Résumé : The slides were taken on collecting trips sponsored by the William L. Bryant Foundation, where books, music and art indigenous to the regions were gathered. The are organized by geographical location.
In Trinidad and Tobago, cocoa production is monitored by the Cocoa and Coffee Industry Board, which was established in 1961. Cocoa, used to make chocolate, is a traditional export crop in the country. Buildings like those pictured would be used for processing, drying, sorting, and storing cocoa beans. In this image, several children and adults can be found in the yard near buildings on the cocoa plantation. The buildings are made with wood and have zinc paneled roofs, some of the steps are made of concrete. The level flat area between the buildings on the far right would be used to dry cocoa beans. The beans would be spread out evenly on this area, then raked and turned so that beans were exposed to the sun for adequate drying. Slide labeled Cocoa Plantation Trinidad.
Trinidad and Tobago -- South America -- Trinidad
Trinidad and Tobago -- Caribbean region -- Trinidad

Droits : All rights to images are held by the respective holding institution. This image is posted publicly for non-profit educational uses, excluding printed publication. For permission to reproduce images and/or for copyright information contact Special Collections & University Archives, University of Central Florida Libraries, Orlando, FL 32816 phone (407) 823-2576, email: speccoll@mail.ucf.edu
CFM1972_01a
http://ufdc.ufl.edu/AA00031228/00001

Éditeur(s) : HAL CCSD Public Library of Science
Résumé : International audience
Challenging evaluation of tropical forest biodiversity requires the reporting of taxonomic diversity but also the systematic characterization of wood properties in order to discover new promising species for timber industry. Among wood properties, the dimensional stability is regarded as a major technological characteristic to validate whether a wood species is adapted to commercial uses. Cell structure and organization are known to influence the drying shrinkage making wood density and microfibrils angle markers of choice to predict wood dimensional stability. On the contrary the role of wood extractive content remains unclear. This work focuses on the fast-growing tropical species Bagassa guianensis and we report herein a correlation between heartwood drying shrinkage and extractive content. Chemical extractions and shrinkage experiments were performed on separate wood twin samples to better evaluate correctly how secondary metabolites influence the wood shrinkage behaviour. Extractive content were qualitatively and quantitatively analysed using HPLC and NMR spectroscopy. We found that B guianensis heartwood has a homogeneous low shrinkage along its radius that could not be explained only by its basic density. In fact the low drying shrinkage is correlated to the high extractive content and a corrected model to improve the prediction of wood dimensional stability is presented. Additionally NMR experiments conducted on sapwood and heartwood extracts demonstrate that secondary metabolites biosynthesis occurs in sapwood thus revealing B. guianensis as a Juglans-Type heartwood formation. This work demonstrates that B. guianensis, a fast-growing species associated with high durability and high dimensional stability, is a good candidate for lumber production and commercial purposes.
ISSN: 1932-6203

hal-01392725
https://hal.archives-ouvertes.fr/hal-01392725
https://hal.archives-ouvertes.fr/hal-01392725/document
https://hal.archives-ouvertes.fr/hal-01392725/file/2016_BossuBeaucheneEstevezDuplaisClair_PlosOne_WoodDimentionalStabilityAndSecondaryMetabolites.pdf
DOI : 10.1371/journal.pone.0150777.s005

Éditeur(s) : HAL CCSD De Gruyter
Résumé : COST Action E35 : Fracture mechanics and micromechanics of wood and wood composites with regard to wood machining
The data available in the literature concerning wood cutting forces permits to build models or to simulate the main wood machining processes ( milling, sawing, peeling, etc.). This approach contributes to a better understanding of formation of wood surfaces and chips and the data may be helpful to optimise cutting geometry, reduce tool wear, improve tool material, and to size tool-machines. The models may also be useful for industrial application in two ways: ( 1) providing data to optimise the settings for a given operation ( batch approach), and ( 2) building predictive models that could be the basis of an online control system for the machining processes ( interactive approach). A prerequisite for this is that numerous machining tests on different wood materials are performed based on experiences with different kind of tools and experimental devices. With a focus on potential industrial applications, the emphasis of this review was on the wood peeling process, which is a very demanding special case of wood cutting. Although not so many industrial machines are equipped with expensive force sensors, there is a lot of high quality information available about cutting forces which may be useful to improve the scientific or technological knowledge in wood machining. Alternative parameters, such as vibration or sound measurements, appear to be promising substitutes in the praxis, particularly to feed online control systems of any wood cutting process.
ISSN: 0018-3830

hal-01032121
https://hal.archives-ouvertes.fr/hal-01032121
DOI : 10.1515/HF.2009.014

