Éditeur(s) : HAL CCSD Elsevier
Résumé : Une approche par datations multiples a été menée sur les dépôts de sédiments de crue retrouvés dans les gorges du Gardon (Languedoc). Le plomb-210, le césium-137 et l’analyse géochimique des sédiments contaminés par les mines ont été utilisés pour reconstruire l’histoire des dépôts de crue. Cette approche a été combinée avec l’historique des crues du Gardon depuis 1890 pour affiner l’approche géochronologique. Au niveau de la cavité GG et de la terrasse GE les analyses ont permis d’illustrer les mécanismes d’érosion-redéposition pouvant perturber les séquences de sédiments. Les enregistrements des dépôts de sédiments de crue sont complets sur la terrasse GE située à 10 m au-dessus du lit mineur à partir de 1958, et incomplets auparavant. Sur la période 1880-1958, 25 crues ont eu un débit suffisant (>1450 m3/s) pour recouvrir la terrasse, alors que l’on recense seulement 5 à 6 crues depuis 1958 (pour un débit de submersion supérieur à 1700 m3/s). L’augmentation progressive du débit de submersion et la fréquence moindre d’inondation de la terrasse ont pu permettre sur la période récente la stabilisation de la couche de surface par la végétation et limiter l’érosion lors de crues importantes. Les enregistrements semblent complets dans la cavité GG située à 15 m au-dessus du lit mineur. La fréquence moindre de submersion à ce niveau plus élevé peut expliquer une meilleure stabilisation des dépôts de crue, rendus moins vulnérables à l’érosion. La datation au radiocarbone a été testée même si elle ne permet pas de dater avec précision les dépôts de crue des derniers siècles. Sur la terrasse GE, 80% des dates au carbone 14 sur charbon de bois sont beaucoup trop vieilles par rapport aux autres techniques de datation, ce qui peut s’expliquer par une remobilisation/déstockage de charbons de bois anciens. Les datations radiocarbone sur graines donnent de meilleurs résultats, car issues d’une production annuelle, plus facilement décomposable et moins sujette à des dépôts intermédiaires. Au final, il apparaît que la technique de datation par radiocarbone sur des charbons de bois retrouvés dans les séquences sédimentaires n’est pas fiable, alors qu’elle est la plus pratiquée en paléo-hydrologie. L’utilisation combinée du plomb-210, du césium-137, de l’analyse géochimique des sédiments et des informations sur les crues historiques a permis de discriminer et de dater les différents dépôts de crue de ce dernier siècle dans la cavité GG et la terrasse GE. / A multidating approach was carried out on slackwater flood deposits, preserved in valley side rock cave and terrace, of the Gardon River in Languedoc, southeast France. Lead-210, caesium-137, and geochemical analysis of mining-contaminated slackwater flood sediments have been used to reconstruct the history of these flood deposits. These age controls were combined with the continuous record of Gardon flow since 1890, and the combined records were then used to assign ages to slackwater deposits. The stratigraphic records of terrace GE and cave GG were excellent examples to illustrate the effects of erosion/preservation in a context of a progressively self-censoring, vertically accreting sequence. The sedimentary flood record of the terrace GE located at 10 m above the channel bed is complete for years post-1958 but incomplete before. During the 78-year period 1880-1958, 25 floods of a sufficient magnitude (> 1450 m3/s) have covered the terrace. Since 1958, however, the frequency of inundation of the deposits has been lower:only 5 or 6 floods in 52 years have been large enough to exceed the necessary threshold discharge (> 1700 m3/s). The progressive increase of threshold discharge and the reduced frequency of inundation at the terrace could allow stabilisation of the vegetation cover and improved protection against erosion from subsequent large magnitude flood events. The sedimentary flood record seems complete for cave GG located at 15 m above the channel bed. Here, the low frequency of events would have enabled a high degree of stabilisation of the sedimentary flood record, rendering the deposits less susceptible to erosion. Radiocarbon dating are used in this study and compared to the other dating techniques.Eighty percent of radiocarbon dates on charcoals were considerably older than those obtained by the other techniques in the terrace. On the other hand, radiocarbon dating on seeds provided better results. This discrepancy between radiocarbon dates on charcoal and seeds is explained by the nature of the dated material (permanent wood vs. annual production and resistance to degradation process). Finally, we showed in this study that although the most common dating technique used in paleoflood hydrology is radiocarbon dating, usually on charcoal preserved within slackwater flood sediments, this method did not permitus to define a coherent age model. Only the combined use of lead-210, caesium-137, and geochemical analysis of mining-contaminated sediments with the instrumental flood record can be applied to discriminate and date the recent slackwater deposits of the terrace GE and cave GG.
ISSN: 0169-555X

hal-01059669
https://hal.archives-ouvertes.fr/hal-01059669
https://hal.archives-ouvertes.fr/hal-01059669/document
https://hal.archives-ouvertes.fr/hal-01059669/file/ly2014-pub00040953.pdf
IRSTEA : PUB00040953

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
The objective of this study was to realize a three-dimensional (3-D) geological model of the deep basin structure of the Middle Durance region (of folds and faults) by integration of geological and geophysical data, and to evaluate its fault geometry and tectonic history. All of the available geophysical and geological data were compiled in three dimensions using the gOcad geomodeler. The geological and geophysical data were used to build a 3-D geological model of the Middle Durance region. The data on the 3-D geometry of fault surfaces and stratigraphic horizons and the thickness maps of the main stratigraphic units are supported by the 3-D geological model. We show that the Middle Durance Fault cannot be interpreted as a single fault plane that affected the entire Meso-Cenozoic sedimentary layers and the Paleozoic basement but as a listric segmented faulting system in sedimentary layers, rooted in Triassic evaporites and a normal block faulting system in the basement. This decoupling level in the Triassic layers reveals thin-skin deformation, formed by strong mechanical decoupling between the Mesozoic sedimentary cover and the Paleozoic basement. This study also confirms that the Provence geological structure has resulted mainly from Pyrenean deformation, which was partly reactivated by Alpine deformation. We demonstrate that the Middle Durance Fault Zone is a transfer fault that accommodates deformation of the sedimentary filling of the South-East Basin through modified fold geometry over a zone of 7 km to 8 km around the main segment of the fault zone.
ISSN: 0278-7407

hal-01172221
https://hal.archives-ouvertes.fr/hal-01172221
DOI : 10.1002/2014TC003749

