Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Studies on tree biomechanical design usually focus on stem stiffness, resistance to breakage or uprooting, and elastic stability. Here we consider another biomechanical constraint related to the interaction between growth and gravity. Because stems are slender structures and are never perfectly symmetric, the increase in tree mass always causes bending movements. Given the current mechanical design of trees, integration of these movements over time would ultimately lead to a weeping habit unless some gravitropic correction occurs. This correction is achieved by asymmetric internal forces induced during the maturation of new wood. The long-term stability of a growing stem therefore depends on how the gravitropic correction that is generated by diameter growth balances the disturbance due to increasing self weight. General mechanical formulations based on beam theory are proposed to model these phenomena. The rates of disturbance and correction associated with a growth increment are deduced and expressed as a function of elementary traits of stem morphology, cross-section anatomy and wood properties. Evaluation of these traits using previously published data shows that the balance between the correction and the disturbance strongly depends on the efficiency of the gravitropic correction, which depends on the asymmetry of wood maturation strain, eccentric growth, and gradients in wood stiffness. By combining disturbance and correction rates, the gravitropic performance indicates the dynamics of stem bending during growth. It depends on stem biomechanical traits and dimensions. By analyzing dimensional effects, we show that the necessity for gravitropic correction might constrain stem allometric growth in the long-term. This constraint is compared to the requirement for elastic stability, showing that gravitropic performance limits the increase in height of tilted stem and branches. The performance of this function may thus limit the slenderness and lean of stems, and therefore the ability of the tree to capture light in a heterogeneous environment.
ISSN: 0022-5193

hal-00534316
https://hal.archives-ouvertes.fr/hal-00534316
DOI : 10.1016/j.jtbi.2008.10.011

Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
Numerical models show that small-scale convection (SSC) occurring atop a mantle plume is a plausible mechanism to rejuvenate the lithosphere. The triggering of SSC depends on the density contrast and on the rheology of the unstable layer underlying the stagnant upper part of the thermal boundary layer (TBL). Partial melting may change both properties. We analyze, using 2-D numerical simulations, how partial melting influences the dynamics of time-dependent SSC instabilities and the resulting thermo-mechanical rejuvenation of an oceanic plate moving atop of a plume. Our simulations show a complex behavior, with acceleration, no change, or delay of the SSC onset, due to competing effects of the latent heat of partial melting, which cools the plume material, and of the buoyancy increase associated with both melt retention and depletion of residue following melt extraction. The melt-induced viscosity reduction is too localized to affect significantly SSC dynamics. Faster SSC triggering is promoted for low melting degrees (low plume temperature anomalies, thick lithosphere, or fast moving plates), which limit both the temperature reduction due to latent heat of melting and the accumulation of depleted buoyant residue in the upper part of the unstable layer. In contrast, high partial melting degrees lead to a strong temperate decrease due to latent heat of melting and development of a thick depleted layer within the sublithospheric convecting layer, which delay the development of gravitational instabilities. Despite differences in SSC dynamics, the thinning of the lithosphere is not significantly enhanced relatively to simulations that neglect partial melting.
ISSN: 1525-2027

hal-01277175
https://hal.archives-ouvertes.fr/hal-01277175
DOI : 10.1002/2015GC005967

Éditeur(s) : HAL CCSD
Résumé : 38 pages
Rapport
The Chicxulub impact crater, México, is unique. It is the only known terrestrial impact structure that has been directly linked to a mass extinction event and the only terrestrial impact with a global ejecta layer. Of the three largest impact structures on Earth, Chicxulub is the best preserved. Chicxulub is also the only known terrestrial impact structure with an intact, unequivocal topographic peak ring. Chicxulub’s role in the Cretaceous/Paleogene (K-Pg) mass extinction and its exceptional state of preservation make it an important natural laboratory for the study of both large impact crater formation on Earth and other planets and the effects of large impacts on the Earth’s environment and ecology. Our understanding of the impact process is far from complete, and despite more than 30 years of intense debate, we are still striving to answer the question as to why this impact was so catastrophic.During International Ocean Discovery Program (IODP) Expedition 364, Paleogene sediments and lithologies that make up the Chicxulub peak ring were cored to investigate (1) the nature and formational mechanism of peak rings, (2) how rocks are weakened during large impacts, (3) the nature and extent of post-impact hydrothermal circulation, (4) the deep biosphere and habitability of the peak ring, and (5) the recovery of life in a sterile zone. Other key targets included sampling the transition through a rare midlatitude section that might include Eocene and Paleocene hyperthermals and/or the Paleocene/Eocene Thermal Maximum (PETM); the composition and character of the impact breccias, melt rocks, and peak-ring rocks; the sedimentology and stratigraphy of the Paleocene–Eocene Chicxulub impact basin infill; the chronology of the peak-ring rocks; and any observations from the core that may help us constrain the volume of dust and climatically active gases released into the stratosphere by this impact. Petrophysical property measurements on the core and wireline logs acquired during Expedition 364 will be used to calibrate geophysical models, including seismic reflection and potential field data, and the integration of all the data will calibrate impact crater models for crater formation and environmental effects. The proposed drilling directly contributes to IODP Science Plan goals:Climate and Ocean Change: How resilient is the ocean to chemical perturbations? The Chicxulub impact represents an external forcing event that caused a 75% level mass extinction. The impact basin may also record key hyperthermals within the Paleogene.Biosphere Frontiers: What are the origin, composition, and global significance of subseafloor communities? What are the limits of life in the subseafloor? How sensitive are ecosystems and biodiversity to environmental change? Impact craters can create habitats for subsurface life, and Chicxulub may provide information on potential habitats for life, including extremophiles, on the early Earth and other planetary bodies. Paleontological and geochemical studies at ground zero will document how large impacts affect ecosystems and effects on biodiversity.Earth Connections/Earth in Motion: What are the composition, structure and dynamics of Earth’s upper mantle? What mechanisms control the occurrence of destructive earthquakes, landslides, and tsunami? Mantle uplift in response to impacts provides insight into dynamics that differ between Earth and other rocky planets. Impacts generate earthquakes, landslides, and tsunami, and scales that generally exceed plate tectonic processes yield insight into effects, the geologic record, and potential hazards.IODP Expedition 364 was a Mission Specific Platform expedition to obtain subseabed samples and downhole logging measurements from the sedimentary cover sequence and peak ring of the Chicxulub impact crater. A single borehole was drilled into the Chicxulub impact crater on the Yucatán continental shelf, recovering core from 505.7 to 1334.73 m below seafloor with ~99% core recovery and acquiring downhole logs for the entire depth.
International Ocean Discovery Program

