Éditeur(s) : Elsevier
Résumé : In situ microbialites occurring in reef rocks dredged between 80 and 130 in water depth on the modern fore-reef slopes of Tahiti and the Marquesas islands yield ages ranging from 17,100 2900 to 4410 2250 years BP, suggesting that they played a prominent role during the last deglacial sea level rise. Microbialites developed in both shallow and deep water depositional environments where they characterize various zones of the reef tracts (reef crests, upper reef slopes, deep fore-reef slopes), reflecting contrasting scenarios of microbialite development involving ''reefal microbialites'' in shallow-water settings and ''slope microbialites'' that formed in environments deeper than 1020 in and extending down to more than 100 m. Reefal microbialites correspond to a late stage of encrustation of the dead parts of coral colonies, or more commonly, of related encrusting organisms (red algae and foraminifers), thus forming surface crusts. Slope microbialites generally form the ultimate stage of a biological succession indicating a deepening sequence, whereby shallow water corals and associated encrusting organisms are replaced by deeper water assemblages of red algae and foraminifers before microbialite growth. The precipitation of phosphatic-iron-manganese crusts and the deposition of planktonic micritic limestones on the microbialites characterize a deepening-upward sequence. The widespread development of microbialites in reef sequences from the Last Deglaciation characterizes a period of environmental degradation consequential oil the rapid sea-level rise and abrupt climatic changes of that time. The reported biological succession reflects changes in water quality, and especially an increase in nutrients. In shallow-water settings, increased alkalinity and nutrient availability in interstitial waters were related to surface fluxes and terrestrial groundwater seepage while slope environments were exposed to continuous upwelling of nutrient-rich deeper waters during the last deglacial sea level rise. The age differences between corals and overlying slope microbialites range from 1600 to 8400 years, based on high-precision U-series age measurements of both corals and microbialites, and indicates that a significant time (several thousand years) elapsed between the development of the coralgal frameworks and the growth of slope microbialite crusts. Microbialites cannot be considered as part of the drowning event some 14,000 years ago that resulted in the demise of reef frameworks in the 90-110 m present depth range, but are Substantially younger. (c) 2006 Elsevier B.V. All rights reserved.
Sedimentary Geology (0037-0738) (Elsevier), 2006-03 , Vol. 185 , N. 3-4 , P. 277-295

Droits : 2006 Elsevier B.V. All rights reserved.
http://archimer.ifremer.fr/doc/2006/publication-4204.pdf
DOI:10.1016/j.sedgeo.2005.12.018
http://archimer.ifremer.fr/doc/00000/4204/

Éditeur(s) : HAL CCSD Society of Exploration Geophysicists
Résumé : low frequency seismic attenuation
International audience
The study of wave attenuation in partially saturated porous rocks over a broad frequency range provides valuable information about the fluid system of reservoirs, which are inherently multiple phase fluid system. Until now, not much laboratory data have been collected in the seismically relevant low frequency range and existing literature data on partially saturated rock are very limited. The main goal of our work is to experimentally measure the bulk seismic attenuation on fluid-bearing rocks, using natural rock samples in an efficient way at in situ conditions. We are currently fine-tuning our attenuation measurement prototype. Preliminary bench-top results are promising and show consistency with reported experimental data with dry, partially and fully fluid saturated rocks. Measurements with the machine are accurate and precise.
ISSN: 1052-3812

hal-00564863
https://hal.archives-ouvertes.fr/hal-00564863
DOI : 10.1190/1.3513397

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
ODP (Ocean Drilling Program)/IODP (Integrated Ocean Drilling Program) Site 1256 is located on the Cocos Plate in the Eastern Equatorial Pacific Ocean, in a 15 Ma old oceanic lithosphere formed at the EPR during a period of superfast spreading (>200 mm/yr). ODP/IODP Hole 1256D reached for the first time the contact between sheeted dikes and underlying gabbros. It consequently offers a unique opportunity to study in situ, in present-day oceanic crust, the root zone of the sheeted dike complex. This root zone is a thin, 100 m thick boundary layer between the magmatic system (i.e., the axial melt lens, similar to 1100 degrees C), and the overlying high temperature hydrothermal system (<= 450 degrees C). The understanding of interactions within this boundary layer is critical to that of crustal processes along mid-ocean ridges.;This work focuses on the petrophysical characterization of the root zone of the sheeted dike complex in order to further constrain the hydrothermal circulation system in the vicinity of the axial melt lens, as recorded in non-granoblastic dikes, granoblastic dikes, and varitextured gabbros. The petrophysical properties were determined from sample measurements in the laboratory and were compared to in situ downhole geophysical probing. The porosity structure is bipolar, depending on lithology, resulting in a layered system. Non-granoblastic dikes are generally altered in the greenschist fades (similar to>250 degrees C) with relatively high and interconnected (cementation index m similar to 1.72, electrical tortuosity tau similar to 28.3) porosity (1.5%). In contrast, gabbros are retrogressively metamorphosed in the amphibolite (similar to>450 degrees C) and greenschist facies, with lower porosity (1.3%) that involves numerous fissures and cracks, resulting in a more connected medium (m similar to 1.58, tau similar to 11.8) than non-granoblastic dikes. These cracks are more abundant but also tend to close with increasing depth as indicated in downhole geophysical data. Porosity and alteration, as viewed from surface electrical conductivity, appear to be directly correlated.
ISSN: 0040-1951

hal-00544556
https://hal.archives-ouvertes.fr/hal-00544556
DOI : 10.1016/j.tecto.2010.07.013