Éditeur(s) : HAL CCSD Geological Society of America
Résumé : International audience
In this study, a novel application of a statistical approach is utilized for analysis of downhole logging data from Miocene-aged siliciclastic shelf sediments on the New Jersey Margin (eastern USA). A multivariate iterative nonhierarchical cluster analysis (INCA) of spectral gamma-ray logs from Integrated Ocean Drilling Program (IODP) Expedition 313 enables lithology within this siliciclastic succession to be inferred and, through comparison with the 1311 m of recovered core, a continuous assessment of depositional sequences is constructed. Signifi cant changes in INCA clusters corroborate most key stratigraphic surfaces interpreted from the core, and this result has particular value for surface recognition in intervals of poor core recovery. This analysis contributes to the evaluation of sequence stratigraphic models of large-scale clinoform complexes that predict depositional environments, sediment composition, and stratal geometries in response to sea-level changes. The novel approach of combining statistical analysis with detailed lithostratigraphic and seismic refl ection data sets will be of interest to any scientists working with downhole logs, especially spectral gamma-ray data, and also provides a reference for the strengths and weaknesses of multi component analysis applied to continental margin lithofacies. The method presented here is appropriate for evaluating successions elsewhere and also has value for hydrocarbon exploration where sequence stratigraphy is a fundamental tool.
EISSN: 1553-040X

insu-00858238
https://hal-insu.archives-ouvertes.fr/insu-00858238
DOI : 10.1130/GES00913.1

Éditeur(s) : HAL CCSD Société géologique de France
Résumé : In the western Mediterranean Sea, the Liguro-Provençal Basin (LPB) is a key area for studying passive margins because of its recent formation and abundance of onshore and offshore data. The Nerthe area located in the northern margin of LPB provides the unique continuous Oligo-Miocene deposits contemporaneous of the transition rifting to drifting. However, the age of the deposits remains debated and the link between outcrops and offshore seismic data is poorly constrained. The purpose of this paper is double. First, we intend to propose a new chronostratigraphic frame based on bio- (planktonic foraminifera, calcareous nannofossils) and magneto-stratigraphy. Second, we aim to make, through the integration of new highly time-resolved seismic data and field works, a coherent onshore-offshore link concretized by a 3D geological model. The new temporal and spatial data presented in this paper allow correlating the Oligo-Miocene sequences, defining their geometry and specifying precisely the timing of syn- and post-rift stages. The first marine transgression is now precisely dated latest Chattian within the syn-rift deposits and appears to be synchronous with the first marine deposits in the offshore wells and other marginal basins. The transition from syn-rift to post-rift appears to last 3.3 Ma at maximum, between 21.8 and 18.5 Ma (late Aquitanian to early Burdigalian). It is underlined by two major erosional unconformities bearing a hiatus of around 1 Ma. The post-rift started with a major marine transgression that is now dated from middle Burdigalian, at around 18.5 Ma, as elsewhere in the LPB. Contrarily to recent proposals, the post-rift deposits are widely represented on the northeastern margin of the "Golfe du Lion". There, the subsidence of the margin was low during the syn-rift and the transitional periods and high during the post-rift. The onset of this high post-rift subsidence appears to be synchronous with the slowdown of the Corsica-Sardinia block (CSb) motion.
EISSN: 1777-5817

hal-00558497
https://hal.archives-ouvertes.fr/hal-00558497
DOI : 10.2113/gssgfbull.181.6.591

Éditeur(s) : American Geophysical Union
Résumé : [1] A multiproxy integrated chronological framework, based on oxygen and carbon stable isotope stratigraphy, biostratigraphy (foraminifera and nannoplankton bioevents and foraminifer assemblage-based climate cyclicity), magnetostratigraphy, sapropel stratigraphy, and C-14 AMS radiometric dates, has been achieved for borehole PRAD1-2, collected in 185.5 m water depth in the central Adriatic. This work was carried out within the European Community project Profiles across Mediterranean Sedimentary Systems (PROMESS1). The 71.2 m long borehole spans a time interval between late MIS 11 and MIS 1 (the last 370 ka), showing a chronological resolution of 500 and 250 years per cm during interglacial and glacial intervals, respectively. At present, this record is the most expanded and continuous marine record available for the Adriatic Basin. Several orbital cycles can be recognized in the PRAD1-2 record: the 100 ka glacial-interglacial fluctuations and the 23 ka precession-related cycles, which in turn control the deposition of sapropel layers. An integrated analysis of short-term oscillations within the Last Glaciation interval (MIS 4-MIS 2) allowed the identification of the Adriatic signature of Dansgaard-Oeschger events, showing the potential to achieve a more refined chronostratigraphic framework for the top part of the PRAD1-2 record. Finally, the age model obtained by this study allowed the chronological integration of the main foraminifera bioevents detected in the borehole as well as of the volcanoclastic layers present in the upper part of the record. Despite its proximal location, PRAD1-2 presents a continuous record and shows the potential to be consistently correlated both with deep-sea and continental records in the Mediterranean region and beyond.
Geochemistry Geophysics Geosystems (1525-2027) (American Geophysical Union), 2008 , Vol. 9 , P. NIL_107-NIL_127

Droits : 2008 American Geophysical Union
http://archimer.ifremer.fr/doc/2008/publication-3605.pdf
DOI:10.1029/2007GC001713
http://archimer.ifremer.fr/doc/00000/3605/

