Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We investigated the deformation mechanisms and the seismic properties of 10 eclogite samples from different localities (Alps, Norway, Mali and eastern China) through the analysis of their microstructures and lattice-preferred orientations (LPO). These samples are representative of various types and intensity of deformation under eclogitic metamorphic conditions. Omphacite and garnet LPO were determined from electron backscatter diffraction (EBSD) technique. Garnet appears to be almost randomly oriented whereas omphacite develops strong LPO, characterized by the [001]-axes concentrated sub-parallel to the lineation, and the (010)-poles concentrated sub-perpendicular to the foliation. In order to analyze the deformation mechanisms that produced such omphacite LPO, we compare our observations to LPO simulated by viscoplastic self-consistent numerical models. A good fit to the measured LPO is obtained for models in which the dominant slip systems are 1/2h110i{11 ¯ 0}, [001] {110} and [001] (100). Dominant activation of these slip systems is in agreement with TEM studies of naturally deformed omphacite. Seismic properties of eclogite are calculated by combining the measured LPO and the single crystal elastic constants of omphacite and garnet. Although eclogite seismic anisotropies are very weak (less than 3% for both P-and S-wave), they are generally characterized by a maximum P-wave velocity sub-parallel to the lineation and by a minimum velocity approximately normal to foliation. The mean P-and S-wave velocities are high (respectively, 8.6 and 4.9 km/s). The S-wave anisotropy pattern displays complex relationships with the structural frame but the fast polarization plane generally tends to be parallel to the foliation. Calculated reflection coefficients show that an eclogite/crust interface is generally a good reflector (Rc > 0.1), whereas an eclogite body embedded in the upper mantle would be hardly detectable.
ISSN: 0040-1951

hal-01389715
http://hal.univ-reunion.fr/hal-01389715
http://hal.univ-reunion.fr/hal-01389715/document
http://hal.univ-reunion.fr/hal-01389715/file/Bascou_eclo-sismo_tphy2001_hal.pdf
DOI : 10.1016/S0040-1951(01)00156-1

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The nucleation and growth processes of spherulitic alkali feldspar have been investigated in this study through X-ray microtomography and electron backscatter diffraction (EBSD) data. Here we present the first data on Shape Preferred Orientation (SPO) and Crystal Preferred Orientation (CPO) of alkali feldspar within spherulites. The analysis of synchrotron X-ray microtomography and EBSD datasets allowed us to study the morphometric characteristics of spherulites in trachytic melts in quantitative fashion, highlighting the three-dimensional shape, preferred orientation, branching of lamellae and crystal twinning, providing insights about the nucleation mechanism involved in the crystallization of the spherulites. The nucleation starts with a heterogeneous nucleus (pre-existing crystal or bubble) and subsequently it evolves forming “bow tie” morphologies, reaching radially spherulitic shapes in few hours. Since each lamella within spherulite is also twinned, these synthetic spherulites cannot be considered as single nuclei but crystal aggregates originated by heterogeneous nucleation. A twin boundary may have a lower energy than general crystal–crystal boundaries and many of the twinned grains show evidence of strong local bending which, combined with twin plane, creates local sites for heterogeneous nucleation.This study shows that the growth rates of the lamellae (10− 6–10− 7 cm/s) in spherulites are either similar or slightly higher than that for single crystals by up to one order of magnitude. Furthermore, the highest volumetric growth rates (10− 11–10− 12 cm3/s) show that the alkali feldspar within spherulites can grow fast reaching a volumetric size of ~ 10 μm3 in 1 s.
ISSN: 0024-4937

hal-01172356
https://hal.archives-ouvertes.fr/hal-01172356
DOI : 10.1016/j.lithos.2014.12.003