Éditeur(s) : HAL CCSD Elsevier
Résumé : This paper is the first presentation of a project called GHYRAF (Gravity and Hydrology in Africa) devoted to the detailed comparison between models and multidisciplinary observations (ground and satellite gravity, geodesy, hydrology, meteorology) of the variations of water storage in Africa from the Sahara and part to the monsoon equatorial part. We describe the various actions planned in this project. We first detail the actions planned in gravimetry which consist in two main surface gravity experiments: on the one hand the periodic repetition of absolute gravity measurements along a north-south monsoonal gradient of rainfall in West Africa, going from Tamanrasset (20 mm/year) in southern Algeria to Djougou (1200 mm/year) in central Benin; on the other hand the continuous measurements at Djougou (Benin) with a superconducting gravimeter to monitor with a higher sampling rate the gravity changes related to an extreme hydrological cycle. Another section describes the actions planned in GPS which will maintain and develop the present-day existing network in West Africa. The third type of actions deals with hydrology and we review the three sites that will be investigated in this joint hydrogeophysics project namely Wankama (near Niamey) and Bagara (near Diffa) in the Niger Sahelian zone and Nalohou (near Djougou) in the Benin monsoon zone. We also address the question of the ground truth of satellite-derived missions: in this context the GHYRAF project will lead to test the hydrology models by comparison both with in situ and satellite data such as GRACE, as well as to an important increase of our knowledge of the seasonal water cycle in Africa. We finally present preliminary results in GPS based on the analysis of the vertical motion of the Djougou site. The resulting absolute gravity changes related to the 2008 monsoon are finally given.
ISSN: 0264-3707

hal-00475660
https://hal.archives-ouvertes.fr/hal-00475660
DOI : 10.1016/j.jog.2009.09.014

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Large organic falls to the benthic environment, such as dead wood or whale bones, harbour organisms relying on sulfide-oxidizing symbionts. Nothing is known however, concerning sulfide enrichment at the wood surface and its relation to wood colonization by sulfide-oxidizing symbiotic organisms. In this study we combined in situ hydrogen sulfide and pH measurements on sunken wood, with associated fauna microscopy analyses in a tropical mangrove swamp. This shallow environment is known to harbour thiotrophic symbioses and is also abundantly supplied with sunken wood. A significant sulfide enrichment at the wood surface was revealed. A 72 h sequence of measurements emphasized the wide fluctuation of sulfide levels (0.1->100 lM) over time with both a tidal influence and rapid fluctuations. Protozoans observed on the wood surface were similar to Zoothamnium niveum and to vorticellids. Our SEM observations revealed their association with ectosymbiotic bacteria, which are likely to be sulfide- oxidizers. These results support the idea that sunken wood surfaces constitute an environment suitable for sulfide-oxidizing symbioses.
ISSN: 0141-1136

hal-00751649
https://hal.univ-antilles.fr/hal-00751649

Éditeur(s) : HAL CCSD Elsevier
Résumé : The Gulf of Aigues-Mortes (NW Mediterranean Sea) is a midshelf zone whose scale is an intermediate between the nearshore scale (0–10 m depth) and the coastal scale (including the whole continental shelf). Its hydrodynamics is investigated for the first time. ADCP, CTD and thermosalinograph data were collected during three short cruises (HYGAM; March 6–7, 20–21, April 5–6, 2005). They were scheduled approximately every 15 days to sample the gulf circulation under different weather conditions. Moreover, the cruise data were used to validate the Symphonie model, a 3D primitive equations circulation model. The circulation features displayed by in situ data were well reproduced by Symphonie. A downscaling modelling approach was implemented, the largest scale being obtained by the replay of the MFSTEP regional model of the North-Western Mediterranean Sea. The analysis, closely coupling in situ measurements and model results, provides information that would not have been obtained using data separately. The great variability of the oceanic circulation at this scale is well evidenced. Winds are the main forces, not only locally but also at a larger scale. North winds generate coherent structures interacting with the general Mediterranean circulation. The explanation of the induced currents is then not straightforward, some of them being, for example, northward. South and southeast winds reinforce the sloping surface, the latter allowing the geostrophic equilibrium with longshore currents. This study, focused on the end of winter 2004–2005, also enhances the heat fluxes from offshore to nearshore, as well as the initiation of shelf dense waters. The knowledge of the midshelf oceanic circulation is then applied to run a numerical experiment which describes both the dispersion of a fictive contaminant from a point S (at the centre of the GAM), and evaluates the risk of contamination of the beaches along the GAM shores.
ISSN: 0278-4343

hal-00196620
https://hal.archives-ouvertes.fr/hal-00196620
DOI : 10.1016/j.csr.2007.06.006

