Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Recent research has demonstrated the importance of dermal exposure for some semivolatile organic compounds (SVOCs) present in the gas phase of indoor air. Though models for estimating dermal intake from gaseous SVOCs exist, their predictions can be subject to variations in input parameters, which can lead to large variation in exposure estimations. In this sensitivity analysis for a steady state model, we aimed to assess these variations and their determinants using probabilistic Monte Carlo sampling for 8 SVOCs from different chemical families: phthalates, bisphenols, polycyclic aromatic hydrocarbons (PAHs), organophosphorus (OPs), organochlorines (OCs), synthetic musks, polychlorinated biphenyls (PCBs) and polybromodiphenylethers (PBDEs). Indoor SVOC concentrations were found to be the most influential parameters. Both Henry's law constant (H) and octanol/water partition coefficient (Kow) uncertainty also had significant influence. While exposure media properties such as volume fraction of organic matter in the particle phase (fom-part), particle density (ρpart), concentration ([TSP]) and transport coefficient (ɣd) had a slight influence for some compounds, human parameters such as body weight (W), body surface area (A) and daily exposure (t) make a marginal or null contribution to the variance of dermal intake for a given age group. Inclusion of a parameter sensitivity analysis appears essential to reporting uncertainties in dermal exposure assessment.
ISSN: 0160-4120

hal-01635769
https://hal.archives-ouvertes.fr/hal-01635769
https://hal.archives-ouvertes.fr/hal-01635769/document
https://hal.archives-ouvertes.fr/hal-01635769/file/Pelletier%202017%20Dermal%20expo%20rev2.pdf
DOI : 10.1016/j.envint.2017.02.005

Éditeur(s) : HAL CCSD
Résumé : Different applications of linear elasticity in structural geology are presented in this thesis through the development of three types of numerical computer codes. The first one uses forward modeling to study displacement and perturbed stress fields around complexly faulted regions. We show that incorporating inequality constraints, such as static Coulomb friction, enables one to explain the angle of initiation of jogs in extensional relays. Adding heterogeneous material properties and optimizations, such as parallelization on multicore architectures and complexity reduction, admits more complex models. The second type deals with inverse modeling, also called parameter estimation. Linear slip inversion on faults with complex geometry, as well as paleo-stress inversion using a geomechanical approach, are developed. The last type of numerical computer code is dedicated to restoration of complexly folded and faulted structures. It is shown that this technique enables one to check balanced cross-sections, and also to retrieve fault chronology. Finally, we show that this code allows one to smooth noisy 3D interpreted faulted and folded horizons using geomechanics.
Différentes applications de l'élasticité linéaire en géologie structurale sont présentées dans cette thèse à travers le développement de trois types de codes numériques. Le premier utilise la modélisation directe pour étudier les déplacements et champs de contraintes autour de zones faillées complexes. On montre que l'ajout de contraintes inégalitaires, telles que la friction de Coulomb, permet d'expliquer l'angle d'initiation des dominos dans les relais extensifs. L'ajout de matériaux hétérogènes et d'optimisations, telles la parallélisation sur processeurs multi-coeurs ainsi que la réduction de complexité des modèles, permettent l'étude de modèles beaucoup plus complexes. Le second type de code numérique utilise la modélisation inverse, aussi appelée estimation de paramètres. L'inversion linéaire de déplacements sur les failles ainsi que la détermination de paléo-contraintes utilisant une approche géomécanique sont développées. Le dernier type de code numérique concerne la restauration de structures complexes plissées et faillées. Il est notamment montré qu'une telle méthode permet de vérifier l'équilibre de coupes géologiques, ainsi que de retrouver la chronologie des failles. Finalement, nous montrons que ce même code permet de lisser des horizons 3D faillés, plissés et bruités en utilisant la géomécanique.
https://tel.archives-ouvertes.fr/tel-00537899

tel-00537899
https://tel.archives-ouvertes.fr/tel-00537899
https://tel.archives-ouvertes.fr/tel-00537899/document
https://tel.archives-ouvertes.fr/tel-00537899/file/thesemaerten.pdf

