Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Structural analysis along with 40Ar–39Ar and U–Pb datings in the Fuping massif provide new insight into the evolution of the eastern part of the Trans-North China Belt (North China Craton), from 2.7 Ga to 1.8 Ga. D1 is responsible for the development of a dome-and-basin structure coeval with crustal melting giving rise to migmatite and Nanying gneissic granites at 2.1 Ga. This dome-and-basin architecture resulted from the interference between a N–S compression of a weak ductile crust and gravity-driven vertical flow, in a high thermal regime. The next events involved flat lying ductile thrusting (D2) and normal faulting (D3) dated at around 1880 Ma and 1830 Ma, respectively. The D2 and D3 events belong to the Trans-North China Orogeny that results in the final amalgamation of the North China Craton. The D1 deformation is considered as evidence for an earlier orogen developed around 2.1 Ga prior to the Trans-North China Orogeny. The change in the deformation style between the 2.1 Ga and 1.8 Ga could be viewed as a consequence of the cooling of the continental crust in the North China Craton.
ISSN: 0191-8141

insu-00309553
https://hal-insu.archives-ouvertes.fr/insu-00309553
https://hal-insu.archives-ouvertes.fr/insu-00309553/document
https://hal-insu.archives-ouvertes.fr/insu-00309553/file/Trap-JStructuralGeology-2008.pdf
DOI : 10.1016/j.jsg.2008.05.001

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
In Western Mediterranean, the Rif belt in Morocco is part of the Gibraltar Arc built during the Tertiary in the framework of Eurasia-Africa convergence. The structural and metamorphic evolution of the internal units of this belt as well as their timing, crucial to constrain the geodynamic evolution of the Alboran Sea, is still largely debated.Our study on the Ceuta Peninsula (Northern Rif) provides new structural, petrological and geochronological data (U-Th-Pb, Ar-Ar), which allow to precise the tectono-metamorphic evolution of the Lower Sebtides metamorphic units with:(1) a syn-metamorphic thrusting event developed under granulite facies conditions (7–10 kbar and 780–820 °C). A major thrust zone, the Ceuta Shear Zone, drove the emplacement of metapelites and peridotitic lenses from the Ceuta Upper Unit over the orthogneisses of the Monte Hacho Lower Unit. This compressional event ended during the Upper Oligocene.(2) an extensional event developed at the boundary between amphibolite and greenschist facies conditions (400–550 °C and 1–3 kbar). During this event, the Ceuta Shear Zone has been reactivated as a normal fault. Normal ductile shear zones contributed to the final exhumation of the metamorphic units during the Early Miocene.We propose that the compressional event is related to the formation of an orogenic wedge located in the upper plate, in a backward position, of the subduction zone driving the geodynamic evolution of the Alboran domain. In this context, the episode of lithospheric thinning could be related to the opening of the Alboran basin in a back-arc position.Furthermore, unlike the previous models proposed for the Rif belt, the tectonic coupling between mantle peridotites and crustal metamorphic rocks occurred in Ceuta Peninsula at a depth of 20–30 km under high temperature conditions, before the extensional event, and thus cannot be related to the back-arc extension.
ISSN: 0040-1951

insu-01682810
https://hal-insu.archives-ouvertes.fr/insu-01682810
DOI : 10.1016/j.tecto.2017.11.028

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
After the January 12, 2010, Haiti earthquake, we deployed a mainly offshore temporary network of seismologic stations around the damaged area. The distribution of the recorded aftershocks, together with morphotectonic observations and mainshock analysis, allow us to constrain a complex fault pattern in the area. Almost all of the aftershocks have a N‐S compressive mechanism, and not the expected left‐lateral strike‐slip mechanism. A first‐order slip model of the mainshock shows a N264°E north‐dipping plane, with a major left‐lateral component and a strong reverse component. As the aftershock distribution is sub‐parallel and close to the Enriquillo fault, we assume that although the cause of the catastrophe was not a rupture along the Enriquillo fault, this fault had an important role as a mechanical boundary. The azimuth of the focal planes of the aftershocks are parallel to the north‐dipping faults of the Transhaitian Belt, which suggests a triggering of failure on these discontinuities. In the western part, the aftershock distribution reflects the triggering of slip on similar faults, and/or, alternatively, of the south‐dipping faults, such the Trois‐Baies submarine fault. These observations are in agreement with a model of an oblique collision of an indenter of the oceanic crust of the Southern Peninsula and the sedimentary wedge of the Transhaitian Belt: the rupture occurred on a wrench fault at the rheologic boundary on top of the under‐thrusting rigid oceanic block, whereas the aftershocks were the result of the relaxation on the hanging wall along pre‐existing discontinuities in the frontal part of the Transhaitian Belt.
ISSN: 0094-8276