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Two in situ concrete/claystone interfaces were sampled at the laboratory level in the Andra Meuse/Haute Marne (France) Underground Research Laboratory (URL) in order to study five years of interactions between Callovian-Oxfordian (COx) claystone and two cementitious materials (concrete bottom slab and shotcrete on the walls of the main gallery), with a specific focus on sulfur. Combined mineralogical, chemical and sulfur isotopic investigations were carried out to define the degree of the perturbation of the sulfur system in the claystone and in both the cementitious materials. At both interfaces, results show that the main perturbation on the claystone side is the formation of scarce μm-sized gypsum, the sulfur content of which is essentially derived from pyrite oxidation. The distribution of gypsum is highly correlated with the fissure network of the damaged zone due to excavation of the gallery. Its presence is also often associated with a loss of cohesion of the concrete/claystone interface. Due to the small amounts of gypsum and its μm-size, measurements were performed by ion microprobe. Adaptations were needed on account of the reactivity of gypsum and sulfates in general under the beam. The use of ion microprobe analysis provided evidence of high local isotopic heterogeneity that could be attributed to kinetic fractionation effects. Some analyses suggest a minor contribution of dissolved sulfates in pore water of claystone and possibly of concrete. The perturbation on the concrete side is marked by a significant increase in the bulk sulfur content within three millimeters of the interface with the claystone, showing a sulfur gradient from claystone to concrete. The main objective of this work was to define the extent of the chemical and mineralogical perturbations, taking into account in situ URL conditions, i.e. hydrodynamic conditions (shotcrete sprayed on the gallery walls and subjected to ventilation of the galleries), damaged zone of claystone induced by excavation and multi-scale heterogeneity. This identifies the relevant parameters to better constrain predictive reactive transport models of concrete/claystone interactions at a realistic scale.
ISSN: 0079-1946

hal-01055790
https://hal-brgm.archives-ouvertes.fr/hal-01055790
DOI : 10.1016/j.pce.2014.01.003

Éditeur(s) : Universite Montpellier II
Résumé : Since 1980, the expansion of a green macro-alga: Valonia aegagropila (C Agardh) is observed in Salses-Leucate lagoon (France). It is currently distributed in the north of the lagoon with important biomasses (40 gDW/m²) eroding the cover of Zostera noltii. The free form of the alga can be transported with the surface or bottom currents depending on seasons. It multiplies mainly by vegetative reproduction. There are few studies on the ecophysiological capacities of V. aegagropila. This work tries to answer why (physiological adaptation) and how (mechanical process of transport) the alga invaded the lagoon, with an approach including observations, experiments in controlled environment and biological and hydrodynamic models. The growth capacities depend on temperature and light intensities, the nutrients absorption rates and internal nitrogen and phosphorus internal quotas were measured and modelled using a Droop model based on internal quota. Vertically transport was studied with laboratory experiments and measurements of biomass transport were made into the lagoon. The biological model (growth, vertical transport, mortality) was coupled to the MARS 3D hydrodynamic model with a meshgrid of 160m. The results show an adaptation of the alga to low availability of phosphorus and an annual growth of biomass controlled by the availability of nutrient during winter. The alga seems to occupy the whole zones where growth is optimal and the risk of invasion of the southern part of the lagoon is limited. This work opens on research prospects on an ecological model (confronting physiological capacities and competition of V. aegagropila, Zostera noltii, green algae and primary production), new physiological experiments, ecological observations and potential valorisation of V. aegagropila.
Depuis 1980, est observée dans l'étang de Salses-Leucate l'expansion d'une macro-algue verte : Valonia aegagropila (C. Agardh). En 2004, elle était présente sur la presque totalité de la moitié nord de la lagune avec des biomasses importantes (jusqu'à 600 gPS/m²). L'algue envahit et érode également la couverture d'herbiers garant de la biodiversité, de la productivité et de la stabilité de l'écosystème. V. aegagropila se reproduit essentiellement de manière végétative (fragmentation des thalles) et possède la particularité de retenir de l'oxygène de la photosynthèse dans sa structure sphérique. Cet oxygène piégé lui donne la possibilité de mouvement sur la verticale et d'être transportée dans le domaine par les courants. Les conditions physico-chimiques de l'étang présentent de fortes variations saisonnières en salinité, en température et en turbidité, ainsi que des apports nutritifs faibles : la production primaire est principalement limitée par le phosphore. Il existe malheureusement peu d'informations sur V. aegagropila ainsi que trop peu de connaissances sur son écophysiologie. Elle semble vivre dans des milieux plutôt oligotrophe dans des régions tropicales à sub-tropicales. Ce travail basé sur une approche d'observations de terrain, d'expérimentations en milieu contrôlé (en laboratoire) et de modélisation des processus, a permis d'une part d'explorer les capacités adaptatives physiologiques de V. aegagropila aux conditions environnementales de l'étang et d'autre part de mettre à jour les modes de fonctionnement de la dynamique spatio-temporelle de la population. Les capacités de croissance ont été mesurées sur un large spectre de température et de lumière. Les capacités d'absorption des sels nutritifs dans l'eau et les facultés de l'algue à stocker l'azote et le phosphore dans ses tissus ont également été étudiées. D'autre part, un modèle de dynamique des populations a été conceptualisé puis développé. Les processus pris en compte dans ce modèle sont la croissance de l'algue (modèle à quota interne), la flottabilité de l'algue et la mortalité par surdensité. Ces processus ont été paramétrés en majeure partie par des expérimentations réalisées en laboratoire. Ce modèle 0D a par la suite était couplé au modèle hydrodynamique MARS3D (modèle Ifremer) mis en place sur la lagune de Salses-Leucate, utilisant deux grilles de calcul (160m ou de 80m de résolution). Les simulations réalisées permettent d'appréhender les capacités spatio-temporelles de la croissance de l'algue dans l'étang, le turnover annuel de la biomasse totale et les attracteurs de biomasse du système sous différents évènements météorologiques. Ces résultats sont comparés avec les répartitions cartographiques de la population observées in situ en 1999 et 2004 et des flux de biomasses mesurés au cours d'observations de terrain entre juin 2003 et septembre 2004. L'ensemble des résultats montre d'une part une adaptation de l'algue à évoluer dans un milieu pauvre en phosphore et d'autre part une croissance annuelle de la biomasse totale qui est principalement contrôlée par les apports hivernaux en sels nutritifs dans la lagune. Les résultats des simulations montrent également que V. aegagropila semble occuper à présent la majeure partie des zones favorables à sa croissance. Il est également montré que si sa capacité de mouvement peut favoriser la dispersion d'individus dans la lagune et accélérer la croissance de la population pour de faibles biomasses initiales, cette même capacité de mouvement joue plutôt un rôle de régulation de la population lorsque la biomasse totale devient importante. On peut penser que le risque de colonisation de l'herbier à zostère de la partie sud de la lagune (bassin de Salses) est limité. Ce travail ouvre enfin des perspectives de recherche sur l'amélioration du modèle de dynamique des populations de l'espèce, sur de nouvelles expérimentations à réaliser ou encore sur la surveillance écologique du milieu. Des propositions sont faites pour concevoir un modèle écologique confrontant les capacités physiologiques des macrophytes (algues vertes, Valonia et zostères) afin d'apréhender les phénomènes de compétitions et les modes de fonctionnement du réseau trophique de la lagune de Salses- Leucate. Des pistes sur la valorisation de la matière algale de V. aegagropila sont enfin proposées.