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The full numerical simulation of turbulent flows in the context of industrial applications remains a very challenging problem. One of the difficulties is the presence of a large number of interacting scales of different orders of magnitude, ranging from the macroscopic scale to the Kolmogorov dissipation scale. In order to better understand and simulate these interactions, new algorithms of incremental type have recently been introduced, stemming from the theory of infinite-dimensional dynamical systems (see, e.g., the algorithms of Foias, Jolly et al. (1988), Foias, Manley and Temam (1988), Laminie et al. (1993, 1994), Marion and Temam (1989, 1990), and Temam (1990)). These algorithms are based on decompositions of the unknown functions into a large- and a small-scale component, one of the underlying ideas being to approximate the corresponding attractor. In the context of finite element methods, the decomposition of a solution into small- and large-scale components appears when we consider hierarchical bases (Yserentant, 1986; Zienkiewicz et al., 1982). In the present article we derive several estimates of the size of the structures for the linear and nonlinear terms which correspond to interactions of different hierarchical components of the velocity field, and also their time variation. The one-step time variation of these terms can be smaller than the expected accuracy of the computation. Using this remark, we implement an adaptive spatial and temporal multilevel algorithm which treats differently the small- and large-scale components of the flow. We derive several a priori estimates in order to study the perturbation introduced into the approximated equations. All the interaction terms between small- and large-scale structures are frozen during several time steps. Finally, we implement the multilevel method in order to simulate a bidimensional flow described by the Burgers equations. We perform a parametric study of the procedure and its efficiency. The gain in CPU time is significant and the trajectories computed by our multi-scale method remain close to the trajectories obtained with the classical Galerkin method.
ISSN: 0168-9274

hal-00730710
https://hal.archives-ouvertes.fr/hal-00730710

Éditeur(s) : Elsevier
Résumé : In biological modelling of the coastal phytoplankton dynamics, the light attenuation coefficient is often expressed as a function of the concentrations of chlorophyll and mineral suspended particulate matter (SPM). In order to estimate the relationship between these parameters over the continental shelf of the northern Bay of Biscay, a set of in situ data has been gathered for the period 1998-2003 when SeaWiFS imagery is available. These data comprise surface measurements of the concentrations of total SPM, chlorophyll, and irradiance profiles from which is derived the attenuation coefficient of the photosynthetically available radiation, K-PAR. The performance of the IFREMER look-up table used to retrieve the chlorophyll concentration from the SeaWiFS radiance is evaluated on this new set of data. The quality of the estimated chlorophyll concentration is assessed from a comparison of the variograms of the in situ and satellite-derived chlorophyll concentrations. Once the chlorophyll concentration is determined, the non living SPM, which is defined as the SPM not related to the dead or alive endogenous phytoplankton, is estimated from the radiance at 555 nm by inverting a semi-analytic model. This method provides realistic estimations of concentrations of chlorophyll and SPM over the continental shelf all over the year. Finally, a relationship, based on non living SPM and chlorophyll, is proposed to estimate K-PAR on the continental shelf of the Bay of Biscay. The same formula is applied to non living SPM and chlorophyll concentrations, observed in situ or derived from SeaWiFS radiance.
Remote Sensing of Environment (0034-4257) (Elsevier), 2005-03 , Vol. 95 , N. 1 , P. 29-46

Droits : 2004 Elsevier Inc. All rights reserved
http://archimer.ifremer.fr/doc/2005/publication-1172.pdf
DOI:10.1016/j.rse.2004.11.007
http://archimer.ifremer.fr/doc/00000/1172/

Éditeur(s) : HAL CCSD Institute of Electrical and Electronics Engineers
Résumé : International audience
The state-space modeling of partially observed dynamical systems generally requires estimates of unknown parameters. The dynamic state vector together with the static parameter vector can be considered as an augmented state vector. Classical filtering methods, such as the extended Kalman filter (EKF) and the bootstrap particle filter (PF), fail to estimate the augmented state vector. For these classical filters to handle the augmented state vector, a dynamic noise term should be artificially added to the parameter components or to the deterministic component of the dynamical system. However, this approach degrades the estimation performance of the filters. We propose a variant of the PF based on convolution kernel approximation techniques. This approach is tested on a simulated case study.
ISSN: 0018-9251

inria-00459886
https://hal.inria.fr/inria-00459886
DOI : 10.1109/TAES.2009.5259183