Éditeur(s) : HAL CCSD
Résumé : The Deep Basin of the Gulf of Mexico (DBGM) extends over eastern Mexico, the southeastern part of the United States, west of the Atlantic Ocean. This study, based on the interpretation and integration of seismic profiles, exploration wells and outcrop studies, focus on the deep part of the Gulf of Mexico, where bathymetry varies from 200 to 3750 m, thus comprising both the continental slope and the abyssal plain. The first part of this thesis focus on the description of the sedimentary infill of the western part of the Gulf of Mexico, in the Veracruz State, and to its geodynamic controls. The geodynamic evolution of the Deep Basin of the Gulf of Mexico (DBGM) begins during the Triassic-Jurassic with the break-up and the opening of a continental rift, in the southern part of the North American lithospheric plate. This opening induced a relative movement of the Yucatan Block towards the southeast. This intra-continental rifting episode was followed by a stage of post-rift thermal subsidence in the basins of the continental margin in the west, coeval with oceanic accretion in the DBGM. The thermal subsidence of the margin was subsequently modified by the Laramian orogeny, which impacted strongly the overall architecture of the margin as well as its litho-stratigraphic evolution, inducing the deposition of siliciclastic deposits in various morphotectonic provinces: i.e., near the tectonic front of the Sierra Madre Oriental (SMO), within the adjacent Chicontepec foreland basin, over the Tuxpan Platform (Golden Lane), across the continental slope and up to the deep abyssal plain, these two last morphotectonic provinces belonging to the DBGM. During the Early Paleogene, the effects of the thermal subsidence of the passive margin were stressed by the tectonic load of the Laramian orogen (i.e., the Sierra Madre Oriental, SMO), thus allowing the development of a foreland basin flexural. In this geodynamic framework, the main sedimentary transfers developed from the tectonic front "SMO" in the west, towards the DBGM in the east, the main source for clastic sediments being linked to the erosion of the "SMO" mountains. During the Paleocene and the Early Eocene, the architecture of the silici-clastic syn-tectonic sediments deposited in submarine fans was characterized by sliding, turbidites with A and B Bouma facies, as well as levees and channels. After the stop of the flexural subsidence, the thermal subsidence of the passive margin resumed during the Late Eocene, the Oligocene and the Neogene, allowing the development of a new sedimentary prism, prograding eastwards toward the DBGM. This sedimentary infill was again made up of levees-channels, sand bars and delta systems. During the Neogene, an extensional system with listric faults and roll-over features developed across the slope of the DBGM, due to an active detachment developing within overpressured Eocene-Oligocene clays. This gravitational gliding of Neogene series accounted also for the development of compressional features at the toe of the slope. Approximately 60% of the Miocene siliciclastic sediments have been trapped in growth strata and slope basins associated with this complex gravitational system, ranging from river-delta features towards gravity slides associated with slump facies. The second part of this thesis aims at a quantification of these various processes, including the construction of balanced cross sections, forward Thrustpack kinematic modelling coupling the development of a basal detachment, lithospheric flexure, erosion and sedimentation, as well as subsequent stratigraphic modelling with the Dionisos software, the later aiming at predicting the sand versus clay ratios in Neogene siliciclastic deposits of the DBGM and its surroundings.
Le bassin profond du Golfe du Mexique (BPMG) est localisé à l'est du Mexique, au sud-est des États-Unis et à l'ouest de l'Océan Atlantique. Cette étude de la partie profonde du Golfe du Mexique est basée sur l'intégration de données de sismique, de forages pétroliers et d'études de terrain; elle comprend toute la pente continentale et la plaine abyssale, avec une bathymétrie qui varie de 200 à 3750 m. La première partie de cette thèse est consacrée à la description du remplissage sédimentaire de la bordure occidentale du Golfe du Mexique, dans le secteur de Veracruz, en liaison avec son évolution géodynamique. L'évolution géodynamique du BPMG commence au Trias-Jurassique avec la rupture et la propagation d'un rift continental, dans le secteur sud de la plaque nord américaine. Cette ouverture et le déplacement relatif vers le sud-est du bloc crustal du Yucatan sont à l'origine du BPGM. Cette géodynamique de rift continental est suivie d'une étape post-rift accompagnée de l'océanisation du bassin. Les bassins de la marge passive ont poursuivi leur évolution sous l'effet de la subsidence thermique à l'ouest du Golfe du Mexique, tandis que de la croûte océanique se formait dans le BPGM. Cette subsidence thermique de la marge a ensuite été perturbée par l'orogénèse Laramienne, qui a remodelé l'architecture stratigraphique silico-clastique des dépôts du Tertiaire entre les éléments morphotectoniques suivants: lefront tectonique de la Sierra Madre Orientale (SMO), le bassin d'avant-pays Chicontepec, la Plateforme de Tuxpan-Faja de Oro, la pente continentale et la plaine abyssale, ces deux dernières provinces morphotectoniques appartenant au BPGM. Pendant le Paléogèneinférieur, les effets de la subsidence thermique de la marge passive ont été accentués par la charge tectonique de l'orogénèse laramienne (SMO), permettant ainsi le développement d'un bassin flexural d'avant-pays. Au cours de cette étape, les principaux transferts sédimentaires se sont effectués du front tectonique "SMO" vers le BPGM. La source principale de sédiments clastiques est liée à l'érosion de la chaîne de montagnes "SMO". Pendant le Paléocène et l'Éocène inférieur, l'architecture des premiers sédiments silico-clastiques syn-tectoniques déposés dans des éventails sous-marins sont caractérisés par des figures de glissement, des faciès turbiditiques A et B de Bouma, des chenaux-levées. Après l'arrêt de la subsidence flexurale, la subsidence thermique de la marge passive s'est poursuivie pendant l'Éocène supérieur, l'Oligocène et le Néogène, permettant le développement d'un nouveau prisme sédimentaire progradant. Les remplissages sédimentaires sont encore constitués de chenaux et de levées, avec des barres de sable associées à des systèmes deltaïques sur la plateforme. Pendant le Néogène, un système de failles listriques s'est développé sur la pente du BPGM, au-dessus d'une surface de décollement située, dans la région d'étude, dans les argiles de l'Éocène-Oligocène. Ce système de failles de croissance a piégé plus de 60% des sédiments silico-clastiques du Miocène. Ce remplissage sédimentaire évolue latéralement de faciès fluviaux deltaïques vers des faciès de pente affectés de glissements gravitaires et associés à des turbidites. La deuxième partie de cette thèse est consacrée à une approche quantitative basée sur des modélisations structurales (coupes équilibrées et modélisations cinématiques directes avec Thrustpack, couplant décollement gravitaire, flexure lithosphérique, érosion et sédimentation), puis sédimentaires (prise en compte des transferts de matériel clastique depuis la partie émergée de la chaîne jusqu'au bassin profond, à l'aide du logiciel Dionisos, afin de mieux comprendre les processus de piégeage des sédiments grossiers dans les structures de croissance et les bassins perchés de la marge.
https://tel.archives-ouvertes.fr/tel-00435120

tel-00435120
https://tel.archives-ouvertes.fr/tel-00435120
https://tel.archives-ouvertes.fr/tel-00435120/document
https://tel.archives-ouvertes.fr/tel-00435120/file/thesealzaga.pdf

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Dien Bien Phu (DBP) Fault strikes nearly perpendicular to the general tectonic framework, separating northwest Vietnam into two compartments. The DBP and Muong Lay granites are exposed respectively east and west of the fault. The U/Pb age of 277 ± 2 Ma obtained for the Muong Lay granite is similar to the age of the Chieng Khuong complex exposed within the Song Ma structure east of the DBP Fault. These two magmatic intrusions are considered as belonging to a same tectonic structure related to the subduction of the Song Ma Ocean under the Indochina Block during the Indosinian orogeny. The DBP Fault with a total post Permian dextral offset of 30-40 km shifts the Song Ma Suture. It could then be connected to the Ailao Shan-Shuanggou suture to the north. The undeformed DBP granite gave a U/Pb age of 230 ± 1 Ma sealing the Indosinian deformation on the fault. The Ladinian-Carnian activity of the fault is confirmed by the 40Ar/39Ar (biotite) age of 228 ± 4 Ma obtained from the paragneiss forming the fault zone. A geodynamic model is proposed to describe the various tectonic phases recorded by on the DBP Fault. It associates field data, stratigraphic observations, and geochronology analyses (U/Pb, Ar/Ar, fission tracks). Following the Late Triassic exhumation of the granite and the end of the Indosinian orogeny marked by the Norian unconformity, the granite was buried under Jurassic and Lower Cretaceous sediments. A strong cooling event during the early Late Cretaceous (100 Ma) is associated with the reactivation of the DBP Fault and the accommodation of a southward thrusting of the Song Da terrane onto the Truong Son Belt. This newly recognised tectonic phase could be associated to the subduction of the Paleo-Pacific plate under the Indochina Block. No data are available yet to constrain the Tertiary evolution of the DBP system. However, the Tertiary deformation is likely similar to the Cretaceous one.
ISSN: 1342-937X

insu-01015379
https://hal-insu.archives-ouvertes.fr/insu-01015379
DOI : 10.1016/j.gr.2013.07.018