Droits : info:eu-repo/semantics/openAccess
http://archimer.ifremer.fr/doc/2006/these-2453.pdf
http://archimer.ifremer.fr/doc/00000/2453/

Éditeur(s) : Taylor & Francis Ltd
Résumé : A new method is developed to estimate daily turbulent airsea fluxes over the global ocean on a 0.25 degrees grid. The required surface wind speed (w(10)) and specific air humidity (q(10)) at 10m height are both estimated from remotely sensed measurements. w(10) is obtained from the SeaWinds scatterometer on board the QuikSCAT satellite. A new empirical model relating brightness temperatures (T-b) from the Special Sensor Microwave Imager (SSM/I) and q(10) is developed. It is an extension of the author's previous q(10) model. In addition to T-b, the empirical model includes sea surface temperature (SST) and airsea temperature difference data. The calibration of the new empirical q(10) model utilizes q(10) from the latest version of the National Oceanography Centre airsea interaction gridded data set (NOCS2.0). Compared with mooring data, the new satellite q(10) exhibits better statistical results than previous estimates. For instance, the bias, the root mean square (RMS), and the correlation coefficient values estimated from comparisons between satellite and moorings in the northeast Atlantic and the Mediterranean Sea are 0.04gkg(1), 0.87gkg(1), and 0.95, respectively. The new satellite q(10) is used in combination with the newly reprocessed QuikSCAT V3, the latest version of SST analyses provided by the National Climatic Data Center (NCDC), and 10m air temperature estimated from the European Centre for Medium-Range Weather Forecasts (ECMWF) reanalyses (ERA-Interim), to determine three daily gridded turbulent quantities at 0.25 degrees spatial resolution: surface wind stress, latent heat flux (LHF), and sensible heat flux (SHF). Validation of the resulting fields is performed through a comprehensive comparison with daily, in situ values of LHF and SHF from buoys. In the northeast Atlantic basin, the satellite-derived daily LHF has bias, RMS, and correlation of 5Wm(2), 27Wm(2), and 0.89, respectively. For SHF, the statistical parameters are 2Wm(2), 10Wm(2), and 0.94, respectively. At global scale, the new satellite LHF and SHF are compared to NOCS2.0 daily estimates. Both daily fluxes exhibit similar spatial and seasonal variability. The main departures are found at latitudes south of 40 degrees S, where satellite latent and sensible heat fluxes are generally larger.
International Journal Of Remote Sensing (0143-1161) (Taylor & Francis Ltd), 2013-07 , Vol. 34 , N. 14 , P. 5243-5261

Droits : 2013 Taylor & Francis
http://archimer.ifremer.fr/doc/00137/24825/23575.pdf
DOI:10.1080/01431161.2013.787502
http://archimer.ifremer.fr/doc/00137/24825/

