Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Madeira Sn-Nb-Ta deposit corresponds to the albite-enriched facies of Madeira granite (Madeira Suite) that is part of a NE-SW alignment of three granitic bodies. Structural analyses suggest that the albite-enriched granite emplacement and development of related structures occurred in a different tectonic setting than earlier facies of the granitic bodies in the NE-SW alignment and that the structure was dominated by a N-NE-trending shortening related to a left-lateral motion along a NE-SW corridor within a Riedel shear. Three types of structures (flat-lying, near vertical fractures, and geodes/miaroles) concentrated the last magmatic-related fluid in the albite-enriched granite. U-Pb in situ zircon dating of the albite-enriched granite yielded an age of 1,822 ± 22 Ma. The other granitic plutons of the Madeira Suite, Água Boa granite (topaz-granite facies), and Europa per-alkaline granite formed at 1,825 ± 14 Ma, 1,831± 11 Ma, and 1,839 ± 10 Ma, respectively. The granite bodies of the Madeira Suite occur in an area occupied by a cauldron complex composed of volcanic sequences (Iricoumé Group) and associated A-type granites (Mapuera Suite), and their formation was controlled by the reactivation of the cauldron structures and the pre-existing structures. The gap between the cauldron complex and the Madeira Suite is no greater than 35 Ma. The geological evolution was reanalyzed from the perspective of an entire extensional environment where three successive episodes of A-type magmatism and basin formation (Urupi Formation) occurred. The data and interpretations of this work imply crucial constraints on the petrologic models proposed for the albite-enriched granite and, consequently, on the genesis of the Madeira deposit
ISSN: 0301-9268

insu-00939888
https://hal-insu.archives-ouvertes.fr/insu-00939888
https://hal-insu.archives-ouvertes.fr/insu-00939888/document
https://hal-insu.archives-ouvertes.fr/insu-00939888/file/BastosNeto-PrecambrianResearch-2014.pdf
DOI : 10.1016/j.precamres.2013.12.021

Éditeur(s) : HAL CCSD
Résumé : International audience
In the external Western Alps, the collision started with the shortening of the proximal European (Dauphinois) margin. One peculiar feature is the crustal thickening that finally led to the exhumation of the basement External Crystalline Massifs (ECM) during the Neogene. In these massifs, various age of shortening, structural style and sequence of deformation have been proposed leading to different kinematics along the Alpine arc that in turn do not imply the same crustal/lithospheric strength. In this contribution, we present new structural and microstructural data along with Ar/Ar ages from field studies in the Oisans-Grandes Rousses massifs, between Grenoble and Briançon). From balanced cross-sections, we show that about half of the external zone crustal shortening is accommodated within the ECM with similar Ar/Ar ages in all massifs. Furthermore, the shear zones present very large thicknesses (several hundred meters) and do not reactivated either the inherited Liassic normal faults or the Variscan foliation. Finally, the main shortening structures are localized beneath inherited Liassic syn-rift basins. These results suggest that the crust was weak during its shortening. Such behavior is most likely due to the combination of several factors: the crust burial (below the overthrusting internal units) down to about 10km, the presence of weak inherited syn-rift basins, and the strain softening in shear zones that evolve in mica-rich phyllonites. These results are consistent with the studies in the Aar massif and should most likely apply to the Mont Blanc massif, whose relationships with its cover are still debated.
EGU General Assembly
Vienne, Austria

insu-00839426
https://hal-insu.archives-ouvertes.fr/insu-00839426
BIBCODE : 2013EGUGA..15.8837B

