Éditeur(s) : HAL CCSD Cambridge University Press (CUP)
Résumé : International audience
Andros is a key island for understanding both the timing of high-pressure–low-temperature(HP-LT) metamorphism and the dynamics of crustal-scale detachment systems exhuming high-gradeunits in the Cyclades (Greece). Using phengite 40Ar–39Ar geochronology coupled with thermobarometry,as well as data from literature, we constrain the pressure–temperature–time (P-T-t) paths of theMakrotantalon and Attic–Cycladic Blueschist units on Andros. Peak conditions of the HP-LT episodein the Makrotantalon unit are 550 °C and 18.5 kbar, dated at 116 Ma. We correlate this episode withEarly Cretaceous blueschist facies metamorphism recognized in the Pelagonian zone of continentalGreece. This is a new argument favouring a Pelagonian origin for the Makrotantalon unit. In the Attic–Cycladic Blueschist unit, the P-T-t path is characterized by: (1) exhumation after peak conditions inHP-LT conditions between 55 and 35 Ma; (2) isobaric heating at 7 kbar until 30 Ma; and (3) isothermaldecompression until 21 Ma. This thermal evolution and timing are similar to those of the neighbouringTinos Island, emphasizing major thermal re-equilibration at the transition between stable and retreatingsubduction. Modifications of the crustal thermal state played a major role in the evolution of the NorthCycladic Detachment System, below which Andros HP-LT units were exhumed.
ISSN: 0016-7568

insu-01114909
https://hal-insu.archives-ouvertes.fr/insu-01114909
DOI : 10.1017/S0016756814000661

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
In the Schistes Lustres of Alpine Corsica (France) serpentinized mantle rocks are associated with continental basement and meta-volcanic/-seclimentary cover rocks. The relationships among these different lithologies are especially well exposed in the Monte San Petrone unit, where Alpine metamorphism reached lawsonite-eclogite conditions. The contact between serpentinites and slivers of continental basement, relatively flat-lying over several kilometers, is characterized by evidence of cataclastic deformation pre-dating Alpine High-Pressure ductile fabrics. The serpentinite/continental basement pair is stratigraphically overlain by metasediments with a typical Jurassic-Cretaceous supra-ophiolitic lithostratigraphy, with metaradiolarites passing upward to marbles and cal cschists. Noticeably, no evidence of cataclastic deformation is found in metasediments. These observations indicate that the lithostratigraphy of the Monte San Petrone unit was established during a pre-Alpine polyphase evolution, which culminated in extensive brittle deformation along a flat-lying detachment fault prior to the deposition of Jurassic sediments. We suggest that the inferred Mesozoic extensional tectonics were related to the opening of the Westem Tethys. The Mesozoic architecture of the Monte San Petrone area, which is typical of an Ocean-Continent Transition (OCT) zone, was preserved despite Alpine deformation and metamorphism, when the different lithologies (i.e. meta-ophiolites, continent-derived rocks and metasediments) underwent a common metamorphic evolution, culminating at T=490-550 degrees C and P= 2.2-2.6 GPa. Similar tectonostratigraphic associations are observed in other high-pressure terranes of Alpine Corsica, suggesting that inherited OCT-type domains may be common in Alpine-type orogens.
ISSN: 0024-4937

hal-00617744
https://hal.archives-ouvertes.fr/hal-00617744
DOI : 10.1016/j.lithos.2011.02.013

Éditeur(s) : Wiley / Blackwell
Résumé : For the first time, a deep seismic data set acquired in the frame of the Algerian-French SPIRAL program provides new insights regarding the origin of the westernmost Algerian margin and basin. We performed a tomographic inversion of traveltimes along a 100-km-long wide-angle seismic profile shot over 40 ocean bottom seismometers offshore Mostaganem (Northwestern Algeria). The resulting velocity model and multichannel seismic reflection profiles show a thin (3-4 km thick) oceanic crust. The narrow ocean-continent transition (less than 10 km wide) is bounded by vertical faults and surmounted by a narrow almost continuous basin filled with Miocene to Quaternary sediments. This fault system, as well as the faults organized in a negative-flower structure on the continent side, marks a major strike-slip fault system. The extremely sharp variation of the Moho depth (up to 45 +/- 3 degrees) beneath the continental border underscores the absence of continental extension in this area. All these features support the hypothesis that this part of the margin from Oran to Tenes, trending N65-N70 degrees E, is a fossil subduction-transform edge propagator fault, vestige of the propagation of the edge of the Gibraltar subduction zone during the westward migration of the Alboran domain.
Geophysical Journal International (0956-540X) (Wiley / Blackwell), 2015-02 , Vol. 200 , N. 2 , P. 1027-1043

Droits : The Authors 2014. Published by Oxford University Press on behalf of The Royal Astronomical Society
http://archimer.ifremer.fr/doc/00255/36670/35278.pdf
http://archimer.ifremer.fr/doc/00255/36670/35279.pdf
DOI:10.1093/gji/ggu454
http://archimer.ifremer.fr/doc/00255/36670/

