Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
Strain and strain rate partitioning in partially molten rocks are two of the important mechanisms that govern the process of coupling and/or decoupling of the partially molten lithosphere. Consequently, the proportion of partial melt and crystals and their network in partially molten rocks influence the degree of the partitioning along with the bulk rheology of the system. This study explores the possible role of finite strain and strain rate on the rate and volume of partial melting and crystallization in a metapelitic system undergoing deformation. Cylinders of synthetic quartz-muscovite aggregate (7: 3 volume ratio) were deformed in torsion at 750 C, 300 MPa and constant shear strain rate ((gamma) over dot = 3 x 10(-4) s(-1)) for finite shear strains (gamma) 1-15. The deformed samples were studied along the longitudinal tangential ( LT) and axial ( LA) sections to obtain the data along a range of strain rates for a given finite strain and vice versa. The results showed that deformation plays an important role on the kinetics of partial melting and crystallization. With increasing strain rate, amount and rate of crystallization comprise the volumetrically dominant process compared to partial melting at a given finite strain. In contrast, when the strain rate is constant, partial melting is the dominant process over crystallization up to moderate strain (gamma < 5). The dominant process reverses at higher strain, and the system shows more crystallization than partial melting. Application of the experimental data to geological systems implies that for metapelites a significant amount (similar to 20%) of partial melt can generate at high strain rate and moderate strain (gamma similar to 7), but at high strain (gamma = 15) the system is melt depleted. Under such conditions, decoupling should take place in brittle-ductile mode. On the other hand, rocks undergoing deformation with low strain rates and strain (gamma < 3) contain more than 25% partial melt, which can act as a major decoupling agent by localizing ductile shear zones.
ISSN: 0148-0227

hal-00617714
https://hal.archives-ouvertes.fr/hal-00617714
DOI : 10.1029/2010JB007865

Éditeur(s) : HAL CCSD Elsevier
Résumé : A synthesis of backscatter imagery coupled with a large 3D seismic dataset in the Lower Congo Basin (LCB) reveals a patchy distribution of features interpreted to be associated with fluid seepage from 300 m to 2500 m water depth. With the exception of one region of anomalous backscatter positive-relief mounds, all inferred seep sites occur in negative-relief pockmarks. The extensive 3D seismic dataset in the LCB offers a unique opportunity to study the plumbing system that is feeding surface cold seep systems, and in general, to reconstruct the relationship between tectonics and fluid flow in continental margins. The fluid seeps in the LCB are associated with morphologically, stratigraphically or tectonically controlled focused fluid flow. The integration of the geophysical datasets, backscatter imagery coupled to 3D seismic, clearly indicates that fluid seeps are not randomly distributed, but their seabed organization reflects 1) the location of the underlying structure (reservoir or trap) where the fluids are coming from, 2) the geometry and morphology of the reservoir/trap, and 3) the discontinuities in the sedimentary column along which fluids have migrated. In the LCB seafloor pockmarks are always associated with underlying tectonic structures (fault zones, salt diapirs, polygonal faults) or buried sedimentary bodies (turbiditic channels, erosional surfaces), whereas they never occur above sub-horizontal parallel-stratified fine-grained sediments. Even if triggering processes can not be clearly defined here, we propose a model of seafloor fluid seep organization, which represents a new tool for identifying the geometry of flow pathways and the underlying buried bodies where the fluids are originating from. This qualitative 3D model provides insight into the geohydrologic processes of continental margins.
ISSN: 0025-3227

hal-00406640
https://hal.archives-ouvertes.fr/hal-00406640
DOI : 10.1016/j.margeo.2007.06.003

Éditeur(s) : HAL CCSD
Résumé : International audience
The Corinth Rift is the most seismically active zone in Europe. Since the year 2000, the Corinth Rift Laboratory (CRL, http://crlab.eu) consisting in a multidisciplinary natural observatory, aims at understanding the mechanics of faulting and earthquake nucleation in the Rift. Recent studies have improved our view about fault geometry and mechanics within CRL but there is still a critical need for a better knowledge of the structure at depth.In this project, we aim to analyze the complete seismological database (13 years of recordings) of CRL by using recently developed methodologies of structural imaging in order to determine, with high resolution, the local 3D structure and the earthquake locations. We perform an iterative joint determination of 3D velocity model and earthquake coordinates. P and S velocity models are estimated through a first arrival traveltime tomography by using the adjoint state method proposed by Taillandier et al. (2009). It consists in the minimization of the cost function between observed and theoretical arrival times,which is achieved by estimating the gradient of the cost function. Earthquake locations are also estimated with a linearized inversion approach by computing the gradient of the misfit function. Iterations are repeated until the cost function no longer decreases. We present preliminary results consisting in: (1) the adjustment of a 1D velocity model that is used as initial model of the 3D tomography and (2) a first attempt of the joint determination of 3D velocity model and earthquake locations.We also perform a preliminary receiver function analysis of teleseismic data recorded by the broadband stations of the CRL network. The multiscale approach (Gesret et. al., 2010) analysis of teleseismic P to S converted waves allows to analyze the signal toward the higher frequencies and thus to characterize the structure at depth with a high resolution. Our multiscale approach should give us reliable depth of interfaces beneath seismometers in the CRL area. In this first attempt, we adjust the 1D velocity model that produces a synthetic RF as similar as possible to the stack of observed RF for a subset of data. The identified interfaces could then be compared with heterogeneities imaged by the tomography.
AGU Fall Meeting
San Fransico, United States

