% gabbroic intrusions and impregnations. Impregnated peridotites with olivine + two pyroxenes + plagioclase + spinel that apparently formed in equilibrium probably record crystallization from primitive mid-ocean-ridge basalt at pressures of 0.5–0.6 GPa. Metamorphic equilibria record isobaric cooling to ~1100°C at this pressure. Thus, the conductively cooled thermal boundary layer beneath the Mid-Atlantic Ridge in this region is >15 km thick. Combined crystallization and reaction with residual peridotite formed a series of impregnated peridotites recording increasing Na content at nearly constant Mg#; this process could explain some of the variation in fractionation-corrected Na (e.g., Na = 8.0) observed in mid-ocean-ridge basalts. Clinopyroxene textures and compositions record such impregnation processes, and they are particularly well documented for Site 1274. Other Leg 209 gabbroic rocks formed from extensive crystallization of highly evolved melts, indicating that a substantial proportion of melt entering the thermal boundary layer crystallizes entirely beneath the seafloor, with no volcanic equivalent. Alteration of peridotites occurred over a range of temperatures and is the result of three distinct processes: rock-dominated serpentinization with formation of brucite in olivine-rich lithologies, fluid-dominated serpentinization with formation of magnetite and no brucite, and fluid-dominated talc alteration with addition of SiO2 as well as H2O and oxygen. The latter two processes also exhibit detectable trace element metasomatism that is distinct in its character from the igneous impregnation described in the previous paragraph. Microstructures show that most residual peridotites were not ductilely deformed at temperatures less than ~1200°C. Structural and paleomagnetic data require tectonic rotations of relatively undeformed blocks; some rotations probably exceeded 60° around nearly horizontal axes parallel to the rift axis. Rotations occurred along several generations of high-temperature mylonitic shear zones extending deeper than 15 km depth and numerous faults at lower temperature. Early formed shear zones and faults were passively rotated around later features; such a process could have produced low-angle fault surfaces without slip on low-angle faults. This region provides end-member examples of processes that are common at many or most slow-spreading ridges. Osmium isotope ratios indicate an ancient history of depletion for residual peridotites from the 14°–16°N region along the Mid-Atlantic Ridge. Though depleted Os isotope ratios in peridotite have been reported elsewhere along the global ridge system, the values from this region are among the most depleted. In general, Os isotope ratios from mid-ocean-ridge basalts are systematically more radiogenic than Os isotope ratios from ridge peridotite samples, suggesting a polygenetic heterogeneous source for mid-ocean-ridge basalts. Geochemical studies of zircons from Leg 209 gabbroic rocks and impregnated peridotites, together with other ridge and arc-related zircons, indicate that ridge zircons have systematically lower fractionation-corrected U and Th concentrations compared to arc zircons. This observation provides a tool for interpreting the tectonic provenance of ancient detrital zircons and indicates an arclike provenance for Hadean detrital zircons. Geobiological studies and aerobiological studies were also undertaken during Leg 209. The geobiological work found no measurable microbial enhancement of olivine dissolution rate, possibly because the samples from Leg 209 were sterile. The aerobiological study determined that dust from North Africa, collected from the derrick of the JOIDES Resolution during Leg 209, contains a variety of abundant microorganisms.
Proceedings ODP, scientific results, 209

hal-00407966
https://hal.archives-ouvertes.fr/hal-00407966
DOI : 10.2973/odp.proc.sr.209.001.2007

Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
Analysis of the microstructures in the km-scale mantle shear zone that separates the northern and the central parts of the Lanzo peridotite massif provides evidence of an evolution in time and space of deformation processes accommodating shearing in the shallow mantle within an extensional setting. This shear zone displays an asymmetric distribution of deformation facies. From south to north, gradual reorientation of the foliation of coarse porphyroclastic plagioclase-bearing peridotites is followed by development of protomylonites, mylonites, and mm-scale ultramylonite bands. A sharp grain size gradient marks the northern boundary. Early deformation under near-solidus conditions in the south is recorded by preservation of weakly deformed interstitial plagioclase and almost random clinopyroxene and plagioclase crystal orientations. Feedback between deformation and melt transport probably led to melt focusing and strain weakening in the shear zone. Overprint of melt-rock reaction microstructures by solid-state deformation and decrease in recrystallized grain size in the protomylonites and mylonites indicate continued deformation under decreasing temperature. Less enriched peridotite compositions and absence of ultramafic dykes or widespread melt-impregnation microstructures north of the shear zone and clinopyroxene and amphibole enrichment in the mylonites and ultramylonites suggest that the shear zone acted as both a thermal barrier and a high-permeability channel for late crystallizing fluids. These observations, together with chemical data indicating faster cooling of central Lanzo relative to the northern body, corroborate that this shear zone is a mantle detachment fault. All deformation facies have crystal preferred orientations consistent with deformation by dislocation creep with dominant activation of the (010)[100] and (100)[001] systems in olivine and orthopyroxene, respectively. Dynamic recrystallization produces dispersion of olivine CPO but not a change of dominant deformation mechanism. Evidence for activation of grain boundary sliding is limited to mm-scale ultramylonite bands, where solid-state reactions produced very fine grained polymineralic aggregates. Except for these latest stages of deformation, strain localization does not result from the microstructural evolution; the grain size decrease is a consequence of the need to deform a rock volume whose strength continuously increases because of decreasing temperature conditions. Strain localization in the intermediate levels thus essentially results from the more localizing behavior of both the deep, partially molten, and shallow parts of this extensional shear zone distribution.
ISSN: 1525-2027

hal-00644844
https://hal.archives-ouvertes.fr/hal-00644844
DOI : 10.1029/2011GC003627

Éditeur(s) : HAL CCSD Wiley-Blackwell
Résumé : International audience
This paper aims to decipher the thermal evolution of the Montagne Noire Axial Zone (MNAZ,southern French Massif Central) gneiss core and its metasedimentary cover through determination ofP–T paths and temperature gradients. Migmatitic gneiss from the core of the dome record a clock-wise evolution culminating at 725 25 °C and 0.8 0.1 GPa with partial melting, followed by adecompression path with only minor cooling to 690 25° C and 0.4 0.1 GPa. Field structuralanalyses as well as detailed petrological observations interpreted in a petrogenetic grid indicate thatthe cover sequence experienced LP-HT metamorphism at <0.4 GPa. Apparent thermal gradientswithin the cover were determined with garnet–biotite thermometry and Raman Spectroscopy on Car-bonaceous Matter. High-temperature apparent gradients (e.g. 530 °C km1 along one transect) areexplained by late brittle–ductile extensional shearing evidenced by phyllonites that post-date peakmetamorphism. In areas where normal faults are less abundant and closely spaced, gradients of 20to 50 °C km1 are calculated. These gradients can be accounted for by a combination of domeemplacement and ductile shearing (collapse of isotherms), without additional heat input. Finally, thethermal evolution of the MNAZ is typical for many gneiss domes worldwide as well as with otherLP-HT terranes in the Variscides.
ISSN: 0263-4929

Droits : http://creativecommons.org/licenses/by-nc-nd/
insu-01290388
https://hal-insu.archives-ouvertes.fr/insu-01290388
https://hal-insu.archives-ouvertes.fr/insu-01290388/document
https://hal-insu.archives-ouvertes.fr/insu-01290388/file/jmg12188.pdf
DOI : 10.1111/jmg.12188