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
P>The Strait of Hormuz area is a transition zone between the continental collision of the Zagros (west) and the subduction of an oceanic part of the Arabian Plate beneath the Makran wedge (east). Geology and recent GPS measurements indicate that about 15 mm yr-1 of relative motion in N10 degrees E direction is accommodated by two major fault systems: (1) the NNW-trending Minab-Zendan-Palami (MZP) fault system that connects the Main Zagros Thrust (MZT) to the inner Makran thrust system and the Frontal subduction thrust and (2) the N-trending Sabzevaran-Kahnuj-Jiroft (SKJ) fault system that bounds the Jazmurian depression to the west. We use dense GPS measurements along four transects across these fault systems in order to determine the strains spatial distribution. The northern GPS transect confirms the total fault slip rates for both fault systems estimated by the tectonic analyses (about 10 and 7.3 mm yr-1 in N10 degrees direction across the MZP and SKJ fault systems, respectively). For both fault systems, the elastic deformation spreads over shear zones that are several tens of kilometres wide. However, transects located close to latitude 27 degrees N reveal a much narrower shear zone (similar to 10 km) for the MZP fault system. Moreover, we confirm that most of the present-day strain is transferred towards the frontal subduction thrust rather than towards the inner Makran thrusts. In order to complement this new GPS velocity field with spatially dense measurements, we processed a set of ERS radar images by the radar interferometry (InSAR) technique. We used both a 'stacking' and a 'persistant-scatterers' approach to differentiate the ground deformation signal which spatial gradient is expected to be very low, from the atmospheric signal. Results from these interferograms appear to be relatively in agreement with the GPS-determined strain distribution. Nevertheless, they confirm the absence of any superficial creep behaviour since no sharp discontinuity on interferometric phase can be noted on any interferogram. Finally, we use a purely kinematic 'block model' inversion process to calculate slip rates and locking depths for each fault system from our GPS measurements. These models suggest that the relative quiescence over the last 200 yr has certainly produced a slip deficit as high as 2 m. So, we may wonder if the MZP fault system is not late in the interseismic phase of its earthquake cycle.
ISSN: 0956-540X

hal-00429386
https://hal.archives-ouvertes.fr/hal-00429386
DOI : 10.1111/j.1365-246X.2009.04321.x

Éditeur(s) : Oxford Univ Press
Résumé : This study presents the results of a deep seismic survey across the north Algerian margin, based on the combination of 2-D multichannel and wide-angle seismic data simultaneously recorded by 41 ocean bottom seismometers deployed along a north-south line extending 180 km off Jijel into the Algerian offshore basin, and 25 land stations deployed along a 100-km-long line, cutting through the Lesser Kabylia and the Tellian thrust-belt. The final model obtained using forward modelling of the wide-angle data and pre-stack depth migration of the seismic reflection data provides an unprecedented view of the sedimentary and crustal structure of the margin. The sedimentary layers in the Algerian basin are 3.75 km thick to the north and up to 4.5-5 km thick at the foot of the margin. They are characterized by seismic velocities from 1.9 to 3.8 km s(-1). Messinian salt formations are about 1 km thick in the study area, and are modelled and imaged using a velocity between 3.7 and 3.8 km s(-1). The crust in the deep sea basin is about 4.5 km thick and of oceanic origin, presenting two distinct layers with a high gradient upper crust (4.7-6.1 km s(-1)) and a low gradient lower crust (6.2-7.1 km s(-1)). The upper-mantle velocity is constrained to 7.9 km s(-1). The ocean-continent transition zone is very narrow between 15 and 20 km wide. The continental crust reaches 25 km thickness as imaged from the most landward station and thins to 5 km over a less than 70 km distance. The continental crust presents steep and asymmetric upper- and lower-crustal geometry, possibly due to either asymmetric rifting of the margin, an underplated body, or flow of lower crustal material towards the ocean basin. Present-time deformation, as imaged from three additional seismic profiles, is characterized by an interplay of gravity-driven mobile-salt creep and active thrusting at the foot of the tectonically inverted Algerian margin.
Geophysical Journal International (0956-540X) (Oxford Univ Press), 2014-09 , Vol. 198 , N. 3 , P. 1486-1503

Droits : 2014 The Royal Astronomical Society
http://archimer.ifremer.fr/doc/00217/32836/32150.pdf
DOI:10.1093/gji/ggu179
http://archimer.ifremer.fr/doc/00217/32836/

Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
Continental rifts and passive continental margins show fundamental along-axis segmentation patterns that have been attributed to one or a number of different processes: extensional fault geometry, variable stretching along strike, preexisting lithospheric compositional and structural heterogeneities, oblique rifting, and the presence or absence of eruptive volcanic centers. The length and width scales of the rift stage fault-bounded basin systems change during the late evolution of the new plate boundary, and the role of magmatism may increase as rifting progresses to continental rupture. Along obliquely spreading ridges, first-order mid-ocean ridge geometries originate during the synrift stage, indicating an intimate relationship between magma production and transform fault spacing and location. The Gulf of Aden rift is a young ocean basin in which the earliest synrift to breakup structures are well exposed onshore and covered by thin sediment layers offshore. This obliquely spreading rift is considered magma-poor and has several large-offset transforms that originated during late stage rifting and control the first-order axial segmentation of the spreading ridge. Widely spaced geophysical transects of passive margins that produce only isolated 2-D images of crust and uppermost mantle structure are inadequate for evaluation of competing rift evolution models. Using closely spaced new geophysical and geological observations from the Gulf of Aden we show that rift sectors between transforms have a large internal variability over short distances (∼10 km): the ocean-continent transition (OCT) evolves from a narrow magmatic transition to wider zones where continental mantle is probably exhumed. We suggest that this small-scale variability may be explained (1) by the distribution of volcanism and (2) by the along-strike differences in time-averaged extension rate of the oblique rift system. The volcanism may be associated with (1) the long-offset Alula-Fartak Fracture Zone, which may enhance magma production on its younger side, or (2) channeled flow from the Afar plume material along the newly formed OCT and the spreading ridge. Oblique extension and/or hot spot interactions may thereby have a significant control on the styles of rifting and continental breakup and on the evolution of many magma-poor margins.
ISSN: 1525-2027