hal-01417184
https://hal-mines-paristech.archives-ouvertes.fr/hal-01417184

Éditeur(s) : HAL CCSD Springer
Résumé : Borehole logs provide in situ information about the fluctuations of petrophysical properties with depth and thus allow the characterization of the crustal heterogeneities. A detailed investigation of these measurements may lead to extract features of the geological media. In this study, we suggest a regularity analysis based on the continuous wavelet transform to examine sonic logs data. The description of the local behavior of the logs at each depth is carried out using the local Hurst exponent estimated by two (02) approaches: the local wavelet approach and the average-local wavelet approach. Firstly, a synthetic log, generated using the random midpoints displacement algorithm, is processed by the regularity analysis. The obtained Hurst curves allowed the discernment of the different layers composing the simulated geological model. Next, this analysis is extended to real sonic logs data recorded at the Kontinentales Tiefbohrprogramm (KTB) pilot borehole (Continental Deep Drilling Program, Germany). The results show a significant correlation between the estimated Hurst exponents and the lithological discontinuities crossed by the well. Hence, the Hurst exponent can be used as a tool to characterize underground heterogeneities.
ISSN: 1866-7411

hal-00617470
https://hal.archives-ouvertes.fr/hal-00617470
DOI : 10.1007/s12517-010-0129-y

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : We present a regional surface waveform tomography of the Pacific upper mantle, obtained using an automated multimode surface waveform inversion technique on fundamental and higher mode Rayleigh waves, to constrain the VSV structure down to ∼400 km depth. We have improved on previous implementations of this technique by robustly accounting for the effects of uncertainties in earthquake source parameters in the tomographic inversion. We have furthermore improved path coverage in the South Pacific region by including Rayleigh wave observations from the French Polynesian Pacific Lithosphere and Upper Mantle Experiment deployment. This improvement has led to imaging of vertical low-velocity structures associated with hotspots within the South Pacific Super-Swell region. We have produced an age-dependent averagecross-sectionforthePacificOceanlithosphereandfoundthattheincreaseinVSV with age is broadly compatible with a half-space cooling model of oceanic lithosphere formation. We cannot confirm evidence for a Pacific-wide reheating event. Our synthetic tests show that detailed interpretation of average VSV trends across the Pacific Ocean may be misleading unless lateral resolution and amplitude recovery are uniform across the region, a condition that is difficult to achieve in such a large oceanic basin with current seismic stations.
ISSN: 0956-540X

hal-00105949
https://hal.archives-ouvertes.fr/hal-00105949
https://hal.archives-ouvertes.fr/hal-00105949/document
https://hal.archives-ouvertes.fr/hal-00105949/file/Maggi_Pacif_tomo_GJI2006.pdf
DOI : 10.1111/j.1365-246X.2006.03037.x

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
In Taiwan, about one third of the lithospheric plate convergence between Eurasia and the Philippine Sea plate is accommodated on the eastern coast across the narrow Longitudinal Valley (LV). The Longitudinal Valley Fault (LVF) is the main seismically active fault zone in this region. However, the spatial distribution of ground deformation due to interseismic loading on locked fault segments remains widely unknown. To address this problem, we use a "permanent scatterer" (PS) interferometric synthetic aperture radar (InSAR) approach for processing the ERS satellite archives. The PS mean velocity maps allow accurately mapping and quantifying the ground deformation all along the LV. Assuming that, close to the surface, the fault plane along the central LVF creeping segment dips 55 degrees to the east, we derive a slip vector at the surface of similar to 25 mm/yr with a mean rake of 70 degrees. In agreement with our PS observations, shallow seismicity indicates a clear change in the fault mechanical behavior of the creeping segment around Fuli town. Finally, we propose a combination of the PS velocity fields for estimating a 3-D map of ground deformation. In the southern part of the LV, the vertical component reveals an uplift of the Coastal Range with respect to the LV of similar to 10 mm/yr. Moreover, between Taitung and Luyeh, the vertical deformation is essentially accommodated along the Luyeh Strand. Finally, north of Rueisuei, the Coastal Range uniformly subsides at similar to 15 mm/yr relative to the western side of the LV. However, a local uplift pattern is detected around latitude 23 degrees 42'.
ISSN: 0148-0227

hal-00595532
https://hal.archives-ouvertes.fr/hal-00595532
DOI : 10.1029/2010JB007898