Résumé : Les aciers inoxydables à haute teneur en molybdène présentent une excellente résistance à la corrosion et ont été récemment utilisés dans des applications marines. L'acier inoxydable de type 254 SMO contient du molybdène (6% Mo) et des quantités plus élevées en éléments d'alliages que les aciers inoxydables plus classiques tels que 304, 316 et 316L. Alors que Anees Uddin Malik et al. montrent que l’acier 254 SMO est moins sensible à la corrosion par piqûre en eau de mer du golfe persique, Abdulsalam et al. démontrent que bien que cet acier présente une bonne résistance à la corrosion, il reste encore sensible à une corrosion caverneuse (surtout en milieu à 16% en masse d’ion chlorure ou à plus de 30°C).La première partie de ce travail traite du comportement électrochimique de l’acier inoxydable 254 SMO immergé dans l’eau de mer naturelle en laboratoire. Ainsi deux sites de la Guyane ont été choisis pour effectuer des prélèvements d’eau. Des analyses physicochimiques de ces eaux sont réalisées et montrent que l’eau du site du Port Larivot contient une quantité en ions chlorures plus importante que celle de l’eau du site du Mahury. Une colonisation par des bactéries et crustacés (balanes) a été mise en évidence, à l’aide du microscope électronique à balayage environnemental. Les mesures électrochimiques, notamment la voltammétrie cyclique a montré l’existence d’une zone de passivation et l’augmentation du courant de passivation par un facteur de 10 en présence d’un biofilm pour l’acier inoxydable immergé en eau du Mahury durant 22 jours. La deuxième partie propose une étude approfondie du comportement de l’interface complexe métal/couche passive/biofilm. Trois différents coupons d’aciers inoxydables (brut, poli et grenaillé) ont été déposés sur site (in-situ) dans un premier temps. Dans une seconde étape, nous avons réalisé des expérimentations mixtes (incubation in-situ et croissance en laboratoire). L’évolution du potentiel d’abandon de ces aciers est très proche pour l’acier brut et l’acier poli. En revanche, celui de l’acier grenaillé, de par la présence des grains d’alumine à sa surface, affiche un comportement différent. Une étude comparative des deux expérimentations montre des différences concernant les paramètres électriques de l’interface complexe métal/couche passive/biofilm.
Stainless steels with high content in molybdenum present an excellent corrosion resistance and were recently used in marine applications. The stainless steel 254 SMO contains molybdenum (6 %) and higher amounts of alloying elements than conventional stainless steels such as 304, 316 and 316L. While Anees Uddin Malik et al. show that 254 SMO steel is less likely to be susceptible to pitting corrosion in Arabian Gulf sea water, Abdulsalam et al. demonstrate that although this steel has good resistance to corrosion, it remains still susceptible to crevice corrosion (especially in environment with 16 chloride percent weight or more than 30 ° C).The first part of this work deals with the electrochemical behaviour of stainless steel 254 SMO immersed in natural seawater at laboratory. Two sites in French Guyane were chosen to take samples of seawater. Physicochemical analyses of these waters are made and show than the in Port Larivot site seawater contains a higher quantity of chloride ion than to Mahury seawater. Colonization by bacteria and crustaceans (barnacles) was highlighted, using the environmental scanning electron microscope. The electrochemical measurements, including cyclic voltammetry showed the existence of a passivation region and increasing the passivation current by a factor of 10 in the presence of biofilm on stainless steel immersed in Mahury seawater during 22 days.The second part offers a detailed study of the behaviour of the interface metal/passive film/biofilm. Three different coupons of stainless steel (crude, polished and blasted) were deposited on the site (in-situ) in the first time. In a second step, we performed experiments mixed (in-situ incubation and growth in the laboratory). The evolution of the free potential of these steels is very close for crude steel and polished steel. Conversely, the blasted steel, by the presence of alumina grains on its surface, shows a different behaviour. A comparative study of those two experiments shows differences in the electrical parameters of the interface metal/passive film/biofilm.

http://www.theses.fr/2013AGUY0598/document

Éditeur(s) : Springer
Résumé : While it is well known that the ocean is one of the most important component of the climate system, with a heat capacity 1,100 times greater than the atmosphere, the ocean is also the primary reservoir for freshwater transport to the atmosphere and largest component of the global water cycle. Two new satellite sensors, the ESA Soil Moisture and Ocean Salinity (SMOS) and the NASA Aquarius SAC-D missions, are now providing the first space-borne measurements of the sea surface salinity (SSS). In this paper, we present examples demonstrating how SMOS-derived SSS data are being used to better characterize key land–ocean and atmosphere–ocean interaction processes that occur within the marine hydrological cycle. In particular, SMOS with its ocean mapping capability provides observations across the world’s largest tropical ocean fresh pool regions, and we discuss from intraseasonal to interannual precipitation impacts as well as large-scale river runoff from the Amazon–Orinoco and Congo rivers and its offshore advection. Synergistic multi-satellite analyses of these new surface salinity data sets combined with sea surface temperature, dynamical height and currents from altimetry, surface wind, ocean color, rainfall estimates, and in situ observations are shown to yield new freshwater budget insight. Finally, SSS observations from the SMOS and Aquarius/SAC-D sensors are combined to examine the response of the upper ocean to tropical cyclone passage including the potential role that a freshwater-induced upper ocean barrier layer may play in modulating surface cooling and enthalpy flux in tropical cyclone track regions.
Surveys In Geophysics (0169-3298) (Springer), 2014-05 , Vol. 35 , N. 3 , P. 681-722

Droits : Springer Science+Business Media Dordrecht 2013
http://archimer.ifremer.fr/doc/00152/26334/24430.pdf
DOI:10.1007/s10712-013-9244-0
http://archimer.ifremer.fr/doc/00152/26334/