Éditeur(s) : HAL CCSD De Gruyter
Résumé : International audience
The data available in the literature concerning wood cutting forces permit to build models or to simulate the main wood machining processes (milling, sawing, peeling etc.). This approach contributes to a better understanding of formation of wood surfaces and chips and the data may be helpful to optimize cutting geometry, reduce tool wear, improve tool material, and to size tool-machines. The models may also be useful for industrial application in two ways: (1) providing data to optimise the settings for a given operation (batch approach) and (2) building predictive models that could be the basis of an online control systems for the machining processes (interactive approach). A prerequisite for this is that numerous machining tests on different wood materials are performed based on experiences with different kind of tools and experimental devices. With potential industrial applications in focus, the emphasis of this review was on the wood peeling process, which is a very demanding special case of wood cutting. Though not so many industrial machines are equipped with expensive force sensors, there is a lot of high quality information available about cutting forces which may be useful to improve the scientific or technologic knowledge in wood machining. Alternative parameters, such as vibration or sound measurements, appear to be promising substitutes in the praxis, particularly to feed online control systems of any wood cutting process.
ISSN: 0018-3830

hal-00876003
https://hal.archives-ouvertes.fr/hal-00876003
https://hal.archives-ouvertes.fr/hal-00876003/document
https://hal.archives-ouvertes.fr/hal-00876003/file/LABOMAP_Holzforschung_2009_denaud.pdf
ENSAM : http://hdl.handle.net/10985/7419

Éditeur(s) : HAL CCSD Walter de Gruyter
Résumé :  
A method for measuring shrinkage resulting from drying in the three anisotropic directions is developed and tested. Measurements are performed on sawn discs, a technique which simplifies preparation and enables large numbers of measurements. Shrinkage values can be represented as a map of the disc surface. The results indicate that comparisons between shrinkage distribution and tension wood distribution on the discs show a clear relationship and can be measured with relatively high accuracy in reference to the "shrinkage map". In the long term, this method could be useful in the timber industry as a means for choosing the direction in which logs are cut depending on their type of wood composition.
Holzforschung

hal-01032055
https://hal.archives-ouvertes.fr/hal-01032055
DOI : 10.1515/HF.2003.100

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
A feasibility study of glulam was carried out in French Guiana using local wood species. The aim was to determine gluing parameters affording satisfactory behaviour to manufactured glulam in a tropical climate. Three abundant wood species, with special properties, were selected for the study and Resorcinol-Phenol-Formaldehyde resin was used for bonding. Three industrial parameters were considered: adhesive spread rate, closed assembly time and gluing pressure. Delamination and shearing tests were carried outin accordance with European Standards. The tests revealed the influence of wood properties and manufacturing parameters on joint resistance. In fact, the results showed that specific gravity and the shrinkage coefficientgreatly influenced the gluing step. Indeed, wood with a medium specific gravity needed more adhesive and more pressure than wood with a high specific gravity. In addition, planning and lamella thicknesswere found to affect glue joint resistance.
ISSN: 0018-3768

hal-00856933
https://hal.archives-ouvertes.fr/hal-00856933
https://hal.archives-ouvertes.fr/hal-00856933/document
https://hal.archives-ouvertes.fr/hal-00856933/file/Feasibility_glued_laminated_timber_Bourreau_al.pdf