Éditeur(s) : HAL CCSD Société géologique de France
Résumé : International audience
The Messinian salinity crisis (MSC) is characterized by gigantic erosion that remodels the margins while a thick, essentially evaporitic and detrital, sedimentary sequence forms in the deep basins. Based on recent (MAURESC, 2003) and earlier (MESEA 1, 1990; MAGIRAA, 1996; GEOBREST, 2002) seismic reflection data, this work brings to light the record of the MSC on the Provençal margin, which has until now been rarely explored from this perspective. Beyond its strictly regional interest, this study fits into a larger synthesis of MSC seismic markers in the Mediterranean and Black Sea marine domain [Lofi et al., 2011] and employs the new nomenclature established on this occasion. The results obtained reveal a Messinian detrital body (CU unit) of 625 metres maximum thickness at the foot of the margin, accumulating at the mouths of the principal canyons. Its form, facies and extension assimilate it to clastic fans, fed by subaerial erosion linked to the MSC. The relative geometry of CU and the Messinian units MU and UU deposited in the deep basin give indications to their chronostratigraphic relations. The deposition of the CU unit is posterior to the basal part of the mobile unit consisting of halite (MU), but contemporary to its top. These results agree with the recent scenarii, which propose that the precipitation of MU in the basin began early, during the lowering of the sea level, and ended at a low level during the MSC [Blanc, 2000; Martin et al., 2001; Sage et al., 2005; Ryan, 2009]. The UU unit surmounts MU and is subdivided into two sub-units with perceptibly different seismic facies : UU1 at the base and UU2 at the summit. UU1 could correspond to a unit containing more halite and/or more clastic material than UU2. The UU1 sub-unit could be partially contemporary to the CU unit. Concerning salt tectonics and its markers, three structural provinces have been evidenced in the sector of study, respectively : an upslope domain in extension (normal faults), an intermediary domain in translation (tabular MU) and a downslope domain in contraction (salt diapirs). These domains are directly linked to the gravity spreading and/or gliding of the brittle sedimentary cover formed by the CU, UU and Plio-Quatenary units and of the mobile level, MU. In the study area, a close relation between the distribution and thickness of CU and salt tectonics has additionally been evidenced at the mouths of the large Messinian canyons, being best expressed where CU is thick.
EISSN: 1777-5817