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : Tectonics, v. 27, p. TC5011, 2008. http://dx.doi.org/10.1029/2007TC002232
International audience
The seismic activity of the Ligurian Basin, the northeastern termination of the western Mediterranean basin, is larger than in surrounding regions, even though recent geodetic studies attest that this area is subject to very low levels of deformation. This basin is an example of a type of passive margins that cannot be considered solely as inert sites of sedimentation and of progressive subsidence and that are reactivated in a compressive pattern; other examples include the Kwanza basin (Angola) and the Brazil margin. We investigated, by means of 2-D thermomechanical modeling, the structural and rheological heterogeneities that can lead to concentration of strain in this marginal basin. We deduced that the deformation of the basin is due to its particular geometric features, narrow and with a thick surrounding continental crust, related to its position at the southern termination of the Alps. This sharp transition, in terms of both geometry and rheological contrast, is a main factor in explaining the weakness of the margin. We discuss the importance of buoyancy forces versus tectonic forces, as well as thermal effects, on the observed reactivation. Influence of contrast in rheology between an oceanic-type crust and continental crust is also studied. Geodynamical implications are proposed for the region. The good agreement between the predicted localized deformation and the observed seismicity distribution should help improve seismic hazard assessment in the region.
ISSN: 0278-7407

hal-00407859
https://hal.archives-ouvertes.fr/hal-00407859
DOI : 10.1029/2007TC002232

Éditeur(s) : HAL CCSD Wiley-Blackwell
Résumé : International audience
New petrographic and microstructural observations, mineral equilibria modelling and U/Pb (monazite) geochronological studies were carried out to investigate the relationships between deformation and metamorphism across the Rehamna massif (Moroccan Variscan belt). In this area, typical Barrovian (muscovite to staurolite) zones developed in Cambrian to Carboniferous metasedimentary rocks that are distributed around a dome-like structure. First assemblages are characterized by the presence of locally preserved andalusite, followed by prograde evolution culminating at 6 kbar and 620 °C in the structurally deepest staurolite zone rocks. This Barrovian sequence was subsequently uplifted to supracrustal levels, heterogeneously reworked at greenschist facies conditions, which was followed locally by static growth of andalusite, indicating heating to 2.5–4 kbar and 530–570 °C. The 206Pb/238U monazite age of 298.3 ± 4.1 Ma is interpreted as minimum age of peak metamorphic conditions, whereas the ages of 275.8 ± 1.7 Ma and 277.0 ± 1.1 Ma date decompression and heating at low pressure, in agreement with previous dating of Permian granitoids intruding the Rehamna massif. The prograde metamorphism occurred during thickening and associated horizontal flow in the deeper crust (S1 horizontal schistosity). The horizontally disposed metamorphic zones were subsequently uplifted by a regional scale antiform during ongoing N–S compression. The re-heating of the massif follows late massive E–W shortening, refolding and retrograde shearing of all previous fabrics coevally with regionally important intrusions of Permian granitoids. We argue that metamorphic evolution of the Rehamna massif occurred several hundred kilometres from the convergent plate boundaries in the interior of continental Gondwanan plate. The tectonometamorphic history of the Rehamna massif is put into Palaeozoic plate tectonic perspective and Late Carboniferous reactivation of (Devonian)–Early Carboniferous basins formed during stretching of the north Gondwana margin and formation of the Palaeotethys Ocean. The inherited heat budget of these magma-rich basins plays a role in the preferential location of this intracontinental orogen. It is shown that rapid transition from lithospheric stretching to compression is characterized by specific HT type of Barrovian metamorphism, which markedly differs from similar Barrovian sequences along Palaeozoic plate boundaries reported from Variscan Europe.
ISSN: 0263-4929

hal-01468009
https://hal.archives-ouvertes.fr/hal-01468009
DOI : 10.1111/jmg.12214