Éditeur(s) : HAL CCSD
Résumé : The northern Mirdita ophiolite massifs in Albanian Dinarides formed at a slow-spreading ridge, active during the Jurassic (160–165 Ma). They share a common horizontal Jurassic–Lower Cretaceous sedimentary cover showing that they were not deeply and intrinsically affected by later Alpine thrusting. The western massifs of Mirdita, first oceanic core complex (OCC) and detachment shear zone described in ophiolites, compare with OCCs in slow-spreading ridges and provide continuous exposure of the deep internal structure of this system, revealing its kinematics, thanks to detailed structural mapping in peridotites and gabbros. The Mirdita detachments root in the Moho transition zone (MTZ), a weak zone at the top of asthenospheric mantle, where basaltic melts impregnate dunites. The OCC domes are plagioclase-amphibole–bearing mylonitic peridotites, ∼400 m thick, grading downward within 200 m to harzburgitic mantle. The mylonitic detachments crossed Moho beneath a NNE-SSW–trending ridge. On the western side of OCC domes, the hanging wall of the ridge, crustal gabbros, and basalts are still preserved, despite being deeply affected by hydrothermal alteration. From there, the partially molten MTZ was detached as a shear zone, mixing with lower gabbros. The OCC emerged, migrating upsection and eastward over 5 km. Finally, the OCC front is observed in hornblende-rich syntectonic mylonites derived from upper gabbros and from the overlying former lid. Serpentinization is static within these mylonites. A low-temperature detachment fault is expressed as a sheared antigoritic mélange at the margin of the mylonitic shear zone. Asthenospheric flow in the harzburgitic mantle beneath the ridge of origin has been preserved below the OCC rooting. The dominant asthenospheric flow direction trends parallel to the ridge axis. This mantle flow rotates over 200 m into the low-temperature mylonitic detachments, where OCC motion turns transversal to the ridge. Crystal preferred orientation measurements on six samples point to brown hornblende crystal growth during mylonitic flow and illustrate the change of olivine intra-crystalline slip system in mylonites compared to porphyroclastic harzburgite.
ISSN: 1553-040X

hal-01504440
https://hal.archives-ouvertes.fr/hal-01504440
DOI : 10.1130/GES01383.1

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
The chemical and isotopic compositions of clay minerals such as illite and chlorite are commonly used to quantify diagenetic and low-grade metamorphic conditions, an approach that is also used in the present study of the Monte Perdido thrust fault from the South Pyrenean fold-and-thrust belt. The Monte Perdido thrust fault is a shallow thrust juxtaposing upper Cretaceous-Paleocene platform carbonates and Lower Eocene marls and turbidites from the Jaca basin. The core zone of the fault, about 6 m thick, consists of intensely deformed clay-bearing rocks bounded by major shear surfaces. Illite and chlorite are the main hydrous minerals in the fault zone. Illite is oriented along cleavage planes while chlorite formed along shear veins (<50 μm in thickness). Authigenic chlorite provides essential information about the origin of fluids and their temperature. δ18O and δD values of newly formed chlorite support equilibration with sedimentary interstitial water, directly derived from the local hanging wall and footwall during deformation. Given the absence of large-scale fluid flow, the mineralization observed in the thrust faults records the P-T conditions of thrust activity. Temperatures of chlorite formation of about 240°C are obtained via two independent methods: chlorite compositional thermometers and oxygen isotope fractionation between cogenetic chlorite and quartz. Burial depth conditions of 7 km are determined for the Monte Perdido thrust reactivation, coupling calculated temperature and fluid inclusion isochores. The present study demonstrates that both isotopic and thermodynamic methods applied to clay minerals formed in thrust fault are useful to help constrain diagenetic and low-grade metamorphic conditions.
ISSN: 0010-7999

hal-00757736
https://hal.archives-ouvertes.fr/hal-00757736
DOI : 10.1007/s00410-011-0718-0