Éditeur(s) : HAL CCSD Institute of Electrical and Electronics Engineers (IEEE)/Optical Society of America(OSA)
Résumé : International audience
Nanometric displacement measurements by Extrinsic Fiber Fabry-Perot interferometers (EFPI) is extremely susceptible to external environmental changes. Temperature, in particular, has a remarkable influence on the optical power and wavelength of the laser diode in use, in addition to the thermal expansion of the mechanical structure. In this paper we propose an optimization of the EFPI sensor in order to use it for very long-term (more than one year) and for high-precision displacement measurements. For this purpose, a real time and adaptive estimation procedure based on a homodyne technique and a Kalman filter is established. During a sinusoidal laser diode current modulation, the Kalman filter provides a correction of the amplitude drift caused by the resultant optical power modulation and external perturbations. Besides, stationary temperature transfer operators are estimated via experimental measurements to reduce the additive thermal noise induced in the optical phase and mechanical components.
ISSN: 0733-8724

hal-00876339
https://hal.archives-ouvertes.fr/hal-00876339
DOI : 10.1109/JLT.2012.2194476

Éditeur(s) : HAL CCSD
Résumé : Modern measures of diversity satisfy reasonable axioms, are parameterized to produce diversity profiles, come with an effective number of species to simplify their interpretation, and estimators to apply them to real data. Generalized Simpson's entropy has all of these features and can be used as a measure of biodiversity. Moreover, unlike most commonly used diversity indices, it has unbiased estimator, which allows for robust estimation of the diversity of poorly sampled, rich communities.
https://hal-agroparistech.archives-ouvertes.fr/hal-01276738

hal-01276738
https://hal-agroparistech.archives-ouvertes.fr/hal-01276738
https://hal-agroparistech.archives-ouvertes.fr/hal-01276738/document
https://hal-agroparistech.archives-ouvertes.fr/hal-01276738/file/GSimpson.pdf

Éditeur(s) : HAL CCSD MDPI
Résumé : International audience
LiDAR (Light Detection And Ranging) remote sensing has been shown to be a good technique for the estimation of forest parameters such as canopy heights and above ground biomass. Whilst airborne LiDAR data are in general very dense but only available over small areas due to the cost of their acquisition, spaceborne LiDAR data acquired from the Geoscience Laser Altimeter System (GLAS) have a coarser acquisition density associated with a global cover. It is therefore valuable to analyze the integration relevance of canopy heights estimated from LiDAR sensors with ancillary data such as geological, meteorological, and phenological variables in order to propose a forest canopy height map with good precision and high spatial resolution.In this study, canopy heights extracted from both airborne and spaceborne LiDAR, were first extrapolated from available environmental data (e.g. geology, slope, vegetation indices, etc.). The estimated canopy height maps using random forest (RF) regression from the airborne or GLAS calibration datasets showed similar precisions (RMSE better than 6.5 m). In order to improve the precision of the canopy height estimates regression-kriging (kriging of random forest regression residuals) was used. Results indicated an improvement in the RMSE (decrease from 6.5 to 4.2 m) for the regression-kriging maps from the GLAS dataset, and from 5.8 to 1.8 m for the regression-kriging map from the airborne LiDAR dataset. Finally, in order to investigate the impact of the spatial sampling of future LiDAR missions on the precision of canopy height estimates, six subsets were derived from the initial airborne LiDAR dataset with flight line spacing of 5, 10, 20, 30, 40 and 50 km (corresponding to 0.29, 0.11, 0.08, 0.05, 0.04, and 0.03 points/km² respectively). Results indicated that using the regression-kriging approach achieved a precision of 1.8 m on the canopy height map with flight line spacing of 5 km and achieved an average RMSE of 4.8m for the configuration for the 50 km flight line spacing.
ISSN: 2072-4292

hal-01361343
https://hal.archives-ouvertes.fr/hal-01361343
https://hal.archives-ouvertes.fr/hal-01361343/document
https://hal.archives-ouvertes.fr/hal-01361343/file/mt2016-pub00048036.pdf
DOI : 10.3390/rs8030240

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
AbstractBackground The intensive use of chlordecone (an organochlorine insecticide) in the French West Indies until 1993 resulted in a long-term soil and water contamination. Chlordecone has known hormonal properties and exposure through contaminated food during critical periods of development (gestation and early infancy) may affect growth. Objectives We aimed to assess the impact of prenatal and postnatal exposure to chlordecone on the growth of children from the TIMOUN mother–child cohort. Methods Chlordecone was determined in cord plasma at birth (N=222) and in breast milk samples (at 3 months). Dietary chlordecone intake was estimated at 7 and 18 months, with food-frequency questionnaires and food-specific contamination data. Anthropometric measurements were taken at the 3-, 7- and 18-month visits and measurements reported in the infants' health records were noted. Structured Jenss–Bayley growth models were fitted to individual height and weight growth trajectories. The impact of exposure on growth curve parameters was estimated directly with adjusted mixed non-linear models. Weight, height and body mass index (BMI), and instantaneous height and weight growth velocities at specific ages were also analyzed relative to exposure. Results Chlordecone in cord blood was associated with a higher BMI in boys at 3 months, due to greater weight and lower height, and in girls at 8 and 18 months, mostly due to lower height. Postnatal exposure was associated with lower height, weight and BMI at 3, 8 and 18 months, particularly in girls. Conclusion Chlordecone exposure may affect growth trajectories in children aged 0 to 18 months
ISSN: 0013-9351

hal-01169790
https://hal-univ-rennes1.archives-ouvertes.fr/hal-01169790
DOI : 10.1016/j.envres.2015.06.023
PUBMED : 26133809

