Éditeur(s) : HAL CCSD
Résumé : In Taiwan , the subduction of the Chinese continental margin under the Luzon arc results in the progressive growth of an active orogenic wedge. It is one of the best places to study the complex relationships that occurs between the tectonic processes controlling deformation (plate rheology and kinematics, metamorphism and magmatism) and surface processes (erosion and sedimentation). In order to study the kinematics of the present day convergence of Philippine Sea plate to the Asian continent around Taiwan, we perform 2D and 3D sandbox modeling and we analyzed the models with PIV (Particle Image Velocimetry) software. In 2D experiments, a model Coulomb wedge is submitted to erosion and sedimentation under topography and flux steady state conditions. The 3D experiments are mainly used to study the escape tectonics occurring in the middle west and southwest Taiwan. A wedge shaped indenter and a basement relief were used to simulate the mechanical plate boundary between Philippine Sea plate and Eurasia plate and the basement topography to the west of Taiwan respectively. We examine the exhumation patterns, the mode of fault propagation and displacement patterns by strain partitioning of vertical vs. horizontal displacement and convergent parallel vs. orogen parallel components. The preliminary conclusions are: 1. The interactions between tectonics, erosion and sedimentation control geometry and kinematics of the doubly vergent transpressional orogen. 2. Exhumation processes are controlled by the balance between erosion, frontal accretion and underplating in different structural domains of the wedge. 3. Retrowedge erosion favorites backfolding and backthrusting, induces flower structures and fan shaped cleavage distribution. 4. Sedimentation promotes underplating and out-of sequences thrusting. 5. Continental subduction or subduction of topographic highs will enhance underthrusting/underplating, thick-skin tectonics and inversion of sedimentary basin.
Bolletino di Geofisica teorica ed applicata

hal-00411133
https://hal.archives-ouvertes.fr/hal-00411133

Éditeur(s) : HAL CCSD
Résumé : International audience
The purpose of our study is to model a geothermal reservoir. When geothermal reservoir are assumed to be composed of pure water, the transfer of mass and energy is classically described by two balance equations: mass balance equation and the energy balance equation. In addition to those equations, fluid velocity ist classically given by the Darcy law while thermodynamic properties, inferred from theoretical or empirical equations of state, are used to close the mathematical system. Once this system is closed, there exist different solutions. The first one is to solve for pressure and temperature with a variable switch to saturation in the two-phase region (e.g. TOUGH2). The second one is to solve for pressure and enthalpy to increase stability of phase transition between single and two-phase states (e.g. Hydrotherm). We adopted the second option and chose te use a splitting method to get rid of the complexity of coupling equations and a finite volume method for the spatial discretization. Selecting object-oriented languages, we developed a multi-language framework, combining Python, Fortran and a C++ implementation of IAPWS (from the freesteam project) including the supercritical equations, in porous media velocity is given by Darcy law and to close the system physical properties are determined by the IAPWS-IF97 thermodynamic formulation. We resolve the equations in pressure and enthalpy instead of pressure and temperature in order to increase stability and to handle easier the passage from a single-phase to a two-phase system. We solve the system by using a splitting method - to get rid of the complexity of coupling equations - and a finite volume method. We offer some freedom to users thanks to the implementation of several methods like explicit or implicit Euler, Runge-Kutta or BDF2 for time solvers or GMRES and BICGSTAB for the linear solver. We can handle several boundary conditions like no-flow - describing a boundary which can not exchange matter with the exterior - or like a mixed-therm condition - a Dirichlet condition to the pressure and a Dirichlet or an outflow condition to the temperature in order to describe a recharge or a discharge zone - ... We're developing a multi-language framework, combining Python, Fortran and the C++ implementation of IAPWS (from the freesteam project). All these languages are object-oriented. We've applied this simulation model to the dogger in Paris, France, to several one-dimensional systems and a two-dimensional one made by Coumou with the CSMP++ platform. The dogger is a reservoir exploited to produce heat by pumping water at 70 and reinjecting it in the reservoir at 40. In the one-dimensional systems we wanted to observe the process of heat transfer from a higher temperature boundary to a smaller one in a high-energy domain. The last simulation shows the natural convection of water in a fault. For every simulation we compared the solutions we found with an other code (TOUGH2 or CSMP++) and they agreed. The next step will be to model the geothermal plant in Guadeloupe, West Indies. It's the only place in France - and in the West Indies so far - producing electricity with the earth power. The temperature can reach up to 1000 and the pressure range is around a few hundreds MPa. In some surface zones we can see two-phase water at atmospheric pressure. In the 1980s Bouillante was a laboratory for France. Since 1995 Bouillante has given 30GWh electricity a year to the Guadeloupeans.
PROCEEDINGS, Thirty-Ninth Workshop on Geothermal Reservoir Engineering
Stanford, United States