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Mechanism and kinematics of the Late Mesozoic continental extension event of eastern Asia are still debated. In order to better constrain its evolution, two granodioritic plutons of the Jiaodong Peninsula have been chosen as targets for a time-constrained palaeomagnetic study. Indeed, plutons are devoid of visible deformation, did not experience rotation along horizontal axis and are precisely dated by U/Pb and 40Ar/39Ar methods. Multidomain (MD) magnetite has been identified as the principal magnetic remanent carrier. The interpolation of existing and new U/Pb and 40Ar/39Ar ages revealed that characteristic remanent magnetisation was acquired in a narrow range of 116 ± 2 Ma. Twenty out of 27 sites present stable magnetic directions calculated from high-temperature or high-coercive components. The observations of the solo normal magnetic polarity for this palaeomagnetic collection and of the magnetic remanent age consistent with the Cretaceous Normal Superchron (CNS) argue that the characteristic magnetic remanence may be considered as primary. Detailed field observations of the intrusive relationship between the plutons and country rocks and Anisotropy of Magnetic Susceptibility (AMS) study reveal the absence of the subsequent deformation of plutons, or rigid rotation of plutons along a horizontal axis. Two palaeomagnetic poles have been therefore calculated from these plutons. Among 12 out 15 Cretaceous palaeomagnetic poles, including the two new poles provided by this study, from the Jiaodong Peninsula and on both sides of Tan-Lu and Muping-Jimo faults are statistically consistent. As a result, the Jiaodong Peninsula behaved as a rigid block as internal deformation appears negligible. The remaining three derived poles are probably due to the secular variation or/and the vicinity of fault zones near of the palaeomagnetic sampling site. Thus, they can not be applied to the peninsula-scaled tectonics. Comparison of these time52 constrained Cretaceous palaeomagnetic results of the Jiaodong Peninsula with those of North China Block (NCB) indicate that the Jiaodong Peninsula was rigidly attached to NCB since, 3 at least, the Cretaceous as residual difference is clearly insignificant with respect to the error brackets. These new palaeomagnetic results confirm that the relative clockwise (CW) rotation of Eastern Liaoning-Korea Block (ELKB) with respect to NCB does not affect the Jiaodong Peninsula as a rigid block, nevertheless, some tectonic structures have been reactivated since Cenozoic and local rotations could be produced. This palaeomagnetic study reveals that the Late Mesozoic extension in Eastern Asia is heterogeneously expressed in time and space. The complete understanding of the mechanism(s) of this extensional event needs further multidisciplinary investigations.
ISSN: 0031-9201

insu-00599546
https://hal-insu.archives-ouvertes.fr/insu-00599546
https://hal-insu.archives-ouvertes.fr/insu-00599546/document
https://hal-insu.archives-ouvertes.fr/insu-00599546/file/Charles_et_al_PEPI2011.pdf
DOI : 10.1016/j.pepi.2011.05.006

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Slices of polycyclic metasediments (marbles and meta-cherts) are tectonically amalgamated with the polydeformed basement of the Dent Blanche tectonic system along a major Alpine shear zone in the Western Alps (Becca di Salé area, Valtournenche Valley). A combination of techniques (structural analysis at various scales, metamorphic petrology, geochronology and trace element geochemistry) was applied to determine the age and composition of accessory phases (titanite, allanite and zircon) and their relation to major minerals. The results are used to reconstruct the polyphase structural and metamorphic histories, comprising both pre-Alpine and Alpine cycles. The pre-Alpine evolution is associated with low-pressure high-temperature metamorphism related to Permo-Triassic lithospheric thinning. In meta-cherts, microtextural relations indicate coeval growth of allanite and garnet during this stage, at ~ 300 Ma. Textures of zircon also indicate crystallisation at HT conditions; ages scatter from 263 to 294 Ma, with a major cluster of data at ~ 276 Ma. In impure marble, U-Pb analyses of titanite domains (with variable Al and F contents) yield apparent 206Pb/238U dates range from Permian to Jurassic. Chemical and isotopic data suggest that titanite formed at Permian times and was then affected by (extension-related?) fluid circulation during the Triassic and Jurassic, which redistributed major elements (Al and F) and partially opened the U-Pb system. The Alpine cycle lead to early blueschist facies assemblages, which were partly overprinted under greenschist facies conditions. The strong Alpine compressional overprint disrupted the pre-Alpine structural imprint and/or reactivated earlier structures. The pre-Alpine metamorphic record, preserved in these slices of metasediments, reflects the onset of the Permo-Triassic lithospheric extension to Jurassic rifting.
ISSN: 0024-4937

hal-00758123
https://hal.archives-ouvertes.fr/hal-00758123
DOI : 10.1016/j.lithos.2012.05.007