Éditeur(s) : HAL CCSD EDP Sciences
Résumé : International audience
This paper presents a paleo-hydrological study conducted on sediment flood deposits at two sites located in the Gardon Gorges, Southeast France. The first study site is a valley‑side terrace (referred to as site GE, located 10m above the channel bed) and the second is located in a cave (referred to as site GG, perched 15m above the bed level). Paleo‑flood events were identified by carefully analyzing each slackwater flood deposits. The flood units were then dated using a variety of dating techniques, namely 137Cs, 210Pbex, 14C geochemical analysis of mining‑contaminated slackwater flood sediments, archeological objects and the historic flood record. Hydraulic modeling was also carried out in order to verify the coherence between the stratigraphic records of flood deposits at the sites and the historic flood levels known along the river Gardon. It is demonstrated that all the major flood events of the 20th century can be identified at terrace GE. This type of geomorphological unit can therefore be used as a sound basis for a paleo-hydrological analysis of the Gardon Gorges. Furthermore, the analysis of the stratigraphic record at site GG demonstrates that the site can be used to trace the largest flood events that have occurred within the past 600 years. The study reveals that the frequency of extreme flood events increased during the Little Ice Age
Une étude paléo-hydrologique a été entreprise dans les Gorges du Gardon, où deux coupes sédimentaires ont été étudiées. La première provient d'une terrasse (coupe GE située à 10 m de hauteur au dessus de la rivière) et l'autre, d'une cavité (coupe GG localisée à 15 m au-dessus de la rivière). L'identification et la mise en évidence des différents paléo-événements de crue ont été établies grâce à l'inspection minutieuse de chaque dépôt sédimentaire et d'une étude géochronologique fine (137Cs, 210Pbex, 14C, métaux traces, objets archéologiques, historiques des crues). Nous avons souhaité évaluer la capacité des terrasses fluviatiles du Gardon à enregistrer des paléo-événements en comparant les coupes sédimentaires aux données historiques des hauteurs d'eau et aux résultats d'un modèle hydraulique 1D. Nous montrons que la terrasse GE enregistre la quasi-totalité des évènements du 20ème siècle et qu'à priori, ce type d'objet géomorphologique peut être utilisé pour toute étude paléo-hydrologique sur le Gardon. De plus, l'étude de la coupe GG (cavité perchée à 15 m) permet de reconstituer les évènements intenses au cours des 600 dernières années. Nous montrons une augmentation des crues extrêmes dans le Haut-Languedoc au cours du "Petit âge glaciaire".
ISSN: 0018-6368

hal-01108400
https://hal.archives-ouvertes.fr/hal-01108400
https://hal.archives-ouvertes.fr/hal-01108400/document
https://hal.archives-ouvertes.fr/hal-01108400/file/ly2014-pub00041935.pdf
DOI : 10.1051/lhb/2014037

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
3D seismic data located in the Gjallar Ridge (Vøring Basin, offshore Norway) reveals a closely-spaced polygonal fault system affecting more than 800 m of homogeneous mud-dominated Quaternary and Tertiary sequences. As some faults reach the modern seafloor, they represent an active polygonal fault system at present day. Even if the processes remain unclear and are still under debate, it is generally agreed that the initiation of polygonal faults is the result of shallow burial dewatering of fine-grained unconsolidated sediments by volumetric compaction. 3D seismic data are commonly interpreted by propagating horizons automatically and by picking faults manually. However, in the case of polygonal fault intervals, this approach is time consuming due to the huge number of faults and because automatic propagation can be misleading. In this study, we applied a new technique of 3D seismic interpretation based on a sequential stratigraphy analysis, using the new PaleoScan© software (Eliis Company). It allowed us to build a 3D geological model computing more than 300 horizons within the faulted intervals. We then used the coherency attribute, depicting anomalies in the shape of seismic waveform like faults, in order to constrain a possible link between fault distribution and stratigraphic levels. Our approach allows fault throws to be calculated in milliseconds on any polygonal fault plane. The result shows that fault segments have been reactivated by dip-linkage. Distribution of faults depends on mechanical units, intervals characterized by different petrophysical properties, which are independent from lithological and diagenetic changes. According to these results, we propose a model showing the evolution of polygonal fault intervals in which faulting stages are separated by a quiescence phase during burial. A first tier of polygonal faults is initiated at a specific depth, according to the Cam-clay model. Then, following a period of quiescence during which mud-rich sediments continued to accumulate, new fault segments are initiated above the first mechanical unit and within this undeformed interval. New nucleated faults then connect downward to pre-existing underlying polygonal fault system, thus progressively increasing the thickness of the faulted interval.
ISSN: 0025-3227

hal-00772470
https://hal.archives-ouvertes.fr/hal-00772470
DOI : 10.1016/j.margeo.2012.07.016

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Tethyan ophiolites show an apparent poorly organized association of ultramafic andmafic rocks. By contrast tothe complete mantle-crustal sections of Semail-type ophiolite sheets, Tethyan ophiolites are characterized by asmaller amount of mafic rocks (gabbros and basalts), by the absence of any sheeted dyke complex and by thefrequent occurrence of oceanic sediments stratigraphically overlying mantle-derived peridotites and associatedgabbroic intrusions. Therefore, they are considered as typical remnants of oceanic lithosphere formed in slowspreadingenvironment or in ocean–continent transition at distal passive margins. In the very first models offormation of the Tethyan ophiolites, in the years 1980, the geodynamical processes leading to mantle unroofingwere poorly understood due to the paucity of data and concepts available at that time from the present-dayoceans. In particular, at that time, little work had focused on the distribution, origin and significance ofmafic rocks with respect to the dominant surrounding ultramafics. Here, we reconsider the geology of sometypical metaophiolites from the Western Alps and Corsica, and we show how results from the past decadeobtained in the current oceans ask for reassessing the significance of the Tethyan ophiolites in general. Revisitedexamples include a set of representative metaophiolites from the blueschists units of the Western Alps (Queyrasregion) and from Alpine Corsica (Golo Valley). Field relationships between the ophiolitic basement andthe metasedimentary/metavolcanic oceanic cover are described, outlining a typical character of the Tethyanophiolite lithological associations. Jurassic marbles and polymictic ophiolite metabreccias are unconformablyoverlying the mantle-gabbo basement, in a way strictly similar to what is observed in the non-metamorphicAppennine ophiolites or Chenaillet massif. This confirms that very early tectonic juxtaposition of ultramafic andmafic rocks occurred in the oceanic domain before subduction. This juxtaposition resulted from tectonic activitythat is now assigned to the development of detachment faults and to the formation of Oceanic Core Complexes(OCCs) at the axis of slow spreading ridges. This fundamental Plate Tectonics process is responsible for the exhumationand for the axial denudation of mantle rocks and gabbros at diverging plate boundaries. In addition, fieldrelationships between the discontinuous basaltic formations and the ultramafic–mafic basement indicate that thistectonic stage is followed or not by a volcanic stage.We discuss this issue in the light of available field constraints.
ISSN: 0012-8252

insu-01096467
https://hal-insu.archives-ouvertes.fr/insu-01096467
https://hal-insu.archives-ouvertes.fr/insu-01096467/document
https://hal-insu.archives-ouvertes.fr/insu-01096467/file/Lagabrielle-EarthSciRev-2014.pdf
DOI : 10.1016/j.earscirev.2014.11.004