hal-00504866
https://hal.archives-ouvertes.fr/hal-00504866
https://hal.archives-ouvertes.fr/hal-00504866/document
https://hal.archives-ouvertes.fr/hal-00504866/file/G3-Leroy_al-2010.pdf
DOI : 10.1029/2009GC002963

Résumé : Les marges continentales passives représentent la zone de transition entre le plateau continental et les domaines océaniques profonds. Elles sont typiquement caractérisées par d'épais bassins sédimentaires où les produits détritiques des continents s'accumulent et subissent une longue histoire d'enfouissement et de mouvements verticaux (subsidence/surrection). Dans ces bassins reposent de vastes ressources naturelles (surtout les hydrocarbures) et ils ont ainsi un grand intérêt économique.

Droits : 2008 Ifremer
http://archimer.ifremer.fr/doc/00034/14510/11843.pdf
http://archimer.ifremer.fr/doc/00034/14510/

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
In ophiolites and in present-day oceanic crust formed at fast spreading ridges, oceanic plagiogranites are commonly observed at, or close to the base of the sheeted dike complex. They can be produced either by differentiation of mafic melts, or by hydrous partial melting of the hydrothermally altered sheeted dikes. In addition, the hydrothermally altered base of the sheeted dike complex, which is often infiltrated by plagiogranitic veins, is usually recrystallized into granoblastic dikes that are commonly interpreted as a result of prograde granulitic metamorphism. To test the anatectic origin of oceanic plagiogranites, we performed melting experiments on a natural hydrothermally altered dike, under conditions that match those prevailing at the base of the sheeted dike complex. All generated melts are water saturated, transitional between tholeiitic and calc-alkaline, and match the compositions of oceanic plagiogranites observed close to the base of the sheeted dike complex. Newly crystallized clinopyroxene and plagioclase have compositions that are characteristic of the same minerals in granoblastic dikes. Published silicic melt compositions obtained in classical MORB fractionation experiments also broadly match the compositions of oceanic plagiogranites; however, the compositions of the coexisting experimental minerals significantly deviate from those of the granoblastic dikes. Our results demonstrate that hydrous partial melting is a likely common process in the root zone of the sheeted dike complex, starting at temperatures exceeding 850A degrees C. The newly formed melt can either crystallize to form oceanic plagiogranites or may be recycled within the melt lens resulting in hybridized and contaminated MORB melts. It represents the main MORB crustal contamination process. The residue after the partial melting event is represented by the granoblastic dikes. Our results support a model with a dynamic melt lens that has the potential to trigger hydrous partial melting reactions in the previously hydrothermally altered sheeted dikes. A new thermometer using the Al content of clinopyroxene is also elaborated.
ISSN: 0010-7999

hal-00534058
https://hal.archives-ouvertes.fr/hal-00534058
DOI : 10.1007/s00410-010-0502-6

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The N-S Languedoc volcanic province between the French Massif Central and the Mediterranean Sea is characterized by sporadic scattered low volume (similar to 2 km(3)) and geochemically homogeneous alkali basaltic activity spanning from 161 to 05 Ma The existence of magmatic activity of such a long duration within such a small area (similar to 140 km long and similar to 60 km wide) in spite of the extensive shift to the East of the European plate (about 2500 km during the last 160 Ma) is problematic Trace-element abundances in lavas suggest low degrees of melting (1-5%) in the spinet-garnet transition zone of an enriched Iherzolitic source The lavas display rather large ranges in Sr isotopic ratios (0 70307-0 70436) The Nd-143/Nd-144 ratio variations are smaller (0 51268-0 51300) and these of Pb-206/Pb-204 Pb-208/Pb-204 and Pb-207/Pb-204 are 18 745-19 515 38 53239 228 and 15 567-15 680 respectively The Languedoc lithospheric mantle as sampled by xenoliths is globally similar to the Pyrenees lithosphere The xenoliths show also rather large Sr Nd and Pb isotopic variations (Sr-87/Sr-86 0 70287-0 70578 Nd-143/Nd-144 0 51256-0 51414 Pb-208/Pb-204 37772-39 041 Pb-206/Pb-204 17 901-19 353) except for Pb-207/Pb-204 (15 570-15 620) The Pb-206/Pb-204 and La/Sm ratios are positively correlated both in xenoliths and lavas The increase of the Pb-206/Pb-204 (which could be interpreted as participation of the European Asthenospheric Reservoir EAR) is probably related to volatile-rich (carbonated?) fluid percolation This is corroborated by LILE and HFSE patterns observed in several xenoliths Therefore our data on lavas and xenoliths suggest a lithospheric origin for this long lived magmatism We propose (1) that the role of the asthenosphere in the Languedoc volcanism was restricted to volatile-rich fluid supplying and (2) that the fluid injection within the lithosphere may be related to the arrival of the Central Atlantic Plume head beneath Western Europe about 70 Ma ago In this model the isotopic signature of the oldest lavas (>70 Ma) would be that of the mantle lithosphere inherited from Hercynian processes The signatures of the subsequent lavas would be driven by the metasomatic component stored within the lithosphere and preferentially mobilized during incipient melting This metasomatised lower lithosphere was close to its solidus and small changes in P (or T) triggered incipient melting leading to basaltic volcanism Successive local re adjustments of the lithospheric blocks which accompanied the Meso-Cenozoic evolution of the Thetys Ligurian margin towards the present Mediterranean margin are the probable cause of these changes and so the sporadic volcanic activity in Languedoc is unrelated to deep asthenospheric processes
ISSN: 0024-4937