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
The current structure of the South Armorican Domain in the French Variscan Belt, provides an excellent record of the late orogenic evolution, as documented by the complex interactions between extensional structures and partial melting. In the Golfe du Morbihan, the South Brittany Migmatite Belt (SBMB), tectonically overlain by non-melted metamorphic units, was studied by combined structural and 40Ar/39Ar methods. The recognition of successive deformation stages points to a strain continuum initiated at depth at the end of a partial melting event, and continued to near-surface brittle faulting, encompassing ductile strain localization over a major top-to-the-ESE extensional shear zone (SSZ) consistent with an overall WNW-ESE orogen-parallel stretching. This multidisciplinary study making the link between structure, texture, microchemistry and 40Ar/39Ar geochronology allow distinguishing between cooling, recrystallization and syn-tectonic crystallization ages. The first extensional insights, witnessed by dyke intrusion were dated at ~319 ± 6 Ma immediately after the SBMB partial melting. Strain localization along the SSZ, occurred until ~302-298 Ma when SBMB crossed the ductile-brittle transition. Moreover, in situ 40Ar/39Ar analysis, of syn-tectonic white micas sampled in the ductile and brittle structures yield similar ~300 Ma. Formation or reactivation of the SSZ may have occurred during the rapid cooling of the SBMB settled at ~305 Ma by conventional 40Ar/39Ar analysis. Large-scale late orogenic extensional event of the previously overthickened Variscan crust thus lasted over ~20 ± 3 Myr in the same extensional tectonic regime guided by the South Armorican Shear Zone.
ISSN: 0278-7407

insu-00628699
https://hal-insu.archives-ouvertes.fr/insu-00628699
https://hal-insu.archives-ouvertes.fr/insu-00628699/document
https://hal-insu.archives-ouvertes.fr/insu-00628699/file/2010TC002788.pdf
DOI : 10.1029/2010TC002788

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
Selected high-resolution seismic-reflection profiles and multibeam bathymetry acquired along the convergent Ecuador margin during the ATACAMES cruise on onboard the R/V L’Atalante (Jan.15–Feb.18, 2012) allow a preliminary evaluation of the neotectonic development and stratigraphic evolution of the margin based on the sismo-stratigraphic analysis of Quaternary sediment preserved on the margin shelf and upper slope. We present three major preliminary results. (1) The evolution of the Esmeraldas, Guayaquil and Santa Elena canyons. The head of the Esmeraldas canyon is the location of a continuous significant sediment transport. The Guayaquil canyon shows several episodes of deposition and incision. Aggrading sedimentation pattern in the canyon records several changes in relative sea-level. The subsidence of the Gulf of Guayaquil probably contributes to the good preservation of the canyon filling stages. The Santa Elena canyon is controlled by a SW–NE trending normal fault. (2) Variations of sediment accumulation and relative vertical motions are shown along-strike the shelf edge. Offshore the uplifted Manta peninsula, a pronounced subsidence of the shelf edge is documented by sedimentary clinoforms that have deposited in a morphological reentrant, and have migrated upslope testifying of a local subsidence meanwhile the adjacent La Plata Island area underwent uplift. In the Esmeraldas canyon area, a local uplift of the shelf is documented. (3) Two neotectonic fault systems with a possible transcurrent component are imaged across the shelf edge and upper margin slope offshore Jama, and Cape Galera. This possible transcurrent motion could be related to the reactivation of ancient faults of the upper plate by the subduction. These preliminary results indicate that the ATACAMES data set has a strong potential to evaluate the spatial and temporal contribution of tectonic and climate changes on the structural development and stratigraphic evolution of the Ecuador continental margin.
ISSN: 0025-3235

insu-01131151
https://hal-insu.archives-ouvertes.fr/insu-01131151
DOI : 10.1007/s11001-014-9231-y