Éditeur(s) : HAL CCSD Elsevier
Résumé : We studied the evolution of the microstructure of ice-Ih during static recrystallization by stepwise annealing experiments. We alternated thermal annealing and electron backscatter diffraction (EBSD) analyses on polycrystalline columnar ice pre-deformed in uniaxial compression at temperature of −7 °C to macroscopic strains of 3.0–5.2. Annealing experiments were carried out at −5 °C and −2 °C up to a maximum of 3.25 days, typically in 5–6 steps. EBSD crystal orientation maps obtained after each annealing step permit the description of microstructural changes. Decrease in average intragranular misorientation at the sample scale and modification of the misorientation across subgrain boundaries provide evidence for recovery from the earliest stages of annealing. This initial evolution is similar for all studied samples irrespective of their initial strain or annealing temperature. After an incubation period ≥1.5 h, recovery is accompanied by recrystallization (nucleation and grain boundary migration). Grain growth proceeds at the expense of domains with high intragranular misorientations, consuming first the most misorientated parts of primary grains. Grain growth kinetics fits the parabolic growth law with grain growth exponents in the range of 2.4–4.0. Deformation-induced tilt boundaries and kink bands may slow down grain boundary migration. They are stable features during early stages of static recrystallization, only erased by normal growth, which starts after >24 h of annealing.
ISSN: 0191-8141

hal-01685644
https://hal.archives-ouvertes.fr/hal-01685644
DOI : 10.1016/j.jsg.2017.05.001

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We have performed tri-axial compression experiments on olivine aggregates at 900 °C and at a confining pressure of 300 MPa in a high-resolution gas-medium mechanical testing apparatus. Deformation at two different constant strain rates (1.1 × 10− 5 s− 1 and 3.4 × 10− 4 s− 1) yields continuous hardening, reaching maximal differential stresses of 930 and 1076 MPa, respectively, before sample failure at ca. 10% strain. The deformed samples were characterized by electron backscatter diffraction (EBSD) and transmission electron microscopy (TEM). Crystallographic preferred orientations (CPO) are weak but reveal an alignment of the [010] axes around the compression direction and some concentration of [001] and [100] axes normal to it. TEM observations confirm plastic deformation by dislocation glide, with both [001] and [100] Burgers vectors. Electron tomography, performed for the first time on deformed fined-grained olivine, shows that [001] dislocations glide extensively on {110} and {130} planes, in complement to the (010) and (100) glide planes often reported at high temperatures. [100] dislocations glide mostly on (010), but {011} and {041} planes are also activated. The experimental CPO and relative activity of slip systems are well reproduced by viscoplastic self-consistent simulations in which all [100] and [001] slip systems have similar strengths. They are also consistent with olivine CPO from natural samples deformed at low temperature. Comparison of the present mechanical results to those obtained for olivine single-crystals at similar conditions shows that at low temperature (below 1100 °C) and high stress (> 300 MPa) polycrystalline olivine has a more complex mechanical behavior than single crystals. However, both datasets advocate for a much weaker dry mantle lithosphere than previously thought.
ISSN: 0040-1951

hal-01053513
https://hal.archives-ouvertes.fr/hal-01053513
DOI : 10.1016/j.tecto.2014.03.022