hal-00498286
https://hal.archives-ouvertes.fr/hal-00498286

Éditeur(s) : HAL CCSD
Résumé : Joint inversions are now commonly used in Earth Sciences. They have been developed to better understand Earth structure since they provide more constraints on the inverted parameters. We propose a new process to simultaneously invert several data sets in order to better image 3-D crustal and upper mantle structures. Our inversion uses 3 kind of data which present a good complementarity : (1) P receiver functions to provide Moho depth variations, (2) teleseismic delay times of P waves to retrieve velocity anomalies in the crust and upper mantle, (3) gravity anomalies to image density variations at lithospheric scale. In our scheme, receiver functions are first inverted. The resulting Moho depths are then interpolated and incorporated as a priori information into the joint inversion of teleseismic delay times and gravity anomalies process. In our new approach, we perform a model space search for Moho variations, P-velocity and density structure to find acceptable fit to the three data sets. In order to preferentially sample the good data fit region, we chose the Neighborhood algorithm of Sambridge to optimistically survey the model space. We model the delay times with a 3-D raytracing using velocity nodes evenly spaced and linked with density nodes via a linear relationship. This relationship can evolve through depth, simulating its pressure dependance. We test our scheme on synthetic examples, and apply the method in a continental rifting region where deformation processes are complex and badly known. This joint inversion thus provides more constraints on the inverted parameters, and allows us to better image crust - mantle interactions in the case of the Hangai dome (Central Mongolia). Indeed, in this area, we expect an asthenospheric upwelling to dynamically support the topography, but we image a density - velocity anomaly in the lower crust. The effects on topography and the origin (composition vs. thermal) of this anomaly are still under debate.
Les inversions conjointes sont maintenant communément utilisées en Sciences de la Terre. Elles ont été développées afin d'améliorer notre connaissance et compréhension de la structure interne de la Terre puisqu'elles apportent de plus en plus de contraintes sur les paramètres inversés. Dans cette thèse, nous proposons un nouveau processus d'inversion conjointe qui prend en compte trois paramètres différents et qui mène à l'obtention d'un modèle lithosphérique tridimensionnel. Notre méthode utilise trois types de données gravimétriques et sismologiques qui présentent une bonne complémentarité : (1) Les fonctions récepteur P afin d'obtenir les variations de profondeur du Moho, (2) les délais de temps d'arrivées P des téléséismes pour retrouver les anomalies de vitesse dans la croûte et le manteau supérieur, (3) les anomalies gravimétriques qui donnent accès aux variations de densité à l'échelle lithosphérique. Dans le schéma d'inversion proposé, nous inversons d'abord les fonctions récepteur. Les variations de profondeur du Moho qui en résultent sont alors interpolées puis incorporées comme information a priori dans le processus d'inversion conjointe gravimétrie - tomographie télésismique. Que ce soit pour les fonctions récepteur ou pour la partie conjointe, notre méthode d'inversion se base sur un algorithme de recherche afin de trouver la structure qui minimise l'écart aux trois types de données. Nous avons opté pour l'algorithme de voisinage qui présente l'avantage de concentrer sa recherche dans les régions qui minimisent l'écart aux données sans toutefois abandonner les autres régions afin de limiter les risques de convergence vers un minimum local. Nous utilisons un modèle 3-D constitué de noeuds de vitesse afin de modéliser les délais de temps. Ces noeuds de vitesse sont liés aux noeuds de densité grâce à une relation linéaire entre vitesse et densité. Cette relation peut évoluer avec la profondeur de manière à simuler les effets dus aux variations de pression. Nous avons réalisé plusieurs tests synthétiques afin d'évaluer le comportement de notre nouvelle méthode. Ils ont permis de montrer que les variations du Moho ainsi que les anomalies de vitesse et densité sont bien retrouvées. Ils ont également montré l'importance de la prise en compte de ces trois types de données dans un même schéma d'inversion, notamment en ce qui concerne la faculté de discerner les variations d'interfaces des anomalies volumiques. Nous avons ensuite appliqué la méthode dans une région continentale en phase de rifting où les processus de déformation sont complexes et mal connus. Notre nouvelle méthode a apporté davantage de contraintes sur les paramètres inversés et a permis d'obtenir un modèle correctement résolu de la croûte et du manteau supérieur sous le dôme de Hangai (Mongolie Centrale). Une anomalie asthénosphérique sous le dôme est souvent invoquée pour expliquer sa topographie élevée mais c'est une anomalie (en vitesse et densité) crustale (croûte inférieure) qui s'exprime dans nos modèles. Ses effets sur la topographie et son origine (compositionnelle et/ou thermique) sont encore débattus et nécessiteraient des études plus poussées (paramétriques, VP =VS, ...).
https://tel.archives-ouvertes.fr/tel-00783524

tel-00783524
https://tel.archives-ouvertes.fr/tel-00783524
https://tel.archives-ouvertes.fr/tel-00783524/document
https://tel.archives-ouvertes.fr/tel-00783524/file/Basuyau2011.pdf

Éditeur(s) : HAL CCSD Wiley
Résumé : Question: To establish a habitat classification based on functional group co-occurrence that may help the drawing up of conservation plans. Location: Riverine forest fragments in the Grand-duché de Luxembourg, Europe. Methods: Forest fragments were surveyed for their abundance of vascular plants. These were clustered into emergent groups according to 14 life-traits related 10 plant dispersal, establishment and persistence. Forest fragments were classified according to similar distribution of the identified emergent groups. Environmental factors were related to the emergent group richness in each forest type using generalized linear models. Results: Contrary to former species centred classification, only two groups of forests, each with clearly different emergent group composition and conservation requirements. Were detected: (1) swamp forests characterized by anemogamous perennials, annuals and hydrochorous perennials and (2) moist forests characterized by barochorous perennials, small geophytes and zoochorous phanerophytes. From a conservation point of view, priority should he given to large swamp forest with intact flooding regimes his is in accordance with the high wind and water dispersal capacities of their typical emergent groups. For the moist forests. conservation priorities should he high forest connectivity and historical continuity since dispersal and establishment of their characteristic emergent groups arc highly limited. Conclusions: The described methodology, situated at an intermediate integration level between the individual species and whole community descriptors. takes advantage of both conservation plans built for single species and the synthetic power of bread ecological measures.
ISSN: 1402-2001