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The identification of the structures and deformation patterns in magma-poor continental rifted margins is essential to characterize the processes of continental lithosphere necking. Brittle faults, often termed mantle detachments, are believed to play an essential role in the rifting processes that lead to mantle exhumation. However, ductile shear zones in the deep crust and mantle are rarely identified and their mechanical role remains to be established. The western Betics (Southern Spain) provides an exceptional exposure of a strongly thinned continental lithosphere, formed in a supra-subduction setting during Oligocene-Lower Miocene. A full section of the entire crust and the upper part of the mantle is investigated. Variations in crustal thickness are used to quantify crustal stretching that may reach values larger than 2000% where the ductile crust almost disappear, defining a stage of hyper-stretching. Opposite senses of shear top-to-W and top-to-E are observed in two extensional shear zones located close to the crust-mantle boundary and along the brittle-ductile transition in the crust, respectively. At locations where the ductile crust almost disappears, concordant top-to-E-NE senses of shear are observed in both upper crust and serpentinized mantle. Late high-angle normal faults with ages of ca. 21 Ma or older (40Ar/39Ar on white mica) crosscut the previously hyper-stretched domain, involving both crust and mantle in tilted blocks. The western Betics exemplifies, probably better than any previous field example, the changes in deformation processes that accommodate the progressive necking of a continental lithosphere. Three successive steps can be identified: i/a mid-crustal shear zone and a crust-mantle shear zone, acting synchronously but with opposite senses of shear, accommodate ductile crust thinning and ascent of subcontinental mantle; ii/hyper-stretching localizes in the neck, leading to an almost disappearance of the ductile crust and bringing the upper crust in contact with the subcontinental mantle, each of them with their already acquired opposite senses of shear; and iii/high-angle normal faulting, cutting through the Moho, with related block tilting, ends the full exhumation of the mantle in the zone of localized stretching. The presence of a high strength sub-Moho mantle is responsible for the change in sense of shear with depth. Whereas mantle exhumation in the western Betics occurred in a backarc setting, this deformation pattern controlled by a high-strength layer at the top of the lithosphere mantle makes it directly comparable to most passive margins whose formation lead to mantle exhumation. This unique field analogue has therefore a strong potential for the seismic interpretation of the so-called “hyper-extended margins”.
ISSN: 0264-8172

insu-01310895
https://hal-insu.archives-ouvertes.fr/insu-01310895
https://hal-insu.archives-ouvertes.fr/insu-01310895/document
https://hal-insu.archives-ouvertes.fr/insu-01310895/file/Frasca-MarPetGeol-2016.pdf
DOI : 10.1016/j.marpetgeo.2016.04.020

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We investigate the timing of end of motion along the South Tibet Detachment System (STDS), a major normal fault system that runs parallel to the Himalayan range for more than 1500 km. Near Dinggye (similar to 28 degrees 10'N, 87 degrees 40'E), the STD dips similar to 10 +/- 5 degrees to the North and separates Paleozoic Tethyan series from Upper Himalayan Crystalline Series (UHCS). Immediately below the STD, the UHCS is highly deformed in the STD shear zone, lineations trend NNE and the shear senses are top to the NE. In micaschist, the P-T path constrained by pseudosection and garnet chemistry, shows successive metamorphic conditions of similar to 0.6 GPa and similar to 550 degrees C and 0.5 GPa and 625 degrees C. U/Pb dating of monazites and zircons in deformed and undeformed leucogranites suggests that ductile deformation lasted until at least similar to 16 Ma but ended prior to similar to 15 Ma in the STD shear zone similar to 100 m below the detachment. Ar/Ar micas ages in the footwall span between similar to 14.6 and 13.6 Ma, indicating rapid cooling down to similar to 320 degrees C, and suggesting persistence of normal faulting, at that time. The STDS is cut and offset by the N-S trending Dinggye active normal fault which initiated prior to 11 Ma thus providing a minimum bound for the end of STDS motion. These data are interpreted as reflecting 0.3 GPa (11 km) to 0.6 GPa (22 km) of exhumation along the STDS starting prior to similar to 16 Ma, ending between 13.6 and 11 Ma. The 1000 km long stretch of the STDS east of the Gurla Mandata probably stopped almost synchronously between 13 and 11 Ma ago, coevally with a sudden switch from NNE-SSW to E-W extension at the top of the accretionary prism, with a jump of the major thrust from the lower Main Central Thrust (MCTI) to the Main Boundary Thrust (MBT), and with a change in the India and Asia convergence direction. This synchronism is probably better explained in the frame of a thrust wedge or thrust system model than a lower channel flow model. West of the Gurla Mandata the STDS appears to stop 5 to 3 Ma earlier, possibly related to local interactions with the Karakorum fault in a way that needs to be understood.
ISSN: 0012-821X

hal-00475652
https://hal.archives-ouvertes.fr/hal-00475652
DOI : 10.1016/j.epsl.2009.12.035