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We report gabbroic dikes in the plagioclase tectonite domains of the Ojén and Ronda massifs (Betic Cordillera, southern Spain), which record crystallization at low-pressure syn-, or slightly postkinematic to the late ductile history of the Betic Peridotite in the westernmost Mediterranean. We present mineral major and trace element compositional data of discordant gabbroic dikes in the Ojén massif and gabbroic patches in the Ronda massif, complemented by the whole rock and electron backscattered diffraction (EBSD) data of the Ojén occurrence. In the Ojén massif, gabbro occurs as 1–3 centimeter wide discordant dikes that crosscut the plagioclase tectonite foliation at high angle. These dikes are composed of cm-scale igneous plagioclase and clinopyroxene crystals that show shape preferred orientations subparallel to the lineation of the host peridotite and oblique to the trend of the dike. Intrusion of Ojén gabbro dikes is coherent with the stress field that formed the high temperature, ductile plagioclase tectonite foliation and then attests for a mantle igneous event prior to the intracrustal emplacement of the massif. In the Ronda massif, gabbroic rocks crystallized in subcentimeter wide anastomozing veins, or as interstitial patches in the host dunite. They are mostly composed of plagioclase and clinopyroxene. Plagioclase composition is bytownitic in the Ojén, and andesinic in the Ronda massif. Clinopyroxene in both places shows identical, light Rare-Earth Element (LREE) depleted trace element patterns. The calculated trace element composition of melts in exchange equilibrium with the studied igneous clinopyroxenes reflects LREE-enriched character coupled with negative Eu anomaly, and indicates that gabbro-forming melts in Ronda and Ojén share a common melt source with an island arc tholeiitic affinity. Geothermobarometric data and liquidus mineralogy indicate that gabbro crystallization occurred at shallow depths (0.2–0.5 GPa) in a 7–16 km thick lithospheric section. These data suggest that gabbro-forming melts in the Betic Peridotite record a mantle igneous event at very shallow depths and provide evidence for the hyperextension of the continental lithosphere compatible with extreme backarc basin extension induced by the slab rollback of the Cenozoic subduction system in the westernmost Mediterranean.
ISSN: 0040-1951

hal-01172246
https://hal.archives-ouvertes.fr/hal-01172246
DOI : 10.1016/j.tecto.2015.03.011

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Espinho Branco anatexite, located within a transcurrent, high-temperature shear zone in NE Brazil, was the subject of a comprehensive petrostructural study (Anisotropy of Magnetic Susceptibility - AMS, Anisotropy of Anhysteretic Remanence - AAR, Electron Backscatter Diffraction - EBSD) to evaluate the compatibility of different fabrics with the kinematics of melt deformation. Magnetite dominates susceptibilities larger than 1 mSI and biotite displays [001] lattice directions consistent with AMS k3 axes. In contrast, migmatites with a susceptibility lower than 0.5 mSI and no visible mesoscopic foliation provide crystallographic fabrics distinct from AMS and AAR. However, AAR remains consistent with the regional strain field. These results suggest that the correlation of field, AMS and crystallographic fabrics is not always straightforward despite the relatively simple organisation of the magnetic fabric in the anatexite. We conclude that AMS recorded the final stages of the strain field in the migmatite irrespective of its complex mesoscale structures and contrasting crystallographic fabrics.
ISSN: 0191-8141

hal-00823056
https://hal.archives-ouvertes.fr/hal-00823056
DOI : 10.1016/j.jsg.2012.12.008

Éditeur(s) : HAL CCSD
Résumé : International audience
The influence of Mn solute atoms on sub-grain boundary mobilities in Al has been determined by accurate electron backscatter diffraction analysis of the sub-grain sizes and misorientations during recovery annealing. High purity Al-0.1 and 0.3 wt.% Mn alloys were deformed by plane strain compression at room temperature to equivalent strains of 1.8 and annealed in the temperature range 150-300 °C. An original method of image analysis on sub-boundaries from electron backscatter diffraction maps was applied to quantify the sub-grain size distributions. The change in average sub-grain size with time at several temperatures was then used to estimate sub-grain boundary mobilities in both Al-Mn alloys. The activation energies for sub-grain mobility were found to be 48 and 52 and kJ.mol^-1 for the 0.1 and 0.3 % Mn alloys respectively, with the higher Mn alloy exhibiting lower rates. The sub-boundary mobilities are higher than expected from previous similar work on deformed Al-Si crystals. The orientation dependence of sub-grain growth is also examined.
International Journal of Materials Research

emse-00463551
https://hal-emse.ccsd.cnrs.fr/emse-00463551
DOI : 10.3139/146.110057