Éditeur(s) : HAL CCSD Société Géologique de France
Résumé : Based on a High-Resolution 3D seismic block acquired in the Gulf of Lion in 2004–2005 we investigated fluid pipes and pockmarks on the top of the interfluve between the Hérault canyon and the Bourcart canyon both created by turbidity currents and gravity flows from the shelf to the deep basin in the north-western Mediterranean Sea. Combining the geometry of the potential fluid pipes with the induced deformation of surrounding sediments leads then to the ability to differentiate between potential fluid sources (root vs source) and to better estimate the triggering mechanisms (allochtonous vs. autochtonous cause). We linked together a set of derived attributes, such as Chaos and RMS amplitude, to a 3D description of pipes along which fluids may migrate. As previously shown in other basins, the induced deformation, creating cone in cone or V-shaped structures, may develop in response to the fluid pipe propagation in unconsolidated sediments in the near surface. The level at the top of a cone structure is diachronous. It means that stratigraphic levels over this surface are deformed at the end of the migration. They collapse forming a depression called a pockmark. These pipes are the result of repeated cycles of fluid expulsion that might be correlated with rapid sea-level rise instead of sediment loading. The most recent event (MIS 2.2 stage) has led to the formation of a pockmark on the modern seafloor. It has been used as a reference for calculating the effect of a rapid sea-level rise on fluid expulsion. As all physical and geometrical parameters are constrained, we were able to define that a + 34 m of sea level rise may account for triggering fluid expulsion from a very shallow silty-sandy layer at 9 m below seafloor since the last glacial stage. This value is consistent with a sea level rise of about 102 m during this period. This study shows that the episodic nature of fluid release resulted from hydromechanical processes during sea-level rise due to the interactivity between high pressure regimes and principal in situ stresses.
ISSN: 0037-9409

hal-01667241
https://hal.archives-ouvertes.fr/hal-01667241
DOI : 10.1051/bsgf/2017190

Résumé : Les forêts tropicales contiennent dans leur biomasse aérienne un stock de carbone important à l’échelle de la planète. Mesurer ce stock et comprendre son fonctionnement permet de mieux saisir les enjeux liés à sa protection, sa destruction ou sa modification, ainsi que son rôle dans le cycle du carbone et les mécanismes climatiques globaux. Dans le cadre des problématiques économiques et écologiques liés au climat, les forêts sont progressivement prises en compte dans les programmes internationaux de mesures visant à réduire l’impact anthropique sur le climat (Protocole de Kyoto, 1998 ; Accord de Copenhague, 2009). L’intégration des forêts dans les mécanismes financiers liés au marché du carbone est clairement envisagée dans les années à venir (marché de carbone « d’origine forestière »).L’estimation de la biomasse aérienne d’une parcelle de forêt inventoriée nécessite l’utilisation successive de plusieurs modèles. Dans ces parcelles, le diamètre et l’espèce de chaque arbre sont renseignés. Ensuite, ces parcelles sont utilisées comme références pour l’extrapolation spatiale des valeurs de biomasse. Cette extrapolation repose souvent sur le traitement de signaux aériens (avions, satellites). Il est aussi possible d’utiliser covariables environnementales (climat, géologie, …).L’incertitude associée à l’estimation de la biomasse d’une région est le résultat de toutes les incertitudes associées à ces différents processus. Les connaissances actuelles ne nous permettent pas de quantifier cette incertitude. L’objectif de la thèse est de développer une méthodologie d’estimation de la biomasse qui permette la propagation des incertitudes ainsi que l’identification des sources de cette incertitude.Modèle de hauteur : Nous proposons un nouveau modèle de hauteur pour les forêts tropicales. Les paramètres de ce modèle ont un sens écologique et peuvent être prédits par des variables décrivant le peuplement sur lequel il est appliqué. Nous avons utilisé les données des projets Amalin et Bridge et sélectionné 42 parcelles réparties en Guyane dans lesquelles le diamètre et la hauteur de chaque arbre ont été mesurés.Modèle de densité de bois : Un modèle à été conçu pour associer à chaque espèce une distribution de densité de bois et non une valeur fixe. Nous avons utilisé les données du projet Bridge dans lequel la densité de bois a été mesurée sur 2504 arbres représentant 466 espèces.Modèle de biomasse: Nous avons montré par une analyse de sensibilité que les incertitudes des prédictions de hauteur et de densité de bois n’avaient qu’une part négligeable dans l’incertitude des prédictions de biomasse. L’amélioration de la précision de ces modèles n’est donc pas une priorité. En revanche, le modèle de hauteur peut être une source de biais.Modélisation spatiale : Les modèles développés ont été appliqués à différents réseaux de parcelles couvrant bien la zone littorale guyanaise : inventaires papetiers de l’ONF, réseau Guyafor, projet Amalin… Les prédictions de biomasse de ces parcelles sont utilisées dans un modèle spatiale. Nous produisons ainsi une carte de biomasse guyanaise associée à une carte de l’incertitude de cette estimation.
Tropical forest yield and important part of the aerial vegetation carbon stock on earth. Measuring and understanding this stock distribution is crucial for the management of the tropical forests facing the actual environmental challenges (REDD+, carbon market).Aerial Biomass estimation of forest census plots requires few models depending on the precision of the inventory: diameter models, height models, wood density models. Spatial extrapolation between census plots relies on aerial data (satellite measurements, images) or ground-based data (geology, altitude).The uncertainty of the estimation of a region’s biomass is the result of the uncertainty brought by all these models. The aim of the thesis is to develop models and methods to estimate the biomass of a region while propagating the uncertainties. This is applied to the neo-tropical forest of French Guiana (South America, Guianas Plateau).