Droits : info:eu-repo/semantics/OpenAccess
hal-00944133
https://hal-brgm.archives-ouvertes.fr/hal-00944133
https://hal-brgm.archives-ouvertes.fr/hal-00944133/document
https://hal-brgm.archives-ouvertes.fr/hal-00944133/file/Copol.pdf

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Thermal diffusivity of synthetic quartz single-crystals and natural polycrystalline aggregates were measured using a modified Angstrom method at ambient pressure and up to 800 degrees C in order to investigate the effect of crystal preferred orientation on thermal diffusivity of quartz rich rocks. The thermal diffusivity tensor of quartz was determined by measuring the thermal diffusivity of an oriented synthetic quartz single-crystal along the [100] and [001] directions. A naturally deformed, fine-grained quartzite mylonite, was used to compare the single crystal properties with aggregate properties. Using the crystal preferred orientations (CPO) measured by the Electron Back Scattered Diffraction (EBSD) method and the measured thermal diffusivity tensor of quartz, the three-dimensional aggregate thermal diffusivity was modelled using volume averaging models. In order to test the validity of these models that are only based on the properties of the constituent minerals, the thermal diffusivity was then measured on oriented cores as a function of temperature, along three orthogonal directions, parallel to the (X-lineation, Y, Z-pole to foliation) structural frame. Both modelled and direct measurement of thermal diffusivity show an anisotropy of thermal diffusivity, heat transport being more effective parallel to Y-direction and less effective parallel to the lineation X-direction. Thermal diffusivities measured in a given direction on the natural rock are lower by less than 10% than the modelled thermal diffusivity in the same direction, showing that rock imperfections have a weak effect on heat transport. In addition, the modelled thermal diffusivity anisotropy based on the characterization of crystal orientations and thermal diffusivity tensor shows a good agreement with measurements in both alpha and beta stability field. This validation of the petrophysical simulation allows for evaluating the 3D thermal diffusivity of quartz rich rocks in different crustal conditions. The 3D thermal diffusivity of five naturally deformed quartzites displaying quartz fabrics expected in different crustal pressure and temperature ranges were simulated. The resulting thermal diffusivity anisotropies of quartzites range between 40% and 10%, depending on temperature, crystallographic fabric patterns and fabric strength. Under crustal conditions, quartzites deformed in the granulite facies display a high thermal diffusivity in the (XZ) foliation plane, whereas quartzites deformed in greenschist facies have highest thermal diffusivity in the (Z) direction normal to the foliation plane.
ISSN: 0040-1951

hal-00413568
https://hal.archives-ouvertes.fr/hal-00413568
DOI : 10.1016/j.tecto.2008.11.006

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Experimentally Assisted Molecular Modelling (EAMM) is an original approach for predicting the structure of organic micro-crystals and deducing their habit in the presence of various solvents and additives. It is applied here in the case of n-octylamino-nitrobenzoxadiazole (nOA-NBD), a fluorescent compound. This general approach is first of all described and validated by its blind application to three known and closely-related crystals. Then, the whole process is applied to predict the molecular crystal generated by n-octylamino-NBD, including the molecule conformation, its structure (cell parameters, molecular packing, X-ray powder diagrams) and its theoretical plus actual habits in the presence of a solvent (p-xylene) and two additives (acetic acid and n-dodecane). The conformation of the predicted molecule is validated by comparison with two similar molecules embedded in observable crystals. Then, the choice between two proposed structures (with the same energy and two equiprobable packings) is based on the comparison between experimental and re-computed X-ray powder diffraction diagrams, and also on the interpretation of an actual TEM image in the light of the proposed cell parameters. This choice is confirmed by the comparison between the vapour-grown face development (proposed by the BFDH or the attachment energy models) and the actual face development in a pure solvent. Finally, the actual habit deduced from comparing the crystal attachment energy with the adsorption energy of solvent or additive molecules is validated by SEM images of NBD micro-crystals in presence of the solvent alone or in presence of both additives. In conclusion, the EAMM approach appears to be a decisive tool for quickly simulating structural and habit properties of the molecular crystals, accessible or not by experimentation. Thus, a numerical selection of molecules becomes possible in view of deriving organic materials with predetermined properties, such as the fluorescence properties of the compound considered in the present study.
ISSN: 0022-0248

hal-00857894
https://hal.archives-ouvertes.fr/hal-00857894
DOI : 10.1016/j.jcrysgro.2011.07.035

Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
The association of experimental data showing that the plastic deformation of olivine, the main constituent of the upper mantle, is highly anisotropic and the ubiquitous seismic anisotropy in the upper mantle, which indicates that olivine crystals show coherent orientations over scales of tens to hundreds of kilometers, implies that the long-term deformation in the upper mantle is anisotropic. We propose a multiscale approach, based on a combination of finite element and homogenization techniques, to model the deformation of a lithospheric plate while fully considering the mechanical anisotropy stemming from a strain-induced orientation of olivine crystals in the mantle. This multiscale model explicitly takes into account the evolution of crystal preferred orientations (CPO) of olivine and of the mechanical anisotropy during the deformation. We performed a series of numerical experiments simulating the uniaxial extension of a homogeneous (100% olivine) but anisotropic plate to test the role of the olivine CPO on the plate mechanical behavior and the link between CPO and mechanical anisotropy evolution. Even for this simple solicitation, different orientations and intensity of the initial olivine CPO result in variable plate strengths and deformation regimes. A plate with an initial CPO where the olivine [100] and [010] axes are concentrated at 45 degrees to the extension direction has high resolved shear stresses on the easy (010)[100] and (001)[100] slip systems of olivine. This results in low strength and in deformation by transtension. Plates with an initial CPO where the maximum of [100] axes is parallel or normal to the extension direction show a high initial strength. Isotropic plates have an intermediate behavior. The progressive rotation of olivine [100] axes toward the imposed stretching direction results in hardening in all models, except in those characterized by an initial concentration of olivine [100] axes normal to the imposed extension, in which softening is followed by hardening.
ISSN: 1525-2027

hal-00420063
https://hal.archives-ouvertes.fr/hal-00420063
DOI : 10.1029/2009GC002423

Éditeur(s) : HAL CCSD European Geosciences Union
Résumé : International audience
We develop and implement a new method to take into account the impact of waves into the 3-D circulation model SYMPHONIE (Marsaleix et al., 2008, 2009a), following the simplified equations of Bennis et al. (2011) which use glm2z-RANS theory (Ardhuin et al., 2008b). These adiabatic equations are completed by additional parameterizations of wave breaking, bottom friction and wave-enhanced vertical mixing, making the forcing valid from the surf zone through to the open ocean. The wave forcing is performed by wave generation and propagation models WAVEWATCH III® (Tolman, 2008, 2009; Ardhuin et al., 2010) and SWAN (Booij et al., 1999). The model is tested and compared with other models for a plane beach test case, previously tested by Haas and Warner (2009) and Uchiyama et al. (2010). A comparison is also made with the laboratory measurements of Haller et al. (2002) of a barred beach with channels. Results fit with previous simulations performed by other models and with available observational data. Finally, a realistic case of energetic waves travelling over a coast of the Gulf of Lion (in the northwest of the Mediterranean Sea) for which currents are available at different depths as well as an accurate bathymetric database of the 0-10 m depth range, is then simulated. A grid nesting approach is used to account for the different forcings acting at different spatial scales. The simulation coupling the effects of waves and currents is successful to reproduce the powerful northward littoral drift in the 0-15 m depth zone. More precisely, two distinct cases are identified: when waves have a normal angle of incidence with the coast, they are responsible for complex circulation cells and rip currents in the surf zone, and when they travel obliquely, they generate a northward littoral drift. These features are more complicated than in the test cases, due to the complex bathymetry and the consideration of wind and non-stationary processes. Wave impacts in the inner shelf are less visible since wind and regional circulation seem to be the predominant forcings. Besides, a discrepancy between model and observations is noted at that scale, possibly linked to an underestimation of the wind stress. Lastly, this three-dimensional method allows a good representation of vertical current profiles and permits to calculate the shear stress associated with wave and current. Future work will focus on the combination with a sediment transport model.
ISSN: 1812-0806

hal-00766548
https://hal.archives-ouvertes.fr/hal-00766548
https://hal.archives-ouvertes.fr/hal-00766548/document
https://hal.archives-ouvertes.fr/hal-00766548/file/os-8-657-2012.pdf
DOI : 10.5194/osd-8-2417-2011

Éditeur(s) : HAL CCSD
Résumé : International audience
In real world situations, each person is generally in contact with only a small fraction of the entire population and exchange information through these interactions. Their number and their frequency vary from one to another individual and may be much depending on mobility of individuals. The objective of this article is to better understand how human mobility may have an impact on mobile social networking systems. This should help to answer a question as: "How might an information, a rumor, a pathogen, etc., driven by physical proximity, spread through a population?". We present a first stage of our work in which we focus on percolation processes as information flow mechanisms. We propose a synthetic mobility model and we define an artificial world populated by heterogeneous agents who differ in their mobility. Simulations are conducted on a multi-agent programmable environment. Our experimental results clearly demonstrate positive correlations between agent mobility factors and percolation thresholds.
Procedia CS

hal-00767043
https://hal.archives-ouvertes.fr/hal-00767043
DOI : 10.1016/j.procs.2012.06.007