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
This paper presents Digital Image Correlation (DIC) and Infrared Thermography (IRT) methods to investigate the thermomechanical behavior of an aluminum at the microstructural scale. Electron BackScattered Diffraction (EBSD) is used to characterize the microstructure of a 3 mm thick specimen with centimetric grain size. This study combines the following imaging techniques: DIC to obtain displacement and strain fields during the test, and IRT to estimate temperature and heat source fields induced by the mechanical loading. Ultimately, the aim of this methodology is to provide energy balance during mechanical test at the scale of the microstructure, in order to propose thermomechanical con-stitutive modelling of crystalline plasticity.
ISSN: 0143-8166

hal-01287711
https://hal.archives-ouvertes.fr/hal-01287711
https://hal.archives-ouvertes.fr/hal-01287711/document
https://hal.archives-ouvertes.fr/hal-01287711/file/Local_experimental_investigations_Li_al_2016.pdf
DOI : 10.1016/j.optlaseng.2016.01.001

Éditeur(s) : HAL CCSD Geological Society of London
Résumé : This paper presents the background for the calculation of physical properties of an aggregate from constituent crystal properties and the texture of the aggregate in a coherent manner. Emphasis is placed on the important tensor properties of 2nd and 4th rank with applications in rock deformation, structural geology, geodynamics and geophysics. We cover texture information that comes from pole figure diffraction and single orientation measurements (electron backscattered diffraction or EBSD, electron channelling pattern, Laue pattern, optical microscope universal-stage). In particular, we provide explicit formulae for the calculation of the averaged tensor from individual orientations or from an orientation distribution function (ODF). For the latter we consider numerical integration and an approach based on the expansion into spherical harmonics. This paper also serves as a reference paper for the mathematical tensor capabilities of the texture analysis software MTEX, which is a comprehensive, freely available MatLab toolbox that covers a wide range of problems in quantitative texture analysis, for example, ODF modelling, pole figure to ODF inversion, EBSD data analysis and grain detection. MTEX offers a programming interface which allows the processing of involved research problems as well as highly customizable visualization capabilities; MTEX is therefore ideal for presentations, publications and teaching demonstrations.
Deformation Mechanisms, Rheology and Tectonics: Microstructures, Mechanics and Anisotropy

hal-00688833
https://hal.archives-ouvertes.fr/hal-00688833

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Prediction of ice mass flow and associated dynamics is pivotal at a time of climate change. Ice flow is dominantly accommodated by the motion of crystal defects – the dislocations. In the specific case of ice, their observation is not always accessible by means of the classical tools such as X-ray diffraction or transmission electron microscopy (TEM). Part of the dislocation population, the geometrically necessary dislocations (GNDs) can nevertheless be constrained using crystal orientation measurements via electron backscattering diffraction (EBSD) associated with appropriate analyses based on the Nye (1950) approach. The present study uses the Weighted Burgers Vectors, a reduced formulation of the Nye theory that enables the characterization of GNDs. Applied to ice, this method documents, for the first time, the presence of dislocations with non-basal or Burgers vectors. These or dislocations represent up to of the GNDs observed in laboratory-deformed ice samples. Our findings offer a more complex and comprehensive picture of the key plasticity processes responsible for polycrystalline ice creep and provide better constraints on the constitutive mechanical laws implemented in ice sheet flow models used to predict the response of Earth ice masses to climate change.
ISSN: 0012-821X

hal-01685565
https://hal.archives-ouvertes.fr/hal-01685565
DOI : 10.1016/j.epsl.2017.06.020