hal-01639520
https://hal.archives-ouvertes.fr/hal-01639520
DOI : 10.14379/iodp.pr.364.2017

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The kinetics of hydrogenation of dry iron-bearing olivine single crystals was determined by performing hydration experiments under hydrothermal conditions at high pressure. The experiments were performed in a multi-anvil press at 3 GPa, for a temperature range between 900 and 1200 °C and for various durations. The oxygen fugacity was buffered along Ni-NiO joint. Polarized Fourier transform infrared spectroscopy and recent empirical calibration were used to quantify the hydroxyl distributions in the samples along crystallographic axes after the experiments. The chemical diffusion coefficients are similar (barely slower) than in olivine hydrated at lower pressure (0.2 and 0.3 GPa) for the same diffusion mechanism. Under the given experimental conditions, the anisotropy of diffusion is the same as for proton-vacancy mechanism, with diffusion along the [0 0 1] axis faster than along the [1 0 0]. However, the anisotropy at 3 GPa is weaker compared to measurements at lower pressures and the analysis of concentration profiles using 3D models shows that an isotropic solution could also be relevant. Fits of the diffusion data to an Arrhenius law yield activation energies for the slightly faster [0 0 1] axis of the crystallographic axes around 198 ± 5 kJ mol−1, a value only slightly lower than the results from previous experimental studies for natural iron-bearing olivine hydrogenated at lower confining pressure. At 3 GPa, hydrogenation can be well approximated by a single mechanism controlled by coupled diffusion of protons and octahedral vacancies (di- and tri-valent ions). The diffusion rates are fast enough to alter hydrogen concentration within olivine in xenoliths ascending from the mantle or experiencing hydrogen-rich metasomatism events, but too slow to permit complete homogenization of hydrogen in olivine-rich rocks at kilometer scale in less than one My.
ISSN: 0031-9201

hal-01412663
https://hal.archives-ouvertes.fr/hal-01412663
DOI : 10.1016/j.pepi.2016.08.005

Éditeur(s) : HAL CCSD
Résumé : International audience
A key element of the biomechanical design of trees is their ability to generate largemechanical stresses in wood at the stem periphery. This function is necessary for the tree tocontrol the orientation of its axes, and therefore to grow in height, maintain its branches at anoptimal angle or achieve adaptive reorientations (Fournier et al., 2013). This “maturationstress” appears in wood fibres during their cellular maturation when their secondary cell wallis thickening. In hardwoods, the stress asymmetry is generated by the formation of specificfibres with a very high tensile growth stress on the upper side of the inclined axis. Theresulting tension wood has microstructural features highly different from the normal wood.Tension wood in almost all temperate species has a specific gelatinous cell wall layer, calledG-layer, that is not lignified and highly mesoporous (Chang et al., 2015). It has been shownrecently, at the macroscopic scale, that cellulose tension appears during maturation and issynchronous with the development of this specific layer (Clair et al., 2011). Tropical species,like simarouba, are able to generate lignified tension wood fibres. The mechanisms of stressgeneration in tension wood fibres are not yet well known. The aim of our study is tounderstand these mechanisms and to know the spatial and temporal kinetics of the differentcell wall layers stiffening during maturation, in parallel with tensile stress generation.Contact-Resonance Atomic Force Microscopy, CR-AFM, was used here to address thisquestion on embedded samples (Arnould and Arinero, 2015) using dual resonance frequencytracking (DRFT, Rodriguez et al., 2007). Change in the contact modulus between, and within,each layer of the cell wall has been measured on several radial lines of developing fibres atdifferent steps. In order to understand the obtained results, and to estimate the sensitivity ofthe AFM indentation-like technique to the different cell wall components stiffness, an elasticanisotropic indentation model was used (Vlassak et al., 2003; Jäger et al., 2011). Finally,these mechanical measurements have been compared to topochemical data obtained on thesame fibres.
8th Plant Biomechanics International Conference
Nagoya, Japan