Éditeur(s) : HAL CCSD Mineralogical Society of America
Résumé : International audience
In situ mineralization of CO2 in ultramafic rock-hosted aquifers is one of the promising solutions for decreasing CO2 concentrations in the atmosphere. Naturally altered ultramafic rocks suggest that carbonation processes are controlled by local heterogeneities in the structure of the rock and fluid transport at the water-rock interfaces. We studied the role of rock crystallographic anisotropy relative to the global fluid flow direction on the mineralization of CO2 by means of electron microscope analyses from the macro- to the micrometer scale (EBSD-FIB). The sample used for the measurements was a hot pressed olivine core percolated by water enriched in CO2 (pCO2 = 10 MPa) at 180 °C. During the percolation experiment, olivine was dissolved and two types of carbonates, dolomite, and magnesite, were precipitated on olivine surfaces. The results showed that the dissolution of olivine is controlled by its crystallographic properties as shown by the development of etch-pits only on the (010)ol planes and with elongated shapes parallel to the [010]ol axes. In contrast, the precipitation of carbonates is governed by hydrodynamic properties. Carbonates are heterogeneously distributed in the percolated rock. They are mainly located along the moderate (for dolomite) and the minor (for magnesite) flow paths, both oriented parallel to the principal fluid flow direction, which allow carbonates to be supplied with divalent cations (e.g., Ca2+, Mg2+, and Fe2+). In these flow paths, carbonate growth is systematically oriented normal to the flow that facilitates the development of chemical gradients with cationic supersaturation conditions for carbonate precipitation near the walls.In natural systems, the (010)ol planes are parallel to the Moho and the (100)ol planes are vertical; our study suggests that flow of CO2-rich fluids will induce precipitation of carbonates localized along, and preferentially clogging, vertical flow paths while favoring olivine dissolution along horizontal fluid pathways. This dual control of structure and fluid flow on carbonation mechanisms could be an important parameter allowing sustainable CO2 storage in peridotites, while limiting the risks of leakage toward the surface.
ISSN: 0003-004X

hal-01143393
https://hal.archives-ouvertes.fr/hal-01143393
DOI : 10.2138/am-2015-4913

Éditeur(s) : Springer
Résumé : Large benthic foraminifers are considered to be good indicators of shallow marine carbonate environments in fossil series. Over the last 50 years, the palaeoenvironment of Tertiary Nummulites accumulations has been a matter of debate, particularly because of difficulties in interpreting these deposits, and in this way, the absence of analogues in present-day seas does not help. The aim of this paper is to insight the different ways Nummulites tests and clasts may accumulate according to their hydrodynamic behaviour. Based on experimental measurements and on SEM observations, it appears that the high primary skeletal porosity of Nummulites made them easily transportable. The calculated threshold shear velocities confirm that large-sized Nummulites can be moved by weak wave-driven currents. This peculiar hydrodynamic behaviour of Nummulites could explain the diversity of depositional models. Depending on local hydrodynamic conditions, autochthonous Nummulites deposits can be preserved as in situ winnowed bioaccumulations or be accumulated offshore, onshore or alongshore, away from the original biotope.
Facies (0172-9179) (Springer), 2006-05 , Vol. 52 , N. 2 , P. 221-235

Droits : Springer-Verlag 2005
http://archimer.ifremer.fr/doc/00085/19597/17234.pdf
DOI:10.1007/s10347-005-0035-z
http://archimer.ifremer.fr/doc/00085/19597/

Résumé : Sea fish farms with production of more than 20 tons per year in France must obtain two operating licences: (i) one for Sea Farming (AECM), with the aim of ensuring that the granted site and use of the maritime public domain for exploitation will respect all restrictions of general interest; (ii) one for regulating Facilities Classified for the Protection of the Environment (ICPE). Although the first one requires a relatively simple licence request file, the second one demands a very complete file, which includes, beyond the notice of exploitation information, a complete impact study, as well as a hazards study and a health and safety notice. In this context, petitioners in Corsica (adjustment of status or new exploitation) are faced with the same difficulties, which highlighted the need for a methodological guide adapted to each region's specific situation, assembling in particular the necessary baseline data (legal, zootechnical, geographical, climatic, socio-economic, ecological...) as well as recognised methods for evaluating the potential effects of the farm on the environment. Development of this guide was supported by ADEC and supervised by a steering committee composed of representatives from the administrations concerned, fish farmers and scientific bodies. The significant aspects dealt with the effects of fish farming on Posidonie herbarium, a protected species very present in Corsica and with coordinating the two AECM and ICPE procedures. For each part of the ICPE file, the guide introduces the technical or scientific context and, depending upon the case, the state of the art, sources of available data, acquisition and methods of acquiring measurements and of assessing the potential effects, as well as practical editing recommendations. Finally, the guide is made complete by a model schedule of conditions designed to help petitioners to have a specialist research department incorporate all or part of the file. This guide primarily concerns first-time marine facilities for exploitation in Corsica, conceived of as in the open sea rather than in confined spaces. Nonetheless, any fish farmer or future fish farmer needing to process a request for an exploitation licence may find it useful.
Les piscicultures marines de plus de 20 t/an de production sont soumises en France à l'obtention de deux autorisations d'exploiter : (i) celle au titre des Cultures Marines (AECM), visant à s'assurer que le site concédé et l'usage du domaine public maritime pour l'exploitation permettent de respecter l'ensemble des contraintes d'intérêt général ; (ii) celle au titre de la réglementation des Installations Classées pour la Protection de l'Environnement (ICPE). Si la première nécessite un dossier de demande d'autorisation relativement simple, la seconde requiert un dossier très complet, qui comprend, outre une notice de renseignements sur l'exploitation, une étude d'impact complète, ainsi qu'une étude des dangers et une notice d'hygiène et de sécurité. Dans ce contexte, les demandeurs en Corse (régularisation ou exploitation nouvelle) sont confrontés aux mêmes difficultés, ce qui a mis en évidence le besoin d'un guide méthodologique adapté aux spécificités régionales, rassemblant en particulier les données de base nécessaires (juridiques, zootechniques, géographiques, climatiques, socio-économiques, écologiques...) ainsi que les méthodes reconnues de l'évaluation des effets potentiels de la ferme sur l'environnement. L'élaboration de ce guide a été soutenue par l'ADEC et suivie par un comité de pilotage composé de représentants des administrations concernées, des pisciculteurs et d'organismes scientifiques. Les aspects importants ont porté sur les effets de la pisciculture sur l'herbier de Posidonie, espèce protégée très présente en Corse et sur la coordination entre les deux procédures AECM et ICPE. Pour chaque partie du dossier ICPE, le guide présente le contexte technique ou scientifique et selon le cas, l'état de l'art, les sources de données disponibles, les méthodes d'acquisition des mesures et d'évaluation des effets potentiels, ainsi que des recommandations pratiques de rédaction. Enfin, le guide est complété par un cahier des charges type destiné à aider les demandeurs à confier à un bureau d'étude spécialisé la réalisation de tout ou partie de la constitution du dossier. Ce guide concerne prioritairement les installations marines de nouvelles exploitations en Corse, envisagées en mer ouverte plutôt que dans des espaces confinés. Néanmoins tout pisciculteur ou futur pisciculteur devant instruire une demande d'autorisation d'exploiter peut y trouver intérêt.