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We present an integrated study of geochemistry, petrofabrics and seismic properties of strongly sheared eclogites from the Chinese Continental Scientific Drilling (CCSD) project in the Sulu ultrahigh-pressure (UHP) metamorphic terrane, eastern China. First, geochemical data characterize diverse protoliths of the studied eclogites. The positive Eu- and Sr-anomalies, negative Nb anomaly and flat portion of heavy rare earth elements in coarse-grained rutile eclogites (samples B270 and B295) suggest a cumulate origin in the continental crust, whereas the negative Nb anomaly and enrichment of light rare earth elements in retrograde eclogites (samples B504, B15 and B19) imply an origin of continental basalts or island arc basalts. Second, P-wave velocities (V-p) of three typical eclogite samples were measured under confining pressures up to 500 MPa and temperatures to 700 degrees C. At 500 MPa and room temperature, the mean V-p reaches 8.50-8.53 km/s in samples B270 and B295 but drops to 7.86 km/s in sample B504, and the P-wave anisotropy changes from 1.7-2.7% to 5.5%, respectively. The pressure and temperature derivatives of V-p are larger in the retrograde eclogite than in fresh ones. Third, the electron backscatter diffraction (EBSD) measurements of the eclogites reveal random crystal preferred orientation (CPO) of garnet and pronounced CPO of omphacite, which is characterized by a strong concentration of [001]-axes sub-parallel to the lineation and of (010)-poles perpendicular to the foliation. The asymmetric CPO of omphacite in sample B270 recorded a top-to-the-south shear event during subduction of the Yangtze plate. The calculated fastest V-p is generally sub-parallel to the lineation, but a different deformation environment during exhumation could form second-order variations in omphacite CPO and affect the V-p distribution in eclogites (e.g., the fastest V-p is at similar to 35 degrees from the foliation in sample 13295). Comparison between measured and calculated seismic properties indicates that the CPO of omphacite controls the seismic anisotropy of eclogites at high pressure, and compositional layering and retrograde minerals will increase the anisotropy. Calculated P-wave velocities agree well with velocities measured at 500 MPa and room temperature for fresh eclogites, but much higher than those of retrograde eclogite. As a case study, the laboratory-derived V-p-P and V-p-T relationships were used to estimate P-wave velocities of eclogites and peridotites beneath the Western Superior Province, Canada. The results indicate that besides the fabric-induced anisotropy, the direction dependence of pressure and temperature derivatives of V-p can significantly increase seismic anisotropy of eclogites with depth, which results in eclogites being an important candidate for the seismic anisotropy in the upper mantle. Due to their very high density and velocity, garnet-rich eclogites within peridotite could be detected in seismic reflections in subduction zones.
ISSN: 0040-1951

hal-00463512
https://hal.archives-ouvertes.fr/hal-00463512
DOI : 10.1016/j.tecto.2008.09.027

Éditeur(s) : HAL CCSD Geological Society of London
Résumé : International audience
The mylonitic Cambrian quartzites, Moine Thrust Zone, NW Scotland, have long been used to study microstructural and petrofabric evolution and to develop understanding of grain-scale processes accommodating large-scale displacements. Today, structural geology is entering a new age of understanding of the basic processes involved in microstructural evolution due to the emergence of novel instrumental techniques and theoretical models. It seems apposite therefore to re-evaluate the microstructure of one example of this classic quartz mylonite from the Stack of Glencoul, Assynt, using arguably the most important of these new techniques, electron backscattered diffraction (EBSD). The three-dimensional (3D) microstructure and petrofabric of this rock was analysed using EBSD, to: 1) corroborate previous optical and X-ray texture goniometry measurements; 2) investigate the potential for sampling and/or tectonic sectioning bias that may be introduced inadvertently into any petrofabric analysis; and 3) predict its seismic properties. It is found that microstructures do differ between orthogonal structural sections, leading to variations in strengths of different components in the overall petrofabric that might impact on seismic properties. The results emphasize the true 3D nature of microstructures and petrofabrics, which can be recognized and accommodated more readily by this new generation of analytical techniques.
Continental Tectonics and Mountain Building: The Legacy of Peach and Horne