hal-00558884
https://hal.archives-ouvertes.fr/hal-00558884
DOI : 10.1016/j.lithos.2010.04.009

Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
We analyze focal mechanisms of shallow-intermediate earthquakes in a NW-SE transect along the western Betic Cordillera and Alboran Sea, and deep earthquakes located in the central Betics to constrain the state of stress at the Gibraltar Arc slow convergence area. Shallow earthquakes (< 40 km) are preferably clustered at the mountain front. A general NW-SE horizontal compression is compatible with the convergence, and NW plunging compression axes are in agreement with frontal thrust activity. Toward the Alboran Sea the earthquakes are progressively deeper, reaching intermediate depths (40-120 km) near the coast and supporting the present-day activity of subduction only in this area. The Iberian continental crust concentrates most of the intermediate seismicity and is forced to partially sink into the mantle, probably through the pull of the oceanic slab. This downdip pull together with the buoyancy of the Iberian continental crust produces the slab curvature, downdip extension in the external arc of the continental slab, and downdip compression in the inner arc. T axes highly dipping to the southeast at 90-120 km depth occur at the oceanic/continental transition. Deep earthquakes (> 620 km) show very similar focal mechanisms, fitting the general slab behavior of resistance to further descent at the 660 km discontinuity. Seismicity features evidence the present-day stress distribution in a context of transition from subduction to continental collision.
ISSN: 1525-2027

hal-00669889
https://hal.archives-ouvertes.fr/hal-00669889
DOI : 10.1029/2011GC003824

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
We have analyzed shear wave splitting recorded by portable and permanent broadband and long-period stations located in the eastern United States. Teleseismic shear waves (SKS, SKKS, and PKS) were used to retrieve the splitting parameters: the orientation of the fast wave polarization plane ϕ and the delay time δt. In total, 120 seismic events were processed, allowing for more than 600 splitting measurements. Within the Appalachians, stations located in the western (external) part are characterized by δt≈1s and ϕ trending N50°– 70°E in the south and central regions and N30°–40°E in the north, closely following the trend of the orogenic belt in these areas. The transition region between north and central is characterized by δt≈1–1.3 s and by E-W trending ϕ that are at a high angle to the regional geologic trend. Measurements at two stations located in the eastern (internal) part of the belt indicate very weak anisotropy. The large-scale pattern of anisotropy is not consistent with that predicted for simple asthenospheric flow beneath the plate. Splitting along the southern and eastern margins of the continent is consistent with that expected for Grenvillian deformation, an alternative model of asthenospheric flow around the cratonic keel cannot be ruled out. Within the cratonic core, the correlation between δt and lithospheric thickness suggests a lithospheric anisotropy. Smaller-length-scale variations also argue for a significant contribution of lithospheric structures. The fabric responsible for shear wave splitting may have formed during tectonic episodes that affected the eastern United States, i.e., the Grenville and Appalachian orogenies and the subsequent rifting of the North Atlantic Ocean. Our observations in the western Appalachians suggest that the anisotropy may be preserved since the Grenvillian orogeny. The absence of detectable splitting in the two stations in the eastern Appalachians is attributed to the igneous intrusions related to the Atlantic rifting. The measurements in the transition between the northern and central southern Appalachians, constitute an intriguing anomaly, whose E-W ϕ have little obvious relation to the regional surface geology. We suggest two possible causes: (1) the local dominance of asthenospheric flow, motivated by the proximity of a pervasive low-velocity anomaly and (2) lithospheric deformation in a transcontinental strike-slip fault zone active during the Appalachian collision.
ISSN: 2169-9313

hal-01388859
http://hal.univ-reunion.fr/hal-01388859
http://hal.univ-reunion.fr/hal-01388859/document
http://hal.univ-reunion.fr/hal-01388859/file/Barruol_JGR_1997.pdf
DOI : 10.1029/96JB03800