hal-01436113
https://hal.archives-ouvertes.fr/hal-01436113

Éditeur(s) : HAL CCSD MAIK Nauka/Interperiodica
Résumé : Interaction between surface processes and deep tectonic processes plays a key role in the structural evolution, kinematics and exhumation of rocks in orogenic wedges. The deformation patterns observed in analogue models applied to natural cases of present active or ancient mountain belts reflect several first order processes that result of these interactions. Internal strain partitioning due to mechanical behaviour of a thrust wedge has a strong impact on the vertical component of displacement of tectonic units that in return favour erosion in domains of important uplift. Such strain partitioning is first controlled by tectonic processes, but surface processes exert a strong feed back on wedge dynamics. Indeed, material transfer in thrust wedges not only depends on its internal dynamics, it is also influenced by climate controlled surface processes involving erosion and sedimentation. Effects of erosion are multiple: they allow long term localization of deformed domains, they favour important exhumation above areas of deep underplating and combined with sedimentation in the foreland they contribute to maintain the wedge in a critical state for long time periods. The simple models illustrate well how mountain belts structure, kinematics of tectonic units and exhumation are determined by these complex interactions.
ISSN: 0016-8521

hal-00561361
https://hal.archives-ouvertes.fr/hal-00561361
DOI : 10.1134/S0016852110060075

Éditeur(s) : HAL CCSD
Résumé : International audience
The carbon capture and storage is considered as one of the solutions of reducing the effects of global warming. It consists in injecting large quantities of CO 2 in supercritical form directly into deeply located geological formations. One of the methods involves sequestration in the carbonate sedimentary rocks (sandstones and limestones) which are considered as a promising solution. The morphology of the pore network and solid skeleton defines important macroscopic prop-erties of the rock (permeability, stiffness). Modelling at micro scale of random heterogeneous materials (porous media) should be based on morphological and statistical characterisation 1,2 of the investigated microstructure. The work is focused on a reconstruction method by grains deposit 3 , for various range of pa-rameters, to obtain equivalent model of natural rock samples (oolitic limestone and fontainebleau sandstone). Generated samples satisfy morphological and statistical informations 4 which were obtained by 3D image analysis of X-ray tomography of the natural rock samples. For validation of the modelling numerical computations of mechanical and transfer properties are also provided.
14th European Mechanics of Materials Conference - EMMC14
Gothembourg, Sweden

hal-01103163
https://hal.archives-ouvertes.fr/hal-01103163

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Analogue and numerical models have shown that the strength of the lithospheric mantle controls the mode of lithosphere deformation. In extension, the presence or absence of a high strength brittle mantle respectively leads to localized or distributed rifting. However, first order geophysical data question the existence of such a brittle mantle. Here we use 2-D finite-element large strain modelling to quantify the impact of a ductile localizing mantle - instead of brittle - in triggering continental rifting. As a novelty, the mantle rheology considers the effect of grain boundary sliding during strain-induced grain size reduction, which may promote a significant strength drop and subsequent strain localization at low mantle temperature (< 700-800 °C). Our results reveal that such ductile localizing mantle implies varying modes of continental rifting that mainly depend on both the amount of weakening in the ductile mantle and the strength of the lower ductile crust. A medium to strong lower crust implies coupling between the upper crust and ductile localizing mantle, yielding to narrow continental rifting. In contrast, a weak lower crust implies decoupling between the upper crust and ductile localizing mantle, giving rise to a switch from distributed faulting at incipient strain to localized faulting at large strain. Ductile strain localization in the lithospheric mantle is therefore sufficient to trigger continental rifting, although a critical amount of weakening is required. Such ductile localizing mantle provides a relevant geological and mechanical alternative to the brittle mantle. It moreover provides a wider variety of modes of upper crustal faulting that are commonly observed in nature.
ISSN: 0040-1951

Droits : info:eu-repo/semantics/OpenAccess
insu-00924254
https://hal-insu.archives-ouvertes.fr/insu-00924254
https://hal-insu.archives-ouvertes.fr/insu-00924254/document
https://hal-insu.archives-ouvertes.fr/insu-00924254/file/Gueydan_precigout_2014_Tectonophysics.pdf
DOI : 10.1016/j.tecto.2013.11.029

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
3D seismic data located in the Gjallar Ridge (Vøring Basin, offshore Norway) reveals a closely-spaced polygonal fault system affecting more than 800 m of homogeneous mud-dominated Quaternary and Tertiary sequences. As some faults reach the modern seafloor, they represent an active polygonal fault system at present day. Even if the processes remain unclear and are still under debate, it is generally agreed that the initiation of polygonal faults is the result of shallow burial dewatering of fine-grained unconsolidated sediments by volumetric compaction. 3D seismic data are commonly interpreted by propagating horizons automatically and by picking faults manually. However, in the case of polygonal fault intervals, this approach is time consuming due to the huge number of faults and because automatic propagation can be misleading. In this study, we applied a new technique of 3D seismic interpretation based on a sequential stratigraphy analysis, using the new PaleoScan© software (Eliis Company). It allowed us to build a 3D geological model computing more than 300 horizons within the faulted intervals. We then used the coherency attribute, depicting anomalies in the shape of seismic waveform like faults, in order to constrain a possible link between fault distribution and stratigraphic levels. Our approach allows fault throws to be calculated in milliseconds on any polygonal fault plane. The result shows that fault segments have been reactivated by dip-linkage. Distribution of faults depends on mechanical units, intervals characterized by different petrophysical properties, which are independent from lithological and diagenetic changes. According to these results, we propose a model showing the evolution of polygonal fault intervals in which faulting stages are separated by a quiescence phase during burial. A first tier of polygonal faults is initiated at a specific depth, according to the Cam-clay model. Then, following a period of quiescence during which mud-rich sediments continued to accumulate, new fault segments are initiated above the first mechanical unit and within this undeformed interval. New nucleated faults then connect downward to pre-existing underlying polygonal fault system, thus progressively increasing the thickness of the faulted interval.
ISSN: 0025-3227

hal-00772470
https://hal.archives-ouvertes.fr/hal-00772470
DOI : 10.1016/j.margeo.2012.07.016