http://www.theses.fr/2012AGUY0567/document

Éditeur(s) : HAL CCSD
Résumé : International audience
Multiple chemicals are emitted in residential accommodation. Aggregate Daily Doses (ADD) (ng/kg-bw/d) were estimated for 32 semivolatile organic compounds (SVOCs) of different chemical families that are frequently detected in French dwellings in both air and settled dust. Daily doses were determined using steady-state models for the population, categorized into 11 age groups covering birth to age 30. Three routes of exposure were taken into account: dust ingestion, inhalation (gaseous and particulate phases) and dermal contact with the gaseous phase of air. Contamination levels were preferentially retrieved from large, nationwide representative datasets. A two-dimensional probabilistic approach was used to assess parametric uncertainty and identify the most influential factors. For children aged 2 to 3 years, ADD estimates spanned orders of magnitude, with median values ranging from 8.7 pg/kg-bw/d for 2,2′,3,4,4′-pentabromodiphenylether (BDE 85) to 1.3 μg/kg-bw/d for di-isobutyl phthalate (DiBP). Inhalation, ingestion and dermal pathway contributed at varying levels, and depending on compound, air was the dominant medium for 28 of the 32 compounds (either by inhalation or dermal contact). Indoor exposure estimate variance was mainly driven by indoor contamination variability, and secondarily by uncertainty in physical and chemical parameters. These findings lend support to the call for cumulative risk assessment of indoor SVOCs. © 2017 Elsevier Ltd
ISSN: 01604120

hal-01616433
https://hal-univ-rennes1.archives-ouvertes.fr/hal-01616433
DOI : 10.1016/j.envint.2017.08.024
PUBMED : 28950160

Éditeur(s) : HAL CCSD
Résumé : In this paper we report a study of the mating system and gene flow of Sextonia rubra, a hermaphroditic, insect pollinated tropical tree species with a geographic distribution in the Guyana Plateau and the Amazon. Using five microsatellites we analysed 428 seeds of 27 open pollinated families at the experimental site "Paracou" in French Guiana. We observed, compared to other tropical tree species, a high level of genetic diversity. We estimated parameters of the mating system and gene flow by using the mixed mating model and the TwoGenerapproach. The estimated multilocus outcrossing rate, tm, was 0.992 indicating nearly complete outcrossing. A significant level of biparental inbreeding and a small proportion of full-sibs were estimated for the 27 seed arrays. The differentiation of allelic frequencies among the pollen pools was ΦFT = 0.061. We estimated mean pollen dispersal distances between 65 m and 89 m according to the dispersal models used. The joint estimation of pollen dispersal and density of reproductive trees gave an effective density estimate of 2.1-2.2 trees/ha
Silvae genetica

