Éditeur(s) : HAL CCSD
Résumé : International audience
Metamorphic soles correspond to m to 500m thick tectonic slices welded beneath most of the large-scale ophiolites.They typically show a steep inverted metamorphic structure where the pressure and temperature conditions ofcrystallization increase upward (from 500100ºC at 0.50.2 GPa to 800100ºC at 1.00.2 GPa), with isogradssubparallel to the contact with the overlying ophiolitic peridotite. The proportion of mafic rocks in metamorphicsoles also increases from the bottom (meta-sediments rich) to the top (approaching the ophiolite peridotites). Thesesoles are interpreted as the result of heat transfer from the incipient mantle wedge toward the nascent slab (associatedwith large-scale fluid transfer and possible shear heating) during the first My of intra-oceanic subduction(as indicated by radiometric ages). Metamorphic soles provide therefore major constraints on early subductiondynamics (i.e. thermal structure, fluid migration and rheology along the nascent slab interface).We present a detailed structural and petrological study of the metamorphic sole from 4 major cross-sections alongthe Oman ophiolite. We show precise pressure–temperature estimates obtained by pseudosection modelling andEBSD measurements performed on both the garnet-bearing and garnet-free high-grade sole. Results allow quantificationof the micro-scale deformation and highlight differences in pressure–temperature–deformation conditionsbetween the 4 different locations, showing that the inverted metamorphic gradient through the sole is not continuousin all locations.Based on these new constraints, we suggest a new tectonic–petrological model for the formation of metamorphicsoles below ophiolites. This model involves the stacking of several homogeneous slivers of oceanic crust leadingto the present-day structure of the sole. In this view, these thrusts are the result of rheological contrasts between thesole and the peridotite as the plate interface progressively cools down. These slivers later underwent several stagesof retrogression (partly mediated by ascending fluids from the slab) from amphibolite- to prehnite/pumpellite-faciesconditions.
Geophysical Research Abstracts
Vienne, Austria

insu-01309369
https://hal-insu.archives-ouvertes.fr/insu-01309369

Éditeur(s) : HAL CCSD
Résumé : International audience
The deformation of natural systems in response to subsurface water storage and redistribution provides insightsinto the main water flow path within heterogeneous systems, including the role of faults or fractures. A longbaseline tiltmeter was installed in the low-noise underground laboratory of Rustrel (LSBB) to study the responseof the Fontaine de Vaucluse (FDV) karst hydrosystem to water cycle. Tilt data and piezometric levels recorded in aborehole close to the LSBB show a strong correlation with the discharge of the system observed at the FDV spring30 km away. Over several months, tilt data were recorded on three base lines, thus allowing, for the first time,to study the tilt gradient variation that appears homogeneous. Such information provides a significant constrainton hydrological processes leading to the measured deformation. Several deformation models were tested usingthe ADELI code to estimate the type of hydro-mechanical structure that could reproduce the measured tilt andits gradient. On one hand, models show that uniform loading at the surface produces a much smaller signal thanobserved on measured data. On the other hand, the deformation related to the filling of a fracture following aprecipitation event requires unrealistic fracture size. Finally, we found that a suitable hydro-mechanical modelcorresponds to the loading of numerous fractures at the interface between the saturated and unsaturated zones. Sucha configuration predicts a tilt distribution in agreement with observations. This study suggests that tilt networksinto a karst system should provide key observation for deciphering hydrological processes
Geophysical Research Abstracts
Vienne, Austria

insu-01308594
https://hal-insu.archives-ouvertes.fr/insu-01308594

Éditeur(s) : HAL CCSD
Résumé : Biogenic volatile organic compound (BVOCs) emissions play an important role in regional air quality and global atmospheric chemistry. In addition, these natural VOC emissions serve important biological functions including attracting and repelling pollinators and herbivores. Some biological organisms use ambient air as a communication medium and the oxidation of these compounds brings about the concentration gradients sensed by insects and other organisms. Isoprene is the predominant BVOC emitted by vegetation and tropical forests are the dominant global source. This compound is very reactive in the atmosphere and contributes to the reactions that control tropospheric oxidant concentrations and thus the concentrations and lifetimes of longer-lived species. This paper presents a study on the seasonal variations in isoprene and some other significant BVOCs such as µ-pinene, µ-pinene, limonene, e-µ ocimene and longifolene, measured at the Guyaflux Tower located in a wet tropical forest in Paracou French Guiana (5o16´54´´N, 52o54´44´´W), during the year of 2011, using the Relaxed Eddy Accumulation technique at approximately 20 meters high above the canopy. The results show a lower concentration of isoprene during the month of February and March which correspond to the wet season with an average of 0,545 µg/m3 and 0,341 µg/m3, respectively followed by a slight increase in middle April (still wet season) and a higher concentration later in mid-June. The same behavior was observed for µ-pinene with higher concentrations for the same periods as isoprene however with a smaller increase. All the other compounds had concentrations below 1 µg/m3during the whole year: The monoterpene, e-µ ocimene, was observed and is known as a stress compound but the vegetation at the site did not face any known severe stress condition such as excessive drought or flooding. Concerning the fluxes, the results showed that just a small amount of BVOCs were deposited by wet or dry process and the majority of them were released in the atmosphere. Isoprene was by far the biogenic volatile organic compound with the highest concentration and flux, followed by alpha-pinene. The lowest concentration and flux rate for all the studied compounds was observed during the months of March and late July and beginning of August indicating a lower production of those BVOCs by vegetation during those periods. Previous limited studies in Amazonia and the Congo suggested that a higher concentration and flux rate of isoprene and µ-pinene should be expected during the dry season with lower emissions during the wet season, which is in relative agreement with what was observed at this tropical forest site in French Guiana. The exceptions were observed in April and June which correspond to a long wet period in which the concentration of isoprene and µ-pinene increased more than it was expected for this time of the year. The observations will be compared to output from the global chemistry transport model CAM-chem, which includes the MEGAN biogenic emissions model.
10th EGU General Assembly
vienne, Austria