Éditeur(s) : HAL CCSD Editions Paralia CFL
Résumé : L'hydrodynamique du plateau continental du Golfe du Lion est généralement induite par les vents. Les simulations numériques réalisées par les modèles numériques de circulation océanique côtière aux équations primitives sont en général cohérentes avec les observations in-situ. Très peu d'observations étaient toutefois disponibles pendant les épisodes de tempêtes méditerranéennes. Aussi, la station BESSète (Bottom Experimental Station Sète), équipée d'un ADCP mesurant en continu les caractéristiques de houle et les profils verticaux de courants, a été implantée sur le plateau sous 70 m. Les premières données issues de cette station, acquises en février-mars 2007, confirment les schémas de circulations induits par les vents de Nord (Mistral,Tramontane). Un épisode de tempête (Hs>5m) a aussi pu être observé le 18 février 2007. De forts courants dont l'intensité peut atteindre 0,7 ms-1 y sont associés. Cette série de données est ensuite utilisée pour calculer les tensions decisaillements induites sur le fond. Sous 70 m, elles sont en général quasi-nulles excepté pendant l'épisode de tempête où l'action conjuguée des houles et des courants peut induire des contraintes susceptibles de mobiliser et déplacer le sédiment fin présent dans la zone. La très forte intensité des courants mesurés pendant la tempête amènent ensuite à reconsidérer les processus de transferts de quantité de mouvement entre atmosphère, océan et sédiments. Très schématiquement, sur le plateau, dès que la houle interagit avec le fond, la houle se transforme (réfraction, dissipation) et transmettrait de la quantité de mouvement à l'échelle des courants moyens. Cette hypothèse est retenue pour expliquer ces forts courants observés et pourrait être confirmée par d'autres travaux théoriques et numériques.
ISSN: 1760-8716

hal-00854000
https://hal.archives-ouvertes.fr/hal-00854000
DOI : 10.5150/jngcgc.2008.011-L

Éditeur(s) : HAL CCSD
Résumé : To understand the effect of inherited lithospheric structures on the continental plates deformation process, we have developed a multi scale model that explicitly takes into account an anisotropic viscosity due to the Crystal Preferred Orientation (CPO) of olivine in the mantle by coupling a viscoplastic self-consistent simulation of the deformation at the polycrystalline aggregate to a 3D Finite Element code. Using this tool, we calculate the mechanical behavior of a continental lithosphere submitted to extension for various initial structures. The first set of experiments investigates the deformation of a plate with a homogeneous initial olivine CPO. Results show that the macroscopic anisotropy is strongly dependent on the initial orientation of the olivine CPO relative to the solicitation and to its evolution. The second set of experiments aims to analyze the deformation of a continental plate containing pre-existing lithospheric scale shear zones. These multi-domain models show that the olivine mechanical anisotropy may induce the reactivation of pre-existing lithospheric scale shear zones in a plate submitted to rifting. In both cases, the results shows that the macroscopic mechanic anisotropy induced by the evolution of olivine CPO in the upper mantle is a key parameter to understand the deformation of the continental plates and to explain the observed reactivation of inherited structure from past tectonics events
Afin de comprendre l'effet des structures préexistantes sur la déformation des plaques continentales, nous avons développé une méthode de modélisation mécanique multi-échelle utilisant une viscosité anisotrope induite par les Orientations Préférentielles du Réseau (OPR) des cristaux d'olivine présents dans le manteau. Cette méthode en couple le calcul viscoplastique autocohérent de la déformation d'un agrégat d'olivine à un code éléments finis 3D. Elle a été utilisée pour le calcul du comportement mécanique d'une plaque continentale soumise à une extension. Une première série d'expériences numériques sur l'extension de plaque lithosphérique présentant des OPR initiales d'olivine homogènes a permis de montrer que l'anisotropie mécanique macroscopique est fortement dépendante de l'orientation initiale de l'OPR. La seconde série de simulations analyse l'extension d'une plaque continentale présentant une zone présentant des OPR d'olivine héritées d'un événement tectonique précédant. Les résultats de ces calculs multi-domaines que l'anisotropie mécanique de l'olivine peut expliquer la réactivation des zones de cisaillement héritées lors du rifting. Les résultats obtenus dans les deux séries de modèles montrent que l'anisotropie mécanique macroscopique induite par l'évolution des OPR d'olivine dans le manteau supérieur est un paramètre clé pour la compréhension de la déformation des plaques continentales et pour expliquer la réactivation observée de structures tectoniques, tels que les grands décrochements, lors des épisodes tectoniques ultérieurs.
https://tel.archives-ouvertes.fr/tel-00369463

tel-00369463
https://tel.archives-ouvertes.fr/tel-00369463
https://tel.archives-ouvertes.fr/tel-00369463/document
https://tel.archives-ouvertes.fr/tel-00369463/file/KnollThese09.pdf