hal-01031483
https://hal.archives-ouvertes.fr/hal-01031483

Éditeur(s) : HAL CCSD BioMed Central
Résumé : International audience
UNLABELLED: ABSTRACT: BACKGROUND: Malaria is a major health issue in French Guiana. Amerindian communities remain the most affected. A previous study in Camopi highlighted the predominant role of environmental factors in the occurrence of malaria. However, all parameters involved in the transmission were not clearly identified. A new survey was conducted in order to clarify the risk factors for the presence of malaria cases in Camopi. METHODS: An open cohort of children under seven years of age was set up on the basis of biologically confirmed malaria cases for the period 2001-2009. Epidemiological and observational environmental data were collected using two structured questionnaires. Data were analysed with a multiple failures multivariate Cox model. The influence of climate and the river level on malaria incidence was evaluated by time-series analysis. Relationships between Anopheles darlingi human biting rates and malaria incidence rates were estimated using Spearman's rank correlation. RESULTS: The global annual incidence over the nine-year period was 238 per 1,000 for Plasmodium falciparum, 514 per 1,000 for Plasmodium visa and 21 per 1,000 for mixed infections. The multivariate survival analysis associated higher malaria incidence with living on the Camopi riverside vs. the Oyapock riverside, far from the centre of the Camopi hamlet, in a home with numerous occupants and going to sleep late. On the contrary, living in a house cleared of all vegetation within 50 m and at high distance of the forest were associated with a lower risk. Meteorological and hydrological characteristics appeared to be correlated with malaria incidence with different lags. Anopheles darlingi human biting rate was also positively correlated to incident malaria in children one month later. CONCLUSIONS: Malaria incidence in children remains high in young children despite the appearance of immunity in children around three years of age. The closeness environment but also the meteorological parameters play an important role in malaria transmission among children under seven years of age in Camopi.
ISSN: 1475-2875

inserm-00633771
http://www.hal.inserm.fr/inserm-00633771
http://www.hal.inserm.fr/inserm-00633771/document
http://www.hal.inserm.fr/inserm-00633771/file/1475-2875-10-246.pdf
DOI : 10.1186/1475-2875-10-246

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
We investigate upper mantle anisotropy beneath the Pyrenean range along three N-S profiles across the mountain belt. The results of a first profile that operated in 1993 in the central part of the belt have been presented elsewhere. We present the results of two other profiles that ran in 1995-1996 and 1996-1997 in the eastern and western part of the belt, respectively and propose an interpretation of the whole results. Teleseismic shear waves (SKS, SKKS, and PKS) are used to determine splitting parameters: the fast polarization direction φ and the delay time δt. Teleseismic shear wave splitting in the eastern Pyrenees displays homogeneous φ values trending N100°E and δt values in the range 1.1 to 1.5 s. A station located in the southern Massif Central, 100 km north of the range, is characterized by different splitting parameters (φ = N70°E, δt = 0.7 s). In the western part of the belt, anisotropy parameters are similar across the whole belt (φ = N110°E and δt = 1.3 to 1.5 s). Most of the measured delay times, including those obtained in the central part of the range, are above the global average of the SKS splitting (around 1 s). At the belt scale, φ is generally poorly correlated with recent estimations of the absolute plate motion, which predicts a fast direction ranging between N50°E and N80°E. Instead, the orientation of φ (N100°E) is parallel to the trend of the Pyrenean belt but also to Hercynian preexisting structures. This parallelism supports an anisotropy primarily related to frozen or active lithospheric structures. We show that a signature related to the Pyrenean orogeny is likely for the stations located in the internal domains of the belt. By contrast, the anisotropy measured at the stations located on the external parts of the belt could reflect a pre-Pyrenean (Hercynian) deformation. We suggest that a late Hercynian strike-slip deformation is responsible for this frozen upper mantle anisotropy and that the Pyrenean tectonic fabric developped parallel to this preexisting fabric. Finally, no particularly strong splitting is related to the North Pyrenean Fault, commonly believed to represent the plate boundary between Iberia and Eurasia.
ISSN: 2169-9313

hal-01388841
http://hal.univ-reunion.fr/hal-01388841
http://hal.univ-reunion.fr/hal-01388841/document
http://hal.univ-reunion.fr/hal-01388841/file/Barruol_Aniso_Pyr_JGR1998.pdf
DOI : 10.1029/98JB02790