hal-01204214
https://hal.archives-ouvertes.fr/hal-01204214
PRODINRA : 276525

Éditeur(s) : HAL CCSD
Résumé : International audience
The paper proposes a new knowledge discovery method called MAX-FLMin for extracting frequent patterns in social networks. Unlike traditional approaches that mainly focus on the network topological structure, the originality of our solution is its ability to exploit information both on the network structure and the attributes of nodes in order to elicit specific regularities that we call "Frequent Links". This kind of patterns provides relevant knowledge about the groups of nodes most connected within the network. First, we detail the method proposed to extract maximal frequent links from social networks. Second, we show how the extracted patterns are used to generate aggregated networks that represent the initial social network with more semantics. Qualitative and quantitative studies are conducted to evaluate the performances of our algorithm in various configurations.
Database (Weston, Conn.) and Expert Systems Applications
Vienna, Austria

hal-00767052
https://hal.archives-ouvertes.fr/hal-00767052
DOI : 10.1007/978-3-642-32600-4_35

Éditeur(s) : HAL CCSD
Résumé : EGU2012-6377- Geophysical Research Abstracts vol. 14
The hot geothermal fluid produced by the wells of the Bouillante power station, in Guadeloupe, contains various dissolved species such as silica or some metals (Zn, Pb, etc). During the exploitation, the geothermal fluid is flashing and cooling (from 260 to 160°C for the high-pressure steam-liquid separation and down to 110°C for the low-pressure phase separation of a part of the separated liquid at 160°C). Consequently, the dissolved species can form scale deposits such as amorphous silica or poly-metallic sulphides, according to the exploitation conditions, and cause serious scaling problems on the production and the surface installations. These minerals could also precipitate during the partial underground re-injection of the production fluids which is being set up in the Bouillante power station. In this study, in order to predict and prevent the possible silica precipitation at temperature lower than 160°C, during the partial underground reinjection of the production fluids of Bouillante or their thermal valorization down to 110°C temperatures, we propose to investigate on site the kinetics of silica precipitation as a function of temperature and pH. The experiments presented here were carried out on site on samples of separated waters collected after the steam-water separator at 160°C, containing about 600 ppm of SiO2, at four cooling temperatures: 22, 50, 75 and 90°C, and for pH ranging from 4 to 9. These experiments showed that the silica deposition was always initiated by a polymerization mechanism characterized by an order 2 kinetic law and the formation of a white colloidal gel, which slowed down the silica precipitation under solid form. This latter was observed much later, after the polymerization stage, and only in particular conditions (long time of atmospheric exposure, water stagnation,. . . ). The results also confirmed that the silica precipitation kinetics is strongly dependent on pH. In acidic solution, a transition period is observed before the beginning to the silica polymerization. At neutral-basic pH, there is no transition period and the rate of polymerization is maximal for pH close to 8. The undergoing modeling of these experimental data and specific surface area measurements on the colloidal gel will allow us to determinate the kinetics parameters useful for the prediction and prevention of silica precipitation under the specific exploitation conditions of Bouillante power station. This work is financially supported by ADEME (French Agency for Energy and Environment), BRGM and UAG.
EGU General Assembly 2012
Vienne, Austria