hal-01031884
https://hal.archives-ouvertes.fr/hal-01031884

Éditeur(s) : HAL CCSD
Résumé : International audience
The Corinth Rift is the most seismically active zone in Europe. The area is characterized by very localized NSextension at a rate of1.5cm/year, the occurrence of frequent and intensive microseismic crises and occasionalmoderate to large earthquakes like in 1995 (Mw=6.1).Since the year 2000, the Corinth Rift Laboratory (CRL, http://crlab.eu) consisting in a multidisciplinary naturalobservatory, aims at understanding the mechanics of faulting and earthquake nucleation in the Rift. Recent studieshave improved our view about fault geometry and mechanics within CRL, but there is still a critical need for a betterknowledge of the structure at depth both for the accuracy of earthquake locations and for mechanical interpretationof the seismicity.In this project, we aim to analyze the complete seismological database (13 years of recordings) of CRL by usingrecently developed methodologies of structural imaging, in order to determine at the same time and with highresolution, the local 3D structure and the earthquake locations.We perform an iterative joint determination of 3D velocity model and earthquake coordinates. In a first step, Pand S velocity models are determined using first arrival time tomography method proposed by Taillandier et al.(2009). It consists in the minimization of the cost function between observed and theoretical arrival times which isachieved by the steepest descent method (e.g. Tarantola 1987). This latter requires computing the gradient of thecost function by using the adjoint state method (Chavent 1974). In a second step, earthquakes are located in thenew velocity model with a non-linear inversion method based on a Bayesian formulation (Gesret et al. 2015). Step1 and 2 are repeated until the cost function no longer decreases.We present preliminary results consisting in: (1) the adjustement of a 1D velocity model that is used as initialmodel of the 3D tomography and (2) a first attempt of the joint determination of 3D velocity model and earthquakelocation.In addition to the tomographic imaging, we perform a preliminary receiver function analysis of teleseismic datarecorded by the broadband stations of the CRL network. The RF analysis should provide the interface depthsbeneath seismometers and increase the imaging resolution of the upper crustal structures provided by the 3Dtomography. In this first attempt, we adjust the 1D velocity model that produces a synthetic RF as similar aspossible to the observed RF for a subset of data. We compare the identified interfaces with structures imaged bythe tomography.
EGU general assembly 2016
Vienne, Austria

hal-01306224
https://hal-mines-paristech.archives-ouvertes.fr/hal-01306224

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
Ash flow tuffs, or ignimbrites have been recently proposed to be a good material for palaeointensity determination. In this paper, we present a multidisciplinary study, combining geochronology, petrology, rock magnetism and palaeomagnetism, carried out on Oligocene to Early Miocene ignimbrites and related flows from the southern part of the Sierra Madre Occidental. Two new 40Ar/39Ar ages were determined for ignimbrites; 20.4 ± 0.2 Ma (the youngest age obtained so far in this area) and 29.2 ± 0.5 Ma. Density measurements, as a proxy for welding, proved to be extremely useful to estimate the emplacement temperature and the origin of the magnetizations carried by the ignimbrites. After alternating field and thermal demagnetizations, the mean palaeomagnetic pole (Lat = 66.8°N; Long = 180.5°E; Kappa = 142; A95 = 6.3°), calculated for the period 28-31 Ma, is in close agreement with our only Miocene determination. Comparison with the North America Synthetic Apparent Polar Path indicates a net counter-clockwise vertical axis rotation of about 10 ± 4° compared to stable North America, which occurred likely during the last extensional episode in the Late Miocene (ca. 12-9 Ma). Palaeointensity estimates, obtained with the Thellier-Coe method, are mainly questionable and should not be used for global interpretation. Therefore, these ignimbrites are not a viable material for reliable palaeointensity determinations.
ISSN: 0956-540X

hal-00854457
https://hal.archives-ouvertes.fr/hal-00854457
DOI : 10.1093/gji/ggt079