Éditeur(s) : HAL CCSD
Résumé : The forests of French Guiana occupy a central part of the region’s potential resource base, but as yet remain almost completely unexploited. This stems from the forestry industry struggling to valorize wood stocks of a high diversity with an extremely heterogeneous distribution. Indeed, identifying essences for future propagation is an issue of both environmental and socio-economic importance for the region. Bagassa guianensis Aubl. and Cordia alliodora (Ruiz & Pav.) Oken. go against conventional models, in that they display the life history characteristics of rapid growth and wood of high quality, and thus are species of high potential for future plantations. Firstly, our study of growth characteristics reveals a defined strategy half way between long-lived species and pioneer species. It is the variability of basic density of wood which is a key trait allowing for such a development, favoring rapid growth in initial years whilst allowing for tree longevity. Secondly, the analysis of a range of wood properties (shrinkage, modulus of elasticity, durability) in relation to tree growth confirms the technologic quality of the two species. It also enables the emergence of new results like the effect of extractives on wood stability, the control of growth as a result of basic density variation, the evolution of leaf traits throughout tree development or the improvement of trunk maintenance thanks to interlocked grain. The knowledge gained in relation to the developmental traits of these two species, and to the quality of their wood allows for the elaboration of plantation projects and what will be required for their success. The results of this study can orientate future studies on novel species for commercialization in French Guiana.
La ressource forestière en Guyane occupe une place maîtresse au sein de la région et est encore majoritairement préservée, mais la filière bois parvient difficilement à valoriser la biodiversité locale en raison de l’hétérogénéité de la ressource. Identifier les essences à planter demain représente aujourd’hui un enjeu à la fois environnemental, économique et social pour la Guyane. Bagassa guianensis Aubl. et Cordia alliodora (Ruiz & Pav.) Oken. vont à l’encontre des modèles usuels en associant vitesse de croissance et qualité du bois et sont identifiées comme prometteuses pour la plantation. Dans un premier temps, l’étude de la dynamique de croissance des deux espèces révèle un modèle écologique singulier, à la fois pionnières et longévives. La variabilité de l’infradensité dans l’arbre est l’élément clé qui permet un tel développement, favorisant une croissance rapide dans les premières années tout en assurant la longévité de l’individu. Dans une seconde partie, l’analyse d’un large panel de propriétés du bois (retrait, module, durabilité) en lien avec le développement de l’arbre confirme les qualités technologiques des deux espèces et permet l’émergence de résultats novateurs tels que le rôle des extractibles sur le retrait, le contrôle de la croissance grâce aux variations d’infradensité, l’évolution des traits foliaires au cours de l’ontogénie ou encore la mise en place de contrefil dans l’arbre pour assurer son maintien. La connaissance acquise vis-à-vis du mode de développement de ces deux espèces et des facteurs influençant la qualité de leur bois permet aujourd’hui de définir avec plus de précision le cadre d’un projet de plantation et les conditions de son succès. Les résultats de cette étude permettent finalement d’orienter la recherche de nouvelles espèces d’avenir pour la plantation en Guyane.
https://tel.archives-ouvertes.fr/tel-01338281

tel-01338281
https://tel.archives-ouvertes.fr/tel-01338281
https://tel.archives-ouvertes.fr/tel-01338281/document
https://tel.archives-ouvertes.fr/tel-01338281/file/Th%C3%A8se%20Julie%20Bossu.pdf

Éditeur(s) : HAL CCSD Springer Verlag/EDP Sciences
Résumé : International audience
Context: Woodcutting is a very old technology but scientific research is scarce on the subject. In the last 50 years much work on basic mechanisms as well as industrial processes has been done in France. Aims: The specific nature of wood introduces strong differences between wood and metal cutting processes. The paper focuses on French teams' contributions. Results: The basic aspects of the tool–material interaction for different basic modes in woodcutting are highlighted. In primary conversion such as sawing, veneer cutting or green wood chipping, huge progress comes from automation and the possibility of linking the process to log and product quality through new sensors. In secondary processing much has been done on the links between the cutting process, surface qualification and the properties of these surfaces for further processing, such as gluing or coating. Tool wear depends on the cutting process, timber quality, and species. Trade-offs are required in tool technology and coating technologies may improve tool life. Conclusion: A large amount of knowledge and innovation has come from 50 years of worldwide research effort, with France being particularly active in this period. The transfer of skills from metals cutting industry was often a key, but much is needed to move closer to both metal cutting sector and woodcutting skills among craftsmen.
ISSN: 1286-4560

hal-01135156
https://hal.archives-ouvertes.fr/hal-01135156
https://hal.archives-ouvertes.fr/hal-01135156/document
https://hal.archives-ouvertes.fr/hal-01135156/file/Wood_machining_focus_French_research_Thibaut_al_2015.pdf
DOI : 10.1007/s13595-015-0460-2

Résumé : This cigar-making industry has contributed materially to the development and growth of Tampa during the last five years, and it promises much greater benefit in the future. It was in October, 1885, that Martinez Ybor & Co., who began manufacturing in Havana in 1854, and afterward put up a large factory in Key West, came to Tampa to investigate the resources and advantages offered for cigar-making. They soon afterward purchased forty acres of land in the Fourth Ward, cleared it of the pines, wild-oats and gophers, and built a factory, a large boarding-house or hotel, and several small cottages for the workmen whom they brought from Key West and Havana. The venture proved a success from the start and improvements were added. The original factory, a wooden structure, is now the opera house, and a large brick factory has succeeded the first one, where the daily output of the 450 cigar makers employed is40,000 to 50,000 cigars. Then came Sanchez & Haya, Emilio Pons, and others, and all declare that they are doing an excellent business.
(Funding) Funded in part by the Institute for Museum and Library Services (IMLS), Ephemeral Cities Project.
Tampa |z 1271000 |2 ceeus
Hillsborough County |z 12057 |2 ceeus
United States of America -- Florida -- Hillsborough County -- Tampa