hal-00697627
https://hal-brgm.archives-ouvertes.fr/hal-00697627

Éditeur(s) : HAL CCSD
Résumé : International audience
Volumes of magma intruded in and emitted by volcanoes through time can be estimated by reconstruction of vol-cano's morphology and time sequence. Classical approaches for quantifying magma volumes on active volcanoes are based on the difference between pre-and post-eruption digital elevation models (DEM), but this kind of approach needs the pre-eruptive surfaces to be available. For old and eroded volcanoes these surfaces are poorly constrained. However, because the geometrical form of many volcanic edifices exhibits a remarkable symmetry we propose, here, a new approach using primary volcanic landforms in order to estimate the amount of the both erupted and eroded material and to locate eruptive centers. A large fraction of composite volcanoes have near constant slope on their flanks and a form that is concave upwards near their summits. But many phenomena can lead to non-symetrical edifices and complex morphologies can result, for example from parasitic centers of volcanism on the flanks, from alternation of short effusive and explosive construction phases, from flank or caldera collapses, or from glacial and other types of erosion. In this study we propose that, on the first order approximation, complex morphologies can be modeled by piling regular cones. In this model, cones centers and slopes are derived by fitting primary volcanic landform with a linear function :elevation=f(distance from center). Such an approach allows to estimate both errors on location of the eruptive center and on the volume of the resulting cones. This model can then be used for quantifying volume of erupted and eroded material, and for quantifying catastrophic events as giant landslides or flank collapse. This approach is tested on four different active volcanoes : Mount Mayon (Philippines), Mount Fuji (Japan), Mount Etna (Sicily) and Mount Teide (Canary Island) to estimate errors in volume between modeled and actual edifices. It is then used on volcanoes of La Réunion hotspot to reconstruct the Piton des Neiges and Piton de la Fournaise volcanoes at its different stages of growing.
EGU 2014
Vienna, Austria

hal-01386609
http://hal.univ-reunion.fr/hal-01386609

Éditeur(s) : HAL CCSD
Résumé : International audience
Understanding subduction rheology in both space and time has been a challenge since the advent of plate tectonics.We herein focus on "subduction infancy", which corresponds to the first 0-2 My immediately following subductionnucleation, when a newly born slab penetrates into the overriding plate mantle and heats up.The only remnants of this critical, yet elusive, geodynamic step are thin metamorphic soles, commonly found beneathpristine, 100-1000 km long portions of oceanic lithosphere emplaced on top of continents (i.e. ophiolites).In this study, we show how, during subduction infancy, transient mechanical properties of both the mantle and crustacross the subduction plate interface (during 100s ky) control and hinder the penetration of tectonic plates intothe mantle, and how this results in strong peaks of resistance and even slicing of their surface — leaving behindthin, chopped-off metamorphic slivers (i.e. metamorphic soles).These findings constrain the mechanical behaviour of the subduction plate interface (with implications for couplingprocesses and earthquake generation) as well as the properties of the crust and mantle. They also highlight the roleof fluids in enabling subduction to overcome this early resistance.
Geophysical Research Abstracts
Vienne, Austria

insu-01309386
https://hal-insu.archives-ouvertes.fr/insu-01309386

Éditeur(s) : HAL CCSD
Résumé : International audience
Aegean extension is a process driven by slab rollback that since 45 Ma shows a two-stage evolution. From 45 to13 Ma it is accommodated by localized deformation leading to i) the exhumation of high-pressure metamorphicrocks from mantle to crustal depths, ii) the exhumation of high-temperature rocks in core complexes and iii) thedeposition of Paleogene sedimentary basins. Since 13 Ma, extension is distributed over the whole Aegean domaingiving a widespread development of onshore and offshore Neogene sedimentary basins. The 3D reconstruction atAegean scale of this two-stage evolution shows that the rate of trench retreat was around 0.6 cm/y during the first30 My and then accelerated up to 3.2 cm/y during the last 13 My. Using available tomographic evidence, timingof metamorphic and sedimentary processes, paleomagnetic data and geometry and kinematics of deformation, wepropose that the sharp transition in trench retreat and deformation mode, localized vs distributed, at 13 Ma wascontrolled to slab tearing. Moreover, the development of dextral NE-SW strike-slip faults and related pull-apartbasins in the North Aegean domain, from the Cyclades to the Rhodope, strongly suggests that this sharp transitionalso corresponds to the onset of Anatolia westward escape.
Geophysical Research Abstracts
Vienne, Austria