Éditeur(s) : HAL CCSD
Résumé : International audience
The purpose of our study is to model a geothermal reservoir. When geothermal reservoir are assumed to be composed of pure water, the transfer of mass and energy is classically described by two balance equations: mass balance equation and the energy balance equation. In addition to those equations, fluid velocity ist classically given by the Darcy law while thermodynamic properties, inferred from theoretical or empirical equations of state, are used to close the mathematical system. Once this system is closed, there exist different solutions. The first one is to solve for pressure and temperature with a variable switch to saturation in the two-phase region (e.g. TOUGH2). The second one is to solve for pressure and enthalpy to increase stability of phase transition between single and two-phase states (e.g. Hydrotherm). We adopted the second option and chose te use a splitting method to get rid of the complexity of coupling equations and a finite volume method for the spatial discretization. Selecting object-oriented languages, we developed a multi-language framework, combining Python, Fortran and a C++ implementation of IAPWS (from the freesteam project) including the supercritical equations, in porous media velocity is given by Darcy law and to close the system physical properties are determined by the IAPWS-IF97 thermodynamic formulation. We resolve the equations in pressure and enthalpy instead of pressure and temperature in order to increase stability and to handle easier the passage from a single-phase to a two-phase system. We solve the system by using a splitting method - to get rid of the complexity of coupling equations - and a finite volume method. We offer some freedom to users thanks to the implementation of several methods like explicit or implicit Euler, Runge-Kutta or BDF2 for time solvers or GMRES and BICGSTAB for the linear solver. We can handle several boundary conditions like no-flow - describing a boundary which can not exchange matter with the exterior - or like a mixed-therm condition - a Dirichlet condition to the pressure and a Dirichlet or an outflow condition to the temperature in order to describe a recharge or a discharge zone - ... We're developing a multi-language framework, combining Python, Fortran and the C++ implementation of IAPWS (from the freesteam project). All these languages are object-oriented. We've applied this simulation model to the dogger in Paris, France, to several one-dimensional systems and a two-dimensional one made by Coumou with the CSMP++ platform. The dogger is a reservoir exploited to produce heat by pumping water at 70 and reinjecting it in the reservoir at 40. In the one-dimensional systems we wanted to observe the process of heat transfer from a higher temperature boundary to a smaller one in a high-energy domain. The last simulation shows the natural convection of water in a fault. For every simulation we compared the solutions we found with an other code (TOUGH2 or CSMP++) and they agreed. The next step will be to model the geothermal plant in Guadeloupe, West Indies. It's the only place in France - and in the West Indies so far - producing electricity with the earth power. The temperature can reach up to 1000 and the pressure range is around a few hundreds MPa. In some surface zones we can see two-phase water at atmospheric pressure. In the 1980s Bouillante was a laboratory for France. Since 1995 Bouillante has given 30GWh electricity a year to the Guadeloupeans.
PROCEEDINGS, Thirty-Ninth Workshop on Geothermal Reservoir Engineering
Stanford, United States

Droits : info:eu-repo/semantics/OpenAccess
hal-00944133
https://hal-brgm.archives-ouvertes.fr/hal-00944133
https://hal-brgm.archives-ouvertes.fr/hal-00944133/document
https://hal-brgm.archives-ouvertes.fr/hal-00944133/file/Copol.pdf

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : The Oman ophiolite consists of several massifs cropping out along a 500 km long band trending NW-SE along the coast of Oman; it is one of the best exposed sections of oceanic crust and mantle in the world. There is a gradient in igneous processes and composition in the ophiolite, with the northern massifs recording a polygenetic igneous history involving an increasingly important subduction component, whereas the southern massifs were formed primarily via a mid-ocean ridge basalt (MORB)-like, single-stage process at a submarine spreading ridge. In this study we use geochemical data from Wadi Tayin, which is one of the southern massifs of the Oman ophiolite, to constrain the composition and genesis of oceanic crust and upper mantle. The Wadi Tayin harzburgites are residues of partial melting that are as depleted as the most depleted mid-ocean ridge peridotites. They have low middle- to heavy rare earth element ratios, most probably reflecting melting close to and beyond the exhaustion of clinopyroxene. Like many abyssal peridotites, the Wadi Tayin samples show enrichment in highly incompatible elements, giving rise to U-shaped MORB-normalized trace element patterns. We favor the idea that this is caused by enrichment of highly incompatible elements along grain boundaries in peridotite, which may be the result of near-equilibrium partitioning between grain boundaries and grain interiors, rather than disequilibrium processes. Equilibrium partitioning between crystals and grain boundaries during melting and melt extraction is also our preferred explanation for ubiquitous high Pb contents relative to Ce and La in our samples as well as in most abyssal peridotites. The Wadi Tayin samples record substantial variability in terms of osmium isotopic composition and platinum group element (PGE) concentrations. The more radiogenic nature of the dunites and impregnated peridotites compared with the residual harzburgites may be due to relatively high Os-187/Os-188 in melt transported through the dunites. The presence of residual peridotites with whole-rock osmium isotopic compositions less radiogenic than MORB may be explained by melting of a veined (upwelling) mantle forming mixed melts in which much of the Os derives from veins with high Re/Os in a matrix of previously depleted peridotite. An important result of this study is that the shallowest samples are refertilized (i.e. anomalously enriched in incompatible elements), and record relatively high metamorphic closure temperatures. These observations suggest that migrating melt underwent crystallization during rapid cooling in the uppermost mantle during and immediately after ridge magmatism. A variety of geothermometers all yield the result that the stratigraphically highest harzburgites equilibrated at higher temperature than the deeper ones. The systematic decrease in closure temperature with increasing depth below the Moho transition zone probably reflects systematic variation in cooling rate as a function of depth in the mantle section. We hypothesize that the refertilization and higher closure temperatures recorded by the uppermost mantle samples are linked. More rapid cooling led to higher closure temperatures, and to partial crystallization of migrating melts in the shallowest part of the mantle section, yielding slightly elevated abundances of elements such as Ca and Na, and incompatible trace elements.
ISSN: 0022-3530

hal-00456056
https://hal.archives-ouvertes.fr/hal-00456056
DOI : 10.1093/petrology/egp077