insu-00643489
https://hal-insu.archives-ouvertes.fr/insu-00643489
https://hal-insu.archives-ouvertes.fr/insu-00643489/document
https://hal-insu.archives-ouvertes.fr/insu-00643489/file/GRL-haiti.2011.pdf
DOI : 10.1029/2011GL049799

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We review the geodynamic evolution of the Aegea-Anatolia region and discuss strain localisation there over geological times. From Late Eocene to Present, crustal deformation in the Aegean backarc has localised progressively during slab retreat. Extension started with the formation of the Rhodope Metamorphic Core Complex (Eocene) and migrated to the Cyclades and the northern Menderes massif (Oligocene and Miocene), accommodated by crustal-scale detachments and a first series of core complexes (MCCs). Extension then localised in Western Turkey, the Corinth Rift and the external Hellenic arc after Messinian times, while the North Anatolian Fault penetrated the Aegean Sea. Through time the direction and style of extension have not changed significantly except in terms of localisation. The contributions of progressive slab retreat and tearing, basal drag, extrusion tectonics and tectonic inheritance are discussed and we favour a model (1) where slab retreat is the main driving engine, (2) successive slab tearing episodes are the main causes of this stepwise strain localisation and (3) the inherited heterogeneity of the crust is a major factor for localising detachments. The continental crust has an inherited strong heterogeneity and crustal-scale contacts such as major thrust planes act as weak zones or as zones of contrast of resistance and viscosity that can localise later deformation. The dynamics of slabs at depth and the asthenospheric flow due to slab retreat also have influence strain localisation in the upper plate. Successive slab ruptures from the Middle Miocene to the Late Miocene have isolated a narrow stripe of lithosphere, still attached to the African lithosphere below Crete. The formation of the North Anatolian Fault is partly a consequence of this evolution. The extrusion of Anatolia and the Aegean extension are partly driven from below (asthenospheric flow) and from above (extrusion of a lid of rigid crust).
ISSN: 0040-1951

insu-00715950
https://hal-insu.archives-ouvertes.fr/insu-00715950
https://hal-insu.archives-ouvertes.fr/insu-00715950/document
https://hal-insu.archives-ouvertes.fr/insu-00715950/file/Jolivet-Aegean_Tectonophysics-2012.pdf
DOI : 10.1016/j.tecto.2012.06.011

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Tectonically controlled landforms develop morphologic features that provide useful markers to investigate crustal deformation and relief growth dynamics. In this paper, we present results of morphotectonic experiments obtained with an innovative approach combining tectonic and surface processes (erosion, transport, and sedimentation), coupled with accurate model monitoring techniques. This approach allows for a qualitative and quantitative analysis of landscape evolution in response to active deformation in the three end-member geological settings: compression, extension, and strike–slip.Experimental results outline first that experimental morphologies evolve significantly at a short time scale. Numerous morphologic markers form continuously, but their lifetime is generally short because erosion and sedimentation processes tend to destroy or bury them. For the compressional setting, the formation of terraces above an active thrust appears mainly controlled by narrowing and incision of the main channel through the uplifting hanging-wall and by avulsion of deposits on fan-like bodies. Terrace formation is irregular even under steady tectonic rates and erosional conditions. Terrace deformation analysis allows retrieving the growth history of the structure and the fault slip rate evolution. For the extensional setting, the dynamics of hanging-wall sedimentary filling appears to control the position of the base level, which in turn controls footwall erosion. Two phases of relief evolution can be evidenced: the first is a phase of relief growth, and the second is a phase of upstream propagation of topographic equilibrium that is reached first in the sedimentary basin. During the phase of relief growth, the formation of triangular facets occurs by degradation of the fault scarp, and their geometry (height) becomes stationary during the phase of upstream propagation of the topographic equilibrium. For the strike–slip setting, the complex morphology of the wrench zone, composed of several interacting fault segments, enhances the interactions with the drainage network. Because of the widening of the main fault zone toward the surface, a significant amount of distributed deformation is observed along the wrench zone. Locally, where two terminations of fault segments interact, less than a quarter of the far field displacement can remain measurable using fault offsets, leading to a systematic underestimation of the real fault slip rate.These different experimental examples illustrate the great potential of the approach coupling deformation mechanisms and erosion–transport–sedimentation processes to investigate qualitatively and quantitatively the morphotectonic evolution of tectonically controlled landscapes.
ISSN: 0169-555X

hal-01243587
https://hal.archives-ouvertes.fr/hal-01243587
DOI : 10.1016/j.geomorph.2015.02.011