insu-01137631
https://hal-insu.archives-ouvertes.fr/insu-01137631

Éditeur(s) : HAL CCSD
Résumé : International audience
The core of South East Asia is composed of a mosaic of continental blocks, among which the Indochina and theSouth China blocks (present day northern Vietnam), amalgamated during the Permian and/or the Triassic. LatePermian to Late Triassic geodynamic evolution of these two blocks remains controversial. The main discussionpoints concern the existence and the closure of an oceanic domain separating the Indochina and the South Chinablocks during this period. Especially, the polarity and the timing of the subduction zone that led to the collisionbetween the blocks as well as the present location of the suture delimiting them are a matter of debate. Despite thevaluable information they can provide, the sedimentary basins from northern Vietnam have been neglected in theprevious studies dealing with the geodynamic evolution of South East Asia.To determine the geodynamic evolution of the area, the basins of Sam Nua and Song Da, presently locatedin North Vietnam, have been investigated using a combined approach involving sedimentology, geochronology(U-Pb/zircon) and geochemistry (whole-rock major and trace elements composition of both volcanic and volcaniclasticrocks). The palaeoenvironment evolution, the main unconformities, their age and the tectonic affinitiesof the interbedded volcanic and volcaniclastics series have been characterized for these two basins. Our resultsdemonstrate (i) that the Song Da Basin exhibits a palaeogeographic affinity with the South China block, (ii) theoccurrence of extensive calk-alkaline volcanism and associated volcaniclastic deposits in the Sam Nua Basin,related to the existence of an active magmatic arc during the Early and the lower Middle Triassic, (iii) a Southdipping (present day coordinate) oceanic lithosphere beneath the Indochina block, deduced from the location ofthe magmatic arc south of the potential suture zones, (iv) that an angular unconformity postdates the lower MiddleTriassic volcaniclastic deposits in the Sam Nua basin. This unconformity, crosscutting the subduction relateddeposits, is interpreted as the result of the collision between the Indochina and the South China blocks.
European Geoscience Union General Assembly 2015
Vienne, Austria

insu-01137675
https://hal-insu.archives-ouvertes.fr/insu-01137675

Éditeur(s) : HAL CCSD
Résumé : International audience
Metamorphic soles correspond to m to 500 m thick highly strained metamorphic rock units found beneath myloniticbanded peridotites at the base of large-scale ophiolites, as exemplified in Oman. Metamorphic soles aremainly composed of metabasalts deriving from the downgoing oceanic lithosphere and metamorphosed up togranulite-facies conditions by heat transfer from the mantle wedge. Pressure–temperature peak conditions areusually estimated at 1.00.2 GPa and 800100ºC. The absence of HP–LT metamorphism overprint implies thatmetamorphic soles have been formed and exhumed during subduction infancy. In this view, metamorphic soleswere strongly deformed during their accretion to the mantle wedge (corresponding, now, to the base of the ophiolite).Therefore, metamorphic soles and banded peridotites are direct witnesses of the dynamics of early subductionzones, in terms of thermal structure, fluid migration and rheology evolution across the nascent slab interface.Based on fieldwork and EBSD analyses, we present a detailed (micro–) structural study performed on samplescoming from the Sumeini window, the better-preserved cross-section of the metamorphic sole of Oman. Largedifferences are found in the deformation (CPO, grain size, aspect ratio) of clinopyroxene, amphibole and plagioclase,related to mineralogical changes linked with the distance to the peridotite contact (e.g., hardening due to theappearance of garnet and clinopyroxene).To model the incipient slab interface in laboratory, we carried out 5 hydrostatic annealing and simple-shear experimentson Griggs solid-medium apparatus. Deformation experiments were conducted at axial strain rates of 10-6s-1. Fine-grained amphibolite was synthetized by adding 1 wt.% water to a (Mid-Ocean Ridge) basalt powder asa proxy for the metamorphic sole (amphibole + plagioclase + clinopyroxene garnet assemblage). To synthetizegarnet, 2 experiments were carried out in hydrostatic conditions and with deformation at 800C with confiningpressure of 2 GPa. Another simple-shear experiment has been carried out at 800C and 1 GPa with fined-grainednatural garnet. With the aim of mimicking the early slab interface (between the metamorphic sole and bandedperidotites at the base of the ophiolite), 2 simple-shear deformation experiments with 2 layers have been carriedout at 800C and confining pressure of 1 GPa. The bottom layer was made of hydrated basalt powder and the toplayer was made of olivine.Fined-grained garnet-free amphibolite is significantly weaker than dunite but the appearance of harder mineralsin the amphibolite (garnet and clinopyroxene) has major implications on its rheological evolution. These resultsallow liking field observations of strain localization at the interface to the metamorphic sole formation
European Geosciences Union General Assembly 2016
Vienne, Austria