Éditeur(s) : HAL CCSD
Résumé : International audience
Proceedings - 2014 International Conference on Electromag- netics in Advanced Applications, ICEAA 2014
Palm Beach, Aruba, Aruba

hal-01116596
https://hal.inria.fr/hal-01116596

Résumé : Ce travail est l'expression d'une volonté de chercheurs, de la Carabe d'améliorer les connaissances scientifiques méso- et micro-météorologiques appliquées aux milieux insulaires sous influence des alizés et de développer la recherche dans ces domaines.On sait que le phénomène météorologique le plus remarquable impactant les îles de la Caraïbe reste le cyclone tropical. Mais d'autres phénomènes, a des échelles inferieures, telles que les pluies intenses, les houles, la dégradation de la qualité de l'air ont une importance aigüe en termes de risques naturels ou de risques sur la sante. Ces exemples attestent la nécessité d'utiliser des méthodes de descente d'échelle pour exploiter l'information météorologique et/ou climatique de grande échelle et dériver des scenarios locaux et régionaux appliques aux territoires insulaires. Ce défi est important car l'attente d'analyses scientifiques pertinentes dans ces domaines est grande.Les travaux présentés dans ce mémoire ont pour principaux objectifs la simulation numérique puis l'analyse des mécanismes méso- et micro-échelles qui induisent des circulations locales diurnes et nocturnes sur l'archipel de la Guadeloupe à l'aide de codes numériques météorologiques éprouves car largement utilises en recherche et en prévision opérationnelle.Ils constituent donc la première étude de modélisation numérique à haute résolution en basse atmosphère, par descente d'échelle dynamique, pour des intervalles d'espace compris entre 1 km et 111 m sur cet archipel.Le modelé atmosphérique Weather Research and Forecasting ARW V3.4 (WRF ARW), non-hydrostatique, a été utilise pour l'ensemble des simulations pour modéliser la troposphère depuis l'échelle globale à l'échelle de la turbulence.Trois situations météorologiques classiques réelles d'une durée de 48 heures, correspondant à 80 % des situations météorologiques observées dans la zone, alizes soutenus (AS), alizes moyens (AM), alizes faibles (AF) ont été examinées. Ces situations sont caractérisées par les valeurs du nombre de Froude local suivantes : 0,82 (AS), 0,41 (AM) et 0,21 (AF). Six domaines de modélisation ont été sélectionnés pour effectuer les descentes d'échelle dynamiques : D01 (maille de 27 km), D02 (maille de 9 km), D03 (maille de 3 km), D04 (maille de 1 km), D05 (maille de 333 m) et D06 (maille de 111 m) avec soixante-dix niveaux verticaux. Les quatre premiers domaines (D01 à D04) couvrent l'archipel de la Guadeloupe et sont utilisés en mode méso-échelle à l'aide d'un schéma d'ensemble de couche limite planétaire YSU. Les domaines D05 (couvrant l'île de la Basse-Terre et le centre de l'archipel) et D06 (couvrant la zone littorale et rurale du Petit Cul-de-Sac Marin et la zone urbaine de l'agglomération pointoise) sont utilisés en mode Large Eddy Simulation avec une fermeture de la turbulence 1,5 TKE 3D. Le modèle WRF a été forcé toutes les six heures par l'assimilation des champs d'analyses globales du modèle NCEP FNL (1° de résolution). Les simulations effectuées ont permis d'obtenir des champs de variables météorologiques 10-minutes à très hautes résolutions spatiales.Les résultats des simulations méso- et micro-échelles ont été confrontés aux valeurs expérimentales obtenues à l'aide de capteurs places sur des mâts météorologiques (campagne Atmo-Mangrov et réseau de mesure Météo-France). Il s'agissait d'optimiser l'utilisation des couplages de codes numériques tout en conservant la possibilité de les confronter aux observations expérimentales.Les résultats des simulations numériques micro-échelles, des différents cas (AS, AM, AF) sont utilisées pour forcer (c'est-à-dire définir les conditions limites) un modèle lagrangien de dispersion de particules : FLEXPART. Le système couple FLEXPART-WRF a été employé dans le domaine D06 pour étudier la dispersion du panache d'oxydes d'azote émis par la principale usine de production d'électricité de l'île.
The present work expresses the will of Caribbean researchers to improve the meso- and micro-meteorological scientific knowledge of the trade winds influenced island areas, and to develop research in these domains.It is well known that tropical hurricanes remain the most remarkable meteorological phenomena that affect the Caribbean islands. But some other phenomena, of smaller scale, such as intense rainfall events, swells, or air quality degradation, are of extreme importance for natural or health hazards. These examples show the need to use downscaling methods to exploit large scale meteorological or climatic information, and to obtain local and regional scenarios for the island areas. This is an important challenge, as sound scientific studies in these matters are eagerly expected. The aim of the research works exposed in the present dissertation is numerical simulation and analysis of the meso- and microscale mechanisms that induce diurnal and nocturnal local circulations in the Guadeloupe archipelago, using numerical meteorological models that are widely used in research and in operational forecasting.These works represent the first high-resolution (1 km to 111 m) numerical study of the lower atmosphere over the Guadeloupe archipelago. The Weather Research and Forecasting ARW 3.4 (WRF-ARW) model is used to simulate the troposphere from global scale to turbulence scale. Real cases of three typical weather types (80% of cases during a year) are examined during 48 hours : strong trade winds (STW), medium trade winds (MTW) and weak trade winds (WTW). These weather types are characterized by values of the local Froude number : 0.82 (STW), 0.41 (MTW) and 0.21 (WTW). Six domains have been selected for the dynamical downscaling : D01 (grid spacing of 27 km), D02 (grid spacing of 9 km), D03 (grid spacing of 3 km), D04 (grid spacing of 1 km), D05 (grid spacing of 333 m) and D06 (grid spacing of 111 m), including 70 vertical levels. The first four domains (D01 to D04) cover the Guadeloupe archipelago and are used in the meso-scale simulations with the planetary boundary layer scheme YSU (ensemble mean). Domain D05 (covering the Basse-Terre island and the middle of the archipelago) and domain D06 (covering the coastal and rural area of Le Petit Cul-de-Sac Marin and the urban area of Pointe-à-Pitre), are employed in the micro-scale simulation (LES) with the 3D TKE 1.5 order closure scheme. WRF has been 6 hourly reinitialized with the NCEP FNL global analyses (resolution of 1°). These simulations permitted to obtain 10-minutes meteorological variable fields with a very high resolution (111 m).Meso-scale and micro-scale model results have been evaluated with observational data from meteorological stations (field campaign Atmo-Mangrov, French Met Office).Once validated, the micro-scale model outputs have been used for the assimilation of the lagrangian particle dispersion model : FLEXPART. The coupling FLEXPART-WRF has been employed in domain D06, in order to analyze the dispersion of the nitrogen oxide plume emitted by the main power plant of the archipelago.