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
The North Tehran Fault (NTF) is located at the southernmost piedmont of Central Alborz and crosses the northern suburbs of the Tehran metropolis and adjacent cities, where ∼15 million people live. Extending over a length of about 110 km, the NTF stands out as a major active fault and represents an important seismic hazard for the Iranian capital after historical seismicity. In order to characterize the activity of the NTF in terms of kinematics, magnitude and recurrence intervals of earthquakes, we carried out a first paleoseismological study of the fault within its central part between Tehran and Karaj cities. We opened a trench across a 3 m-high fault scarp affecting Quaternary deposits. Our study shows that the scarp is the result of repeated events along a main N115°E trending shallow dipping thrust fault, associated with secondary ruptures. From the trench analysis and Infrared Stimulated Luminescence (IRSL) dating of fault-related sediments, we interpreted between 6 and 7 surface-rupturing events that occurred during the past 30 kyrs. Their magnitudes (estimated from the displacements along the faults) are comprised between 6.1 and 7.2. The two last events - the largest - occurred during the past 7.9 ± 1.2 ka, which yields a Holocene slip rate of ∼0.3 mm/yr. The 7 earthquakes scenario suggests a regular periodicity with a mean recurrence interval of ∼3.8 kyrs. However, the two most recent events could correspond to the two largest historical earthquakes recorded in the area (in 312-280 B.C. and 1177 A.D.), and therefore suggest that the NTF activity is not regular.
ISSN: 0148-0227

hal-00757568
https://hal.archives-ouvertes.fr/hal-00757568
https://hal.archives-ouvertes.fr/hal-00757568v2/document
https://hal.archives-ouvertes.fr/hal-00757568/file/ritz2012.pdf
DOI : 10.1029/2012JB009147

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Parentis and Arzacq-Mauleon basins located in front of the V-shaped oceanic propagator in the Bay of Biscay present evidence for extreme crustal thinning. In this paper we investigate the 3D structure of these rift basins, based on field observations and the interpretation of seismic data. We compare these results with those obtained from two different and independent inversion methods: first a 3D gravity inversion and second the standard Euler deconvolution.;For the Mauleon Basin our results show that the positive gravimetric anomaly identified above its southern margin is the consequence of two shallower high density bodies that are separated by the Pamplona fault and a deeper high density body. The high density bodies can be explained by the presence of mid-crustal and mantle rocks that were exhumed or uplifted at shallower depth during Early Cretaceous rifting before they were reworked and integrated to the Pyrenean chain during compression phase. Also, during this reactivation phase, some slices of the exhumed mid-crustal and mantle rocks were sheared off and were integrated in the present-day thrust belt in the Mauleon basin. For the Parentis Basin we can demonstrate, based on seismic data and gravimetric inversion methods, a decrease in extension from west to east, which is compatible with the V-shape geometry of the overall basin. Along strike, a change in the fault geometry from downward concave top-basement detachment faults to upward concave high-angle faults can be observed eastwards, i.e. towards the termination of the basin. A key structure, controlling the evolution of the Parentis Basin, is the east-west trending Ibis fault. We interpret this fault to have initially formed as a strike slip fault before it was reactivated during later crustal thinning. At present, it forms the limit between an upper plate sag basin to the north and a lower plate sag basin, floored at least locally by a top-basement detachment faults to the south. The strong asymmetry of the basin is supported by the shape of the basin and the results of standard Euler deconvolution.
ISSN: 0040-1951

hal-00523444
https://hal.archives-ouvertes.fr/hal-00523444
DOI : 10.1016/j.tecto.2010.04.023