Éditeur(s) : Springer Berlin / Heidelberg
Résumé : The role of particles in the fate and speciation of trace metals in macrotidal estuaries was studied using a surface complexation model (MOCO). Cadmium was selected as the target metal contaminant due to its reactivity in estuaries: cadmium behavior is mainly controlled by heterogeneous processes (sorption/desorption) related to salinity and suspended matter gradients. Various scenarios of suspended matter distribution according to salinity were simulated. The impact of surface properties (specific surface area, density of surface sites, acido-basic properties, and complexation constant) was evaluated using data collected on particles from the Gironde, Loire, and Seine estuaries. Our results show that particle surface properties, evaluated on the basis of various parameters, are instrumental in "non-conservative" contaminant speciation in the estuarine environment. Their evaluation enables us to understand and simulate, to a large extent, the fate of "Cd-type" contaminants (whose behavior is controlled by competition between sorption and desorption processes). The natural variations of these properties can be responsible for significant modifications of the Cd speciation in the macrotidal estuaries where salinity and SM gradients are very strong.
The Handbook of Environmental Chemistry (1433-6839) (Springer Berlin / Heidelberg), 2006 , Vol. 5H , P. 265-301

Droits : 2006 Springer
http://archimer.ifremer.fr/doc/2006/publication-2005.pdf
DOI:10.1007/b89479
http://archimer.ifremer.fr/doc/00000/2005/

Éditeur(s) : HAL CCSD
Résumé : International audience
In this paper, we focus on the very specificity of rumors as pieces of information for modeling their process of propagation. We consider a population of pedestrians walking in a city and we assume that a rumor is transmitted by word of mouth from one to another. Although the diffusion of a rumor is of course a multi-dimensional process driven by sociological, economical and psychological elements, in this first step, we emphasize one main dimension of this complex phenomenon only. This dimension is the neighborhood of individuals likely to spread the information. With a confrontation of two antagonistic properties of the neighborhood that are profusion and scarcity of spreaders, we highlight specific characteristics of rumors. This study could lead to the psychological mechanism involved in the decision for a person to become or not a spreader himself/herself. In summary, we study if scarcity could be the silver bullet explaining how a rumor spreads.
ASONAM 2015 : IEEE/ACM International Conference on Advances in Social Networks Analysis and Mining
Paris, France

hal-01252936
https://hal.archives-ouvertes.fr/hal-01252936
DOI : 10.1145/2808797.2809299

Éditeur(s) : HAL CCSD Institute for Scientific Computing and Information
Résumé : International audience
In this paper, we solve a problem describing the mechanical deformations of a porous medium in the presence of a monophasic linear flow or a two phase nonlinear flow with the purpose of modelizing subsidence of hydrocarbon reservoirs. An essential characteristics of this problem is that the mechanical deformation and the flow have different time scales. In petroleum industry, one uses different very efficient simulators for the flow problem and the mechanical deformations, which enables to handle complex models. Therefore it is necessary to be able to combine as efficiently as possible the exploitation of these simulators. We propose two alternative splitting approaches. The first one is the staggered algorithm used by engineers, which amounts to a Gauss-Seidel method in the one phase linear case. The second approach is based upon the preconditioned conjugate gradient method. We use a numerical multi-scale method in both of these algorithms. We compare these two approaches and we show that the preconditioned conjugate gradient algorithm is faster and more robust than the staggered algorithm. Applying the preconditioned conjugate gradient algorithm therefore seems to compensate for the fact that the inf-sup condition for the mixed discretization method is not satisfied when combining the simulators for the mechanical deformations and for the flow computations.
ISSN: 1705-5105

Droits : http://creativecommons.org/licenses/by/
hal-01449039
https://hal.archives-ouvertes.fr/hal-01449039
https://hal.archives-ouvertes.fr/hal-01449039/document
https://hal.archives-ouvertes.fr/hal-01449039/file/DHLE.pdf