Éditeur(s) : HAL CCSD
Résumé : The Franceville Basin (2.1 Ga) in southeastern Gabon, hosts a black shale series well preserved (FB Formation) which represents an exceptional example of unmetamorphised Paleoproterozoic sediment strata. This basin includes the protore of one of the largest Mn-oxide laterite ore worldwide, mined by Eramet-Comilog. The aim of this this work is to determine formation conditions of this protore and to characterize the global sedimentary evolution of the FB Formation which include the protore. This 75 m thick protore is constituted of Mn carbonate-rich black shales which represent a potential ore deposit for the future. It was drilled, on the Bangombé plateau, during a recent campaign of 24 boreholes with an average depth of 125 m.Through multidisciplinary study on these cores and key outcrops of the basin, this work focuses on : i) the depositional environment of the Mn-protore and FB Formation ; ii) the processes of formation of the Mn-carbonates at 2.1 Ga and iii) the architecture and distribution of Mn-rich levels of the protore on the Bangombé Plateau.A detailed sedimentological and petrological study allowed us to redefine the division of the FB into nine units, named U1 to U9 from the base to the top. These units show a fine upward cycle up to U5 and a reverse coarse loop until U9. This division leads to a new interpretation to propose an evolution from a shoreface depositional environment controlled by deltaic currents (U1) to an offshore depositional environment with anoxic conditions (U2). In this basin, a system of submarine fan is developed, feeding a network of sand injections (injectites) covering the Bangombé plateau (70 km²) and with a thickness of 150 m affecting U4 to U7, including the Mn-protore. The protore depositional environment formed below the wave base limit (U4, U5 and U6) in a starved basin, controlled by biochemical sedimentation allowed the formation of Mn-carbonates. The end of starved basin, would allow the re-opening of the detrital input into the offshore basin (U7). This basin is then filled by storm bar deposits intersected by deltaic sub-aquatic channels (U8). The U9 unit corresponds to a quiet lagoon environment, allowing the multicellular organism development for the first time on the planet.A geochemical study allowed the characterization of the depositional environment of Mn-carbonates as an anoxic to sub-oxic and alkaline environment. For the first time, we showed that the manganese carbonates, present as bacteriomorph forms, are precipitated from the seawater by the mediated photosynthetic cyanobacterial activity, which allows CO2 / HCO3 depression of the environment and a local increase of pH. The cyanobacterial activity is controlled by the absence of bottom currents, which increase the detrital input. This would stop the activity of the cyanobacteria and thus would lead to the decrease of the Mn-concentration along the protore.Finally, well-log and a sequential correlation analyses allowed us to detail spatial and timing repartition of FB Formation deposit, controlled by a tectono-sedimentary model. We propose two- tectono-sedimentary phases. A first syn-tectonic phase (U1 to U3) controls the depocentres and sedimentation gaps. Turbidite coarse deposits are located in the most subsident part, clay deposits rather on the slope and carbonates on shoals. A second post-tectonic phase (U4 to U7) allows isopach deposits. The Mn-protore formed during the post-tectonic phase. However, it shows a variable thickness due to subsidence to the north of the Bangombé plateau. So, on the Bangombé plateau, Mn-contents increase towards the south, whereas the protore thickness increases towards the NNE. Moreover sand injectites decrease Mn-content in the eastern part of the Bangombé plateau and impact on the economic evaluation of the Mn-carbonates. Currently, the protore is structured by post-sedimentary faults, which lead to a non-continuity of the high Mn levels on the Bangombé plateau.
Le Bassin de Franceville situé au SE du Gabon présente une série de black shales (Formation FB) d'âge Paléoprotérozoïque (2,1 Ga) surmontant les grès de la Formation FA. Ce bassin peu déformé et non métamorphique représente une archive exceptionnelle des processus de dépôt de cette période de l’histoire de la Terre où la vie commence à se développer. En particulier, la Formation FB contient le protore d'un gisement mondial d'oxydes de manganèse exploité par la société Eramet-Comilog. L’objectif de ce travail est de préciser les conditions de formation de ce protore et de le replacer dans l’histoire du remplissage du bassin. Ce protore d'une épaisseur moyenne de 75 m est constitué de carbonates de manganèse ; il a fait l'objet d'une récente campagne de 24 forages carottés d'une profondeur moyenne de 125 m sur le plateau de Bangombé.A travers une approche pluridisciplinaire comprenant l'étude de ces forages et des affleurements clefs du bassin, ce travail porte sur la caractérisation i) de l'environnement de dépôt du protore et des séries qui l'encadrent (du toit du FA au toit du FB) ; ii) du mode de formation des carbonates de Mn à 2,1 Ga et iii) de l'architecture et de la répartition des hautes teneurs en Mn du protore qui représente un gisement potentiel du futur.L’étude pétro-sédimentaire détaillée a permis de distinguer neuf unités (U1 à U9) au sein de la Formation FB organisées suivant un cycle rétrogradant jusqu’à U5 puis progradant jusqu’à U9. Ce découpage montre une évolution du milieu de dépôt depuis un domaine de shoreface contrôlé par des courants deltaïques (U1) évoluant vers des dépôts d’offshore restreint (U2). Ce bassin enregistre ensuite un système de chenaux-levées turbiditiques (U3) qui alimentent un réseau d'injectites reconnu sur l’ensemble du Pl. de Bangombé et qui traverse 150 m de série (U4 à U7) en affectant le protore et ainsi les teneurs en Mn. L'environnement de dépôt du protore (U5 et U6) marque l’isolement du bassin qui devient affamé et contrôlé par une sédimentation biochimique à l’origine du dépôt des carbonates de Mn. L'Unité 7 correspond à la réouverture des apports détritiques en domaine d'offshore supérieur puis en domaine de shoreface dominé par des dépôts de tempêtes et de chenaux sous-aquatiques deltaïques (U8), et enfin lagunaire (U9) dans lequel apparaissent les premiers métazoaires de l’histoire de la planète, suivant une séquence régressive.Une étude géochimique a permis de préciser les conditions de dépôt du protore qui se forme en milieu alcalin anoxique à sub-oxique. Dans ce milieu, nous montrons pour la première fois une précipitation directe des carbonates de Mn sous forme bactériomorphe induite par l'activité photosynthétique des cyanobactéries qui consomment le CO2/HCO3 et conduisent à une augmentation du pH favorable à la formation des carbonates de Mn. L'activité cyanobactérienne est conditionnée par l’absence de courants de fond qui augmentent la turbidité du milieu et stoppent cette dernière.Les corrélations diagraphiques et séquentielles permettent de préciser la répartition spatiale et temporelle du FB permettant ainsi de replacer le protore dans l’histoire tectono-sédimentaire du bassin. Une première phase syn-tectonique (U1 à U3) contrôle l’épaisseur et la mise en place de dépôts turbiditiques dans les parties subsidentes, de dépôts argileux sur les pentes et de dépôt de carbonates sur les hauts-fonds. La seconde phase post tectonique (U4 à U7) permet la mise en place de dépôts relativement isopaques, bien que le protore enregistre une subsidence plus importante au nord du Pl. de Bangombé. On observe ainsi, sur le Plateau de Bangombé, des teneurs en Mn qui augmentent vers le sud alors que l’épaisseur du protore augmente vers le NNE. Postérieurement au dépôt du FB, le protore est structuré par des failles qui le compartimentent en touches de piano limitant ainsi sa continuité sur le Plateau de Bangombé.
https://hal.archives-ouvertes.fr/tel-01621460