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
A network of 54 survey GPS sites, 28 continuous GPS stations and three absolute gravity (AG) observation sites have been set up in the Alborz mountain range to quantify the present-day kinematics of the range. Our results allow us to accurately estimate the motion of the South Caspian block (SCB) for the first time, and indicate rotation of the SCB relative to Eurasia, accounting for the left lateral motion in the Alborz range. In light of these new results, it clearly appears that deformation rates vary along the range, the eastern part accommodating mainly left lateral strike slip (2 mm yr(-1) south of the range and 5 mm yr(-1) north of the range) with a very low range normal shortening rate on the Khazar thrust fault (similar to 2 mm yr(-1)), and the western part accommodating range normal shortening (similar to 6 mm yr-1) on the Khazar thrust fault with a left lateral component of similar to 2 mm yr(-1) north of the range and 1 mm yr(-1) south of the range. These present-day kinematics agree with geomorphologic estimated slip rates, but not the long-term deformation, corroborating the idea that the kinematics of the range have changed recently due to the change of SCB motion.;Modelling of the interseismic deformation suggests a deep locking depth on the central-western segment of the Khazar fault (similar to 30 km) in agreement with the Baladeh earthquake rupture and aftershock ranging between 10 and 30 km. Given this unusual deep locking depth and the 34 degrees dip of the thrust, a large part of the Alborz range is located above the seismically coupled part of the fault. Based on our AG measurements this part of the range seems to uplift at a rate of 1-5 mm yr(-1), in agreement with terrace uplift.
ISSN: 0956-540X

hal-00617146
https://hal.archives-ouvertes.fr/hal-00617146
https://hal.archives-ouvertes.fr/hal-00617146v2/document
https://hal.archives-ouvertes.fr/hal-00617146/file/djamour2010.pdf
DOI : 10.1111/j.1365-246X.2010.04811.x

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The eastern margin of the Tibetan Plateau is a key region to understand the formation and tectonic evolution of the plateau. Most studies concentrated on the Longmen Shan range that corresponds to the tectonically very active boundary between the Tibetan Plateau and the Sichuan Basin. This work addresses the deformation and exhumation pattern in the poorly understood metamorphic Danba dome situated at the conjunction between the southern Longmen Shan range and the major strike-slip Xian Shui He fault. The Early Mesozoic and Cenozoic evolution of the dome are then compared to the regional evolution of eastern Tibet. The about 830 Ma zircon U–Pb ages obtained on the Gezong and Gongcai gneiss as well as U–Pb ages on inherited zircons in the Early Mesozoic granites confirm the occurrence of Neo-Proterozoic magmatic episodes in the Danba basement at 800–900 Ma and 650–750 Ma. Following the closure of the Palaeotethys Ocean, granitoids were emplaced in the Danba metamorphic basement and Triassic cover from about 230 Ma to about 170 Ma. The western part of the Lian He Kau granitic massif, emplaced (between 210 and 200 Ma) within the Triassic cover sequence of the dome was only slightly affected by the Early Mesozoic deformation. However, in the eastern, deeper level compartment of the massif, ductile deformation occurred between 200 and 190 Ma, contemporaneous with the onset of the Barrovian-type metamorphism dated at 200–180 Ma. That deformation is compatible with the Early Mesozoic deformation observed in the Longmen Shan range and with the development of the large-scale décollement level in the Songpan Garzê area. Apatite fission track data then indicate that, following the Oligocene–Middle Eocene onset of eastward motion of the Songpan Garzê terrane, the Danba dome developed as a crustal-scale antiform during the Late Miocene–Early Pliocene (10–4 Ma). The exhumation was controlled by the Lian He Kau fault (a major transpressive structure parallel to the Xian Shui He fault) and the associated Manai thrust faults. Regionally, while the Oligocene–Middle Miocene exhumation phase seems to have been of regional extent, the Late Miocene to Present day phase is localised along the Longmen Shan range thrusts as well as along the back-thrusts formed by the Lian He Kau, Manai and associated faults.
ISSN: 0743-9547

insu-01117657
https://hal-insu.archives-ouvertes.fr/insu-01117657
DOI : 10.1016/j.jseaes.2015.02.009