hal-00565749
https://hal.archives-ouvertes.fr/hal-00565749

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The subcontinental lithospheric mantle evolves through time due to tectonic events and processes as static recrystallization and melt percolation. To constrain the extent of these processes in the South Patagonian subcontinental mantle lithosphere we performed a microstructural and Electron Backscattered Diffraction (EBSD) study of a suite of 35 peridotite xenoliths brought to the surface by Plio-Pleistocene alkaline volcanic rocks from Gobernador Gregores and Pali Aike. All samples show a well-developed olivine and pyroxene crystallographic preferred orientation (CPO), consistent with deformation by dislocation creep with dominant activation of [100]{0kl} in olivine. The coarse granular or tabular textures and the low density of intracrystalline deformation features indicate that deformation was followed by annealing under static conditions. The xenoliths also show microstructural evidence of multiple episodes of reactive melt percolation. Neither annealing nor melt percolation erased the olivine CPO, which has [010]-fiber, [100]-fiber and orthorhombic patterns in Pali Aike xenoliths and essentially [010]-fiber and orthorhombic patterns in Gobernador Gregores xenoliths. Seismic properties calculated based on the CPO and modal compositions are, however, rather homogeneous, with fast S-wave polarization and P-wave propagation parallel to the [100] olivine axis. The variation in the olivine CPO solely changes the minimum S-wave birefringence direction, which is normal to the foliation for axial-[010] olivine CPO. Average samples for the two localities, obtained by adding up the individual samples CPO data in a common reference frame, show, however, a 'normal' upper mantle anisotropy with a maximum S-wave birrenfringence of ca. 5% at high angle to the both the maximum [010] and [100] axes concentrations, that is in the foliation, but normal to the lineation, and a minimum birefringence at low angle to the [100] maximum, that is parallel to the lineation.
ISSN: 0040-1951

hal-01053500
https://hal.archives-ouvertes.fr/hal-01053500
DOI : 10.1016/j.tecto.2014.02.017

Éditeur(s) : HAL CCSD Nature Publishing Group
Résumé : International audience
Mantle flow involves large strains of polymineral aggregates. The strongly anisotropic plastic response of each individual grain in the aggregate results from the interactions between neighbouring grains and the continuity of material displacement across the grain boundaries. Orthorhombic olivine, which is the dominant mineral phase of the Earth's upper mantle, does not exhibit enough slip systems to accommodate a general deformation state by intracrystalline slip without inducing damage. Here we show that a more general description of the deformation process that includes the motion of rotational defects referred to as disclinations can solve the olivine deformation paradox. We use high-resolution electron backscattering diffraction (EBSD) maps of deformed olivine aggregates to resolve the disclinations. The disclinations are found to decorate grain boundaries in olivine samples deformed experimentally and in nature. We present a disclination-based model of a high-angle tilt boundary in olivine, which demonstrates that an applied shear induces grain-boundary migration through disclination motion. This new approach clarifies grain-boundary-mediated plasticity in polycrystalline aggregates. By providing the missing mechanism for describing plastic flow in olivine, this work will permit multiscale modelling of the rheology of the upper mantle, from the atomic scale to the scale of the flow.
ISSN: 0028-0836

hal-01054315
https://hal.archives-ouvertes.fr/hal-01054315
DOI : 10.1038/nature13043

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The easternmost part of the Neoproterozoic Araçuaí belt comprises an anatectic domain that involves anatexites (the Carlos Chagas unit), leucogranites and migmatitic granulites that display a well-developed fabric. Microstructural observations support that the deformation occurred in the magmatic to submagmatic state. Structural mapping integrating field and anisotropy of magnetic susceptibility (AMS) revealed a complex, 3D structure. The northern domain displays gently dipping foliations bearing a NW-trending lineation, southward, the lineation trend progressively rotates to EW then SW and the foliation is gently folded. The eastern domain displays E-W and NE-SW trending foliations with moderate to steeply dips bearing a dominantly NS trending lineation. Magnetic mineralogy investigation suggests biotite as the main carrier of the magnetic susceptibility in the anatexites and ferromagnetic minerals in the granulites. Crystallographic preferred orientation (CPO) measurements using the electron backscatter diffraction (EBSD) technique suggest that the magnetic fabric comes from the crystalline anisotropy of biotite and feldspar grains, especially. The delineation of several structural domains with contrasted flow fabric suggests a 3D flow field involving westward thrusting orthogonal to the belt, northwestward orogen-oblique escape tectonics and NS orogen-parallel flow. This complex deformation pattern may be due to interplay of collision-driven and gravity-driven deformations.
ISSN: 0191-8141

hal-00903878
https://hal.archives-ouvertes.fr/hal-00903878
DOI : 10.1016/j.jsg.2013.08.001