Éditeur(s) : HAL CCSD National Research Council Canada
Résumé : International audience
Back-arc extension in the Aegean, which was driven by slab rollback since 45 Ma, is described here for the first time in two stages. From Middle Eocene to Middle Miocene, deformation was localized leading to i) the exhumation of high-pressure metamorphic rocks to crustal depths, ii) the exhumation of high-temperature metamorphic rocks in core complexes and iii) the deposition of sedimentary basins. Since Middle Miocene, extension distributed over the whole Aegean domain controlled the deposition of onshore and offshore Neogene sedimentary basins. We reconstructed this two-stage evolution in 3D and four steps at Aegean scale by using available ages of metamorphic and sedimentary processes, geometry and kinematics of ductile deformation, paleomagnetic data and available tomographic models. The restoration model shows that the rate of trench retreat was around 0.6 cm/y during the first 30 My and then accelerated up to 3.2 cm/y during the last 15 My. The sharp transition observed in the mode of extension, localized versus distributed, in Middle Miocene correlates with the acceleration of trench retreat and is likely a consequence of the Hellenic slab tearing documented by mantle tomography. The development of large dextral NE-SW strike-slip faults, since Middle Miocene, is illustrated by the 450 Km-long fault zone, offshore from Myrthes to Ikaria and onshore from Izmir to Balikeshir, in western Anatolia. Therefore, the interaction between the Hellenic trench retreat and the westward displacement of Anatolia started in Middle Miocene, almost 10 Ma before the propagation of the North Anatolian Fault in the North Aegean.
ISSN: 0008-4077

insu-01271296
https://hal-insu.archives-ouvertes.fr/insu-01271296
https://hal-insu.archives-ouvertes.fr/insu-01271296/document
https://hal-insu.archives-ouvertes.fr/insu-01271296/file/Brun%20etal%20CJES%202016.pdf
DOI : 10.1139/cjes-2015-0203

Éditeur(s) : HAL CCSD Elsevier Masson
Résumé : International audience
Although they are famous among Earth scientists, the Lherz peridotites are exposed within geological formations of the North Pyrenean Zone (NPZ) still lacking detailed investigations. Our study focuses on the metasediments of the Aulus basin hosting the Lherz peridotite body and associated ultramafic fragments of smaller size. The new data set comprises of structural analysis and detailed geological mapping of the massive Mesozoic marbles that form the prerift sequence typical of the NPZ and of the ultramafic-rich clastic breccia formations surrounding the peridotite bodies. The massive marbles display an evolution from hot and ductile to cold and brittle deformation, indicative of an exhumation process ending with the sedimentary reworking of both the deformed Mesozoic metasediments and the exhumed ultramafic rocks. Crystal Preferred Orientations (CPO) measured in the marbles support a deformation mechanism by dislocation creep of calcite, which is dominant between 400 8C and 600 8C; these deformation temperatures are within the range determined earlier by Clerc et al. (2015), using RSCM (Raman Spectroscopy of Carbonaceous Material) geothermometry. As a consequence, we better describe the transition from ductile to brittle deformation in the prerift marbles and clarify the origin of the syn-rift breccias. Due to continuous exhumation along detachments' faults, the brecciated metamorphic carbonates of the prerift NPZ sedimentary cover were passively uplifted towards shallower levels and progressively unroofed, while transported passively on the back of the exhumed ultramafic footwall. These results are consistent with the recent interpretations of the North Pyrenean peridotites as remnants of subcontinental mantle rocks exhumed within the pre-Pyrenean rift system. We emphasize the importance of tectonic decoupling between the Mesozoic sedimentary cover and the Palaeozoic basement, which leads to the juxtaposition of metamorphosed and deformed Mesozoic Please cite this article in press as: Lagabrielle Y, et al. Very high geothermal gradient during mantle exhumation recorded in mylonitic marbles and carbonate breccias from a Mesozoic Pyrenean palaeomargin (Lherz area, North Pyrenean Zone, France). C. R. Geoscience (2016), http://dx.
ISSN: 1631-0713

Droits : http://creativecommons.org/licenses/by-nc-nd/
insu-01285079
https://hal-insu.archives-ouvertes.fr/insu-01285079
https://hal-insu.archives-ouvertes.fr/insu-01285079/document
https://hal-insu.archives-ouvertes.fr/insu-01285079/file/1-s2.0-S1631071315002060-main.pdf
DOI : 10.1016/j.crte.2015.11.004