insu-01309394
https://hal-insu.archives-ouvertes.fr/insu-01309394

Éditeur(s) : HAL CCSD
Résumé : International audience
Sub-continental lithospheric mantle rocks are exhumed at the foot of magma-poor distal passive margins as aresponse to extreme stretching of the continental crust during plate separation. Remnants of the Northern Iberianpaleo-passive margin are now exposed in the North-Pyrenean Zone (NPZ) and represent field analogues to studythe processes of continental crust thinning and subcontinental mantle exhumation. The NPZ results from theinversion of basins opened between the Iberia and Europa plates during Albo-Cenomanian times. In the westernNPZ, the ‘Chaînons Béarnais’ ranges display a fold-and-thrust structure involving the Mesozoic sedimentarycover, decoupled from its continental basement and associated with peridotite bodies in tectonic contact withPalaeozoic basement lenses of small size. Continental extension developed under hot thermal conditions, asdemonstrated by the syn-metamorphic Cretaceous ductile deformation affecting both the crustal basement and theallochthonous Mesozoic cover.In this study, we present structural and geochemical data providing constraints to reconstruct the evolution ofthe northern Iberia paleo-margin. Field work confirms that the pre-rift Mesozoic cover is intimately associatedto mantle rocks and to thin tectonic lenses of crustal basement. It also shows that the pre-rift cover was detachedfrom its bedrock at the Keuper evaporites level and was welded to mantle rocks during their exhumation atthe foot of the hyper-extended margin. The crust/mantle detachment fault is a major shear zone characterizedby anastomosed shear bands defining a plurimetric phacoidal fabric at the top of the serpentinized mantle. Thedetachment is marked by a layer of metasomatic rocks, locally 20 meters thick, made of talc-chlorite-pyrite-richrocks that developped under greenschist facies conditions. Raman Spectroscopy on Carbonaceous Materials(RSCM), performed on the Mesozoic cover reveal that the entire sedimentary pile underwent temperatures rangingbetween 200C and 480C.We show that: (i) at the site of mantle rocks exhumation, the boudinaged pre-rift sediments have undergone drasticsyn-metamorphic thinning with the genesis of a S0/S1 foliation and, (ii) the Paleozoic basement has been ductilelydeformed, into thin tectonic lenses that remained welded to the exhumed mantle rocks. Therefore the overallcrustal rheology appears dominated by shallow levels having a ductile behavior. This rheology is related to thepresence of a thick pre- and syn-rift decoupled cover acting as an efficient thermal blanket. This new geologicaldata set highlights important characteristics of ductile-type hyper-extended passive margin that cannot be obtainedfrom the study of seismic lines. Finally, we stress that studying field analogues represents a major tool to betterunderstand the mechanisms of extreme crustal thinning associated with mantle exhumation and their structuralinheritance during tectonic inversion.
Geophysical Research Abstracts
Vienne, Austria

insu-01510103
https://hal-insu.archives-ouvertes.fr/insu-01510103

Éditeur(s) : HAL CCSD
Résumé : International audience
The way faults control upward fluid flow in extensive hydrothermal systems without an abnormal heat source such as volcanic or plutonic activity is still unclear. In the Eastern Pyrénées, an alignment of 29 hot springs (from 29 • C to 73 • C) along the Têt normal Fault offers the opportunity to study this process. Using an integrated multi-scale geological approach including mapping, remote sensing, macro and microscopic analyses of fault zones, we show that hot springs locate close to high topographic reliefs related to fault throw and segmentation. Emergences are always in crystalline rocks at gneiss-metasediments contacts, mostly in the Têt Fault footwall. In more details, they localize either (1) in brittle fault damage zones at the intersection between the Têt Fault and subsidiary faults, and (2) into hercynian ductile faults where dissolution cavities run along shear zones. Using these observations and 2D preliminary numerical simulations, we propose a hydrogeological model of upward hydrothermal flow. Meteoric fluids infiltrate at high altitude in the fault footwall relief where they acquire temperature because of the geothermal gradient. Hydraulic gradient and buoyancy forces allow them to upflow along fault-related permeability anisotropies. The identification and prioritization of the features controlling this kind of system have important implications for geothermal exploration and for the understanding of fluid-flow into the brittle Earth's crust in general.
EGU 2017
Vienne, Austria

hal-01491096
https://hal-brgm.archives-ouvertes.fr/hal-01491096
https://hal-brgm.archives-ouvertes.fr/hal-01491096/document
https://hal-brgm.archives-ouvertes.fr/hal-01491096/file/EGU2017-Taillefer-etal_4996.pdf

Éditeur(s) : HAL CCSD
Résumé : International audience
The Transbaikal region extends over several hundreds of kilometres east of the Baikal Rift System. It is characterized by a number of sub-parallel Mesozoic grabens or half grabens generally filled with late Jurassic to Early Cretaceous clastic sediments interbedded with coal layers (1). Similar basins occur on an even larger area spanning from the Transbaikal region down to Korea implying a large-scale extensional process affecting most of the Amuria plate during the Mesozoic. In the Transbaikal region, the normal faults controlling the edges of the Mesozoic basins are generally superimposed to Palaeozoic ductile shear zones implying a strong localisation of the extensional deformation on inherited structures. Recent studies, associated to our own fieldwork demonstrated that some of the faults were again activated (2), still as extensional faults, during the Tertiary or Quaternary, and that some of them are presently active. The closure of the Mongol-Okhotsk ocean separating the Siberian plate from the Amurian block during the Mesozoic corresponds to a major event in the growth process of the East Asian continent. The oceanic suture zone is situated on the southern edge of the Transbaikal region and its roughly SW-NE direction is parallel to the basins (3). The timing of the closure of the Mongol-Okhotsk ocean is still highly debated: while sedimentological and tectonic data suggest that the oceanic closure and the following collision occurred in early Middle Jurassic (4), paleomagnetic studies advocate for a Early Cretaceous collision (5). Furthermore, several other questions remain on the localization, the size and the fate of the relief that most probably formed during the collision between the Amuria block and the Siberian craton. In order to answer those questions we used low temperature thermochronology data associated to tectonic, sedimentology and palinology to investigate the evolution of the Transbaikal grabens from Mesozoic to Present. Tectonic and thermochronology data provide evidences of exhumation and erosion along the eastern edge of the Siberian craton during the Middle Jurassic as well as a potential continuum of deformation between the Mesozoic extension and the initiation of the Baikal Rift System (6). Sedimentology and palinology reveals that the sediments deposited in the Transbaikal basin did not registered large-scale compressive deformation during or after their Late Jurassic - Early Cretaceous deposition and that they do not correspond to the dismantling of a strong compressive relief.
Geophysical Research Abstracts
Vienne, Austria