Droits : info:eu-repo/semantics/openAccess
http://archimer.ifremer.fr/doc/2004/rapport-2188.pdf
http://archimer.ifremer.fr/doc/00000/2188/

Éditeur(s) : Séminaire CLAROM, 14èmes journées de l'Hydrodynamique, Val de Reuil, 18-20 novembre 2014
Résumé : From measurements obtained at high level frequency over a long period of time, we aim to determine the different characteristics of the flow situated in the IFREMER (French Research Institute for Exploration of the Sea) wave and current flume tank in Boulogne-Sur-Mer. This 2 data measured with a LDV (Laser Doppler Velocimetry) allows to get the characteristics of turbulence and the incident velocity fluctuations. The well-controlled conditions in the flume and the high sampling frequency of LDV system will give us a good estimate of the different flow characteristics such as dissipation, the Reynolds number, the injection scales, Taylor and Kolmogorov. The objective is to place the marine current turbine in this flow and then to study the influence of turbulence on the rotor of this turbine. The flow velocity is imposed and two different rates of turbulence are analysed.
A partir de données à haute fréquence acquises pendant une longue période de temps, on cherche à déterminer les différentes caractéristiques de l’écoulement généré au bassin d’essais à houle et courant d’IFREMER à Boulogne-Sur-Mer. Ces données mesurées avec un système LDV permettent de caractériser la turbulence et les fluctuations de la vitesse du courant incident. Les conditions contrôlées du bassin et les longues périodes d’acquisition du système LDV nous donneront une bonne estimation des différentes caractéristiques de l’écoulement tels que la dissipation, le nombre de Reynolds, les échelles d’injection, de Taylor et de Kolmogorov. Dans un deuxième temps nous étudions les effets de la turbulence de l’écoulement sur le comportement d’une hydrolienne tri-pale à axe horizontal.L’objectif est de placer la maquette d’hydrolienne dans cet écoulement et étudier l’influence de la turbulence sur le rotor de cette turbine. La vitesse de l’écoulement est imposée et deux taux de turbulence différents ont été étudiés.

Droits : info:eu-repo/semantics/openAccess
http://archimer.ifremer.fr/doc/00247/35814/34329.pdf
http://archimer.ifremer.fr/doc/00247/35814/

Éditeur(s) : HAL CCSD Elsevier
Résumé : The slow advance of a crack in soda-silicate glasses was studied at nanometer scale by in-situ and real-time atomic force microscopy (AFM) in a well-controlled atmosphere. An enhanced diffusion of sodium ions in the stress-gradient field at the sub-micrometric vicinity of the crack tip was revealed through several effects: growth of nodules in AFM height images, changes in the AFM tip–sample energy dissipation. The nodules patterns revealed a dewetting phenomenon evidenced by ‘breath figures'. Complementary chemical micro-analyses were done. These experimental results were explained by a two-step process: (i) a fast migration (typical time: few milliseconds) of sodium ions towards the fracture surfaces as proposed by Langford et al. [J. Mat. Res. 6 (1991) 1358], (ii) a slow backwards diffusion of the cations as evidenced in these AFM experiments (typical time: few minutes). Measurements of the diffusion coefficient of that relaxing process were done at room temperature. Our results strengthen the theoretical concept of a near-surface structural relaxation due to the stress-gradient at the vicinity of the crack tip. The inhomogeneous migration of sodium ions might be a direct experimental evidence of the presence of sodium-rich channels in the silicate structure [A. Meyer et al., Phys. Rev. Let. 93 (2004) 027801].
ISSN: 0022-3093

hal-00407634
https://hal.archives-ouvertes.fr/hal-00407634
DOI : 10.1016/j.jnoncrysol.2006.09.034