Éditeur(s) : Universite Montpellier II
Résumé : Since 1980, the expansion of a green macro-alga: Valonia aegagropila (C Agardh) is observed in Salses-Leucate lagoon (France). It is currently distributed in the north of the lagoon with important biomasses (40 gDW/m²) eroding the cover of Zostera noltii. The free form of the alga can be transported with the surface or bottom currents depending on seasons. It multiplies mainly by vegetative reproduction. There are few studies on the ecophysiological capacities of V. aegagropila. This work tries to answer why (physiological adaptation) and how (mechanical process of transport) the alga invaded the lagoon, with an approach including observations, experiments in controlled environment and biological and hydrodynamic models. The growth capacities depend on temperature and light intensities, the nutrients absorption rates and internal nitrogen and phosphorus internal quotas were measured and modelled using a Droop model based on internal quota. Vertically transport was studied with laboratory experiments and measurements of biomass transport were made into the lagoon. The biological model (growth, vertical transport, mortality) was coupled to the MARS 3D hydrodynamic model with a meshgrid of 160m. The results show an adaptation of the alga to low availability of phosphorus and an annual growth of biomass controlled by the availability of nutrient during winter. The alga seems to occupy the whole zones where growth is optimal and the risk of invasion of the southern part of the lagoon is limited. This work opens on research prospects on an ecological model (confronting physiological capacities and competition of V. aegagropila, Zostera noltii, green algae and primary production), new physiological experiments, ecological observations and potential valorisation of V. aegagropila.
Depuis 1980, est observée dans l'étang de Salses-Leucate l'expansion d'une macro-algue verte : Valonia aegagropila (C. Agardh). En 2004, elle était présente sur la presque totalité de la moitié nord de la lagune avec des biomasses importantes (jusqu'à 600 gPS/m²). L'algue envahit et érode également la couverture d'herbiers garant de la biodiversité, de la productivité et de la stabilité de l'écosystème. V. aegagropila se reproduit essentiellement de manière végétative (fragmentation des thalles) et possède la particularité de retenir de l'oxygène de la photosynthèse dans sa structure sphérique. Cet oxygène piégé lui donne la possibilité de mouvement sur la verticale et d'être transportée dans le domaine par les courants. Les conditions physico-chimiques de l'étang présentent de fortes variations saisonnières en salinité, en température et en turbidité, ainsi que des apports nutritifs faibles : la production primaire est principalement limitée par le phosphore. Il existe malheureusement peu d'informations sur V. aegagropila ainsi que trop peu de connaissances sur son écophysiologie. Elle semble vivre dans des milieux plutôt oligotrophe dans des régions tropicales à sub-tropicales. Ce travail basé sur une approche d'observations de terrain, d'expérimentations en milieu contrôlé (en laboratoire) et de modélisation des processus, a permis d'une part d'explorer les capacités adaptatives physiologiques de V. aegagropila aux conditions environnementales de l'étang et d'autre part de mettre à jour les modes de fonctionnement de la dynamique spatio-temporelle de la population. Les capacités de croissance ont été mesurées sur un large spectre de température et de lumière. Les capacités d'absorption des sels nutritifs dans l'eau et les facultés de l'algue à stocker l'azote et le phosphore dans ses tissus ont également été étudiées. D'autre part, un modèle de dynamique des populations a été conceptualisé puis développé. Les processus pris en compte dans ce modèle sont la croissance de l'algue (modèle à quota interne), la flottabilité de l'algue et la mortalité par surdensité. Ces processus ont été paramétrés en majeure partie par des expérimentations réalisées en laboratoire. Ce modèle 0D a par la suite était couplé au modèle hydrodynamique MARS3D (modèle Ifremer) mis en place sur la lagune de Salses-Leucate, utilisant deux grilles de calcul (160m ou de 80m de résolution). Les simulations réalisées permettent d'appréhender les capacités spatio-temporelles de la croissance de l'algue dans l'étang, le turnover annuel de la biomasse totale et les attracteurs de biomasse du système sous différents évènements météorologiques. Ces résultats sont comparés avec les répartitions cartographiques de la population observées in situ en 1999 et 2004 et des flux de biomasses mesurés au cours d'observations de terrain entre juin 2003 et septembre 2004. L'ensemble des résultats montre d'une part une adaptation de l'algue à évoluer dans un milieu pauvre en phosphore et d'autre part une croissance annuelle de la biomasse totale qui est principalement contrôlée par les apports hivernaux en sels nutritifs dans la lagune. Les résultats des simulations montrent également que V. aegagropila semble occuper à présent la majeure partie des zones favorables à sa croissance. Il est également montré que si sa capacité de mouvement peut favoriser la dispersion d'individus dans la lagune et accélérer la croissance de la population pour de faibles biomasses initiales, cette même capacité de mouvement joue plutôt un rôle de régulation de la population lorsque la biomasse totale devient importante. On peut penser que le risque de colonisation de l'herbier à zostère de la partie sud de la lagune (bassin de Salses) est limité. Ce travail ouvre enfin des perspectives de recherche sur l'amélioration du modèle de dynamique des populations de l'espèce, sur de nouvelles expérimentations à réaliser ou encore sur la surveillance écologique du milieu. Des propositions sont faites pour concevoir un modèle écologique confrontant les capacités physiologiques des macrophytes (algues vertes, Valonia et zostères) afin d'apréhender les phénomènes de compétitions et les modes de fonctionnement du réseau trophique de la lagune de Salses- Leucate. Des pistes sur la valorisation de la matière algale de V. aegagropila sont enfin proposées.