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Longmen Shan range is one of the major topographic and structural features of the easternmargin of the Tibetan Plateau. With an impressive topographic gradient and low convergence rates across the range this region has raised important questions concerning the dynamics of plateaumargin settings, such as the long-term mechanisms of topographic evolution. The investigation of the distribution in space and time of denudation can provide critical insight into such dynamics and shed light on still unresolved controversies. For that purpose, we present a new dataset that documents the intensity and distribution of denudation processes across this plateaumargin through field survey of fluvial incision markers, quantitative geomorphology and cosmogenic nuclide derived basin-wide erosion rates. Erosion is < 0.5 mm/year in the frontal region of the Longmen Shan and between 0.5 and 1 mm/year further west, with a gradual decrease when reaching the northern headwaters of the Min Jiang watershed, adjacent to the beginning of the Tibetan Plateau. The spatialdistribution of denudation inferred from the various methods we use suggests that most of the differential uplift in the Central Longmen Shan is accommodated by the Beichuan Fault and frontal structures located in the foothills. The denudation pattern seems also to reflect the large-scale propagation of erosion from the Sichuan Basin toward the Plateau. This suggests that the Longmen Shan range is submitted to the combined influences of slow thrusting activity on the frontal structures and progressive westward regressiveerosion as a probable response to a pulse of uplift of the Tibetan PlateauEasternmargin, that started 10 Ma ago.
ISSN: 0040-1951

hal-01564192
https://hal.archives-ouvertes.fr/hal-01564192
DOI : 10.1016/j.tecto.2009.10.026

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
[1] This article presents (U-Th)/He thermochronological data from the Longmen Shan belt, eastern Tibet. Located between the Songpan-Garze terrane and the Yangtze craton, this mountain range is one of the steepest margins of the Tibetan Plateau and an important area for the comprehension of the mechanisms that control the dynamics of such plateau borders in terms of spatial distribution of deformation or timing of topographic building. We describe several age-elevation transects and perform forward modeling of our data to derive quantitative information on the exhumation of the range. A major phase of exhumation started at 8–11 Ma, with an average rate of $0.65 mm a À1. Comparison of zircon and apatite ages indicates that the eastern part of the range may have experienced a significant decrease in exhumation since 2–3 Ma. We use the distribution of finite exhumation across the major faults of the area to quantify their dip-slip throw rate over the last 10 Ma. The Beichuan Fault, which was activated during the 2008 Sichuan earthquake, is the major active structure of the Longmen Shan since the late Miocene, with an average thrusting slip rate between 0.4 and 1 mm a À1. Conversely, over the same time period, only minor dip-slip activity occurred on the Wenchuan Fault Zone. This distribution in space and time of exhumation and deformation is discussed and compared to the different proposed models for the geodynamical evolution of the eastern Tibetan margin. It also provides an important long-term perspective to put in context the destructive 2008 Sichuan earthquake that struck the central Longmen Shan.
ISSN: 0278-7407

hal-01577059
https://hal-amu.archives-ouvertes.fr/hal-01577059
https://hal-amu.archives-ouvertes.fr/hal-01577059/document
https://hal-amu.archives-ouvertes.fr/hal-01577059/file/godard2009late.pdf
DOI : 10.1029/2008TC002407

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
Located east of Guadeloupe, the island of La Désirade exhibits the oldest rocks of the Lesser Antilles arc and the eastern Caribbean plate. An old magmatic basement is composed of (1) late Jurassic ophiolitic complex with meta-basaltic pillow lavas and interbedded radiolarites, (2) acid igneous complex comprising meta-quartz-diorite and meta-rhyolitic lavas flows, and (3) meta-diabasic/microdioritic dyke swarm complex. We present and discuss the discovery of synmetamorphic thrust tectonics in this island. Based on detailed structural analysis we evidenced two main compressive events. The first event (D1) is characterized by pervasive folding associated with thrust development. In the northeastern part of the island, a major thrust fault, the Grand Abaque Thrust, has been discovered which displaces for several kilometers the acid igneous complex onto the ophiolitic unit. The second deformation event (D2) is featured by a main pervasive cleavage S2 observed at the regional scale associated with upright folding (F2) and by the development of two sets of conjugated steeply dipping strike-slip shear zones, dextral 130°N and sinistral 20°N striking, respectively. Microstructural observations indicate that Greenschist facies metamorphism is clearly contemporaneous with the development of D1 and D2 superimposed tectonic structures. Ar/Ar geochronology was performed on two bulk of adularia minerals sampled in the northeast volcanic complex within a deformed zone related to a D2 event. These analyses yield well-defined and concordant plateau ages at 106.2 ± 1.7 Ma and 107.2 ± 1.8 Ma. Thus, shortening and thickening tectonics occurred during Lower Cretaceous (Albian). In the available framework of Caribbean geodynamics, the synmetamorphic thrust tectonics we discovered in the French Lesser Antilles is related to the collision between an Aptian-Albian oceanic plateau and the Andean-Cordilleran east-dipping subduction zone. Our results support subduction polarity reversal during Lower Cretaceous.
ISSN: 0278-7407

hal-00620555
https://hal.archives-ouvertes.fr/hal-00620555
DOI : 10.1029/2011TC002875

Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
The 2004 Aceh and 2005 Nias events are the two greatest earthquakes of the past 40 years with a total rupture of 1700 km long and a coseismic slip reaching up to 25 m. These two earthquakes have caused large stress perturbations which significantly altered seismic activity in the Sumatra-Andaman region. Using both detailed mapping of failure planes and various slip distributions, we calculate this stress change along the Sumatra-Andaman-Sagaing fault system from central Sumatra to southern Myanmar. The static Coulomb stress change Delta CFF and the observed seismic activity are in very good agreement with a Coulomb index similar to 20% greater than the one obtained for random events. Compared to previous studies, this high Coulomb Index confirms two important issues on the use of static stress change criterion: unsuited to study near-field aftershocks and only relevant for aftershocks analysis on large and mature faults at a time scale of several months. The calculated Delta CFF distribution suggests that the 2004 and 2005 earthquakes inhibit failure on the North Andaman rift and on the Sagaing fault, while failure is encouraged along the transform Andaman zone, the central Andaman rift, the West Andaman fault, the Sumatra fault system, and the offshore thrust faults west of Sumatra Island. The maximum value of similar to 15-20 bar (1.5-2 MPa) for Delta CFF is reached in the northern part of the Sumatra fault system. This high value together with the lack of major earthquake in the last 170 years result in a high seismic hazard for this region. Our results are also consistent with temporal evolution of both earthquakes' location and focal mechanism prior to and after the events. In particular, we explain the occurrence and the mechanism of seismic swarms observed in the central Andaman rift and along the west Andaman fault. Finally, our calculations reveal that the seismicity in the Andaman rift zone can only be explained if mu' > 0.5. This result leads to two end-member models: one with a constant and high fault friction and one with spatial variations, for which friction may depend on either the nature of the lithosphere (oceanic versus continental) or the fault type.
ISSN: 1525-2027

hal-00456027
https://hal.archives-ouvertes.fr/hal-00456027
DOI : 10.1029/2008GC002167

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
The strike-slip faults of north Tibet accommodate part of the Cenozoic convergence between India and Asia. Along the Karakax valley south of Yecheng and near the Xidatan trough south of Golmud, the active traces of the Altyn-Tagh and Kunlun faults follow narrow belts of metamorphic rocks. The deformation recorded in those mylonites is sinistral strike-slip. Rb/Sr and 40Ar/39Ar ages of deformation from syntectonic fabrics formed at 350–400°C 120 Ma. Argon loss suggests that deformation was associated to a 250–300°C thermal pulse that lasted 5–20 Ma after the onset of movement. Unroofing occurred much later, around 25 Ma when sudden cooling suggests a component of thrusting or more likely normal faulting. The Cretaceous shear may be related to collision between the Qiantang and the Lhasa blocks. The Karakax and Xidatan shear zones may have formed a unique, continuous boundary in the Cretaceous, which was later reused by the Tertiary strike-slip faults, leading to potentially calculable offsets along the Altyn-Tagh fault.
ISSN: 2169-9313

hal-00197562
https://hal.archives-ouvertes.fr/hal-00197562
https://hal.archives-ouvertes.fr/hal-00197562/document
https://hal.archives-ouvertes.fr/hal-00197562/file/Arnaud_JGR000904_def.pdf
DOI : 10.1029/2001JB000904