tel-01621460
https://hal.archives-ouvertes.fr/tel-01621460
https://hal.archives-ouvertes.fr/tel-01621460/document
https://hal.archives-ouvertes.fr/tel-01621460/file/these_Dubois2017-MnGabon.pdf

Éditeur(s) : American Geophysical Union
Résumé : We use seismic reflection and rock sample data to propose that the first-order physiography of New Caledonia Trough and Norfolk Ridge formed in Eocene and Oligocene time and was associated with the onset of subduction and back-arc spreading at the Australia-Pacific plate boundary. Our tectonic model involves an initial Cretaceous rift that is strongly modified by Cenozoic subduction initiation. Hence, we are able to explain (1) complex sedimentary basins of inferred Mesozoic age; (2) a prominent unconformity and onlap surface of middle Eocene to early Miocene age at the base of flat-lying sediments beneath the axis of New Caledonia Trough; (3) gently dipping, variable thickness, and locally deformed Late Cretaceous strata along the margins of the trough; (4) platform morphology and unconformities on either side of the trough that indicate a phase of late Eocene to early Miocene uplift to near sea level, followed by rapid Oligocene and Miocene subsidence of similar to 1100-1800 m; and (5) seismic reflection facies tied to boreholes that suggest absolute tectonic subsidence at the southern end of New Caledonia Trough by 1800-2200 m since Eocene time. The Cenozoic part of the model involves delamination and subduction initiation followed by rapid foundering and rollback of the slab. This created a deep (>2 km) enclosed oceanic trough, similar to 2000 km long and 200-300 km across, in Eocene and Oligocene time as the lower crust detached, with simultaneous uplift and local land development along basin flanks. Disruption of Late Cretaceous and Paleogene strata was minimal during this Cenozoic phase and involved only subtle tilting and local reverse faulting or folding. Basin formation was possible through the action of at least one detachment fault that allowed the lower crust to either be subducted into the mantle or exhumed eastward into Norfolk Basin. We suggest that delamination of the lithosphere, with possible mixing of the lower crust back into the mantle, is more widespread than previously thought and may be commonly associated with subduction initiation, such as Cenozoic events in the Mediterranean and western Pacific.
Tectonics (0278-7407) (American Geophysical Union), 2010-03 , Vol. 29 , N. TC2004 , P. 1-16

Droits : Copyright 2010 by the American Geophysical Union.
http://archimer.ifremer.fr/doc/00001/11271/9283.pdf
DOI:10.1029/2009TC002476
http://archimer.ifremer.fr/doc/00001/11271/

Éditeur(s) : HAL CCSD
Résumé : 38 pages
Rapport
The Chicxulub impact crater, México, is unique. It is the only known terrestrial impact structure that has been directly linked to a mass extinction event and the only terrestrial impact with a global ejecta layer. Of the three largest impact structures on Earth, Chicxulub is the best preserved. Chicxulub is also the only known terrestrial impact structure with an intact, unequivocal topographic peak ring. Chicxulub’s role in the Cretaceous/Paleogene (K-Pg) mass extinction and its exceptional state of preservation make it an important natural laboratory for the study of both large impact crater formation on Earth and other planets and the effects of large impacts on the Earth’s environment and ecology. Our understanding of the impact process is far from complete, and despite more than 30 years of intense debate, we are still striving to answer the question as to why this impact was so catastrophic.During International Ocean Discovery Program (IODP) Expedition 364, Paleogene sediments and lithologies that make up the Chicxulub peak ring were cored to investigate (1) the nature and formational mechanism of peak rings, (2) how rocks are weakened during large impacts, (3) the nature and extent of post-impact hydrothermal circulation, (4) the deep biosphere and habitability of the peak ring, and (5) the recovery of life in a sterile zone. Other key targets included sampling the transition through a rare midlatitude section that might include Eocene and Paleocene hyperthermals and/or the Paleocene/Eocene Thermal Maximum (PETM); the composition and character of the impact breccias, melt rocks, and peak-ring rocks; the sedimentology and stratigraphy of the Paleocene–Eocene Chicxulub impact basin infill; the chronology of the peak-ring rocks; and any observations from the core that may help us constrain the volume of dust and climatically active gases released into the stratosphere by this impact. Petrophysical property measurements on the core and wireline logs acquired during Expedition 364 will be used to calibrate geophysical models, including seismic reflection and potential field data, and the integration of all the data will calibrate impact crater models for crater formation and environmental effects. The proposed drilling directly contributes to IODP Science Plan goals:Climate and Ocean Change: How resilient is the ocean to chemical perturbations? The Chicxulub impact represents an external forcing event that caused a 75% level mass extinction. The impact basin may also record key hyperthermals within the Paleogene.Biosphere Frontiers: What are the origin, composition, and global significance of subseafloor communities? What are the limits of life in the subseafloor? How sensitive are ecosystems and biodiversity to environmental change? Impact craters can create habitats for subsurface life, and Chicxulub may provide information on potential habitats for life, including extremophiles, on the early Earth and other planetary bodies. Paleontological and geochemical studies at ground zero will document how large impacts affect ecosystems and effects on biodiversity.Earth Connections/Earth in Motion: What are the composition, structure and dynamics of Earth’s upper mantle? What mechanisms control the occurrence of destructive earthquakes, landslides, and tsunami? Mantle uplift in response to impacts provides insight into dynamics that differ between Earth and other rocky planets. Impacts generate earthquakes, landslides, and tsunami, and scales that generally exceed plate tectonic processes yield insight into effects, the geologic record, and potential hazards.IODP Expedition 364 was a Mission Specific Platform expedition to obtain subseabed samples and downhole logging measurements from the sedimentary cover sequence and peak ring of the Chicxulub impact crater. A single borehole was drilled into the Chicxulub impact crater on the Yucatán continental shelf, recovering core from 505.7 to 1334.73 m below seafloor with ~99% core recovery and acquiring downhole logs for the entire depth.
International Ocean Discovery Program

hal-01639520
https://hal.archives-ouvertes.fr/hal-01639520
DOI : 10.14379/iodp.pr.364.2017