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
Our ability to decipher the mechanisms behind metamorphic transformation processes depends in a major way on the extent to which crystallographic and microstructural information is transferred from one stage to another. Within the Leka Ophiolite Complex in the Central Norwegian Caledonides, prograde olivine veins that formed by dehydration of serpentinite veins in dunites exhibit a characteristic distribution of microstructures: The outer part of the veins comprises coarse-grained olivine that forms an unusual, brick-like microstructure. The inner part of the veins, surrounding a central fault, is composed of fine-grained olivine. Where the fault movement included a dilational component, optically clear, equant olivine occurs in the centre. Electron backscatter diffraction mapping reveals that the vein olivine has inherited its crystallographic preferred orientation (CPO) from the olivine in the porphyroclastic host rock; however, misorientation is weaker and associated to different rotation axes. We propose that prograde olivine grew epitaxially on relics of mantle olivine and thereby acquired its CPO. Growth towards pre-existing microfractures along which serpentinisation had occurred led to straight grain boundaries and a brick-like microstructure in the veins. When dehydration embrittlement induced slip, a strong strain localisation on discrete fault planes prevented distortion of the CPO due to cataclastic deformation; grain size reduction did not significantly modify the olivine CPO. This illustrates how a CPO can be preserved though an entire metamorphic cycle, including hydration, dehydration, and deformation processes, and that the CPO and the microstructures (e.g. grain shape) of one phase do not necessarily record the same event.
ISSN: 0010-7999

hal-01622643
https://hal.archives-ouvertes.fr/hal-01622643
DOI : 10.1007/s00410-017-1378-5

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
We present a new interpretation of anisotropy of magnetic susceptibility (AMS) fabrics in basaltic lava flows based on the detailed study of magnetic mineralogy and silicate crystallographic fabric of a Quaternary lava flow from the French Massif Central (La Palisse). We consider the model of AMS fabric imbrication between magnetic foliation and flow surface, as initially proposed for dykes. At the two sampling sites, the concordance between the flow direction deduced from the AMS foliation and that deduced from field observations indicates that the imbrication model could apply to the lava flows. However, the flow senses inferred fromAMSare systematically opposed between the two sampling sites suggesting permutations between K1 and K3 AMS axes, a configuration referred to as inverse fabric. Electron backscatter diffraction (EBSD) measurements show strong lattice-preferred orientations (LPO) for plagioclase, especially the (010) plagioclase plane, which tends to be parallel to the flow. Clinopyroxene LPO remains less marked than plagioclase LPO, whereas titanomagnetite does not display a significant LPO. Comparison between magnetic and crystallographic fabrics suggests that the AMS fabric of the lava flow results from the distribution of titanomagnetite grains, which is in turn controlled by the fabric of the silicate framework. Magnetic hysteresis parameters and anisotropy of remanent magnetization (ARM) measurements exclude a significant contribution from single-domain grains, often called upon to explain inverse magnetic fabrics. The origin of the observed inverse magnetic fabric may relate to the dip of the palaeosurface, which is the only remarkable difference between the two sampling sites. AMS appears as a good tool to determine the direction of basaltic lava flows and coupling with local crystallographic fabric data provides a valuable control of relationships between magnetic fabrics and flow and thus contributes to better constrain the AMS signature of lava flows.
ISSN: 0956-540X

hal-00903561
https://hal.archives-ouvertes.fr/hal-00903561
https://hal.archives-ouvertes.fr/hal-00903561/document
https://hal.archives-ouvertes.fr/hal-00903561/file/TB-GJI-193-2-Orig.pdf
DOI : 10.1093/gji/ggs115