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Melting experiments were performed on a silica-rich peridotite composition at 10-17 GPa to determine majoritic garnet-melt partition coefficients (D) for major and trace elements. Our results show that D for many elements, including Na, Sc, Y and rare earth elements (REE), varies significantly with increasing pressure or proportion of majorite component. Lu and Sc become incompatible at 17 GPa, with D decreasing from 1.5 at 10 GPa to 0.9 at 17 GPa. As predicted from lattice strain, log D for isovalent cations entering the large site of majoritic garnet exhibits a near-parabolic dependence on ionic radius. Our data are used to refine a previously published predictive model for garnet-melt partitioning of trivalent cations, which suffered from a lack of calibration in the 10-20 GPa range. Our results suggest that Archean Al-depleted komatiites from Barberton (South Africa) may have been generated by partial melting of dry peridotite at depths between 200 and 400 km. We also speculate that transition zone diamonds from Kankan (Guinea), which contain inclusions of majoritic garnet, may have formed from the partial reduction of CO2-rich magmas that subsequently transported them to the surface. This hypothesis would provide an explanation for the REE patterns of majoritic garnet trapped within these diamonds, including Eu anomalies. Finally, we show that segregation of majoritic garnet-bearing cumulates during crystallisation of a deep Martian magma ocean could lead to a variety of Lu/Hf and Sm/Nd ratios depending on pressure, leading to a range of ε143Nd and ε176Hf isotope signatures for potential mantle sources of Martian rocks.
ISSN: 0024-4937

hal-00767567
https://hal.archives-ouvertes.fr/hal-00767567
DOI : 10.1016/j.lithos.2012.06.013

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
This study reports petrostructural observations in the pargasite and phlogopite-bearing Finero peridotite massif (Italian Western Alps), which suggest that the pervasive foliation in this massif was formed by deformation concomitant with percolation of hydrous Si-rich melts: (1) diffuse contacts, but systematic parallelism between the pyroxenitic layers and the foliation of the peridotite (2) strong shape and crystal preferred orientations (SPO and CPO), but subhedral or interstitial shapes and weak intracrystalline deformation of the hydrous phases, (3) CPO, but interstitial shapes of the pyroxenes, (4) very coarse olivine grain sizes, which are correlated to the olivine abundance, and (5) elongated shapes, but weak intracrystalline deformation, and extremely weak and highly variable CPO of olivine. The pervasive deformation of the Finero peridotite occurred therefore under conditions that allowed coexistence of H2O–CO2-bearing melts, pargasite, and spinel, that is, temperatures of 980–1080 °C and pressures <2 GPa. The petrostructural observations suggest that the presence of hydrous melts results in accommodation of large amounts of deformation by stress-controlled dissolution–precipitation and advective transport of matter by the melts and in fast grain boundary migration in olivine. By consequence, it produces significant rheological weakening. Water contents in olivine are <4 ppm wt., implying limited contribution of hydration of olivine to weakening. In addition, the analysis of protomylonites composing the external domains of the shear zones that overprint the pervasive foliation indicates that the transition to melt-free conditions results in enhanced contribution of dislocation creep to the deformation. The associated increase of the peridotites' strength leads to onset of strain localization. The latter is not correlated to the local abundance in pargasite or phlogopite, implying that crystallization of amphiboles or phlogopite, even at concentrations of 25 vol.%, does not produce rheological weakening in the upper mantle.
ISSN: 0012-821X

hal-01667879
https://hal.archives-ouvertes.fr/hal-01667879
DOI : 10.1016/j.epsl.2017.08.015

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Maguelone shore extends along the northern coast of the Gulf of Lions, west of the Rhone Delta and east of high-gradient coastal streams that have provided most of the clastic sediments to the Gulf of Lions margin since the early Miocene. This 10 km-wide area is constituted by a small coastal watershed (15 km long) in low-lying carbonate hills, a kilometre-wide marsh, a sandy beach barrier and a shoreface experiencing local low sedimentation rates. This onshore-offshore transition zone is a key area to understand the relationships between erosion, by-pass, deposition and preservation processes. Unlike the neighbouring Rhone deposits that display numerous thick deltaic sequences related to a continuous sediment flux, the Maguelone shore exhibits peculiar sedimentary bodies. The analysis of about 250 km of new VHR seismic profiles acquired over the study area, 9 short cores and outcrops data allowed us to determine the three-dimensional high-resolution geometry of the coastal system tracts from Quaternary to present-day. This revealed dominant denudation processes in the Upstream catchments associated with the formation of incised valleys during Quaternary lowstands. In addition, this study investigates the erosion and deposition mechanisms controlled by littoral hydrodynamics that have been taken place on this shore since the last transgression. In particular, metre-high and hundreds of metre-long sandy bodies constructed by alongshore hydrodynamics were identified and their effect on the morphodynamics of the whole littoral system is discussed. The Maguelone shore can be used as an experimental study for onshore/offshore dynamics under the influence of microtidal wave/current hydrodynamics and very low river-derived sediment flux during a eustatic cycle. Geometry of system tracts across flood plain to shoreface is usually considered to be controlled by relative sea-level changes, and is successfully analysed with 2D sequence stratigraphy cross-shore models. It is observed that in areas like the Maguelone shore, traditional sequence stratigraphy methods might not be fully relevant and need to integrate alongshore hydrodynamical processes.
ISSN: 0025-3227

hal-00421060
https://hal.archives-ouvertes.fr/hal-00421060
DOI : 10.1016/j.margeo.2009.06.008