http://www.theses.fr/2014AGUY0735/document

Éditeur(s) : HAL CCSD Royal Society
Résumé : International audience
Trees control their posture by generating asymmetric mechanical stress around the periphery of the trunk or branches. This stress is produced in wood during the maturation of the cell wall. When the need for reaction is high, it is accompanied by strong changes in cell organization and composition called reaction wood, namely compression wood in gymnosperms and tension wood in angiosperms. The process by which stress is generated in the cell wall during its formation is not yet known, and various hypothetical mechanisms have been proposed in the literature. Here we aim at discriminating between these models. First, we summarize current knowledge about reaction wood structure, state and behaviour relevant to the understanding of maturation stress generation. Then, the mechanisms proposed in the literature are listed and discussed in order to identify which can be rejected based on their inconsistency with current knowledge at the frontier between plant science and mechanical engineering.
Journal of the Royal Society Interface

hal-01392832
https://hal.archives-ouvertes.fr/hal-01392832
https://hal.archives-ouvertes.fr/hal-01392832/document
https://hal.archives-ouvertes.fr/hal-01392832/file/AlmerasClair2016_JRSInterface_Critical%20review%20on%20the%20mechanisms%20of%20maturation%20stress%20generation%20in%20trees_HAL.pdf
DOI : 10.1098/rsif.2016.0550

Éditeur(s) : HAL CCSD Institute for Scientific Computing and Information
Résumé : International audience
In this paper, we solve a problem describing the mechanical deformations of a porous medium in the presence of a monophasic linear flow or a two phase nonlinear flow with the purpose of modelizing subsidence of hydrocarbon reservoirs. An essential characteristics of this problem is that the mechanical deformation and the flow have different time scales. In petroleum industry, one uses different very efficient simulators for the flow problem and the mechanical deformations, which enables to handle complex models. Therefore it is necessary to be able to combine as efficiently as possible the exploitation of these simulators. We propose two alternative splitting approaches. The first one is the staggered algorithm used by engineers, which amounts to a Gauss-Seidel method in the one phase linear case. The second approach is based upon the preconditioned conjugate gradient method. We use a numerical multi-scale method in both of these algorithms. We compare these two approaches and we show that the preconditioned conjugate gradient algorithm is faster and more robust than the staggered algorithm. Applying the preconditioned conjugate gradient algorithm therefore seems to compensate for the fact that the inf-sup condition for the mixed discretization method is not satisfied when combining the simulators for the mechanical deformations and for the flow computations.
ISSN: 1705-5105

Droits : http://creativecommons.org/licenses/by/
hal-01449039
https://hal.archives-ouvertes.fr/hal-01449039
https://hal.archives-ouvertes.fr/hal-01449039/document
https://hal.archives-ouvertes.fr/hal-01449039/file/DHLE.pdf

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
The lateral variation of the mechanical properties of continental lithosphere is an important factor controlling the localization of deformation and thus the deformation history and geometry of intraplate mountain belts. A series of three-layer lithospheric-scale analog models, with a strong domain (SD) embedded at various depths, are presented to investigate the development of topography and deformation patterns by having lateral heterogeneities within a weak continental lithosphere. The experiments, performed at a constant velocity and under normal gravity, indicate that the presence or absence of the SD controls whether deformation is localized or distributed at a lithospheric scale. Deformation and topography localize above the edges of the SD, while the SD region itself is characterized by minor amounts of surficial deformation and topography. The depth of the SD (within the ductile crust, ductile mantle lithosphere, or both) controls the pattern of deformation and thus the topography. The presence of a SD in the ductile crust or in the mantle results in limited surficial topographic effects but large variations in the Moho topography. Strong Moho deflection occurs when the SD is in the ductile crust, while the Moho remains almost flat when the SD is in the mantle. When the SD occupies the ductile lithosphere, the SD is tilted. These analog experiments provide insights into intraplate strain localization and could in particular explain the topography around the Tarim Basin, a lithospheric-scale heterogeneity north of the India-Asia collision zone.
ISSN: 0278-7407

hal-01172472
https://hal.archives-ouvertes.fr/hal-01172472
DOI : 10.1002/2014TC003756