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Properly assessing the extent and magnitude of fault ruptures associated with large earthquakes is critical for understanding fault behavior and associated hazard. Submarine faults can trigger tsunamis, whose characteristics are defined by the geometry of seafloor displacement, studied primarily through indirect observations (e.g., seismic event parameters, seismic profiles, shipboard bathymetry, coring) rather than direct ones. Using deep-sea vehicles, we identify for the first time a marker of coseismic slip on a submarine fault plane along the Roseau Fault (Lesser Antilles), and measure its vertical displacement of ∼0.9 m in situ. We also map recent fissuring and faulting of sediments on the hangingwall, along ∼3 km of rupture in close proximity to the fault's base, and document the reactivation of erosion and sedimentation within and downslope of the scarp. These deformation structures were caused by the 2004 M w 6.3 Les Saintes earthquake, which triggered a subsequent tsunami. Their characterization informs estimates of earthquake recurrence on this fault and provides new constraints on the geometry of fault rupture, which is both shorter and displays locally larger coseismic displacements than available model predictions that lack field constraints. This methodology of detailed field observations coupled with near-bottom geophysical surveying can be readily applied to numerous submarine fault systems, and should prove useful in evaluating seismic and tsunamigenic hazard in all geodynamic contexts.
ISSN: 0012-821X

insu-01557932
https://hal-insu.archives-ouvertes.fr/insu-01557932
https://hal-insu.archives-ouvertes.fr/insu-01557932/document
https://hal-insu.archives-ouvertes.fr/insu-01557932/file/EPSL-2006-escartin.pdf
DOI : 10.1016/j.epsl.2016.06.024

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Mediterranean geodynamic system is an exceptional natural laboratory to study the complexities of back-arc extension during subduction rollback. Corsica is a key locality that recorded the Alpine subduction-collision history followed by 30 Ma of the Apennines slab rollback, responsible for the successive opening, from West to East, of the Liguro-Provençal basin and the Tyrrhenian Sea. The overall strain pattern of the Alpine metamorphic units of Alpine Corsica is studied through a synthesis of i) available geological maps, ii) geochronological data and iii) newly acquired structural data relative to successive events of ductile and brittle extension, Three main stages of extension are recorded: 1/ Syn-metamorphic Oligocene extension accommodated by N140° trending ductile shear zones, that correspond to the reactivation of a major Alpine thrust; 2/ Burdigalian ramp-flat extension with N60°-70° trending fault zones that controlled the deposition of onshore piggy-back basins (e.g. St Florent basin), and 3/ Serravalian N-S trending fault zones. From a geodynamical point of view, these successive extensional deformations in Alpine Corsica can be correlated to the history of the Apennines slab rollback. The two first stages are related to a southeastward rollback of the Appennines slab that successively triggered: 1/ Continental rifting in Oligocene leading to the opening of the Liguro-Provençal basin and 2/ Burdigalian extension with N60°-70° trending fault zone, oblique to the Alpine thrust that, after a counterclockwise rotation of the Corso-Sardinian block, became unable to accommodate extension. Finally, the third stage that gave NS-trending fault zones developed in Serravalian, at the onset of Tyrrhenian rifting, related to an eastward rollback of the Apennines slab, as a response of slab tearing in Sicily.
ISSN: 0040-1951

insu-01424859
https://hal-insu.archives-ouvertes.fr/insu-01424859
https://hal-insu.archives-ouvertes.fr/insu-01424859/document
https://hal-insu.archives-ouvertes.fr/insu-01424859/file/gueydan-tectonoph-2017.pdf
DOI : 10.1016/j.tecto.2016.12.028