insu-00810487
https://hal-insu.archives-ouvertes.fr/insu-00810487

Éditeur(s) : HAL CCSD
Résumé : International audience
In the context of climate change, this study presents the ability of major/trace elements together with strontiumisotopes to trace back water paths at small scale and to deconvolve the geochemical signal of a small watershedsubject to intense flash floods episodes (Peyne, Hérault, France). Two small sub-basins draining distinct lithologiesin their heads (Plio-Villafranchian conglomerate versus Triassic gypsum-rich marls and dolomites) and the sameMiocene lithology downstream are investigated.Major elements and Ca/Na vs. Mg/Na ratios classically applied at large scale to distinguish carbonate from silicateweathering, allow here discriminating the three main lithologies from the two sub-basins. Trace elements Rband Sr coupled to calcium, also allow this lithological discrimination but in addition the Ca/Rb vs. Sr/Rb tracersappear to be much more discriminant for the various hydrological conditions. Thus, in combination with detailedlithological descriptions, they allow identifying the different facies that imprint the water signature through water-rock interaction according to the hydrological conditions.Strontium isotopes and Rb/Sr ratio, discriminate more precisely the drained lithologies of the 2 sub-basins. Firstly,the 87Sr/86Sr ratios allow identifying the nature of the lithologies and their main component(s) contributing to theSr budget in water and thus imprint the isotopic signature. Secondly, Sr isotopes evidenced two distinct Miocenefacies: the detritric faction (sandy marls), and the marine carbonates.The geochemical signatures of the brook samples draining both compartments were compared to the signatureof the Peyne River outlet just before the confluence into the Hérault River. It appears that the signature of thePeyne River, integrating all the water draining the basin, is relatively stable whatever the hydrological conditionsand mainly marked by the Miocene formations. Sr isotopes further highlight that this signature seems to resultfrom the mixing of both Miocene facies present in the lower part of the Peyne watershed, i.e. the sandy marls andthe carbonates. The typical signatures of the Plio-Villafanchian conglomerates and Triassic gypsiferous marls anddolomites of the headwaters of each sub-basin are completely hidden by the Miocene signatures. This should berelated to the large drainage area of the Miocene compared to other lithologies, despite the high solubility of thegypsum formations releasing large quantities of dissolved elements in solution.Understanding water paths at small scale is even more efficient when the geochemical approach is coupled with adetailed geological description. Indeed, the geochemical tracers are extremely dependent on the facies sequences(morphology) and of the soil nature (mineralogical composition), this is particularly sensitive at small scale.In the context of climate change increasing the intensity of rain events in the Mediterranean region, and resultingin catastrophic floods events (flash floods), tracing the origin of water contributing to the runoff is of primaryimportance and this must be investigated at small scale. Geochemical and isotopic fingerprinting thus constituteexcellent tools which can help to define the area of interest to be monitored in the framework of flood forecast andwarning networks
EGU General Assembly 2015
Vienne, Austria

hal-01118622
https://hal-brgm.archives-ouvertes.fr/hal-01118622

Éditeur(s) : HAL CCSD
Résumé : International audience
EGU General Assembly
Vienne, Austria