Éditeur(s) : HAL CCSD
Résumé : International audience
In the frame of the Africa-Europe convergence, the Mediterranean tectonic system presents a complex interaction between subduction rollback and upper-plate deformation during the Tertiary. The western Mediterranean is characterized by the exhumation of the largest subcontinental mantle massif worldwide (the Ronda Peridotite) and a narrow arcuate geometryacross the Gibraltar arc within the Betic-Rif belt (the internal part being called the Alboran domain), where the relationship between slab dynamics and surface tectonics is not well understood. New structural and geochronological data are used to argue for 1/ hyperstrechting of the continental lithosphere allowing extensional mantle exhumation to shallow depths, followed by 2/ lower miocene thrusting. Two Lower Miocene E-W-trending strike-slip corridors played a major role in the deformation pattern of the Alboran Domain, in which E-W dextral strike-slip faults, N60°-trending thrusts and N140°-trending normal faults developed simultaneously during dextral strike-slip simple shear. The inferred continuous westward translation of the Alboran Domain is accommodated by a major E-W-trending lateral ramp (strike-slip) and a N60°-trending frontal thrust. At lithosphere-scale, we interpret the observed deformation pattern as the upper-plate expression of a lateral slab tear and of its westward propagation since Lower Miocene. The crustal emplacement of the Ronda Peridotites occurred at the onset of this westward motion.The Miocene tectonics of the western Alboran is therefore marked by the inversion of a continental rift, triggered by shortening of the upper continental plate and accommodated by E-W dextral strike-slip corridors. During thrusting and westward displacement of the Alboran domain with respect to Iberia, the hot upper plate, which involved the previously exhumed sub-continental mantle, underwent fast cooling.
AGU Fall Meeting 2015
San Francisco, United States

insu-01242043
https://hal-insu.archives-ouvertes.fr/insu-01242043

Éditeur(s) : HAL CCSD
Résumé : In Taiwan , the subduction of the Chinese continental margin under the Luzon arc results in the progressive growth of an active orogenic wedge. It is one of the best places to study the complex relationships that occurs between the tectonic processes controlling deformation (plate rheology and kinematics, metamorphism and magmatism) and surface processes (erosion and sedimentation). In order to study the kinematics of the present day convergence of Philippine Sea plate to the Asian continent around Taiwan, we perform 2D and 3D sandbox modeling and we analyzed the models with PIV (Particle Image Velocimetry) software. In 2D experiments, a model Coulomb wedge is submitted to erosion and sedimentation under topography and flux steady state conditions. The 3D experiments are mainly used to study the escape tectonics occurring in the middle west and southwest Taiwan. A wedge shaped indenter and a basement relief were used to simulate the mechanical plate boundary between Philippine Sea plate and Eurasia plate and the basement topography to the west of Taiwan respectively. We examine the exhumation patterns, the mode of fault propagation and displacement patterns by strain partitioning of vertical vs. horizontal displacement and convergent parallel vs. orogen parallel components. The preliminary conclusions are: 1. The interactions between tectonics, erosion and sedimentation control geometry and kinematics of the doubly vergent transpressional orogen. 2. Exhumation processes are controlled by the balance between erosion, frontal accretion and underplating in different structural domains of the wedge. 3. Retrowedge erosion favorites backfolding and backthrusting, induces flower structures and fan shaped cleavage distribution. 4. Sedimentation promotes underplating and out-of sequences thrusting. 5. Continental subduction or subduction of topographic highs will enhance underthrusting/underplating, thick-skin tectonics and inversion of sedimentary basin.
Bolletino di Geofisica teorica ed applicata

hal-00411133
https://hal.archives-ouvertes.fr/hal-00411133

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The dating of the uplift onset of the Mongolian mountain ranges, the northernmost relief associated with the India-Eurasia convergence, is a fundamental issue to better understand the mechanisms of propagation of the Cenozoic transpressive deformation in Central Asia. Using apatite fission tracks we determined the timing and strain rates of the tectonics affecting the Gurvan Bogd system, in the Gobi-Altay, since the Middle Mesozoic to the Late Cenozoic. The region was firstly affected by a Lower-Middle Jurassic tectonic phase, characterized by a vertical crustal movement larger than 2 km. Then followed a protracted period without major crustal vertical movements until the last uplift phase. The peneplanation of the Jurassic relief produced an erosional surface that has undergone negligible denudation or sedimentation for more than 100 Ma. This same surface corresponds to the present summit plateaux of the massifs, standing about 2000 m above the surrounding region, which corresponds to the vertical movement produced by the ongoing uplift. Modelling of fission track data from the massifs of Ih Bogd and Baga Bogd shows that this uplift phase probably started at 5 ± 3 Ma. The Gobi-Altay mountain range appears therefore as one of the youngest mountain ranges in Central Asia, which is consistent with the idea of a northward propagation of the transpressional deformation from the Himalayan front to the Siberian craton. The Cenozoic uplift rate of the massifs is estimated to be between 0.25 and 1 mm/yr, which is slightly higher than the upper Pleistocene vertical slip rates of the bordering faults. This suggests that thrust faults observed within the massifs would increase the uplift rate inside the massifs compared to the uplift rate determined at their boundaries.
ISSN: 0012-821X

insu-00191116
https://hal-insu.archives-ouvertes.fr/insu-00191116
DOI : 10.1016/j.epsl.2007.04.047