Éditeur(s) : HAL CCSD Geological Society of London
Résumé : International audience
In Eastern China, the North China Block (NCB) has experienced a complex tectonic evolution during Late Palaeozoic to Mesozoic times. The unconformable sedimentary cover, which ranges in age from Neoproterozoic to Permian, underwent two tectonic episodes in Early Triassic and Cretaceous times. An early north–south compressional phase, D1, characterized by north-verging recumbent folds with east–west-trending axes and top-to-the-north ductile shear zones can be observed in a gabbroic pluton and the Neoproterozoic sedimentary host rocks. The available radiometric ages allow us to interpret this event as an Early Triassic back-thrusting related to the final stage of the collision between the North China and South China Blocks. During the LateMesozoic, an extensional event characterized by (1) half-grabens filled by continental terrigeneous red beds and lava flows, (2) low-angle detachment faults, (3) synkinematic granitic plutons, and (4) metamorphic core complexes is widespread in the Eastern Liaoning Peninsula. This extensional D2 event can be subdivided into a ductile deformation and a brittle deformation, corresponding to different expressions of crustal deformation. In every area studied in the Eastern Liaoning Peninsula, the ductile D2 deformation is characterized by a NW–SE-trending stretching lineation with a top-to-the-NWsense of shear.Mica and amphibole fromthe metamorphic country rocks, granodioritic or monzogranitic plutons and their mylonitized margins yield 40Ar/39Ar ages ranging from 130 to 120 Ma. These dates support fast cooling and exhumation rates coeval with the extensional tectonics. The brittle D2 deformation is responsible for the formation of high-angle normal faults marked by low-temperature cataclasites bounding half-grabens. During the Mesozoic, the tectonic regime of Eastern China experienced a significant inversion from compression to extension. The Eastern Liaoning Peninsula massif provides an example of this geodynamic transition.
ISSN: 2041-4927

hal-00134055
https://hal-insu.archives-ouvertes.fr/hal-00134055
DOI : 10.1144/SP280.7

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We analyze in this study a new set of marine data including 3D local tomography, 1992-2008 relocated earthquakes and two recent multichannel seismic lines to characterize the deformation style in the collision area offshore east Taiwan. We have mapped in detail the Mohos of the converging plates as well as the subduction interface with a resolution never reached before. We show that the sharp continental subduction of the Eurasia plate, beneath the middle part of the Central Range, indents the Philippine Sea plate (PSP) as attested by intra-oceanic slicing and incipient subduction of the PSP beneath the east coast of Taiwan. The westernmost part of the PSP slab is probably experiencing a beginning of break-off as attested by NW-trending en-échelon shear zones beneath the southern slope of the southern Ryukyu arc (SRA). These en-échelon shear zones have a sinistral component favored by the "collision-free" subduction of the PSP north of 24°30′N. The down-faulting of the subduction interface forms ramps along which earthquakes clusterize. Three M7 subduction earthquakes occurred offshore Suao city along these ramps with a recurrence interval of about 40 years: 1920 Mw7.7, 1963 Mw7.2 and 2002 Mw7.1 events. The 1966 Mw6.0-7.5 earthquakes sequence likely outlines a WNW-ESE left-lateral intra-slab shear zone. The SRA upper plate accommodates the complex geometry and deformation of the subducting PSP through seismic deformation. Shallow high velocities fringing the Luzon volcanic arc (LVA) beneath the Longitudinal Valley and north of the southernmost Ryukyu forearc basins are interpreted as relics of the LVA forearc basement squeezed in the collision zone. Based on the accommodation of a large part of the convergence through shortening within the PSP and the subsequent segmentation of the shallow subduction interface, we consider that the nucleation of a Mw ≥ 8 earthquake along the southernmost Ryukyu megathrust is unlikely.
ISSN: 0040-1951

hal-00853365
https://hal.archives-ouvertes.fr/hal-00853365
https://hal.archives-ouvertes.fr/hal-00853365/document
https://hal.archives-ouvertes.fr/hal-00853365/file/publallemandifremer.pdf
DOI : 10.1016/j.tecto.2013.03.020