Éditeur(s) : HAL CCSD American Physical Society
Résumé : International audience
We investigate a class of granular materials characterized by the possibility of interlocking between the particles. The interlocking is modeled by its effect through rolling resistance depending on relative rotation and normal force at the contact points and involving a single parameter analogous to the sliding friction coefficient. The model, which is introduced in the framework of the contact dynamics, method, is applied to simulate the simple shear of a large granular sample. We present a detailed analysis regarding the influence of rolling and sliding friction parameters on the macroscopic response in terms of shear strength, fabric properties, and force transmission. Interestingly, two distinct regimes can be distinguished in which the steady-state shear strength is controlled by either rolling resistance or sliding friction. The relative contributions of rolling and sliding contacts to the shear strength are consistent with the same two regimes. Interlocking strongly affects the force network by enhancing the arching effect and thus increasing the relative importance of weak contact forces and torques, which is reflected in a decreasing power-law probability distribution of the contact forces and torques below the mean. Due to the combined effect of friction and interlocking, the force-carrying backbone takes an increasingly columnar aspect involving a low fraction of particles. Our data suggest that the nature of the weak contact network is strongly affected by the formation of these columns of particles which do not need to be propped laterally. In particular, in the limit of high rolling resistance and sliding friction, the role of the weak network of contacts is no longer to prop the force chains, but, like the strong contact network, to actively sustain the deviatoric load imposed on the system.
ISSN: 1539-3755

hal-00412020
https://hal.archives-ouvertes.fr/hal-00412020
DOI : 10.1103/PhysRevE.78.021301

Résumé : La thèse est consacrée à la recherche des catastrophes marines (tsunamis, ondes de tempête) dans les Antilles françaises, en utilisant des modèles analytiques et numériques de mécanique des fluides. L'accent est mis sur le développement de modèles de mouvement de glissements de terrain et des vagues causées par ces glissements. Le modèle le plus simple du glissement de terrain «solide block» est utilisé pour évaluer les caractéristiques des flux pyroclastiques du volcan Soufrière-Hills (Montserrat). Un modèle plus complexe de modélisation de glissement de terrain (modèle de Savage-Hutter) a été étudié analytiquement, donnant ainsi une nouvelle famille de solutions exactes décrivant le mouvement de l'écoulement par gravité non linéaire dans une vallée ou dans un canyon sous-marin. Le modèle comprend des ondes simples (Riemann waves),le cas d'un barrage qui cède (dam-break problem), des solutions auto-similaires dans la M-fonne et « chapeaux paraboliques ». Grâce à la théorie linéaire de l'eau peu profonde nous avons étudié le processus de génération de tsunamis par des glissements de terrain de volume variable, se déplaçant à une vitesse variable dans un bassin de profondeur variable. Dans le cas d'un fond marin particulier (cas sans "réflexion"), les phénomènes de résonnance ont été étudiés dans un bassin à profondeur variable. Nous avons utilisé des méthodes numériques pour la résolution non-linéaire des équations des eaux peu profondes afin d'analyser des catastrophes marines réelles (les ondes de tempête causées par le cyclone Lili en 2002, le tsunami volcanique de 2003 à Montserrat) et probables (un tsunami prés des côtes de la Martinique). Des données sur les catastrophes
The dissertation is devoted to research in the field of marine natural hazards (tsunamis, storm surges) in the French West Indies, using analytical and numerical models of fluid mechanics. Emphasis is placed on the development of models of landslide motion and generated tsunami waves. The simple "solid block" model is used to evaluate the characteristics of pyroclastic flow Soufriere Hills volcano (Montserrat). The "fluid model" of a landslide (so called Savage-Hutter model) is studied analytically; within this model a new family of exact solutions that describe the motion of nonlinear gravity flow in a valley or underwater canyon is found: nonlinear Riemann wave, dan break problem, self-similar solutions (M - wave and parabolic cap). In the framework of the linear shallow water theory the process of generation of tsunami waves by landslides of variable volume moving with variable velocity above the basin of variable depth is studied. For the specific bottom profile ("reflectionless" one) the resonant phenomena is investigated in the basin of variable depth. Numerical methods are used to analyze marine hazards: historical (storm surges, caused by Cyclone LILI in 2002; volcanic tsunami 2003 on Montserrat) and possible events (possible tsunami of the coast of Martinique). Various data on marine natural disasters are obtained during field surveys (volcanic tsunami in 2003, stonn surges caused by Hurricane Dean in 2007). Designed catalogs of tsunamis and storm surges are created based on results of numerical modeling and field studies; some statistical analysis is perfomed

