Éditeur(s) : HAL CCSD Cambridge University Press (CUP)
Résumé : International audience
The Amalaoulaou Neoproterozoic island-arc massif belongs to the Gourma belt in Mali. The metagabbros and pyroxenites forming the main body of this arc root show the pervasive development of garnet. In the pyroxenites, the latter has grown by reaction between pyroxene and spinel during isobaric cooling. By contrast, in the metagabbros, garnet textures and relations to felsic veins exclude an origin through solid-state reactions only. It is proposed that garnet has grown following dehydration and localized melting of amphibole-bearing gabbros at the base of the arc. The plagioclase-saturated melts represented by anorthositic veins in the metagabbros and by trondhjemites in the upper part of the massif provide evidence for melting in the deep arc crust, which locally generated high-density garnet clinopyroxene rutile residues. Garnet growth and melting began around 850 degrees C at 10 kbar and the tonalitic melts were most probably generated around 1050 degrees C at P >= 10 kbar. This HT granulitic imprint can be related to arc maturation, leading to a P-T increase in the deep arc root and dehydration and/or dehydration-melting of amphibole-bearing gabbros. Observation of such features in the root of this Neoproterozoic island arc has important consequences, as it provides a link to models concerning the early generation of continental crust.
ISSN: 0016-7568

hal-00420960
https://hal.archives-ouvertes.fr/hal-00420960
DOI : 10.1017/S0016756808005499

Éditeur(s) : HAL CCSD Springer Verlag/EDP Sciences
Résumé : International audience
The vibration damping coefficient (tanδ) of wood is an important property for acoustical uses, including musical instruments. Current difficulties in the availability of some of the preferred species call for diversification, but this comes up against the lack of systematic damping coefficient data. * Keeping in mind the possible factors affecting tanδ, could we predict its variations between species, by using indicators that are either easily measured and/or readily available for many species? * Vibrational properties, equilibrium moisture content and colorimetric parameters were assessed on 94 wood types belonging to 76 species. Experimental results were then related to data on chemical contents and physical properties from the CIRAD database. The "standard" relationship between tanδ and specific modulus of elasticity (E'/ρ) explained only half of the variations. Deviations from this trend were correlated to extractives content, yet effects were not directly quantitative. Damping deviations were also correlated to colour and moisture-related properties, especially so with fibre saturation point. * By taking into account a combination of moisture-related properties, colour - or extractives content, and the "standard" relationship between tanδ and E'/ρ, we could propose simple predictive models which explain up to 89% of observed variations in tanδ between 48 species.
ISSN: 1286-4560

hal-00808338
https://hal.archives-ouvertes.fr/hal-00808338
https://hal.archives-ouvertes.fr/hal-00808338/document
https://hal.archives-ouvertes.fr/hal-00808338/file/Physico-chemical_indicators_Bremaud_al.pdf
DOI : 10.1051/forest/2010032

Éditeur(s) : HAL CCSD Wiley
Résumé : Seasonal variations in environmental conditions influence the functioning of the whole ecosystem of tropical rain forests, but as yet little is known about how such variations directly influence the leaf gas exchange and transpiration of individual canopy tree species. We examined the influence of seasonal variations in relative extractable water in the upper soil layers on predawn leaf water potential, saturated net photosynthesis, leaf dark respiration, stomatal conductance, and tree transpiration of 13 tropical rain forest canopy trees (eight species) over 2yr in French Guiana. The canopies were accessed by climbing ropes attached to the trees and to a tower. Our results indicate that a small proportion of the studied trees were unaffected by soil water depletion during seasonal dry periods, probably thanks to efficient deep root systems. The trees showing decreased tree water status (i.e., predawn leaf water potential) displayed a wide range of leaf gas exchange responses. Some trees strongly regulated photosynthesis and transpiration when relative extractable water decreased drastically. In contrast, other trees showed little variation, thus indicating good adaptation to soil drought conditions. These results have important applications to modeling approaches: indeed, precise evaluation and grouping of these response patterns are required before any tree-based functional models can efficiently describe the response of tropical rain forest ecosystems to future changes in environmental conditions.
ISSN: 0006-3606

hal-01032411
https://hal.archives-ouvertes.fr/hal-01032411
DOI : 10.1111/j.1744-7429.2012.00902.x