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
Electrical resistivity soundings are used by geophysicists to determine the structure and composition of the Earth's crust and mantle and to explore natural resources (ore, oil, gas, water). Their interpretations in terms of composition and in-situ physical conditions depend mainly on laboratory measurements of electrical conductivity of rocks at simulated crustal conditions of temperature, pressure, saturation and pore pressures. These measurements present a numbers of limitations, in particular, in the case where conductive pore fluids are present, as in the case of deep reservoir conditions, where temperature exceeds 250 A degrees C. Here, we present a new cell capable of measuring electrical conductivity of large saturated samples at confining pressure up to 200 MPa, pore pressure up to 50 MPa, and temperature up to 500 A degrees C. The measurement cell has been developed in a commercial, internally heated, gas pressure apparatus (Paterson press). It is based on the concept of "guard ring" electrode, which is adapted to samples that are jacketed by a very conductive, metallic material. Numerical modeling of the current flow in the electrical cell allowed defining the optimal cell geometry. Calibration tests have been performed on Fontainebleau sandstones saturated with electrolytes of different conductivities, up to 350 A degrees C. The resulting electrical formation factor and temperature dependence of electrical conductivity are in very good agreement with previous studies. This new cell will improve the exploration and exploitation of deep fluid reservoirs, as in unconventional, high enthalpy geothermal fields. In particular, the investigations address possible effects of fluid-rock interactions on electrical resistivity of a reservoir host rock.
ISSN: 0169-3913

hal-00681997
https://hal.archives-ouvertes.fr/hal-00681997
DOI : 10.1007/s11242-011-9846-2

Éditeur(s) : HAL CCSD
Résumé : In the bay of Aigues-Mortes, the managers of the co astal cities try to preserve the socio-economic and patrimonial stakes against the coastal hazards, such as contamination, storm surge and erosion. In this context, a massive beach nourishment of sand (1 million of m3 for 10km of coastline) was made at the beginning of year 2008 to reduce erosion. The REPBAM project (REchargements et Panaches sédiment aires dans la Baie d'Aigues-Mortes) aims to qualify and quantify by in-situ measurements and numerical modelling: 1. the geomorphological evolution of this modified coast and 2. the impact of the sediment's resuspension on the coastal ecosystems, in particular the one of the Posidonia oceanica seagrass. A numerical modelling "wave/current/sediment" is first implemented for December 2008. Nested and curvilinear grids allow a very high resolution for the beach area but also include the inner shelf where the seagrasses are located. Hydrodynamic and topo-bathymetric measurements were acquired from January to May 2012. Model and measurements results show the same trends during storms: strong currents, seaward migrationof the innerbar, sediment resuspension and turbid on the inner shelf.
Coastal Dynamics 2013
Arcachon, France

hal-00908082
https://hal.archives-ouvertes.fr/hal-00908082

Éditeur(s) : HAL CCSD Springer
Résumé : Borehole logs provide in situ information about the fluctuations of petrophysical properties with depth and thus allow the characterization of the crustal heterogeneities. A detailed investigation of these measurements may lead to extract features of the geological media. In this study, we suggest a regularity analysis based on the continuous wavelet transform to examine sonic logs data. The description of the local behavior of the logs at each depth is carried out using the local Hurst exponent estimated by two (02) approaches: the local wavelet approach and the average-local wavelet approach. Firstly, a synthetic log, generated using the random midpoints displacement algorithm, is processed by the regularity analysis. The obtained Hurst curves allowed the discernment of the different layers composing the simulated geological model. Next, this analysis is extended to real sonic logs data recorded at the Kontinentales Tiefbohrprogramm (KTB) pilot borehole (Continental Deep Drilling Program, Germany). The results show a significant correlation between the estimated Hurst exponents and the lithological discontinuities crossed by the well. Hence, the Hurst exponent can be used as a tool to characterize underground heterogeneities.
ISSN: 1866-7411

hal-00617470
https://hal.archives-ouvertes.fr/hal-00617470
DOI : 10.1007/s12517-010-0129-y

Éditeur(s) : HAL CCSD Elsevier Masson
Résumé : While oceanic circulation in the Gulf of Lion (GoL) has often been studied in calm weather or with northerly winds (Tramontane or Mistral) through observations and numerical circulation models, few studies have focused on southeasterly storm events. Yet, correct representation of the circulation during storms is crucial if the suspension of sediments is to be correctly modelled throughout the Gulf. The purpose of this paper is to describe the hydrodynamics in the Gulf of Aigues-Mortes (NW of the GoL) during the storm of 18 February 2007 by using a set of data from an ADCP station placed at a depth of 65 m on the sea bed off the coast at Sète, supplemented by the ocean circulation model SYMPHONIE. This storm was characterized by a moderate south-easterly wind (15 m . s−1) and waves of up to 5 m of significant height at its apex. At the ADCP, strong currents of up to 0.8 m . s−1 near the surface and 0.5 m . s−1 near the bottom were recorded, parallel to the coast, flowing towards the south-west. The simulated currents were widely underestimated, even taking the effect of waves into account in the model. It was suspected that the representation of the wind in the atmospheric model was an underestimation. A new simulation was therefore run with an arbitrarily chosen stronger wind and its results were in much better agreement with the measurements. A simplified theoretical analysis successfully isolated the wind-induced processes, responsible for the strong currents measured during the apex and the strong vertical shear that occurred at the beginning of the storm. These processes were: 1/ the barotropic geostrophic current induced by a wind parallel to the coast and 2/ the Ekman spiral. The duration of the storm (about 36 h at the apex) explains the continuous increase of the current as predicted by the theory. The frictionally induced Ekman transport explains the current shear in the surface layer in the rising stage of the storm, and the addition of high waves and strong wind at the apex is more in favour of strong vertical mixing in the surface layer.
ISSN: 1631-0713

hal-00908200
https://hal.archives-ouvertes.fr/hal-00908200
DOI : 10.1016/j.crte.2013.07.001