Droits : info:eu-repo/semantics/openAccess
http://archimer.ifremer.fr/doc/2006/these-2453.pdf
http://archimer.ifremer.fr/doc/00000/2453/

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We investigated the deformation mechanisms and the seismic properties of 10 eclogite samples from different localities (Alps, Norway, Mali and eastern China) through the analysis of their microstructures and lattice-preferred orientations (LPO). These samples are representative of various types and intensity of deformation under eclogitic metamorphic conditions. Omphacite and garnet LPO were determined from electron backscatter diffraction (EBSD) technique. Garnet appears to be almost randomly oriented whereas omphacite develops strong LPO, characterized by the [001]-axes concentrated sub-parallel to the lineation, and the (010)-poles concentrated sub-perpendicular to the foliation. In order to analyze the deformation mechanisms that produced such omphacite LPO, we compare our observations to LPO simulated by viscoplastic self-consistent numerical models. A good fit to the measured LPO is obtained for models in which the dominant slip systems are 1/2h110i{11 ¯ 0}, [001] {110} and [001] (100). Dominant activation of these slip systems is in agreement with TEM studies of naturally deformed omphacite. Seismic properties of eclogite are calculated by combining the measured LPO and the single crystal elastic constants of omphacite and garnet. Although eclogite seismic anisotropies are very weak (less than 3% for both P-and S-wave), they are generally characterized by a maximum P-wave velocity sub-parallel to the lineation and by a minimum velocity approximately normal to foliation. The mean P-and S-wave velocities are high (respectively, 8.6 and 4.9 km/s). The S-wave anisotropy pattern displays complex relationships with the structural frame but the fast polarization plane generally tends to be parallel to the foliation. Calculated reflection coefficients show that an eclogite/crust interface is generally a good reflector (Rc > 0.1), whereas an eclogite body embedded in the upper mantle would be hardly detectable.
ISSN: 0040-1951

hal-01389715
http://hal.univ-reunion.fr/hal-01389715
http://hal.univ-reunion.fr/hal-01389715/document
http://hal.univ-reunion.fr/hal-01389715/file/Bascou_eclo-sismo_tphy2001_hal.pdf
DOI : 10.1016/S0040-1951(01)00156-1

Éditeur(s) : HAL CCSD
Résumé : International audience
After defining the High Performance Pre- Computing --referred as HPPC-- concept, the aim of the present study is to develop a prototype whether to approve or not the benefits of this concept. Our application case tries to answer the geophysical issue of coastal flooding. This is an example of an alert system based on the HPPC architecture, thus on pre-computed scenarios. The prototype provides the scientists with an ergonomic and on-demand tool allowing the run of scenarios of any implemented numerical models. These runs are available through a web application which submits the corresponding jobs on the remote french public cluster of HPC@LR. In this study we simulate the waves propagation over a Mediterranean grid using the wave model WaveWatch III⃝R . A reference simulation using usual conditions is approximated using the k-NN algorithm over 12, 98 and then 980 pre-computed scenarios. This simple experiment demonstrates how useful the pre-computing of scenarios is for alert systems as far as enough and relevant scenarios are pre-computed. This is the reason why searches continue in each critical points of the HPPC architecture such as the design of experiment, the approximation of the results by meta-models and the research of the closest scenarios in this big data context.
4th International Conference on Knowledge and Systems Engineering
Danang, Vietnam

lirmm-00736797
https://hal-lirmm.ccsd.cnrs.fr/lirmm-00736797
https://hal-lirmm.ccsd.cnrs.fr/lirmm-00736797/document
https://hal-lirmm.ccsd.cnrs.fr/lirmm-00736797/file/PID2396685.pdf
DOI : 10.1109/KSE.2012.36

Éditeur(s) : HAL CCSD Kluwer
Résumé : This paper presents some considerations about hybrid optimization algorithms useful to optimize real complex system. The given indication could be used by readers to conceive hybrid algorithms. These considerations have been deducted from a concrete application case: the satellites constellations design problem. But each of the advanced techniques proposed in this paper are considered in a more general way to solve other problems. This problem is used to illustrate the techniques along the paper because it is grouping many characteristics (di culties) of contemporary real complex systems: the size and the characteristics of the search space engendered by a combinatorial problem; The irregularity of the criterions; The mathematical and physical heterogeneity of parameters forbids the use of classical algorithms; The evaluation of a solution, which uses a time consuming simulation; A need of accurate values. More details are available in previous papers ([?], [?], [?], [?]). For these reasons, we could learn a lot from this experiment in order to detach hybrid techniques usable for problems having close characteristics. This paper presents the historic leading to the current algorithm, the modeling of the complex system and the sophisticated algorithm proposed to optimize it. Application cases and ways to built signi cant tests of hybrid algorithm are also given.
International Federation for Information Processing