Éditeur(s) : Elsevier Sci Ltd
Résumé : Several marine geophysical data and piston-coring surveys acquired during the last decade allow one to better understand the close dynamic interactions between the sand-rich Orinoco turbidite system and the compressional structures of the Barbados prism. These interactions have been active since Eocene time as illustrated by the study of outcrops onshore Barbados Island. Because of strong morphologic and tectonic control in the east-Caribbean active margin, the present-day Orinoco turbiditic pattern system does not exhibit a classic fan geometry. The sea-floor geometry between the slope of the front of the Barbados prism and the slope of the South-American margin induces the convergence of the turbidite channels toward the abyssal plain, at the front of the accretionary prism. Also, whereas in most passive margins the turbidite systems are organized upstream to downstream as canyon, channel-levee and lobes, here, due to the tectonic control, the sedimentary system is organized upstream to downstream as channel-levee, canyons and channelized lobes. Indeed, at the edge of the Orinoco platform, the system has multiple sources with several distributaries and downstream the channel courses are complex with frequent convergences or divergences that are emphasized by the effects of the undulating seafloor tectonic morphologies associated with active thrust tectonics and mud volcanism. On top of the accretionary prism, turbidite sediments are filling transported piggy-back basins whose timing of sedimentation vs. deformation is complex. While erosion processes are almost absent on the highly subsiding Orinoco platform and in the upper part of the turbidite system, they develop mostly between 2000 and 4000 m of water depth, above the compressional structures of the Barbados prism (canyons up to 3 km wide and 300 m deep). In the abyssal plain, the main turbiditic channel develops toward the east and connects with the Vidal mid-Atlantic channel. The sediments transported in this channel are filling several elongated basins linked with fracture zones (notably the Barracuda Basin), and finally end their course in the Puerto-Rico trench, the deepest morphologic depression of the region. Piston-cores have demonstrated that turbidite sediments above the accretionary prism and in the abyssal plain are mostly coarse sandy deposits covered by recent pelagic planktonic-rich sediments, which corresponds to slower sand deposition during the post-glacial sea level rise. Numerical stratigraphic modelling suggests that during the last glacial event, the main depocentres were located above the tectonic prism and in the abyssal plain, at the front of the prism and that, during the Holocene eustatic rise, a large accommodation space formed on the shelf confining sedimentation mostly on the Orinoco deltaic platform and producing a starvation downstream in the turbidite system.
Marine And Petroleum Geology (0264-8172) (Elsevier Sci Ltd), 2015-06 , Vol. 64 , P. 76-103

Droits : 2015 Elsevier Ltd. All rights reserved.
http://archimer.ifremer.fr/doc/00252/36373/34913.pdf
DOI:10.1016/j.marpetgeo.2014.12.015
http://archimer.ifremer.fr/doc/00252/36373/

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Maguelone shore extends along the northern coast of the Gulf of Lions, west of the Rhone Delta and east of high-gradient coastal streams that have provided most of the clastic sediments to the Gulf of Lions margin since the early Miocene. This 10 km-wide area is constituted by a small coastal watershed (15 km long) in low-lying carbonate hills, a kilometre-wide marsh, a sandy beach barrier and a shoreface experiencing local low sedimentation rates. This onshore-offshore transition zone is a key area to understand the relationships between erosion, by-pass, deposition and preservation processes. Unlike the neighbouring Rhone deposits that display numerous thick deltaic sequences related to a continuous sediment flux, the Maguelone shore exhibits peculiar sedimentary bodies. The analysis of about 250 km of new VHR seismic profiles acquired over the study area, 9 short cores and outcrops data allowed us to determine the three-dimensional high-resolution geometry of the coastal system tracts from Quaternary to present-day. This revealed dominant denudation processes in the Upstream catchments associated with the formation of incised valleys during Quaternary lowstands. In addition, this study investigates the erosion and deposition mechanisms controlled by littoral hydrodynamics that have been taken place on this shore since the last transgression. In particular, metre-high and hundreds of metre-long sandy bodies constructed by alongshore hydrodynamics were identified and their effect on the morphodynamics of the whole littoral system is discussed. The Maguelone shore can be used as an experimental study for onshore/offshore dynamics under the influence of microtidal wave/current hydrodynamics and very low river-derived sediment flux during a eustatic cycle. Geometry of system tracts across flood plain to shoreface is usually considered to be controlled by relative sea-level changes, and is successfully analysed with 2D sequence stratigraphy cross-shore models. It is observed that in areas like the Maguelone shore, traditional sequence stratigraphy methods might not be fully relevant and need to integrate alongshore hydrodynamical processes.
ISSN: 0025-3227

hal-00421060
https://hal.archives-ouvertes.fr/hal-00421060
DOI : 10.1016/j.margeo.2009.06.008

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
After Jurassic rifting, numerous carbonate platforms (i.e., the Orizaba, Cordoba and Golden Lane-Tuxpan platforms) developed during the Lower and Middle Cretaceous episode of thermal subsidence along the western passive margin of the Gulf of Mexico, with intervening basinal domains (i.e., the Tampico-Misantla, Zongolica, Veracruz and Deep Gulf of Mexico - DGM - basins).;During the Late Cretaceous-Paleocene, the east-verging Sierra Madre Oriental thrust belt developed, resulting in tectonic uplift and unroofing of the allochthonous units (i.e. tectonic units made up of former Orizaba and Cordoba platforms and Zongolica Basin series). This new topography provided also an important source of clastics to feed the adjacent foredeep, where coeval tectonic loading accounted for the bending of the foreland lithosphere. However, shallow water facies or even emersion persisted until the Eocene in the forebulge area (at the present location of the Golden Lane), preventing locally the clastics to reach the DGM. This topographic barrier was ultimately bypassed by the clastics only during the Oligocene and Neogene, once (1) the prograding clastic wedge had exceeded accommodation, and (2) the long lasting thermal subsidence of the passive margin could overpass the effect of the bending and force the former bulge to sink.;Numerous paleo-thermo-meters (Tmax, Ro), paleo-thermo-barometers (fluid inclusions), PVT and coupled forward kinematic and thermal modeling have been used to calibrate and date the progressive unroofing of the thrust belt. Coupled tectonic and sedimentologic modeling was applied in the foreland to predict the distribution of sand versus shale ratios in the Oligocene to Plio-Quaternary clastic sedimentary wedge of the passive margin, where gravitational gliding of post-Eocene series occurred during the Neogene along major listric faults.;Mantle dynamics are advocated as the main process accounting for post-orogenic uplift and regional tilting of the basement, which initiated a massive transfer of sediments from the Cordillera towards the Gulf of Mexico, from Oligocene onward, resulting in a destabilization and gravitational collapse of the western slope of the Gulf of Mexico in Neogene times.
ISSN: 0040-1951

hal-00445248
https://hal.archives-ouvertes.fr/hal-00445248
DOI : 10.1016/j.tecto.2009.04.012