Éditeur(s) : HAL CCSD
Résumé : International audience
Metamorphic soles correspond to m to 500 m thick highly strained metamorphic rock units found beneath myloniticbanded peridotites at the base of large-scale ophiolites, as exemplified in Oman. Metamorphic soles aremainly composed of metabasalts deriving from the downgoing oceanic lithosphere and metamorphosed up togranulite-facies conditions by heat transfer from the mantle wedge. Pressure–temperature peak conditions areusually estimated at 1.00.2 GPa and 800100ºC. The absence of HP–LT metamorphism overprint implies thatmetamorphic soles have been formed and exhumed during subduction infancy. In this view, metamorphic soleswere strongly deformed during their accretion to the mantle wedge (corresponding, now, to the base of the ophiolite).Therefore, metamorphic soles and banded peridotites are direct witnesses of the dynamics of early subductionzones, in terms of thermal structure, fluid migration and rheology evolution across the nascent slab interface.Based on fieldwork and EBSD analyses, we present a detailed (micro–) structural study performed on samplescoming from the Sumeini window, the better-preserved cross-section of the metamorphic sole of Oman. Largedifferences are found in the deformation (CPO, grain size, aspect ratio) of clinopyroxene, amphibole and plagioclase,related to mineralogical changes linked with the distance to the peridotite contact (e.g., hardening due to theappearance of garnet and clinopyroxene).To model the incipient slab interface in laboratory, we carried out 5 hydrostatic annealing and simple-shear experimentson Griggs solid-medium apparatus. Deformation experiments were conducted at axial strain rates of 10-6s-1. Fine-grained amphibolite was synthetized by adding 1 wt.% water to a (Mid-Ocean Ridge) basalt powder asa proxy for the metamorphic sole (amphibole + plagioclase + clinopyroxene garnet assemblage). To synthetizegarnet, 2 experiments were carried out in hydrostatic conditions and with deformation at 800C with confiningpressure of 2 GPa. Another simple-shear experiment has been carried out at 800C and 1 GPa with fined-grainednatural garnet. With the aim of mimicking the early slab interface (between the metamorphic sole and bandedperidotites at the base of the ophiolite), 2 simple-shear deformation experiments with 2 layers have been carriedout at 800C and confining pressure of 1 GPa. The bottom layer was made of hydrated basalt powder and the toplayer was made of olivine.Fined-grained garnet-free amphibolite is significantly weaker than dunite but the appearance of harder mineralsin the amphibolite (garnet and clinopyroxene) has major implications on its rheological evolution. These resultsallow liking field observations of strain localization at the interface to the metamorphic sole formation
European Geosciences Union General Assembly 2016
Vienne, Austria

insu-01309394
https://hal-insu.archives-ouvertes.fr/insu-01309394

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Baikal Rift System in southern Siberia is one of the main intracontinental extensional features on Earth. The rift system represents the northwestern boundary of the Amuria plate and in that respect can be considered as an evolving plate boundary. The Baikal Rift System has been widely studied both in terms of geology and geophysics and many models have been proposed for its formation and evolution. However, the age of the initiation of deformation and the mechanism driving this deformation are still largely debated. While major extension has occurred since the Late Miocene-Pliocene, the onset of extension seems older than the India-Asia collision, implying that several driving mechanisms may have acted together or in relay through time. In this work, we review the available data and models for deformation in an area encompassing the Baikal Rift System, the Sayan ranges to the west and the Transbaikal to the east. Using a synthesis of this data and our own field and mapping observations, we show that the Baikal Rift System, along with transpressional deformation in the Sayan ranges and transtension in the Transbaikal area, can be explained through major left-lateral strike-slip systems. The deformation is strongly controlled by inherited crustal and lithospheric structures, and is distributed over a wide area within the western Amuria plate that consequently cannot be considered as a rigid block. Such distributed deformation is likely to have a strong effect on the structure of the future continental margin if extension evolves towards the formation of oceanic crust.
ISSN: 1342-937X

hal-00903612
https://hal.archives-ouvertes.fr/hal-00903612
DOI : 10.1016/j.gr.2012.07.017

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
In order to estimate the seismic anisotropy of subducted crust, polycrystalline samples of KA1Si(3)O(8) K-lingunite (25% of the total subducted transformed sediments), have been synthesized and deformed under the temperature and pressure conditions of the subducted slabs. Transmission electron microscopy (TEM) characterizations of the recovered samples reveal that the microstructures are clearly dominated by [001] glide involving screw dislocations. For this reason, only {100} could be identified as glide planes, the question of [001] slip on {110} remains open. Few 1/2 < 111 > dislocations were observed gliding on {110} planes, which implies that 1/2 < 111 > {110} is a harder slip system than those involving [001] slip. The occurrence of sub-grain boundaries suggests that diffusion and climb might be active under these conditions.;To assess the texture of polycrystalline K-lingunite, the crystal preferred orientations (CP05) were calculated using visco-plastic self-consistent (VPSC) polycrystalline plasticity model in simple shear using the slip systems identified by TEM. Finally, the seismic properties of K-lingunite aggregates were calculated from the CPO and single crystal elasticity tensor. K-lingunite is predicted to have a high seismic anisotropy, which could combine constructively with one of the stishovite (same proportion as K-lingunite at the transition zone depth ranges).
ISSN: 0031-9201

hal-00534050
https://hal.archives-ouvertes.fr/hal-00534050
DOI : 10.1016/j.pepi.2010.06.013