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
In this paper, we have presented a spectral and a multifractal analysis performed on 412 time series of wind speed data each of duration of 350 s and sampled at 20 Hz. The average spectrum for the wind speed displays a scaling behavior, in the inertial range, over two decades, with b ¼ 1:68 close to the Kolmogorov value À 5/3. A multifractal analysis has been motivated by the presence of scaling invariance in data set. Then we have considered their scaling properties in the framework of fully developed turbulence and multifractal cascades. The results obtained for wind speed confirm that the exponent scaling function z V ðqÞ is nonlinear and concave. This exponent characterizes the scaling functions in the inertial range indicating that the wind speed is intermittent and multifractal. Moreover the theoretical quadratic relation for lognormal multifractals is well fitted. We investigate the consequence for wind energy production: we generate stochastic simulations of a multifractal random walk, and using a power curve derived from experimental data, we generate the associated power time series. We show that, due to the saturation of the power curve for large speed values, when the input time series (turbulent wind speed) is multifractal, the output can be almost monofractal.
ISSN: 0167-6105

hal-01527886
https://hal.archives-ouvertes.fr/hal-01527886
DOI : 10.1016/j.jweia.2012.06.002

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
In this study we attempt to understand the water storage variations in a karst aquifer on the Larzac Plateau (South of France) using ground-based gravimetry. Surface to 60 m depth gravity measurements are performed three times a year since 2006 down a pothole, in complement to monthly absolute gravity (AG) measurements at three sites. The time variations of the surface to depth (STD) gravity differences are compared with the AG variations. Using a simple Bouguer plate model, we find that the STD gravity differences are very similar to the AG variations. The STD gravity differences are then used to determine apparent density values. These integrative density values are compared with measured grain densities from core samples to obtain an apparent porosity and saturation change representative of the investigated depth. The apparent porosity ranges from 4.8 to 7.3 per cent. We then discuss on the repartition of the apparent physical properties with respect to the epikarst and infiltration zone karst structures. We argue that AG and STD differences monitor epikarst water storage variations. Within this scope, we discuss the fact that seasonal scale water storage variation occurs predominantly in the epikarst.
ISSN: 0956-540X

hal-00413528
https://hal.archives-ouvertes.fr/hal-00413528
DOI : 10.1111/j.1365-246X.2009.04118.x

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : Solidus phase relations of carbon dioxide-saturated (CO2 vapor) model peridotite in the system CaO-MgO-Al2O3-SiO2-CO2 in the 1.1-2.1 GPa pressure range are reported. The solidus has a positive slope in pressure-temperature (PT) space from 1.1 to 2 GPa. Between 2 and 2.1 GPa, the melting curve changes to a negative slope. From 1.1 to 1.9 GPa, the liquid, best described as CO2-bearing silicate liquid, is in equilibrium with forsterite, orthopyroxene, clinopyroxene, spinel, and vapor. At 2 GPa, the same crystalline phase assemblage plus vapor is in equilibrium with two liquids, which are silicate and carbonatitic in composition, making the solidus at 2 GPa PT invariant. The presence of two liquids is interpreted as being due to liquid immiscibility. Melting reactions written over 1.1-1.9 GPa are peritectic, with forsterite being produced upon melting, and the liquid is silicate in composition. Upon melting at 2.1 GPa, orthopyroxene is produced, and the liquid is carbonatitic in composition. Hence, the invariance between 1.9 and 2.1 GPa is not only the reason for the dramatic change in the liquid composition over an interval of 0.2 GPa, but the carbonated peridotite solidus ledge itself most likely appears because of this PT invariance. It is suggested that because carbonatitic liquid is produced at the highest solidus temperature at 2 GPa in PT space in the system studied, such liquids, in principle, can erupt through liquid immiscibility, as near-primary magmas from depths of approximately 60 km.
ISSN: 0148-0227

hal-00939406
https://hal.archives-ouvertes.fr/hal-00939406
DOI : 10.1002/jgrb.50249