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Fault affecting silicoclastic sediments are commonly enriched in clay minerals. Clays are sensitive to fluid–rock interactions and deformation mechanisms; in this paper, they are used as proxy for fault activity and behavior. The present study focuses on clay mineral assemblages from the Point Vert normal fault zone located in the Annot sandstones, a Priabonian-Rupelian turbidite succession of the Alpine foredeep in SE France. In this area, the Annot sandstones were buried around 6–8 km below the front of Alpine nappes soon after their deposition and exhumed during the middle-late Miocene. The fault affects arkosic sandstone beds alternating with pelitic layers, and displays throw of about thirty meters. The fault core zone comprises intensely foliated sandstones bounding a corridor of gouge about 20 cm thick. The foliated sandstones display clay concentration along S–C structures characterized by dissolution of K-feldspar and their replacement by mica, associated with quartz pressure solution, intense microfracturation and quartz vein precipitation. The gouge is formed by a clayey matrix containing fragments of foliated sandstones and pelites. However, a detailed petrographical investigation suggests complex polyphase deformation processes. Optical and SEM observations show that the clay minerals fraction of all studied rocks (pelites and sandstones from the damage and core zones of the fault) is dominated by white micas and chlorite. These minerals have two different origins: detrital and newly-formed. Detrital micas are identified by their larger shape and their chemical composition with a lower Fe–Mg content than the newly-formed white micas. In the foliated sandstones, newly-formed white micas are concentrated along S–C structures or replace K-feldspar. Both types of newly formed micas display the same chemical composition confirmed microstructural observations suggesting that they formed in the same conditions. They have the following structural formulas: Na0.05 K0.86 (Al 1.77 Fe0.08 Mg0.15) (Si3.22 Al0.78) O10 (OH)2. They are enriched in Fe and Mg compared to the detrital micas. Newly-formed chlorites are associated with micas along the shear planes. According to microprobe analyses, they present the following structural formula: (Al1,48 Fe2,50 Mg1,84) (Si2,82 Al1,18) O10 (OH)8. All these data suggest that these clay minerals are synkinematic and registered the fault activity. In the gouge samples, illite and chlorite are the major clay minerals; smectite is locally present in some samples.In the foliated sandstones, Kubler Index (KI) ((001) XRD peak width at half height) data and thermodynamic calculations from synkinematic chlorite chemistry suggest that the main fault deformation occurred under temperatures around 220 °C (diagenesis to anchizone boundary). KI measured on pelites and sandstones from the hanging and footwall, display similar values coherent with the maximal burial temperature of the Annot sandstones in this area. The gouge samples have a higher KI index, which could be explained by a reactivation of the fault at lower temperatures during the exhumation of the Annot sandstones formation
ISSN: 0191-8141

hal-01172423
https://hal.archives-ouvertes.fr/hal-01172423
DOI : 10.1016/j.jsg.2015.03.012

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
In the Gulf of Cadiz key segment of the Africa-Iberia plate boundary (North-East Atlantic ocean), three main different modes of tectonic interference between a recently identified wrench system (SWIM) and the Gulf of Cadiz Accretionary Wedge (GCAW) were tested through analog sand-box modeling: a) An active accretionary wedge on top of a pre-existent inactive basement fault; b) An active strike-slip fault cutting a previously formed, inactive, accretionary wedge; and c) Simultaneous activity of both the accretionary wedge and the strike-slip fault. The results we obtained and the comparison with the natural deformation pattern favor a tectonic evolution comprising two main steps: i) the formation of the Gulf of Cadiz Accretionary Wedge on top of inactive, Tethyan-related, basement faults (Middle Miocene to ~ 1.8 Ma); ii) subsequent reactivation of these basement faults with dextral strike-slip motion (~ 1.8 Ma to present) simultaneously with continued tectonic accretion in the GCAW. These results exclude the possibility of ongoing active SWIM wrench system cross-cutting an inactive GCAW structure. Our results also support a new interpretation of the SWIM wrench system as fundamentally resulting from strike-slip reactivation of an old (Tethyan-related) plate boundary.
ISSN: 0025-3227

insu-00643630
https://hal-insu.archives-ouvertes.fr/insu-00643630
https://hal-insu.archives-ouvertes.fr/insu-00643630/document
https://hal-insu.archives-ouvertes.fr/insu-00643630/file/Duarte_etal_2011_MS-1.pdf
DOI : 10.1016/j.margeo.2011.09.014