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Tarim and Junggar basins in central Asia are capped by a thick pile of conglomerates, called the Xiyu Formation, that are commonly linked to a change in climate and/or accelerated uplift near the Plio-Pleistocene boundary. In order to better understand their origin and significance, we carried out a combined structural and magnetostratigraphic study in the Quilitage syncline (southern Tianshan), where the base of the Xiyu conglomerates is observed at both sides of the syncline. A balanced cross-section shows that, even at a local-scale, the base of the Xiyu conglomerates cannot be regarded as a single continuous stratigraphic layer. On the southern flank of the Quilitage syncline, we collected 172 samples collected for magnetostratigraphic dating identify 17 polarity chrons that date the new section from 5.2 to ~ 1.7 Ma and constrain the base of the Xiyu conglomerate here at ~ 1.7 Ma. This is 4.2 Ma younger than the age of the Xiyu previously found on the northern limb of the same syncline. Together with other magnetostratigraphic studies carried out around the Tianshan, our study unambiguously demonstrates that the onset of deposition of the Xiyu conglomerates is diachronous, and that the conglomerates are systematically younger toward the basin. Consequently, the Xiyu Formation should not be considered as a chronostratigraphic marker related to any particular tectonic or climatic event, but is instead a prograding gravel wedge that has prograded over the underthrusting forelands. A synthesis of chronologic and structural results yields progradation rates over the last 10 Ma on the order of ~ 2.0 mm/yr and ~ 3.9 mm/yr south and north of the Tianshan Mountains respectively. These rates are comparable to the shortening rate across the Tianshan range, suggesting that underthrusting is the main factor governing the progradation rate of the Xiyu Formation.
ISSN: 0012-821X

insu-00414151
https://hal-insu.archives-ouvertes.fr/insu-00414151
https://hal-insu.archives-ouvertes.fr/insu-00414151/document
https://hal-insu.archives-ouvertes.fr/insu-00414151/file/Charreau-EPSL-2009.pdf
DOI : 10.1016/j.epsl.2009.07.035