Éditeur(s) : HAL CCSD Elsevier
Résumé : Carbon emission at volcanic centers requires a constant balance between output (mostly by volcanism, either at plate boundaries or intraplate) and input (mostly at trench settings) of carbon from and to the Earth's mantle. The form of carbon that resides in the mantle is controlled by depth (pressure) and oxygen fugacity, the latter in turn depending on the depth and the concentration of iron in the mantle. In the shallow, lithospheric mantle, carbon is likely to be present in the oxidized form of CO2 (except under cratons where carbon is reduced to graphite or diamond). Below approximately 90 km, in the asthenosphere, the oxidized form of carbon is carbonate, either mineral or melt, depending on the thermal regime. At depths greater than approximately 150 km, the asthenospheric mantle is too reducing for carbon to stay in its oxidized form and only diamond is present, unless there is sufficient hydrogen to form reduced C–H fluids. Hence, the region located in the depth range of 90 to 150 km deep is where carbonatitic melts can most likely be produced and impregnate the surrounding mantle through metasomatism. The upper bound of this region is called the carbonate ledge. This limit prevents carbonate (either solid or molten) from ascending because of degassing and CO2 liberation. The lower bound is a redox front where redox melting (that is, melting caused by oxidation) may take place in an ascending portion of carbon-containing mantle. Carbonatite eruptions and presence of carbonate mineral inclusions in deep-seated diamonds provide evidence that these boundaries can be trespassed in some cases.An analysis of the experimental data that has bearing on silicate melting in the presence of carbon further shows that the carbonate ledge is a melting curve with a negative or flat Clapeyron (dP/dT) slope. In the carbonated ultrabasic (peridotite) systems, the carbonate ledge is located between ~ 2–3 GPa. The ledge divides the pressure–temperature space into a region of low-pressure silicate melt production, and a high-pressure region where carbonatites can be produced. Carbonatitic melts in equilibrium with mantle peridotite have compositions close to dolomitic (approximately equal amounts of Ca and Mg) with a general trend of becoming markedly more magnesian with increasing pressure. Calcic carbonatites may be stable at pressures < 2 GPa if clinopyroxene is absent. At mantle transition zone pressure range, there seems to be a melting temperature decrease (negative fusion slope), which may be caused by the stabilization of majoritic garnet.The carbonated basic (broadly eclogitic) system is more complex than the peridotitic one, because of the strong control of bulk silicate composition on melting temperatures, and hence, on melt composition. In carbonated eclogite systems, we propose that the effect of bulk composition upon all observed features can perhaps be related to silica super-saturation, or lack thereof. In some cases, high calcium (> 80 mol% CaCO3) melts can be produced, making the melting of carbonated eclogites an appealing scenario for the genesis of calcio-carbonatites in the Earth's mantle. Comparison with modeled pressure–temperature paths of subducted oceanic lithosphere shows that fusion of carbonated eclogite at depths shallower than 200 km should be expected for hot (Cascadian-type) subduction thermal regimes. On the other hand, in the case of cooler thermal regimes (Honshu-type, for instance), subducted carbonates may be stable to greater depths in Earth at trench settings, depending on the bulk composition of the system.Furthermore, high-pressure experiments show evidence of a continuum among carbonatitic, kimberlitic, melilititic, and basaltic liquids, for increasing melting degree of carbonated peridotite. This continuum has not been documented in the case of fusion of carbonated eclogite. It may be present, however, when certain sediments are fused, although the silicate melts are granitic to rhyodacitic instead of being kimberlitic in composition. Additional high-pressure work on phase relations in the simple binary system CaCO3–MgCO3 and specific focus on oxide solubility in the vapor phase have the potential to further clarify phase relations on complex silicate–carbonate systems at mantle conditions.
ISSN: 0009-2541

hal-01277770
https://hal.archives-ouvertes.fr/hal-01277770
DOI : 10.1016/j.chemgeo.2015.05.018