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
Rifting in a cratonic lithosphere is strongly controlled by several interacting processes including crust/mantle rheology, magmatism, inherited structure and stress regime. In order to better understand how these physical parameters interact, a 2 yr long seismological experiment has been carried out in the North Tanzanian Divergence (NTD), at the southern tip of the eastern magmatic branch of the East African rift, where the southward-propagating continental rift is at its earliest stage. We analyse teleseismic data from 38 broad-band stations ca. 25 km spaced and present here results from their receiver function (RF) analysis. The crustal thickness and Vp/Vs ratio are retrieved over a ca. 200 × 200 km2 area encompassing the South Kenya magmatic rift, the NTD and the Ngorongoro-Kilimanjaro transverse volcanic chain. Cratonic nature of the lithosphere is clearly evinced through thick (up to ca. 40 km) homogeneous crust beneath the rift shoulders. Where rifting is present, Moho rises up to 27 km depth and the crust is strongly layered with clear velocity contrasts in the RF signal. The Vp/Vs ratio reaches its highest values (ca. 1.9) beneath volcanic edifices location and thinner crust, advocating for melting within the crust. We also clearly identify two major low-velocity zones (LVZs) within the NTD, one in the lower crust and the second in the upper part of the mantle. The first one starts at 15–18 km depth and correlates well with recent tomographic models. This LVZ does not always coexist with high Vp/Vs ratio, pleading for a supplementary source of velocity decrease, such as temperature or composition. At a greater depth of ca. 60 km, a mid-lithospheric discontinuity roughly mimics the step-like and symmetrically outward-dipping geometry of the Moho but with a more slanting direction (NE–SW) compared to the NS rift. By comparison with synthetic RF, we estimate the associated velocity reduction to be 8–9 per cent. We relate this interface to melt ponding, possibly favouring here deformation process such as grain-boundary sliding (EAGBS) due to lithospheric strain. Its geometry might have been controlled by inherited lithospheric fabrics and heterogeneous upper mantle structure. We evidence that crustal and mantle magmatic processes represent first order mechanisms to ease and locate the deformation during the first stage of a cratonic lithospheric breakup.
ISSN: 0956-540X

hal-01622078
https://hal.archives-ouvertes.fr/hal-01622078
https://hal.archives-ouvertes.fr/hal-01622078/document
https://hal.archives-ouvertes.fr/hal-01622078/file/plasmanGJI2017.pdf
DOI : 10.1093/gji/ggx177

Éditeur(s) : Elsevier Sci Ltd
Résumé : A multi-scale global hindcast of ocean waves is presented that covers the years 1994-2012, based on recently published parameterizations for wind sea and swell dissipation [Ardhuin, F., Rogers, E., Babanin, A., Filipot, J.-F., Magne, R., Roland, A., van der Westhuysen, A., Queffeulou, P., Lefevre, J.-M., Aouf, L., Collard, F., 2010. Semi-empirical dissipation source functions for wind-wave models: Part I. Definition, calibration and validation. J. Phys. Oceanogr. 40 (9), 1917-1941]. Results from this hindcast include traditional wave parameters, like the significant wave height and mean periods, and we particularly consider the accuracy of the results for phenomenal sea states, with significant heights above 14 m. Using unbiased winds, there is no evidence of a bias in wave heights even for this very high range. Various spectral moments were also validated, including the surface Stokes drift and mean square slopes that are relevant for wave-current interactions modelling and remote sensing, and also spectra of seismic noise sources. The estimation of these parameters is made more accurate by the new wave growth and dissipation parameterizations. Associated air-sea fluxes of momentum and energy are significantly different from what is obtained with the WAM-Cycle 4 parameterization, with a roughness that is practically a function of wind speed only. That particular output of the model does not appear very realistic and will require future adjustments of the generation and dissipation parameterizations.
Ocean Modelling (1463-5003) (Elsevier Sci Ltd), 2013-10 , Vol. 70 , P. 174-188

Droits : 2012 Elsevier Ltd. All rights reserved.
http://archimer.ifremer.fr/doc/00155/26582/25477.pdf
DOI:10.1016/j.ocemod.2012.12.001
http://archimer.ifremer.fr/doc/00155/26582/