http://www.theses.fr/2011AGUY0435/document

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Xeno-estrogens, a class of endocrine disrupting chemicals (EDCs), can disturb estrogen receptor-dependent pathways involved in differentiation, proliferation or protection. Multiple methods have been developed to characterize the disturbances induced by EDCs in different cells or organs. In this study we have developed a new tool for the assessment of estrogenic compounds on differentiation. For this purpose we used the global model of NGF-induced neurite outgrowth of a pseudoneuronal PC12 cell line stably transfected with estrogen receptor alpha (PC12 ER). This new test evidences a new selectivity in which estradiol, genistein and 4-hydroxytamoxifen increased the NGF-induced neurite outgrowth of PC12 ER cells in a dose-dependent manner. In contrast, the strong estrogen agonist 17α-ethynylestradiol, the strong antagonist raloxifene and the agonist bisphenol A were unable to modify the neuritogenesis of PC12 ER cells. Therefore, the analysis of neuritogenesis in PC12 ER cells constitutes a complementary tool for the characterization of xeno-estrogen activity and also serves as a basis for further studies focusing on the mechanisms of EDCs in a neuronal context. Moreover, this test constitutes an alternative to animal testing.
ISSN: 0045-6535

hal-01063907
https://hal.archives-ouvertes.fr/hal-01063907
https://hal.archives-ouvertes.fr/hal-01063907/document
https://hal.archives-ouvertes.fr/hal-01063907/file/Differentiationsur PC12_cells_accepted.pdf
DOI : 10.1016/j.chemosphere.2014.03.101

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Analog sandbox models have been set up to study the impact of syntectonic erosion on thrust wedges with one and two decollement levels. Different accretion mechanisms are activated depending on interactions between surface processes and wedge mechanics: frontal accretion, backthrusting, underthrusting and underplating due to decollement induced duplex formation at depth. These mechanisms may function simultaneously, being located at different parts across the wedge. For all the experiments, a high friction is imposed at the base of models and the volume of eroded material remains equal to the volume of newly accreted material, maintaining a constant surface slope during the shortening. Erosion limits the forward propagation of thrust wedges and favors the underthrusting of basal layers allowing duplex formation. Erosion promotes development of major backthrusts in the thrust wedges without or with one decollement, but no backthrusts was formed in the wedges with two decollements. Slow erosion allows lower extent of basal underthrusting in comparison with regular-rate erosion. Variations in the erosion taper lead to changes in duplex geometry and exhumation rate in thrust wedges with one or two decollements. The 6 degrees erosion taper promotes formation of antiformal stack at the rear part of thrust wedge, high rate of basal underthrusting and high extent of erosional removal. The cover layers are nearly completely eroded above the antiformal stack and form the synformal klippe in frontal part of thrust wedges. The 8 degrees erosion taper allows development of individual ramp-anticlines and active forward thrusting of cover layers above the decollement and low rate of basal underplating below it, with consequent low extent of erosional removal. The results of our experiments support the observations on structural evolution and erosion in the Alberta Foothills of the Canadian Rockies.
ISSN: 0040-1951

hal-00617769
https://hal.archives-ouvertes.fr/hal-00617769
DOI : 10.1016/j.tecto.2011.01.020