Éditeur(s) : HAL CCSD
Résumé : International audience
The Aegean domain is a key area for understanding the processes of back-arc extension. Observed deformation pattern and present day kinematics result from the interaction between the southward retreat of the Hellenic trench and the westward escape of Anatolia. Using laboratory experiments designed to study lithosphere-scale deformation, we show that the overall pattern of Aegean extension requires not only the combination of trench retreat and Anatolia escape since 15 Ma but also the presence of an inherited lithosphere-scale mechanical discontinuity: the Vardar Suture Zone (VSZ). The reactivation in dextral shear of the eastern branch of the VSZ accommodates both the trench retreat (NS stretching) and the westward escape of Anatolia (EW shortening) in the Cyclades area since 15 Ma. Additionally, our model shows that the North Anatolian Fault (NAF) is a late structure in the evolution of the Aegean, initiated 10 Ma after the onset of Anatolia escape. The model displays displacement sub-domains, which result from strain partitioning instead of being “rigid microplates”, directly comparable to the present-day displacement field (GPS) of the Aegean and western Anatolia. Our modelling provides a simple way to look at the dynamics of Aegean extension in two main stages. From middle Eocene to middle Miocene, extension was only driven by the southward retreat of the Hellenic trench at a rate lower than 1 cm.y-1. Since middle Miocene, the combination of slab rollback with Anatolia westward escape, resulted in a southwest direction of trench retreat, with an accelerating rate of up to 3 cm.y-1.
AGU Fall Meeting 2015
San Francisco, United States

insu-01242045
https://hal-insu.archives-ouvertes.fr/insu-01242045

Éditeur(s) : HAL CCSD
Résumé : International audience
The Achmmach tin mineralization (NE of theMoroccan Central Massif) is associated with tourmaline-richalteration halos, veins, and faults hosted in sandstones andmetapelites of the Upper Visean-Namurian. These depositsare reported to be late Hercynian in age and related to theemplacement of late-orogenic granite not outcropping in thestudied area. Structural and paragenetic studies of theAchmmach tin deposit were conducted in order to establisha general model of the mineralization. From field constraints,the late Hercynian phase is marked by a transition fromtranspression to extension with deformation conditions evolvingfrom ductile to brittle environments. The transpression(horizontal shortening direction roughly trending E-W) is coevalwith the emplacement of the first tourmaline halos alongseveral conjugated trends (N070, N020, and N120).Thereafter, a tourmaline-rich breccia formed in response tothe fracturing of early tourmaline-altered rocks.Subsequently, during the extensional phase, these structureswere reactivated as normal faults and breccias, allowing theformation of the main tin mineralization (cassiterite) associatedwith a wide variety of sulfides (arsenopyrite, chalcopyrite,sphalerite, galena, pyrrhotite, bismuthinite, pyrite, and stannite). This evolution ends with fluorite and carbonate deposition.The hydrothermal fluid flow velocity, calculated byapplying statistical measures on the tourmaline growth bands,varies with the lithology. Values are lower in metapelites andhigher in breccia. In the general evolution model proposedhere, tourmaline alteration makes the rock more competent,allowing for brittle fracturing and generation of open spacewhere the main Sn mineralization was precipitated.
Mineralium Deposita

insu-01240481
https://hal-insu.archives-ouvertes.fr/insu-01240481
DOI : 10.1007/s00126-015-0613-0