Éditeur(s) : HAL CCSD Blackwell Publishing
Résumé : International audience
In the Causses platform (south-east France), Late Hettangian to Sinemurian deposits were interpreted previously as shallow-water carbonate ramp deposits. A new look at these deposits has shown a fault-controlled mosaic carbonate platform that is different from the carbonate ramp models. Within the platform mosaic, 15 lithofacies have been recognized, which are organized in four facies associations, including peritidal, restricted shallow sub-tidal, sand dunes and sub-tidal shelf facies associations. The rapid lateral and vertical facies changes, and the lack of consistent landward or seaward direction indicated by the pattern of facies changes, question the existence of a shoreline suggested by the traditional models for this region. Instead, the facies organization and cycle stacking pattern suggest deposition in a mosaic of intertidal islands between which sub-tidal restricted or open conditions could coexist in very close proximity. Such a platform mosaic would have been defined by tectonic activities along normal faults which segmented the shallow-water Causses platform. The facies and facies associations are arranged into metre-scale, peritidal and sub-tidal cycles that are also variable. Certain cycles show the same stacking pattern in all the sections and seem to be traceable over tens of kilometres. On the contrary, other cycles cannot be correlated; they are present only in specific sections and have a maximum lateral extension of 1 or 2 km. These metre-scale cycles stack to form four medium-scale cycles bounded by surfaces that display sub-aerial exposure features. Medium-scale cycles stack into two larger-scale cycles (tens of metres thick) and are bounded by well-defined karstic surfaces. Based on their lateral continuity and their stacking pattern, the metre-scale cycles are controlled probably by high frequency eustatic variations overprinting the topographic irregularities formed by differential subsidence of fault-bounded blocks. Episodic fault activities may reorganize the topography so that, even if eustatic changes may still be the major control of cycles, the expression and number of cycles could be different. Cycles of medium and large-scale are interpreted as being allogenic, controlled by changes in eustasy and/or subsidence rates as evidenced by their lateral continuity and the correlations of the large-scale cycles with third-order depositional sequences.
ISSN: 1469-3496

hal-00411940
https://hal.archives-ouvertes.fr/hal-00411940
DOI : 10.1111/j.1365-3091.2007.00896.x

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
The structure and dynamic evolution of a mountain belt piedmont are controlled by strong interactions between tectonics, surface processes (erosion, sedimentation), and climate. Studying these couplings relies on detailed geometric and kinematic analysis of morphostructural markers (folds, faults, terraces, alluvial surfaces) and analysis of syntectonic sedimentation. To study quantitatively how these markers form, evolve and record deformation, we developed a new analogue modelling approach using a specific composite granular material. The originality stands in the simultaneous modelling of orogenic deformation mechanisms and erosion-transport-sedimentation processes, but also in the use of techniques allowing quantitative measurement of morphostructural evolution. This methodology opens new perspectives in the fields of geomorphology (relief dynamics), seismotectonics (study of active faults), and sedimentology (including sequential stratigraphy).
ISSN: 0010-7999

hal-00411972
https://hal.archives-ouvertes.fr/hal-00411972
DOI : 10.1016/j.crte.2008.01.005

Éditeur(s) : HAL CCSD Elsevier
Résumé : A synthesis of backscatter imagery coupled with a large 3D seismic dataset in the Lower Congo Basin (LCB) reveals a patchy distribution of features interpreted to be associated with fluid seepage from 300 m to 2500 m water depth. With the exception of one region of anomalous backscatter positive-relief mounds, all inferred seep sites occur in negative-relief pockmarks. The extensive 3D seismic dataset in the LCB offers a unique opportunity to study the plumbing system that is feeding surface cold seep systems, and in general, to reconstruct the relationship between tectonics and fluid flow in continental margins. The fluid seeps in the LCB are associated with morphologically, stratigraphically or tectonically controlled focused fluid flow. The integration of the geophysical datasets, backscatter imagery coupled to 3D seismic, clearly indicates that fluid seeps are not randomly distributed, but their seabed organization reflects 1) the location of the underlying structure (reservoir or trap) where the fluids are coming from, 2) the geometry and morphology of the reservoir/trap, and 3) the discontinuities in the sedimentary column along which fluids have migrated. In the LCB seafloor pockmarks are always associated with underlying tectonic structures (fault zones, salt diapirs, polygonal faults) or buried sedimentary bodies (turbiditic channels, erosional surfaces), whereas they never occur above sub-horizontal parallel-stratified fine-grained sediments. Even if triggering processes can not be clearly defined here, we propose a model of seafloor fluid seep organization, which represents a new tool for identifying the geometry of flow pathways and the underlying buried bodies where the fluids are originating from. This qualitative 3D model provides insight into the geohydrologic processes of continental margins.
ISSN: 0025-3227

hal-00406640
https://hal.archives-ouvertes.fr/hal-00406640
DOI : 10.1016/j.margeo.2007.06.003

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The marine Messinian deposits of Tunisia cover a narrow littoral strip some 300 km long between the northern Bizerte and Cap Bon areas and the central-eastern Sahel region. Litho- and biofacies analysis of six stratigraphic sections reveals the distinctive features of these deposits.;The lower Messinian deposits are characterized by ubiquitous siliciclastics and abundant oolitic/bioclastic limestones organized in an eastward facing ramp. Westward (landward), this ramp changes into coastal lagoons, sometimes containing evaporites. Eastward, the ramp passes to the reefal Pelagian Platform extending as far as Lampedusa.;Two main sedimentary cycles are distinguished: 1) an early Messinian siliciclastic retrogradational then oolitic/bioclastic progradational cycle (Beni Khiar Formation and lower Oued bel Khedim Formation): 2) a late Messinian brackish to continental cycle that probably accumulated in rapidly subsiding lagoons (Cued el Bir Formation and upper Oued bel Khedim Formation). The Tunisian early Messinian cycle is partly eustatically controlled, but the late Messinian cycle cannot be confidently correlated to other well-known Messinian series because of tectonic movements.;The lower Messinian deposits of Tunisia are also characterized by abundant suspension-feeding organisms (molluscs and bryozoans) and rare corals, calcareous algae, echinoids, and larger benthic foraminifers. The proposed palaeoenvironmental model shows that the lower Messinian ramp of Tunisia was located on a current-protected margin and subjected to continent-derived sediment and nutrient supply. Eastward, nutrient influx diminished and a shallow-water isolated carbonate platform with coralgal facies developed between the western and the eastern Mediterranean basins. The main hydrological connection between these two basins occurred through a narrow seaway situated to the northeast of the Pelagian Platform, south of Sicily and Malta.
ISSN: 0031-0182

hal-00475583
https://hal.archives-ouvertes.fr/hal-00475583
DOI : 10.1016/j.palaeo.2009.10.028