Résumé : La connaissance des facteurs qui influent sur les populations de tiques et en particulier sur leurs distributions est un préalable indispensable à l’étude des maladies qu’elles transmettent. Parmi eux, l’importance des facteurs biotiques et en particulier celle de la compétition interspécifique est peu connue et souvent négligée. L’objectif de ce travail était d’évaluer le rôle de la compétition interspécifique sur la distribution de deux espèces de tiques d’importance vétérinaire, Amblyomma variegatum et A. hebraeum. Alors que seule A. variegatum favorise la transmission de la dermatophilose, une maladie de peau débilitante pour les ruminants, les deux espèces sont vectrices de la cowdriose, maladie due à une bactérie Ehrlichia ruminantium qui représente une contrainte économique majeure pour l’élevage. L’impact de l’espèce vectrice dans l’épidémiologie de la cowdriose (différences de souches circulantes, sévérité des cas,…) est inconnu bien qu’ayant potentiellement des conséquences en termes de surveillance (risque épidémiologique à l’introduction d’animaux) et de contrôle (développement de vaccin régional adapté aux souches circulantes) de la maladie. Ces deux espèces ont une distribution contiguë en Afrique australe avec peu de chevauchement (distribution parapatrique) suggérant une préférence environnementale différentielle ou une compétition exclusive entre elles. Une revue des données de la littérature a permis de mettre en évidence un chevauchement de leur niche trophique, climatique, et temporelle, et une interférence comportementale via la production de leurs phéromones. Les deux espèces pourraient donc rentrer en compétition directement par interférence communicative ou reproductive (hybridation stérile), ou indirectement via le partage de ressources, prédateurs ou pathogènes communs. Le rôle des facteurs biotiques et abiotiques sur le maintien de la parapatrie de ces deux espèces a été analysée (i) d’une part par la comparaison de leur niche environnementale réalisée en Afrique australe, et aux deux zones de contact au Zimbabwe et Mozambique, par des méthodes d’ordination et de modèles de niche (Maxent) ; (ii) et d’autre part par l’étude de leurs distributions et de leurs interactions (distribution sur les hôtes, croisements hétérospécifiques) dans la zone de contact au Mozambique. Globalement les résultats montrent qu’en Afrique Sud-Est et au Zimbabwe les deux espèces occupent des niches environnementales distinctes, celle d’A. hebraeum incluant des zones plus chaudes et plus sèches que celle d’A. variegatum. Au contraire au Mozambique les deux niches se chevauchent considérablement. L’enquête de terrain dans cette zone montre que les deux espèces y sont moins souvent trouvées en sympatrie que les données prédites, suggérant une distribution en partie déterminée par des interactions biotiques. Dans les rares sites avec présence des deux espèces, A. variegatum et A. hebraeum partagent les mêmes sites de fixation sur les animaux et forment un pourcentage relativement élevé de couples hétérospécifiques. Ce pourcentage, bien que similaire entre les femelles A. variegatum et A. hebraeum, semble impliquer des processus de discrimination spécifique propres aux deux espèces intervenant au niveau de l’agrégation, de la fixation et du contact des individus. Nos résultats suggèrent l’existence d’une compétition exclusive entre les deux espèces, due à une compétition sexuelle probablement associée à une compétition indirecte. La frontière parapatrique semble occuper une position stable le long d’un gradient environnemental au Zimbabwe mais pas au Mozambique. Les conditions entrainant la coexistence ou l’exclusion des deux espèces avec formation d’une frontière parapatrique sont discutés à l’aide de modèles théoriques de compétition.
Studying the factors that influence tick populations and their distributions is an essential pre-requisite to understanding the dynamics of the diseases they transmit. The relative importance of biotic factors such as interspecific competition is not well known and often neglected. The objective of this study was to assess the influence of interspecific competition on the distribution of two tick species of veterinary importance, Amblyomma variegatum and A. hebraeum. Whereas only A. variegatum is known to favor dermatophilosis, a debilitating skin disease of ruminants, both species are good vectors of Ehrlichia ruminantium, the bacteria causing heartwater, a fatal disease of ruminants that presents a major constraint for livestock development in Africa. The impact of vector species in heartwater epidemiology (differences of circulating strains, severity of clinical cases…) is poorly known but may have important implications for surveillance (epidemiological risk of imported animals) and control (adapting regional vaccine programs to circulating strains) of the disease. These two ticks have abutting and marginally overlapping (i.e. parapatric) distributions in southern Africa, suggesting either differential environmental preferences or exclusive competition between the two species. A review of published data highlighted an important overlap of their trophic, climatic and seasonal niche, and existence of chemical behavior interference through pheromone production. Therefore, the two species might compete either directly by communicative or reproductive interference (sterile hybridization), or indirectly by sharing the same resources, predators or pathogens. The role of biotic and abiotic factors in determining parapatry of these species was assessed by (i) comparing their realized environmental niche in southern Africa, and at contact zones in Zimbabwe and Mozambique, using ordination techniques and environmental niche modeling (Maxent); (ii) studying their distributions and their interactions (distribution on co-infested host, heterospecific mating) at the contact zone in Mozambique. Globally, the results indicated the two species occupied distinctly different environmental niches in southern Africa and at the contact zone in Zimbabwe, with the niche of A. hebraeum including both hotter and drier areas than that of A. variegatum. However, in Mozambique their niches overlapped considerably. Field studies within this zone showed that sympatry was observed less frequently than predicted by niche models, suggesting an importance of biotic interactions. At the rare sites where both species were present, A. variegatum and A. hebraeum were observed to share the same preference sites on hosts and formed a high percentage of heterospecific pairs. Though this cross-mating rate was not significantly different between A. variegatum and A. hebraeum females, our observations suggest different mechanism of species discrimination involved for the two species acting at the aggregation, fixation and partner contact level. Our results strongly suggest exclusive competition between these species may arise from sexual competition probably interacting with other indirect forms of competition. The parapatric boundary apparently occupies a stable location along an environmental gradient at the contact zone in Zimbabwe but not in Mozambique. Conditions inducing coexistence or exclusion of both species with the formation of parapatric distributions are discussed in relation to theoretical models of competition. When sexual competition is introduced in these models, the relative frequency of two species is determined by their endogenous fitness (a function of environmental conditions), density dependent effects of competitive interactions, historical distributions and dispersal rates: survival of the first prevails when the immigration rate of a fitter invading species remains lower than an invasion threshold.

http://www.theses.fr/2014AGUY0705/document

Éditeur(s) : Gauthier-Villars
Résumé : Long tropical instability waves are described at around 3-4 degrees N based on results of a simulation performed with a general circulation model for the Atlantic Ocean. This description is in agreement with earlier observations of organized undulations of the summer thermal front associated with anti-cyclonic eddies propagating westward at 30-40 km/day along 3-4 degrees N from 10 to 40 degrees W through the Atlantic basin. However, the simulation indicated the presence of long waves in early boreal winter. In this respect, satellite observations during short cold events in winter show thermal front undulations similar to those associated with long wave propagations. The simulation clearly demonstrated large vertical movements between the surface and a depth of 70 m, associated with anti-cyclonic eddies at around 3 degrees N. These vertical movements could commonly reach the thermocline in the central part of the Atlantic basin (10-20 degrees W). In this region, long instability waves could subsequently affect biological production by ''eddy pumping''. During the PIRAL cruise at 4 degrees N-20 degrees W in June 1986, remarkably high chlorophyll concentrations (the highest values in our data bank for the equatorial Atlantic and typical of a very productive zone) were associated with currents similar to those of an anticyclonic eddy and characterized by a surface temperature distribution typical of the long instability wave pattern. These high chlorophyll concentrations may have resulted from ''eddy pumping'' and/or strong meridian advection since each of these mechanisms is associated with long instability waves.
Oceanologica Acta (0399-1784) (Gauthier-Villars), 1994 , Vol. 17 , N. 6 , P. 585-596

Droits : info:eu-repo/semantics/openAccess
http://archimer.ifremer.fr/doc/00099/21034/18660.pdf
http://archimer.ifremer.fr/doc/00099/21034/