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Field evidence for syn-deformation migmatization and crystallization along the Karakorum fault contradicts the study of Wang et al. (2012). The ages of such magmatic rocks provide minimum ages for the onset of deformation at similar to 23 Ma in North Ayilari and similar to 19 Ma in Tangtse. The onset of deformation at 12 Ma in the Ayilari range inferred by Wang et al. (2012) from a muscovite Ar/Ar age is a cooling age, thus only a minimum age. The similar to 60 Ma granodiorite bodies, the ophiolitic rocks and the south Kailash thrust that are correlated across the fault to provide a 52 +/- 2 km finite offset do not define reliable piercing points. Such observations as well as our previous work concur to show that the Karakorum fault initiated in the Oligo-Miocene, and has a long-term dextral slip-rate between 7.5 and 13 mm/yr, approximately twice that proposed by Wang et al. (2012).
ISSN: 0012-821X

hal-00829469
https://hal.archives-ouvertes.fr/hal-00829469
DOI : 10.1016/j.epsl.2012.12.012

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
The island of Taiwan is affected by intense seismic activity, which includes large events as the disastrous 1999 Chi-Chi earthquake. To improve seismic hazard assessment in this area, we estimate the effect of both interseismic loading and major events since 1736 on the state of stress of major active faults. We focus our approach on western Taiwan, which is the most densely populated part of Taiwan. We pay a specific attention to faults geometry and to both interseismic and coseismic slip distributions. Our results suggest that both earthquakes and interseismic loading before 1999 increase the Coulomb stress in the north-western part of the Chelungpu fault, a region which experienced the highest coseismic slip during the Chi-Chi earthquake. More importantly our results reveal a Coulomb stress increase in the southern part of the Changhua thrust fault, below a densely populated area.
ISSN: 0094-8276

hal-00475590
https://hal.archives-ouvertes.fr/hal-00475590
DOI : 10.1029/2009GL042292

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Mediterranean geodynamic system is an exceptional natural laboratory to study the complexities of back-arc extension during subduction rollback. Corsica is a key locality that recorded the Alpine subduction-collision history followed by 30 Ma of the Apennines slab rollback, responsible for the successive opening, from West to East, of the Liguro-Provençal basin and the Tyrrhenian Sea. The overall strain pattern of the Alpine metamorphic units of Alpine Corsica is studied through a synthesis of i) available geological maps, ii) geochronological data and iii) newly acquired structural data relative to successive events of ductile and brittle extension, Three main stages of extension are recorded: 1/ Syn-metamorphic Oligocene extension accommodated by N140° trending ductile shear zones, that correspond to the reactivation of a major Alpine thrust; 2/ Burdigalian ramp-flat extension with N60°-70° trending fault zones that controlled the deposition of onshore piggy-back basins (e.g. St Florent basin), and 3/ Serravalian N-S trending fault zones. From a geodynamical point of view, these successive extensional deformations in Alpine Corsica can be correlated to the history of the Apennines slab rollback. The two first stages are related to a southeastward rollback of the Appennines slab that successively triggered: 1/ Continental rifting in Oligocene leading to the opening of the Liguro-Provençal basin and 2/ Burdigalian extension with N60°-70° trending fault zone, oblique to the Alpine thrust that, after a counterclockwise rotation of the Corso-Sardinian block, became unable to accommodate extension. Finally, the third stage that gave NS-trending fault zones developed in Serravalian, at the onset of Tyrrhenian rifting, related to an eastward rollback of the Apennines slab, as a response of slab tearing in Sicily.
ISSN: 0040-1951

insu-01424859
https://hal-insu.archives-ouvertes.fr/insu-01424859
https://hal-insu.archives-ouvertes.fr/insu-01424859/document
https://hal-insu.archives-ouvertes.fr/insu-01424859/file/gueydan-tectonoph-2017.pdf
DOI : 10.1016/j.tecto.2016.12.028