hal-00602279
https://hal.archives-ouvertes.fr/hal-00602279

Résumé : La richesse des activités et des résultats de l'Ifremer s'est confirmée en 2002. Ce rapport d'activité décrit de nombreux résultats : des résultats scientifiques comme la faible variabilité génétique des crevettes de la filière néo-calédonienne ou la découverte d'assemblages écosystémiques originaux associés aux sorties d'hydrocarbures dans le golfe de Guinée, des résultats technologiques avec le succès de la diffusion du logiciel de simulation numérique des engins de pêche (DynamiT) ou le transfert opérationnel de l'outil de cartographie sismique à trois dimensions. Il montre également des résultats dans le domaine de la gestion de données avec la production d'un cédérom regroupant les données de 108 campagnes océanographiques en Méditerranée, ou avec la constitution de systèmes d'information géographique interfacés à des modèles dynamiques qui constitue un outil essentiel de la gestion intégrée des zones côtières. [OCR NON CONTRÔLE]

Droits : info:eu-repo/semantics/openAccess
http://archimer.ifremer.fr/doc/2002/rapport-4829.PDF
http://archimer.ifremer.fr/doc/00000/4829/

Éditeur(s) : HAL CCSD
Résumé : International audience
More and more animal species are endangered every day on earth. In order to study their adaptation to world and climate change and their chances of survival, numerous initiatives have been taken that mostly need human intrusion into animal communities. Today mobile devices enable researchers to go beyond this limit. In this paper, we propose an original solution that consists on a new framework for detecting individual songs in a bird population and identifying remotely by this way their collective behavior in movements without human interaction. Movement patterns are elicited by analyzing data collected via wireless sensors fitted with microphone. Whereas similar methods use mobile devices fitted on some specimens, we rather propose fixed sensors. We demonstrate that this solution provides a good answer to technical constraints assessed by the context and we discuss results of experimental simulations that allow to define optimized parameters for the architecture to be set up on the ground. Experimental results are provided and show the relative impact of different parameters such as the number of sensors or the population size on the detection rate.
Proceedings of the 8th International Conference on Advances in Mobile Computing and Multimedia (MOMM 2010)

hal-00601641
https://hal.archives-ouvertes.fr/hal-00601641

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The objectives are to study and model the aggregate wind power fluctuations dynamics in the multifractal framework. We present here the analysis of aggregate power output sampled at 1 Hz during three years. We decompose the data into several Intrinsic Mode Functions (IMF) using Empirical Mode Decomposition (EMD). We use a new approach, arbitrary order Hilbert spectral analysis, a combination of EMD approach with Hilbert spectral analysis (or Hilbert Huang Transform) and the classical structure function analysis to extract the scaling exponents or multifractal spectrum $zeta(q)$: this function provides a full characterization of a process at all intensities and all scales. The application of both methods, i.e. structure function and arbitrary-order Hilbert spectral analyses, give similar results indicating that the aggregate power output from a wind farm, possesses intermittent and multifractal properties. In order to check this result, we generate stochastic simulations of a Multifractal Random Walk (MRW) using a log-normal stochastic equation. We show that the simulation results are fully compatible with the experimental results.
Physica A

hal-01527887
https://hal.archives-ouvertes.fr/hal-01527887
DOI : 10.1016/j.physa.2013.04.038

Éditeur(s) : HAL CCSD
Résumé : International audience
The present study examined the influence of momentum sequence (positive vs. negative) and environmental climate (hot-wet vs. neutral) on supporters' (i.e. virtual observers') reported levels of perceived psychological momentum (PM) during a simulated cycling competition. Participants supported one of two competing cyclists involved in a race that was displayed on a screen in a lecture hall. The race scenario was manipulated so that the supported cyclist appeared to undergo either a positive or negative momentum sequence. In addition, participants were either exposed to a hot-wet environmental climate or to a neutral environmental climate while observing the race scenario. According to the results, reported levels of PM were higher in the positive momentum sequence condition than in the negative momentum sequence condition, consistent with the notion that supporters' PM is influenced by a positivity bias, and reported levels of PM were also found to be higher in the hot-wet climate condition than in the neutral climate condition, consistent with the notion that environmental climate is a contextual factor that influences PM through the operation of a causal augmenting mechanism.
European journal of sport sciences

hal-01343262
https://hal.univ-antilles.fr/hal-01343262
DOI : 10.1080/17461391.2015.1062566