Droits : All rights reserved. 2005.
C24-05718

Éditeur(s) : HAL CCSD
Résumé : The forests of French Guiana occupy a central part of the region’s potential resource base, but as yet remain almost completely unexploited. This stems from the forestry industry struggling to valorize wood stocks of a high diversity with an extremely heterogeneous distribution. Indeed, identifying essences for future propagation is an issue of both environmental and socio-economic importance for the region. Bagassa guianensis Aubl. and Cordia alliodora (Ruiz & Pav.) Oken. go against conventional models, in that they display the life history characteristics of rapid growth and wood of high quality, and thus are species of high potential for future plantations. Firstly, our study of growth characteristics reveals a defined strategy half way between long-lived species and pioneer species. It is the variability of basic density of wood which is a key trait allowing for such a development, favoring rapid growth in initial years whilst allowing for tree longevity. Secondly, the analysis of a range of wood properties (shrinkage, modulus of elasticity, durability) in relation to tree growth confirms the technologic quality of the two species. It also enables the emergence of new results like the effect of extractives on wood stability, the control of growth as a result of basic density variation, the evolution of leaf traits throughout tree development or the improvement of trunk maintenance thanks to interlocked grain. The knowledge gained in relation to the developmental traits of these two species, and to the quality of their wood allows for the elaboration of plantation projects and what will be required for their success. The results of this study can orientate future studies on novel species for commercialization in French Guiana.
La ressource forestière en Guyane occupe une place maîtresse au sein de la région et est encore majoritairement préservée, mais la filière bois parvient difficilement à valoriser la biodiversité locale en raison de l’hétérogénéité de la ressource. Identifier les essences à planter demain représente aujourd’hui un enjeu à la fois environnemental, économique et social pour la Guyane. Bagassa guianensis Aubl. et Cordia alliodora (Ruiz & Pav.) Oken. vont à l’encontre des modèles usuels en associant vitesse de croissance et qualité du bois et sont identifiées comme prometteuses pour la plantation. Dans un premier temps, l’étude de la dynamique de croissance des deux espèces révèle un modèle écologique singulier, à la fois pionnières et longévives. La variabilité de l’infradensité dans l’arbre est l’élément clé qui permet un tel développement, favorisant une croissance rapide dans les premières années tout en assurant la longévité de l’individu. Dans une seconde partie, l’analyse d’un large panel de propriétés du bois (retrait, module, durabilité) en lien avec le développement de l’arbre confirme les qualités technologiques des deux espèces et permet l’émergence de résultats novateurs tels que le rôle des extractibles sur le retrait, le contrôle de la croissance grâce aux variations d’infradensité, l’évolution des traits foliaires au cours de l’ontogénie ou encore la mise en place de contrefil dans l’arbre pour assurer son maintien. La connaissance acquise vis-à-vis du mode de développement de ces deux espèces et des facteurs influençant la qualité de leur bois permet aujourd’hui de définir avec plus de précision le cadre d’un projet de plantation et les conditions de son succès. Les résultats de cette étude permettent finalement d’orienter la recherche de nouvelles espèces d’avenir pour la plantation en Guyane.
https://tel.archives-ouvertes.fr/tel-01430243

Droits : info:eu-repo/semantics/OpenAccess
NNT : 2015YANE0002
tel-01430243
https://tel.archives-ouvertes.fr/tel-01430243
https://tel.archives-ouvertes.fr/tel-01430243/document
https://tel.archives-ouvertes.fr/tel-01430243/file/julie-bossu.pdf

Résumé : This label was owned by P. San Martin and Companyand later called the San Martin & Leon Cigar Factory.
(Funding) Funded in part by the Institute for Museum and Library Services (IMLS), Ephemeral Cities Project.
Tampa |z 1271000 |2 ceeus
Hillsborough County |z 12057 |2 ceeus
United States of America -- Florida -- Hillsborough County -- Tampa

Droits : All rights reserved. 2005.
P21-0256

Éditeur(s) : HAL CCSD De Gruyter
Résumé : A method for measuring shrinkage resulting from drying in the three anisotropic directions is developed and tested. Measurements are performed on sawn discs, a technique which simplifies preparation and enables large numbers of measurements. Shrinkage values can be represented as a map of the disc surface; the results indicate that comparisons between shrinkage distribution and tension wood distribution on the discs show a clear relationship and can be measured with relatively high accuracy in reference to the "shrinkage map". In the long term, this method could be useful in the timber industry as a means for choosing the direction in which logs are cut depending on their type of wood composition.
ISSN: 0018-3830

hal-00004531
https://hal.archives-ouvertes.fr/hal-00004531
https://hal.archives-ouvertes.fr/hal-00004531/document
https://hal.archives-ouvertes.fr/hal-00004531/file/Holzforschung2003_Clair-Jaouen-Beauchene-Fournier_ccsd.pdf