Éditeur(s) : HAL CCSD
Résumé : In order to minimize CO2 atmospheric concentration, a solution consists in sequestrating CO2 in geological reservoirs. To estimate long term risks, it is necessary to quantify the couplings between reaction processes as well as structural and hydrodynamical modifications. We realised two experimental benches enabling injecting CO2-enriched-brine in conditions corresponding to in situ storage (T < 200 oC and P < 200 bar) and developed
an experimental protocol using X-Ray microtomography and fluid and rock analyses in order to measure the variations of physical and chemical parameters.
The study of carbonated reservoirs near the injection well, allows quantifying different k-phi relationships depending on the dissolution processes and triggered by the local fluid chemical composition and initials conditions. Away from the injection well, we observe carbonate precipitation decreasing the permeability. The study of fracturated caprock samples shows that alternative percolation of CO2-enriched-brine and CO2 gas increases the fracture permeability.
The study of silicated rocks indicates carbonate precipitation in zeolite sandstone and sintered dunite grains. Nevertheless, in zeolite sandstone we also observe the precipitation of clay particles located in the uid pathways which decrease strongly the permeability.
Afin de minimiser la concentration en CO2 dans l'atmosphère une solution consiste à le séquestrer dans les réservoirs géologiques. Pour évaluer les risques à long terme, il est nécessaire de quantifier les couplages entre les processus réactionnels et les modifications structurales et hydrodynamiques. Dans cette optique, nous avons construit deux dispositifs expérimentaux permettant d'injecter des saumures chargées en CO2 dans les conditions de stockage (T < 200 °C et P < 200 bar) et mis en oeuvre un protocole expérimental utilisant la microtomographie RX et l'analyse des roches et des fuides pour quantifier les variations des paramètres physiques et chimiques. Dans le cas des réservoirs carbonatés, on observe, près du puits d'injection, une forte variabilité des relations k-phi en fonction du régime de dissolution contrôlé par la chimie locale du fluide, ainsi que par les conditions initiales. A plus grande distance, on observe des processus de précipitation diminuant fortement la perméabilité. L'étude des roches de couverture fracturées (argilite) a montré qu'une percolation alternée d'une saumure chargée en CO2 et de CO2 gaz augmentait la perméabilité de fracture. Dans le cas des roches silicatées, la précipitation de carbonates est mise en évidence aussi bien dans les grès à zéolites que dans les frittés de dunite de San Carlos. Cependant, dans les grès à zéolites, la précipitation d'une phase argileuse est observée dans les chemins d'écoulement et engendre une forte diminution de la perméabilité.
https://tel.archives-ouvertes.fr/tel-00416408

tel-00416408
https://tel.archives-ouvertes.fr/tel-00416408
https://tel.archives-ouvertes.fr/tel-00416408/document
https://tel.archives-ouvertes.fr/tel-00416408/file/These_Luquot.pdf

Éditeur(s) : HAL CCSD
Résumé : 15 pages
A Stochastic Differential Equation appearing in the statistical theory of turbulence is extended in random environment by assuming that its two parameters are switched by an unobserved continuoustime Markov chain whose states represent the states of the environment. A Dirichlet process is placed as a prior on the space of the sample paths of this chain, leading to a hierarchical Dirichlet model whose estimation is done both on simulated data and on real data of wind speed measured at the entrance of a mangrove ecosystem.
https://hal.archives-ouvertes.fr/hal-00455050

hal-00455050
https://hal.archives-ouvertes.fr/hal-00455050
https://hal.archives-ouvertes.fr/hal-00455050/document
https://hal.archives-ouvertes.fr/hal-00455050/file/CSDA06_Srik_Hal.pdf

Éditeur(s) : HAL CCSD North Carolina State University
Résumé : Few studies have been conducted about relation between cellulose parameters and biomechanical properties of wood in tropical angiosperms species. For this purpose, on 13 trees from 3 species of French Guyana tropical rainforest in a clear active process of restoring verticality, i) growth strains were measured in situ in order to determine the occurrence of tension wood within samples and ii) cellulose structural parameters were estimated on all the samples using X-ray diffraction method. Crystallite size was estimated from the full-width at half-maximum of the Miller index (002) arc diffraction and angle T was measured following Cave's method. Relationships between these parameters and growth stresses were good and the variations between normal and tension wood were significant, i.e. a lower angle T and a larger crystallite size in tension wood. In order to have a good estimation of the microfibril angle in the main layer of the secondary wall for each species, an experimental calibration was done between angle T and microfibril angle observed with scanning electron microscopy.
ISSN: 19302126

hal-01031799
https://hal.archives-ouvertes.fr/hal-01031799
https://hal.archives-ouvertes.fr/hal-01031799/document
https://hal.archives-ouvertes.fr/hal-01031799/file/42-575-1-PB.pdf