insu-01091969
https://hal-insu.archives-ouvertes.fr/insu-01091969

Éditeur(s) : HAL CCSD
Résumé : International audience
After the 2009 Morakot typhoon, which triggered numerous large landslides in Taiwan, Mouyen et al. (2013)showed for the first time the potential of time-lapse gravity survey to infer the mass of sediments transferringby landsliding or through rivers. By providing an integrated measurement of masses, gravimetry might thus becomplementary to common methods used to assess the sediments discharge of rivers. But the masses of rocksdisplaced by Morakot were exceptionally large as a result of the record-breaking rainfalls brought by this typhoonand one might wonder to what extent time-lapse gravimetry could record such sediment transfers. In order tobetter assess the capabilities of this method, we set a time-lapse gravity network dedicated to the monitoring ofsuch sediments transfers in Paolai village (south-central Taiwan). Paolai is located near the large Laonong riverwhere temporary alluvial deposits of sediments exist and face steep mountain slopes likely to experience landslides.Both features are considered as potential source of mass transfers, and in turn of temporal gravity changes. Thefirst base gravity measurements were done in November 2015, using absolute and relative gravimeters, and will berepeated every year, before and after the typhoon season. In the same time, we also use a terrestrial lidar to scan thegeometry of both the river and the mountain slopes, hence providing a detailed topographical survey of the studiedarea. Adding Lidar measurements is an efficient strategy to solve for the non-uniqueness of gravity solutions.Meanwhile, we use the Eros morphodynamic model, that combine landsliding and flooding models, to investigatevarious scenarios of landsliding and subsequent sediment transport and compute the gravity changes on a virtualnetwork of gravimeters. This gives us insights on the expected order of magnitudes for these surface sedimenttransfers, which are useful to unravel the induced gravity signal from others sources such as local hydrology orvertical ground displacements. The modeling results also enable us to set network location that are best defined todetect mass changes associated with sediment transfer. The main objective of this study is to test whether timelapsegravity brings a new and reliable information compared to present methods monitoring sediments transfersand landscape evolution.
European Geosciences Union General Assembly 2016
Vienne, Austria

insu-01308554
https://hal-insu.archives-ouvertes.fr/insu-01308554

Éditeur(s) : HAL CCSD
Résumé : International audience
The Corinth Rift is the most seismically active zone in Europe. The area is characterized by very localized NSextension at a rate of1.5cm/year, the occurrence of frequent and intensive microseismic crises and occasionalmoderate to large earthquakes like in 1995 (Mw=6.1).Since the year 2000, the Corinth Rift Laboratory (CRL, http://crlab.eu) consisting in a multidisciplinary naturalobservatory, aims at understanding the mechanics of faulting and earthquake nucleation in the Rift. Recent studieshave improved our view about fault geometry and mechanics within CRL, but there is still a critical need for a betterknowledge of the structure at depth both for the accuracy of earthquake locations and for mechanical interpretationof the seismicity.In this project, we aim to analyze the complete seismological database (13 years of recordings) of CRL by usingrecently developed methodologies of structural imaging, in order to determine at the same time and with highresolution, the local 3D structure and the earthquake locations.We perform an iterative joint determination of 3D velocity model and earthquake coordinates. In a first step, Pand S velocity models are determined using first arrival time tomography method proposed by Taillandier et al.(2009). It consists in the minimization of the cost function between observed and theoretical arrival times which isachieved by the steepest descent method (e.g. Tarantola 1987). This latter requires computing the gradient of thecost function by using the adjoint state method (Chavent 1974). In a second step, earthquakes are located in thenew velocity model with a non-linear inversion method based on a Bayesian formulation (Gesret et al. 2015). Step1 and 2 are repeated until the cost function no longer decreases.We present preliminary results consisting in: (1) the adjustement of a 1D velocity model that is used as initialmodel of the 3D tomography and (2) a first attempt of the joint determination of 3D velocity model and earthquakelocation.In addition to the tomographic imaging, we perform a preliminary receiver function analysis of teleseismic datarecorded by the broadband stations of the CRL network. The RF analysis should provide the interface depthsbeneath seismometers and increase the imaging resolution of the upper crustal structures provided by the 3Dtomography. In this first attempt, we adjust the 1D velocity model that produces a synthetic RF as similar aspossible to the observed RF for a subset of data. We compare the identified interfaces with structures imaged bythe tomography.
EGU general assembly 2016
Vienne, Austria

hal-01306224
https://hal-mines-paristech.archives-ouvertes.fr/hal-01306224

Éditeur(s) : HAL CCSD
Résumé : International audience
Geophysical Research Abstracts
Vienne, Austria