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
This study presents new geochemical data on 26 mafic lavas from the Middle Atlas and Central Morocco volcanic provinces, including Miocene nephelinites and Pliocene-Quaternary (3.9-0.6Ma) nephelinites, basanites, alkali and subalkaline basalts. Most of them represent near-primary magmas, although some alkali basalts were derived from the minor fractionation of olivine and diopside phenocrysts. These evolved samples and the subalkaline basalt display higher 207Pb/204Pb and Zr/Nb ratios and lower εNd consistent with their contamination by lower crustal granulites during an open fractionation process. The progressive enrichment in incompatible elements observed from alkali basalts to nephelinites suggests their derivation from decreasing partial melting degrees of an enriched mantle source located at the garnet-spinel transition zone. The strong negative spikes observed for K in multielement patterns indicate that this source contained a residual pargasitic amphibole. We propose that partial melting occurred at around 2GPa, i.e. near the lithosphere-asthenosphere boundary beneath the Middle Atlas (60-80km).The trace element and isotopic Sr-Nd-Pb-Hf signature of the uncontaminated lavas displays a geochemical flavour intermediate between those of high μ (HIMU), "C", and enriched mantle components. It is very similar to that of abundant metasomatic amphibole- and clinopyroxene-rich lithospheric peridotites and pyroxenites carried by Middle Atlas lavas, which likely represent an analog of the source of these lavas. It is therefore not necessary to postulate the contribution of a "fresh" asthenospheric mantle to their genesis. We propose that they resulted from the partial melting of the base of a veined lithospheric mantle metasomatised during the late Cretaceous by alkaline melts from the Central Atlantic plume, the ancestor of the Canary plume. Melting was probably triggered by the flux of a hot mantle within a regional SW-NE sub-lithospheric channel, in response to either the Alboran slab retreat or edge-driven convection around the West African craton.
ISSN: 0024-4937

insu-01056523
https://hal-insu.archives-ouvertes.fr/insu-01056523
DOI : 10.1016/j.lithos.2014.07.009

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Oman ophiolite includes both a fossil fast spreading axis, defined by five mantle diapirs, and an off-axis mantle diapir emplaced 30 km from the axis, providing a natural laboratory for the study of off-axis magmatic processes. We compare field and petrological observations coupled with geochemical and isotopic analyses of samples from the off-axis diapir with those of the nearest on-axis diapir, with a particular focus on the Moho Transition Zone (MTZ). Both diapirs are defined by the presence of steeply plunging lineations, but in the on-axis case, these lineations rotate gradually into parallelism with the horizontal magmatic lineations of the overlying crust, while in the off-axis case, a shear zone separates the steeply plunging lineations from the horizontal lineations of the surrounding mantle. In the on-axis diapir, the MTZ is 50 to 500 m thick and composed of dunite with layered gabbro lenses whereas in the off-axis diapir, the MTZ is thicker and composed of dunite with massive (∼20% of MTZ) clinopyroxenite lenses and a notable absence of plagioclase. Moreover, the off-axis diapir is associated with amphibole-bearing intrusions, consisting of Mg-rich gabbroic sills in the mantle peripheral to the diapir, and microgabbroic lenses of broadly basaltic composition in the overlying crust. The ε Nd values of the pyroxenites in the MTZ of the off-axis diapir fully overlap with those of the intrusions in the surrounding mantle and crust, suggesting that they are genetically related. Calculated rare earth element (REE) abundances of liquids in equilibrium with clinopyroxene imply that the magmas that traversed the MTZ of the off-axis diapir were more depleted in highly incompatible elements than their counterparts in the MTZ of the on-axis diapir. On the other hand, Nd isotopic compositions of the off-axis samples (εNd=6.2–7.9εNd=6.2–7.9 in 18 of 19 samples) indicate derivation of their parental magmas from a less depleted source than that which produced the magma associated with the on-axis gabbro (εNd=7.8–9.2εNd=7.8–9.2, 10 analyses).To explain these observations, we suggest that the earliest magmas in the uprising off-axis diapir formed from the partial melting of pyroxenite veins with less radiogenic Nd isotopic compositions than those of the ambient peridotite. As the diapir traversed the cool, hydrated lithosphere these early melts interacted with depleted harzburgites, lowering the incompatible element contents of the melt products while having little effect on their Nd isotopic compositions. The great abundance of clinopyroxene in the off-axis MTZ might be explained by the high pyroxene component in the original melt but perhaps also by the presence of water in the lithosphere, which would favor the crystallization of clinopyroxene while inhibiting that of plagioclase. The intrusions in the overlying crust could represent, to first order, the secondary melts produced by the melt–harzburgite reaction, while the sills in the surrounding mantle may be cumulates from such secondary melts.These results shed light on processes occurring during interaction between rising off-axis material and depleted, hydrated lithospheric mantle. Furthermore, if our interpretation is correct, the low εNd values of the off-axis samples contribute to the growing body of evidence for the presence of pyroxenite veins in the MORB mantle source.
ISSN: 0012-821X

hal-01306575
https://hal.archives-ouvertes.fr/hal-01306575
DOI : 10.1016/j.epsl.2015.12.005