Éditeur(s) : HAL CCSD
Résumé : The purpose of this work is to specify the deformation offshore East of Taiwan by characterizing major active faults in particular at the level of the Ryukyu forearc. The major problem associated with the study of this region is that earthquakes are located outside the permanent networks. Consequently, this led to some unprecise earthquake locations limiting tectonic and statistical analyses, and therefore the correct estimation of the seismic hazard. This work is included in the project ANR ACTS (Active Tectonics and Seismic Hazard in Taiwan). To achieve this goal, we worked on three different timescales for which a different localization method has been proposed to obtain a clear image of seismic deformation and highlight major faults offhore East of Taiwan. First, at the scale of the century (from the analysis of a seismicity catalogue with homogeneous magnitude), the instrumental historical earthquakes (1897-2007) show that the Ryukyu margin was affected by 6 earthquakes of magnitude greater than 7 with 4 of them for which the responsible fault is unknown. We propose a method of relative location to relocate the historic events from the time difference of P and S arrival times (Ts-Tp) at each station. The location is obtained by searching for "analogue" earthquakes in the recent instrumental catalogue (1991-2008) for which Ts-Tp at each station is close. This method has been applied to the largest (in terms of magnitude) earthquake ever recorded in Taiwan, the earthquake of June 5, 1920 (M7.7 +/- 0.2). A rupture along the interplate of the Ryukyu subduction with a possible nucleation at the downdip limit of a splay-fault is certainly responsible of this earthquake. Then, at the scale of the decade, the improvement of the method of absolute location based on MAXimum of Intersection of EDT (MAXI, EDT: Equal Differential Time) allows to better extract the erroneous arrival times and prevents the "trade-off" between depth and origin time, and between depth and epicentral position when the azimuthal coverage is low (gap Azimuthal > 180degre). Synthetic tests show the effectiveness of MAXI (using P-wave only) to determine the parameters x, y and z even when the azimuthal gap is important. In the latter case, the quality of the results is dependent on the velocity model to represent the 3D structure of the Earth. We propose an approach involving the use of a 3D a priori P-wave velocity model to locate earthquakes which are lateral and remote to the seismic network. An application to the case of Taiwan and Ecuador validates this approach. Finally, at the level of a few months, the marine geophysical campaign RATS (Ryukyu Arc: Tectonics and Seismology) was conducted in two stages. A passive seismology experiment from July to October, 2008 (RATS1) has been conducted over the forearc of the Ryukyus and then active seismic experiment (refraction and reflection) was conducted in May 2009 in a NNE - SSW line through the Ryukyu margin. These two combined experiments allow improving our knowledge about the crustal structure of the margin. At the level of the forearc, the basement of the forearc is characterized by vertical backstop and a very deformed basis certainly associated with a significant out of sequence deformation. In depth, the downgoing plate is certainly affected by a tear that controls the seismicity in the region of transition between the subduction and collision.
Le but de ce travail est de préciser la déformation en mer à l'est de Taïwan et de notamment caractériser les failles actives majeures en particulier au niveau de l'avant-arc des Ryukyus. Le problème majeur associé à l'étude de cette région est que les séismes sont localisés en dehors des réseaux permanents et que cela conduit à des localisations peu précises limitant les analyses statistiques, tectoniques et donc l'estimation correcte de l'aléa sismique. Ce travail est inclus dans le projet ANR ACTS (Active Tectonics and Seismic Hazard in Taiwan). Pour atteindre cet objectif, nous travaillons à trois échelles de temps différentes pour lesquelles une méthode de localisation différente a été proposée pour obtenir une image précise de la déformation sismique et mettre en évidence les failles majeures en mer à l'est de Taïwan. D'abord, à l'échelle du siècle (à partir de l'analyse d'un catalogue de sismicité homogène en magnitude), les séismes historiques instrumentaux (1897-2007) montrent que la marge des Ryukyus a été affectée par 6 séismes de magnitude supérieure à 7 dont 4 pour lesquels la faille responsable n'est pas connue. Nous proposons une méthode de localisation relative qui permet de relocaliser les évènements historiques à partir des différences de temps d'arrivées P et S (Ts-Tp) à chaque station. La localisation est obtenue en recherchant les séismes analogues dans le catalogue instrumental récent (1991-2008) pour lesquels Ts-Tp à chaque station est proche. Cette méthode a été appliquée au plus gros séisme (en terme de magnitude) jamais enregistré à Taïwan, le séisme du 5 juin 1920 (M7.7 $pm$ 0.2). Ce séisme a certainement pour origine une rupture sur l'interplaque sismogène de la subduction des Ryukyus avec une possible nucléation à la base d'une faille hors-séquence. Ensuite, à l'échelle de la dizaine d'années, l'amélioration de la méthode de localisation absolue du MAXimum d'Intersection EDT (MAXI, EDT: Equal Differential Time) permet de mieux extraire les temps d'arrivées erronés et empêche les "trade-off" entre profondeur et temps d'origine et, entre profondeur et position épicentrale lorsque la couverture azimutale est faible (gap azimutal > 180°). Des tests synthétiques montrent l'efficacité de MAXI (en utilisant les ondes P uniquement) à déterminer les paramètres x, y et z même lorsque le gap azimutal est important. Dans ce dernier cas, la qualité des résultats reste dépendant du modèle de vitesse à représenter la structure 3D de la Terre. Nous proposons une démarche associant l'utilisation d'un modèle de vitesse des ondes P 3D a priori avec la méthode MAXI pour localiser les séismes qui sont latéraux et éloignés du réseau. Une application au cas de Taïwan et en Équateur valide cette approche. Enfin, à l'échelle de quelques mois, la campagne de géophysique marine RATS (Ryukyu Arc: Tectonics and Seismology) a été menée en deux temps. Une expérience de sismologie passive de juillet à octobre 2008 (RATS1) a été menée au-dessus de l'avant-arc des Ryukyus puis une expérience de sismique active (réfraction et réflexion) a été menée en mai 2009 sur une ligne NNE-SSW à travers la marge des Ryukyus. Ces deux expériences combinées permettent d'améliorer notre connaissance de la structure crustale de la marge. Au niveau de l'avant-arc, le socle de l'avant-arc est caractérisé par une extrémité formant un butoir vertical et une base très déformée certainement associée à une importante déformation hors-séquence. En profondeur, la plaque plongeante est certainement affectée par une déchirure qui contrôle la sismicité dans cette région de transition entre la subduction et la collision.
https://tel.archives-ouvertes.fr/tel-00660737

tel-00660737
https://tel.archives-ouvertes.fr/tel-00660737
https://tel.archives-ouvertes.fr/tel-00660737/document
https://tel.archives-ouvertes.fr/tel-00660737/file/Thesis_small.pdf