insu-00609966
https://hal-insu.archives-ouvertes.fr/insu-00609966

Éditeur(s) : HAL CCSD
Résumé : International audience
Sedimentary basins, through the sedimentary successions and the nature of the deposits, reflect the geology of thearea from which the sediments were derived and thus provide valuable record of hinterland tectonism. As the collisionbetween the South China and the Indochina blocks (i.e. the Indosinian orogeny) is still the object of a numberof controversies regarding, for instance, its timing and the polarity of the subduction, the sedimentary basins associatedwith this mountain belt are likely to provide clues to reconstruct its geodynamic evolution. However, boththe Sam Nua Basin (located to the south of the inner zones of the Indosinian orogeny and the Song Ma ophiolites)and the Song Da Basin (located to the north of the inner zones), northern Vietnam, are still lacking importantinformation regarding the depositional environments and the ages of the main formations that they contain.Using sedimentological and dating analyses (foraminifers biostratigraphy and U-Pb dating on detrital zircon), weprovide a new stratigraphic framework for these basins and propose a geodynamic evolution of the present-daynorthern Vietnam.During the Early Triassic, the Sam Nua Basin was mainly supplied by volcaniclastic sediments originating froman active volcanic activity. Geochemical investigations, combined with sedimentological and structural analyses,support an arc-related setting for this magmatism. This magmatic arc resulted from the subduction of a south dippingoceanic slab that once separated the South China from the Indochina blocks. During the Middle to the LateTriassic, the Sam Nua Basin underwent erosion that lead to the formation of a major unconformity, termed theIndosinian unconformity. This unconformity is interpreted to result from the erosion of the Indosinian mountainbelt, built after the continental collision between the South China and the Indochina blocks. Later, during the LateTriassic, the Sam Nua Basin experienced the deposition of very coarse material, emplaced under continental settingand representing the product of the erosion of the Indosinian mountain belt.To the North, the Song Da Basin is characterized by strongly diachronous deposits over a basal unconformitydeveloped at the expense of volcanic and volcaniclastic deposits related to the Emeishan Large Igneous Province.The sedimentary succession indicates a foreland setting during the Early to the Middle Triassic, which contrastswith the commonly assumed rift setting for these sediments. Thus, the Song Da Basin documents the formation ofthe Indosinian thrust belt, located immediately to the South of the basin.
European Geosciences Union General Assembly 2017
Vienne, Austria

insu-01510331
https://hal-insu.archives-ouvertes.fr/insu-01510331

Éditeur(s) : HAL CCSD
Résumé : International audience
The « METYSS » cruise was carried out in June 2009 onboard the R/V « Téthys II » along the eastern Sardinian and south-eastern Corsican margins, western Tyrrhenian Sea, in order to better constrain the potential links between deformation related to either crustal tectonics or salt tectonics and sediment accumulation, especially during the Messinian and Plio-Quaternary times. We acquired 15 high-resolution seismic reflection profiles (about 1200 km in cumulative length) along the south-eastern Corsican margin, immediately north of the Bonifacio Strait and along the upper and middle parts of the eastern Sardinian margin, from the continental slope to the Cornaglia Terrace. The Tyrrhenian Sea is considered as a Neogene back-arc basin that opened during continental rifting and oceanic spreading related to the eastward migration of the Apennine subduction system from Tortonian to Pliocene times (Jolivet et al., 2006). Rifting of the Tyrrhenian Sea started first along the Eastern Sardinian margin during the Tortonian-Messinian times and therefore the series of that age should be considered as syn-rift sediments (Sartori et al., 2004). The « METYSS » seismic profiles clearly illustrate that this part of the Tyrrhenian was highly segmented during the rifting stage by N-S trending normal faults delineating ridges (e.g., Baronie Ridge) and basins (e.g., Sardinian Basin and Cornaglia Terrace), as previously described for example by Thommeret (1999) and Sartori et al. (2004). The Messinian sedimentary units and especially the « Upper Unit » (UU, Lofi et al., this congress, corresponding to the « Upper Evaporites » in the previous literature) are, without any doubt, of syn-rift age, as they display a fan-shaped stratal geometry. The Mobile Unit (MU, Lofi et al., this congress), i.e. the Messinian halite, is clearly imaged in the study area and its spatial repartition can be outlined. The highly-variable thickness of the confined salt basins could be due to the initial basin geometry (i.e. before the Messinian salinity Crisis) or to the syn-rift character of the deposition. Southeastward of the study area, in the vicinity of the Cornaglia Seamount, salt tectonics appears surprisingly vigorous. More surprisingly, several normal faults seem to have remained active in recent times, if not even at present time. Fault slip has been recorded by bathymetric scarps and associated footwall debris flows interfingered within the Plio-Quaternary sequence, even though the eastern Sardinian margin is usually considered to be passive now. Moreover, some amount of tectonic inversion is visible on some normal faults that show contractional or transpressional components of late slip. In addition, this “post-rift” deformation can be illustrated within the Plio-Quaternary sequence by a regional unconformity. Consequently, numerous mass-transport deposits and channel-levees systems observed in the Plio-Quaternary cover could be partly controlled by tectonic activity. These very preliminary results require further investigations in order to better decipher the role of crustal tectonics and salt tectonics, salt-related structures being very efficient markers to discriminate between the respective contribution of gravity-driven, salt tectonics and deep-seated, crustal tectonics (Gaullier et al., 2010). Finally, we aim to precisely determine the relative vertical movements (tilting, subsidence, magmatism. . . ) and geodynamical history of the different segments of the area since 6 Ma.
Geophysical Research Abstracts
Vienne, Austria

hal-00537828
https://hal-brgm.archives-ouvertes.fr/hal-00537828
https://hal-brgm.archives-ouvertes.fr/hal-00537828/document
https://hal-brgm.archives-ouvertes.fr/hal-00537828/file/EGU2010-15469_ref6821.pdf